![](/html/9a/9a7f/9a7f9ac20a3dd2300cc8833200b1ec6ecf8659573ddb15f136c4f0ecbac3b5c1/bg1.png)
Contact 8AMSUNG WORLDWIDE
if you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Comuniquese con SAMSUNG WORLDWIDE
Si desea formular alguna pregunta o comentario en relaci6n con los productos de Samsung, comuniquese con el centro de
atenci6n al cliente de SAMSUNG.
Samsung Electronics Canada Inc., Customer
Service 55 Standish Court Mississauga,
CANADA 1-800-SAMSU NG(726-7864) www.samsung.com/ca
U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com/us 105 Challenger Road
Ontario L5R 4B2 Canada
Samsung Electronique Canada Inc., Service
& la Clientele 55 Standish Court Mississauga,
Ontario L5R 4B2 Canada
Samsung Electronics America, Inc.
Ridgefield Park, NJ 07660-0511
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!!
I
BN68-01883C-00
imagine the possibilities
Thank youfor purchasing this Samsung product.
To receive more complete service, please
register your product at
www.samsung.com/register
Model Serial No,
![](/html/9a/9a7f/9a7f9ac20a3dd2300cc8833200b1ec6ecf8659573ddb15f136c4f0ecbac3b5c1/bg2.png)
important Warranty information Regarding Television Format Viewing
See the warranty card for more information onwarranty terms.
Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen
format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to
fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images
on screen, such as the dark sidebars on nonexpanded standard format television video and programming, should belimited to no
more than 5% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station Iogos, web sites
or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that
exceed the above guidelines can cause uneven aging of LCD Displays that leave subtle, but permanent burned-in ghost images in
the LCD picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary
patterns or dark bars.
On LCD models that offer picture sizing features, use these controls toview different formats as afull screen picture.
Becareful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format selection
and use, as well as burned-in images, are not covered by your Samsung limited warranty.
U.S.A Only
The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties.
In particular, this product is licensed under the following USpatents: 5,991,715, 5,740,317, 4,972,484, 5,214,678, 5,323,396,
5,539,829, 5,606,618, 5,530,655, 5,777,992, 6,289,308, 5,610,985, 5,481,643, 5,544,247, 5,960,037, 6,023,490, 5,878,080,
and under US Published PatentApplication No. 2001-44713-A1.
This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for
commercial use. The license does not cover any product unit other than this product unit and the license does not extend to
any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with
this product unit. The license only covers the use of this product unit to encode and/or decode audio files conforming to the
ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not
conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
• Other countries
The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties.
This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for
commercial use. The license does not cover any product unit other than this product unit and the license does not extend to
any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with
this product unit. The license only covers the use of this product unit to encode and/or decode audio files conforming to the
ISO/IEC 11172-3or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not
conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung
Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG
will additionally provide Warranty Repair Service inthe United States on SAMSUNG products purchased in Canada, and
in Canada on SAMSUNG products purchased in the United States, for the warranty period originally specified, and to the
Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this
Statement, the Original LimitedWarranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the
Service Center. Transportation to and from the Service Center is the responsibility of the purchaser.
Conditions covered are limited only to manufacturing defects inmaterial orworkmanship, and only those encountered in
normal use of the product.
Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum
repair times, exchanges or replacements, accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free:
in the United States : 1-800-8AMSUNG (t-800-72G7864)
in Canada : 1-800-SAMSUNG
Precautions When Displaying a Still image
A still image may cause permanent damage to the TV screen
• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image
retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the
screen when displaying a still image.
• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left,
• Displaying still images from Video games and PC for longer than a certain period of time may produce partial a_r-images.
To prevent this effect, reduce the 'brightness' and 'contrast' when displaying still images.
© 2009 Samsung Electronics Co., Ltd.All rights reserved.
rightand center of the screen caused by the difference of light emission on the screen.
Playing a DVD or a game console may cause a similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
![](/html/9a/9a7f/9a7f9ac20a3dd2300cc8833200b1ec6ecf8659573ddb15f136c4f0ecbac3b5c1/bg3.png)
CONTENTS
•, Listof Features........................................................ 2 ,=Configuringthe Sound Menu..............................................21
,,Accessories 2
=Viewingthe ControlPanel....................................................3
•, Viewingthe ConnectionPanel................................ 4
gRemote Control....................................................... 5 ,,,Configuring theSetup Menu............................................ 22
•, installing Batteriesinthe RemoteControl.............. 5
=,ConnectingVHF and UHFAntennas...................... 6 =ConfiguringtheSupport Menu........................................ 26
,,,ConnectingCableTV ............................................. 6
=Connectinga DVDI Blu-rayplayert CableBoxI Satellitereceiver
Set-TopBox viaHDMI.............................................................7
-,Connectinga DVDt Blu-rayplayer/Cable Box/Satellite ==Usingthe Media Play(USB) Function............................. 27
receiver(Set-TopBox)via DVl.............................................8 ,=Usingthe Media Play(USB) Menu................................. 28
•=ConnectingaDVD/Blu-rayplayer/CableBox Satellitereceiver(Set-Top
Box)viaComponen[caoles....................................................................8
=Connecunga VCR................................................... c
=Connectinga DigitalAudioSystem ......................................9
•, ConnectinganAmplifiert DVDHomeTheater ...... 10
,,,Connectinga Camcorder........................................ 11
=Connectinga PC................................................................12
=,Viewing_nemenus.................................................. 13 =,Troubleshootingfor Anynet_...............................................35
=,Plug& Play Feature................................................. 14
=,Usingthe PHOTO CJPEG)List ...........................................28
=,Using the MP3 List ....................................................30
=,ConnectingAnynet+ Dewces ......................................... 32
=,Setting Up Anynet..................................................... 33
=,SwitchingbetweenAnynet+ Devices............................... 33
=,Recording ..........................................................................34
=,Listeningthrough a Receiver(Hometheater)................ 35
,,,Troubleshooting......................................................... 36
==WallMount Kit Specifications(VESA)............................ 38
=,Using the Anti-Theft Kensington Lock ............................. 38
=,Securingthe TV totheWall ................................................39
=Configuringthe Channel Menu...............................
=,Managing Channels................................................
=,Configuringthe PictureMenu.................................
=,UsingYourTV as a Computer(PC) Display..................
=,Settingupthe TV withyour PC..........................................20
15 ="Installingthe Stand............................................................37
15 =,Disconnectingthe Stand.................................................. 37
17 _Specifications .................................................. 40
19 =,Dimensions.........................................................................41
License
$R$(0_ TruSurround HD, SRS and (o) Symbol are trademarks of SRS Labs, Inc.
D i G i T k L
TruSurround HD technology is incorporated under license from SRSLabs, Inc.
[I] DOLBY Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks
DIGITAL ] of Dolby Laboratories.
C)
Symbol
Note One-TouchButton TOOLButton
![](/html/9a/9a7f/9a7f9ac20a3dd2300cc8833200b1ec6ecf8659573ddb15f136c4f0ecbac3b5c1/bg4.png)
Figures and illustrations inthis User Manual are provided for reference only and may differ from actual productappearance.
Product design and specifications may be changed without notice in order to enhance product performance.
List of Features
• Adjustable picture settings that can be stored inthe TV's memory.
• Automatic timer to turn the TV on and off.
• Aspecial sleep timer.
• Excellent Digital Interface & Networking :
• With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Cable Box/Satellite receiver (Set-Top
Box) needed.
