Samsung LN40C550, LN46C550, LN37C550, LN32C550 User Manual [es]

Contact SAMSUNG WORLD-WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Contacte con SAMSUNG WORLD WIDE

Si desea formular alguna pregunta o comentario en relación con los productos de Samsung, comuníquese con el centro de atención al cliente de SAMSUNG.

Country

CANADA 1-800-SAMSUNG(726-7864) www.samsung.com MEXICO 01-800-SAMSUNG(726-7864) www.samsung.com U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com ARGENTINE 0800-333-3733 www.samsung.com

BRAZIL

CHILE 800-SAMSUNG(726-7864) www.samsung.com COLOMBIA 01-8000112112 www.samsung.com COSTA RICA 0-800-507-7267 www.samsung.com ECUADOR 1-800-10-7267 www.samsung.com EL SALVADOR 800-6225 www.samsung.com GUATEMALA 1-800-299-0013 www.samsung.com HONDURAS 800-7919267 www.samsung.com JAMAICA 1-800-234-7267 www.samsung.com NICARAGUA 00-1800-5077267 www.samsung.com PANAMA 800-7267 www.samsung.com PUERTO RICO 1-800-682-3180 www.samsung.com REP. DOMINICA 1-800-751-2676 www.samsung.com TRINIDAD & TOBAGO 1-800-SAMSUNG(726-7864) www.samsung.com VENEZUELA 0-800-100-5303 www.samsung.com

Customer Care Center 

0800-124-421 4004-0000

www.samsung.com

Web Site

LCD TV

user manual

IMPORTADO POR: SAMSUNG ELECTRONICS MÉXICO S.A. de C.V. AV. PRESIDENTE MASARIK #111 INT701 COL. CHAPULTEPEC MORALES C.P.11570 DELEGACION MIGUEL HIDALGO MEXICO. DISTRITO FEDERAL Tel: 01-55-5747-5100 / 01-800-726-7864

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Model Serial No.

BN68-02604C-01

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and speciﬁcations may be changed without notice.

Still image warning

Avoid displaying still images (such as jpeg picture ﬁles) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock or news bars at screen bottom etc.) on the screen. Constant displaying of still pictures can cause uneven wear of the screen phosphor, which will affect image quality. To reduce risk of this effect, please follow below recommendations:

Avoid displaying the same TV channel for long periods.• Always try to display any image on full screen, use TV set picture format menu for best possible match.• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout •

process. Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.•

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in ﬁre or a problem with the product due to an increase in the internal temperature of the product.

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

✎

If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.

The appearance may differ depending on the product.

✎

Installation with a stand. Installation with a wall-mount.

4inches

English

Contents

English

ENGLISH

POWER

CHLIST

P . MODE

P . SIZE

INFO

TO OLS

Getting Started

List of Features y ......................................................... 4

Accessories y .............................................................. 4

Installing the LCD TV Stand y ...................................... 4

Viewing the Control Panel y ......................................... 5

Viewing the Remote Control y ......................................6

Connecting to an Antenna y ........................................ 7

Plug & Play (Initial Setup) y ........................................... 7

Connections

Connecting to an AV Device y ...................................... 8

Connecting to an Audio Device y ................................. 9

Connecting to a PC y ..................................................9

Changing the Input source y ...................................... 11

Basic Features

How to Navigate Menus y .......................................... 11

Channel Menu y ........................................................ 12

Seeing Channels 12 Using Favorite Channels 12 Memorizing channels 12 Editing channels 13 Other Features 13

Picture Menu y .......................................................... 14

Changing the Preset Picture Mode 14 Adjusting picture settings 14 Economical Solutions 14 Setting up the TV with your PC 14 Changing the Picture Options 15

Sound Menu y ........................................................... 16

Changing the Preset Sound Mode 16 Adjusting sound settings 16 Sound Settings 16

Setup Menu y ............................................................ 17

Setting the Time 17 Using the Sleep Timer 18 Setting the On/Off Timer 18 Locking Programs 18 Other Features 20 Picture In Picture (PIP) 21

Support Menu y ......................................................... 21

Advanced Features

Network Connection y ............................................... 23

Connecting to a Wired Network 23 Connecting Wireless Network 25

Media Play y .............................................................. 28

Connecting a USB Device 28 Connecting to the PC through network 28 Screen Display 30 Playing Multiple Files 33 Media Play - Additional Functions 33

Anynet+ y ................................................................. 35

Setting Up Anynet+ 36 Switching between Anynet+ Devices 36 Recording 36 Listening through a Receiver 37 Troubleshooting for Anynet+ 37

AllShare y ..................................................................38

About AllShare 38 Setting Up AllShare 38

Other Information

Assembling the Cables y ........................................... 40

Anti-theft Kensington Lock y ...................................... 40

Installing the Wall Mount y ......................................... 40

Securing the TV to the Wall y ..................................... 42

Troubleshooting y ......................................................43

Speciﬁcations y ......................................................... 46

License 46

Index y ...................................................................... 47

Check the Symbol!

This function can be used by pressing the

TOOLS button on the remote control.

✎

Note :

Important information

Step by step guide :

Informs you how to access

the menu.

Getting Started

List of Features

Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed y without a cable box / STB (Set-Top-Box) satellite receiver.

Media Play y : Allows you to play music ﬁles, pictures, and movies saved on a USB device. (P. 28) AllShare y : Allows you to conﬁgure a mobile message server media render. (P. 38) Self Diagnosis y :You can check picture and sound operation. (P. 21)

Accessories

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

✎

The items' colors and shapes may vary depending on the models.

✎

Remote Control & Batteries (AAA x 2) y Owner’s Instructions y Warranty Card / Safety Guide / Quick Setup Guide y

(46inch TV)

Blanking Bracket y Cable Tie y

Holder-Ring (4ea) y

Installing the LCD TV Stand

Components

When installing the stand, use the provided components and parts.

A B

1 EA 1 EA

Stand Guide Stand Screws

Cleaning Cloth y Power Cord y

9EA (M4 X L12)

Top View

4EA

English

Rear

Front

1EA

01 Getting Started

English

Bottom View

Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.

✎

Make sure that at least two persons lift and move the LCD TV.

✎

Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to one

✎

side.

4EA

Viewing the Control Panel

The product color and shape may vary depending on the model.

✎

Power IndicatorRemote control sensor

Speakers

(Power)

Remote control sensor Aim the remote control towards this spot on the TV.

SOURCE

MENU Displays an on-screen menu, the OSD (on screen display), of your TV’s features.

Power Indicator Blinks and turns off when the power is on and lights up in standby mode.

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

Turns the TV on or off.

Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTERE button on the remote control.

Adjusts the volume. In the OSD, use the and ► buttons on the remote control.

Changes the channels. In the OSD, use the ▼ and ▲ buttons on the remote control.

buttons as you would use the ◄

buttons as you would use the

Getting Started

PRE-CH

VOL

MUTE

RETURN

CH LIST

EXIT

ABCD

MEDIA.P F AV . CH

P . MODE

S.MODE

SLEEP

P.SIZE

MTS

TOOLS

INFO

Viewing the Remote Control

This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel, Volume

✎

buttons.

Turns the TV on and off.

Displays and selects the available video

Press to directly access to channels.

Press to select additional channels (digital)

being broadcast by the same station. For

example, to select channel ‘54-3’, press

Displays the channel list on the screen.

Quickly select frequently used functions.

Selects the on-screen menu items and changes the values seen on the menu.

Use these buttons in Media Play and

‘54’, then press ‘-’ and ‘3’.

Returns to the previous menu.

(: controls recording on Samsung

recorders with the Anynet+ feature)

sources. (P. 11)

Adjusts the volume.

(P. 12)

Views Media Play.

(P. 28)

Anynet+ modes.

Turns the remote control light on and off. When on, the buttons become illuminated for a moment when pressed. (Using the remote control with this button set to off will reduce the battery usage time.)

Returns to the previous channel.

Cut off the sound temporarily.

Changes channels.

Displays the main on-screen menu.

Displays Favorite Channel Lists on the screen. (P. 12)

Press to display information on the TV screen. (P. 17)

Exit the menu.

