Samsung LN46B630N1FXZA, LN40B630N1FXZA, LN37B650T1F/XZA Owner’s Manual

Contact 8AMSUNG WORLDWIDE
if you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Comuniquese con 8AMSUNG WORLDWIDE

Si desea formular alguna pregunta o comentario en relaci6n con los productos de Samsung, comunJquese con el centro de

atenci6n al cliente de SAMSUNG.

Samsung Electronics Canada Inc., Customer
Service 55 Standish Court Mississauga,

Ontario L5R 4B2 Canada

CANADA 1-800-SAMSU NG(726-7864) www.samsung.com/ca

Samsung Electronique Canada Inc., Service

la Clientele 55 Standish Court Mississauga,

Ontario L5R 4B2 Canada
Samsung Electronics America, Inc.

U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com/us 105 Challenger Road

Ridgefield Park, NJ 07660-0511

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!_

I

BN68-02089F-00

imagine the possibilities

Thank you for purchasing this Samsung product.
To receive more complete service, please
register your product at

www.samsu ng.com/reg ister

ModeJ Serial No

C3

important Warranty information Regarding Television Format Viewing

See the warranty card for more information onwarranty terms.

Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen
format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to
fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images

on screen, such as the dark sidebars on nonexpanded standard format television video and programming, should belimited to no

more than 5% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station Iogos, web sites

or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that

exceed the above guidelines can cause uneven aging of LCD Displays that leave subtle, but permanent burned-in ghost images in

the LCD picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary

patterns or dark bars.

On LCD models that offer picture sizing features, use these controls toview different formats as afull screen picture.

Becareful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format selection

and use, as well as burned-in images, are not covered by your Samsung limited warranty.

U.S.A Only
The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties.

In particular, this product is licensed under the following USpatents: 5,991,715, 5,740,317, 4,972,484, 5,214,678, 5,323,396,
5,539,829, 5,606,618, 5,530,655, 5,777,992, 6,289,308, 5,610,985, 5,481,643, 5,544,247, 5,960,037, 6,023,490, 5,878,080,
and under US Published PatentApplication No. 2001-44713-A1.

This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for
commercial use. The license does not cover any product unit other than this product unit and the license does not extend to

any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with
this product unit. The license only covers the use of this product unit to encode and/or decode audio files conforming to the

ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not
conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.

• Other countries
The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties.

This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for
commercial use. The license does not cover any product unit other than this product unit and the license does not extend to
any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with
this product unit. The license only covers the use of this product unit to encode and/or decode audio files conforming to the
ISO/IEC 11172-3or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not

conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.

• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung

Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG
will additionally provide Warranty Repair Service inthe United States on SAMSUNG products purchased in Canada, and
in Canada on SAMSUNG products purchased in the United States, for the warranty period originally specified, and to the
Original Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this
Statement, the Original LimitedWarranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the

Service Center. Transportation to and from the Service Center is the responsibility of the purchaser.
Conditions covered are limited only to manufacturing defects inmaterial orworkmanship, and only those encountered in

normal use of the product.
Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum

repair times, exchanges or replacements, accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free:

in the United States : 1-800-8AMSUNG (t-800-72G7864)
in Canada : 1-800-SAMSUNG

[]

Precautions When Displaying a Still image

A still image may cause permanent damage to the TV screen

• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image
retention is also known as screen burn. Toavoid such image retention, reduce the degree of brightness and contrast of the

screen when displaying a still image.

• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the

left, rightand centerof the screen caused bythe difference of light emission on the screen. Playing a DVD or
a game console may cause a similar effect to the screen. Damages caused by the above effect are not

covered by the Warranty.

• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To
prevent this effect, reduce the 'brightness' and 'contrast' when displaying still images.

© 2009 Samsung Electronics Co., Ltd.All rights reserved.

CONTENTS

[]List of Features..................................................................................2

" Accessories .......................................................................................2

iViewing the Contro] Panel .................................................................3

eeViewingthe Remote Control ..............................................................4

[] Instalhng Batteriesinthe Remote Control........................................ 5

iViewing the menus .......................................................................... 5

,-Plug & Pla_ Feature..........................................................................."1

u Sortingthe Music List ................................................................... 46

" Music_ist Option Menu ................................................................. 47

" PlayingMusic .................................................................................48

" MusicPlay option Menu ............................................................... 49

Ill Sorting the Movie List......................................................................49

,- Movie List Option Menu................................................................ 50

,- Playing a MovieFile ....................................................................... 50

,- Movie Play Option Menu ............................................................... 53

,- Using the Setup Menu .....................................................................54

,-Connecting VHF and UHFAntennas.................................................8

,- Connecting CaNeTV........................................................................9

,- Viewing the Connection Panel.........................................................10

[] Channel Menu ............................................................................. 13

,- Managing Channels.........................................................................14

,- Configuring the Picture Menu................................ 16

,- Viewing Picture-in-Picture................................................................20

! UsingYour TV as a Computer (PC) Displa} ....................................2!

•"Settingup the TV with your PC........................................................22

"Configuring the Sound Menu...........................................................23

" Configuring the Setup Menu ............................................................25

,- Setting the Time...............................................................................28

,- Network Connection ........................................................................30

,- Setting the Network .........................................................................33

,- Input Menu.......................................................................................36

,- Support Menu..................................................................................36

,- Connecting a USB Device...............................................................38

,- Media Pla_Function........................................................................39

,- Sorting the Photo List................................................................... 41

•-PhotoList C;tionMenu...................................................................42

,- Wewlnga Photo or Slide Sho.......................................................... 43

,- Slide ShowOption Menu................................... 44

" ConnectingAnynet+ Devices.......................................................... 55

" SettingUpAnynet+ ........................................................................ 56

" SwitchingbetweenAnynett Devices...............................................56

,- Recording........................................................................................57

,- Listening through a Receiver (HomeTheater)................................. 57

,- Troubleshooting for Anynet÷............................................................58

,- Using InfoLink................................................................................ 59

,- Using the Weather Service ............................................................ 59

,- Using the News Service .............................................................. 60

,- Using the Stock Service ..................................................................60

mEInfoLinkSetu;c.................................................................................61

,- Troubleshooting ...............................................................................62

,- Installingthe Stand..........................................................................63

,- Disconnectingthe Stand................................................................ 63

,- Assembling the Cables.................................................................. 64

,- Wall Mount KitSpecifications (VESA) .............................................64

,- Anti-Theft Kensington Lock .............................................................65

,- Securingthe InstallationSpace.......................................................65

,- Securingthe TV to a Wa I or Cabine[ .............................................66

,- Specifications ..................................................................................67

•- Dimensions......................................................................................71

J License

$R$(0) TruSurround HD. SRS and (,) symbol are trademarks of SRS Labs. tnc. TruSurround HD

technology is _ncorporated under license from SRS Labs. Inc.