• HDMI/DVl connection of your PC to this TV.
• Excellent Picture Quality
• SRS TruSurround HD provides a virtual surround system.
Accessories
Remote Control (BN59-00852A) &
Batteries (AAA x 2)
Cover-Bottom Screw (M4 X L16) Screw (M4 X L14)
(LN32B550 : BN63-05466A) (6002-001294) (LN32B550:6003-001334)
(LN37B550 : BN63-05468A)
(LN40B550 : BN63-05468A)
(LN40B550 : BN63-05469A)
(LN52B550 : BN63-05469A)
Owner's Instructions
Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
The items color and shape may vary depending onthe model.
Power Cord (3903-000144) TV-Holder & Screw (M4 X 16)
(BN96-10788A)
(Depending onthe model)
r: ......
Warranty Card /
Safety Guide Manual
Cleaning Cloth (BN63-01798B)
![](/html/9a/9a7f/9a7f9ac20a3dd2300cc8833200b1ec6ecf8659573ddb15f136c4f0ecbac3b5c1/bg5.png)
Viewing the Control Panel
The product color and shape may vary depending on the model.
The front panel buttons can beactivated by touching them with your finger.
S_MSUNG
/ \ ) I o SOURCE MENU -- VOL -'1- v CH A _ _ I
O SPEAKERS
0 REMOTE CONTROL SENSOR: Aim the remote control towards this spot on the TV.
O SOURCEIB#: Toggles between all the available input sources. In the on-screen menu, use this button as you use the
ENTERIB_ button on the remote control.
O MENU: Press to see an on-screen menu of your TV's features.
O =VOL+: Press to increase or decrease the volume. In the on-screen menu, use the =VOL+ buttons asyou would use the
and !_ buttons onthe remote control.
O V CH A: Press to change channels. In the on-screen menu, use the V CH A buttons as you would use the T and A
buttons on the remote control.
O POWER INDICATOR: Blinks and turns offwhen the power is on and lights up instand-by mode.
O (b (POWER): Press to turn the TV on and off.
![](/html/9a/9a7f/9a7f9ac20a3dd2300cc8833200b1ec6ecf8659573ddb15f136c4f0ecbac3b5c1/bg6.png)
Viewing the Connection Panel
[TV Rear Panel]
[TV Side Panel]
i®
The product color and shape may vary depending on the model.
O HDMI IN I(DVI), 2, 3, 4 / DVI AUDIO IN [R-AUDIO-L]
- Connects to the HDMIjack of a device with an HDMI output.
No sound connection is needed for an HDMI to HDMI connection.
Use the HDMI IN 1 (DVl) jack for DVl connection to an external device. Use a DVl to HDMI cable or DVI-HDMI
adapter (DVl to HDMI) for video connection and the DVl AUDIO IN [R-AUDIO-L] jacks for audio.
When using an HDMI/DVl cable connection, you must use the HDMI IN 1 (DVl) jack.
You can also use the ports to connect to a PC.
O PC IN [PC] / (AUDIO)
- Connects to the video and audio outputjacks onyour PC.
O DIGITAL AUDIO OUT (OPTICAL)
- Connects to a Digital Audio componentsuchas a Home theater receiver.
O EX-LINK
- Connector for serviceonly.
AUDIO OUT
- Connects to the audioinput jacks on yourAmplifier/Home theater.
O usB
- Connector for software upgrades and Media Play,etc.
O AVlN2
- Video and audio inputs for external devices, such as a camcorder or VCR.
0 ANT IN
- Connects to anantenna or cable TV system.
0 COMPONENT IN 1,2 /AV IN 1
- Connects Component video / audio. The COMPONENT iN 1jack is also used as the AV iN 1jack.
Connect the video cable to the COMPONENT iN 1 [YNIDEO] jack and the audio cable to the COMPONENT iN 1
[R-AUDIO-L] jacks.
_) KENSINGTON LOCK
- The Kensington Lock(optional) is a device used to physically fix the systemwhen used ina public place. If you want to
use a locking device, contact the dealer where you purchased the TV.
The location of the Kensington Lock may be different depending on its model.
_}D POWER INPUT
- Connects the supplied power cord.
![](/html/9a/9a7f/9a7f9ac20a3dd2300cc8833200b1ec6ecf8659573ddb15f136c4f0ecbac3b5c1/bg7.png)
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV.
The performance of the remote control may be affected by bright light.
The product color and shape may vary depending on the model.
O POWER: Turns the TV on and
off.
TV: Selects the TV mode directly
NUMERIC BUTTONS: Press to
change the channel.
O _: Press to select additional
channels (digital) being
broadcast by the same station.
For example, to select channel
'54-3', press '54', then press
and '3'.
O MUTE _: Press to temporarily
cut offthe sound.
O --VOL+: Press to increase or
decrease the volume.
CH LIST: Used to display
Channel Lists on the screen.
O TOOLS: Useto quickly select
frequently used functions.
O INFO: Press to display
information on the TV screen.
_) COLOR BUTTONS: Use these
buttons in the Channel list menus
etc.
_) MEDIA.P: Allows you to play
music flies, pictures, and movies.
li_ P.MODE: Press to selectthe
picture mode.
_) Use these buttons in the DMA
andAnynet + modes. ([_: This
remote can be used to control
recording on Samsung recorders
with the Anynet+ feature)
_) ON/OFF [_q: Pressing the
ON/OFF [_q light button toggles
between on and off.When the
remote control is on, and a
button is pressed on the remote
control, the remote control
buttons will be lit for a moment.
(Using the remote control with
the ON/OFF [_q light button
set to On will reduce the battery
usage time.)
PRE=CH:Enables you to return
to the previous channel you were
watching.
O v CH A : Press to change
channels.
_iJ SOURCE: Press to display
and select the available video
sources.
_) FAV.CH: Press to switch to your
favorite channels,
_) MENU: Displays the main on-
screen menu.
RETURN: Returns to the
previous menu,
_) UPAIDOWNVlLEFT_I
RIGHT_/ENTERIB',J: Use to
select on-screen menu items and
change menu values.
_) EXIT: Press to exit the menu.
t_) RSIZE: Picture size selection.
_) SRS: Selects SRS TruSurround
HD mode.
_) CC: Controls the caption
decoder.
MTS: Press to choose stereo,
mono or SeparateAudio
Program (SAP broadcast).
POWER
TV ON/OFF
I CF
installing Batteries in the Remote Control
1,
Lift the cover at the back of the remote control upward as shown in the figure.
2.
Install two AAA size batteries.
Make sure to match the '+' and '-' ends of the batteries with the diagram insidethe
compartment.
3,
Replace the cover.
Remove the batteries andstore them in a cool, dry place if you won't be using the
remote control for a long time. (Assuming typical TV usage, the batteries should last for about one year.)
%
If the remote control doesn't work, check the following:
• Is the TV power on?
• Are the plus and minus ends of the batteries reversed?
• Are the batteries drained?
• Is there a power outage oris the power cord unplugged?
• Is there a special fluorescent light or neon sign nearby?
![](/html/9a/9a7f/9a7f9ac20a3dd2300cc8833200b1ec6ecf8659573ddb15f136c4f0ecbac3b5c1/bg8.png)
Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like the diagram to the right, see 'Antennas with 300
O Flat Twin Leads' below.
If your antenna has one lead that looks like the diagramto the right, see 'Antennas with 75 O
Round Leads'.
