SAMSUNG LN40B500P3F User Manual

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Comment contacter Samsung dans le monde

Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung.

Comuníquese con SAMSUNG WORLDWIDE

Si desea formular alguna pregunta o comentario en relación con los productos de Samsung, comuníquese con el centro de atención al cliente de SAMSUNG.

Country Customer Care Center

CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca

U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com/us

Web Site Address

Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada

Samsung Electronique Canada Inc., Service à la Clientèle 55 Standish Court Mississauga, Ontario L5R 4B2 Canada

Samsung Electronics America, Inc. 105 Challenger Road Ridgefield Park, NJ 07660-0511

LCD TV

user manual

BN68-01883Q-00

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Model Serial No.

Important Warranty Information Regarding Television Format Viewing

❑

See the warranty card for more information on warranty terms.

Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to

ll the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images

on screen, such as the dark sidebars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week.

Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of LCD Displays that leave subtle, but permanent burned-in ghost images in the LCD picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars.

On LCD models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format selection

and use, as well as burned-in images, are not covered by your Samsung limited warranty.

U.S.A Only

●

The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. In particular, this product is licensed under the following US patents: 5,991,715, 5,740,317, 4,972,484, 5,214,678, 5,323,396, 5,539,829, 5,606,618, 5,530,655, 5,777,992, 6,289,308, 5,610,985, 5,481,643, 5,544,247, 5,960,037, 6,023,490, 5,878,080, and under US Published Patent Application No. 2001-44713-A1.

This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for commercial use. The license does not cover any product unit other than this product unit and the license does not extend to any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with

this product unit. The license only covers the use of this product unit to encode and/or decode audio les conforming to the

ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.

Other countries

●

The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for commercial use. The license does not cover any product unit other than this product unit and the license does not extend to any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with

this product unit. The license only covers the use of this product unit to encode and/or decode audio les conforming to the

ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.

SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT

●

Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and

in Canada on SAMSUNG products purchased in the United States, for the warranty period originally specied, and to the

Original Purchaser only. The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this

Statement, the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service Center is the responsibility of the purchaser.

Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use of the product.

Excluded, but not limited to, are any originally specied provisions for, in-home or on-site services, minimum or maximum

repair times, exchanges or replacements, accessories, options, upgrades, or consumables. For the location of a SAMSUNG Authorized Service Center, please call toll-free:

In the United States : 1-800-SAMSUNG (1-800-726-7864)

In Canada : 1-800-SAMSUNG

Precautions When Displaying a Still Image

❑

A still image may cause permanent damage to the TV screen

Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image

●

retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

●

Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left,

right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.

CONTENTS

English

GENERAL INFORMATION

List of Features .....................................................................2

■

Accessories ..........................................................................2

■

Viewing the Control Panel ....................................................3

■

Viewing the Connection Panel ..............................................4

■

Remote Control ....................................................................6

■

Installing Batteries in the Remote Control ............................6

■

CONNECTIONS

■

Connecting VHF and UHF Antennas ....................................7

■

Connecting Cable TV ...........................................................7

■

Connecting a DVD / Blu-ray player / Cable Box / Satellite

receiver (Set-Top Box) via HDMI ..........................................8

■

Connecting a DVD / Blu-ray player / Cable Box / Satellite

receiver (Set-Top Box) via DVI .............................................9

■

Connecting a DVD / Blu-ray player / Cable Box / Satellite

receiver (Set-Top Box) via Component cables .....................9

Connecting a VCR ..............................................................10

■

Connecting a Digital Audio System ....................................10

■

Connecting a Camcorder....................................................11

■

Connecting a PC ................................................................12

■

OPERATION

■

Viewing the menus .............................................................13

■

Plug & Play Feature............................................................14

CHANNEL CONTROL

■

Conguring the Channel Menu ...........................................15

■

Managing Channels............................................................15

PICTURE CONTROL

■

Conguring the Picture Menu .............................................17

■

Using Your TV as a Computer (PC) Display .......................19

■

Setting up the TV with your PC ..........................................20

SOUND CONTROL

Conguring the Sound Menu ..............................................21

■

SETUP

Conguring the Setup Menu ...............................................22

■

INPUT / SUPPORT

Conguring the Input Menu ................................................26

■

Conguring the Support Menu............................................26

■

ANYNET

■

Connecting Anynet+ Devices .............................................27

Setting Up Anynet

Switching between Anynet+ Devices ..................................29

Recording ...........................................................................30

Listening through a Receiver (Home theater).....................30

Troubleshooting for Anynet

+ .............................................................

+ ...............................................

APPENDIX

■

Troubleshooting ..................................................................32

■

Installing the Stand .............................................................35

■

Disconnecting the Stand.....................................................35

■

Wall Mount Kit Specications (VESA) ................................36

■

Using the Anti-Theft Kensington Lock ................................37

■

Securing the Installation Space ..........................................37

■

Securing the TV to the Wall ................................................38

■

Specications .....................................................................39

■

Dimensions .........................................................................40

License

❑

Symbol

❑

TruSurround HD, SRS and Symbol are trademarks of SRS Labs, Inc. TruSurround HD technology is incorporated under license from SRS Labs, Inc.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

N O T

Note One-Touch Button TOOLS Button

English - 1

GENERAL INFORMATION

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

Product design and specications may be changed without notice in order to enhance product performance.

List of Features

Adjustable picture settings that can be stored in the TV’s memory.

●

Automatic timer to turn the TV on and off.

●

A special sleep timer.

●

Excellent Digital Interface & Networking :

●

With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Cable Box/Satellite receiver (Set-Top

●

Box) needed. HDMI/DVI connection of your PC to this TV.

●

Excellent Picture Quality

●

SRS TruSurround HD provides a virtual surround system.

●

Accessories

Remote Control (BN59-00856A) &

Batteries (AAA X 2)

Cover-Bottom

(LN40B500 : BN63-05330A) (LN46B500 : BN63-05332A)

Warranty Card /

Safety Guide Manual

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

The items color and shape may vary depending on the model.

Power Cord

(3903-00467)

Screw (M4 X L16)

(6002-001294)

Owner’s Instructions

TV-Holder & Screw (M4 X L16)

(BN96-10788A)

Cleaning Cloth

(BN63-01798B)

English - 2

English - 3

Viewing the Control Panel

6 876

The product color and shape may vary depending on the model.

You can use a button by pressing the side panel buttons.

SOURCEE: Toggles between all the available input sources. In the on-screen menu, use this button as you use the

ENTERE button on the remote control.

MENU: Press to see an on-screen menu of your TV’s features.

3 y

◄ and ► buttons on the remote control.

4 Z

on the remote control.

5 P 6

SPEAKERS

REMOTE CONTROL SENSOR: Aim the remote control towards this spot on the TV.

POWER INDICATOR: Blinks and turns off when the power is on and lights up in stand-by mode.

: Press to increase or decrease the volume. In the on-screen menu, use the

: Press to change channels. In the on-screen menu, use the

(POWER): Press to turn the TV on and off.

buttons as you would use the ▼ and ▲ buttons

buttons as you would use the

Viewing the Connection Panel

1 2 3 4 5

[TV Rear Panel]

The product color and shape may vary depending on the model.