[I] OOLBY Manufactured under license from Dolby Laboratories. Dotby and the double-D symbol are

oIr;|TAL trademarks of Dolby Laboratories.

DivX® Certified to play DivX® video, including premiumcontent.

Symbol

!

Press Note One-Touch Button TOOL Button

E.g:Hsh,_l

I

Touse your TV, you first have to set it up to suit your environment.

Figures and illustrations inthis User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice inorder to enhance product performance.

List of Features

• Adjustable picture settings that can be stored in the TV's memory.

• Automatic timer to turn the TV on and off.

• Aspecial sleep timer.

• Excellent Digital Interface & Networking : With a built-in HD digital tuner, nonsubscription HD broadcasts can beviewed with
no Cable Box/Satellite receiver (Set-Top Box) needed.

• HDMI/DVl connection of your PC to this TV.

• Excellent Picture Quality

• SRS TruSurround HD provides a virtual surround system.

• Media Play:Allows you to play music files, pictures, and movies saved on a USB.

Accessories

Remote control (BN59,00853A)Power Cord Cleaning Cloth

& Batteries (AAA x2) (3903-000144) (BN63-01798B)

(M4xL16)

warran _ card] Holder,wire Cable TV-Holder & screw (xi)

ty (BN61'05596A)(BN96,10788A)

Safety Guide

(M4xL16)

+=°==+=°_7+°=stan+dscrew (x4i(6002-001294)_:_:_ _+=+_++=+=_ cover_.+Bottom

LN37B650, LN40B630, LN46B630, LN52B630, (LN32B650: BN63-05284A, LN37B650: BN63-05285A)

LN40B640 LN46B640 (LN40B630; BN63-05286A LN46B630: BN63.05287A

Stand Screw (XS) (6002,001294)(LN40B640: BN63-05385A, LN46B640: BN63-05254A;

LN32B650 LN55B640: BN63-05452A)

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
The items color and shape may vary depending onthe model.

(Depending onthe model) (Depending on the model)

LN52B630: BN63.05478A)

Viewing the Control Panel

The product color and shape may vary depending on the model.
The front panel buttons can beactivated by touching them with your finger.

LN32B650, LN37B650

LN40B630, LN46B630, LN52B630

LN40B640, LN46B640, LN55B640

SOURCE MENU - VOL + v CH ^ _ fl_ |

__._J . s%cE_voL+ CL_'_/ vc.^ MENU]

SOURCE

MENU _,

o0

+

VOL_

^

_0

]

]

1

SaMS_N_

0 0 (POWER): Press to turn the TV on and off.

POWER INDICATOR: Blinks andturns offwhen the power is on and lights up instand-by mode.
V CH A: Press to change channels. Inthe on-screen menu, use the V CH A buttons as you would use the T and A

buttons on the remote control.

O =VOL+: Press to increase or decrease the volume. In the on-screen menu, use the =VOL+ buttons as you would use the

and 1_buttons onthe remote control.

MENU: Press to see an on-screen menu of your TV's features.
SOURCE C,,J:Toggles between all the available input sources. In the on-screen menu, use this button as you use the

ENTERI:B# button on the remote control.

O REMOTE CONTROL SENSOR: Aim the remote control towards this spot onthe TV.
0 SPEAKERS

Viewing the Remote Control

You can use the remote control up to a distance of about 23 feet from the TV.
The performance of the remote control may be affected by bright light.

The product color and shape may vary depending on the model.

O POWER : Turns the TV on and

off.
TV : Selects the TV mode

directly.

O NUMERIC BUTTONS :Press to

change the channel.

O [_]: Press to select additional

channels (digital) being
broadcast by the same station.
For example, to select channel

'54-3', press '54', then press '[_]'
and '3'.

=VOL+ :Press to increase or
decrease the volume.

O SOURCE: Press to display

and select the available video

sources.

CH LIST : Used to display
Channel Lists on the screen.

O TOOLS : Useto quickly select

frequently used functions.

O INFO.L : Press to use the News,

Stock Market and Weather
Forecast information services

available over Samsung's
network.

_) COLOR BUTTONS : Use these

buttons in the Channel list,
Media Play menu, etc.

MEDIA.P: Allows you to play
music files, pictures, and movies.

li_ INFO: Press to display

information on the TV screen.

t_) MTS: Press to choose stereo,

mono or Separate Audio Program
(SAP broadcast).

Use these buttons inthe Media
Play and Anynet + modes. ([_]:

This remote can be used to
control recording on Samsung

recorders with the Anynet +
feature)

_) ON/OFF _: Pressing the

ONIOFF F_q light button toggles

between on and off.When the
remote control is on, and a button
is pressed on the remote control,

the remote control buttons will

be litfor a moment. (Using the
remote control with the ON/OFF

light button set to On will

reduce the battery usage time.)

PRE-CH : Enablesyou to return
to the previous channel you were
watching.

MUTE _ : Press to temporarily
cut off the sound.

t_) v CH A :Press to change

channels.

_) MENU : Displays the main on-

screen menu.

FAV.CH: Press to switch to your
favorite channels.

RETURN : Returns to the

previous menu

_) UPA 1DOWNY/LEFT_ 1

RtGHT_. /ENTER _',J: Use to
select on-screen menu itemsand

change menu values.

EXIT : Press to exit the menu.

_) SRS: Selects SRS TruSurround

HD mode.

Q P.SIZE: Picture size selection.

CO: Controls the caption
decoder.

@--

@-

._

Installing Batteries in the Remote Control

1,

Lift the cover at the back of the remote control upward as shown in the figure.

2.

Install two AAA size batteries.

Make sure to match the '+' and '-' ends of the batteries with the diagram inside
the compartment.

3,

Replace the cover.

Remove the batteries andstore them in a cool, dry place if you won't be using the
remote control for a long time. (Assuming typical TV usage, the batteries should

last for about one year.)
If the remote control doesn't work, check the following:

- Is the TV power on?

- Are the plus and minus ends of the batteries reversed?

- Are the batteries drained?

- Is there a power outage or isthe power cord unplugged?

- Is there a special fluorescent light or neon sign nearby?