If you have two antennas, see 'Separate VHF and UHF Antennas'.
Antennaswith 300Q FlatTwinLeads
If you are using an off-air antenna (such asa roof antenna or 'rabbit ears') that has 3000 twin
flat leads, follow the directions below.
1. Place the wires from the twin leads under the screws on a 300-75 O adapter (not
supplied). Use a screwdriver to tighten the screws.
2. Plug the adaptor into the ANT IN terminal on the back of the TV.
Antennaswith 75Q RoundLeads
PlugtheantennaleadintotheANTINterminalonthebackoftheTV.
Separate VHF and UFIF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must combine
the two antenna signals before connecting the antennas to the TV.This procedure requires an
optional combiner-adaptor (available at most electronics shops).
1. Connect both antenna leads to the combiner.
2. Plug the combiner into the ANT INterminal on the bottom of the rear panel.
Connecting Cable TV
Toconnect to a cableTV system,follow the instructions below.
Cablewithout aCableBox
Plug the incoming cable into the ANT IN terminal on the back ofthe TV.
Because this TV is cable-ready, you do not need a cable box to view unscrambled cable
channels.
Connecting to a Cable Box that Deserambles All Channels
1. Find the cable that is connected to the ANT OUT terminal on your cable box.
This terminal might be labeled 'ANT OUT', 'VHF OUT' or simply, 'OUT'.
2. Connect the other end of this cable to the ANT INterminal on the back of the TV.
ANT IN _
![](/html/9a/9a7f/9a7f9ac20a3dd2300cc8833200b1ec6ecf8659573ddb15f136c4f0ecbac3b5c1/bg9.png)
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such aspremium channels), follow the instructionsbelow. You will need atwo-
way splitter,an RF (A/B) switch and four lengths of RF cable. (These items are available at most electronics stores.)
CA_L
.... ANT,;Rear
CableBox
i. Find and disconnect the cable that is connected to the ANT IN terminal onyour cable box.
This terminal might be labeled 'ANT IN', 'VHF IN' or simply, 'IN'.
2. Connect this cable to a two-way splitter.
3. Connect an RF cable between the OUTPUT terminal on the splitter and the IN terminal on the cable box.
4. Connect an RF cable between the ANT OUT terminal on the cable boxand the B-IN terminal onthe RF(A/B) switch.
6. Connect another cable between the other OUT terminal on the splitter and theA-IN terminal on the RF (A/B) switch.
6. Connect the last RF cable between the OUT terminal on the RF (A/B) switch and the ANT INterminal on the rear of the TV.
After you have made this connection, set theA/B switch to the 'A'position for normal viewing. Set the A/B switch to the 'B'
position to view scrambled channels. (When you set the A/B switch to 'B', you will need to tune your TV to the cable box's
output channel, which is usually channel 3 or 4.)
Connecting a DVD/ Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via HDMI
This connection can only be made if there is an HDMI Output connector on the external device.
RF(NB} Switch
DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box)
O HDMI Cable (Not supplied) or or
l,
Connect an HDMI Cable between the HDMI iN I (DVI), 2, 3 or 4jack on the TV and the HDMI jack on the DVD / Blu-ray
Player or Cable Box / Satellite receiver (Set-Top Box).
What is HDMI?
%
o
HDMl(High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and video signals
using a single cable.
o
The difference between HDMI and DVI is thatthe HDMI device is smaller insize and has the HDCP (High Bandwidth Digital
Copy Protection) coding feature installed.
Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.
The TV may not output sound and pictures may be displayed with abnormal color when DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box)supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI
cable and there is no sound, connect the HDMI cable to the HDMI iN 1 (DVm)jack and the audio cables to the DVmAUDIO
iN JR-AUDIO-L] jacks on the back of the TV. Ifthis happens, contact the company that provided the DVD/ Blu-ray player /
Cable Box / Satellite receiver (Set-Top Box) to confirm the HDMI version, then request an upgrade.
HDMI cables that are not 1.3 may cause annoyingflicker or no screen display.
TV Rear Panel TV Side Panel
![](/html/9a/9a7f/9a7f9ac20a3dd2300cc8833200b1ec6ecf8659573ddb15f136c4f0ecbac3b5c1/bga.png)
Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via DVl
This connection can only be made if there is a DVI Output connector on the external device.
TV Rear Panel
DVD/ Blu=ray player / Cable Box 1
Satellite receiver (Set-Top Box)
O Audio Cable (Not supplied)
DVI to HDMI Cable (Not supplied)
1,
Connect a DVI to HDMI Cable or DVI-HDMIAdapter between the HDMI IN 1 (DVI)jack on the TV and the DVI jack on the
DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box).
2.
Connect Audio Cables between the DVl AUDIO IN JR=AUDIO-L]jack on the TV and the DVD / Blu-ray player / CableBox /
Satellite receiver (Set-Top Box).
Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.
When connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box), match the color of the connection
terminal to the cable.
When using an HDMI / DVI cable connection, you must use the NDMI IN 1 (DVl) jack.
Connectinga DVD/ Blu-rayplayer/ CableBox / Satellitereceiver(Set-TopBox)viaComponentcables
The rear panel jacks on your TV make iteasy to connect a DVD / Blu-ray player/ Cable Box / Satellite receiver (Set-Top Box) to
,ourTV.
TV Rear Panel
DVD / Blu-ray player / Cable Box /
Satellite receiver (Set=TopBox)
Audio Cable (Not supplied)
1,
Connect a Component Cable between the COMPONENT IN (1 or 2) [Y, PB,PR]jacks on the TV andthe COMPONENT [Y, PB,
PR]jacks on the DVD/ Blu-rayplayer / Cable Box / Satellite receiver (Set-Top Box).
2.
Connect Audio Cables between the COMPONENT IN(I or 2) [R=AUDIO-L]jacks on the TV and the AUDIO OUTjacks on the
DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box).
Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and Pr (Red) for enhanced video quality.
Be sure to match the component video and audio connections. For example, if connecting a Component video cable to
COMPONENT IN !, connect the audio cable to COMPONENT IN 1 also.
Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.
When connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box), match the color of the connection
terminal to the cable.
![](/html/9a/9a7f/9a7f9ac20a3dd2300cc8833200b1ec6ecf8659573ddb15f136c4f0ecbac3b5c1/bgb.png)
Connecting a VCR
TV Rear Panel
1.
Connect a Video Cable between the AV IN 1 [YNIDEO] or AV IN 2 [VIDEO]jack on the TV and the VIDEO OUTjack on the
VCR.
2.
Connect Audio Cables between the AV IN (1 or 2) jacks onthe TV and theAUDIO OUT jacks onthe VCR.
If you have a 'mono' (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio inputjacks
of the TV.Alternatively, connect the cable to the 'R' jack. If your VCR is stereo, youmust connect two cables.
Each VCR hasa different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
When connecting toAV IN 1, the color of theAV IN 1 [YNIDEO] jack (Green) does not match the color of the video cable
(Yellow).
TV Side Panel
Connecting a Digital Audio System
The rear panel jacks on your TV make iteasy to connect a Digital Audio System (Home theater/Receiver) to your TV.
TV Rear Panel
Digital Audio System
....'/: 'k.? i il
Eli optical Cable (Not supplied)
1.
Connect an Optical Cable between the DIGITAL AUDIO OUT (OPTICAL) jacks on the TV and the Digital Audio Input jacks on
the Digital Audio System.
