Samsung LN40C630K1M User Manual

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Contate a SAMSUNG EM TODO O MUNDO

Caso tenha dúvidas ou comentários sobre os produtos da Samsung, entre em contato com o centro de atendimento ao cliente da SAMSUNG.

LCD TV user manual

Country

ARGENTINE 0800-333-3733 www.samsung.com

BRAZIL

CHILE 800-SAMSUNG(726-7864) www.samsung.com

COLOMBIA 01-8000112112 www.samsung.com

COSTA RICA 0-800-507-7267 www.samsung.com

ECUADOR 1-800-10-7267 www.samsung.com

EL SALVADOR 800-6225 www.samsung.com

GUATEMALA 1-800-299-0013 www.samsung.com

HONDURAS 800-7919267 www.samsung.com

JAMAICA 1-800-234-7267 www.samsung.com

MEXICO 01-800-SAMSUNG(726-7864) www.samsung.com

NICARAGUA 00-1800-5077267 www.samsung.com

PANAMA 800-7267 www.samsung.com

PUERTO RICO 1-800-682-3180 www.samsung.com

REP. DOMINICA 1-800-751-2676 www.samsung.com

TRINIDAD & TOBAGO 1-800-SAMSUNG(726-7864) www.samsung.com

VENEZUELA 0-800-100-5303 www.samsung.com

Customer Care Center 

0800-124-421 4004-0000

www.samsung.com

Web Site

LCD TV

user manual

BN68-02699C-01

imagine the possibilities

Thank you for purchasing this Samsung product.To receive more complete service, please register your product at

www.samsung.com/register

Model Serial No.

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and speciﬁcations may be changed without notice.

Important Warranty Information Regarding Television Format Viewing

See the warranty card for more information on warranty terms.

✎

Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format fullmotion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to ﬁll the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of LCD Displays that leave subtle, but permanent burned-in ghost images in the LCD picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LCD models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format selection and use, as well as burned-in images, are not covered by your Samsung limited warranty.

Still image warning

Avoid displaying still images (such as jpeg picture ﬁles) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock or news bars at screen bottom etc.) on the screen. Constant displaying of still pictures can cause ghosting of LCD screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations:

Avoid displaying the same TV channel for long periods.• Always try to display any image on full screen, use TV set picture format menu for best possible match.• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout •

process. Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.•

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in ﬁre or a problem with the product due to an increase in the internal temperature of the product.

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

✎

If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.

The appearance may differ depending on the product.

✎

Installation with a stand. Installation with a wall-mount.

4inches

English

4inches

Contents

English

ENGLISH

POWER

CH LIST

P . MODE

P . SIZE

INFO

TOOLS

Getting Started

List of Features y ......................................................... 4

Accessories y .............................................................. 4

Viewing the Control Panel y ......................................... 4

Viewing the Remote Control y ...................................... 5

Connecting to an Antenna y ........................................6

Plug & Play (Initial Setup) y ........................................... 6

Connections

Connecting to an AV Device y ......................................7

Connecting to an Audio Device y ................................. 8

Connecting to a PC y ..................................................8

Changing the Input source y ...................................... 10

Basic Features

How to Navigate Menus y .......................................... 10

Using the INFO button (Now & Next guide) y .............11

Planning your viewing y ............................................. 11

Channel Menu y ........................................................ 12

Seeing Channels 12 Using Favorite Channels 12 Memorizing channels 12 Editing channels 13 Other Features 13

Picture Menu y .......................................................... 14

Changing the Preset Picture Mode 14 Adjusting picture settings 14 Economical Solutions 14 Changing the Picture Options 15 Picture Options 16 Setting up the TV with your PC 17

Sound Menu y ........................................................... 17

Changing the Preset Sound Mode 17 Adjusting sound settings 18 Sound Settings 18

Setup Menu y ............................................................ 19

Setting the Time 19 Using the Sleep Timer 19 Setting the On / Off Timer 19 Locking Programs 20 Other Features 20 Picture In Picture (PIP) 21

Support Menu y ......................................................... 21

Advanced Features

Network Connection y ............................................... 23

Connecting to a Wired Network 23 Connecting Wireless Network 25

Media Play y .............................................................. 29

Connecting a USB Device 29 Connecting to the PC through network 29 Screen Display 31 Playing Multiple Files 34 Media Play - Additional Functions 34

Anynet y

.................................................................. 36

Setting Up Anynet+ 37 Switching between Anynet Recording 37 Listening through a Receiver 38 Troubleshooting for Anynet+ 38

AllShare y ..................................................................39

About AllShare 39 Setting Up AllShare 39

Devices 37

Other Information

Installing the Wall Mount y ......................................... 41

Assembling the Cables y ........................................... 42

Anti-theft Kensington Lock y ...................................... 42

Securing the TV to the Wall y ..................................... 42

Troubleshooting y ......................................................43

Speciﬁcations y ......................................................... 46

License 46

Index y ...................................................................... 47

Check the Symbol!

This function can be used by pressing the

TOOLS button on the remote control.

✎

Note :

Important information

Step by step guide :

Informs you how to access

the menu.

Getting Started

(Power)

Turns the TV on or off.

Remote control sensor

Aim the remote control towards this spot on the TV.

List of Features

Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed y without a cable box / STB (Set-Top-Box) satellite receiver.

Media Play y : Allows you to play music ﬁ les, pictures, and movies saved on a USB device. (P. 29) AllShare y : Allows you to conﬁ gure a mobile message server media render. (P. 39) Self Diagnosis y : You can check picture and sound operation. (P. 21)

Accessories

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

✎

The items' colors and shapes may vary depending on the models.

✎

Remote Control & Batteries (AAA x 2) y Owner’s Instructions y Warranty Card / Safety Guide (Not available in some locations) y

Blanking Bracket y Cable Tie y

(Not available in some locations)

Viewing the Control Panel

The product color and shape may vary depending on the model.

✎

Remote control sensor Power Indicator

Speakers

Cleaning Cloth y Power Cord y

(Power)

Remote control sensor Aim the remote control towards this spot on the TV.

SOURCE

MENU Displays an on-screen menu, the OSD (on screen display), of your TV’s features.

Power Indicator Blinks and turns off when the power is on and lights up in standby mode.

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

English

Turns the TV on or off.

Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTER

Adjusts the volume. In the OSD, use the ◄ and ► buttons on the remote control.

Changes the channels. In the OSD, use the ▼ and ▲ buttons on the remote control.

button on the remote control.

buttons as you would use the

01 Getting Started

English

Viewing the Remote Control

PRE-CH

TOOLS

GUIDE

INFO

RETURN

CH LIST

EXIT

MEDIA.P

FA V. CH

P . MODE

P . SIZE CC

S.MODE MTS

This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel and

✎

Volume buttons.

Turn the TV on and off.

Press to directly access to channels.

Press to select additional channels

(digital) being broadcast by the same

station. For example, to select channel

‘54.3’, press ‘54’, then press ‘-’ and ‘3’.

Adjust the volume.

Displays the channel List on the

Quickly select frequently used functions.

Selects the on-screen menu items and changes the values seen on the menu.

Returns to the previous menu.

Use these buttons in Media Play and

(: Controls recording on Samsung

recorders with the Anynet

screen.(P. 12)

Views Media Play.

Anynet

(P. 29)

modes.

feature)

Displays and selects the available video sources. (P. 10)

Selects the TV mode directly

Returns to the previous channel.

Cuts off the sound temporarily.

Changes channels.

Display the main on-screen menu.

Display the EPG (Electronic Program Guide). (P. 11)

Press to display information on the TV screen. (P. 11)

Exits the menu.

Buttons used in the Channel List,

Media Play menu, etc.

P.MODE: Select picture mode. (P. 14) S.MODE: Select the sound mode. (P. 17) MTS: Press to choose stereo, mono

or Separate Audio Program (SAP broadcast). (P. 18)

FAV.CH: Display Favorite Channel List

on the screen. (P. 12)

P.SIZE: Choose the picture size. (P. 16) CC: Controls the caption decoder. (P. 20)

Installing batteries (Battery size: AAA)

✎

NOTE

Use the remote control within 23 feet from the TV.