DIGITAL AUDIO OUT (OPTICAL)

Connects to a Digital Audio component such as a Home theater receiver.

–

SERVICE

–

Connector for service only.

ANT IN

Connects to an antenna or cable TV system.

–

PC / DVI AUDIO IN

Connect to the audio output jack on your PC.

–

DVI audio outputs for external devices.

–

HDMI IN 1(DVI), 2

Connects to the HDMI jack of a device with an HDMI output.

–

No additional Audio connection is needed for an HDMI to HDMI connection.

What is HDMI?

HDMI(High-Denition Multimedia Interface), is an interface that enables the transmission of digital audio and video

●

signals using a single cable. The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP

●

(High Bandwidth Digital Copy Protection) coding feature installed. Use the HDMI IN 1(DVI) jack for DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI

adapter(DVI to HDMI) for video connection and the PC / DVI AUDIO IN jacks for audio. When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.

English - 4

English - 5

PC IN

Connect to the video output jack on your PC.

–

If your PC supports an HDMI connection, you can connect this to the HDMI IN 1(DVI), 2 terminal.

If your PC supports a DVI connection, you can connect this to the HDMI IN 1(DVI) terminal.

COMPONENT IN / AV IN

–

Connects Component video / audio.

–

The COMPONENT IN / AV IN jack is also used as the AV IN jack.

Connect the video cable to the COMPONENT IN / AV IN [Y/VIDEO] jack and the audio cable to the COMPONENT IN / AV IN [R-AUDIO-L] jacks.

POWER INPUT

–

Connects the supplied power cord.

KENSINGTON LOCK

–

The Kensington Lock (optional) is a device used to physically x the system when used in a public place. If you want to use a locking device, contact the dealer where you purchased the TV.

The location of the Kensington Lock may be different depending on its model.

^ &

* (

)

c d e

3 4

Remote Control

You can use the remote control up to a distance of about 23 feet from the TV.

The performance of the remote control may be affected by bright light.

The product color and shape may vary depending on the model.

POWER: Turns the TV on and

off.

NUMERIC BUTTONS: Press to

change the channel.

_: Press to select additional

channels (digital) being broadcast by the same station. For example, to select channel ‘54-3’, press ‘54’, then press _ and ‘3’.

MUTE M: Press to temporarily

cut off the sound.

5 y

decrease the volume.

CH LIST: Used to display

Channel Lists on the screen.

TOOLS: Use to quickly select

frequently used functions.

INFO: Press to display

information on the TV screen.

COLOR BUTTONS: Use these

buttons in the Channel list menus etc.

S.MODE: Press to select the

sound mode.

P.MODE: Press to select the

picture mode.

Use these buttons in the

Anynet+ modes. (∏: This

remote can be used to control recording on Samsung recorders with the Anynet+ feature)

: Press to increase or

TV: Selects the TV mode directly.

PRE-CH: Enables you to return

to the previous channel you were watching.

% z

channels.

SOURCE: Press to display

and select the available video sources.

FAV.CH: Press to switch to your

favorite channels.

MENU: Displays the main on-

screen menu.

(

RETURN: Returns to the

previous menu.

)

 UP▲/DOWN▼/LEFT◄/

RIGHT►/ENTERE: Use to

select on-screen menu items and change menu values.

EXIT: Press to exit the menu.

P.SIZE: Picture size selection.

SRS: Selects SRS TruSurround

HD mode.

CC: Controls the caption

decoder.

MTS: Press to choose stereo,

mono or Separate Audio Program (SAP broadcast).

: Press to change

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the gure.

2. Install two AAA size batteries.

Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside the

compartment.

. Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the

remote control for a long time. (Assuming typical TV usage, the batteries should last for about one year.)

If the remote control doesn’t work, check the following:

Is the TV power on?

●

Are the plus and minus ends of the batteries reversed?

●

Are the batteries drained?

●

Is there a power outage or is the power cord unplugged?

● Is there a special uorescent light or neon sign nearby?

●

English - 6

English - 7

CONNECTIONS

Connecting VHF and UHF Antennas

If your antenna has a set of leads that look like the diagram to the right, see ‘Antennas with

300 Ω Flat Twin Leads’ below.

If your antenna has one lead that looks like the diagram to the right, see ‘Antennas with 75 Ω

Round Leads’. If you have two antennas, see ‘Separate VHF and UHF Antennas’.

Antennaswith300ΩFlatTwinLeads

If you are using an off-air antenna (such as a roof antenna or ‘rabbit ears’) that has 300 Ω twin at leads, follow the directions below.

1. Place the wires from the twin leads under the screws on a 300-75 Ω adapter

(not supplied). Use a screwdriver to tighten the screws.

Plug the adaptor into the ANT IN terminal on the back of the TV.

Antennaswith75ΩRoundLeads

Plug the antenna lead into the ANT IN terminal on the back of the TV.

ANT IN

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops).

1. Connect both antenna leads to the combiner.

Plug the combiner into the ANT IN terminal on the bottom of the rear panel.

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

Plug the incoming cable into the ANT IN terminal on the back of the TV.

Because this TV is cable-ready, you do not need a cable box to view unscrambled cable

channels.

Connecting to a Cable Box that Descrambles All Channels

1. Find the cable that is connected to the ANT OUT terminal on your cable box.

This terminal might be labeled ‘ANT OUT’, ‘VHF OUT’ or simply, ‘OUT’.

Connect the other end of this cable to the ANT IN terminal on the back of the TV.

UHF

VHF

ANT IN ANT OUT

UHF

VHF

ANT IN

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a twoway splitter, an RF (A/B) switch and four lengths of RF cable. (These items are available at most electronics stores.)

ANT IN

Incoming cable

Splitter

Cable Box

RF (A/B) Switch

1. Find and disconnect the cable that is connected to the ANT IN terminal on your cable box.

This terminal might be labeled ‘ANT IN’, ‘VHF IN’ or simply, ‘IN’.

Connect this cable to a two-way splitter.

. Connect an RF cable between the OUTPUT terminal on the splitter and the IN terminal on the cable box.

Connect an RF cable between the ANT OUT terminal on the cable box and the B–IN terminal on the RF(A/B) switch.

. Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.

Connect the last RF cable between the OUT terminal on the RF (A/B) switch and the ANT IN terminal on the rear of the TV.

After you have made this connection, set the A/B switch to the ‘A’ position for normal viewing. Set the A/B switch to the ‘B’ position to view scrambled channels. (When you set the A/B switch to ‘B’, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)

Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via HDMI

This connection can only be made if there is an HDMI Output connector on the external device.

DVD / Blu-ray player / Cable Box /

Satellite receiver (Set-Top Box)

TV Rear Panel

TV Rear

HDMI Cable (Not supplied)

1. Connect an HDMI Cable between the HDMI IN 1(DVI), 2 jack on the TV and the HDMI jack on the DVD / Blu-ray Player or

Cable Box / Satellite receiver (Set-Top Box). What is HDMI?

HDMI(High-Denition Multimedia Interface), is an interface that enables the transmission of digital audio and video signals

●

using a single cable. The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth Digital

●

Copy Protection) coding feature installed.

Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a dif

N N

The TV may not output sound and pictures may be displayed with abnormal color when DVD / Blu-ray player / Cable Box

ferent back panel conguration.