When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack: Decrease the volume of the TV
and adjust the volume level with the system's volume control.
5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
Each Digital Audio System has a different back panel configuration.
When the Home Theater receiver is setto On, you can hear sound output from the TV's Opticaljack. Whenthe TV is
displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a
digital component such as a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) and is connected to the
TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver. If you want to hear 5.1 channel audio,
connect the digital audio out jack on DVD / Blu-ray player / Cable Box / Satellite receiver (Set-TopBox) directly to an
Amplifier or HomeTheater, not the TV.
![](/html/9a/9a7f/9a7f9ac20a3dd2300cc8833200b1ec6ecf8659573ddb15f136c4f0ecbac3b5c1/bgc.png)
Connecting an Amplifier / DVD Home Theater
TV Rear Panel
Amplifier/DVD Home Theater
j ........................................
O Audio Cable (Not supplied)
1,
Connect Audio Cables between the AUDIO OUT [R-AUDIO-L] jacks on the TV and Audio Input jacks on theAmplifier / DVD
Home Theater.
When an audio amplifier is connected to the AUDIO OUT JR-AUDIO-L]jacks: Decrease the volume of the TV and adjust
the volume level with theAmplifier's volume control.
Each Amplifier/DVD Home Theater has a different back panel configuration.
When connecting an Amplifier/DVD Home Theater, match the color of the connection terminal to the cable.
![](/html/9a/9a7f/9a7f9ac20a3dd2300cc8833200b1ec6ecf8659573ddb15f136c4f0ecbac3b5c1/bgd.png)
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV.
UsingaVideoCable
TV Side Panel
O Video Cable (Not supplied)
0 Audio Cable (Not supplied)
Camcorder
1,
Connect a Video Cable between the AV IN 2 [VIDEO] jack on the TV and the VIDEO OUT jack on the camcorder.
2.
Connect Audio Cables between the AV IN 2 JR-AUDIO-L] jacks on the TV and theAUDIO OUT jacks on the camcorder.
Each Camcorder has a different back panel configuration.
When connecting a Camcorder, match the color of the connection terminal to the cable.
UsinganHDIVllCable
TV Side Panel
HDMI Cable (Not supplied)
HD Camcorder
1. Connect an HDMI Cable between the HDMI 4jack on the TV and the HDMI OUTjack onthe camcorder.
![](/html/9a/9a7f/9a7f9ac20a3dd2300cc8833200b1ec6ecf8659573ddb15f136c4f0ecbac3b5c1/bge.png)
Connecting a PC
Using a D-Sub Cable
TV RearPanel
PC
O D-Sub Cable (Not supplied)
PC Audio Cable (Not supplied)
1,
Connect a D-Sub Cable between PC IN [PC] connector on the TV and the PC output connector on your computer.
2,
Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and theAudio Out jack of the sound card on your
computer.
When connecting a PC, match the color of the connection terminal to the cable.
Usingan HDMItDVlCable
TV RearPanel
PC
3,5 ram Stereo raini-plug/2ROA Cable (Not supplied)
O HDMI/DVI Cable (Not supplied)
1,
Connect an HDMI/DVI cable between the HDMmIN 1 (DVl) jack onthe TV and the PC output jack onyour computer.
2,
Connect a 3.5 mm Stereo miniplug / 2RCACable between the DVl AUDIO mN[R-AUDmO-L]jack on the TV and theAudio Out
jack of the soundcard on your computer.
When using an HDMI/DVI cable connection, you must use the HDIVllmNI (DVm)terminal.
Usingan HDMICable
TV Rear Panel
PC
_ " _O_!il_ (Not supplied) or or _z
TV Side Panel
Connect an HDMI cable between the HDMI mNI (DVm),2, 3 or 4 jack on the TV and the PC output jack on your computer.
@ Each PChas a different back panel configuration.
![](/html/9a/9a7f/9a7f9ac20a3dd2300cc8833200b1ec6ecf8659573ddb15f136c4f0ecbac3b5c1/bgf.png)
Viewing the menus
Before using the TV,follow the steps below to learn how to navigate the menu inorder to select
and adjust different functions.
1. Press the MENU button.
The main menu is displayed on the screen. Its left side hasthe following icons: Picture,
Sound, Channel, Setup, Input, Application, Support.
2. Press the A or v' button to select one of the icons.
Press the 41or _- button to access the icon's sub-menu.
3. Press the A or T button to move to items in the menu.
Press the ENTER C,_ button to enter items in the menu.
4. Press the A/T/',I/_- button to change the selected items.
Press the RETURN buttonto return to the previous menu.
6. Press the EXIT button to exit from the menu.
Using the remote control buttons
Example: Setting the TV's Brightness in the Picture Menu
Adjusting the Brightness to 80
1. Press the MENU button to display the menu.
2. Press the ENTER _,,Jbutton to select Picture.
3. Press the A or T button to select Brightness.
4. Press the ENTER_ button.
6. Press the _ or _. button until the Brightness changes to 80.
6. Press the ENTER[B# button.
Press the EXiT button to exit from the menu.
![](/html/9a/9a7f/9a7f9ac20a3dd2300cc8833200b1ec6ecf8659573ddb15f136c4f0ecbac3b5c1/bg10.png)
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1. Press the POWER (_ button onthe remote control.
You can also use the POWER (_ button on the TV.
The message Select Language ofthe OSD. is displayed.
2. Press the A or T button to select the language, then press the ENTER[B,_ button. The
message Select 'Home Use' when installing this TV in your home. is displayed.
3. Press the _ or _ button to select Store Demo or Home Use, then press the ENTER C,_ button.The message Select the
Antenna source to memorize, is displayed.
We recommend setting the TV to Home Use mode for the best picture inyour homeenvironment.
Store Demo mode is only intended for use in retail environments. If the unit is accidentally set to Store Demo modeand
you want to return to Home Use (Standard): Press the volume buttonon the TV. When the volume OSD is displayed,
press and holdthe MENU button onthe TV for 5 seconds.
4. Press the A or _ button to memorize the channels of the selected connection. Press the ENTER[E,# buttonto selectStart.
Air: Air antenna signal. / Cable: Cable antenna signal. / Auto: Air and Cable antenna signals.
In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressingthe A, T, _ or _,-
button, then press the ENTER[B,# button. If you have Digital cable, select the cable system signal source for both Analog
and Digital. Contact your local cable company to identify the type ofcable system that exists in your particular area.
6. Press the ENTERI--},# button to select Start. The TV will begin memorizing all of the available channels.
To stop the search before it has finished, press the ENTER[B,# button with Stop selected.
After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then
reappears. Press the ENTER _,_ button when channel memorization is complete. The message Set the Clock Mode. is
displayed.
6. Press the ENTERI_,,_button.
Press the A or T button to select Auto, then Press the ENTERI:E# button. The message Set to daylight saving time. is
displayed. Ifyou select Manual, Set current date and time is displayed.
7. Press the A or T button to select Off, On or Auto, then press the ENTERI:E# button.
8. Press the A or T button to highlight the timezone for your local area. Press the ENTER C_ button. If you have received a
digital signal, the time will be set automatically. Ifnot, see page 22 to set the clock.
9. The connection method to provide the best quality HD is offered.After confirming the method, press the ENTER C_ button.
10. The message Enjoy your watching, is displayed. When you have finished, press the ENTER C_ button.
If you want to reset this feature...