Bright light may affect the performance of the remote

control. Avoid use when nearby fluorescent lights or neon signs.

The color and shape may vary depending on the model.

Getting Started

POWER

CH LIST

INFO

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.

✎

Connecting the power cord and antenna.

VHF/UHF Antenna

Cable

Power Input

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in conﬁ guring basic settings. Press the

POWERP button. Plug & Play is available only when the Input source is set to TV.

✎

To return to the previous step, press the red button.

Selecting a language

Selecting Store Demo

or Home Use

Selecting an antenna

Selecting a channel The channel search will start automatically.

Setting the Clock

Mode

Viewing the HD

Connection Guide. Enjoy your TV.

Press the ▲ or ▼ button, then press the ENTER Select the desired OSD (On Screen Display) language.

Press the ◄ or ► button, then press the ENTER

Select the y Home Use mode. Store Demo Mode is for retail environments.

To return the unit’s settings from y Store Demo to Home Use (standard): Press the volume button on the TV. When you see the volume in the OSD, press and hold MENU for 5 sec.

Press the ▲ or ▼ button, then press the ENTERE button. Select Air, Cable or Air+Cable.

For more information, refer to Channel → Auto Program. (P. 12)

✎

Press the

Set the Clock Mode automatically or manually.

If you select the

✎

The connection method for the best HD screen quality is displayed.

Press the ENTER

ENTERE button at any time to interrupt the memorization process.

Auto, select the time zone where you live.

button.

ANT OUT

If You Want to Reset This Feature...

O m

→ Setup → Plug & Play →ENTERE

English

Setup

Plug & Play

Time

Menu Language : English

Caption : Off

Security

Network

General

PIP : Off

Connections

R PB Y

R-AUDIO-L

R PB Y

R-AUDIO-L

R PB Y

W W

BGRRWY

R-AUDIO-L

R PB Y

W Y

BGR WGR

W W

BGRR

Connecting to an AV Device

Using an HDMI / DVI Cable: HD connection (up to 1080p)

We recommend using the HDMI connection for the best quality HD picture. Available devices: DVD, Blu-ray player, HD cable box, HD satellite receiver (STB).

02 Connections

Red White

✎

HDMI IN 1(DVI)

When using an HDMI/DVI cable connection, you must use the

, 2, 3, 4 / PC/DVI AUDIO IN

BD/DVD player/

HD cable/sat box

HDMI OUT

HDMI IN 1(DVI) jack for video. A DVD, Blu-ray

Device

AUDIO OUT

DVI OUT

player, HD cable box, HD STB satellite receiver, cable box, or STB satellite receiver may require a DVI-HDMI (DVI to HDMI) cable or DVI-HDMI (DVI to HDMI) adapter. The PC/DVI AUDIO IN jack is required for audio

If an external device such as a DVD / Blu-ray player / cable box / satellite receiver (Set-Top Box) supporting

HDMI versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound / annoying ﬂ icker abnormal color).

If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you suspect the

version is older than 1.3, contact the provider of the device to conﬁ rm the HDMI version and request an upgrade. It is recommended you purchase an HDMI-certiﬁ ed cable. Otherwise, the screen may appear blank or a connection

error may occur.

Using a Component Cable: (up to 1080p), Using an Audio / Video Cable: (480i only)

Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR

Blu-ray player

VCR

AUDIO OUT

VIDEO OUT

AUDIO OUT

COMPONENT OUT

For better picture quality, the

✎

Component connection is recommended over the A/V connection.

Yellow Red White Red Blue Green

English

Connections

Connecting to an Audio Device

Using an Optical (Digital) or Audio (Analog) Cable Connection

Available devices: Digital Audio System, Ampliﬁ er, Home Theater

Headphones

OPTICAL

✎

DIGITAL AUDIO OUT (OPTICAL)

When a Digital Audio System is connected to the xDIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system.

5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.

When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack. When the

TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theater.

Headphones ✎H Headphones may be connected to the headphones output on your set. While the headphones are connected, the sound from the built-in speakers will be disabled.

The available sound function can be restricted when connecting headphones to the TV.

The headphone volume and TV volume are adjusted separately.

Digital Audio

System

Using an HDMI/DVI Cable / a D-sub Cable

DVI OUT

English

Connecting to a PC

AUDIO OUT

PC OUT

AUDIO OUT

English

02 Connections

Display Modes (D-Sub and HDMI/DVI Input)

Optimal resolution is 1920X1080@60Hz.

Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V)

IBM

MAC

VESA CVT

VESA DMT

VESA GTF

VESA DMT / DTV CEA 1920 x 1080p 67.500 60.000 148.500 +/+

640 x 350 31.469 70.086 25.175 +/720 x 400 31.469 70.087 28.322 -/+ 640 x 480 35.000 66.667 30.240 -/832 x 624 49.726 74.551 57.284 -/-

1152 x 870 68.681 75.062 100.000 -/-

720 x 576 35.910 59.950 32.750 -/+ 1152 x 864 53.783 59.959 81.750 -/+ 1280 x 720 56.456 74.777 95.750 -/+ 1280 x 960 75.231 74.857 130.000 -/+

640 x 480 31.469 59.940 25.175 -/-

640 x 480 37.861 72.809 31.500 -/-

640 x 480 37.500 75.000 31.500 -/-

800 x 600 37.879 60.317 40.000 +/+

800 x 600 48.077 72.188 50.000 +/+

800 x 600 46.875 75.000 49.500 +/+ 1024 x 768 48.363 60.004 65.000 -/1024 x 768 56.476 70.069 75.000 -/1024 x 768 60.023 75.029 78.750 +/+ 1152 x 864 67.500 75.000 108.000 +/+

1280 x 1024 63.981 60.020 108.000 +/+ 1280 x 1024 79.976 75.025 135.000 +/+

1280 x 800 49.702 59.810 83.500 -/+ 1280 x 800 62.795 74.934 106.500 -/+ 1280 x 960 60.000 60.000 108.000 +/+ 1280 x 720 45.000 60.000 74.250 +/+ 1360 x 768 47.712 60.015 85.500 +/+ 1440 x 900 55.935 59.887 106.500 -/+ 1440 x 900 70.635 74.984 136.750 -/+

1680 x 1050 65.290 59.954 146.250 -/+

1280 x 720 52.500 70.000 89.040 -/+

1280 x 1024 74.620 70.000 128.943 -/-

NOTE

✎✎

For HDMI/DVI cable connection, you must use the xHDMI IN 1(DVI) jack. The interlace mode is not supported.

The set might operate abnormally if a non-standard video format is selected.

Separate and Composite modes are supported. SOG (Sync On Green) is not supported.

Input Cables (Sold Separately)

HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA

Connections

PRE-CH

TOOL

GUIDE

INFO

HLI

ONTENT

RETURN

EXIT

CH LIST

P . SIZE

Source List

Use to select TV or an external input sources such as a DVD / Blu-ray player / cable box / STB satellite receiver.

Basic Features

Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions.

1 MENU button: Displays the main on-screen menu. 2 ENTER

3 RETURN button: Returns to the previous menu. 4 EXIT button: Exits the on-screen menu.

Changing the Input source

O m

TV / AV1 / AV2 / Component1 / ■ Component2 / PC / HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / USB

select an item. Conﬁ rm the setting.

→ Input → Source List → ENTER

You can only choose external

✎

devices that are connected to the TV. In the

Source List, connected inputs will be highlighted. PC

✎

always stay activated.

How to Navigate Menus

/ Direction button: Move the cursor and

Edit Name

O m

VCR / DVD / Cable STB / Satellite STB / PVR STB / ■ AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA:

Name the device connected to the input jacks to make your input source selection easier.

✎

When a PC with a resolution of 1920X1080@60Hz. is connected to the HDMI IN 1(DVI) port, you should set the port to DVI PC mode under Edit Name.

✎

When connecting an HDMI/DVI cable to the

1(DVI) port, you should set to DVI PC or DVI Devices

mode under Edit Name.