Viewing the menus

Before using the TV,follow the steps below to learn how to navigate the menu inorder to select and adjust different functions.

MENLIButton I v_-°_ _L_ I

Display the main on-screen menu. @__ I

'_, _ RETURN Button

Move the cursor and select an item. Select

the currently selected item. Confirm the

ENTER_/DIRECTION Button- ___ Return to the previous menu.

setting. EXIT

[] Operation the OSD (On Screen Display)

The access step may differdepending on the selected menu.

1. Press the MENU button.

2. The main menu appears on the screen. The menu's left side has icons• Picture, Sound,

Channel, Setup, input, Application, Support.

3. Press the A. or T button to select one of the icons.

Exitthe on-screen menu.

4. ThenpresstheENTERIB_buttontoaccesstheicon'ssub-menu.

6. PresstheAorTbuttontoselecttheicon'ssubmenu.

6.

Press the _ or _. button to decrease or increase the value of a particular item. The
adjustment OSD may differ depending on the selected menu.

7. Press the ENTER _ button to complete the configuration. Press the EXtTbutton to exit.

Help icon

Plug & Play Feature

When the TV is initially powered on, basic settings proceed automatically and subsequently.

1. Press the POWER (b button onthe remote control.
You can also use the POWERO button on the TV.

The message Select Language of the OSD. is displayed.

2. Press the ENTERIB,_ button. Press the A or T button to select the language, then press

the ENTERIB,_ button. The message Select 'Home Use' when installing this TV in
your home. is displayed.

3. Press the _ or _. button to select Store Demo or Home Use, then press the ENTER _,_

button. The message Select the Antenna source to memorize, is displayed.

We recommend setting the TV to Home Use mode for the best picture in your home
environment.

Stere Dome mode is only intended for use in retail environments.
If the unit is accidentally set to Store Demo mode andyou want to return to Home Use (Standard): Press the volume

button on the TV.When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.

4. Press the A or T button to memorize the channels of the selected connection. Press the ENTER_ button to select Start.
Air: Air antenna signal. / Cable: Cable antenna signal. / Auto: Air and Cable antenna signals.
In Cable mode, you can select the correct signal source among 8TD, HRC, and IRC by pressingthe A., T, 4 or I_

button, then press the ENTERIB,# button. If you have Digital cable, select the cable system signal source for bothAnalog
and Digital. Contact your local cable company to identify the type ofcable system that exists in your particular area.

6. Press the ENTERIB,# button to select Start. The TV will begin memorizing all of the available channels.
To stop the search before it has finished, press the ENTERIB,# button with Stop selected.

After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then
reappears. Press the ENTER _,_ button when channel memorization is complete. The message Set the Clock Mode. is
displayed.

6. Press the ENTERIB,# button. Press the A or T button to select Auto, then Press the ENTERIB,_ button. The message Set to

daylight saving time. is displayed. If you select Manual, Set current date and time, is displayed.

7. Press the A or T button to select Off, On or Auto, then press the ENTER _ button.

8. Press the A or _' button to highlight the time zone foryour localarea. Press the ENTER[E# button. If you have received a

digital signal, the time will be set automatically. Ifnot, refer to the 'Setting the Time' instructions to set the clock.
(see page 28)

9. The description for the connection method providing the best HD screen quality is displayed. Check the description and press

the ENTER _ button.

10. The message Enjoy your TV. is displayed. When you have finished, press the ENTER _ button.

If you want to reset this feature...

1. Press the MENU button to display the menu. Press the A or T button to select Setup,

then press the ENTER _ button.

2. Press the ENTERE}# button again to select Plug & Play.

The Plug & Play feature is only available in the TV mode.

Connecting VHF and UHF Antennas

If your antenna has a set of leads that look like the diagram to the right, see 'Antennas with 300
O Flat Twin Leads' below.

If your antenna has one lead that looks like the diagramto the right, see 'Antennas with 75 O
Round Leads'.

If you have two antennas, see 'Separate VHF and UHF Antennas'.

Antennaswith 300Q FlatTwinLeads

If you are using an off-air antenna (such asa roof antenna or 'rabbit ears') that has 3000 twin

flat leads, follow the directions below.

1. Place the wires from the twin leads under the screws on a 300-75 O adapter (not

supplied). Use a screwdriver to tighten the screws.

2. Plug the adaptor into the ANT IN terminal on the back of the TV.

Antennaswith 75 Q RoundLeads

PlugtheantennaleadintotheANTINterminalonthebackof theTV.

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine
the two antenna signals before connecting the antennas to the TV.This procedure requires an
optional combiner-adaptor (available at most electronics shops).

1. Connect both antenna leads to the combiner.

2. Plug the combiner into the ANT INterminal on the bottom of the rear panel.

Connecting Cable TV

Toconnect to a cableTV system,follow the instructions below.

Cablewithout aCableBox

Plug the incoming cable into the ANT IN terminal on the back ofthe TV.

Because this TV is cable-ready, you do not need a cable box to view unscrambled cable
channels.

Connecting to a Cable Box that Deserambles All Channels

1. Find the cable that is connected to the ANT OUT terminal on your cable box.
This terminal might be labeled 'ANT OUT', 'VHF OUT' or simply, 'OUT'.

2. Connect the other end of this cable to the ANT IN terminal on the back of the TV.

Connecting to a Cable Box that Deserambles Some Channels

If your cable box descrambles only some channels (such aspremium channels), follow the instructions below. You will need a two-

way splitter,an RF (A/B) switch and four lengths of RF cable. (These items are available at most electronics stores.)

ANTIN

Incoming cable I CA_E

_m /J

RF{NB) Switch

Cabb Box

1. Find and disconnect the cable that is connected to theANT IN terminal onyour cable box.
This terminal might be labeled 'ANT IN', 'VHF IN' or simply, 'IN'.

2. Connect this cable to a two-way splitter.

3. Connect an RF cable between the OUTPUT terminal on the splitter and the IN terminal on the cable box.

4. Connect an RF cable between the ANT OUT terminal on the cable box and the B-IN terminal onthe RF(A/B) switch.

6. Connect another cable between the other OUT terminal onthe splitter and theA-IN terminal on the RF (A/B) switch.

6. Connect the last RF cable between the OUT terminal onthe RF(A/B) switch and the ANT INterminal on the rear of the TV.

After you have made this connection, set theA/B switch to the 'A'position for normal viewing. Set the A/B switch to the 'B'
position to view scrambled channels. (When you set the A/B switch to 'B', you will need to tune your TV to the cable box's
output channel, which is usually channel 3 or 4.)