1. Press the MENU button to display the menu. Press the A or T button to select Setup, then press the ENTER C.,Jbutton.
2. Press the ENTERI:E# button again to select Plug & Play.
The Plug & Play feature is only available in the TV mode.
![](/html/9a/9a7f/9a7f9ac20a3dd2300cc8833200b1ec6ecf8659573ddb15f136c4f0ecbac3b5c1/bg11.png)
Configuring the Channel Menu
C)
Antenna _ Air / Cable
Before your television can begin memorizing the available channels, youmust specify the type
of signal source that is connected to theTV (i.e. anAir or a Cable system).
_-_ Press the TOOLS button to display the Tools menu. You can also set the Antenna by
selecting Tools _ Switch to Cable (or Switch to Air).
C]
Auto Program
Air: Air antenna signal, / Cable: Cable antenna signal. 1Auto: Air and Cable antenna
signals
When selecting the Cable TV system: Selects the cable system. STD, HRCand IRC
identify various types of cable TV systems. Contact your localcable company to identify the type of cable system that exists in
your particular area.At this point the signal source has been selected.
After all the available channels are stored, it starts to remove scrambled channels (Clear Scrambled Channels). The Auto
program menu then reappears.
If you want to stop Auto Programming, press the ENTERE;,_ button. The Stop Auto Program? message will be displayed.
Select Yes by pressing the 4 or _ button, then press the ENTER_,_ button.
C)
Clear Scrambled Channels (digital channels only)
This function is used to filter out scrambled channels after Auto Program is completed. This process may take upto 20--30
minutes.
Tostop searching scrambled channels: Press the ENTER _,_ button to select Stop. Press the 4 button to select Yes, then
press the ENTER[--;,,Jbutton.
This function is only available in Cable mode.
C)
Channel List
For detailed procedures on using the Channel List,refer to the 'Managing Channels' instructions.
You can select these options by simply pressing the CH LIST button on the remote control.
C)
Fine Tune (analog channels only)
Use fine tuning to manually adjust a particular channel for optimal reception.
If you do not store the fine-tuned channel inmemory, adjustments arenot saved.
*will appear next to the name offine-tuned channels.
To reset the fine tuning setting, press the T button to select Reset, then press the ENTER _,_ button.
Managing Channels
Using this menu, you can add / delete or set favorite channels and use the program guide for
digital broadcasts.
All Channels
Shows all currently available channels.
Added Channels
Shows all added channels.
Favorite
Shows all favorite channels.
Toselect the favorite channels youhave set up, press the FAV.CHbutton on the remote control.
![](/html/9a/9a7f/9a7f9ac20a3dd2300cc8833200b1ec6ecf8659573ddb15f136c4f0ecbac3b5c1/bg12.png)
Programmed
ShowsallcurrentreservedPrograms.
SelectachannelintheAl!Channels,AddedChannels or Favorite screen by pressing the A / T buttons, and pressing the
ENTER{--J,.Jbutton. Then you canwatch the selected channel.
Using the Color buttons with the Channel List
- Green (Zoom): Enlarges or shrinks a channel number.
- Yellow (Select): Selects multiple channel lists. You canperform the add / delete or add to Favorite / delete from Favorite
function for multiple channels at the same time. Select the required channels and press the yellow button to set all the
selected channels at the same time. The _/ mark appears to the left of the selected channels.
- TOOLS (Tools): Displays the Add (or Delete), Add to Favorite (or Delete from Favorite), Timer Viewing, Channel
Name Edit, Select All (or Deseleet All) and Auto Program menus (The Options menus may differ depending on the
situation.)
Channel Status Display icons
- v :A channel set as a Favorite.
- _/: A channel selected by pressing the yellow button.
- _ :A Program currently being broadcast.
- (_) :Areserved program
Channel
List Option Menu (in All Channels /Added Channels / Favorite)
Press the TOOLS button to use the option menu.
Option menu items may differ depending on the channel status.
Add / Delete
You can delete or add a channel to display the channels youwant.
All deleted channels will beshown on All Channels menu.
Agray-colored channel indicates the channel has been deleted.
The Add menu only appears for deleted channels.
You can also delete a channel from the Added Channels or Favorite menu inthe same
manner.
Add to Favorite / Delete from Favorite
You can set channels you watch frequently as Favorite.
Press the TOOLS button to display the Tools menu. You can also set the addto (or delete
from) Favorites by selecting Tools _ Add to Favorite (or Delete from Favorite).
The v symbol will be displayed and the channel will be set as a favorite.
All favorite channels will be shown in the Favorite menu.
Timer Viewing
If you reserve a program youwant to watch, the channel is automatically switched to the reserved channel in the Channel List;
even when you are watching another channel. To reserve a program, set the current time first. (See page 22.)
Only memorized channels can be reserved.
You can set the channel, month, day, year, hour and minute directly by pressing the number buttons on the remote control.
Reserving a program will be shown in the Programmed menu.
Digital Program Guide and Viewing Reservation
When a digital channel is selected, and you press the _- button, the Program Guide for the channel appears. You can reserve
a program according to the procedures described above.
Channel Name Edit (analog channels only)
Channels can labeled so thattheir callletters appear whenever the channel is selected.
The names of digital broadcasting channels are automatically assigned and cannot be labeled.
Select All ! Deselect All
= Select All: Youcan select allthe channels inthe channel list.
• Deselect All: Youcan deselect all the selected channels.
You can only select Deseleet All when there is a selected channel.
Auto Program
For further details on setting up options, referto page 15.
![](/html/9a/9a7f/9a7f9ac20a3dd2300cc8833200b1ec6ecf8659573ddb15f136c4f0ecbac3b5c1/bg13.png)
Channel List Option Menu (in Programmed)
You can view, modify or delete a reservation.
Press the TOOLS button to use the option menu.
Change Info
Select to change a viewing reservation.
Cancel Schedules
Select to cancel a viewing reservation.
Information
Select to view a viewing reservation. (Youcan also change the reservation information.)
Select All
Select all reserved Programs.
Configuring the Picture Menu
C)
Mode
You can select the type of picture which best corresponds to your viewing requirements.
Press the P.MODE button on the remote control repeatedly to select the desired picture
mode.
Dynamic
Selects the picture for increased definition in a bright room.
Standard
Selects the picture for the optimum display in a normal environment.
Movie
Selects the picture for viewing movies in a dark room.
C)
Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)
Yourtelevision has several setting options that allow you to control the picture quality.
• Backlight: Adjusts the brightness of LCD back light.
• Contrast: Adjusts the contrast level of the picture.
• Brightness: Adjusts the brightness level of the picture
• Sharpness: Adjusts the edge definition of the picture.
• Color: Adjusts color saturation of the picture.
• Tint (G/R): Adjusts the color tint of the picture.
When you make changes to Backlight, Contrast, Brightness, Sharpness, Color or Tint (GtR) the OSD will be adjusted
accordingly.
In PC mode, youcan only makechanges to Backlight, Contrast and Brightness.
Settings can beadjusted and stored for each external device you have connected to an input of the TV.
The energy consumed during usecan be significantly reduced ifthe brightness level of the picture is lowered, which will
reduce the overall running cost.
C) Advanced Settings
Samsung's new TVs allow you to make even more precise picture settings than previous
models.
Advanced Settings is available in Standard or Movie mode.
In PC mode, youcan only makechanges to Gamma and White Balance from among the
Advanced Settings items.
