SAMSUNG LN40M81BD User Manual [en, es]
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care center.
Contacte con SAMSUNG WORLD-WIDE
Si tiene alguna pregunta o comentario referente a nuestros productos,
por favor contacte con nuestro Servicio de Atención al Cliente.
Country
ARGENTINE 0800-333-3733 www.samsung.com/ar
BRAZIL 4004-0000 www.samsung.com/br
CHILE 800-726-7864 (SAMSUNG) www.samsung.com/cl
COLOMBIA 01 8000 112 112 www.samsung.com/co
COSTA RICA 0-800-507-7267 www.samsung.com/latin
ECUADOR 1-800-10-7267 www.samsung.com/latin
EL SALVADOR 800-6225 www.samsung.com/latin
GUATEMALA 1-800-299-0013 www.samsung.com/latin
JAMAICA 1-800-234-7267 www.samsung.com/latin
MEXICO 01-800-SAMSUNG (7267864) www.samsung.com/mx
PANAMA 800-7267 www.samsung.com/latin
PUERTO RICO 1-800-682-3180 www.samsung.com/latin
REP.DOMINICANA 1-800-751-2676 www.samsung.com/latin
TRINIDAD &TOBAGO 1-800-7267-864 www.samsung.com/latin
VENEZUELA 1-800-100-5303 www.samsung.com/latin
IMPORTADO POR:SAMSUNG ELECTRONICS MÉXICO.S.A.de C.V.
Vía Lopez Portillo No.6,
Col.San Fco.Chilpan
Tultitlán,Estado de México,C.P.54940
TEL.01-55-5747-5100 / 01-800-726-7864
Customer Care Center
Web Site
LN40M81BD
LN40N81BD
LN46M81BD
LN46N81BD
LN52N81BD
TFT-LCD TELEVISION
EXPORTADO POR:Samsung Electronics CO.,LTD.
416,Mae tan-3dong,Yeongtong -gu,
Suwon City,Gyeonggi-do Korea
BN68-01178D-00
Owner’s
Instructions
Register your product at www.samsung.com/global/register
Record your Model and Serial number here for future reference.
· Model __________ · Serial No. ____________
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen
• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.
This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the
left, right and center of the screen caused by the difference of light emission on the screen.
Playing a DVD or a game console may cause a similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
Precauciones al mostrar en la pantalla una imagen fija
La imagen fija puede causar daños permanentes en la pantalla del televisor.
• No deje una imagen fija en la pantalla LCD durante más de dos horas ya que se podría producir una retención de la imagen en
la pantalla. Este fenómeno de retención de imágenes también se denomina “quemadura de pantalla”.
Para evitar que se produzca esa persistencia de la imagen, reduzca el nivel de luminosidad y de contraste de la pantalla
cuando muestre imágenes fijas.
• El uso del televisor LCD en formato 4:3 durante un tiempo prolongado puede dejar rastros de bordes en las
partes izquierda, derecha y central de la pantalla debido a las diferencias en la emisión lumínica de la pantalla.
La reproducción de un DVD o el uso de una consola de videojuegos pueden provocar un efecto similar en la
pantalla. Reproducir un DVD o una videoconsola puede causar un efecto similar en la pantalla. La garantía no
cubre estos daños.
• Ver imágenes fijas de videojuegos y PC durante más tiempo del indicado puede producir restos de imágenes parciales.
Para evitar este efecto, reduzca el ‘brillo’ y el ‘contraste’ cuando vea imágenes fijas.
© 2007 Samsung Electronics Co., Ltd. All rights reserved.
Contents
English
GENERAL INFORMATION
■
List of Features .................................................................... 2
■
Accessories .........................................................................2
■
Viewing the Control Panel .................................................. 3
■
Viewing the Connection Panel ...........................................4
■
Remote Control ................................................................... 5
■
Installing Batteries in the Remote Control ........................... 6
CONNECTIONS
■
Connecting VHF and UHF Antennas ................................... 6
■
Connecting Cable TV .......................................................... 7
■
Connecting a VCR ............................................................... 8
■
Connecting a Camcorder ...................................................9
■
Connecting a DVD Player/Set-Top Box ...............................9
■
Connecting a DVD Player/Set-Top Box via HDMI ............. 10
■
Connecting a DVD Player/Set-Top Box via DVI ................10
■
Connecting a Digital Audio System ................................... 11
■
Connecting an Amplier/DVD Home Theater .................... 11
■
Connecting a PC ............................................................... 11
OPERATION
■
Turning the TV On and Off ................................................12
■
Plug & Play Feature ..........................................................12
■
Changing Channels ...........................................................13
■
Adjusting the Volume ......................................................... 14
■
Viewing the Display ........................................................... 14
■
Viewing the Menus ............................................................15
■
Memorizing the Channels .................................................. 15
■
Setting Up Your Remote Control .......................................17
■
Remote Control Codes ......................................................19
■
To Select the Source .........................................................22
■
To Edit the Input Source Name .........................................22
PICTURE CONTROL
■
Using Automatic Picture Settings ...................................... 23
■
Adjusting the Color Tone ...................................................24
■
Adjusting the Detailed Settings .........................................25
■
Changing the Screen Size ................................................. 28
■
Setting the Active Color .....................................................29
■
DNIe (Digital Natural Image engine) .................................29
■
Freezing the Picture ..........................................................30
■
Setting the Film Mode .......................................................30
■
HDMI Black Level ..............................................................30
■
Viewing Picture-in-Picture ................................................. 31
SOUND CONTROL
■
Customizing the Sound ..................................................... 33
■
Using Automatic Sound Settings .......................................33
■
Setting the TruSurround XT ............................................... 34
■
Choosing a Multi-Channel Sound (MTS) track - Digital .... 34
■
Choosing a Multi-Channel Sound (MTS) track - Analog ... 35
■
Automatic Volume Control ................................................. 35
■
Selecting the Internal Mute ................................................ 36
■
Setting the On/Off Melody .................................................36
■
Listening to the Sound of the Sub (PIP) Picture ................ 37
■
Resetting the Sound Settings to the Factory Defaults....... 37
■
Connecting Headphones ...................................................37
■
■
C
CHANNEL CONTROL
Selecting the Antenna ....................................................... 38
■
Clearing Scrambled Channels - Digital .............................38
■
Setting the Channel Lists ..................................................39
■
To set-up Your Favorite Channels .....................................40
■
Using the Channel Lists ....................................................41
■
Viewing the Channel Lists ................................................. 41
■
Labeling Channels ............................................................. 42
■
LNA (Low Noise Amplier) ................................................. 42
■
Fine Tuning Analog Channels ........................................... 43
■
Checking the Digital-Signal Strength ................................. 43
■
PC DISPLAY
Using Your TV as a Computer (PC) Display ...................... 44
■
Display Modes ...................................................................44
■
Setting up the TV with your PC ......................................... 45
■
Setting the Home Theater PC ........................................... 46
■
TIME SETTING
Setting the Clock.............................................................. . 47
■
FUNCTION DESCRIPTION
Selecting a Menu Language .............................................. 50
■
Setting the Blue Screen Mode ........................................... 51
■
Using the Game Mode ......................................................51
■
Viewing Closed Captions
■
(On-Screen Text Messages) - Analog ...............................
Viewing Closed Captions
■
(On-Screen Text Messages) - Digital ................................