/ Satellite receiver (Set-Top Box) supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 1(DVI) jack and the audio cables to the PC / DVI AUDIO IN jacks on the back of the TV. If this happens, contact the company that provided the DVD / Blu-ray

player / Cable Box / Satellite receiver (Set-Top Box) to conrm the HDMI version, then request an upgrade.

HDMI cables that are not 1.3 may cause annoying icker or no screen display.

English - 8

English - 9

Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via DVI

This connection can only be made if there is a DVI Output connector on the external device.

TV Rear Panel

DVD / Blu-ray player / Cable Box /

Satellite receiver (Set-Top Box)

Audio Cable (Not supplied)

DVI to HDMI Cable (Not supplied)

1. Connect a DVI to HDMI Cable or DVI-HDMI Adapter between the HDMI IN 1(DVI) jack on the TV and the DVI jack on the DVD

/ Blu-ray player / Cable Box / Satellite receiver (Set-Top Box).

2. Connect Audio Cables between the PC / DVI AUDIO IN jack on the TV and the DVD / Blu-ray player / Cable Box / Satellite

receiver (Set-Top Box).

Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a dif

When connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box), match the color of the connection

terminal to the cable. When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.

ferent back panel conguration.

Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via Component cables

The rear panel jacks on your TV make it easy to connect a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) to your TV.

TV Rear Panel

DVD / Blu-ray player / Cable Box /

Satellite receiver (Set-Top Box)

Audio Cable (Not supplied)

Component Cable (Not supplied)

1. Connect a Component Cable between the COMPONENT IN / AV IN [Y, PB, PR] jacks on the TV and the COMPONENT [Y, PB,

PR] jacks on the DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box).

2. Connect Audio Cables between the COMPONENT IN / AV IN [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the

DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box).

Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and Pr (Red) for enhanced video quality.

Be sure to match the component video and audio connections. For example, if connecting a Component video cable to COMPONENT IN / AV IN, connect the audio cable to COMPONENT IN / AV IN also.

Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a dif

N N

When connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box), match the color of the connection terminal to the cable.

ferent back panel conguration.

Connecting a VCR

TV Rear Panel

VCR Rear Panel

Audio Cable (Not supplied)

Video Cable (Not supplied)

Connect a Video Cable between the COMPONENT IN / AV IN [Y/VIDEO] jack on the TV and the VIDEO OUT jack on the

VCR.

Connect Audio Cables between the COMPONENT IN / AV IN [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the VCR.

If you have a ‘mono’ (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks

of the TV. Alternatively, connect the cable to the ‘R’ jack. If your VCR is stereo, you must connect two cables.

Each VCR has a different back panel conguration.

When connecting a VCR, match the color of the connection terminal to the cable.

Connecting a Digital Audio System

The rear panel jacks on your TV make it easy to connect a Digital Audio System (Home theater/Receiver) to your TV.

Digital Audio System

Optical Cable (Not supplied)

1. Connect an Optical Cable between the DIGITAL AUDIO OUT (OPTICAL) jacks on the TV and the Digital Audio Input jacks

on the Digital Audio System.

When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack:

Decrease the volume of the TV and adjust the volume level with the system’s volume control.

5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.

Each Digital Audio System has a different back panel conguration.

When the Home Theater receiver is set to On, you can hear sound output from the TV’s Optical jack. When the TV is

displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital component such as a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver. If you want to hear 5.1 channel audio, connect the digital audio out jack on DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) directly to an

Amplier or Home Theater, not the TV.

TV Rear Panel

English - 10

English - 11

Connecting a Camcorder

Using a Video Cable

TV Rear Panel

Camcorder

1. Connect a Video Cable between the COMPONENT IN / AV IN [Y/VIDEO] jack on the TV and the VIDEO OUT jack

on the camcorder.

2. Connect Audio Cables between the COMPONENT IN / AV IN [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks

on the camcorder.

Each Camcorder has a different back panel conguration.

When connecting a Camcorder, match the color of the connection terminal to the cable.

Audio Cable (Not supplied)

Video Cable (Not supplied)

Using an HDMI Cable

TV Rear Panel

HD Camcorder

HDMI Cable (Not supplied)

1. Connect an HDMI Cable between the HDMI IN 1(DVI), 2 jack on the TV and the HDMI OUT jack on the camcorder.

Connecting a PC

Using a D-Sub Cable

TV Rear Panel

PC Audio Cable (Not supplied)

D-Sub Cable (Not supplied)

1. Connect a D-Sub Cable between PC IN connector on the TV and the PC output connector on your computer.

2. Connect a PC Audio Cable between the PC / DVI AUDIO IN jack on the TV and the Audio Out jack of the sound card on your

computer.

When connecting a PC, match the color of the connection terminal to the cable.

Using an HDMI/DVI Cable

TV Rear Panel

3.5 mm Stereo mini-plug/2RCA Cable (Not supplied)

HDMI/DVI Cable (Not supplied)

1. Connect an HDMI/DVI cable between the HDMI IN 1(DVI) jack on the TV and the PC output jack on your computer.

2. Connect a 3.5 mm Stereo miniplug / 2RCA Cable between the PC / DVI AUDIO IN jack on the TV and the Audio Out jack of

the sound card on your computer.

When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) terminal.

Using an HDMI Cable

TV Rear Panel

1 HDMI Cable (Not supplied)

1. Connect an HDMI cable between the HDMI IN 1(DVI), 2 jack on the TV and the PC output jack on your computer.

Each PC has a different back panel conguration.

English - 12

English - 13

OPERATION

Viewing the menus

Before using the TV, follow the steps below to learn how to navigate the menu in order to select and adjust different functions.

1. Press the MENU button. The main menu is displayed on the screen. Its left side has the following icons: Picture,

Sound, Channel, Setup, Input, Application, Support.

2. Press the ▲ or ▼ button to select one of the icons.

Press the ◄ or ► button to access the icon’s sub-menu.

. Press the ▲ or ▼ button to move to items in the menu.

Press the ENTER

button to enter items in the menu.

4. Press the ▲/▼/◄/► button to change the selected items.

Press the RETURN button to return to the previous menu.

. Press the EXIT button to exit from the menu.

Using the remote control buttons

Button Operations Button Operations

RETURN

EXIT

Display the main on-screen menu.

Return to the previous menu.

Exit the on-screen menu.

▲/▼/◄/►/

ENTER

Example: Setting the TV’s Brightness in the Picture Menu

Adjusting the Brightness to 80



Press the MENU button to display the menu.

Picture

Mode : Standard

Backlight : 8

Contrast : 95

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Move the cursor and select an item. Select the currently selected item.

Conrm the setting.

Picture

Mode : Standard

Backlight : 8

Contrast : 95

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Press the ENTER

button to select Picture.

3. Press the ▲ or ▼ button to select Brightness.

Press the ENTER

button.

5. Press the ◄ or ► button until the Brightness changes to 80.

Press the ENTER

Press the EXIT button to exit from the menu.

button.

Picture

Mode   :Standard ►

Backlight : 8

Contrast : 95

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Backlight : 8

Picture

Contrast : 95

Brightness  :45  ►

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Advanced Settings

Picture Options

Picture Reset

Brightness 45

Move L Adjust E Enter R Return

Brightness 80

Move L Adjust E Enter R Return

Plug & Play Feature

When the TV is initially powered on, basic settings proceed automatically and subsequently.