Black Tone -, Off I Dark / Darker / Darkest
You can select the black level on the screen to adjust the screen depth.
![](/html/9a/9a7f/9a7f9ac20a3dd2300cc8833200b1ec6ecf8659573ddb15f136c4f0ecbac3b5c1/bg14.png)
DynamicContrast _ Off / Low / Medium / High
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma
You can adjust the primary color (red, green, blue) Intensity. (-3 -- +3)
Color Space
Color space is a color matrix composed of red, green and blue colors. Selectyour favorite color space to experience the most
natural color.
• Native: Native Color Space offers deep and richcolor tone.
• Auto: Auto Color Space automatically adjusts to the most natural color tone based on program sources.
White Balance
You can adjust the color temperature for more natural picture colors.
• R-Offset / G-Offset / B-Offset / R-Gain / G-Gain / B-Gain: You canadjust the Color 'temperature' inthe light areas by
changing the values of R, G, B. Recommended for advanced users only.
• Reset: The previously adjusted white balance will be reset to the factory defaults.
Changing the adjustment value will refresh the adjusted screen.
Flesh Tone
You can emphasize the pink 'flesh tone' in the picture.
Changing the adjustment value will refresh the adjusted screen.
Edge Enhancement _ Off / On
You can emphasize object boundaries in the picture.
Picture Options
In PC mode, youcan only makechanges to the Color Tone and Size from among the
items in Picture Options.
Color Tone _ Cool / Normal 1Warm1 / Warm2
Warm1 or Warm2 is only activated when the picture mode is Movie.
Settings can beadjusted and stored for each external device you have connected to an
input ofthe TV.
Size
Occasionally, you may want to change the size of the image on your screen. Your TV comes
with sixscreen size options, each designed to work best with specific types of video input. Your
cable box/satellite receiver may have its own set of screen sizes as well. In general, though, you should view the TV in 16:9 mode
as much as possible.
Alternately, you can press the P.SITEbutton on the remote control repeatedly to change the picture size.
• 16:9 :Sets the picture to 16:9 wide mode.
• Zoom1: Magnifies the size of the picture on the screen.
• Zoom2: Magnifies the size of the picture more than Zoom1.
• Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen.
• 4:3 :Sets the picture to 4:3 normal mode.
• Screen Fit: Usethe function to seethe full image without any cutoff when HDMI (720p/1080i/1080p), Component
(1080i/I080p) or DTV (1080i) signals are input.
Zoorn2 Move
Wide Fit 4:3 Screen Fit
![](/html/9a/9a7f/9a7f9ac20a3dd2300cc8833200b1ec6ecf8659573ddb15f136c4f0ecbac3b5c1/bg15.png)
%
Temporary image retention may occur when viewing a static image on the set for more than two hours.
%
After selecting Zoom1, Zoom2 orWide Pit: Press the 41or i_ button to select Position, then press the ENTER _ button.
Press the ,L or T button to move the picture up and down.
%
After selecting Screen Fit in HDMI (1080i/1080p) or Component (I080i/1080p) mode, you made need to center the picture:
Press the _ or _. button to select Position, then press the ENTER_ button. Press the A, T, _ or _.button to move the
picture.
Reset: Press the 4 or !_-buttonto select Reset, then press the ENTERI:B# button. You can initialize the setting.
%
HD (High Definition): 16:9 - I080i/1080p (1920x1080), 720p (1280x720)
%
Settings can beadjusted and stored for each external device you have connected to an input of the TV.
_.p.tso.rce .................................._==_°°_°_°_°_°_°_°_°_°_°_°_°_°_°_°_°_°_°_°_°_°_°_°_°_°_°_°........p_t.j_s_ ..................................
TV, AV,Component (480i, 480p) 16:9, Zoom1, Zoom2, 4:3
DTV(1080i), Component (1O8Oi,1O8Op),HDMI (720p, I080i, I080P) 16:9, 4:3, Wide Fit, Screen Fit
PC 16:9, 4:3
Digital NR -_ Off / Low / Medium / High / Auto
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static
and ghosting that may appear on the screen.
When the signal is weak, select one of the other options until the best picture isdisplayed.
HDMI Black Level _ Normal / Low
You can select the black level on the screen to adjust the screen depth.
This function is active only when an external device is connected to the TV via HDMI.The HDMI Black Level function may not
be compatible with all external devices.
Film Mode -_ Off / Auto
The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
Film Mode is supported inTV, Video, Component (480i/1080i) and HDMI (480i/I080i).
C3 Picture Reset -_ Reset Picture Mode / Cancel
Resets all picture settings to the default values.
Reset Picture Mode: Current picture values return to default settings.
Using Your TV as a Computer {PC) Display
Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different,
depending upon your particular version of Windows and your particular video card. However,even if your actual screens look
different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung
Dealer.)
1. First, click on 'Control Panel' in the Windows start menu.
2. When the control panel window appears, click on 'Appearance and Themes' and a display dialog-box will appear.
3. When the control panel window appears, click on 'Display' anda display dialog-box will appear.
4. Navigate to the 'Settings' tab on the display dialog-box.
The correct size setting (resolution): Optimum: 1920 X 1080 pixels
If a vertical frequency option exists on your display settings dialog box, the correct value is 60 or 60 Hz. Otherwise, just click
OK and exit the dialog box.
![](/html/9a/9a7f/9a7f9ac20a3dd2300cc8833200b1ec6ecf8659573ddb15f136c4f0ecbac3b5c1/bg16.png)
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically. Ifthe signal from the system
doesn't equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no
video. For the display modes listed below, the screen image has been optimized during manufacturing.
D=Suband HDMtlDVl Input
iBM
MAC
VESA CVT
VESA DMT
VESA GTF
VESA DMT /
DTV CEA
640x 350
720x 400
640x 480
832 x 624
1152x 870
720 x 576
1152x 864
1280x 720
1280x 960
1280x 720
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024x 768
1024x 768
1024x 768
1152x 864
1280 x 1024
1280 x 1024
1280x 800
1280x 800
1280x 960
1360 x768
1440 x900
1440 x900
1680 x 1050
1280 x720
1280 x 1024
31.469
31.469
35.000
49.726
68.681
35.910
53.783
44.772
75.231
56.456
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
49.702
62.795
60.000
47.712
55.935
70.635
65.290
52.500
74.620
70.086 25.175 +/-
70.087 28.322 -/+
66.667 30.240 -/-
74.551 57.284 -/-
75.062 100.000 -/-
59.950 32.750 -/+
59.959
59.855
74.857
74.777
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
59.810
74.934
60.000
60.015
59.887
74.984
59.954
70.000
70.000
1920 x I080p 67.500 60.000 148.500
When using an HDMI / DVI cable connection, you must use the HDMI iN 1jack.
Setting up the TV with your PC
Preset: Press the SOURCE button to select PC mode.
81.750
74.500
130.000
95.750
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
83.500
106.500
108.000
85.500
106.500
136.750
146.250
128.943
-/+
-/+
-/+
-/+
-/-
-/-
-/-
+/+
+/+
+/+
-/-
-/-
+/+
+/+
+/+
+/+
-/+
-/+
+/+
+/+
-/+
-/+
-/+
-/+
-/-
+/+
E3
Auto Adjustment
Use the Auto Adjust function to have the TV set automatically adjust the video signals it
receives. The function also automatically fine-tunes the settings and adjusts the frequency
values and positions.