Menu Transparency Level .................................................54
■
Using the Energy Saving Feature .....................................54
■
Setting the Function Help ..................................................55
■
Digital Noise Reduction ..................................................... 55
■
Using the V-Chip ............................................................... 56
■
Setting the Light Effect
■
(
LN40N81BD
Upgrading the Software ....................................................63
■
/
LN46N81BD
/
LN52N81BD
) ...........................63
WISELINK
WISELINK ......................................................................... 64
■
Using the WISELINK Function .......................................... 64
■
Using the WISELINK Menu ............................................... 65
■
Using the PHOTO (JPEG) List .......................................... 66
■
Using the MP3 List ............................................................ 73
■
Using the Setup Menu .......................................................75
■
ABOUT ANYNET
What is Anynet+? ................................................................... 77
■
Connecting Anynet+ Devices .................................................. 77
■
Setting Up Anynet+ ................................................................. 78
■
Scanning and Switching between Anynet+ Devices ............... 78
■
Recording ...............................................................................79
■
Listening through a Receiver (Home theater) .........................80
■
Check Points before Requesting Service ............................... 80
■
+
APPENDIX
Appendix ...........................................................................81
■
Troubleshooting ................................................................. 81
■
Installing the Stand ............................................................83
■
Disconnecting the Stand ...................................................83
■
Wall-Mount Adjustment (Sold separately) ......................... 84
■
Wall Mount Kit Specifications (VESA) ............................... 85
■
Using the Anti-Theft Kensington Lock ............................... 86
■
Specications .................................................................... 87
■
52
53
English - II
Symbol Press Important Note One-Touch
Button
General Information
List of Features
Adjustable picture settings that can be stored in the TV’s memory.
Automatic timer to turn the TV on and off.
A special sleep timer.
Excellent Digital Interface & Networking :
With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Set-Top Box needed.
Remote Control
The supplied remote can be used to operate the TV as well as most DVD players, Set-top boxes,
Cable Boxes and VCRs.
Excellent Picture Quality
- DNIe technology provides life-like clear images.
SRS TruSurround XT
- SRS TruSurround XT provides a virtual Dolby surround system.
Accessories
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
Remote Control & Batteries (AAA x 2) Power Cord Cleaning Cloth
Cover-Bottom Owner’s Instructions
The items color and shape may vary depending on the model.
English - 2
Warranty Card / Registration
Card / Safety Guide Manual
(Not available in all locations)
Viewing the Control Panel
1
1 2 3 4 6
5
2
3
4
567
5
7
Buttons on the Lower-Right Part of the Panel
The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu.
To use the more advanced features, you must use the remote control.
<LN40M81BD / LN46M81BD>
<LN40N81BD / LN46N81BD / LN52N81BD>
The product color and shape may vary depending on the model.
1
SOURCE
Toggles between all the available input sources
(TV, AV1, AV2, S-Video1, S-Video2, Component1,
Component2, PC, HDMI1, HDMI2, HDMI3).
In the on-screen menu, use this button as you would
use the ENTER button on the remote control.
2
MENU
Press to see an on-screen menu of your TV’s features.
3
+ VOL -
Press to increase or decrease the volume.
In the on-screen menu, use the + VOL - buttons as you
would use the ◄ and ► buttons on the remote control.
4 CH
Press to change channels.
In the on-screen menu, use the
would use the ▲ and ▼ butons on the remote control.
5
SPEAKERS
6
(POWER)
Press to turn the TV on and off.
7
POWER INDICATOR
Blinks and turns off when the power is on and
lights up in stand-by mode.
REMOTE CONTROL SENSOR
Aim the remote control towards this spot on the TV.
CH
buttons as you
English - 3
Viewing the Connection Panel
Rear Panel Jacks
Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players.
For more information on connecting equipment, see pages 6-11.
[Side Panel Jacks]
1
AUDIO OUT
Connects to the audio input jacks on your Amplifier/
Home theater.
2 DIGITAL AUDIO OUT (OPTICAL)
Connects to a Digital Audio component.
3 PC IN
Connects to the video and audio output jacks on
your PC.
4 HDMI IN 1,2,3 /DVI IN(HDMI1) (AUDIO R/L)
Connects to the HDMI jack of a device with an HDMI output.
Use the HDMI IN 1 terminal for a DVI connection to an
external device.
You should use the DVI to HDMI cable or DVI-HDMI
adapter (DVI to HDMI) for a video connection,and the
DVI IN ‘R-AUDIO-L’ terminal for audio.
- The HDMI IN 1 terminal does not support PC connection
- No sound connection is needed for an HDMI to HDMI
connection
- When using an HDMI/DVI cable connection, you must use
the HDMI IN 1 terminal.
5 ANT 1 IN/ANT 2 IN
Connects to an antenna or cable TV system.
6 EX LINK
Connector for Wall Mount Adjustment only.
(see page 80.)
7
COMPONENT IN 1,2
Connects Component video/audio.
8
AV IN 1 / AV IN 2
Video and audio inputs for external devices, such as a
camcorder or VCR.
S-VIDEO
Connects an S-Video signal from a camcorder or VCR.
9
POWER INPUT
Connects the supplied power cord
0
KENSINGTON LOCK
The Kensington lock (optional) is a device used to
physically fix the system when used in a public place.
If you want to use a locking device, contact the dealer
where you purchased the TV.
The place of the Kensington Lock may be different
depending on its model.
!
HEADPHONE
Connects a set of external headphones for private
listening.
@
WISELINK
Connect this to the jack on the optional wall mount
bracket. This will allow you to adjust the TV viewing
angle using your remote control.
English - 4
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly at the
TV. You can also use your remote control to operate your VCR, Cable box, DVD player, or Set-Top Box.
1
POWER
Turns the TV on and off.
2
NUMERIC BUTTONS
Press to change the channel.
3
–
Press to select additional channels(digital
and analog) being broadcast by the same
station. For example, to select channel
“54-3”, press “54”, then press “–” and “3”.
4
CH LIST
Used to display Channel Lists on the
screen.
5
ANTENNA
Press to select “AIR” or “CABLE”.
6
VCR/DVD Functions
- Rewind
- Stop
- Play/Pause
- Fast/Forward
7
VOL / VOL
Press to increase or decrease the
volume.
8 (
MUTE)
Press to temporarily cut off the sound.
9
MENU
Displays the main on-screen menu.
0
S.MODE
Press to select the sound mode.
!
RETURN
Returns to the previous menu.
@
P.MODE
Press to select the picture mode.
#
CAPTION
Controls the caption decoder.
$
FAV.CH
Press to switch to your favorite channels.
%
SLEEP
Press to select a preset time interval
for automatic Shut off.
^
SRS
Selects SRS TruSurround XT mode.
&
SET
Sets the remote to control your
TV, VCR, Cable, DVD, or Set-Top Box
*
TV, DVD, STB, CABLE, VCR
Press to operate your TV,DVD, STB,
CABLE (box), or VCR
(See pages 17-21)
(
When pressing this button, a number
of buttons on the remote control (e.g.
TV, DVD, STB, CABLE, VCR,
VOL and CH buttons) light up for a few
seconds and then turn off to save
power. This function is convenient for
using the remote at night or when dark.
This is a special remote control for the visually impaired, and has Braille
points on the Power, Channel, STOP, PLAY/PAUSE and Volume buttons.
The performance of the remote control may be affected by bright light.
)
SOURCE
Press to display all of the available
video sources.
a
PRE-CH
Tunes to the previous channel.
b
WISELINK
This function enables you to view and
play photo (JPEG) and audio files
(MP3) from an external device.
(Refer to page
c
REC
Records for Live Broadcasting.
CH
d
Press to change channels.
EXIT
e
Press to exit the menu.
f
UP▲ / DOWN▼ / LEFT◄
RIGHT►
Use to select on-screen menu items
and change menu values.
INFO
g
Press to display information on the TV
screen.
h
Anynet+
Runs the Anynet view functions and
sets up Anynet devices.
STILL
i
Press to stop the action during a
particular scene.
Press again to resume normal video.
j
P.SIZE
Picture size selection.
k
PIP
Picture-in Picture ON/OFF.
CH
l
Displays the available channels in
sequence. (These buttons change
channels in the PIP window only.)
MTS
m
Press to choose stereo, mono or
Separate Audio Program
(SAP broadcast).
n
RESET
When your remote does not work,
change the batteries and press the
RESET button for 2-3 seconds before
use.
/
/ CH
65)
/ ENTER
/
English - 5
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AAA size batteries.
Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a
long time.
The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries should last for about one year.)
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
Connections
Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like the diagram to the right, see "Antennas with
300 Ω Flat Twin Leads" below.
If your antenna has one lead that looks like the diagram to the right, see "Antennas with 75
Ω Round Leads".
If you have two antennas, see "Separate VHF and UHF Antennas".