Viewing the Connection Panel

The product color and shape may vary depending on the model.

Rear Panel

O POWER INPUT

Connects the supplied power cord,

The location of the POWER INPUT may be different depending on its model.

HDMI iN I(DVI), 2, 31DVt AUDIO iN [R-AUDIO-L]
Connects to the HDMI jack of a device with an HDMI output.

No sound connection is needed for an HDMIto HDMI connection.
What is HDMI?

- HDMl(High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and video
signals using a single cable.

- The difference between HDMI and DVl is that the HDMI device is smaller insize and has the HDCP (High Bandwidth
Digital Copy Protection) coding feature installed.

The TV may not output sound and pictures may be displayed with abnormal color when DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box)supporting HDMI versions older than 1.3 are connected.When connecting an older HDMI
cable and there is no sound, connect the HDMI cable to the HDMI IN I(DVl) jack and the audio cables to the DVl AUDIO
IN JR-AUDIO-L] jacks on the back of the TV. Ifthis happens, contact the company that provided the DVD / Blu-ray player /
Cable Box / Satellite receiver (Set-Top Box) to confirm the HDMI version, then request an upgrade.

HDMI cables that are not 1.3 may cause annoyingflicker or no screen display.
Use the HDMI IN I(DVl)jack for DVl connection to an external device. Usea DVl to HDMI cable or DVI-HDMI adapter
(DVl to HDMI) for video connection andthe DVl AUDIO IN [R-AUDIO-L] jacks for audio. When using an HDMI / DVl cable

connection, you must use the HDMI IN I(DVl)jack.

O ANT iN

Connects to an antenna or cable TV system.

Cable Television

Network

1

or

L

O KENSINGTON LOCK

The Kensington Lock (optional) is a device used to physically fix the system when usedin a public place. If you want to use a
locking device, contact the dealer where you purchased the TV.

The location of the Kensington Lock may be different depending on its model.

O COMPONENT IN 1, 2 /AV IN 1

Connects Component video / audio.
The COMPONENT IN 1jack is also used as the AV iN 1jack.

Connect the video cable to the COMPONENT iN 1 [YNIDEO] jack and the audio cable to the COMPONENT iN 1 [R-
AUDIO-L] jacks.
If you have a 'mono' (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio inputjacks

of the TV.Alternatively, connect the cable to the 'R' jack. If your VCR is stereo, youmust connect two cables.
When connecting toAV iN 1, the color of the AV iN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable

(Yellow).

O PC iN [PC] / (AUDIO)

Connects to the video andaudio output jacks on your PC.

If your PC supports an HDMI connection, you can connect this to the HDMmiN I(DVl), 2, 3 or 4 terminal.
If your PC supports a DVI connection, you can connect this to the HDMmiN I(DVm)/ DVmAUDIO IN JR-AUDIO-L] terminal.

DIGITAL AUDIO OUT (OPTICAL)
Connects to a Digital Audio component such as a Home theater receiver.

When a Digital Audio System is connected to the DiGiTAL AUDIO OUT (OPTICAL) jack: Decrease the volume of the TV
and adjust the volume level with the system's volume control.

5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
When the Home Theater receiver is setto On, you can hear sound output from the TV's Opticaljack. Whenthe TV is

displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a
digital component such as a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) and is connected to the
TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver. If you want to hear 5.1 channel audio,
connect the digital audio out jack on DVD / Blu-ray player / Cable Box / Satellite receiver (Set-TopBox) directly to an
Amplifier or HomeTheater, not the TV.

O EX-LINK

Connectorforserviceonly.

O AUDIOOUT

Connectstotheaudio input jacks on your Amplifier/Home theater.

When an audio amplifier is connected to the AUDIO OUT JR-AUDIO-L]jacks: Decrease the volume of the TV and adjust
the volume level with theAmplifier's volume control.

@ LAN

Connecta LAN cabletothisporttoconnecttotheNetwork.

Side Panel

For devices frequently connected/disconnected from your TV, it is convenient to use the jacks on the side of your TV (e.g.
Camcorder).

o o

@

0 0

;_,iiiiii_i,!_i,!!,_!i!!i!i!ii!i!i!iiiiii!i!ii_'i'

O

i!i!ii!iiiii!ii!ilii i i i'i i i i

O USBI(HDD)/ USB2

Connector for software upgrades and Media Play, etc. You can connect to Samsung's network wirelessly using the 'Samsung
Wireless LAN Adapter' (Sold separately).

For USB HDD, use the USBI(HDD) port.

0 HDMI IN 4

Connect to the HDMIjack of a device with HDMI output.

O AV IN 2 [VIDEO] / [R-AUDIO-L]

Video and audio inputs for external devices, such as a camcorderorVCR.

YoucanconfigurevarioussettingsforyourTVchannelswithfeaturessuchasAutoProgram,FavoriteChannels,andSignal
Strength.

Channel Menu

[]

Antenna -_ Air / Cable
Before your television can begin memorizing the available channels, youmust specify the type

of signal source that is connected to theTV (i.e. anAir or a Cable system).

__ Press the TOOLS button to display the Tools menu. You can also set the Antenna by

selecting Tools _ Switch to Cable (or Switch to Air).

[]

Auto Program

Air: Air antenna signal, / Cable: Cable antenna signal. / Auto: Air and Cable antenna

signals

When selecting the Cable TV system: Selects the cable system. STD, HRC and IRC identify various types of cable TV
systems. Contact your local cable company to identify the type of cable system that exists in your particular area.At this point
the signal source has been selected.

After all the available channels are stored, it starts to remove scrambled channels (Removing scrambled channel). The Auto
program menu then reappears.
If you want to stop Auto Programming, press the ENTERIB,_ button.The Stop Auto Program? message will be displayed.

Select Yes by pressing the 4 or _ button, then press the ENTERC_ button.

[]

Clear Scrambled Channel (digital channels only)
This function is used to filter out scrambled channels after Auto Program is completed. This process may take upto 20--30

minutes.

Tostop searching scrambled channels: Press the ENTER _ button to select Stop. Press the 4 button to select Yes, then
press the ENTERIB,_ button.

This function is only available in Cable mode.

[]

Channel List
For detailed procedures on using the Channel List,refer to the 'Managing Channels' instructions. (seepages 14~15)

You can select these options by simply pressing the CHLIST button on the remote control.

[]

Fine Tune (analog channels only)
Use fine tuning to manually adjust a particular channel for optimal reception.