Buttons used in the Channel list, Media Play menu, etc.

S.MODE: Selects the sound mode. (P. 16) SLEEP: Automatically shuts off the TV at a

preset time. (P. 18)

MTS: Press to choose stereo, mono or Separate

Audio Program (SAP broadcast). (P. 17)

P.MODE: Selects picture mode. (P. 14) P.SIZE: Choose the picture size. (P. 15) CC: Controls the caption decoder. (P. 20)

English

Installing batteries (Battery size: AAA)

NOTE

✎

Use the remote control within 23 feet from the TV.

Bright light may affect the performance of the remote

control. Avoid use when nearby fluorescent lights or neon signs.

The color and shape may vary depending on the model.

01 Getting Started

English

Connecting to an Antenna

POWER

CHLIST

INFO

When the TV is initially powered on, basic settings proceed automatically.

Connecting the power cord and antenna.

✎

VHF/UHF Antenna

Power Input

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in conﬁguring basic settings. Press the

POWERP button. Plug & Play is available only when the Input source is set to TV.

To return to the previous step, press the red button.

✎

Selecting a language

Selecting Store Demo

or Home Use

Selecting an antenna

Selecting a channel The channel search will start automatically.

Setting the Clock

Mode

Viewing the HD

Connection Guide. Enjoy your TV.

Press the ▲ or ▼ button, then press the ENTERE button. Select the desired OSD (On Screen Display) language.

Press the ◄ or ► button, then press the ENTERE button.

Select the y Home Use mode. Store Demo Mode is for retail environments.

To return the unit’s settings from y Store Demo to Home Use (standard): Press the volume button on the TV. When you see the volume in the OSD, press and hold MENU for 5 sec.

Press the ▲ or ▼ button, then press the ENTERE button. Select Air, Cable or Auto.

In ✎Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the ▲, ▼, ◄ or ► button, then press the ENTERE button.

For more information, refer to Channel → Auto Program. (P. 12)

Press the ✎ENTERE button at any time to interrupt the memorization process.

Set the Clock Mode automatically or manually.

If you select the ✎Auto, set the daylight saving time. Select the time zone where you live.

The connection method for the best HD screen quality is displayed.

Press the ENTERE button.

Cable

ANT OUT

If You Want to Reset This Feature...

O m

→ Setup → Plug & Play → ENTER

Setup

Plug & Play

Time Menu Language : English Caption : On Security Network General

PIP : Off

ConnectionsConnections

R-AUDIO-L

R PB Y

R-AUDIO-L

R PB Y

W Y

BGR

R-AUDIO-L

R PB Y

W W

BGRRWY

W W

BGRR

Connecting to an AV Device

Using an HDMI / DVI Cable: HD connection (up to 1080p)

We recommend using the HDMI connection for the best quality HD picture. Available devices: DVD, Blu-ray player, HD cable box, HD satellite receiver (STB).

Red White

BD/DVD player/

HD cable/Sat. box

HDMI OUT

Device

DVI OUT

AUDIO OUT

HDMI IN 1(DVI) ✎, 2, 3, 4 / PC/DVI AUDIO IN

When using an HDMI/DVI cable connection, you must use the xHDMI IN 1(DVI) jack for video. A DVD, Blu-ray player, HD cable box, HD STB satellite receiver, cable box, or STB satellite receiver may require a DVI-HDMI (DVI to HDMI) cable or DVI-HDMI (DVI to HDMI) adapter. The PC/DVI AUDIO IN jack is required for audio. If an external device such as a DVD / Blu-ray player / cable box / satellite receiver (Set-Top Box) supporting

HDMI versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound / annoying ﬂicker abnormal Color). If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you

suspect the version is older than 1.3, contact the provider of the device to conﬁrm the HDMI version and request an upgrade.

It is recommended you purchase an HDMI-certiﬁed cable. Otherwise, the screen may appear blank or a

connection error may occur.

Using a Component (up to 1080p), Using an Audio/Video Cable (480i only)

Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR

Blu-ray player

VCR

English

VIDEO OUT

AUDIO OUT

COMPONENT OUT

COMPONENT IN1 ✎, 2 / AV IN 1, 2:

When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).

For better picture quality,

✎

the Component connection is recommended over the A/V connection.

Yellow Red White Red Blue Green

English

02 Connections

Connecting to an Audio Device

R-AUDIO-L

R PB Y

W W

BGRR

Using an Optical (Digital) or Audio (Analog) Cable Connection

Available devices: Digital Audio System, Ampliﬁer, Home Theater

Red White

DIGITAL AUDIO OUT (OPTICAL)

✎

When a Digital Audio System is connected to the xDIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system.

5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.

When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack. When the

TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theater.

AUDIO OUT ✎: Connects to the audio input jacks on your amplifier/home theater.

When connecting, use the appropriate connector (sold separately).

When an audio amplifier is connected to the xAUDIO OUT jacks: Decrease the volume of the TV and adjust the volume level with the amplifier’s volume control.

Connecting to a PC

Using an HDMI/DVI Cable / a D-sub Cable

AUDIO IN

Digital audio system

OPTICAL

DVD

Home Theater

AUDIO OUT

DVI OUT

PC OUT

AUDIO OUT

Connections

Display Modes (D-Sub and HDMI/DVI Input)

Optimal resolution is 1920X1080@60Hz.

Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V)

IBM

MAC

VESA CVT

VESA DMT

VESA GTF

VESA DMT / DTV CEA 1920 x 1080p 67,500 60,000 148,500 +/+

NOTE

✎✎

For HDMI/DVI cable connection, you must use the xHDMI IN 1(DVI) jack. The interlace mode is not supported.

The set might operate abnormally if a non-standard video format is selected.

Separate and Composite modes are supported. SOG(Sync On Green) is not supported.

EX-LINK

640 x 350 31,469 70,086 25,175 +/720 x 400 31,469 70,087 28,322 -/+ 640 x 480 35,000 66,667 30,240 -/832 x 624 49,726 74,551 57,284 -/-

1152 x 870 68,681 75,062 100,000 -/-

720 x 576 35,910 59,950 32,750 -/+ 1152 x 864 53,783 59,959 81,750 -/+ 1280 x 720 56,456 74,777 95,750 -/+ 1280 x 960 75,231 74,857 130,000 -/+

640 x 480 31,469 59,940 25,175 -/-

640 x 480 37,861 72,809 31,500 -/-

640 x 480 37,500 75,000 31,500 -/-

800 x 600 37,879 60,317 40,000 +/+

800 x 600 48,077 72,188 50,000 +/+

800 x 600 46,875 75,000 49,500 +/+ 1024 x 768 48,363 60,004 65,000 -/1024 x 768 56,476 70,069 75,000 -/1024 x 768 60,023 75,029 78,750 +/+ 1152 x 864 67,500 75,000 108,000 +/+

1280 x 1024 63,981 60,020 108,000 +/+ 1280 x 1024 79,976 75,025 135,000 +/+

1280 x 800 49,702 59,810 83,500 -/+ 1280 x 800 62,795 74,934 106,500 -/+ 1280 x 960 60,000 60,000 108,000 +/+ 1280 x 720 45,000 60,000 74,250 +/+ 1360 x 768 47,712 60,015 85,500 +/+ 1440 x 900 55,935 59,887 106,500 -/+ 1440 x 900 70,635 74,984 136,750 -/+

1680 x 1050 65,290 59,954 146,250 -/+

1280 x 720 52,500 70,000 89,040 -/+

1280 x 1024 74,620 70,000 128,943 -/-

Connector for service only.

Input Cables (Sold Separately)

HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA

English

02 Connections

PRE-CH

TOOL

AV.CH

INFO

RETURN

HLI

EXIT

MEDIA.PABCD

Changing the Input source

CHLIST

P . SIZE

Source List

O m

ENTER

Use to select TV or an external input sources such as a DVD / Blu-ray player / cable box / STB satellite receiver.

TV / AV1 / AV2 / Component1 / ■ Component2 / PC / HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / USB

→ Input → Source List →

You can only choose external devices that

✎

are connected to the TV. In the Source List, connected inputs will be highlighted.