How to Operate the OSD (On Screen Display)

The access step may differ depending on the selected menu.

▲/▼ Select an icon with the ▲ or ▼

ENTER

▲/▼

◄/►

ENTER

EXIT

→ Input → Edit Name → ENTER

The main menu options appear on the screen:

Picture, Sound, Channel, Setup, Input, Application, Support.

button. Press ENTERE access the

submenu. Select the desired submenu with

the ▲ or ▼ button. Adjust the value of an item with the

◄ or ► button. The adjustment in the OSD may differ depending on the selected menu.

Press ENTERE to conﬁ rm the selection.

Press EXIT.

HDMI IN

English

Using the INFO button (Now & Next guide)

800 ﬁve

CHLIST

INFO

POWER

P . SIZE

P . MODE

GUIDE

CHLIST

INFO

The display identiﬁ es the current channel and the status of certain audio-video settings.

The Now & Next guide shows daily TV program information for each channel according to the broadcasting time.

Scroll y ◄, ► to view information for a desired program while watching the current channel.

Globo HD

DTV Air

05.1

TELA QUENTE (HD)

HE-AAC

1080i HD

DESVENTURAS EM SERIE (HD)

| 10 | Muiti

10:06 pm - 12:10 am

Planning your viewing

Guide

O m

The EPG (Electronic program Guide) information is provided by broadcasters. Using program schedules provided by broadcasters, you can specify programmes you want to watch in advance so that the channel automatically changes to the selected program channel at the speciﬁ ed time. Program entries may appear blank or out of date depending on a channel status.

Using Channel View

Guide

Channel View - TV

02.1 Discovery



04.1 DiscoveryH&L

05.1 ve

07.1 price-drop.tv

090.1 QVC



11.1 R4DTT

View Mode

→ Channel → Guide → ENTER

40 with Dynamite MC

The Distillery

Smash Hits! Sunday

DTVAir800ve

Home and Away 7:00 pm - 7:30 pm

Drama

Dani is devastated when scott makes clear his views on marriage...

7:00 pm - 8:00 pm

American Chopper Tine Team

Programmes resume at 06:00

Home and...

No Information

QVC Selection

No Information

-2 Hours

+2 Hours

)

Family Affairs

Exit

Information

8:00 pm - 9:00 pm

Fiv...

Fri, 1 Jan 7:00 pm

EWatch

Information

Fri, 1 Jan 7:00 pm

)Dark Angel

Page

Watch

Using Scheduled View

Guide

DTVAir800ve

Family Affairs

7:30 pm - 8:00 pm

Drama

Scheduled View

7:30 pm Today 8:15 pm Today

Tanya confesses all to a stunned Babs. Conrad is anxious to hear...

)

Family Affairs 800 ve

)

Dark Angel

A View Mode Information E Cancel

800 ve

1 5 7

Red (View Mode): View the list of programmes that

are playing now or coming up.

Green (-2 hours): Viewing the list of programmes to be

broadcasted before 2 hours.

Yellow (+2 hours): Viewing the list of programmes to

be broadcasted after 2 hours.

Blue (Exit): Exit the guide.

Information: Displays details of the selected

program.

(Page): Moves to the previous / next page.

ENTERE button

When selecting the current program, you can – watch the selected program.

When selecting the future program, you can – reserve to watch the selected program. To cancel the schedule, press the ENTERE button again and select Cancel Schedules.

03 Basic Features

Fri, 1 Jan 7:00 pm

1 2 3 4 5 6 7

English

Basic Features

POWER

F AV . CH

CH LIST

P . MODE

P . SIZE

MTS

INFO

TOOLS

CH LIST

Channel Menu

Seeing Channels ¦

Channel List

O m

ENTER

Add, delete or set Favorite channels and use the program guide for digital broadcasts.

Select a channel in the All Channels, Added Channels, Favorite or Programmed screen by pressing the ▲ / ▼ buttons, and pressing the ENTER button. Then you can watch the selected channel.

Added Channels

Air A Antenna B Zoom C Select Page T Tools

■ All Channels: Shows all currently available

■ Added Channels: Shows all added channels.

■ Favorite: Shows all favorite channels.

■ Programmed: Shows all currently reserved

✎

Using the color buttons with the

x x

number.

Select desired channels and press the Yellow button to set all the selected channels at the same time. The

T x (Tools): Displays the Channel List option menu.

(The Options menus may differ depending on the situation.)

Channel Status Display Icons

Icons Operations

)

(

→ Channel → Channel List →

02 Air

04.1 ♥TV#6

05 Air

07 Air 09 Air

11.1 ♥TV#9

13 Air

14.1 ♥TV#10

16.1 ♥TV#11

channels.

programs.

Channel List

Red (Antenna): Switches to Air or Cable.

Green (Zoom): Enlarges or shrinks a channel

Yellow (Select): Selects multiple channel lists.

mark appears to the left of the selected channels.

(Page): Move to next or previous page.

A channel selected. A channel set as a Favorite. A reserved program. A locked channel. A program currently being broadcast.

Using Favorite Channels ¦

O m

Add to Favorite / Delete from Favorite

Set channels you watch frequently as Favorites.

1. Select a channel and press the TOOLS

button.

2. Add or delete a channel using the Add to Favorite or Delete from Favorite menu

respectively.

Added Channels

Air A Antenna B Zoom C Select Page T Tools

→ Channel → Channel List → ENTER

02 Air

04.1 ♥TV#6

05 Air

07 Air 09 Air

11.1 ♥TV#9

13 Air

14.1 ♥TV#10

16.1 ♥TV#11

Delete Add to Favorite Lock Timer Viewing Channel Name Edit Select All

Memorizing channels ¦

O m

Antenna (Air / Cable)

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).

→ Channel → ENTER

Auto Program

Air ■ : Air antenna signal. Cable ■ : Cable antenna signal. Air+Cable ■ : Air and Cable antenna.

✎

NOTE

If the antenna is connected to

select Cable and if it is connected to ANT 1 IN

(AIR), select Air.

If both

ANT 1 IN and ANT 2 IN are connected, select

Air+Cable.

ANT 2 IN (CABLE),

English

03 Basic Features

How to Stop Auto Programming

button.

1. Press the ENTER

2. A message will ask Stop Auto Program? Select Yes by

pressing the ◄ or ► button.

3. Press the ENTER

Editing channels ¦

O m

Channel Name Edit

1. Select a channel and press the TOOLS button.

2. Edit the channel name using the Channel Name Edit

menu. Channel Name Edit ■ (analog channels only): Assign your

own channel name.

→ Channel → Channel List → ENTER

Other Features ¦

O m

→ Channel → ENTER

Channel List

O m

Channel List Option Menu

Set each channel using the Channel List menu options (Add / Delete, Lock / Unlock, Timer Viewing, Select All / Deselect All). Option menu items may differ depending on the channel

status.

1. Select a channel and press the TOOLS button.

2. Select a function and change its settings. Add / Delete ■ : Delete or add a channel to display the

channels you want.

Lock / Unlock ■ : Lock a channel so that the channel cannot be selected and viewed.

→ Channel → Channel List → ENTER

NOTE

✎

All deleted channels will be shown on the xAll Channels menu.

A gray-colored channel indicates the channel

has been deleted. The xAdd menu only appears for deleted channels. Delete a channel from the xAdded Channels or

Favorite menu in the same manner.

✎

NOTE

This x function is available only when the Child Lock is set to On.

The PIN input screen appears. Enter your

4-digit PIN, the default of which is “0-0-0-0”. Change the PIN using the Change PIN option.

Timer Viewing ■ : You can set a desired channel to be displayed automatically at the set time; even when you are watching another channel. Set the current time ﬁrst to use this function. (P. 19)

1. Press the ◄ / ► /▲ / ▼ buttons to select the desired channel in Channel List.

2. Press the TOOLS button, then select Timer Viewing.

3. Scroll up or down to adjust the settings in the box,

or use the numeric buttons on your remote for entering the date and time.

If you selected

✎

in Repeat, you can enter the date you want.

Select OK, then press the ENTERE button when done.

NOTE

✎

Only memorized channels can be reserved.