Antennas with 300 Ω Flat Twin Leads
If you are using an off-air antenna (such as a roof antenna or "rabbit ears") that has 300 Ω twin at leads, follow the directions
below.
1. Place the wires from the twin leads under the screws on a 300-75 Ω adapter
(not supplied).
Use a screwdriver to tighten the screws.
2. Plug the adaptor into the ANT 2 IN (CABLE) terminal on the back of the TV.
ANT 2 IN
(CALBE)
Antennas with 75 Ω Round Leads
1. Plug the antenna lead into the ANT 1 IN (AIR) terminal on the back of the TV.
ANT 1 IN
(AIR)
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops).
1. Connect both antenna leads to the combiner.
UHF
VHF
2. Plug the combiner into the ANT 1 IN (AIR) terminal on the bottom of the rear panel.
English - 6
ANT 1 IN
(AIR)
UHF
VHF
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
1. Plug the incoming cable into the ANT 2 IN (CABLE) terminal on the back of the TV.
Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.
ANT 2 IN
(CABLE)
Connecting to a Cable Box that Descrambles All Channels
1. Find the cable that is connected to the ANT OUT terminal on your cable box.
This terminal might be labeled "ANT OUT", "VHF OUT" or simply, "OUT".
2. Connect the other end of this cable to the ANT 2 IN (CABLE) terminal on the back of the TV.
ANT IN
ANT OUT
ANT 2 IN
(CABLE)
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a twoway splitter, an RF (A/B) switch, and four lengths of RF cable. (These items are available at most electronics stores.)
1. Find and disconnect the cable that is
connected to the ANT IN terminal on your
cable box.
This terminal might be labeled "ANT IN",
"VHF IN" or simply, "IN".
2. Connect this cable to a two-way splitter.
ANT IN
Incoming
cable
Splitter
3. Connect an RF cable between the OUTPUT
terminal on the splitter and the IN terminal
on the cable box.
Incoming
cable
Splitter
Cable Box
4. Connect an RF cable between the
ANT OUT terminal on the cable box and
the B–IN terminal on the RF(A/B) switch.
Incoming
cable
Splitter
Cable Box
RF (A/B)
Switch
5. Connect another cable between the other
OUT terminal on the splitter and the A–IN
terminal on the RF (A/B) switch.
6. Connect the last RF cable between the
Incoming
cable
Splitter
Cable Box
RF (A/B)
Switch
ANT IN
OUT terminal on the RF (A/B) switch and
the ANT IN terminal on the rear of the TV.
Incoming
cable
Splitter
Cable Box
RF (A/B)
Switch
TV Rear
After you have made this connection, set the A/B switch to the "A" position for normal viewing. Set the A/B switch to the "B" position to
view scrambled channels. (When you set the A/B switch to "B", you will need to tune your TV to the cable box’s output channel, which is
usually channel 3 or 4.)
English - 7
Connecting a VCR
Video Connection
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the
instructions on pages 6-7). Skip step 1 if you have not yet connected to an antenna or a cable system.
1. Unplug the cable or antenna
from the back of the TV.
2. Connect the cable or antenna
to the ANT IN terminal on the
back of the VCR.
3. Connect an RF Cable between
the ANT OUT terminal on the
VCR and the ANT 1 IN (AIR) or
ANT 2 IN (CABLE) terminal on
the TV.
4. Connect a Video Cable
between the VIDEO OUT jack
on the VCR and the AV IN 1
(or AV IN 2) [VIDEO] jack on
the TV.
5. Connect Audio Cables
between the AUDIO OUT
jacks on the VCR and the
AV IN 1 (or AV IN 2)
[R-AUDIO-L] jacks on the TV.
If you have a “mono”
(non-stereo) VCR, use a
Y-connector (not supplied)
to hook up to the right
and left audio input jacks
of the TV. If your VCR
is stereo, you must
connect two cables.
VCR Rear Panel
Audio Cable (Not supplied)
5
2
Video Cable (Not supplied)
4
RF Cable (Not supplied)
3
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.
Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
ANT 1 IN
(AIR)
ANT 2 IN
(CABLE)
TV Rear Panel
S-Video Connection
Your Samsung TV can be connected to an S-Video signal from an VCR.
(This connection delivers a better picture as compared to a standard VCR.)
1. To begin, follow steps 1–3
in the previous section to
connect the antenna or
cable to your VCR and
your TV.
VCR Rear Panel
2. Connect an S-Video Cable
between the S-VIDEO OUT
jack on the VCR and the
AV IN1 [S-VIDEO] jack on
the TV.
3. Connect Audio Cables
between the AUDIO OUT
jacks on the VCR and the
AV IN1 [R-AUDIO-L] jacks
on the TV.
An S-Video cable may be included with a VCR. (If not, check your local electronics store.)
Audio Cable (Not supplied)
3
S-Video Cable (Not supplied)
2
RF Cable (Not supplied)
1
Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
English - 8
TV Rear Panel
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV.
They allow you to view the camcorder tapes without using a VCR
1. Connect a Video Cable
between the AV IN2
[VIDEO] jack on the
TV and the VIDEO OUT
jack on the camcorder.
2. Connect Audio Cables
between the AV IN2
[R-AUDIO-L] jacks on the
TV and the AUDIO OUT
jacks on the camcorder.
Camcorder
1
2
Each Camcorder has a different back panel configuration.
When connecting a Camcorder, match the color of the connection terminal to the cable.
TV Side Panel
Video Cable (Not supplied)
Audio Cable (Not supplied)
Connecting a DVD Player/Set-Top Box
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
1. Connect a Component
Cable between the
COMPONENT IN(1 or 2)
[Y, PB, PR] jacks on the TV
and the COMPONENT
[Y, PB, PR] jacks on the
DVD/Set-Top Box
2. Connect Audio Cables
between the COMPONENT
IN(1 or 2) [R-AUDIO-L]
jacks on the TV and the
AUDIO OUT jacks on the
DVD/Set-Top Box
DVD Player/Set-Top Box
Audio Cable (Not supplied)
2
Component Cable (Not supplied)
1
Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and
Pr (Red) for enhanced video quality.
Be sure to match the component video and audio connections.
For example, if connecting the video cable to COMPONENT IN, connect the audio cable
to COMPONENT IN also.
Each DVD Player/STB has a different back panel configuration.
When connecting a DVD player/STB, match the color of the connection terminal to the cable.
TV Rear Panel
English - 9
Connecting a DVD Player/Set-Top Box via HDMI
This connection can only be made if there is an HDMI Output connector on the external device.
1. Connect an HDMI Cable
DVD Player Rear Panel
between the HDMI IN
(1,2 or 3) connector on the
TV and the HDMI connector
on the DVD player/Set-Top
Box.
TV Rear Panel
Side Panel Jacks
HDMI Cable (Not supplied)
What is HDMI?
• HDMI(High-Definition Multimedia Interface), is an interface that
enables the transmission of digital audio and video signals using a single cable
• The difference between HDMI and DVI is that the HDMI device is smaller in size,
has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed
Each DVD player/STB has a different back panel configuration.
Connecting a DVD Player/Set-Top Box via DVI
This connection can only be made if there is a DVI Output connector on the external device.
1. Connect a DVI to HDMI
Cable or DVI-HDMI Adapter
between the HDMI IN 1
connector on the TV and
the DVI connector on the
DVD player/Set-Top Box.
DVD Player / Set-Top Box
or
TV Rear Panel
2. Connect Audio Cables
between the DVI IN (HDMI 1)
[R-AUDIO-L] jack on the
TV and the AUDIO OUT jacks
on the DVD player/
Set-Top Box.
Audio Cable (Not supplied)
2
DVI to HDMI Cable (Not supplied)
1
Each DVD player/STB has a different back panel configuration.
When connecting a DVD player/STB, match the color of the connection terminal to the cable.
When using an HDMI/DVI cable connection,you must use the HDMI IN1 terminal.
English - 10
Connecting a Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
1. Connect an Optical Cable
between the “DIGITAL
Digital Audio System
AUDIO OUT (OPTICAL)”
jacks on the TV and the
Digital Audio Input jacks on
the Digital Audio System.