PC ✎ always stay activated.

Basic Features

Edit Name

O m

VCR / DVD / Cable STB / Satellite STB / PVR STB / ■ AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA:

Name the device connected to the input jacks to make your input source selection easier.

→ Input → Edit Name → ENTER

When a PC with a resolution of 1920 x 1080 @

✎

60Hz is connected to the HDMI IN 1(DVI) port, you should set to DVI PC mode under Edit Name.

When connecting an HDMI/DVI cable to the

✎

HDMI IN 1(DVI) port, you should set to DVI PC or

DVI Devices mode under Edit Name.

How to Navigate Menus

Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions.

1 MENU button: Displays the main on-screen menu. 2 ENTERE / Direction button: Move the cursor and

select an item. Conﬁrm the setting.

3 RETURN button: Returns to the previous menu. 4 EXIT button: Exits the on-screen menu.

How to Operate the OSD (On Screen Display)

The access step may differ depending on the selected menu.

▲ / ▼ Select an icon with the ▲ or ▼

ENTER

▲ / ▼

◄ / ►

ENTER

EXIT

The main menu options appear on the screen:

Picture, Sound, Channel, Setup, Input, Application, Support.

button. Press ENTERE to access the

sub-menu Select the desired submenu with

the ▲ or ▼ button. Adjust the value of an item with the

◄ or ► button. The adjustment in the OSD may differ depending on the selected menu.

Press ENTERE to conﬁ rm the selection. Press EXIT.

Basic Features

ABCD

POWER

FAV . CH

CHLIST

P . MODE

P . SIZE

MTS

INFO

SLEEP

CHLIST

Channel Menu

Seeing Channels ¦

Channel List

O m

Add, delete or set Favorite channels and use the program guide for digital broadcasts.

Select a channel in the All Channels, Added Channels, Favorite or Programmed screen by pressing the ▲ / ▼ buttons, and pressing the ENTERE button. Then you can watch

the selected channel.

Added Channels

Air A Antenna B Zoom C Select Page T Tools

■ All Channels: Shows all currently available

■ Added Channels: Shows all added channels.

■

■ Programmed: Shows all currently reserved programs.

Using the color buttons with the ✎Channel List

x x

number.

Select desired channels and press the Yellow button to set all the selected channels at the same time. The

T x (Tools): Displays the Channel List option menu.

(The Options menus may differ depending on the situation.)

Channel Status Display Icons

Icons Operations

* ) (

→ Channel → Channel List → ENTER

6 Air

6-1 ♥ TV #6

7 Air

8 Air 9 Air

9-1 ♥ TV #9

10 Air

10-1 ♥ TV #10 11-1 ♥ TV #11

channels.

Favorite: Shows all favorite channels.

Red (Antenna): Switches

Green (Zoom): Enlarges or shrinks a channel

Yellow (Select): Selects multiple channel lists.

mark appears to the left of the selected channels.

(Page): Move to next or previous page.

A channel selected. A channel set as a Favorite. A reserved program. A program currently being broadcast.

to Air or Cable.

Using Favorite Channels ¦

O m

Add to Favorite / Delete from Favorite

Set channels you watch frequently as

Favorites.

→ Channel → Channel List → ENTER

1. Select a channel and press the TOOLS

button.

2. Add or delete a channel using the Add to Favorite or Delete from Favorite menu

respectively.

6 Air

6-1 ♥ TV #6

Added Channels

Air A Antenna B Zoom C Select Page T Tools

7 Air

8 Air 9 Air

9-1 ♥ TV #9

10 Air

10-1 ♥ TV #10 11-1 ♥ TV #11

Delete Add to Favorite Timer Viewing Channel Name Edit Select All

Memorizing channels ¦

O m

Antenna (Air / Cable)

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).

→ Channel → ENTER

Auto Program

Air ■ : Air antenna signal. Cable ■ : Cable antenna signal. Auto ■ : Air and Cable antenna.

NOTE ✎

When selecting the Cable TV system: Selects the

cable system. STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point, the signal source has been selected.

After all the available channels are stored, it starts

to remove scrambled channels. The Auto program menu then reappears.

English

03 Basic Features

How to Stop Auto Programming

1. Press the ENTERE button.

2. A message will ask Stop Auto Program? Select Yes by

pressing the ◄ or ► button.

3. Press the ENTERE button.

Editing channels ¦

O m

Channel Name Edit

1. Select a channel and press the TOOLS button.

2. Edit the channel name using the Channel Name Edit

menu. Channel Name Edit ■ (analog channels only): Assign your

own channel name.

→ Channel → Channel List → ENTER

Other Features ¦

O m

→ Channel → ENTER

Clear Scrambled Channel

This function is used to ﬁlter out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes.

How to Stop Searching Scrambled Channels

1. Press the ENTERE button to select Stop.

2. Press the ◄ button to select Yes .

3. Press the ENTERE button.

This function is only available in ✎Cable mode.

Channel List

O m

Channel List Option Menu

Set each channel using the Channel List menu options (Add/ Delete, Timer Viewing, Select All/ Deselect All). Option

menu items may differ depending on the channel status.

1. Select a channel and press the TOOLS button.

2. Select a function and change its settings. Add / Delete ■ : Delete or add a channel to display the

channels you want.

→ Channel → Channel List → ENTER

NOTE

✎

All deleted channels will be shown on the xAll Channels menu.

A gray-colored channel indicates the channel

has been deleted. The xAdd menu only appears for deleted

channels. Delete a channel from the xAdded Channels or

Favorite menu in the same manner.

Timer Viewing ■ : You can set a desired channel to be displayed automatically at the set time; even when you are watching another channel. Set the current time ﬁrst to use this function. (P. 17)

1. Press the ◄ / ► /▲ / ▼ buttons to select the desired channel in Channel List.

2. Press the TOOLS button, then select Timer Viewing.

3. Scroll up or down to adjust the settings in the box,

or use the numeric buttons on your remote for entering the date and time.

If you selected ✎Once, Every Week or Every Day in Repeat, you can enter the date you want.

Select OK, then press the ENTERE button when done.

NOTE

✎

Only memorized channels can be reserved.

Reserved programs will be displayed in the

Programmed menu. When a digital channel is selected, press the x►

button to view the digital program.

Select All ■ : Select all the channels in the channel list. Deselect All ■ : Deselect all the selected channels.

You can only select ✎Deselect All when one or more channels are selected.

Programmed

(in Channel List) You can view, modify or delete a a show you have reserved

to watch.

1. Press the

2. Press the ◄ and ▼ button move to the Programmed

menu. Change Info ■ : Change a show you have reserved to

watch. Cancel Schedules ■ : Cancel a show you have reserved

to watch. Information ■ : Display a show you have reserved

to watch. (You can also change the reservation Information.)

Select All / Deselect All: ■ You can select or deselect all channels in the channel list.

ENTERE

button to select Channel List.

Fine Tune

(analog channels only) If the reception is clear, you do not have to ﬁne tune the

channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, ﬁne tune the channel manually.

Select y Fine Tune in the Channel menu. Fine tuned channels that have been saved are marked

✎

with an asterisk “*” on the right-hand side of the channel number in the channel banner.

To reset the fine-tuning, select ✎Reset.

Basic Features

CHLIST

P . MODE

P . SIZE

INFO

Picture Menu

Changing the Preset Picture Mode ¦

O m

Mode

Select your preferred picture type by pressing the P.MODE button.

Dynamic ■ : Suitable for a bright room. Standard ■ : Suitable for a normal

environment.

Natural ■ : Suitable for an eye comfortable display.

Movie ■ : Suitable for watching movies in a dark room.

→ Picture → Mode → ENTER

Natural ✎ is not available in PC mode.

Adjusting picture settings ¦

O m

→ Picture → Backlight → ENTER

Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)

Your television has several setting options for picture quality control.

NOTE

✎

When you make changes to xBacklight, Contrast, Brightness, Sharpness, Color or Tint (G/R), the OSD will be adjusted accordingly.