1. Press the POWER

You can also use the POWER

The message Menu Language, Store Demo, Channels, and Time will be set. is

button on the remote control.

button on the TV.

Menu Language, Store Demo, Channels, and Time will be set.

Plug & Play

Start

displayed.

Press the ENTER

button, then Sets the menu language. menu is automatically

displayed.

3. Press the ▲ or ▼ button to select the language, then press the ENTER

button. The message Select ‘Home Use’ when

installing this TV in your home. is displayed.

4. Press the ◄ or ► button to select Store Demo or Home Use, then press the ENTER

button. The message Select the

Antenna source to memorize. is displayed.

We recommend setting the TV to Home Use mode for the best picture in your home environment.

Store Demo mode is only intended for use in retail environments. If the unit is accidentally set to Store Demo mode and you want to return to Home Use (Standard): Press the volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.

. Press the ▲ or ▼ button to memorize the channels of the selected connection. Press the ENTER

Air: Air antenna signal. / Cable: Cable antenna signal. / Auto: Air and Cable antenna signals.

In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the ▲, ▼, ◄ or ► button, then press the ENTER

button. If you have Digital cable, select the cable system signal source for both Analog

button to select Start.

and Digital. Contact your local cable company to identify the type of cable system that exists in your particular area.

6. Press the ENTER

To stop the search before it has nished, press the ENTER

After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then reappears. Press the ENTER

button to select Start. The TV will begin memorizing all of the available channels.

button with Stop selected.

button when channel memorization is complete. The message Set the Clock Mode. is

displayed.

7. Press the ENTER Press the ▲ or ▼ button to select Auto, then Press the ENTER

button.

button. The message Set to daylight saving time. is

displayed. If you select Manual, Set current date and time is displayed.

8. Press the ▲ or ▼ button to select Off, On or Auto, then press the ENTER

9. Press the ▲ or ▼ button to highlight the time zone for your local area. Press the ENTER

button.

button. If you have received a

digital signal, the time will be set automatically. If not, see page 22 to set the clock.

10. The connection method to provide the best quality HD is offered. After conrming the method, press the ENTER

11. The message Enjoy your TV. is displayed. When you have nished, press the ENTER

button.

Enter

If you want to reset this feature...

Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER

2. Press the ENTER

The Plug & Play feature is only available in the TV mode.

button again to select Plug & Play.

button.

English - 14

English - 15

CHANNEL CONTROL

ConguringtheChannelMenu

Antenna→Air/Cable

❑

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).

Press the TOOLS button to display the Tools menu. You can also set the Antenna by

selecting Tools→SwitchtoCable(or Switch to Air).

Auto Program

❑

Air: Air antenna signal. / Cable: Cable antenna signal. / Auto: Air and Cable antenna



signals

When selecting the Cable TV system: Selects the cable system. STD, HRC and IRC

identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected.

After all the available channels are stored, it starts to remove scrambled channels (Clear Scrambled Channels). The Auto

program menu then reappears. If you want to stop Auto Programming, press the ENTER

button. The Stop Auto Program? message will be displayed.

Select Yes by pressing the ◄ or ► button, then press the ENTERE button.

Clear Scrambled Channels (digital channels only)

❑

This function is used to lter out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes.

To stop searching scrambled channels: Press the ENTER

button to select Stop. Press the ◄ button to select Yes, then

press the ENTERE button. This function is only available in Cable mode.

Channel

Antenna  :Air  ►

Auto Program

Clear Scrambled Channel

Channel List

Fine Tune

Channel List

❑

For detailed procedures on using the Channel List, refer to the ‘Managing Channels’ instructions.

You can select these options by simply pressing the CH LIST button on the remote control.

Fine Tune (analog channels only)

❑

Use ne tuning to manually adjust a particular channel for optimal reception.

If you do not store the ne-tuned channel in memory, adjustments are not saved.

* will appear next to the name of ne-tuned channels.

To reset the ne tuning setting, press the ▼ button to select Reset, then press the ENTER

Managing Channels

Using this menu, you can add / delete or set favorite channels and use the program guide for digital broadcasts.



All Channels

Shows all currently available channels.



Added Channels

Shows all added channels.



Favorite

Shows all favorite channels.

To select the favorite channels you have set up, press the FAV.CH button on the remote control.

button.

Added Channels

Air

2 Air

4 Air

4-2 ♥ TV #8

8 Air

13 Air

13-1 ♥ TV #3

Alice’s Adventures in Wonderland

Zoom Select T Tools

Programmed



Shows all current reserved Programs.

Select a channel in the All Channels, Added Channels or Favorite screen by pressing the ▲ / ▼ buttons, and pressing the

ENTER

button. Then you can watch the selected channel.

Using the Color buttons with the Channel List

Green (Zoom): Enlarges or shrinks a channel number.

–

Yellow (Select): Selects multiple channel lists. You can perform the add / delete or add to Favorite / delete from Favorite

–

function for multiple channels at the same time. Select the required channels and press the yellow button to set all the selected channels at the same time. The

–

TOOLS (Tools): Displays the Add (or Delete), Add to Favorite (or Delete from Favorite), Timer Viewing, Channel

mark appears to the left of the selected channels.

Name Edit, Select All (or Deselect All), Auto Program menus (The Options menus may differ depending on the situation.)

Channel Status Display Icons

–

♥

: A channel set as a Favorite.

–

: A channel selected by pressing the yellow button.

–

(

: A Program currently being broadcast.

–

)

: A reserved program

Channel List Option Menu (in All Channels / Added Channels / Favorite)

Press the TOOLS button to use the option menu.

Option menu items may differ depending on the channel status.

Add / Delete



You can delete or add a channel to display the channels you want.

All deleted channels will be shown on All Channels menu.

A gray-colored channel indicates the channel has been deleted.

The Add menu only appears for deleted channels.

You can also delete a channel from the Added Channels or Favorite menu in the same

manner.

Add to Favorite / Delete from Favorite



You can set channels you watch frequently as Favorite.

Press the TOOLS button to display the Tools menu. You can also set the add to (or delete from) Favorites by selecting Tools

→

AddtoFavorite (or Delete from Favorite).

The ♥ symbol will be displayed and the channel will be set as a favorite.

All favorite channels will be shown in the Favorite menu.

Timer Viewing



If you reserve a program you want to watch, the channel is automatically switched to the reserved channel in the Channel List;

even when you are watching another channel. To reserve a program, set the current time rst. (refer to page 22)

Only memorized channels can be reserved.

You can set the channel, month, day, year, hour and minute directly by pressing the number buttons on the remote control.

Reserving a program will be shown in the Programmed menu.

Digital Program Guide and Viewing Reservation

When a digital channel is selected, and you press the ► button, the Program Guide for the channel appears.

a program according to the procedures described above.



Channel Name Edit (analog channels only)

Channels can labeled so that their call letters appear whenever the channel is selected.

The names of digital broadcasting channels are automatically assigned and cannot be labeled.



Select All / Deselect All

●

Select All: You can select all the channels in the channel list.

●

Deselect All: You can deselect all the selected channels.