When a Digital Audio
System is connected to the
“DIGITAL AUDIO OUT
(OPTICAL)” terminal:
Decrease the volume
Optical Cable (Not supplied)
of the TV, and adjust the
volume level with the
system’s volume control.
5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
Each Digital Audio System has a different back panel configuration.
Connecting an Amplier/DVD Home Theater
TV Rear Panel
1. Connect Audio Cables
between the AUDIO OUT
[R-AUDIO-L] on the TV
and AUDIO IN [R-AUDIO L] on the Amplifier/DVD
Home Theater.
When an audio amplifier is
connected to the "AUDIO
OUT [L-AUDIO-R]"
terminals: Decrease the
volume of the TV, and adjust
the volume level with the
Amplifier’s volume control.
Connecting a PC
1. Connect a D-Sub
Cable between PC IN
[PC] connector on
the TV and the PC
output connector on
your computer.
2. Connect a PC Audio
Cable between PC IN
[AUDIO] jack on the
TV and the Audio Out
jack of the sound card
on your computer.
TV Rear Panel
Amplier/DVD Home Theater
Audio Cable (Not supplied)
Each Amplifier/DVD Home Theater has a different back panel configuration.
When connecting an Amplifier/DVD Home Theater, match the color of the connection
terminal to the cable.
TV Rear Panel
PC
PC Audio Cable (Not supplied)
2
D-Sub Cable (Not supplied)
1
Each PC has a different back panel configuration.
When connecting a PC, match the color of the connection terminal to the cable.
When using an HDMI/DVI cable connection,you must use the HDMI IN1 terminal.
English - 11
Operation
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the button on the front of the panel.
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently:
1. Press the POWER button on the remote control.
The message “Menu language, Shop Mode, Channels and Time will be set.” is
displayed.
Press the ENTER
button, then “Select the language of the OSD” menu
is automatically displayed.
2. Press the ▲ or ▼ buttons to select language, then press the ENTER button.
The message “Select Home Mode when installing this TV at home.” is displayed.
3. Press the ◄ or ► buttons to select “Shop” or “Home”, then
press the ENTER button.
The message “Select the antennas to memorize.” is displayed.
We recommend setting the TV to Home mode for the best picture in your
home environment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop mode and you want to return to Dynamic
(Home) mode, press any Volume button and then hold down the MENU button
for five seconds on the side panel of the TV.
4. Press the ▲ or ▼ buttons to memorize the channels of the selected connection.
Press the ENTER button to select “Start”.
If the antenna is connected to ANT 1(AIR), select “Air” and if it is connected to
ANT 2 (CABLE), select “Cable”.
If both ANT 1 (AIR) and ANT 2 (CABLE) are connected, select the “Air + Cable”.
In Cable mode, you can select the correct signal source among STD, HRC,
and IRC by pressing the ▲ or ▼ button, then press the ENTER button.
Contact your local cable company to identify the type of cable system that
exists in your particular area.
5. The TV will begin memorizing all of the available channels.
After all the available channels are stored, the Auto program menu reappears.
Press the ENTER button when channel memorization is complete.
The message “Select the clock mode.” is displayed.
To stop the search before it has finished, press the ENTER button with stop
selected.
Menu language, Shop Mode,
Channels and Time will be set.
Start
Plug & Play
Select the language of the OSD.
Menu Language :
Move Enter Skip
Select Home Mode when installing this TV at home.
Shop
Move Enter Skip
Select the antennas to memorize.
Air
Cable
Air+Cable
Move Enter Skip
Auto Program in progress.
Enter Skip
Auto Program is complete.
16 Channels were memorized.
Air : 16, Cable : 0.
English
Español
Français
Plug & Play
Plug & Play
Start
Start
Start
Autoprogram
Plug & Play
Stop
Plug & Play
Autoprogram
Home
Air Channel 50
35%
6. Press the ENTER button.
Press the ▲ or ▼ buttons to select “Manual” or “Auto”, then Press the
ENTER button.
The message “Set to daylight savings time.” is displayed.
English - 12
OK
Enter Skip
Clock Set
Select the clock mode.
Clock Mode :
Move Enter Skip
Plug & Play
Manual
Auto
7. Press the ▲ or ▼ buttons to select “Off” or “On”, then the ENTER button.
The message “Select the time zone in which you live.” is displayed.
Plug & Play
Set the daylight savings time.
Daylight Savings Time :
On
Off
8. Press the ▲ or ▼ buttons to highlight the time zone for your local area
Press the ENTER button. If you have received a digital signal, the time will be set
automatically.
If not, see page 48 to set the clock.
9. The message “Enjoy your watching.” is displayed.
When you have finished, press the ENTER button.
If you want to reset this feature...
1. Press the MENU
button to display the menu.
Press the ▲ or ▼ buttons to select "Setup", then press the ENTER button.
2. Press the ENTER button again, to select "Plug & Play".
3. The message “Menu language, Shop Mode, Channels and Time will be set.”
is displayed.
Move Enter Exit
Select the time zone in which you live.
Newfoundland
Atlantic
Eastern
Central
Mountain
Pacific
Alaska
Hawaii
Move Enter Skip
TV
Plug & Play
Enjoy your watching.
OK
Plug & Play ►
Language : English ►
Time
Game Mode : Off ►
V-Chip ►
Caption ►
Menu TransParency : High ►
▼More
Move Enter Return
Menu language, Shop Mode,
Channels and Time will be set.
Setup
Start
►
Changing Channels
Using the Channel Buttons
1. Press the CH or
When you press the CH or
sequence.
You will see all the channels that the TV has memorized. (The TV must have
memorized at least three channels). You will not see channels that were either
erased or not memorized. See page 16 to memorize channels.
Using the PRE-CH Button to select the Previous Channel
1. Press the PRE-CH button.
The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one
channel, then use the number button to select the second channel. Then
use the PRE-CH button to quickly alternate between them.
CH
button to change channels.
CH
button, the TV changes channels in
English - 13
Adjusting the Volume
1. Press the
VOL or VOL buttons to decrease or increase the volume.
Using Mute
At any time, you can cut off the sound using the MUTE button.
1. Press MUTE button and the sound cuts off.
The word " " will appear in the lower-left corner of the screen.
2. To turn mute off, press the MUTE button again, or simply press the
VOL or VOL buttons.
Viewing the Display
The display identies the current channel and the status of certain audio-video settings.
1. Press the INFO button on the remote control.
The TV will display the channel, the type of sound,
and the status of certain picture and sound settings.
Air 7
Mono
Picture Mode : Dynamic
Sound Mode : Custom
MTS : Stereo
05 : 54 pm
Press the INFO button once more or wait approximately 10 seconds and the
display disappears automatically.
English - 14
Viewing the Menus
1. With the power on, press the MENU button.
The main menu appears on the screen. The menu’ s left side has five icons:
Picture, Sound, Channel, Setup, Input.
2. Use the ▲ or ▼ buttons to select one of the five icons.
TV
Source List : TV ►
Edit Name
WiSELINK
Anynet + (HDMI-CEC)
Input
Then press the ENTER button to access the icon’s sub-menu.
3. Press the EXIT button to exit.
Move Enter Exit
The on-screen menus disappear from the screen after about one minutes.
Memorizing the Channels
Your TV can memorize and store all of the available channels for both "off-air" (Air) and "Cable" channels. After the available
channels are memorized, use the CH or
channels by entering the channels digits. There are three steps for memorizing channels: selecting a broadcast source,
memorizing the channels (automatic) and adding and or deleting channels (Channel Lists ).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e. an Air or a Cable system).
1. Press the MENU button to display the menu.
Press the ▲ or ▼ buttons to select "Channel", then press the ENTER button.
2. Press the ENTER button select “Antenna”.
Press the ▲ or ▼ buttons to select “Air” or “Cable”, then press the ENTER button.
Press the EXIT
button to exit.