If you do not store the fine-tuned channel inmemory, adjustments arenot saved.
'*' will appear next to the name offine-tuned channels.

To reset the fine tuning setting, press the T button to select Reset, then press the ENTER _,_ button.

Managing Channels

Using this menu, you can add / delete or set favorite channels and use the program guide for
digital broadcasts.

All Channels
Shows all currently available channels.

Added Channels
Shows all added channels.

Favorite

Shows all favorite channels.

Toselect the favorite channels youhave set up, press the FAV.CHbutton on the remote control.

Programmed
Shows all current reserved programs.

Select a channel inthe All Channels, Added Channels or Favorite screen by pressing the ,& / V buttons, and pressing the
ENTERIB,,Jbutton. Then you can watch the selected channel.

Using the color buttons with the Channel List

Red (Antenna): Switches to Air or Cable.
Green (Zoom): Enlarges or shrinks a channel number.

Yellow (Select): Selects multiple channel lists. You can perform the add/delete or add to Favorite/delete from Favorite
function for multiple channels at the same time. Select the required channels and press the yellow button to set all the
selected channels at the same time. The ..,/ mark appears to the left of the selected channels.

TOOLS (Tools): Displays the Add (or Delete), Add to Favorite (or Delete from Favorite), Timer Viewing, Channel
Name Edit, Select All (or Deseleet All) and Auto Program menus (The Options menus may differ depending on the
situation.)

Channel Status Display Icons

_/ : A channel selected by pressing the yellow button.

:A program currently being broadcast.

V :A channel set as a Favorite.
(_) :Areserved program.

Channel List Option Menu (in All Channels / Added Channels / Favorite)

Press the TOOLS button to use the option menu.
Option menu items may differ depending on the channel status.

Add / Delete
You can delete or add a channel to display the channels youwant.

All deleted channels will beshown on the All Channels menu.
Agray-colored channel indicates the channel has been deleted.

The Add menu only appears for deleted channels.
You can also delete a channel from the Added Channels or Favorite menu inthe same

manner.

AddtoFavorite / Delete from Favorite

You can set channels you watch frequently as Favorite.

_-_ Press the TOOLS button to display the Tools menu. You can also set the addto (or delete from) Favorites by selecting Tools

Add to Favorite (or Delete from Favorite).

The 'V' symbol will be displayed and the channel will be set as a favorite.
All favorite channels will be shown on Favorite menu.

Timer Viewing
If you reserve a program youwant to watch, the channel is automatically switched to the reserved channel in the Channel List;

even when you are watching another channel. To reserve a program, set the current time first.

Only memorized channels can be reserved.
You can set the channel, day, month,year, hour and minute directly by pressing the number buttons on the remote control.

Reserving a program will be shown in the Programmed menu.
Digital Program Guide andViewing Reservation
When a digital channel is selected, and you press the _ button, the Program Guide for the channel appears.You can reserve

a program according to the procedures described above.

Channel Name Edit (analog channels only)
Channels can labeled so thattheir callletters appear whenever the channel is selected.
@ The names of digital broadcasting channels are automatically assigned and cannot be labeled.

Select All I Deselect All
= Select All: You can select allthe channels inthe channel list.

• Deselect Alt: Youcan deselect all the selected channels.
You can only select Deselect All when there is a selected channel.

Auto Program

For detailed procedures on using the Auto Program, refer to the 'Channel Menu' instructions. (see page 13)

Channel List Option Menu (in Programmed)

You can view, modify or delete a reservation.

Press the TOOLS button to use the option menu.

Change Info

Select to change a viewing reservation.
Cancel Schedules

Select to cancel a viewing reservation.

information

Select to view a viewing reservation.
(Youcan also change the reservation information.)

Select All
Select all reserved programs.

Youcanconfigurevariouspictureoptionssuchasthepicturemode,aspectratio,andcolortosuityourpersonalpreferences.

Configuring the Picture Menu

[] Mode

You can select the type of picture which best corresponds to your viewing requirements.

_-_ Press the TOOLS button to display the Tools menu. You can also set the picture mode by

selecting Tools _ Picture Mode.

Dynamic

Selects the picture for increased definition in a bright room.
Standard

Selects the picture for the optimum display in a normal environment.

Natural

Selects the picture for an optimum and eye-comfortable display.

Natural is not available inPC mode.

Movie

Selects the picture for viewing movies in a dark room.

[]

Backlight / Contrast / Brightness / Sharpness / Color / Tint(G/R)
Yourtelevision has several setting options that allow you to control the picture quality.

• Backlight: Adjusts the brightness of LCD back light.

• Contrast: Adjusts the contrast level of the picture.

• Brightness: Adjusts the brightness level of the picture

• Sharpness: Adjusts the edge definition of the picture.

• Color: Adjusts color saturation of the picture.

• Tint(G/R): Adjusts the color tint of the picture.
When you make changes to Backlight, Contrast, Brightness, Sharpness, Color or Tint(GIR) the OSDwill be adjusted

accordingly.
In PC mode, youcan only makechanges to Backlight, Contrast and Brightness.

Settings can beadjusted and stored for each external device you have connected to an input of the TV.
The energy consumed during usecan be significantly reduced ifthe brightness level of the picture is lowered, which will

reduce the overall running cost.

[]

Advanced Settings
Samsung's new TVs allow you to make even more precise picture settings than previous

models.

Advanced Settings is available in Standard or Movie mode.
In PC mode, youcan only makechanges to Dynamic Contrast, Gamma and White
Balance from among the Advanced Settings items.

Black Tone -_ Off / Dark / Darker / Darkest
You can select the black level on the screen to adjust the screen depth.

DynamicContrast _ Off / Low / Medium / High

You can adjust the screen contrast so that the optimal contrast is provided.

Gamma

You can adjust the primary color (red, green, blue) intensity.
Color Space

Color space is a color matrix composed of red, green and blue colors. Selectyour favorite color space to experience the most
natural color.

• Auto: Auto color space automatically adjusts to the most natural color tone based on program sources.

• Native: Native color space offers deep and rich color tone.

• Custom: Adjusts the color range to suit your preference.

Changing the adjustment value will refresh the adjusted screen.
Settings can be adjusted and stored for each external device you have connected to an input of the TV. For example, if

you have a DVD player connected to HDMI 1 and it is currently selected, settings and adjustments will be saved for the
DVD player.

- Color: Red, Green, Blue, Yellow, Cyan or Magenta
Color is available when Color Space is set to Custom.

InColor, you can adjust the RGB values for the selected color.

To reset the adjusted RGB value, select Reset.