You can only select Deselect All when there is a selected channel.



Auto Program

For further details on setting up options, refer to page 15.

All Channels

Air

2 Air

4 Air

4-2 ♥ TV #8

8 Air

13 Air

13-1 ♥ TV #3

Alice’s Adventures in Wonderland

Zoom Select T Tools

You can reserve

Delete

Add to Favorite

Timer Viewing

Channel Name Edit

Select All

Auto Program

English - 16

English - 17

Channel List Option Menu (in Programmed)

You can view, modify or delete a reservation.

Press the TOOLS button to use the option menu.

Change Info



Select to change a viewing reservation.

Cancel Schedules



Select to cancel a viewing reservation.

Information



Select to view a viewing reservation. (You can also change the reservation information.)

Select All



Select all reserved Programs.

PICTURE CONTROL

ConguringthePictureMenu

Mode

❑

You can select the type of picture which best corresponds to your viewing requirements.

Press the P.MODE button on the remote control repeatedly to select the desired picture

mode.



Dynamic

Selects the picture for increased denition in a bright room.



Standard

Selects the picture for the optimum display in a normal environment.



Movie

Selects the picture for viewing movies in a dark room.

Programmed

1 / 1 / 2009

9:08 am 5 TV3 The

3:15 pm 2 TV3 The Equalizer

5:50 pm 2 TV3

Air

Zoom Select

Picture

Mode  :Standard  ►

Backlight : 8

Contrast : 95

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Change Info

Cancel Schedules

Information

McMillan & Wife

Select All

Tools E Information

Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)

❑

Your television has several setting options that allow you to control the picture quality.

Backlight: Adjusts the brightness of LCD back light.

●

Contrast: Adjusts the contrast level of the picture.

●

Brightness: Adjusts the brightness level of the picture

● Sharpness: Adjusts the edge denition of the picture.

●

Color: Adjusts color saturation of the picture.

●

Tint (G/R): Adjusts the color tint of the picture.

●

When you make changes to Backlight, Contrast, Brightness, Sharpness, Color or Tint (G/R) the OSD will be adjusted

accordingly. In PC mode, you can only make changes to Backlight, Contrast and Brightness.

Settings can be adjusted and stored for each external device you have connected to an input of the TV.

The energy consumed during use can be signicantly reduced if the brightness level of the picture is lowered, which will

reduce the overall running cost.

Advanced Settings

❑

Samsung’s new TVs allow you to make even more precise picture settings than previous models.

Advanced Settings is available in Standard or Movie mode.

In PC mode, you can only make changes to Gamma and White Balance from among the

Advanced Settings items.



BlackTone→Off/Dark/Darker/Darkest

Advanced Settings

Black Tone : Off ►

Dynamic Contrast : Medium Gamma : 0 Color Space : Native White balance

Tone : 0

Flesh Edge Enhancement : On

You can select the black level on the screen to adjust the screen depth.

Move E Enter R Return

DynamicContrast→Off/Low/Medium/High



You can adjust the screen contrast so that the optimal contrast is provided.

Gamma



You can adjust the primary color (red, green, blue) Intensity. (-3 ~ +3)

Color Space



Color space is a color matrix composed of red, green and blue colors. Select your favorite color space to experience the most natural color.

Native: Native Color Space offers deep and rich color tone.

●

Auto: Auto Color Space automatically adjusts to the most natural color tone based on program sources.

●

White Balance



You can adjust the color temperature for more natural picture colors.

R-Offset / G-Offset / B-Offset / R-Gain / G-Gain / B-Gain: You can adjust the Color ‘temperature’ in the light areas by

●

changing the values of R, G, B. Recommended for advanced users only. Reset: The previously adjusted white balance will be reset to the factory defaults.

●

Flesh Tone



You can emphasize the pink ‘esh tone’ in the picture.

Changing the adjustment value will refresh the adjusted screen.

EdgeEnhancement→Off/On



You can emphasize object boundaries in the picture.

Picture Options

❑

In PC mode, you can only make changes to the Color Tone and Size from among the

items in Picture Options.



ColorTone→Cool/Normal/Warm1/Warm2

Warm1 or Warm2 is only activated when the picture mode is Movie.

Settings can be adjusted and stored for each external device you have connected to an

Picture Options

Color Tone : Normal ►

Size : 16:9 Digital NR : Auto

HDMI Black Level : Normal

Film Mode : Off

input of the TV.



Size

Move E Enter R Return

Occasionally, you may want to change the size of the image on your screen. Your TV comes

with six screen size options, each designed to work best with specic types of video input.

Your cable box/satellite receiver may

have its own set of screen sizes as well. In general, though, you should view the TV in 16:9 mode as much as possible.

Alternately, you can press the P.SIZE button on the remote control repeatedly to change the picture size.

16:9 : Sets the picture to 16:9 wide mode.

● Zoom1: Magnies the size of the picture on the screen.

● Zoom2: Magnies the size of the picture more than Zoom1.

● Wide Fit: Enlarges the aspect ratio of the picture to t the entire screen.

●

4:3 : Sets the picture to 4:3 normal mode.

●

Screen Fit: Use the function to see the full image without any cutoff when HDMI (720p/1080i/1080p), Component

●

(1080i/1080p) or DTV (1080i) signals are input.

16:9

Zoom1 U Move Zoom2 U Move

16:9 Zoom1 Zoom2

Wide Fit U Move

Wide Fit 4:

4:3 Screen Fit

3 Screen Fit

English - 18

English - 19

Temporary image retention may occur when viewing a static image on the set for more than two hours.

After selecting Zoom1, Zoom2 or Wide Fit: Press the ◄ or ► button to select Position, then press the ENTER

Press the ▲ or ▼ button to move the picture up and down.

After selecting Screen Fit in HDMI (1080i/1080p) or Component (1080i/1080p) mode, you made need to center the picture: Press the ◄ or ► button to select Position, then press the ENTER picture.

Reset: Press the ◄ or ►button to select Reset, then press the ENTER

HD (High Denition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720)

Settings can be adjusted and stored for each external device you have connected to an input of the TV.

Input Source Picture Size

TV, AV, Component (480i, 480p) 16:9, Zoom1, Zoom2, 4:3 DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080P) 16:9, 4:3, Wide Fit, Screen Fit PC 16:9, 4:3

Digital



❑

NR→Off/Low/Medium/High/Auto

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen.

When the signal is weak, select one of the other options until the best picture is displayed.

HDMIBlackLevel→Normal/Low

You can select the black level on the screen to adjust the screen depth.

This function is active only when an external device is connected to the TV via HDMI. The HDMI Black Level function may not

be compatible with all external devices.

FilmMode→Off/Auto

The TV can be set to automatically sense and process lm signals from all sources and adjust the picture for optimum quality.

Film Mode is supported in TV, Video, Component (480i / 1080i) and HDMI (480i / 1080i).

PictureReset→ResetPictureMode/Cancel

Resets all picture settings to the default values.

Reset Picture Mode: Current picture values return to default settings.

button. Press the ▲, ▼, ◄ or ►button to move the

button. You can initialize the setting.

button.

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP)

The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)

1. First, click on ‘Control Panel’ in the Windows start menu.

When the control panel window appears, click on ‘Appearance and Themes’ and a display dialog-box will appear.