CH
buttons to scan through the channels. This eliminates the need to change
TV
Antenna : Air ►
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune ►
Signal Strength
LNA : On
Move Enter Return
TV
Antenna : Air
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA : On
Move Enter Return
Channel
Channel
Air
Cable
►
►
►
►
►
►
►
English - 15
Storing Channels in Memory (Automatic Method)
1. Press the MENU button to display the menu.
Press the ▲ or ▼ buttons to select “Channel”, then press the ENTER button.
2. Press the ▲ or ▼ buttons to select "Auto Program", then press the ENTER button.
3. Press the ▲ or ▼ buttons to select the antenna connection, then press the
ENTER button.
Air: “Air” antenna signal. / Cable: “Cable” antenna signal. /
Air+Cable: “Air” and “Cable” antenna signals.
4. When selecting The Cable TV system : Press the ENTER button to start the auto
program. By default, the cable TV system is set to “STD”. If you want to select
another type of cable system, press the ▲ or ▼ button to select
“STD”, “HRC” or “IRC”.
STD, HRC and IRC identify various types of cable TV systems. Contact your
local cable company to identify the type of cable system that exists in your
particular area. At this point the signal source has been selected.
Press the ENTER
button to start the auto program.
To stop the search before it has finished, press the ENTER button with stop
selected.
5. After all the available channels are stored, the “Auto Program” menu reappears.
Press the EXIT button to exit.
TV
Antenna : Air ►
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune ►
Signal Strength
LNA : On
TV
Select the antennas to memorize.
Air
Cable
Air+Cable
TV
Select the cable system.
Auto Program in Progress.
Enter Return
Auto Program is complete.
16 Channels were memorized.
Air : 16, Cable : 0.
Channel
Move Enter Return
Channel
Start
Start
Start
Move Enter Return
Move Enter Return
Auto Program
Analog
STD
HRC
IRC
Digital
STD
HRC
IRC
Move Enter Return
Move Enter Return
Auto Program
Plug & Play
Start
Cable Channel 50
Stop
►
►
►
►
►
►
50%
English - 16
OK
Enter Return
Setting Up Your Remote Control
After the television has been set up properly, your remote control can operate in five
different modes: TV, DVD, Cable, Set-Top Box, VCR. Pressing the corresponding button
on the remote control allows you to switch between these modes, and control
whichever piece of equipment you choose.
The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and
Set-Top Boxes.
Setting Up the Remote to Operate Your VCR
1. Turn off your VCR.
2. Press the
3. Press the
4. Using the number buttons on your remote control, enter three digits of the VCR code
listed on page 19 of this manual for your brand of VCR. Make sure you enter three digits
of the code, even if the first digit is a “0”.
(If more than one code is listed, try the first one.)
5. Press the POWER button on the remote control.
Your VCR should turn on if your remote is set up correctly.
If your VCR does not turn on after set up, repeat steps 2, 3, and 4, but try one of the
other codes listed for your brand of VCR.
If no other codes are listed, try each VCR code, 000 through 080.
Note on Using Remote Control Modes: VCR
When your remote control is in “VCR” mode, the volume buttons still control your
TV’s volume.
VCR button on your TV’s remote control.
SET button on your TV’s remote control.
Setting Up the Remote to Operate Your Cable Box
1. Turn off your cable box.
2. Press the CABLE
3. Press the
4. Using the number buttons on your remote control, enter three digits of the cable box code
listed on page 20 of this manual for your brand of cable box. Make sure you enter three
digits of the code, even if the first digit is a “0”. (If there is more than one code listed, try
the first one.)
5. Press the POWER button on the remote control.
Your cable box should turn on if your remote is set up correctly.
If your cable box does not turn on after set up, repeat steps 2, 3, and 4, but try one of the
other codes listed for your brand of cable box. If no other codes are listed, try each code,
000 through 046.
Note on Using Remote Control Modes: Cable Box
When your remote control is in “CABLE” mode, the volume buttons still control your
TV’s volume.
button on your TV’s remote control.
SET button on your TV’s remote control.
English - 17
Setting Up the Remote to Operate Your DVD
1. Turn off your DVD.
2. Press the
3. Press the
DVD button on your TV’s remote control.
SET button on your TV’s remote control.
4. Using the number buttons on your remote control, enter three digits of the DVD code
listed on page 20~21 of this manual for your brand of DVD.
Make sure you enter three digits of the code, even if the first digit is a “0”.
(If there is more than one code listed, try the first one.)
5. Press the POWER button on the remote control.
Your DVD should turn on if your remote is set up correctly.
If your DVD does not turn on after set up, repeat steps 2, 3, and 4, but try one of the
other codes listed for your brand of DVD.
If no other codes are list-ed, try each code, 000 through 141.
Note on Using Remote Control Modes: DVD
When your remote control is in “DVD” mode, the volume buttons still control your
TV’s volume.
Setting Up the Remote to Operate Your STB
1. Turn off your STB.
2. Press the STB
3. Press the
button on your TV’s remote control.
SET button on your TV’s remote control.
4. Using the number buttons on your remote control, enter three digits of the STB code
listed on page 21 of this manual for your brand of STB.
Make sure you enter three digits of the code, even if the first digit is a “0”.
(If there is more than one code listed, try the first one.)
5. Press the POWER button on the remote control.
Your STB should turn on if your remote is set up correctly.
If your STB does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other
codes listed for your brand of STB.
(If no other codes are listed, try each code, 000 through 074.)
Note on Using Remote Control Modes: STB
When your remote control is in “STB” mode, the volume buttons still control your
TV’s volume.
English - 18
Remote Control Codes
VCR
Brand Code
SAMSUNG 000 001 002 003 004 005 077 078 079
ADMIRAL 020
AIWA 025
AKAI 004 027 032
AUDIO DYNAMICS 007 026
BELL&HOWELL 018
BROKSONIC 022
CANDLE 002 003 006 008 015 055
CANON 021 056
CITIZEN 002 003 006 008 015 055
COLORTYME 007
CRAIG 002 024
CURTIS MATHES 002 007 008 017 021 025 056 064 066
DAEWOO 003 010 011 012 013 014 015 016
DB 007 026
DIMENSIA 017
DYNATECH 025
ELECTROHOME 034
EMERSON
FISHER 018 024 028 029 048 051 061
FUNAI 025
GENERAL ELECTRIC
GO VIDEO 002
HARMAN KARDON 007
HITACHI 019 025 041 042 074
INSTANT REPLAY 021
JC PENNEY
JCL
JVC
KENWOOD
KLH
KONIA
LG(Goldstar)
LIOYD
LOGIK
LXI