In PC mode, you can only make changes to

Backlight, Contrast and Brightness. Settings can be adjusted and stored for each

external device connected to the TV. Lowering picture brightness reduces power

consumption.

Economical Solutions ¦

ECO Solution

O m

Energy Saving (Off / Low / Medium / High / Picture ■ Off / Auto): This adjust the brightness of the TV in order to reduce power consumption. If you select Picture Off, the screen is turned off , but the sound remains on.

Press any button to turn on the screen again.

→ Picture → ECO Solution → ENTER

Eco Sensor (Off / On) ■ : To enhance your power savings; the picture settings will automatically adapt to the light in the room.

If you adjust the ✎Backlight, the Eco Sensor will be set to Off.

Min Backlight: When ECO sensor is On, the minimum screen brightness can be adjusted manually.

If ✎Eco Sensor is On, the display brightness may change (become slightly darker in most cases) depending on the surrounding light intensity.

No Signal Power Off (Off / 15 min. / 30 min. / 60 min.) ■ Sets how quickly the TV switches to standby mode, if no picture is being received.

Disabled when the PC is in power saving mode.

✎

Setting up the TV with your PC ¦

Set the input source to PC.

Auto Adjustment

O m

ENTER

Adjust frequency values/positions and ﬁne tune the settings automatically.

Not available when connecting through HDMI/DVI

✎

cable.

→Picture → Auto Adjustment →

Screen

Coarse / Fine ■ : Removes or reduces picture noise. If the

noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Finetune again. After the noise has been reduced, readjust the picture so that it is aligned to the center of screen.

Position ■ : Adjust the PC’s screen positioning if it does not ﬁt the TV screen. Press the ▲ or ▼ button to adjust the Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position.

Image Reset ■ : Resets the image to default settings.

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP) Depending on the version of Windows and the video card,

the actual screens on your PC will probably look different, but

the same basic set-up information will apply in most cases. (If not, contact your computer manufacturer or Samsung Dealer.)

1. Click on “Control Panel” on the Windows start menu.

2. Click on “Appearance and Themes” in the “Control

Panel” window and a display dialog-box will appear.

3. Click on “Display” and a display dialog box will appear.

English

03 Basic Features

CHLIST

P . SIZE

4. Navigate to the “Settings” tab on the display dialog-box.

The correct size setting (resolution) y [Optimum: 1920 X 1080 pixels]

If a vertical-frequency option exists on your display y settings dialog box, the correct value is ‘60’ or ‘60 Hz’. Otherwise, just click ‘OK’ and exit the dialog box.

Changing the Picture Options ¦

Advanced Settings

O m

ENTER

(available in Standard / Movie mode) Compared to previous models, new Samsung TVs have

more precise pictures.

In PC mode, you can only make changes to ✎Dynamic Contrast, Gamma and White Balance.

Black Tone : Off ►

Dynamic Contrast : Medium Shadow Detail : 0 Gamma : 0 RGB Only Mode : Off Color Space : Native White Balance

Bla ■ ck Tone (Off / Dark / Darker / Darkest): Select the black level to adjust the screen depth.

Dynamic Contrast (Off / Low / Medium / High) ■ : Adjust the screen contrast.

Shadow Detail ■ : Increase the brightness of dark images.

G ■ amma: Adjust the primary color intensity. RGB Only Mode (Off / Red / Green / Blue) ■ : Displays

the Red, Green and Blue color for making ﬁne adjustments to the hue and saturation.

Color Space (Auto / Native) ■ : Adjust the range of colors available to create the image.

White Balance ■ : Adjust the color temperature for a more natural picture.

R-Offset / G-Offset / B-Offset: Adjust each color's (red, green, blue) darkness.

R-Gain / G-Gain / B-Gain : Adjust each color's (red, green, blue) brightness.

Reset: Resets the White Balance to it's default settings.

Flesh Tone ■ : Emphasize pink "flesh tone". Edge Enhancement (Off / On) ■ : Emphasize object

boundaries.

→ Picture → Advanced Settings →

Advanced Settings

▼

U Move E Enter R Return

Disabled under PC mode.

✎

Picture Options

O m

ENTER

In PC mode, you can only make changes to the ✎Color Ton e, Size and Digital Noise Filter.

Color Tone : Normal ►

Size : 16:9 Digital Noise Filter : Auto MPEG Noise Filter : Auto

HDMI Black Level : Normal

Film Mode : Off Auto Protection Time : 2 hours

Color Tone (Cool / Normal / Warm1 / Warm2) ■

Size ■ : Your cable box/satellite receiver

may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.

16:9: Sets the picture to 16:9 wide mode. Zoom1: Use for moderate magniﬁcation. Zoom2: Use for a stronger magniﬁcation. Wide Fit: Enlarges the aspect ratio of the picture to ﬁt

the entire screen.

4:3: Sets the picture to basic (4:3) mode.

Screen Fit: Displays the full image without any cut-off

when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted.

NOTE

✎

After selecting xZoom1, Zoom2 or Wide Fit:

1. Press the ► button to select Position.

2. Press the ENTERE button.

3. Press the ▲ or ▼ button to move the picture up

4. Press the ENTERE button.

5. Press the ► button to select Reset.

6. Press the ENTERE button to reset the picture

→ Picture → Picture Options →

Picture Options

U Move E Enter R Return

Warm1 ✎ or Warm2 will be deactivated when the

picture mode is Dynamic. Settings can be adjusted and stored for each

✎

external device connected to an input on the TV.

Do not watch in 4:3 format for a long time. Traces

✎

of borders displayed on the left, right and center of the screen may cause image retention (screen burn) which are not covered by the warranty.

or down.

to its default position.

Basic Features

POWER

FAV . CH

CHLIST

MEDIA.P

P . MODE

S.MODE

P . SIZE

MTS

INFO

SLEEP

After selecting xScreen Fit in HDMI (1080i/1080p) or Component (1080i/1080p) mode, you may need to center the picture:

1. Press the ◄ or ► button to select Position.

2. Press the ENTERE button.

3. Press the ▲, ▼, ◄ or ► button to move the

picture.

4. Press the ENTERE button.

5. Press the ◄ or ► button to select Reset.

6. Press the ENTERE button.

HD (High Definition): 16:9 - 1080i/1080p (1920x1080),

720p (1280x720) Settings can be adjusted and stored for each

external device you have connected to an input on the TV.

Input Source Picture Size

ATV, AV, Component (480i, 480p) DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080p) PC 16:9, 4:3

Digital Noise Filter (Off / Low / Medium / High / Auto ■ / Auto Visualization): If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may

appear on the screen.

When the signal is weak, try other options until the

✎

best picture is displayed.

Auto Visualization: When changing analog channels, displays signal strength.

Only available for analog channels.

✎

When bar is green, you are receiving the best

✎

possible signal.

MPEG Noise Filter (Off / Low / Medium / High / ■ Auto): Reduces MPEG noise to provide an improved

picture quality.

Disabled under PC mode.

✎

HDMI Black Level (Normal / Low) ■ : Selects the black level on the screen to adjust the screen depth.

Available only in HDMI mode (RGB signals).

✎

Film Mode (Off / Auto1 / Auto2) ■ : Sets the TV to automatically sense and process ﬁlm signals from all sources and adjusts the picture for optimum quality.

Available in TV, AV, COMPONENT (480i / 1080i)

✎

and HDMI (480i / 1080i).

Auto Protection Time (2 hours / 4 hours / 8 hours ■ / 10 hours / Off): If the screen remains idle with a still

image for a certain period of time deﬁned by the user, the screen saver is activated to prevent the formation of ghost images on the screen.

16:9, Zoom1, Zoom2, 4:3

16:9, 4:3, Wide Fit, Screen Fit

Picture Reset (OK / Cancel)

Resets your current picture mode to its default settings.

Sound Menu

Changing the Preset Sound Mode ¦

O m

Mode

Standard ■ : Selects the normal sound

mode.

Music ■ : Emphasizes music over voices. Movie ■ : Provides the best sound for

movies. Clear Voice ■ : Emphasizes voices over

other sounds. Amplify ■ : Increase the intensity of high-frequency sound

to allow a better listening experience for the hearing impaired.