_-_ Press the TOOLS button to display the Tools menu. You can also set the AutoAdjustment
by selecting Tools _ Auto Adjustment,
This function does notwork in DVI-HDMI mode.
C) Screen
The purpose of the picture quality adjustment is to remove or reduce picture noise. Ifthe noise is not removed by fine tuning alone,
then make the vertical frequency adjustments onyour PC and fine tune again. After the noise has been reduced, re-adjust the
picture so that it is aligned on the center of the screen.
Coarse / Fine
The purpose of picture quality adjustment is to remove or reduce picture noise. Ifthe noise is not removed by Fine-tuning alone,
then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture
so that it is aligned on the center of screen.
PC Position
Adjust the PC's screen positioning if itdoes notfit the TV screen. Press the A or T button to adjusting the Vertical-Position. Press
the 41or _-button to adjust the Horizontal-Position.
image Reset
You can replace all image settings with the factory default values.
![](/html/9a/9a7f/9a7f9ac20a3dd2300cc8833200b1ec6ecf8659573ddb15f136c4f0ecbac3b5c1/bg17.png)
Configuring the Sound Menu
C) Mode _ Standard / Music / Movie / Clear Voice / Custom
You can select a sound mode to suit your personal preferences.
_-_ Press the TOOLS button to display the Tools menu. You can also configure the sound
mode by selecting Tools _ Sound Mode.
[:3 Equalizer
The sound settings can be adjusted to suit your personal preference.
Mode
Selects the sound mode among the predefined settings.
Balance L/R
Adjusts the balance between the right and left speaker.
f00Hz / 300Hz / IKHz / 3KHz / 10KHz {Bandwidth Adjustment)
Toadjust the levelof different bandwidth frequencies.
Reset
Resets the equalizer settings to the default values.
SRS TruSurround HD _ Off/On
SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two
speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system,
including internal television speakers. It is fully compatible with all multichannel formats.
Press the SRS button on the remote control to select On or Off.
Preferred Language (digital channels only)
DigitaI-TV broadcasts are capable of simultaneous transmission of many audiotracks (for example, simultaneous translations of
the program intoforeign languages).
You can listen in a language other than the Preferred Language by pressing the MTS button on the remote control.
Preferred Language is available only in Digital TV mode.
You can only select the language from among the actual languages being broadcast.
C) Multi-Track Sound (MTS) (analog channels only)
Press the MTS button onthe remote control repeatedly to select Mono, Stereo or SAP.
• Mono: Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal.
• Stereo: Choose for channels that are broadcasting in stereo.
• SAP: Chooseto listento the Separate Audio Program, which is usually a foreign-language translation.
Multi-Track Sound is available only in Analog TV mode.
Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP.
C)
Auto Volume -_ Off/On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is
changed. This feature lets you automatically adjust the volume ofthe desired channel by lowering the sound output when the
modulation signal is high or by raising the sound output when the modulation signal is low.
![](/html/9a/9a7f/9a7f9ac20a3dd2300cc8833200b1ec6ecf8659573ddb15f136c4f0ecbac3b5c1/bg18.png)
[_ Speaker Select
When you watch TV with itconnecting to a Home theater, turn the TV speakers off so you can listen to sound from the Home
theater's (external) speakers.
External Speaker: Used to listento the sound of the External (Home Theater) Speakers.
TV Speaker: Used to listen to the sound of the TV Speakers,
If you select External Speaker in the Speaker Select menu, the sound settings will be limited.
The volume and MUTE buttons do not operate when the Speaker Select isset to External Speaker. Please set the volume
on your Home theater.
Mute
Sound Reset _ Reset All / Reset Sound Mode / Cancel
You can restore the Sound settings to the factory defaults.
Reset Sound Mode: Current sound values return to default settings.
Mute
Configuring the Setup Menu
Language
Youcansetthe menulanguage.
Time
Clock
Setting the clock is necessary inorder to use the various timer features of the TV.
The current time will appear every time you press the INFO button.
If you disconnect the power cord,you have to set the clock again.
= Clock Mode
You can set up the current time manually or automatically.
- Auto: Setthe current time automatically using the time from a digital broadcast.
- Manual: Setthe current time to a manually specified time.
Depending on the broadcast station and signal, the autotime may not be set correctly. If this occurs, set the time
manually.
The Antenna or cable must be connected inorder to set the time automatically.
= Clock Set
You can set the current time manually.
This function is only available when Clock Mode is set to Manual.
You can set the month,day, year, hour, minute and am/pm directly by pressing the number buttons on the remote control.
• Time Zone
Select your time zone.
This function is only available when Clock Mode is set to Auto.
• DST (Daylight Saving Time) _ Off / On 1Auto
Switches the Daylight SavingTime function on or off.
This function is only available when Clock Mode is set to Auto.
Sleep Timer
The sleep timer automatically shuts offthe TV after a preset time (30, 60, 90,120,150 and 180 minutes).
_-_ Press the TOOLS button to display the Tools menu. You can also set the sleeptimer by selecting Tools _ Sleep Timer.
Tocancel the Sleep Timer function, select Off.
![](/html/9a/9a7f/9a7f9ac20a3dd2300cc8833200b1ec6ecf8659573ddb15f136c4f0ecbac3b5c1/bg19.png)
Timer I / Timer 2/ Timer 3
Three different on / off timer settings can be made. You must set the clock first.
• On Time: Set the hour, minute, am/pm, and activate/inactivate. (Toactivate the timer with the setting you've chosen, set to
Activate.)
• Off Time: Set the hour, minute, am/pm, and activate/inactivate. (Toactivate the timer with the setting you've chosen, set to
Activate.)
• Volume: Setthe desired volume level.
• Source: When the On Time is active, you can turn on a specific channel or play back contents such as photoor audio files.
If the folder name to be configured bythe contents function is too long, itcannot be selected.
• Repeat: Select Once, Everyday, Mon~Fri, Mort~Sat, Sat~Sun or Manual.
@ When Manual is selected, press the _ buttonto select the desired day of the week. Pressthe ENTER _ button over the
desired day and the _ mark will appear.
@ You can set the hour, minute and channel by pressing the number buttons on the remote control.
@ Auto Power Off
When you set the timer On, the television will eventually turn off, if no controls are operated for3 hours after theTV was
turned on by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is
on for too long time.
C)
V-Chip
The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN
(personal ID number) before any of the V-Chiprestrictions are setup or changed.
V-Chip function is not available inHDMI, Component or PC mode.
The default PIN number of a new TV set is '0-0-0-0'
If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to 0-0-0-0 : POWER
(off) _ MUTE _ 8 _ 2 -* 4 -_ POWER (on).
Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings.
V-Chip Lock_ Off / On
You can block rated TV Programs.
TV Parental Guidelines
You can block TV programs depending on their rating.This function allows you to control what
your children are watching.
• TV-Y: Young children / TV-YT: Children 7 and over / TV-G: General audience /
TV-PG: Parental guidance / TV-14: Viewers 14and over / TV-MA: Mature audience
• ALL: Lock all TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation /
L: Adult Language / D: Sexually Suggestive Dialog
The V-Chip will automatically block certain categories that are more restrictive. For
example, if you block TV-Y category, then TV-Y7 will automatically be blocked. Similarly,
if you block the TV-G category, then all the categories in the young adult group will be
blocked (TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (D, L, S, V) work together
similarly.