Reserved programs will be displayed in the

Programmed menu. When a digital channel is selected, press the

button to view the digital program.

Select All ■ : Select all the channels in the channel List. Deselect All ■ : Deselect all the selected channels.

You can only select

✎

more channels are selected.

Once, Every Week or Every Day

►

Deselect All when one or

Programmed

(in Channel List) You can view, modify or delete a show you have reserved to

watch.

1. Press the

2. Press the ◄ and ▼ button to move Programmed

menu. Change Info ■ : Change a show you have reserved to

watch. Cancel Schedules ■ : Cancel a show you have reserved

to watch. Information ■ : Display a show you have reserved

to watch. (You can also change the reservation Information.)

Select All / Deselect All: ■ Select or deselect all reserved programs.

ENTERE

button to select Channel List.

Basic Features

CHLIST

P . MODE

P . SIZE

INFO

Fine Tune

(analog channels only) If the reception is clear, you do not have to ﬁne tune the

channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, ﬁne tune the channel manually.

Select y Fine Tune in the Channel menu. Fine tuned channels that have been saved are marked

✎

with an asterisk “*” on the right-hand side of the channel number in the channel banner.

✎

To reset the fine-tuning, select

Reset.

LNA (Off / On)

If the TV is operating in a weak-signal area, the LNA (Low Noise Ampliﬁer) function can improve the reception (a lownoise preampliﬁer boosts the incoming signal).

Color System (Auto / PAL-M / PAL-N / NTSC)

Normally the TV can receive image and sound with good quality in Auto mode. This mode detects the color signal sources automatically. If the color implementation is unsatisfactory, select any of PAL-M, PAL-N or NTSC.

Picture Menu

Changing the Preset Picture Mode ¦

O m

→ Picture → Mode → ENTER

Mode

Select your preferred picture type.

Dynamic ■ : Suitable for a bright room. Standard ■ : Suitable for a normal

environment. Natural ■ : Suitable for an eye comfortable

display.

Natural is not available in PC mode.

✎

Movie ■ : Suitable for watching movies in a dark room.

Adjusting picture settings ¦

O m

→ Picture → Backlight → ENTER

Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)

Your television has several setting options for picture quality control.

✎

NOTE

When you make changes to xBacklight, Contrast, Brightness, Sharpness, Color or Tint (G/R), the OSD will be adjusted accordingly.

In PC mode, you can only make changes to

Backlight, Contrast and Brightness. Settings can be adjusted and stored for each

external device connected to the TV.

Economical Solutions ¦

ECO Solution

O m

Energy Saving (Off / Low / Medium / High / ■ Picture Off / Auto)

brightness of the TV in order to reduce power consumption. If you select Picture Off, the screen is turned off , but the sound remains on. Press any button except volume button to turn on the screen.

Eco Sensor (Off / On) ■ : To enhance your power savings; the picture settings will automatically adapt to the light in the room.

Min Backlight: When ECO sensor is On, the minimum screen brightness can be adjusted manually.

No Signal Power Off (Off / 15 min / 30 min / 60 min) ■ : To avoid unnecessary energy consumption, set how long you want the TV to remain on if it's not receiving a signal.

→ Picture → ECO Solution → ENTER

✎

If you adjust the be set to Off.

✎

Eco Sensor is On, the display brightness

may change (become slightly darker or brighter) depending on the surrounding light intensity.

✎

Disabled when the PC is in power saving mode.

: This adjust the

Backlight, the Eco Sensor will

English

03 Basic Features

Changing the Picture Options ¦

Advanced Settings

O m

ENTER

(available in Standard / Movie mode) Compared to previous models, new Samsung TVs have a

more precise picture.

✎

In PC mode, you can only make changes to Contrast, Gamma and White Balance.

BlackTone :Off  ►

Dynamic Contrast : Medium

Shadow Detail : 0

Gamma : 0

Expert Pattern : Off

RGB Only Mode : Off

Color Space : Native

Black Tone (Off / Dark / Darker / Darkest) ■ : Select the black level to adjust the screen depth.

Dynamic Contrast (Off / Low / Medium / High) ■ : Adjust the screen contrast.

Shadow Detail ■ : Increase the brightness of dark images.

Gamma ■ : Adjust the primary color intensity. Expert Pattern ■ (Off / Pattern 1 / Pattern 2): By

running the Expert Pattern function, the picture can be calibrated without a generator or ﬁlter. If the OSD menu disappears or a menu other than the Picture menu is opened, the calibration is saved and the Expert Pattern window disappears.

RGB Only Mode (Off / Red / Green / Blue) ■ : Displays the Red, Green and Blue color for making ﬁne adjustments to the hue and saturation.

Color Space (Auto / Native / Custom) ■ : Adjust the range of colors available to create the image.

→ Picture → Advanced Settings →

Advanced Settings

▼

U Move E Enter R Return

✎

Disabled under PC mode.

✎

While the output.

Only enabled on DTV / Component / HDMI.

✎

Expert Pattern is running, sound is not

Dynamic

White Balance ■ : Adjust the color temperature for a more

natural picture. R-Offset / G-Offset / B-Offset: Adjust each color's

(red, green, blue) darkness. R-Gain / G-Gain / B-Gain: Adjust each color's (red,

green, blue) brightness. Reset: Resets the White Balance to it's default settings.

10p White Balance (Off / On) ■ : Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness.

Available when the picture mode is set to

✎

and when the external input is set to HDMI or Component.

Some external devices may not support this

✎

function.

Interval: Select interval to adjust. Red: Adjust the red level. Green: Adjust the green level. Blue: Adjust the blue level. Reset: Resets the 10p White Balance to its default

settings.

Flesh Tone ■ : Emphasize pink "flesh tone". Edge Enhancement (Off / On) ■ : Emphasize object

boundaries. xvYCC (Off / On) ■ : Setting the xvYCC mode on

increases detail and color space when watching movies from an external device (e.g. DVD player) connected to the HDMI or Component IN jacks.

Available when the picture mode is set to

✎

and when the external input is set to HDMI or Component.

Some external devices may not support this

✎

function.

Movie

Basic Features

CH LIST

P . SIZE

Picture Options ¦

O m

ENTER

In PC mode, you can only make changes to the ✎Color

Ton e, Size and Auto Protection Time.

Color Tone (Cool / Normal / Warm1 / Warm2) ■

Size ■ : Your cable box / satellite receiver

may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.

16:9: Sets the picture to 16:9 wide mode.

Zoom1: Use for moderate magniﬁcation. Zoom2: Use for a stronger magniﬁcation. Wide Fit: Enlarges the aspect ratio of the picture to ﬁt

the entire screen.

4:3: Sets the picture to basic (4:3) mode.

Screen Fit: Displays the full image without any cut-off

when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are input.

✎

NOTE

After selecting xZoom1, Zoom2 or Wide Fit:

1. Press the ► button to select Position.

2. Press the ENTER

→ Picture → Picture Options →

Picture Options

ColorTone :Normal  ►

Size : 16:9

Digital Noise Filter : Auto

MPEG Noise Filter : Auto

HDMI Black Level : Normal

Film Mode : Off

Auto Motion Plus : Standard

Warm1

✎ ✎

✎

or Warm2 will be deactivated when the

picture mode is Dynamic. Settings can be adjusted and stored for each

external device connected to an input on the TV.

Do not watch in 4:3 format for a long time, traces of borders displayed on the left, right and center of the screen may cause image retention(screen burn) which are not covered by the warranty.

▼

U Move E Enter R Return

button.

3. Press the ▲ or ▼ button to move the

picture up or down.

4. Press the ENTER

5. Press the ► button to select Reset.

6. Press the ENTER

After selecting Screen Fit in HDMI (1080i / 1080p)

or Component (1080i / 1080p) mode: Adjusts the Position or Size by using▲,▼,◄ or ► button.

HD (High Definition): 16:9 - 1080i / 1080p

(1920x1080), 720p (1280x720) Settings can be adjusted and stored for each

external device you have connected to an input on the TV.