. When the control panel window appears, click on ‘Display’ and a display dialog-box will appear.

Navigate to the ‘Settings’ tab on the display dialog-box.

The correct size setting (resolution): Optimum: 1920 X 1080 pixels If a vertical frequency option exists on your display settings dialog box, the correct value is ‘60’ or ‘60 Hz’. Otherwise, just click

‘OK’ and exit the dialog box.

Display Modes

If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system doesn’t equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video. For the display modes listed below, the screen image has been optimized during manufacturing.



D-Sub and HDMI/DVI Input

Mode Resolution

IBM 640 X 350 31.469 70.086 25.175 +/-

MAC 640 X 480 35.000 66.667 30.240 -/-

VESA CVT 720 X 576 35.910 59.950 32.750 -/+

VESA DMT 640 X 480 31.469 59.940 25.175 -/-

VESA GTF 1280 X 720 52.500 70.000

VESA DMT /

DTV CEA

720 X 400 31.469 70.087 28.322 -/+

832 X 624 49.726 74.551 57.284 -/-

1152 X 870 68.681 75.062 100.000 -/-

1152 X 864 53.783 59.959 81.750 -/+ 1280 X 720 44.772 59.855 74.500 -/+ 1280 X 960 75.231 74.857 130.000 -/+ 1280 X 720 56.456 74.777 95.750 -/+

640 X 480 37.861 72.809 31.500 -/640 X 480 37.500 75.000 31.500 -/800 X 600 37.879 60.317 40.000 +/+ 800 X 600 48.077 72.188 50.000 +/+

800 X 600 46.875 75.000 49.500 +/+ 1024 X 768 48.363 60.004 65.000 -/1024 X 768 56.476 70.069 75.000 -/1024 X 768 60.023 75.029 78.750 +/+ 1152 X 864 67.500 75.000 108.000 +/+

1280 X 1024 63.981 60.020 108.000 +/+ 1280 X 1024 79.976 75.025 135.000 +/+

1280 X 800 49.702 59.810 83.500 -/+ 1280 X 800 62.795 74.934 106.500 -/+ 1280 X 960 60.000 60.000 108.000 +/+

1360 X 768 47.712 60.015 85.500 +/+ 1440 X 900 55.935 59.887 106.500 -/+ 1440 X 900 70.635 74.984 136.750 -/+

1680 X 1050 65.290 59.954 146.250 -/+

1280 X 1024 74.620 70.000 128.943 -/-

1920 X 1080p 67.500 60.000 148.500 +/+

Horizontal Frequency

(KHz)

Vertical Frequency

(Hz)

Pixel Clock Frequency

(MHz)

89.040

Sync Polarity

(H / V)

-/+

When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.

Setting up the TV with your PC

Preset: Press the SOURCE button to select PC mode.

Auto Adjustment

❑

Use the Auto Adjust function to have the TV set automatically adjust the video signals it

receives. The function also automatically ne-tunes the settings and adjusts the frequency

values and positions.

Press the TOOLS button to display the Tools menu. You can also set the Auto Adjustment

by selecting Tools→Auto This function does not work in DVI-HDMI mode.

Screen

❑

Adjustment.

Brightness : 45

Picture

Sharpness : 50

AutoAdjustment   ►

Screen

Advanced Settings

Picture Options

Picture Reset

The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by ne tuning alone, then make the vertical frequency adjustments on your PC and ne tune again. After the noise has been reduced, re-adjust the

picture so that it is aligned on the center of the screen.



Coarse / Fine

The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned on the center of screen.



PC Position

Adjust the PC’s screen positioning if it does not t the TV screen. Press the ▲ or ▼ button to adjusting the Vertical-Position. Press the ◄ or ►button to adjust the Horizontal-Position.



Image Reset

You can replace all image settings with the factory default values.

English - 20

English - 21

SOUND CONTROL

ConguringtheSoundMenu

Mode→Standard/Music/Movie/ClearVoice/Custom

❑

You can select a sound mode to suit your personal preferences.

Press the S.MODE button on the remote control repeatedly to select one of the sound

settings.

Equalizer

❑

The sound settings can be adjusted to suit your personal preference.

Mode



Selects the sound mode among the predened settings.

Balance L/R



Adjusts the balance between the right and left speaker.

100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment)



To adjust the level of different bandwidth frequencies.

Reset



Resets the equalizer settings to the default values.

SRSTruSurroundHD→Off/On

❑

SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.

Press the SRS button on the remote control to select On or Off.

Sound

Mode   :Custom ►

Equalizer

SRS TruSurround HD : Off

Preferred Language : English

Multi-Track Sound : Mono

Auto Volume : Off

Speaker Select : TV Speaker

Preferred Language (digital channels only)

❑

Digital-TV broadcasts are capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages).

You can listen in a language other than the Preferred Language by pressing the MTS button on the remote control.

Preferred Language is available only in Digital TV mode.

You can only select the language from among the actual languages being broadcast.

Multi-Track Sound (MTS) (analog channels only)

❑

Press the MTS button on the remote control repeatedly to select Mono, Stereo or SAP.

Mono: Choose for channels that are broadcasting in mono or if you are having difculty receiving a stereo signal.

●

Stereo: Choose for channels that are broadcasting in stereo.

●

SAP: Choose to listen to the Separate Audio Program, which is usually a foreign-language translation.

●

Multi-Track Sound is available only in Analog TV mode.

Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP.

AutoVolume→Off/On

❑

Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.

Speaker Select

❑

When you watch TV with it connecting to a Home theater, turn the TV speakers off so you can listen to sound from the Home theater’s (external) speakers.



External Speaker: Used to listen to the sound of the External (Home Theater) Speakers.



TV Speaker: Used to listen to the sound of the TV Speakers.

If you select External Speaker in the Speaker Select menu, the sound settings will be limited.

The volume and MUTE buttons do not operate when the Speaker Select is set to External Speaker. Please set the volume on your Home theater.

TV's Internal Speakers Audio Out (Optical, L/R Out) to Sound System

RF, AV, Component, PC, HDMI RF, AV, Component, PC, HDMI

TV Speaker Sound Output Sound Output

External Speaker Mute Sound Output

Video No Signal Mute Mute

SoundReset→ResetAll/ResetSoundMode/Cancel

❑

You can restore the Sound settings to the factory defaults.

Reset Sound Mode: Current sound values return to default settings.

SETUP

ConguringtheSetupMenu

Language

❑

You can set the menu language.

Time

❑

Clock



Setting the clock is necessary in order to use the various timer features of the TV.

The current time will appear every time you press the INFO button.

If you disconnect the power cord, you have to set the clock again.

Clock Mode

●

Plug & Play

Setup

Language  :English ►

Time

Game Mode : Off

V-Chip

Caption

Melody

Energy Saving : Off

You can set up the current time manually or automatically.

Auto: Set the current time automatically using the time from a digital broadcast.

–

Manual: Set the current time to a manually specied time.

–

Depending on the broadcast station and signal, the auto time may not be set correctly. If this occurs, set the time

manually. The Antenna or cable must be connected in order to set the time automatically.

Clock Set

●

You can set the current time manually.

This function is only available when Clock Mode is set to Manual.