→ Sound → Mode → ENTER

Adjusting sound settings ¦

O m

→ Sound → Equalizer → ENTER

Equalizer

Adjusts the sound mode.

Balance L/R ■ : Adjusts the balance between the right and left speaker.

100Hz / 300Hz / 1KHz / 3KHz / 10KHz ■ (Bandwidth Adjustment): Adjusts the level of speciﬁc bandwidth frequencies.

Reset ■ : Resets the equalizer to its default settings.

Sound Settings ¦

O m

→ Sound → ENTER

Virtual Surround (Off / On)

(standard sound mode only) This function provides a virtual 5.1 channel surround sound experience through a pair of speakers or headphones using HRTF (Head Related Transfer Function) technology.

If ✎Speaker Select is set to External Speaker, Virtual Surround is disabled.

English

03 Basic Features

Dialog Clarity (Off / On)

CHLIST

P . MODE

P . SIZE

MTS

INFO

CHLIST

P . MODE

P . SIZE

MTS

INFO

(standard sound mode only) Dialog Clarity emphasizes voice while maintaining the

background sound level.

Preferred Language

(digital channels only) Digital-TV broadcasts are capable of

simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages).

You can only select a language among

✎

the ones being broadcasted.

SPDIF Output

SPDIF (Sony Philips Digital Interface) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player.

Audio Format ■ : During the reception of a digital TV broadcast, you can select the Digital Audio output (SPDIF) format from the options PCM or Dolby Digital.

By connecting to 5.1ch speakers in a dolby

✎

digital setup, maximize your interactive 3D sound experience.

Audio Delay ■ : Correct audio-video mismatch, when watching TV or video, and listening to digital audio output using an external device such as an AV receiver (0ms ~ 250ms).

Multi-Track Sound (MTS)

(analog channels only)

Mono ■ : Choose for channels that are broadcasting in mono or if you are having difﬁculty receiving a stereo signal.

Stereo ■ : Choose for channels that are broadcasting in stereo.

SAP ■ : Choose to listen to the Separate Audio Program, which is usually a foreign-language translation.

Depending on the particular program being broadcast,

✎

you can listen to Mono, Stereo or SAP.

Auto Volume (Off / Normal / Night)

To equalize the volume level on each channel, set to Normal.

Night ■ : This mode provides an improved sound

experience compared to Normal mode, making almost no noise. It is useful at night.

Speaker Select (External Speaker / TV Speaker)

A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker.

When ✎Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited.

When ✎Speaker Select is set to External Speaker, you should use these settings.

When ✎Speaker Select is set to TV Speaker, you should use these settings.

If there is no video signal, both speakers will be mute.

✎

TV Speaker: Off , External Speaker: On

TV Speaker: On , External Speaker: On

Sound Reset

Reset all sound settings to the factory defaults.

Setup Menu

Setting the Time ¦

O m

→ Setup → Time → ENTER

Time

The current time will appear every time you press the

✎

INFO button.

Clock ■ : Setting the clock is for using various timer

features of the TV.

If you disconnect the power cord, you have to set

✎

the clock again.

Clock Mode: Set up the current time manually or automatically.

Auto – : Set the current time automatically using the time from a digital channel.

The antenna must be connected in order to set

✎

the time automatically.

Manual – : Set the current time manually.

Depending on the broadcast station and signal,

✎

the auto time set up may not be correct. In this case, set the time manually.

Basic Features

POWER

CHLIST

P . MODE

P . SIZE

INFO

SLEEP

Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm.

Available only when ✎Clock Mode is set to Manual.

You can set the ✎Month, Day, Year, Hour and Minute directly by pressing the number buttons on the remote control.

DST (Daylight Saving Time) (Off / On): Switches the Daylight Saving Time function on or off.

This function is only available when the ✎Clock

Mode is set to Auto.

Time Zone: Select your time zone.

This function is only available when the ✎Clock

Mode is set to Auto.

Using the Sleep Timer ¦

O m

ENTER

Sleep Timer ■

shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).

→ Setup → Time → Sleep Timer →

To cancel the ✎Sleep Timer, select

Off.

: Automatically

Setting the On/Off Timer ¦

Channel (when the Source is set to TV): Select the

desired channel. Contents (when the Source is set to USB): Select a

folder in the USB device containing music or photo ﬁles to be played when the TV is turned on automatically.

If there is no music file on the USB device or the

✎

folder containing a music file is not selected, the Timer function does not operate correctly.

When there is only one photo file in the USB, the

✎

Slide Show will not play. A folder with too long of a name cannot be

✎

selected. Each USB you use is assigned its own folder.

✎

When using more than one of the same type of USB, make sure the folders assigned to each USB have different names.

Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you convenience. If you

select Manual, you can set up the day you want to activate the timer.

The

✎ c

Auto Power Off (available only when the TV is turned

✎

on by the Timer): The TV will be automatically turned off after 3 hours of being left idle to prevent overheating.

mark indicates the day is selected.

Locking Programs ¦

O m

→ Setup → Security → ENTER

O m

ENTER

Timer 1 / Timer 2 / Timer 3 ■ : Three different on / off

timer settings can be made. You must set the clock ﬁrst.

→ Setup → Time → Timer 1 →

Timer 1

On Time

▲

Inactivate 12 00 am

▼

Off Time

Inactivate 12 00 am

Volume Source Antenna Channel

10 TV Air 3

Repeat

Once

On Time / Off Time: Set the hour, minute, am/pm and activate / inactivate. (To activate the timer with the setting you’ve chosen, set to Activate.)

Volume: Set the desired volume level. Source: Select TV or USB content to be played when

the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV)

Antenna (when the Source is set to TV): Select Air or Cable.

Sun Mon Tue Wed Thu Fri Sat

L Move U Adjust E Enter R Return

Security

The PIN input screen appears, Enter your 4 digit PIN number.

V-Chip ■ : The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal identiﬁcation number) before any of the V-Chip restrictions are set up or changed.

NOTE

✎

V-Chip x is not available in HDMI, Component

or PC mode. The default PIN number of a new TV set is

“0-0-0-0”.

Allow all x: Press to unlock all TV ratings. Block all x: Press to lock all TV ratings.

V-Chip Lock (Off / On): You can block rated TV

Programs.

English

03 Basic Features

TV Parental Guidelines: You can block TV programs

depending on their rating. This function allows you to control what your children are watching.

TV-Y – : Young children / TV-Y7: Children 7 and over / TV-G: General audience / TV-PG: Parental guidance / TV-14: Viewers 14 and over / TV-MA: Mature

audience

ALL – : Lock all TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation / L: Adult Language / D: Sexually Suggestive Dialog

The V-Chip will automatically block certain

✎

categories dealing with more sensitive material. For example, if you block the T V-Y category, then T V-Y7 will automatically be blocked. Similarly, if you block the TV-G category, then all the categories in the young adult group will be blocked (TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (D, L, S, V) work similarly. So, if you block the L sub-rating in TV-PG, then the L sub-ratings in T V-14 and TV-MA will automatically be blocked.

MPAA Rating: You can block movies depending on their MPAA rating. The Motion Picture Association of America(MPAA) has implemented a rating system that provides parents or guardians with advanced information on which ﬁlms are appropriate for children.

G – : General audience (no restrictions). / PG: Parental guidance suggested. / PG-13: Parents strongly cautioned. / R: Restricted. Children under 17 should be accompanied by an adult. / NC-17: No children under age 17. / X: Adults only. / NR: Not rated.

The ✎V-Chip will automatically block any category that deals with more sensitive material. For example, if you block the PG-13 category, then R, NC-17 and X will automatically be blocked.

Canadian English: You can block TV programs depending on their Anglophone Canadian.

C – : Programming intended for children under age 8. / C8+: Programming generally considered acceptable

for children 8 years and over to watch on their own. /

G: General programming, suitable for all audiences. / PG: Parental Guidance. / 14+: Programming

contains themes or content which may not be suitable for viewers under the age of 14. / 18+: Adult programming.