Input Source Picture Size

ATV, AV, Component (480i, 480p) DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080p) PC 16:9, 4:3

Digital Noise Filter (Off / Low / Medium / High / Auto ■ / Auto Visualization ): If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may

appear on the screen.

When the signal is weak, try other options until the

✎

best picture is displayed.

Auto Visualization: When changing analog channels, displays signal strength.

Only available for analog channels.

✎

When bar is green, you are receiving the best

✎

possible signal.

button.

16:9, Zoom1, Zoom2, 4:3

16:9, 4:3, Wide Fit, Screen Fit

English

03 Basic Features

MPEG Noise Filter (Off / Low / Medium / High / ■

POWER

FAV . CH

CHLIST

MEDIA.P

P . MODE

S.MODE

P . SIZE

MTS

INFO

TOOLS

Auto): Reduces MPEG noise to provide an improved picture quality.

Disabled under PC mode.

✎

HDMI Black Level (Normal / Low) ■ : Selects the black level on the screen to adjusts the screen depth.

Available only in HDMI mode (RGB signals).

✎

Film Mode (Off / Auto1 / Auto2) ■ : Sets the TV to automatically sense and process ﬁlm signals from all sources and adjusts the picture for optimum quality.

Available in TV, AV, COMPONENT (480i / 1080i)

✎

and HDMI (480i / 1080i).

Auto Motion Plus (Off / Clear / Standard / Smooth / ■ Custom / Demo): Enhances motion in fast moving scenes.

Auto Protection Time (2 hours / 4 hours / 8 hours ■ / 10 hours / Off): If the screen remains idle with a still

image for a certain period of time deﬁned by the user, the screen saver is activated to prevent the formation of ghost images on the screen.

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP) Depending on the version of Windows and the video card,

the actual screens on your PC will probably look different, but the same basic set-up information will apply in most cases. (If not, contact your computer manufacturer or Samsung Dealer.)

1. Click on “Control Panel” on the Windows start menu.

2. Click on “Appearance and Themes” in the “Control

Panel” window and a display dialog-box will appear.

3. Click on “Display” and a display dialog box will appear.

4. Navigate to the “Settings” tab on the display dialog-box.

The correct size setting (resolution) [Optimum: 1920 X y 1080 pixels]

If a vertical-frequency option exists on your display y settings dialog box, the correct value is ‘60’ or ‘60 Hz’. Otherwise, just click ‘OK’ and exit the dialog box.

Sound Menu

Picture Reset (OK / Cancel)

Resets your current picture mode to it's default settings.

Setting up the TV with your PC ¦

Set the input source to PC.

Auto Adjustment

O m

ENTER

Adjust frequency values/positions and ﬁne tune the settings automatically.

✎

Not available when connecting through HDMI/DVI cable.

→Picture → Auto Adjustment →

Screen

Coarse / Fine ■ : Removes or reduces picture noise. If the

noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Finetune again. After the noise has been reduced, readjust the picture so that it is aligned to the center of screen.

Position ■ : Adjust the PC’s screen positioning if it does not ﬁt the TV screen. Press the ▲ or ▼ button to adjust the Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position.

Image Reset ■ : Resets the image to default settings.

Changing the Preset Sound Mode ¦

O m

ENTER

SRS TheaterSound

Standard ■ : Selects the normal sound

mode.

Music ■ : Emphasizes music over voices. Movie ■ : Provides the best sound for

movies.

Clear Voice ■ : Emphasizes voices over other sounds. Amplify ■ : Increase the intensity of high-frequency sound

to allow a better listening experience for the hearing impaired.

→ Sound → SRS TheaterSound →

Basic Features

CH LIST

P . MODE

P . SIZE

MTS

INFO

Adjusting sound settings ¦

O m

→ Sound → Equalizer → ENTER

Equalizer

Adjusts the sound mode (standard sound mode only).

Balance L/R ■ : Adjusts the balance between the right and left speaker.

100Hz / 300Hz / 1kHz / 3kHz / 10kHz ■ (Bandwidth Adjustment): Adjusts the level of speciﬁc bandwidth frequencies.

Reset ■ : Resets the equalizer to its default settings.

Sound Settings ¦

O m

SRS TruSurround HD (Off / On)

(standard sound mode only) This function provides a virtual 5.1 channel surround sound experience through a pair of speakers or headphones using HRTF (Head Related Transfer Function) technology.

→ Sound → ENTER

SRS TruDialog (Off / On)

(standard sound mode only) SRS TruDialog emphasizes voice while maintaining the

background sound level.

Audio Language

(digital channels only) Change the default value for audio languages.

The available language may differ depending on the

✎

broadcast.

Multi-Track Sound (MTS)

(analog channels only)

Mono ■ : Choose for channels that are broadcasting in mono or if you are having difﬁculty receiving a stereo signal.

Stereo ■ : Choose for channels that are broadcasting in stereo.

SAP ■ : Choose to listen to the Separate Audio Program, which is usually a foreign-language translation.

✎

Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP. 3

Auto Volume (Off / Normal / Night)

To equalize the volume level on each channel, set to Normal.

Night ■ : This mode provides an improved sound

experience compared to Normal mode, making almost no noise. It is useful at night.

Speaker Select (External Speaker / TV Speaker)

A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker.

When

✎

Speaker Select is set to External Speaker, the

volume and MUTE buttons will not operate and the sound settings will be limited.

✎

Speaker Select is set to External Speaker, you

When should use these settings.

TV speaker: Off External speaker: On

When ✎Speaker Select is set to TV Speaker, you should use these settings.

TV speaker: On External speaker: On

If there is no video signal, both speakers will be mute.

✎

SPDIF Output

SPDIF (Sony Philips Digital Interface) is used to provide digital sound, reducing interference going to speakers and various digital devices such as an A/V Receiver/Home theater.

Audio Format ■ : During the reception of a digital TV broadcast, you can select the Digital Audio output (SPDIF) format from the options PCM or Dolby Digital.

By connecting to 5.1ch speakers in a dolby

✎

digital setup, maximize your interactive 3D sound experience.

Audio Delay ■ : Correct audio-video sync problems, when watching TV or video, and when listening to digital audio output using an external device such as an AV receiver (0ms ~ 250ms).

Sound Reset (OK / Cancel)

Reset all sound settings to the factory defaults.

English

03 Basic Features

Setting the Time ¦

O m

Setup Menu

→ Setup → Time → ENTER

Setting the On / Off Timer ¦

O m

ENTER

Timer 1 / Timer 2 / Timer 3 ■ : Three different on / off

timer settings can be made. You must set the clock ﬁrst.

→ Setup → Time → Timer 1 →

Time

Clock ■ : Setting the clock is for using various timer

features of the TV.

The current time will appear every time you press the INFO button.

✎

If you disconnect the power cord, you have to set the clock again.

Clock Mode: Set up the current time manually or automatically.

Auto – : Set the current time automatically using the time from the digital channel.

The antenna must be connected in order to set

✎

the time automatically.

Manual – : Set the current time manually.

Depending on the broadcast station and signal,

✎

the auto time set up may not be correct. In this case, set the time manually.

Clock Set: Set the Day, Month, Year, Hour, Minute and am/pm.

Available only when

✎

Manual. You can set the

✎

Minute directly by pressing the number buttons on the remote control.

Time Zone: Select your time zone.

✎

This function is only available when the

Mode is set to Auto.

Using the Sleep Timer ¦

O m

ENTER

Sleep Timer ■

after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).

→ Setup → Time → Sleep Timer →

To cancel the

✎

Clock Mode is set to

Day, Month, Year, Hour and

Clock

: Automatically shuts off the TV

Sleep Timer, select Off.

On Time

Timer 1

▲

Inactivate 12 00 am

▼

Off Time

Inactivate 12 00 am

Volume Source Antenna Channel

10 TV Air 0

Repeat

Once

On Time / Off Time: Set the hour, minute, am/pm and activate / inactivate. (To activate the timer with the setting you have chosen, set to Activate.)

Volume: Set the desired volume level. Source: Select TV or USB content to be played when

the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV)

Antenna (when the Source is set to TV): Select Air or Cable.