You can set the month, day, year, hour, minute and am/pm directly by pressing the number buttons on the remote control.

Time Zone

●

Select your time zone.

This function is only available when Clock Mode is set to Auto.

DST (Daylight Saving Time) → Off / On / Auto

●

Switches the Daylight Saving Time function on or off.

This function is only available when Clock Mode is set to Auto.

Sleep Timer



The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes).

Press the TOOLS button to display the Tools menu. You can also set the sleep timer by selecting Tools→SleepTimer.

To cancel the Sleep Timer function, select Off.

: Medium

English - 22

English - 23

Timer 1 / Timer 2 / Timer 3



Three different on / off timer settings can be made. You must set the clock rst.

On Time: Set the hour, minute, am/pm, and activate/inactivate. (To activate the timer with the setting you’ve chosen, set to

●

Activate.) Off Time: Set the hour, minute, am/pm, and activate/inactivate. (To activate the timer with the setting you’ve chosen, set to

●

Activate.) Volume: Set the desired volume level.

●

Antenna: View antenna type. (Air or Cable)

●

You can set the Antenna by selecting Channel→Antenna. (refer to page 15)

Channel: Select the desired channel.

●

Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.

●

When Manual is selected, press the ►button to select the desired day of the week. Press the ENTER

button over the

desired day and the c mark will appear.

You can set the hour, minute and channel by pressing the number buttons on the remote control.

Auto Power Off

When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is on for too long time.

GameMode→Off/On

❑

When connecting to a game console such as PlayStationTM or XboxTM, you can enjoy a more realistic gaming experience by selecting the game menu.

Restrictions on game mode (Caution)

To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu.

–

If you display the TV menu in Game mode, the screen shakes slightly.

–

If Game Mode is On :

Picture mode is automatically changed to Standard and cannot be changed.

–

Sound mode is automatically changed to Custom and cannot be changed. Adjust the sound using the equalizer.

–

The Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer

–

settings to the factory defaults.

Game Mode is not available in regular TV and PC mode.

If the picture is poor when external device is connected to TV, check if Game Mode is On. Set Game Mode to Off and

connect external devices.

V-Chip

❑

The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal ID number) before any of the V-Chip restrictions are set up or changed.

V-Chip function is not available in HDMI, Component or PC mode.

The default PIN number of a new TV set is 0-0-0-0.

If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to 0-0-0-0 :

POWER (Off) → MUTE→8→2→4→POWER (On). Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings.

V-ChipLock→Off/On



You can block rated TV Programs.

TV Parental Guidelines



You can block TV programs depending on their rating. This function allows you to control what your children are watching.

TV-Y: Young children / TV-Y7: Children 7 and over / TV-G: General audience /

●

TV-PG: Parental guidance / TV-14: Viewers 14 and over / TV-MA: Mature audience ALL: Lock all TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation /

●

L: Adult Language / D: Sexually Suggestive Dialog The V-Chip will automatically block certain categories that are more restrictive. For

example, if you block TV-Y category, then TV-Y7 will automatically be blocked. Similarly, if you block the TV-G category, then all the categories in the young adult group will be

TV Parental Guidelines

ALL FV V S L D

TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA

Move E Enter R Return

blocked (TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (D, L, S, V) work together similarly.

The V-chip will automatically block certain categories that are ‘More restrictive’. For example, if you block L sub-rating in TV-

PG, then the L sub-ratings in TV-14 and TV-MA will automatically be blocked.

Allow All

Block All

MPAA Rating



You can block movies depending on their MPAA rating. The Motion Picture Association of America(MPAA) has implemented a rating system that provides parents or guardians with

advance information on which lms are appropriate for children.

G: General audience (no restrictions).

●

PG: Parental guidance suggested.

●

PG-13: Parents strongly cautioned.

●

R: Restricted. Children under 17 should be accompanied by an adult.

●

NC-17: No children under age 17.

●

X: Adults only.

●

NR: Not rated.

●

The V-Chip will automatically block any category that is ‘More restrictive’. For example, if you block the PG-13 category, then

G PG PG-13 R NC-17 X NR

MPAA Rating

Move E Enter R Return

Allow All Block All

R, NC-17 and X will automatically be blocked also.

Canadian English



C: Programming intended for children under age 8.

●

C8+: Programming generally considered acceptable for children 8 years and over to watch on their own.

●

G: General programming, suitable for all audiences.

●

PG: Parental Guidance.

●

14+: Programming contains themes or content which may not be suitable for viewers under the age of 14.

●

18+: Adult programming.

●

The V-Chip will automatically block any category that is ‘More restrictive’. For example, if you block G category, then PG, 14+

and 18+ will automatically be blocked also.

Canadian French



G: General

●

8 ans+: Programming generally considered acceptable for children 8 years and over to watch on their own.

●

13 ans+: Programming may not be suitable for children under the age of 13.

●

16 ans+: Programming is not suitable for children under the age of 16.

●

18 ans+: Programming restricted to adults.

●

The V-Chip will automatically block any category that is ‘More restrictive’. For example, if you block 8 ans+ category, then 13

ans+, 16 ans+ and 18 ans+ will automatically be blocked also.

Downloadable U.S. Rating



Parental restriction information can be used while watching DTV channels

If information is not downloaded from the broadcasting station, the Downloadable U.S.

rating menu is deactivated. Parental restriction information is automatically downloaded while watching DTV channels.

It may take several seconds. The Downloadable U.S. rating menu is available for use after information is downloaded

from the broadcasting station. However, depending on the information from the broadcasting station, it may not be available for use.

Parental restriction levels differ depending on the broadcasting station. The default menu

Rating title

Humor Level ► 1/2

DH MH H VH EH

The number of current

rating information

Downloadable U.S. Rating

Allow All

Block All

Move E Enter R Return

name and Downloadable US rating changes depending on the downloaded information. Even if you set the On-screen display to your desired language, the Downloadable U.S. Rating menu will appear in English

only. The rating will automatically block certain categories that are more restrictive.

The rating titles (For example: Humor Level..etc) and TV ratings (For example: DH, MH, H..etc) may differ depending on the

broadcasting station.

Change PIN



The Change PIN screen will appear. Choose any 4 digits for your PIN and enter them. As soon as the 4 digits are entered, the ConrmNewPIN screen appears. Re enter the same 4 digits. When the Conrm screen

disappears, your PIN has been memorized.

If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to 0-0-0-0 :

POWER (Off) → MUTE→8→2→4→POWER (On).

The number of all rating information

How to Reset the TV after the V-Chip Blocks a Channel (Emergency Escape)

If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear:

1. Enter your PIN, then press the ENTER

button and press the ▲ or ▼ button to

temporarily disable the V-Chip Lock.

If you forget the PIN, press the remote-control buttons in the following sequence, which resets

the pin to 0-0-0-0 : POWER (Off) → MUTE→8→2→4→POWER (On)

English - 24

Received Rating: TV-14/NL

This channel is blocked by a Parental Lock. Prees enter the PIN to unblock.

Change

Enter PIN

0~9

English - 25

Caption (On-Screen Text Messages)

❑

Caption→Off/On



You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen.

Press the CC button on the remote control to turn the Caption on or off.

The Caption feature doesn’t work in Component, HDMI or PC modes.