MAGNAVOX
MARANTZ
MARTA
MEI
MEMOREX
MGA
MIDLAND
MINOLTA
MITSUBISHI
001 003 006 021 022 025 030 032 034 040
047 050 052 060 063 065 066 067 069 073
002 005 017 021 056
002 007 018 019 021 026 037 041 054 056
007 008 018 021 026 037
081 082 083
007 008 018 021 026 037
070
036
006 007 008 009 010
025
038
025
021 056 059
007 008 018 021 026 037 062
006
021
006 021 024 025
034
005
019 041 075
019 034 041 046
Brand Code
MONTGOMERY WARD
MTC 002 025
MULTITECH 002 005 025 038
NEC 007 008 018 026 037 062 064
OPTIMUS 020
ORION 073 074 075 076
PANASONIC 021 056 071 072
PENTAX 019 041 075
PENTEX RESEARCH+
PHILCO 021 056 059
PHILIPS 021 080
PIONEER 019 026 039 053
PORTLAND 015 049 055
PROSCAN 017
QUARTZ 018
QUASAR 021 056
RADIO SHACK/
REALISTIC
RCA
SANSUI 026
SANYO 018 024
SCOTT 003 047 052 067
SEARS 006 018 019 024 028 029 041 048 051
SHARP 020 034 045 015
SHIMTOM 027 033 038 058
SIGNATURE 025
SONY 027 033 044
SYLVANIA 021 025 056 059
SYMPHONIC 025
TANDY 018 025
TASHIKA 006
TATUNG 037
TEAC 025 037 068
TECHNICS 021
TEKNIKA 006 021 025 031
TMK 066
TOSHIBA 003 019 029 051 052
TOTEVISION 002 006
UNITECH 002
VECTOR RESEARCH
VICTOR 026
VIDEO CONCEPTS 007 026
VIDEOSONIC 002
WARDS
YAMAHA 007 008 018 026 037
ZENITH 023 027 033
020
008
006 018 020 021 024 025 029 034 048 056
002 017 019 021 035 041 043 057 068 076
007 026
002 003 006 019 020 021 024 025 034 038 041
English - 19
CABLE BOX
Brand Code
SAMSUNG 000 001 002 003 004 005 006 007
GI 041
HAMLIN 003 024 031
HITACHI 025 030
JERROLD 038 039
MACOM 025 030
MAGNAVOX 019 023 028
OAK 026
PANASONIC 003 022 027 037 044
PHILIPS 019 021 023 028
PIONEER 004 018 020 044
RCA 014 022 040
REGAL 003
SAMSUNG DVD
Product Code
DVD 000 001 002
DVDR 003 004
BD Record 005 006
VCR COMBO 007 008 009 010 011
VCR Record 012
DHR COMBO 013
DVD
Brand Code
ANAM 030
AUDIOVOX 075
AUDIOLOGIC 085
ANABA 072
APEX DIGITAL 070 071 074 086 083 084 088 111 112
AIWA 114
BROKSONIC 062
BLAUPUNKT 074
B&K 122 123
CURTIS MATHES 027
CYBER HOME 077 078 079 082
CLARION 080 125
CIRRUS 081
CYBER HOME 065
CINEVISION 095
DAEWOO 066
DENON 146
FARENHEIT 067 068
FISHER 090
GPX 060
GO VIDEO 061 089 133 135
GE 069 074
GREENHILL 074
HITACHI 064 113
HITEKER 071
HOYO 073
HARMAN / KARDON
IRT 089
091 110
Brand Code
REGENCY 015 023
SA 042 043
SCIENTIFIC ATLAN 042 043
SPRUCER 022
STARGATE 2000 036
SYLVANIA 016
TEXSCAN 016
TOCOM 032
UNIVERSAL 033 034
VIEWSTAR 019 021 023 028
WARNER AMEX 046
ZENITH 017 029 035 037 045
Product Code
Home Theater VCR COMBO 014 015 016
HDD Recorder COMBO 017
TWIN TRAY COMBO 018
STB DVD COMBO 019
DVD Receiver 020
AV Receiver 021
Brand Code
INTEGRA 092
JBL 091
JVC 022 033 115 116
JATON 073
KENWOOD 051 108 109
KISS 073
KONKA 059 100 106 107
KLH 074 075
LG(Goldstar) 025 031
LOEWE 057
LASONIC 058
MOBILE AUTHORITY
MEMOREX 055
MALATA 056
MAGNAVOX 076 093
MINTEK 074 094
MONYKA 073
NORCENT 048 049 050
NEXT BASE 052
NEC 053
NANTAUS 144
NESA 074
OPTOMEDIA ELECTRONICS
OPTIVIEW 072
ONKYO 076 092 119
PHILCO 044 045
PRINCETON 046 047
PROSCAN 023
054
105
English - 20
DVD
Brand Code
PANASONIC 024 034 124 134 136 137 138
PHILIPS 036 076
ROTEL 117 118
RIO 120
RCA 023 035 074 075 131 132
RAITE 073
ROWA 038
SAMPO 104
SONY 026 029 126 127 128 129 130 141
SHERWOOD 039 041
SVA 042
SYLVANIA 043 093
SHARP 140
SANSUI 062
SANYO 062 090
SHINSONIC 094
SAMSUNG SET-TOP BOX
Product Code
Ground wave STB 001 002
Satellite STB 003
CABLE STB 004
STB DVD COMBO 008
Satellite STB HDD COMBO Standard 009
SET-TOP BOX
Brand Code
ALPHASTAR 023
ANAM 043
CHANNEL MASTER 018 034
CROSSDIGITAL 019
CHAPARRAL 035
DIRECT TV 015 016 017 019 022 045 060 061 062
DAEWOO 074
DISH NETWORK SYSTEM
DISHPRO 069
DRAKE 018 024 032
DX ANTENNA 027
ECHOSTAR 025 069 070 071
EXPRESSVU 069
GOI 069
GE 065
GENERAL INSTRUMENT
HTS 069
HOME CABLE 056
HITACHI 022
HUGHES NETWORK
IQ 020
IQ PRISM 020
JANEIL 059
JERROID 063
JVC 069 070
LG(Goldstar) 044 073
065 066 067 068
069 070
046 047 048 063 064
015 017
Brand Code
THOMSON 145
TOSHIBA 028 062 076
TECHNICS 139
TVIEW 072
TOKAI 073
TEAC 096
TECHWOOD 097
TREDEX 098 099 101
URBAN CONCEPTS
VENTURER 075
VOCOPRO 102
YAMAHA 032 063
YAMAKAWA 040 073
XWAVE 103
ZENITH 076 121
Product Code
Satellite STB HDD COMBO Premium 010
CABLE STB HDD COMBO Standard 011
CABLE STB HDD COMBO Premium 012
Ground wave STB HDD COMBO Standard 013
Ground wave STB HDD COMBO Premium 014
Brand Code
MAGNAVOX 016 021 036 038 039 040 041 042
MEMOREX 016
MOTOROLA 064
MACOM 018
MITSUBISHI 015
NEXT LEVEL 047 048 064
PHILIPS 015 016 017 021 033 036 038 039 040
PRIMESTAR 046 049 050 063
PANASONIC 058 059 061 062
PAYSAT 016
PROSCAN 065 066
RCA 051 052 053 065 066
RADIOSHACK 064
REALISTIC 057
STAR TRAK 026
STS 020 027
SKY 031
SKY LIFE 005 006 007
SHACK 064
STAR CHOICE 064
SONY 054 060
TOSHIBA 015 017 028 029 030 072
ULTIMATE TV 060 066
UNIDEN 016 021 037 055 056 057
ZENITH 024 031 068
076
041 042 067
English - 21
To Select the Source
Use to select TV or other external input sources connected to the TV.
Use to select the input source of your choice.
1. Press the MENU button to display the menu.
Press the▲ or ▼ buttons to select “Input”, then press the ENTER button.
2. Press the ENTER button to select "Source List".
Press the ▲ or ▼ buttons to select signal source, then press the ENTER button.
When you connect equipment to the LCD, you can choose between the
following sets of jacks: TV, AV1, AV2, S-Video1, S-Video2, Component1,
Component2, PC, HDMI1, HDMI2, HDMI3 on the TV’s rear panel.
HDMI1, HDMI2, HDMI3 input can only be selected when the external device is
turned on and connected via HDMI.
AV2/S-Video2/HDMI3 is placed on the side of the TV.
You can choose only those external devices that are connected to the TV.
Press the SOURCE button on the remote control to view an external signal source.
To Edit the Input Source Name
Name the device connected to the input jacks to make your input source selection easier.
1. Press the MENU button to display the menu.
Press the▲ or ▼ buttons to select “Input”, then press the ENTER button.
Press the ▲ or ▼ buttons to select "Edit Name", then press the ENTER button.
TV
Source List : TV ►
Edit Name
WISELINK
Anynet+ (HDMI-CEC)
Move Enter Return
TV
AV1 : ---AV2 : ---S-Video1 : ---S-Video2 : ---Component1 : ---Component2 : ----
▼More
Move Enter Return
TV
Source List : TV ►
Edit Name
WISELINK
Anynet+ (HDMI-CEC)
Input
►
Source ListTV
Input
►
2. Press the ▲ or ▼ buttons to select "AV1", "AV2", "S-Video1", "S-Video2",
"Component1", "Component2", "PC", "HDMI1", "HDMI2", "HDMI3" input jack, then
press the ENTER button.
3. Press the ▲ or ▼ buttons to select "VCR", "DVD", "D-VHS", "Cable STB",
"HD STB", "Satellite STB", "PVR STB", "AV Receiver", "DVD Receiver",
"Game", "Camcorder", "DVD Combo", "PC", "VOD STB", "TV" input source, then
press the ENTER button.