The ✎V-Chip will automatically block any category that deals with more sensitive material. For example, if you block the G category, then

PG, 14+ and 18+ will automatically be blocked.

Canadian French: You can block TV programs

depending on their French Canadian rating.

G – : General / 8 ans+: Programming generally considered acceptable for children 8 years and over to watch on their own. / 13 ans+: Programming may not be suitable for children under the age of 13. / 16 ans+: Programming is not suitable for children under the age of 16. / 18 ans+: Programming restricted to adults.

The ✎V-Chip will automatically block any category that deals with more sensitive material. For example, if you block the 8 ans+ category, then 13 ans+, 16 ans+ and 18 ans+ will automatically be blocked also.

Downloadable U.S. Rating: Parental restriction information can be used while watching DTV channels.

NOTE

✎

If information is not downloaded from the

broadcasting station, the Downloadable U.S. rating menu is deactivated.

Parental restriction information is automatically

downloaded while watching DTV channels. It may take several seconds.

The xDownloadable U.S. rating menu is available for use after information is downloaded from the broadcasting station. However, depending on the information from the broadcasting station, it may not be available for use.

Parental restriction levels differ depending on

the broadcasting station. The default menu name and Downloadable US rating change depending on the downloaded information.

Even if you set the on-screen display to another

language, the Downloadable U.S. Rating menu will appear in English only.

The rating will automatically block certain

categories that deal with more sensitive material.

The rating titles (For example: Humor Level..etc)

and TV ratings (For example: DH, MH, H..etc) may differ depending on the broadcasting station.

Change PIN ■ : The Change PIN screen will appear. Choose any 4 digits for your PIN and enter them. As soon as the 4 digits are entered, the Conﬁrm New PIN screen appears. Re-enter the same 4 digits. When the Conﬁrm screen disappears, your PIN has been memorized.

Basic Features

CHLIST

MEDIA.P

P . MODE

P . SIZE

MTS

INFO

How to watch a restricted channel

If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear:

This channel is blocked by V-Chip. Please enter the PIN to unblock.

If you forget the PIN, press the remote-control

✎

buttons in the following sequence, which resets the pin to “0-0-0-0” : POWER (off) → MUTE → 8 → 2 → 4 → POWER (on)

Other Features ¦

O m

→ Setup → ENTER

Menu Language

Set the menu language.

1. Select Menu Language and press the ENTERE button.

2. Choose desired language and press the ENTERE

button.

Caption

(On-Screen Text Messages)

Caption (Off / On) ■ : You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen.

The Caption feature doesn’t

✎

work in Component, HDMI or PC modes.

Caption Mode ■ : You can select the desired caption mode.

The availability of captions depends on the

✎

program being broadcasted.

Default / CC1~CC4 / Text1~Text4: (analog channels only) The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to the TV. (Depending on the broadcasting signal, the Analog Caption function may or may not work with digital channels.)

Default / Service1~Service6 / CC1~CC4 / Text1~Text4: (digital channels only) The Digital Captions

function works with digital channels.

Digital Caption Options ■ : (digital channels only) Size: Options include Default, Small, Standard and

Large. The default is Standard. Font Style: Options include Default and Styles 0 to 7.

The default is Style 0. Foreground Color: Options include Default, White,

Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can change the color of the letter. The default is White.

Se rvice1~6 ✎ may not be available in digital caption

mode depending on the broadcast.

Background Color: Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can change the background color of the caption. The default is Black.

Foreground Opacity: This adjusts the opacity of text. Options include Default, Transparent, Translucent, Solid and Flashing.

Background Opacity: This adjusts the opacity of the caption background. Options include Default, Transparent, Translucent, Solid and Flashing.

Return to Default: This option sets each Size, Font Style, Foreground Color, Background Color, Foreground Opacity and Background Opacity to its default.

NOTE

✎

Digital Caption Options x are available only

when Default and Service1 ~ Service6 can be selected in Caption Mode.

The availability of captions depends on the

program being broadcasted. The xDefault setting follow the standards set by

the broadcaster. The Foreground and Background cannot be set

to have the same color. You cannot set both the xForeground Opacity

and the Background Opacity to Transparent.

Network (Network Type / Network Setup / Network Test )

For details on set up options, refer to the “Network Connection” instructions. (P.23~27)

General

Game Mode (Off / On) ■ : When connecting to a game

console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience selecting the game menu.

NOTE

✎

Precautions and limitations for game mode

To disconnect the game console and connect – another external device, set Game Mode to Off in the setup menu.

If you display the TV menu in – Game Mode, the screen shakes slightly.

Game Mode x is not available when the input source

is set to TV or PC. After connecting the game console, set xGame Mode

to On to prevent poor picture quality. If xGame Mode is On: Picture mode is set to

Standard and Sound mode is set to Movie. Selecting Reset after adjusting the equalizer returns

the equalizer to its default settings.

English

03 Basic Features

Menu Transparency (Bright / Dark) ■ : Set the

Transparency of the menu. Melody (Off / Low / Medium / High) ■ : Set so that a

melody plays when the TV is turned on or off.

NOTE

✎

Only available when the Input source is set to TV.

To turn the melody off, set Melody to Off. The Melody does not play.

When no sound is output from the TV because the –

MUTE button has been pressed.

When no sound is output from the TV because the – volume has been reduced to minimum with the

VOL – button.

When the TV is turned off by – Sleep Timer function.

Picture In Picture (PIP) ¦

PIP

O m

You can watch the TV tuner and one external video source simultaneously. PIP (Picture-in-Picture) does not function in the same mode.

NOTE

✎

For PIP sound, refer to the x Sound Select instructions.

If you turn the TV off while watching in PIP mode, the

PIP window will disappear. You may notice that the picture in the PIP window

becomes slightly unnatural when you use the main screen to view a game or karaoke.

While xV-Chip operation, the PIP function cannot be used.

PIP Settings

→ Setup → PIP → ENTER

Main picture Sub picture Component1,

Component2, HDMI1/DVI, HDMI2, HDMI3, HDMI4, PC

Support Menu

O m

→ Support → ENTER

Self Diagnosis

Picture Test ■ : Use to check for picture problems. If the

problem continues to occur, check the Color pattern. Yes: If the test pattern does not appear or there is

noise in the test pattern, select Yes. There may be a problem with the TV. Contact Samsung’s Call Center for assistance (1-800-SAMSUNG).

No: If the test pattern is properly displayed, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.

Sound Test ■ : Use the built-in melody sound to check for sound problems.

If you hear no sound from the TV’s speakers,

✎

before performing the sound test, make sure

Speaker Select is set to TV speaker in the Sound menu.

The melody will be heard during the test even if

✎

Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button.

Yes: If you can hear sound only from one speaker or not at all during the sound test, select Yes. There may be a problem with the TV. Contact Samsung’s Call Center for assistance (1-800-SAMSUNG).

No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.

Signal Information ■ (digital channels only): An HD channel’s reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength.

Troubleshooting ■ : If the TV seems to have a problem, refer to this description.

If none of these trouble shooting tips apply,

✎

contact the Samsung customer service center.

PIP (Off / On) ■ : Activate or deactivate the PIP function. Air/ Cable (Air / Cable) ■ : Select either Air or Cable as

the input source for the sub-screen.

Channel ■ : Select the channel for the sub-screen. Size ( ■

/ Ã): Select a size for the sub-picture.

Position ( ■

sub-picture. Sound Select (Main / Sub) ■ : You can choose the

desired sound (Main / Sub) in PIP mode.

/ – / — / œ): Select a position for the

Available when ✎PIP is set to On.

Basic Features

Software Upgrade

Software Upgrade can be performed can be performed by

network connection or downloading the latest ﬁrmware from “www.samsung.com,” to a USB memory device. Current Version - the software already installed in the TV.

Software is represented as ‘Year/Month/Day_Version’.

✎

Software Upgrade

Current Version 2009/11/29_000334

By USB ►

By Online

Alternative Software

Installing the Latest Version

By USB ■ : Insert a USB drive

containing the ﬁrmware upgrade ﬁle, downloaded from www.samsung.com, into the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are complete. The TV will be turned off and on automatically after completing the ﬁrmware upgrade. When software is upgraded, video and audio settings you have made will return to their default settings. We advise you to to write down your settings so that you can easily reset them after the upgrade.