Caption Mode



You can select the desired caption mode.

The availability of captions depends on the program being broadcast.

Default / CC1~CC4 / Text1~Text4 (analog channels only)

●

The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to TV. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.)

Default / CC1~CC4 / Text1~Text4 / Service1~Service6 (digital channels only)

●

The Digital Captions function operates on digital channels.

Service1~6 in digital caption mode may not be available depending on the broadcast.

Digital Caption Options (digital channels only)



Size: This option consists of Default, Small, Standard and Large. The default is Standard.

●

Font Style: This option consists of Default, Style 0 ~ Style 7. You can change the font you want. The default is Style 0.

●

Foreground Color: This option consists of Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can

●

change the color of the letter. The default is White. Background Color: This option consists of Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can

●

change the background color of the caption. The default is Black. Foreground Opacity: This option consists of Default, Transparent, Translucent, Solid and Flashing. You can change the

●

opacity of the letter. Background Opacity: This option consists of Default, Transparent, Translucent, Solid and Flashing. You can change the

●

background opacity of the caption. Return to Default: This option sets each of Size, Font Style, Foreground Color, Background color, Foreground Opacity

●

and Background Opacity to its default. The Digital Caption Options are only enabled when the Caption Mode is Service 1 ~ Service 6. (If Caption Mode is the

default, the Digital Caption Options are enabled depending on the broadcast.) The availability of captions depends on the program being broadcast.

Default means to follow the standard set by the broadcaster.

Foreground and Background cannot be set to have the same color.

Foreground Opacity and Background Opacity cannot be both set to Transparent.

Melody→Off/Low/Medium/High

❑

A melody sound can be set to come on when the TV is powered On or Off.

The Melody does not play.

When no sound is output from the TV because the MUTE button has been pressed.

–

When no sound is output from the TV because the volume has been reduced to minimum with the VOL – button.

–

When the TV is turned off by Sleep Timer function.

–

EnergySaving→Off/Low/Medium/High/Auto

❑

This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the Energy Saving mode option to High to reduce eye fatigue as well as power consumption.

INPUT / SUPPORT

ConguringtheInputMenu

Source List

❑

Use to select TV or other external input sources such as DVD / Blu-ray players / Cable Box / Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice.

Press the SOURCE button on the remote control to view an external signal source.

TV mode can be selected by pressing the TV button.

TV / AV / Component / PC / HDMI1/DVI / HDMI2



You can choose only those external devices that are connected to the TV.

In the Source List, connected inputs will be highlighted and sorted to the top. Inputs that are not connected will be sorted to the bottom.

PC always stay activated.

Using the Color buttons on the remote with the Source list

Red (Refresh): Refreshes the connected external devices. Press this if your Source is on and connected, but does not

–

appear in the list. TOOLS (Tools): Displays the Edit Name and Information menus.

–

Edit Name

❑

Name the device connected to the input jacks to make your input source selection easier.



VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV / Blu-ray / HD DVD / DMA

When a PC with a resolution of 1920 X 1080 @ 60Hz is connected to the HDMI IN 1(DVI) port, you should set the HDMI1/DVI mode to DVI PC in the Edit Name of the Input mode.

When connecting an HDMI/DVI cable to the HDMI IN 1(DVI) port, you should set the HDMI1/DVI mode to DVI or DVI PC in the Edit Name of the Input mode. In this case, a separate sound connection is required.

Input

Source List

Edit Name

ConguringtheSupportMenu

Self Diagnosis

❑

Picture Test



If you think you have a picture problem, perform the picture test. Check the color pattern on the screen to see if the problem still exists.

Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes.

●

There may be a problem with the TV. Contact Samsung’s call center for assistance. No: If the test pattern is properly displayed, select No. There may be a problem with your

●

Support

SelfDiagnosis   ►

Software Upgrade

HD Connection Guide

Contact Samsung

external equipment. Please check your connections. If the problem still persists, refer to the external device’s user manual.

Sound Test



If you think you have a sound problem, please perform the sound test. You can check the sound by playing a built-in melody sound through the TV. ‘Does the problem still exist with this sound test?’ appears on the screen.

If you hear no sound from the TV’s speakers, before performing the sound test, make sure Speaker Select is set to TV

speaker in the Sound menu. The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing

the MUTE button. Yes: If during the sound test you can hear sound only from one speaker or not at all, select Yes. There may be a problem with

●

the TV. Contact Samsung’s call center for assistance. No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check

●

your connections. If the problem still persists, refer to the external device’s user manual.

Signal Strength (digital channels only)



Unlike analog channels, which can vary in reception quality from ‘snowy’ to clear, digital (HDTV) channels have either perfect

reception quality or you will not receive them at all. So, unlike analog channels, you cannot ne tune a digital channel.

You can,

however, adjust your antenna to improve the reception of available digital channels.

If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength.

Continue to adjust the antenna until you nd the best position with the strongest signal.

English - 26

English - 27

Software Upgrade

❑

Samsung may offer upgrades for TV’s  rmware in the future. Please visit Samsung.com or

contact the Samsung call center at 1-800-SAMSUNG (726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the SERVICE port located on your TV.

Insert a USB drive containing the  rmware upgrade into the SERVICE port on the side of

the TV. Please be careful to not disconnect the power or remove the USB drive while upgrades

are being applied. The TV will turn off and turn on automatically after completing the

 rmware upgrade. Please check the  rmware version after the upgrades are complete.

When software is upgraded, video and audio settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade.

HD Connection Guide

❑

This menu presents the connection method that provides the optimal quality for the HD TV. Refer to this information when connecting external devices to the TV.

❑

Contact Samsung

View this information when your TV does not work properly or when you want to upgrade the software.

You can view the information regarding the call center, product and software  le download method.

USB drive

ANYNET

Connecting Anynet+ Devices

Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote.

The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.

To connect to a TV

Anynet+ Device 1 Anynet+ Device 2

HDMI 1.3 Cable

1. Connect the HDMI IN 1(DVI), 2 jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI

cable.

HDMI 1.3 Cable

To connect to Home Theater

Anynet+ Device 1

HDMI 1.3 Cable

Home Theater

Anynet+ Device 2

Optical Cable

HDMI 1.3 Cable

1. Connect the HDMI IN 1(DVI), 2 jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable.

2. Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable. Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on the

Home Theater. When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the Home

Theater’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL

AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (ie Anynet Device 1 or 2) directly to the Ampli er or Home Theater,

not the TV. Connect only one Home Theater.

You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet+ functions.

Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.

Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.

Setting Up Anynet

Press the TOOLS button to display the Tools menu. You can also display Anynet+ menu by selecting Tools→Anynet

(HDMI-CEC).

Setup

❑

Anynet+ (HDMI-CEC)→Off/On



To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.

When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations

Application

Anynet+(HDMI-CEC)  ►

are deactivated.

AutoTurnOff→No/Yes



Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off

The active source on the TV remote must be set to TV to use the Anynet+ function.

If you set Auto Turn Off to Yes, connected external devices are also turned off when the

TV is turned off. If an external device is still recording, it may or may not turn off.

Device List

Setup

English - 28

Move E Enter R Return

Anynet+(HDMI-CEC) : On Auto Turn Off :

Move E Enter R Return

Yes

+ 98 hidden pages