Press the EXIT button to exit.
English - 22
Move Enter Return
Edit NameTV
Edit NameTV
: ----
: ----
----
VCR
DVD
D-VHS
Cable STB
HD STB
Satellite STB
PVR STB
▼
AV1
AV2 : ---S-Video1 : ---S-Video2 : ---Component1 : ----
Component2 : ---▼More
Move Enter Return
AV1
AV2 : ----
S-Video1 : ----
S-Video2 : ----
Component1 : ----
Component2 : ----
▼More
Move Enter Return
Picture Control
Using Automatic Picture Settings
Your TV has Three automatic picture settings ("Dynamic", "Standard", "Movie") that are preset at the factory.
You can activate either Dynamic, Standard, Movie by making a selection from the menu.
1. Press the MENU button to display the menu.
Press the ENTER button, to select “Picture”.
2. Press the ENTER button to select "Mode".
Press the ▲ or ▼ buttons to select the "Dynamic", "Standard", "Movie" picture
setting. Press the ENTER button.
Choose Dynamic to increase the clarity and sharpness of the picture.
Choose Standard for the standard factory settings.
Choose Movie for a natural Image without picture enhancements.
3. Press the ▲ or ▼ buttons to select "Contrast", "Brightness", "Sharpness",
"Color", or "Tint(G/R)", then press the ENTER button.
4. Press the ◄ or ► buttons to decrease or increase the value of a particular item.
For example, if you select "Contrast", pressing the ► button increases it.
Press the ENTER button.
Press the EXIT
button to exit.
• When you make changes to Contrast, Brightness, Sharpness, Color, Tint(G/R)
OSD will be also adjusted accordingly.
• When in PC mode, Tint, Sharpness, and Color are not available.
Mode : Dynamic
Contrast 100
Brightness 50
Sharpness 85
Color 55
Tint G 50 R 50
Balck light 100
▼More
Mode : Dynamic
Contrast 100
Brightness 50
Sharpness 85
Color 55
Tint G 50 R 50
Balck light 10
▼More
Mode : Dynamic
Contrast 100
Brightness 50
Sharpness 85
Color 55
Tint G 50 R 50
Balck light 10
▼More
PictureTV
Move Enter Return
PictureTV
Dynamic
Standard
Movie
Move Enter Return
PictureTV
Move Enter Return
►
►
Press the P.MODE button on the remote control repeatedly to select the desired
picture mode.
English - 23
▲
Contrast
▼
Move Adjust Return
50
Activating Backlight
You can adjust the screen brightness by adjusting the LCD backlight brightness. (0~10)
1. Press the MENU button to display the menu.
Press the ENTER button to select “Picture”.
2. Press the ▲ or ▼ button to select “Backlight”, then press the ENTER button.
3. Press the ◄ or ► button to decrease or increase the valueof the backlight
brightness.
Press the ENTER button.
Press the EXIT
button to exit.
Adjusting the Color Tone
You can change the color of the entire screen according to your preference.
1. Press the MENU button to display the menu.
Press the ENTER button to select “Picture”.
2. Press the ▲ or ▼ button to select "Color Tone", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Cool2", "Cool1", "Normal", "Warm1",
or "Warm2".
Press the ENTER button.
When the picture mode is set to Dynamic or Standard, Warm1 and Warm2
cannot be selected. Movie mode is only available.
Mode : Dynamic
Contrast 100
Brightness 50
Sharpness 85
Color 55
Tint G 50 R 50
Balcklight 10
▼More
Move Enter Return
▲
Balcklight
▼
Move Adjust Return
▲More
Color Tone : Cool2
Detailed settings ►
Size : 16 : 9
Digital NR : Low
Active Color : On
DNle
Reset : OK ►
Move Enter Return
▲More
Color Tone : Cool2
Detailed settings
Size : 16 : 9
Digital NR : Low
Active Color : On
DNle
Reset : OK
Move Enter Return
PictureTV
5
PictureTV
: On ►
PictureTV
Cool2
Cool1
Normal
Warm1
Warm2
: On
►
►
►
►
►
Resetting the Picture Settings to the Factory Defaults
1. Press the ▲ or ▼ button to select "Reset", then press the ENTER button.
Press the ▲ or ▼ button to select “Cancel” or “OK” then press the ENTER button.
Press the EXIT
button to exit.
Each mode can be reset.
English - 24
▲More
Color Tone : Cool2
Detailed settings
Size : 16 : 9
Digital NR : Low
Active Color : On
DNle
Reset : OK
PictureTV
: Off
OK
Move Enter Return
Cancel
Adjusting the Detailed Settings
You can set detailed picture settings.
Activating Detailed Settings
1. Press the MENU button to display the menu.
Press the ENTER button to select “Picture”.
2. Press the ENTER button to select “Mode”
Press the ▲ or ▼ button to select “Movie”, then press the ENTER button.
3. Press the ▲ or ▼ button to select “Detailed settings”, then press the
ENTER button.
Detailed Settings is available in Standard or Movie mode.
If DNIe is Off, the Detailed Settings cannot be selected when the Picture mode
is in Standard mode.
Activating Black adjust
You can directly select the black level on the screen to adjust the screen depth.
4. Press the ▲ or ▼ button to select “Black adjust”, then press the ENTER button.
5. Press the ▲ or ▼ button to select “Off”,“Low”,“Medium”,“High”.
Press the ENTER button.
Off: Turns off the black adjustment function.
Low: Sets the black color depth to low.
Medium: Sets the black color depth to medium.
High: Sets the black color depth to high.
Mode : Movie
Contrast 100
Brightness 50
Sharpness 85
Color 55
Tint G 50 R 50
Balcklight 10
▼More
Move Enter Return
PictureTV
PictureTV
▲More
Color Tone : Cool2
Detailed settings
Size : 16 : 9
Digital NR : Low
Active Color : On
DNle : On
Reset : OK ►
Move Enter Return
►
►
►
►
►
►
Detailed SettingsTV
Black Adjust : Off
Dynamic Contrast : Off
Gamma : 0
Color Space : Auto ►
White Balance
My Color Control
Edge Enhancement : Off
XV
YCC : Off ►
Move Enter Return
►
►
►
►
►
►
Detailed SettingsTV
Black Adjust : Off
Dynamic Contrast : Off
Gamma
Color Space : Auto
White Balance
My Color Control
Edge Enhancement : Off
XV
YCC : Off
Move Enter Return
: 0
Off
Low
Medium
High
►
Activating Dynamic Contrast
You can adjust the screen contrast so that the optimal contrast is provided.
6. Press the ▲ or ▼ button to select “Dynamic Contrast”, then press the
ENTER button.
7. Press the ▲ or ▼ button to select “Off”,“Low”,“Medium”,“High”.
Press the ENTER button.
Off: Turns off the dynamic contrast adjustment function.
Low: Sets the dynamic contrast to low.
Medium: Sets the dynamic contrast to medium.
High: Sets the dynamic contrast to high.
English - 25
Detailed SettingsTV
Black Adjust : Off
Dynamic Contrast : Off
Gamma : 0
Color Space : Auto ►
White Balance
My Color Control
Edge Enhancement : Off
XV
YCC : Off ►
Move Enter Return
Detailed SettingsTV
Black Adjust : Off
Dynamic Contrast : Off
Gamma : 0
Color Space : Auto
White Balance
My Color Control
Edge Enhancement : Off
XV
YCC : Off
Move Enter Return
Off
Low
Medium
High
►
►
►
►
►
►
Activating Gamma
You can adjust the middle brightness of pictures. (-3 ~ 3)
8. Press the ▲ or ▼ button to select “Gamma”, then press the ENTER button.
9. Press the ◄ or ► button to decrease or increase the value of a particular item.
Press the ENTER button.
Detailed SettingsTV
Black Adjust : Off
Dynamic Contrast : Off
Gamma : 0
Color Space : Auto ►
White Balance
My Color Control
Edge Enhancement : Off
XV
YCC : Off
Move Enter Return
►
►
►
►
►
►
Changing the Color Space
Color space is a color matrix composed of red, green, and blue colors.
Select your favorite color space to experience the most natural color.