Channel (when the Source is set to TV): Select the

desired channel. Contents (when the Source is set to USB): Select a

folder in the USB device containing music or photo ﬁles to be played when the TV is turned on automatically.

If there is no music file on the USB device or the

✎

folder containing a music file is not selected, the Timer function does not operate correctly.

When there is only one photo file in the USB, the

✎

Slide Show will not play. If a folder name is too long, the folder cannot be

✎

selected. Each USB you use is assigned its own folder.

✎

When using more than one of the same type of USB, make sure the folders assigned to each USB have different names.

Sun Mon Tue Wed Thu Fri Sat

L Move U Adjust E Enter R Return

Basic Features

CH LIST

MEDIA.P

P . MODE

P . SIZE

MTS

INFO

Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you convenience. If you

select Manual, you can set up the day you want to activate the timer.

The

✎ c

mark indicates the day is selected.

✎

Auto Power Off (available only when the TV is turned on by the Timer): The TV will be automatically turned off after 3 hours of being left idle to prevent overheating.

Locking Programs ¦

O m

→ Setup → Security → ENTER

Security

The PIN input screen appears before the setup screen. ✎ Enter your 4-digit PIN, the default of which is 0-0-0-0. ✎

Change the PIN using the Change PIN option. Child Lock (Off / On) ■ : Lock channels in Channel List,

to prevent unauthorized users, such as children, from watching unsuitable program.

Parental Lock ■ : Prevent unauthorized users, such as children, from watching unsuitable program with a userdeﬁned 4-digit PIN code.

Allow All: Unlock all TV ratings. Change PIN ■ : The Change PIN screen will appear.

Choose any 4 digits for your PIN and enter them. As soon as the 4 digits are entered, the Conﬁrm New PIN screen appears. Re-enter the same 4 digits. When the Conﬁrm screen disappears, your PIN has been memorized.

If you forget the PIN, press the remote-control

✎

buttons in the following sequence, which resets the pin to “0-0-0-0” : POWER (off) → MUTE → 8 → 2 → 4 → POWER (on).

Other Features ¦

O m

→ Setup → ENTER

Menu Language

Set the menu language.

1. Select Menu Language and press the ENTER

2. Choose desired language and press the ENTER

button.

Caption

(On-Screen Text Messages)

Caption (Off / On) ■ : You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen.

The Caption feature does not

✎

work in Component, HDMI or PC modes.

Caption Mode ■ : You can select the desired caption mode.

✎

The availability of captions depends on the program being broadcasted.

CC1~CC4 / Text1~Text4: (analog channels only) The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to the TV. (Depending on the broadcasting signal, the Analog Caption function may or may not work with digital channels.)

Network (Network Type / Network Setup / Network Test / Samsung Wireless Link / SWL connect)

For details on set up options, refer to the “Network Connection” instructions. (P. 23~28)

General

Game Mode (Off / On) ■ : When connecting to a game

console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting the game menu.

✎

NOTE

Precautions and limitations for game mode

To disconnect the game console and connect – another external device, set Game Mode to Off in the setup menu.

If you display the TV menu in – Game Mode, the screen shakes slightly.

Game Mode

set to TV or PC. After connecting the game console, set

to On. Unfortunately, you may notice reduced picture qualit y.

Game Mode is On:

Picture – mode is set to Standard and Sound mode is set to Movie.

Equalizer – is not available.

is not available when the input source is

Game Mode

English

03 Basic Features

BD Wise (Off / On) ■ : Provides the optimal picture quality

for Samsung DVD, Blu-ray and Home Theater products which support BD Wise. When BD Wise is turned On, the picture mode is automatically changed to the optimal resolution.

Available when connecting Samsung products

✎

that support BD Wise through a HDMI cable.

Menu Transparency (Bright / Dark) ■ : Set the Transparency of the menu.

Melody (Off / Low / Medium / High) ■ : Set so that a melody plays when the TV is turned on or off.

NOTE

✎

Only available when the Input source is set to TV.

To turn the melody off, set Melody to Off. The Melody does not play.

When no sound is output from the TV because the –

MUTE button has been pressed.

When no sound is output from the TV because the – volume has been reduced to minimum with the

VOL – button.

When the TV is turned off by – Sleep Timer function.

AV Color System ( Auto / PAL-M / PAL-N / NTSC ) ■

Normally the TV can receive image and sound with good quality when in the mode AUTO. This mode detects the signal color system automatically. In case of some signal reception with color unsatisfactory, select the AV Color System Mode to PAL-M, PAL-N or NTSC.

This function is available only in AV mode.

✎

Picture In Picture (PIP) ¦

PIP

O m

You can watch the TV tuner and one external video source simultaneously. PIP (Picture-in-Picture) does not function in

the same mode.

NOTE

✎

For PIP sound, refer to the xSound Select instructions. If you turn the TV off while watching in PIP mode, the

PIP window will disappear. You may notice that the picture in the PIP window

becomes slightly unnatural when you use the main screen to view a game or karaoke.

PIP Settings

→ Setup → PIP → ENTER

Main picture Sub picture Component1, Component2,

HDMI1/DVI, HDMI2, HDMI3, HDMI4, PC

PIP (Off / On) ■ : Activate or deactivate the PIP function. Air / Cable (Air / Cable) ■ : Select either Air or Cable as

the input source for the sub-screen.

Channel ■ : Select the channel for the sub-screen. Size ( ■

/ Ã): Select a size for the sub-picture.

Position ( ■ sub-picture.

Sound Select (Main / Sub) ■ : You can choose the desired sound (Main or Sub) in PIP mode.

/ – / — / œ): Select a position for the

Support Menu

O m

→ Support → ENTER

Self Diagnosis

Picture Test ■ : Use to check for picture problems. If the

problem continues to occur, check the color pattern. Yes: If the test pattern does not appear or there is

noise in the test pattern, select Yes. There may be a problem with the TV. Contact Samsung’s Call Center for assistance.

No: If the test pattern is properly displayed, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.

Sound Test ■ : Use the built-in melody sound to check for sound problems.

If you hear no sound from the TV’s speakers,

✎

before performing the sound test, make sure

Speaker Select is set to TV speaker in the Sound menu.

The melody will be heard during the test even if

✎

Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button.

Yes: If you can hear sound only from one speaker or not at all during the sound test, select Yes. There may be a problem with the TV. Contact Samsung’s Call Center for assistance.

Advanced Features

No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.

Signal Information ■ : (digital channels only) An HD channel’s reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength.

Troubleshooting ■ : If the TV seems to have a problem, refer to this description.

If none of these troubleshooting tips apply, contact

✎

the Samsung customer service center.

Software Upgrade

Software Upgrade can be performed via the TV when it is connected to the Internet or by downloading the latest ﬁrmware from samsung.com to USB memory device.

Current Version - the software already installed in the TV.

✎

Software is represented as ‘Year/Month/Day_Version’.

Software Upgrade

CurrentVersion 2010/12/30_000365

ByUSB   ►

By Online

Alternative Software

----/--/--_-----

By Online ■ : Upgrade the software using the Internet.

First, configure your network. For detailed

✎

procedures on using the Network Setup, refer to the “Setting the Network” instructions.

If the Internet connection does not operate

✎

properly, the connection may be broken. Please retry downloading. If the problem persists, download by USB and upgrade.

Alternative Software ■ (backup): Displays the Software version downloaded through By Online. During the software upgrading, When the Upgrade will discontinue from last step, this function be activated.

HD Connection Guide

Refer to this information when connecting external devices to the TV.

Contact Samsung

View this information when your TV does not work properly or when you want to upgrade the software. You can ﬁnd information regarding our call centers and how to download products and software.

U Move E Enter R Return

Installing the Latest Version

By USB ■ : Insert a USB drive

containing the ﬁrmware upgrade ﬁle, downloaded from www.samsung.com, into the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are complete. The TV will be turned off and on automatically after completing the ﬁrmware upgrade. When software is upgraded, video and audio settings you have made will return to their default settings. We advise you to write down your settings so that you can easily reset them after the upgrade.

English

USB Drive

TV Side Panel

English

04 Advanced Features

Advanced Features

Network Connection

You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection.