----/--/--_-----

U Move E Enter R Return

TV Side Panel

TV Rear Panel

USB Drive

By Online ■ : Upgrade the software using the Internet.

First, configure your network. For detailed

✎

procedures on using the Network Setup, refer to the “Network Connection” instructions.

If the internet connection doesn’t operate properly,

✎

the connection may be broken. Please retry downloading. If the problem persists, download by USB and upgrade.

Alternative Software ■ (backup): Displays the Software version downloaded through By Online. During the software upgrading, When the Upgrade will discontinue from last step, this function be activated.

HD Connection Guide

Refer to this information when connecting external devices to the TV.

Contact Samsung

View this information when your TV does not work properly or when you want to upgrade the software. You can ﬁnd information regarding our call centers and how to download products and software.

English

Advanced Features

Network Connection

You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection.

Connecting to a Wired Network ¦

You can attach your TV to your LAN using cable in three ways:

You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat y 5 cable. See the diagram below.

04 Advanced Features

The Modem Port on the Wall

You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected y to an external modem. Use Cat 5 cable for the connection. See the diagram below.

The Modem Port on the Wall

Modem Cable

Depending on how your network is conﬁgured, you may be able to attach your TV to your LAN by connecting the LAN y port on the back of your TV directly to a network wall outlet using a Cat 5 cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in your house.

The Modem Port on the Wall

External Modem

(ADSL / VDSL / Cable TV)

External Modem

(ADSL / VDSL / Cable TV)

(having DHCP server)

LAN Cable

LAN CableModem Cable

IP Sharer

LAN Cable

TV Rear Panel

LAN Cable

If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you don’t have to enter them manually. Most home networks are Dynamic Networks. Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP). If you have a Windows computer, you can also get these values through your computer.

You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that

✎

support DHCP also let you use Static IP addresses.

English

Advanced Features

Network Setup (Auto)

Use the Automatic Network Setup when connecting your TV to a network that supports DHCP. To set up your TV’s cable network connection automatically, follow these steps:

How to set up automatically

1. Connect your TV to your LAN as described in the

previous section.

2. Turn on your TV, press the MENU button on your remote, use the ▲or▼ button to select Setup, and then press the ENTERE button.

3. Use the ▲or▼ button to select Network in the Setup menu, and then press the ENTERE button. The Network screen appears.

Network Type : Wired ►

Network Setup

Network test

4. On the Network screen, select Network Type.

5. Set Network Type to Wired.

6. Select Network Setup. The Network Setup screen

appears.

Network

U Move E Enter R Return

Network Setup (Manual)

Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address.

Getting the Network Connection Values

To get the Network connection values on most Windows computers, follow these steps:

1. Right click the Network icon on the bottom right of the

screen.

2. In the pop-up menu that appears, click Status.

3. On the dialog that appears, click the Support tab.

4. On the Support Tab, click the Details button. The

Network connection values are displayed.

How to set up manually

To set up your TV’s cable network connection manually, follow these steps:

1. Follow Steps 1 through 6 in the “How to set up

automatically” procedure.

2. Set Internet Protocol Setup to Manual.

3. Press the ▼ button on your remote to go to the ﬁrst

entry ﬁeld.

4. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use the number buttons on your

remote to enter numbers and the arrow buttons to move from one entry ﬁeld to another.

5. When done, press the RETURN button on your remote.

6. Select Network Test to check the Internet connectivity.

Network Setup

Internet Protocol Setup : Auto ►

IP Address : Subnet Mask : Gateway :

DNS : Auto

DNS Server :

7. Set Internet Protocol Setup to Auto.

8. Auto acquires and enters the needed Internet values

automatically.

9. Wait two minutes, and then press the RETURN button

on your remote.

10. If the Network Function has not acquired the network connection values, go to the directions for Manual.

English

U Move E Enter R Return

English

04 Advanced Features

Connecting Wireless Network ¦

To connect your TV to your network wirelessly, you need a wireless router or modem and a Samsung Wireless LAN Adapter (WIS09ABGN), which you connect to your TV’s back or side panel USB jack. See the illustration below.

TV Side Panel

The LAN Port on

the Wall

LAN Cable

Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts. com. Samsung’s Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsung recommends using IEEE 802.11N. When you play video over a IEEE 802.11B/G connection, the video may not play smoothly.

✎

NOTE

You must use the “Samsung Wireless LAN Adapter” (WIS09ABGN) to use a wireless network.

Samsung’s Wireless LAN adapter is sold separately. The WIS09ABGN Wireless LAN adapter is offered by select

retailers, Ecommerce sites and Samsungparts.com. To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports

DHCP, your TV can use a DHCP or static IP address to connect to the wireless network. Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer

is currently being used by another device nearby, this will result in interference and communication failure. If you apply a security system other than the systems listed blow, it will not work with the TV.

If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or

TKIPAES (WPS2Mixed) for your AP, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications.

If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button

Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode.

Keep the Samsung Wireless LAN Adapter at a distance from the TV. If you watch the TV with the Adapter connected

nearby, images may appear corrupted for some channels. If your router, modem, or device isn’t, it may not connect to the TV via the “Samsung Wireless LAN Adapter.”

Connection Methods x: You can setup the wireless network connection four ways.

PBC (WPS)

–

Auto Setup (Using the Auto Network Search function)

–

Manual Setup

–

Ad-Hoc

–

All of Samsung Wireless LAN Adapter shoud be connected directly to the TV's USB port. USB HUB are not

supported.

Wireless IP sharer

Samsung Wireless

LAN Adapter

TV Rear Panel

Advanced Features

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

0~9

Security Key

0 entered

Number

Lower case

Delete Space

Network Setup (PBC (WPS))

How to set up using PBC (WPS)

If your router has a PBC (WPS) button, follow these steps:

1. Connect your TV to your LAN as described in the previous section.

2. Turn on your TV, press the MENU button on your remote, use the ▲or▼ button to select Setup, and then press the ENTERE button.

3. Use the ▲or▼ button to select Network in the Setup menu, and then press the ENTERE button.

4. On the Network screen, select Network Type.

5. Set Network Type to Wireless.

6. Select Network Setup. The Network Setup screen appears.

Select a network : Not Selected ►

Internet Protocol Setup : Auto

IP Address : Subnet Mask : Gateway :

DNS : Auto DNS Server :

7. Press the Red button on your remote.

8. Press the PBC (WPS) button on your router within 2 minutes. Your TV player automatically acquires all the network setting values it needs and connects to your network.

9. After the network connection is set up, press the

RETURN button to exit the Network Setup screen.

Network Setup (Auto)

Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a speciﬁed length you were asked to enter when you set up security for your wireless network. If you use this method of setting up the network connection, and have a Security Key for your wireless network, you will have to enter the Pass Phrase during the setup process.

How to set up automatically

To set up the wireless connection automatically, follow these steps:

1. Follow Steps 1 through 6 in the “How to set up PBC (WPS)” above.

2. Press the ▼ button to select Internet Protocol Setup, and then press the ENTERE button. Press the ▲ or ▼ button to select Auto, and then press the ENTERE button.

English

Network Setup

PBC(WPS) U Move E Enter R Return

3. Press the ▲ button to go to Select a Network, and then press the ENTERE button. The Network function searches for available wireless networks. When done, it displays a list of the available networks.

4. In the list of networks, press the ▲ or ▼ button to select a network, and then press the ENTERE button.

If the AP is set to Hidden (Invisible), you have

✎

to select Add Network and enter the correct Network Na me (SSID) and Security Key to establish the connection.

5. If the Security/PIN pop-up appears, go to Step 6. If the Network Connecting Screen appears, go to Step 10.

6. Press the ▲ or ▼ button to select Security or PIN. For most home networks, you would select Security (for Security Key). The Security Screen appears.