10. Press the ▲ or ▼ button to select “Color Space”, then press the ENTER button.
11. Press the ▲ or ▼ button to select “Auto” or “Wide”.
Press the ENTER button.
Wide : Wide Color Space offers deep and rich color tone.
Auto : Auto Color Space automatically adjusts to the most natural color tone based on
program sources.
Activating White Balance
You can adjust the color temperature for more natural picture colors.
12. Press the ▲ or ▼ button to select “White Balance”, then press the ENTER
button.
13. Select the required option by pressing the ▲ or ▼ button, then press the
ENTER button.
14. Press the ◄ or ► button to decrease or increase the value of a particular item.
Press the ENTER button.
R offset: Adjusts the red color darkness.
G offset: Adjusts the green color darkness.
B offset: Adjusts the blue color darkness.
R gain: Adjusts the red color brightness.
G gain: Adjusts the green color brightness.
B gain: Adjusts the blue color brightness.
Reset: The previously adjusted white balance will be reset to the factory defaults.
Changing the adjustment value will refresh the adjusted screen.
Gamma
Adjust Return
Detailed SettingsTV
Black Adjust : Off
Dynamic Contrast : Off
Gamma : 0
Color Space : Auto ►
White Balance
My Color Control
Edge Enhancement : Off
XV
YCC : Off ►
Move Enter Return
Detailed SettingsTV
Black Adjust : Off
Dynamic Contrast : Off
Gamma : 0
Color Space : Auto
White Balance
My Color Control
Edge Enhancement : Off
XV
YCC : Off
Move Enter Return
Detailed SettingsTV
Black Adjust : Off
Dynamic Contrast : Off
Gamma : 0
Color Space : Auto ►
White Balance
My Color Control
Edge Enhancement : Off
XV
YCC : Off ►
Move Enter Return
White BalanceTV
R offset
G offset
B offset
R gain
G gain
B gain
Reset
Move Enter Return
▲
R-Offset
▼
Move Adjust Return
Auto
Wide
0
►
►
►
►
►
►
►
►
►
►
►
►
15
15
15
15
15
15
15
English - 26
Activating My Color Control
This setting can be adjusted to suit your personal preferences. When using the My Color
Control Feature, the current picture remains in movement.
15. Press the ENTER button to select “My Color Control”.
16. Press the ▲ or ▼ button to select “Pink”,“Green”,“Blue”,“White”,“Reset”.
Press the ENTER button.
17. Press the ◄ or ► button to decrease or increase the value of a particular item.
Press the ENTER button.
Pink: Darkens or lightens the pink color
Green: Darkens or lightens the green color
Blue: Darkens or lightens the blue color
White: Darkens or lightens the white color
Reset: The previously adjusted colors will be reset to the factory defaults.
Changing the adjustment value will refresh the adjusted screen.
Detailed SettingsTV
Black Adjust : Off
Dynamic Contrast : Off
Gamma : 0
Color Space : Auto ►
White Balance
My Color Control
Edge Enhancement : Off
XV
YCC : Off ►
Move Enter Return
My Color ControlTV
Pink
Green
Blue
White
Reset
Move Enter Return
▲
Pink
▼
Move Adjust Return
►
►
►
►
►
►
15
15
15
15
15
Activating Edge Enhancement
You can emphasize object boundaries in the picture.
18. Press the ▲ or ▼ button to select “Edge Enhancement”, then press the
ENTER button.
19. Press the ▲ or ▼ button to select “Off” or “On”.
Press the ENTER button.
Activating XVYCC
The traditional TVs couldn’t clearly implement sharp, solid, and texture images.This TV
can implement those effects using the xvYCC signals, which support extended color
space. The traditional TVs couldn’t also implement part of colors for movie contents.
This TV can implement the same colors as in the films using the xvYCC signals.
Accordingly you can enjoy powerful color presentation of movies with your TV.
20. Press the ▲ or ▼ button to select “
XVYCC
”, then press the ENTER button.
21. Press the ▲ or ▼ button to select “Off” or “On”.
Press the ENTER button.
Press the EXIT
button to exit.
Only available in HDMI and Component on MOVIE option.
If xvYCC function is active, PIP cannot be selected.
Detailed SettingsTV
Black adjust : Off ►
Dynamic Contrast : Off
Gamma : 0
Color Space : Auto ►
White Balance
My Color Control
Edge Enhancement : Off
XV
YCC : Off ►
Move Enter Return
Detailed SettingsTV
Black adjust : Off
Dynamic Contrast : Off
Gamma
Color Space : Auto
White Balance
My Color Control
Edge Enhancement : Off
XV
YCC : Off ►
Move Enter Return
: 0
Off
On
Detailed SettingsTV
Black Adjust : Off ►
Dynamic Contrast : Off
Gamma : 0
Color Space : Auto ►
White Balance
My Color Control
Edge Enhancement : Off
XV
YCC : Off ►
Move Enter Return
Detailed SettingsTV
Black Adjust : Off
Dynamic Contrast : Off
Gamma
Color Space : Auto
White Balance
My Color Control
Edge Enhancement : Off
XV
YCC : Off ►
Move Enter Return
: 0
Off
On
►
►
►
►
►
►
►
►
►
►
English - 27
Changing the Screen Size
Screen size selection depends on the type of video input.
1. Press the MENU button to display the menu.
Press the ENTER button, to select “Picture”.
2. Press the ▲ or ▼ buttons to select "Size", then press the ENTER button.
3. Press the ▲ or ▼ buttons to select the screen format you want.
Press the ENTER button.
Press the EXIT
• 16:9 : Sets the picture to 16:9 wide mode.
• Zoom1 : Magnifies the size of the picture on the screen.
• Zoom2 :Magnifies the size of the picture more than “Zoom1”.
• Wide Fit : Enlarges the aspect ratio of the picture to fit the entire screen.
• 4:3 : Sets the picture to 4:3 normal mode.
• Just Scan : Use the function to see the full image without any cutoff
Alternately, you can press the P.SIZE button on the remote control repeatedly to
change the picture size.
If you watch a still image or the 4:3 mode for a long time (over 2 hours), an image
may be burned onto the screen. View the TV in 16:9 mode as much as possible.
HD (High Definition)
16:9 - 1080i/1080p (1920x1080), 720P (1280x720)
button to exit.
when HDMI 720p/1080i/1080p signals are input.
▲More
Color Tone : Cool2
Detailed settings
Size : 16 : 9
Digital NR : Low
Active Color : On
DNle
Reset
16 : 9
Zoom1
Zoom2
Wide Fit
4 : 3
Just Scan
PictureTV
: On ►
: OK ►
Move Enter Return
SizeTV
Move Enter Return
►
►
►
►
►
►
►
►
16:9
Sets the picture to 16:9 wide mode.
Zoom1
The screen size when Wide screen
is vertically enlarged.
Zoom2
The screen size when the
Zoom1 screen is vertically
enlarged.
Wide Fit
Enlarges the aspect ratio of the
picture to t the entire screen.
4:3
Sets the picture to 4:3
normal mode.
Just Scan
Use the function to see the full image
without any cutoff when HDMI
(
720p/1080i/1080p) or DTV (1080i)
signals are input.
In TV, VIDEO, S-VIDEO, and all COMPONENT (480i, 480p) modes, all screen modes can be selected.
(16:9 • Zoom1 • Zoom2 • 4:3).
• You can select only the 16:9, 4:3 and Wide Fit screen sizes in the Component (720p, 1080i).
• You can select only the 16:9, 4:3 and Wide Fit and Just scan screen sizes in the DTV or HDMI (720p,1080i,1080p) mode.
• In PC modes, only 16:9 & 4:3 modes can be selected.
• You must select Zoom with P. Size button on the remote if you want to move the Zoom 1or 2 picture up or down.
• When watching a DTV’s HD signal, you can use Wide Fit. Horizontal zoom (Wide Fit) sets the optical picture format by
expanding it both horizontally and vertically. For example, you can reset the picture in 4:3 format to 16:9. Wide Fit does not
support all external devices (DVD, VCR etc.).
English - 28
Loading...