Connecting to a Wired Network ¦

You can attach your TV to your LAN using cable in three ways:

You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat y 5 cable. See the diagram below.

The Modem Port on the Wall

You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected y to an external modem. Use Cat 5 cable for the connection. See the diagram below.

The Modem Port on the Wall

Modem Cable

Depending on how your network is conﬁgured, you may be able to attach your TV to your LAN by connecting the LAN y port on the back of your TV directly to a network wall outlet using a Cat 5 cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in your house.

The LAN Port on the Wall

External Modem

(ADSL / VDSL / Cable TV)

External Modem

(ADSL / VDSL / Cable TV)

IP Sharer

(having DHCP server)

LAN Cable

LAN CableModem Cable

LAN Cable

TV Rear Panel

LAN Cable

If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you don’t have to enter them manually. Most home networks are Dynamic Networks. Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP). If you have a Windows computer, you can also get these values through your computer.

You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that

✎

support DHCP also let you use Static IP addresses.

Advanced Features

Network Setup (Auto)

Use the Automatic Network Setup when connecting your TV to a network that supports DHCP. To set up your TV’s cable network connection automatically, follow these steps:

How to set up automatically

1. Connect your TV to your LAN as described in the

previous section.

2. Turn on your TV, press the MENU button on your remote, use the ▲or▼button to select Setup, and then press the ENTER

3. Use the ▲or▼ button to select Network in the Setup menu, and then press the ENTER Network screen appears.

NetworkType :Wired ►

Network Setup

Network test

SWL(Samsung Wireless Link)

SWL Connect

4. On the Network screen, select Network Type.

5. Set Network Type to Wired.

6. Select Network Setup. The Network Setup screen

appears.

button.

Network

Off

U Move E Enter R Return

button. The

Network Setup (Manual)

Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address.

Getting the Network Connection Values

To get the Network connection values on most Windows computers, follow these steps:

1. Right click the Network icon on the bottom right of the

screen.

2. In the pop-up menu that appears, click Status.

3. On the dialog that appears, click the Support tab.

4. On the Support Tab, click the Details button. The

Network connection values are displayed.

How to set up manually

To set up your TV’s cable network connection manually, follow these steps:

1. Follow Steps 1 through 6 in the “How to set up

automatically” procedure.

2. Set Internet Protocol Setup to Manual.

3. Press the ▼ button on your remote to go to the ﬁrst

entry ﬁeld.

4. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use the number buttons on your

remote to enter numbers and the arrow buttons to move from one entry ﬁeld to another.

5. When done, press the RETURN button on your remote.

6. Select Network Test to check the Internet connectivity.

Network Setup

InternetProtocolSetup :Auto ►

IP Address :

Subnet Mask :

Gateway :

DNS : Auto

DNS Server :

U Move E Enter R Return

7. Set Internet Protocol Setup to Auto.

8. Auto acquires and enters the needed Internet values

automatically.

9. Wait two minutes, and then press the RETURN button

on your remote.

10. If the Network Function has not acquired the network connection values, go to the directions for Manual.

English

04 Advanced Features

Connecting Wireless Network ¦

To connect your TV to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN Adapter (WIS09ABGN, WIS09ABGN2, WIS10ABGN), which you connect to your TV’s back or side panel USB jack. See the illustration below.

To use the SWL(Samsung Wireless Link) function, connect to the

✎

USB 1 (HDD) port.

TV Side Panel

The LAN Port on

the Wall

Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts. com. Samsung’s Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsung recommends using IEEE 802.11N. When you play video over a IEEE 802.11B/G connection, the video may not play smoothly.

✎

NOTE

You must use the “Samsung Wireless LAN Adapter” (WIS09ABGN, WIS09ABGN2, WIS10ABGN) to use a wireless

network. Samsung Wireless LAN Adapter and The USB extension Cable are sold separately and are offered by select retailers,

Ecommerce sites and Samsungparts.com. To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports

DHCP, your TV can use a DHCP or static IP address to connect to the wireless network. Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer

is currently being used by another device nearby, this will result in interference and communication failure. If you apply a security system other than the systems listed blow, it will not work with the TV.

If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or

TKIPAES (WPS2Mixed) for your AP, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications.

If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button

Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode.

Keep the Samsung Wireless LAN Adapter at a distance from the TV. If you watch the TV with the Adapter connected

nearby, images may appear corrupted for some channels. If your router, modem, or device is not, it may not connect to the TV via the “Samsung Wireless LAN Adapter.”

Connection Methods x: You can setup the wireless network connection on six ways.

Samsung Auto Conﬁguration – PBC (WPS) – Auto Setup (Using the Auto Network Search function) – Manual Setup –

SWL (Samsung Wireless Link) – Ad-Hoc –

All of Samsung Wireless LAN Adapter shoud be connected directly to the TV's USB port. USB HUB are not

supported.

Notice

The picture may appear corrupted or have static for some channels when the TV is connected to the Samsung Wireless LAN Adapter.

Connect via an extension cable –

Wireless IP sharer

(AP having DHCP

LAN Cable

Server)

Samsung Wireless

LAN Adapter

Method

Advanced Features

Network Setup (Samsung Auto Conﬁguration)

This function is available in APs (Access Points) that support Samsung Auto Conﬁguration. If there is no such AP, you can connect through PBC (WPS) or manually.

This function is available when

✎

Wireless Link) set to Off.

✎

You can check for equipment that supports Samsung Auto Configuration on www.samsung.com.

How to set up using Samsung Auto Conﬁguration

1. Place the AP and TV next to each other and turn them on.

✎

Because the booting times of applications differ, you may have to wait for approximately 2 minutes.

If the LAN cable connected the WAN port of AP

✎

during Samsung Auto Configuration, you are able to complete until Internet connection test. If you do not connect, Samsung Auto configuration will check only device connecting of AP (Not check Internet).

2. After 2 minutes, connect the Samsung Wireless LAN Adapter to the TV. When the Samsung Wireless LAN Adapter is established, the pop-up window appears.

3. As soon as a connection is established, place the AP in parallel with the Samsung Wireless LAN Adapter giving a gap no larger than 25cm.

4. Wait until the connection is automatically established.

If the connection fails, reset the AP and then try

✎

again. If Samsung Auto Configuration does not connect

✎

your TV to your AP, a pop-up window appears on the screen notifying you of the failure. Reset the AP, and then try again. If the connection fails again, choose one of the other connection setup methods, PBC (WPS), auto, or manual.

5. After the connection is established, locate the sharer at the desired location.

If the AP settings have been changed or it is the

✎

first time you use the new AP after purchase, you need to set up again beginning from Step 1.

SWL(Samsung

6. Select Network Setup. The Network Setup screen

appears.

Network Setup

 Selectanetwork :NotSelected►

Internet Protocol Setup : Auto

IP Address :

Subnet Mask :

Gateway :

DNS : Auto DNS Server :

PBC(WPS) U Move E Enter R Return

7. Press the Red button on your remote.

8. Press the PBC (WPS) button on your router within 2

minutes. Your TV player automatically acquires all the network setting values it needs and connects to your network.

9. After the network connection is set up, press the

RETURN button to exit the Network Setup screen.

Network Setup (Auto)

Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a speciﬁed length you were asked to enter when you set up security for your wireless network. If you use this method of setting up the network connection, and have a Security Key for your wireless network, you will have to enter the Pass Phrase during the setup process.

How to set up automatically

To set up the wireless connection automatically, follow these steps:

1. Follow Steps 1 through 6 in the “How to set up using PBC (WPS)” above.

2. Press the ▼ button to select Internet Protocol Setup, and then press the ENTER ▼ button to select Auto, and then press the ENTER button.

button. Press the ▲or

Network Setup (PBC (WPS))

How to set up using PBC (WPS)

If your router has a PBC (WPS) button, follow these steps:

1. Connect your TV to your LAN as described in the

previous section.

2. Turn on your TV, press the MENU button on your remote, use the ▲or▼ button to select Setup, and then press the ENTER

3. Use the ▲or▼ button to select Network in the Setup menu, and then press the ENTER

4. On the Network screen, select Network Type.

5. Set Network Type to Wireless.

English

button.