- Red: Adjusts the red saturation level of the selected color.

- Green: Adjusts the green saturation level of the selected color.

- Blue: Adjusts the blue saturation level of the selected color.

- Reset: Resets the color space to the default values.

White Balance

You can adjust the color temperature for more natural picture colors.

• R-Offset: Adjusts the red color darkness.

• G-Offset:Adjusts the green color darkness.

• B-Offset: Adjusts the blue color darkness.

• R-Gain: Adjusts the red color brightness.

• G-Gain:Adjusts the green color brightness.

• B-Gain: Adjusts the blue color brightness.

• Reset: The previously adjusted white balance will be reset to the factory defaults.
Flesh Tone

You can emphasize the pink 'flesh tone' in the picture.

Changing the adjustment value will refresh the adjusted screen.

Edge Enhancement _ Off / On
You can emphasize object boundaries in the picture.

xvYCC -, Off / On
Setting the xvYCC mode to on increases detail and color space when watching movies from an external device (ie. DVD player)

connected to the HDMI or Component IN jacks.

xvYCC is available when the picture mode is set to Movie, and the external input is set to HDMI or Component mode.

[]

Picture Options

In PC mode, youcan only makechanges to the Color Tone and Size from among the
items in Picture Options.

Color Tone _ Cool / Normal 1Warm1 / Warm2 1Warm3
@ Warm1, Warm2 or Warm3 is only activated when the picture mode is Movie.
@ Settings can be adjusted and storedfor each external device you have connected to an

input ofthe TV.

Size
Occasionally, you may want to change the size of the image on your screen. Your TV comes

with several screen size options, each designed to work best with specific types of video input. Yourcable box/satellite receiver

may have its own set of screen sizes as well. In general, though, you should view the TV in 16:9 mode as much as possible.

Alternately, you can press the P.SiZEbutton on the remote control repeatedly to change the picture size.

• 16:9 : Sets the picture to 16:9wide mode.

• Zoom1: Magnifies the size of the picture on the screen.

• Zoom2: Magnifies the size of the picture more than Zoom1.

• Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen.

• 4:3 : Sets the picture to 4:3 normal mode.

• Screen Fit: Use the function to seethe full image without any cutoff when HDMI (720p/108Oi/108Op),Component
(1080i/I080p) or DTV (1080i) signals are input.

16:9 Zoom1 Zoom2

Wide Fit 4:3 Screen Fit

%

When Double ([_], H) mode has been set in PIP,the Picture Size cannot be set.

%

Temporary image retention may occur when viewing a static image on the set for more than two hours.

%

After selecting Zoom1, Zoom2 orWide Fit: Press the _. buttonto Select Position, then press the ENTER[E# button. Press
the A or • button to move the picture up and down. Then press the ENTER[E_ button. Press the _- button to Select Size,
then press the ENTER[E_ button. Press the A or T button to magnify or reduce the picture size inthe vertical direction. Then
press the ENTER _ button.

%

After selecting Screen Fit in HDMI (1O80i/1O8Op)or Component (1O80i/108Op)mode, you made need to center the picture:
Press the _ or _. button to select Position, then press the ENTER _ button. Press the A, T, 41or _. button to move the
picture.

Reset: Press the _ or _- button to select Reset, then press the ENTER[B_ button. You can initialize the setting.

%

HD (High Definition): 16:9 - 1O80i/1O8Op(1920xi080), 720p (1280x720)

%

Settings can beadjusted and stored for each external device you have connected to an input of the TV.

Input Source Picture Size
ATV,AV, Component (480i, 480p) 16:9, Zoornl, Zoom2, 4:3

DTV(1080i), Component (1080i, 1080p), 16:9, 4:3, Wide Fit, Screen Fit
HDMI (720p, 1080i, 1080p)

PC 16:9, 4:3

DigitalNR-,Off / Low / Medium I High / Auto

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static
and ghosting that may appear on the screen.

When the signal is weak, select one of the other options until the best picture isdisplayed.

HDMi Black Levet -_ Normal / Low
You can select the black level on the screen to adjust the screen depth.

This function is active only when an external device is connected to the TV via HDMI.The HDMI Black Level function may not
be compatible with all external devices.

Film Mode -_ Off/Auto1/Auto2

The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality.

Film Mode is supported in TV, Video, Component (480i/1080i) and HDMI (480i/I080i).

• Off: Turns the FilmMode function off.

• Auto1: Automatically adjusts the picture for the bestquality when watching afilm.

• Auto2: Automatically optimizes the video text on the screen (not including closed captions) when watching a film.

Blue Only Mode _ Off / On
This function is forAV device measurement experts. This function displays the blue signal only by removing the red and green

signals from the video signal so as to provide a Blue Filter effect that is used to adjust the color and Tint of video equipment such
as DVD players, Home Theaters, etc. Using this function, you can adjust the color and Tint to preferred values appropriate to
the signal level of each video device using the Red / Green / Blue / Cyan/ Magenta /Yellow color Bar Patterns, without using an

additional Blue Filter.
@ Blue Only Mode is available when the picture mode is set to Movie or Standard.

Auto Motion Plus 120Hz _ Off I Clear / Standard / Smooth / Custom / Demo
Removes drag from fast sceneswith a lot of movement to provide a clearer picture.

if youenable Auto Motion Plus 120Hz, noise may appear on the screen. If this occurs, set Auto Motion Plus 120Hz to Off.

• Off: Switches Auto Motion Plus 120Hzoff.

• Clear: Sets Auto Motion Plus 120Hz to minimum.

• Standard: Sets Auto Motion Plus 120Hz to medium.

• Smooth: SetsAuto Motion Plus 120Hz to maximum.

• Custom: Adjusts the blur andjudder reduction level to suit your preference.

Blur Reduction: Adjusts the blur reduction levelfrom video sources.
Judder Reduction: Adjusts the judder reduction level from video sourceswhen playing films.

Reset: Reset the custom settings.

• Demo: Displays the difference between Auto Motion Plus 120Hz on and off modes.

[] Picture Reset -_ Reset Picture Mode / Cancel

Resets all picture settings to the default values.

Reset Picture Mode: Current picture values return to default settings.

Viewing Picture-in-Picture

You can use the PIP feature to simultaneously watch the TV tuner and one external video
source. This product has one built-in tuner, which does not allow PIP to function inthe same
mode. Please see 'PIP Settings' belowfor details.

_-_ Press the TOOLS button to display the Tools menu. You can also configure PIPrelated

settings by selecting Tools _ PIP.
If you select the PIPpicture sound, refer to the 'Configuring the Sound Menu' instructions.