Network Setup

n Move E Enter R Return

7. On the Security screen, enter your network’s Pass Phrase.

You should be able to find the Pass Phrase on

✎

one of the set up screens you used to set up your router or modem.

8. To enter the Pass Phrase, follow these general directions:

Press the number buttons on your remote to enter – numbers.

Use the direction buttons on your remote to move – from button to button on the Security Key screen.

Press the Red button to change case or display – symbols/characters.

To a enter letter or symbol, move to the letter or – symbol, and then press the ENTERE button.

To delete the last letter or number you entered, – press the Green button on your remote.

9. When done, press the Blue button on your remote. The Network Connecting screen appears.

10. Wait until the connection conﬁrmation message is displayed, and then press the ENTERE button. The

Network Setup screen re-appears.

11. To test the connection, press the RETURN button to

select Network Test, and then press the ENTERE button.

English

04 Advanced Features

Network Setup (Ad-Hoc)

You can connect to a mobile device without an access point through the “Samsung Wireless LAN Adapter” by using a peer to peer network.

How to connect to new Ad-hoc

1. Follow Steps 1 through 6 in the “How to set up using

PBC (WPS)”. (P. 26)

2. Choose Select a network. A list of devices/networks

appears.

3. While in the device list, press the Blue button on the

remote.

The message ✎Ad-hoc is a direct WI-Fi

connection with cellphone or PC. The existing network system may have limited functionality. Do you want to change the network connection? is displayed.

4. Input the generated Network Name (SSID) and Security Key into the device you want to connect.

How to connect an existing Ad-hoc device

1. Follow Steps 1 through 6 in the “How to set up using

PBC (WPS)”. (P. 26)

2. Choose Select a network. Then, the device list will be displayed.

3. Select the device you want in the Device list.

4. If security key was applied, input the security key.

If network doesn’t operate normally, check

✎

the Network Name (SSID) and Security Key again. An incorrect Security Key may cause a malfunction.

Network Setup (Manual)

If the other methods do not work, you need to enter the Network setting values manually.

Getting the Network Connection Values

To get the Network setting values on most Windows computers, follow these steps:

1. Right click the Network icon on the bottom right of the screen.

2. In the pop-up menu, click Status.

3. On the dialog that appears, click the Support tab.

4. On the Support tab, click the Details button. The

Network settings are displayed.

How to set up manually

To enter the Network settings into your TV, follow these steps:

1. Follow Steps 1 through 6 in the “How to set up using

PBC (WPS)”. (P. 26)

2. Press the ▼ button to select Internet Protocol Setup, and then press ENTERE button. Press the ▲ or ▼ button to select Manual, and then press ENTER button.

3. Press the ▼ button to go to the ﬁrst entry ﬁeld (IP Address).

4. Use the number buttons to enter numbers.

5. When done with each ﬁeld, use the ► button to move

successively to the next ﬁeld. You can also use the other arrow buttons to move up, down, and back.

6. Enter the IP Address, Subnet Mask, and Gateway values.

7. Press the ▲ or ▼ button to go to DNS.

8. Press the ▼ button to go to the ﬁrst DNS entry ﬁeld.

Enter the numbers as above.

9. When done, press the ▲ button to go to Select a Network. Select your network, and then press

ENTERE button.

10. Go to Step 4 in the "How to set up automatically" (P. 26),

and follow the directions from that point on.

If Your TV Fails to Connect to the Internet

Your TV may not be able to connect to the Internet because your ISP has permanently registered the MAC address (a unique identifying number) of your PC or modem, which it then authenticates each time you connect to the Internet as a way of preventing unauthorized access. As your TV has a different MAC address, your ISP can not authenticate its MAC address, and your TV can not connect.

To resolve this problem, ask your ISP about the procedures required to connect devices other than a PC (such as your TV) to the Internet.

If your Internet service provider requires an ID or assword to connect to the Internet, your TV may not be able to connect to the Internet. If this is the case, you must enter your ID or password when connecting to the Internet.

The internet connection may fail because of a ﬁrewall problem. If this is the case, contact your Internet service

provider. If you cannot connect to the Internet even after you have

followed the procedures of your Internet service provider, please contact Samsung Electronics at 1-800-SAMSUNG.

Advanced Features

CHLIST

MEDIA.P

P . SIZE

SUM

Media Play

Enjoy photos, music and/or movie ﬁles saved on a USB Mass Storage Class (MSC) device and/or your PC.

O m

(USB) → ENTER

→ Application → Media Play

MediaPlay

Videos

Change Device

View Devices E Enter R Return

Connecting a USB Device ¦

1. Turn on your TV.

2. Connect a USB device containing photo, music and/or movie ﬁles to the

USB 1 (HDD) or USB 2 jack on the side or rear of the TV.

3. When USB is connected to the TV, popup window appears. Then you can select Media Play.

USB Drive

TV Side Panel

TV Rear Panel

Connecting to the PC through network ¦

You can play pictures, music and videos saved on your PC or on your TV through a network connection in the Media Play mode.

I f you want to use ✎Media Play to play files saved on your PC over your TV, you should download “PC Share Manager” and users manual from “www.samsung.com.”

Samsung

Wireless

LAN

Adapter

TV Side Panel

TV Rear Panel

Wireless IP

sharer

LAN Cable

LAN

1. For more information on how to conﬁgure your network, refer to ‘Network Connection’.

You are recommended to locate both TV and PC in same subnet. The ﬁrst 3 parts of the subnet address of the TV and – the PC IP addresses should be the same and only the last part (the host address) should be changed. (e.g. IP Address:

123.456.789.**)

2. Using a LAN cable, connect between the external modem and the PC onto which the Samsung PC Share Manager program will be installed.

You can connect the TV to the PC directly without connecting it through a Sharer (Router). –

English

External Modem

(ADSL/VDSL/Cable TV)

English

04 Advanced Features

Functions that are not supported when connecting to a PC through a network:

✎

The xBackground Music and Background Music Setting functions. Sorting files by preference in the xPhoto, Music, and Movie folders. The x

(REW) or µ (FF) button while a movie is playing.

The Divx DRM, Multi-audio, embedded caption does not supported.

✎

Samsung PC Share manager should be permitted by the firewall program on your PC.

✎

When you use ✎Media Play mode through a network connection, According to functions of the provided server:

The sorting method may vary.

The scene search function may not be supported.

The xPlay Continuously function, which resumes playing of a video, may not be supported.

The – Play Continuously function does not support multiple users. (It will have only memorized the point where the most recent user stopped playing.)

The x

(REW), µ (FF) or  (Pause) buttons may not work depending on the content information.

If you experience any file stuttering issue while playing a video over a wireless network, we recommend using a wired

✎

network. It might not work properly with unlicensed multimedia files.

✎

Need-to-Know List before using ✎Media Play

MTP (Media Transfer Protocol) is not supported.

The file system supports FAT16, FAT32 and NTFS.

Certain types of USB Digital camera and audio devices may not be compatible with this TV.

Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only

Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not supported). Devices should be connected directly to the TV’s USB port.

Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.

SAMSUNG is not responsible for any data file damage or data loss. Connect a USB HDD to the dedicated port, xUSB 1 (HDD) port. Do not disconnect the USB device while it is loading.

The higher the resolution of the image, the longer it takes to display on the screen.

The maximum supported JPEG resolution is 15360X8640 pixels.

For unsupported or corrupted files, the “Not Supported File Format” message is displayed.

If the files are sorted by Basic View, up to 1000 files can be displayed in each folder.

MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management

(DRM) is a technology that supports the creation, distribution and management of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements.

If more than 2 PTP devices are connected, you can only use one at a time.

If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high

power (more than 500mA or 5V) may not be supported. If an over-power warning message is displayed while you are connecting or using a USB device, the device may not

be recognized or may malfunction. If the TV has been no input during time set in xAuto Protection Time, the Screensaver will run. The power-saving mode of some external hard disk drives may be released automatically when connected to the TV.

If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.

If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is

not played, connect the USB device to the PC, format the device and check the connection. If a file deleted from the PC is still found when Media Play is run, use the “Empty the Recycle Bin” function on the PC

to permanently delete the file.

+ 65 hidden pages