English

04 Advanced Features

3. Press the ▲ button to go to Select a Network, and

A B C D E F G

H I J K L M N

O P Q R S T U

V W X Y Z

0~9

Security Key

0 entered

Number

Lower case

Delete Space

then press the ENTERE button. The Network function searches for available wireless networks. When done, it displays a list of the available networks.

4. In the list of networks, press the ▲or ▼button to select a network, and then press the ENTER

If the AP is set to Hidden (Invisible), you have

✎

to select Add Network and enter the correct Network Na me (SSID) and Security Key to establish the connection.

5. If the Security/PIN pop-up appears, go to Step 6. If the Network Connecting Screen appears, go to Step 10.

6. Press the ▲or ▼ button to select Security or PIN. For most home networks, you would select Security (for Security Key). The Security Screen appears.

button.

Select a network

n Move E Enter R Return

7. On the Security screen, enter your network’s Pass Phrase.

You should be able to find the Pass Phrase on

✎

one of the set up screens you used to set up your router or modem.

8. To enter the Pass Phrase, follow these general directions:

Press the number buttons on your remote to enter – numbers.

Use the direction buttons on your remote to move – from button to button on the Security Key screen.

Press the Red button to change case or display – symbols/characters.

To a enter letter or symbol, move to the letter or – symbol, and then press the ENTER

To delete the last letter or number you entered, – press the Green button on your remote.

9. When done, press the Blue button on your remote. The Network Connecting screen appears.

10. Wait until the connection conﬁrmation message is displayed, and then press the ENTER

Network Setup screen re-appears.

11. To test the connection, press the RETURN button to

select Network Test, and then press the ENTER button.

button.

button. The

Network Setup (Ad-Hoc)

You can connect to a mobile device without an access point through the “Samsung Wireless LAN Adapter” by using a peer to peer network.

This function is available when

✎

Wireless Link) is set to Off.

How to connect to new Ad-hoc

1. Follow Steps 1 through 6 in the “How to set up using

PBC (WPS)”. (P. 26)

2. Choose Select a network. A list of devices/networks

appears.

3. While in the device list, press the Blue button on the

remote.

The message

✎

connection with cellphone or PC. The existing network system may have limited functionality. Do you want to change the network connection? is displayed.

4. Input the generated Network Name (SSID) and Security Key into the device you want to connect.

How to connect an existing Ad-hoc device

1. Follow Steps 1 through 6 in the “How to set up using

PBC (WPS)”. (P. 26)

2. Choose Select a network. Then, the device list will be displayed.

3. Select the device you want in the Device list.

4. If security key was applied, input the security key.

If network does not operate normally, check

✎

the Network Name (SSID) and Security Key again. An incorrect Security Key may cause a malfunction.

Ad-hoc is a direct WI-Fi

SWL(Samsung

Network Setup (Manual)

If the other methods do not work, you need to enter the Network setting values manually.

Getting the Network Connection Values

To get the Network setting values on most Windows computers, follow these steps:

1. Right click the Network icon on the bottom right of the screen.

2. In the pop-up menu, click Status.

3. On the dialog that appears, click the Support tab.

4. On the Support tab, click the Details button. The

Network settings are displayed.

Advanced Features

How to set up manually

To enter the Network settings into your TV, follow these steps:

1. Follow Steps 1 through 6 in the “How to set up using

PBC (WPS)”. (P. 26)

2. Press the ▼ button to select Internet Protocol Setup, and then press ENTER button to select Manual, and then press ENTER button.

3. Press the ▼ button to go to the ﬁrst entry ﬁeld (IP Address).

4. Use the number buttons to enter numbers.

5. When done with each ﬁeld, use the ► button to move

successively to the next ﬁeld. You can also use the other arrow buttons to move up, down, and back.

6. Enter the IP Address, Subnet Mask, and Gateway values.

7. Press the ▲ or ▼ button to go to DNS.

8. Press the ▼ button to go to the ﬁrst DNS entry ﬁeld.

Enter the numbers as above.

9. When done, press the ▲ button to go to Select a Network. Select your network, and then press

ENTER

button.

10. Go to Step 4 in the "How to set up automatically" (P. 26), and follow the directions from that point on.

button. Press the ▲or ▼

Network Setup (SWL (Samsung Wireless Link))

This function lets you connect a Samsung device that supports the PBC (WPS) to your TV. You can connect devices to the TV even if a sharer is not connected to the TV.

✎

To use the must be connected to the wireless network.

✎

If a Samsung Wireless Lan Adapter is connected to the

USB 2 port, the network may not operate normally. We

recommend to connect to USB 1 (HDD) port.

✎

Only sharers using the 2.4 Ghz band are supported. Sharers using the 5 Ghz band are not supported.

Internet on the TV, the AP (access point)

SWL connect

You can directly connect a device that supports the PBC (WPS) to the TV.

✎

This function is available when

Wireless Link) is set to On.

SWL(Samsung

How to connect Samsung Wireless link

For the procedures to establish a connection, refer to the following:

1. Follow Steps 1 through 5 in the “How to set up using

PBC (WPS)”. (P. 26)

2. Select Samsung Wireless Link by using the ▼ button and press the ENTER

3. Select SWL connect by using the ▼ button and press the ENTER

4. If the “Press the PBC button on the PBC(WPS) supported device to connect within 120 seconds.”

message appears, press the PBC button on the device to connect.

5. If the device is connected properly to the TV after starting count on message box then message box will be disappeared automatically.

If Your TV Fails to Connect to the Internet

Your TV may not be able to connect to the Internet because your ISP has permanently registered the MAC address (a unique identifying number) of your PC or modem, which it then authenticates each time you connect to the Internet as a way of preventing unauthorized access. As your TV has a different MAC address, your ISP can not authenticate its MAC address, and your TV can not connect.

To resolve this problem, ask your ISP about the procedures required to connect devices other than a PC (such as your TV) to the Internet.

If your Internet service provider requires an ID or password to connect to the Internet, your TV may not be able to connect to the Internet. If this is the case, you must enter your ID or password when connecting to the Internet.

The internet connection may fail because of a ﬁrewall problem. If this is the case, contact your Internet service

provider. If you cannot connect to the Internet even after you have

followed the procedures of your Internet service provider, please contact Samsung Electronics.

For more information, refer to the wireless network

✎

setup manual of the device to be connected.

If the connection fails, please retry after 2 minutes.

✎

button.

button to turn it On.

English

04 Advanced Features

Media Play

CH LIST

MEDIA.P

P . SIZE

SUM

1. Turn on your TV.

2. Connect a USB device containing photo, music and/or movie ﬁ les to the

3. When USB is connected to the TV, popup window appears. Then you can select

You can play pictures, music and videos saved on your PC or on your TV through a network connection in the Media Play mode.

Enjoy photos, music and/or movie ﬁ les saved on a USB Mass Storage Class (MSC) device.

O m

→ ENTER

→ Application → Media Play

Connecting a USB Device ¦

USB 1 (HDD) or USB 2 jack on the side of the TV.

Media Play.

Connecting to the PC through network ¦

✎

If you want to use and users manual from “www.samsung.com.”

LAN

Media Play to play files saved on your PC over your TV, you should download “PC Share Manager”

MediaPlay

Videos

TV Side Panel

Change Device

View Devices E Enter R Return

TV Side Panel

USB Drive

1. For more information on how to conﬁ gure your network, refer to ‘Network Connection’.

2. Using a LAN cable, connect between the external modem and the PC onto which the Samsung PC Share Manager

Samsung

Wireless

External Modem

(ADSL/VDSL/Cable TV)

You are recommended to locate both TV and PC in same subnet. The ﬁ rst 3 parts of the subnet address of the TV and – the PC IP addresses should be the same and only the last part (the host address) should be changed. (e.g. IP Address:

123.456.789.**)

program will be installed.

You can connect the TV to the PC directly without connecting it through a Sharer (Router). –

LAN

Adapter

Wireless IP

sharer

LAN Cable

+ 66 hidden pages