(see page 24)
PiP Settings

_=:'_Main picture .........._8_ub=pi_ct_ure..............................

Component 1, 2
HDMII/DVI, HDMI2, HDMI3, HDMI4 TV

PC

While V-Chip is in operation, the PiP function cannot be used.
If you turn the TV off while watching inPIP mode andturn it on again, the PIP window will disappear.

You may notice that the picture in the PIPwindow becomes slightly unnatural when you use the main screen to view a game
or karaoke.

[] PiP _ On / Off

Youcanactivateor deactivatethe PiPfunction.

Size _ _ l [_;_ l H l _
You can select a size of the PIP-picture.

Position _ [_ / _ 1_ / C_
You can select a position of the PIP-picture.

In Double (_], H) mode, Position cannot be selected.

AidCable _ Air / Cable
Select eitherAir or Cable as the input source for the sub-screen.

Channel

You can select the channel for the sub-screen.

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP)

The Windows display-settings for a typical computer are shown below. The actual screens on
your PC will probably be different, depending upon your particular version ofWindows and

your particular video card. However, even if your actual screens look different, the same basic
set-up information will apply in almost all cases. (If not, contact your computer manufacturer or

Samsung Dealer.)

1. First, click on 'Control Panel'on the Windows start menu.

2. Whenthe control panel window appears, click on 'Appearance and Themes' and a display
dialog-box will appear.

3. Whenthe control panel window appears, click on 'Display' anda display dialogbox will
appear.

4. Navigate to the 'Settings' tab on the display dialog-box.

• The correct size setting (resolution) - Optimum: 1920 X 1080 pixels

• If a vertical-frequency option exists on your display settings dialog box, the correct
value is '60'or '60 Hz'. Otherwise, just click 'OK' and exit the dialog box.

Display Modes

If the signal from the system equals the standard signal mode, the screen is adjusted automatically. Ifthe signal from the system
doesn't equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no

video. For the display modes listed below, the screen image has been optimized during manufacturing.
D-Sub and HDMIIDVI Input

When using an HDMI / DVI cable connection, you must use the HDMI IN I(DVl) jack.

IBM

MAC

VESA CVT

VESA DMT

VESA GTF

VESA DMT /

DTV CEA 1920x I080p 67.500 60.000 148.500 +/+

640 x 350
720 x 400

640 x 480

832 x 624

1152x 870

720 x 576
1152x 864
1280x 720
1280x 720
1280x 960

640 x 480

640 x 480

640 x 480

800 x 600

800 x 600

800 x 600
1024x 768
1024x 768
1024x 768

1152x 864

1280x 1024
1280x 1024

1280x 800
1280x 800

1280x 960
1360x 768
1440x 900
1440x 900

1680x 1050

1280x 720

1280x 1024

31.469

31.469

35.000

49.726

68.681

35.910

53.783

44.772

56.456

75.231

31.469

37.861

37.500

37.879

48.077

48.875

48.363

56.476

60.023

67.500

63.981

79.976

49.702

62.795

60.000

47.712

55.935

70.635

65.290

52.500

74.620

70.086

70.087

66.667

74.551

75.062

59.950

59.959

59.855

74.777

74.857

59.940

72.809

75.000

60.317

72.188

75.000

60.004

70.069

75.029

75.000

60.020

75.025

59.810

74.934

60.000

60.015

59.887

74.984

59.954

70.000

70.000

25.175

28.322

30.240

57.284

100.000

32.750

81.750

74.500

95.750

130.000

25.175

31.500

31.500

40.000

50.000

49.500

65.000

75.000

78.750

108.000

108.000

135.000

83.500

106.500

108.000

85.500

106.500

136.750

146.250

89.040

128.943

+/-

-/+

-/-

-/-

-/-

-/+

-/+

-/+

-/+

-/+

-/-

-/-

-/-

+/+
+/+
+/+

-/-

-/-

+/+
+/+
+/+

+/+

-/+

-/+

+/+
+/+

-/+

-/+

-/+

-/+

-/-

Setting up the TV with your PC

Preset: Press the SOURCE button to select PC mode.

[]

Auto Adjustment

Use the Auto Adjust function to have the TV automatically adjust the video signals it receives.
The function also automatically fine-tunes the settings and adjusts the frequency values and

positions.

_-_ Press the TOOLS button to display the Tools menu. You can also set the AutoAdjustment

by selecting Tools _ Auto Adjustment.
This function does notwork in DVI-Digital mode.

[] Screen

Coarse / Fine

The purpose of picture quality adjustment is to remove or reduce picture noise. Ifthe noise is
not removed by Fine-tuning alone, then adjust the frequency asbest as possible (Coarse) and

Fine-tune again. After the noise has been reduced, readjust the picture sothat it is aligned on
the center of screen.

PC Position

Adjust the PC's screen positioning if itdoes notfit the TV screen.

Press the A or T button to adjusting the Vertical-Position. Pressthe 4 or i_ button to adjust
the Horizontal-Position.

Image Reset
You can replace all image settings with the factory default values.

Youcanconfigurethesoundmode,volume,multi-tracksoundoptions,etc.

Configuring the Sound Menu

[]

Mode _ Standard / Music / Movie / Clear Voice / Custom

_-_ Press the TOOLS button to display the Tools menu. You can also setthe sound mode by

selecting Tools _ Sound Mode.

• Standard: Selects the normal sound mode.

• Music: Emphasizes music over voices.

• Movie: Provides the best sound for movies.

• Clear Voice: Emphasizes voice over other sounds.

• Custom: Recalls your customized soundsettings.

[]

Equalizer

The sound settings can be adjusted to suit your personal preference.

• Mode: Selects the sound mode among the predefined settings.

• Balance L/R:Adjusts the balance between the right and left speaker.

• 100Hz / 300Hz / IKHz / 3KHz/ 10KHz (Bandwidth Adjustment): To adjust the level of different bandwidth frequencies.

• Reset: Resets the equalizer settings to the default values.

[]

SRS TruSurround HD _ Off/On
SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two

speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system,
including internal television speakers. It is fully compatible with all multichannel formats.

_-_ Press the TOOLS button to display the Tools menu. You can also set the SRSTruSurround HD by selecting Tools _ SRS TS

HB.

[]

Preferred Language (digital channels only)
DigitaI-TV broadcasts are capable of simultaneous transmission of many audiotracks (for example, simultaneous translations of

the program intoforeign languages).

You can listen in a language other than the Preferred Language by pressing the MTS button on the remote control.
Preferred Language is available only in Digital TV mode.

You can only select the language from among the actual languages being broadcast.

[] Multi-Track Sound (MTS) (analog channels only)

Press the MTS button onthe remote control repeatedly to select Mono, Stereo or SAP.

• Mono: Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal.

• Stereo: Choose forchannels that are broadcasting in stereo.

• SAP: Choose to listento the Separate Audio Program, which is usually a foreign-language translation.
Multi-Track Sound is available only in Analog TV mode.
Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP.

[]

Auto Volume -_ Off/On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is

changed. This feature lets you automatically adjust the volume ofthe desired channel by lowering the sound output when the
modulation signal is high or by raising the sound output when the modulation signal is low.

[]

Speaker Select
When you watch TV with itconnecting to a Home theater, turn the TV speakers off so you can listen to sound from the Home

theater's (external) speakers.

• External Speaker: Used to listen to the sound ofthe External (Home Theater) Speakers.

• TV Speaker: Used to listen to the sound of the TV Speakers.
The volume and MUTE buttons do not operate when the Speaker Select isset to External Speaker. Please set the volume

on your Home theater.
If you select External Speaker inthe Speaker Select menu, the sound settings will be limited

Mute

[]

Sound Select -_ Main / Sub
When the PIP feature is activated, you can listento the sound of the sub (PIP) picture.

You can select this option when PIP is set to On.

_-_ Press the TOOLS button to display the Tools menu. You can also set the sound of the sub picture by selecting Tools _ PIP

Sound Select.

[]

Sound Reset -_ Reset All / Reset Sound Mode / Cancel
You can restore the Sound settings to the factory defaults.

Reset Sound Mode: Current sound values return to default settings.

Youcansetupadditionalfunctions.

Configuring the Setup Menu

[]

Language

You can set the menu language.

[]

Time
For detailed procedures on setting up options, refer to the 'Setting the Time' instructions.

(see pages 28~29)

[]

Game Mode _ Off / On
When connecting to a game console such as PlayStation TM or Xbox TM, you can enjoy a more realistic gaming experience by

selecting game menu.

Restrictions on game mode (Caution)

To disconnect the game console and connect another external device, set Game Mode to Off inthe setup menu.
If you display the TV menu in Game Mode, the screen shakes slightly.

Game Mode is not available in regular TV and PC mode.
While PiP is in operation, the Game Mode function cannot be used.
If the picture is poor when external device is connected to TV, check if Game Mode is On. Set Game Mode to Off and

connect external devices.
If Game Mode is On:

Picture mode is automatically changed to Standard and cannot be changed.
Sound mode is automatically changed to Custom andcannot be changed. Adjust the sound using the equalizer.

The Reset Sound function is activated. Selecting the Reset function after setting the equalizer resetsthe equalizer
settings to the factory defaults.

[]

BD Wise _ Off / On
Provides the optimal picture quality for SAMSUNG DVD, Blu-ray and Home Theater products which support BD Wise. You can

enjoy a richer picture when using them connected to this Samsung TV.

Connect SAMSUNG products that have BD Wise using an HDMI cable.
When the BD Wise set to On, the picture mode is automatically changed to the optimal resolution.

BD Wise is available in HDMI mode.

[]

Network Type / Network Setup
Fordetailedproceduresonsettingupoptions,refertothe'SettingtheNetwork'instructions.(seepages30~35)

[] V-Chip

The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN
(personal ID number) before any of the V-Chiprestrictions are setup or changed.

V-Chip function is not available inHDMI, Component or PC mode.
The default PIN number of a new TV set is '0-0-0-0'

Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings.

Change PiN

The Change PINscreen will appear. Choose any 4 digits foryour PIN and enter them. As soon as the 4 digits are entered,
the Confirm New PIN screen appears. Re-enter the same 4 digits. When the Confirm screen disappears, your PIN has been

memorized.

If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to 0-0-0-0 : POWER
(off) _ MUTE _ 8 _ 2 _ 4 _ POWER (on).

V-ChipLock_ Off/ On

You can block rated TV Programs.

TV Parental Guidelines

You can block TV programs depending on their rating.This function allows you to control what
your children are watching.

• TV-Y: Young children / TV-YT: Children 7 and over / TV=G:General audience / TV-PG:
Parental guidance / TV-14: Viewers 14 and over/ TV-MA: Mature audience

• ALL: Lock all TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation / L:
Adult Language / D: Sexually Suggestive Dialog

The V-Chip will automatically block certain categories that are more restrictive. For
example, if you block TV-Y category, then TV-Y7 will automatically be blocked. Similarly,
if you block the TV-G category, then all the categories in the young adult group will be
blocked (TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (D, L, $, V) work together
similarly.

The V-chip will automatically block certain categories that are 'More restrictive'. For example, if you block L sub-rating in TV-
PC, then the L sub-ratings in TVo14and TV-MA will automatically be blocked.

MPAA Rating
You can block movies depending on their MPAArating. The Motion Picture Association of

America(MPAA) has implemented a rating system that provides parents or guardians with

advance information on which films are appropriate for children.

• G: General audience (no restrictions).

• PC: Parental guidance suggested.

• PG=13:Parents strongly cautioned.

• R: Restricted. Children under 17 should be accompanied by an adult.

• N0-17: No children under age 17.

• X:Adults only.

• NR: Not rated.
The V-Chip will automatically block anycategory that is 'More restrictive'. For example, if you block the PC-13 category, then

R, NC-17 and Xwill automatically be blocked also.

Canadian English

• C: Programming intended for children under age 8.

• C8+: Programming generally considered acceptable for children 8 years and over to watch on their own.

• G: General programming, suitable for all audiences.

• PG: Parental Guidance.

• 14+: Programming contains themes or content which may not be suitable for viewers under the age of 14.

• 18+:Adult programming.
The V-Chip will automatically block any category that is 'More restrictive'. For example, ifyou block G category, then PC, 14+

and 18+ will automatically be blocked also.

Canadian French

• G: General

• 8 arts+: Programming generally considered acceptable for children 8years and over to watch on their own.

• 13 arts+: Programming may not be suitable for children under the age of 13.

• 16 arts+: Programming is not suitable for children under the age of 16.

• 18 arts+: Programming restricted to adults.

@ The V-Chip will automatically block any category that is 'More restrictive'. For example, if you block 8 ans+ category, then 13

ans+, 16 ans+ and 18 ans+ will automatically be blocked also.