The V-chip will automatically block certain categories that are 'More restrictive'. For example, if you block L sub-rating in TV-
PG, then the L sub-ratings in TVo14and TV-MA will automatically be blocked.
MPAA Rating
You can block movies depending on their MPAArating. The Motion Picture Association of
America(MPAA) has implemented a rating system that provides parents or guardians with
advance information on which films are appropriate for children.
= G: General audience (no restrictions).
• PG: Parental guidance suggested.
• PG=13:Parents strongly cautioned.
• R: Restricted. Children under 17 should be accompanied byan adult.
• NC-17: No children under age 17.
• X:Adults only.
• NR: Not rated.
The V-Chip will automatically block anycategory that is 'More restrictive'. For example, if you block the PG-13 category, then
R, NC-17 and Xwill automatically be blocked also.
![](/html/9a/9a7f/9a7f9ac20a3dd2300cc8833200b1ec6ecf8659573ddb15f136c4f0ecbac3b5c1/bg1a.png)
Canadian English
• C: Programming intended for children under age 8.
• C8+: Programming generally considered acceptable for children 8 years and over to watch on their own.
• G: General programming, suitable for all audiences.
• PG: Parental Guidance.
• 14+: Programming contains themes or content which may not be suitable for viewers under the age of 14.
• 18+:Adult programming.
The V-Chip will automatically block anycategory that is 'More restrictive'. For example, if you block G category, then PG, 14+
and 18+ will automatically be blocked also.
Canadian French
• G: General
• 8 arts+: Programming generally considered acceptable forchildren 8years and over to watch on their own.
• 13 arts+: Programming may not be suitable for children under the age of 13.
• 16 arts+: Programming is not suitable for children under the age of 16.
• 18 arts+: Programming restricted to adults.
@ The V-Chip will automatically block any category that is 'More restrictive'. For example, if you block 8 arts+ category, then 13
arts+, 16 arts+ and 18 arts+ will automatically be blocked also.
Downloadable U.8. Rating Ratingtitle rating information rating information
Parental restriction information can be used while watching DTV channels
If information is not downloaded from the broadcasting station, the Downloadable U,8,
rating menu is deactivated.
Parental restriction information is automatically downloaded while watching DTV channels.
It may take several seconds.
The Downioadable U.8. rating menu is available for use after information is downloaded
from the broadcasting station. However, depending on the information from the
broadcasting station, it may not beavailable for use.
Parental restriction levels differ depending on the broadcasting station. The default menu
name and Downloadable US rating changes depending on the downloaded information.
Even if you set the On-screen display to your desired language, the Downloadable U.8, Rating menu will appear in English
only.
The rating will automatically block certain categories that are more restrictive.
The rating titles (For example: Humor Level..etc) and TV ratings (For example: DH, MH, H..etc) may differ depending on the
broadcasting station.
Change PIN
The Change PIN screen will appear. Choose any4 digitsfor your PIN and enter them.
As soon as the 4 digits are entered, the Confirm New PINscreen appears. Re enter the same 4 digits. When the Confirm screen
disappears, your PIN has been memorized.
If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to 0-0-0-0 : POWER
(off) _ MUTE _ 8 _ 2 _ 4 _ POWER (on).
The number of current The number of a+l
Howto ResettheTVafter theV-Chip Blocksa Channel(EmergencyEscape)
If the TV is tuned to a restricted channel, the V-Chipwill block it. The screen will go blank and
thefollowing message will appear:
1. Enter your PIN, then press the ENTER[E# button and press the A or T button to
temporarily disable the V-Chip Lock.
%
If you forget the PIN, press the remote-control buttons in the following sequence, which resets
the pin to 0-0-0-0 : POWER (off) _ MUTE _ 8 _ 2 _ 4 _ POWER (on)
C3
Caption (On-Screen Text Messages)
Caption _ Off I On
You can switch the caption function on or off. Ifcaptions are not available, they will not bedisplayed on the screen.
Press the CO button on the remote control to turn the Caption on or off.
The Caption feature doesn't work in Component, HDMI or PC modes.
![](/html/9a/9a7f/9a7f9ac20a3dd2300cc8833200b1ec6ecf8659573ddb15f136c4f0ecbac3b5c1/bg1b.png)
Caption Mode
You can select the desired caption mode.
The availability of captions depends on the program being broadcast.
• Default I CC1~CC4 / Textl~Text4 (analog channels only)
The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device
to TV. (Depending on the broadcasting signal, the Analog Caption function mayoperate on digital channels.)
• Default I 001~0C4 / Textl~Text4 / Servicer~Service6 (digital channels only)
The Digital Captions function operates on digital channels.
Service1--6 in digital caption mode may not beavailable depending on the broadcast.
Digital Caption Options (digital channels only)
= Size: This option consists of Default, Small, Standard and Large. The default isStandard.
• Font Style: This option consists of Default, Style0 ~ Style 7. You can change the font youwant. The default is Style 0.
• Foreground Dolor: This option consists of Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. Youcan
change the color of the letter.The default is White.
• Background Dolor: This option consists of Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can
change the background color of the caption. The default is Black.
• Foreground Opacity: This option consists of Default, Transparent, Translucent, Solid and Flashing. Youcan change the
opacity ofthe letter.
• Background Opacity: This option consists of Default, Transparent, Translucent, Solid and Flashing. You can change the
background opacity of the caption.
• Return to Default: This option sets each of Size, Font Style, Foreground Color, Background color, Foreground Opacity
and Background Opacity to itsdefault.
The DigitaJ Caption Options are only enabled when the Caption Mode is Service 1 ~ Service 6. (If Caption Mode is the
default, the Digital Caption Options are enabled depending on the broadcast.)
The availability of captions depends on the program being broadcast.
Default means to follow the standard set by the broadcaster.
Foreground and Background cannot be set to have the same color.
Foreground Opacity and Background Opacity cannot be both setto Transparent.
C)
Melody _ Off / Low / Medium / High
A melody sound can be set to come onwhen the TV is powered On or Off.
The Melody does not play.
- When no sound is output from the TV because the MUTE button has been pressed.
- When no sound is output from the TV because the volume has been reduced to minimum with the VOL =button.
- When the TV is turned offby Sleep Timer function.
C)
Game Mode -_ Off / On
When connecting to a game console such as PlayStationTM or XboxTM, you can enjoy a more realistic gaming experience by
selecting the game menu.
Restrictions on game mode (Caution)
- To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu.
- If you display the TV menu in Game mode, the screen shakes slightly.
If Game Mode is On :
- Picture mode is automatically changed to Standard and cannot be changed.
- Sound mode is automatically changed to Custom andcannot be changed. Adjust the sound using the equalizer.
Game Mode is not available in regular TV and PC mode.
If the picture is poor when external device is connected to TV, check if Game Mode is On. Set Game Mode to Off and
connect external devices.
C)
Energy Saving -_ Off / Low / Medium / High / Auto
This feature adjusts the brightness of the TV inorder to reduce power consumption. When watching TV at night, set the Energy
Saving mode option to High to reduce eye fatigue aswell as power consumption.
![](/html/9a/9a7f/9a7f9ac20a3dd2300cc8833200b1ec6ecf8659573ddb15f136c4f0ecbac3b5c1/bg1c.png)
Configuring the input Menu
C) Source List
Use to select TV or other external inputsources such as DVD / Blu-rayplayers / Cable Box /
Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your
choice.
Press the SOURCE button on the remote control to view an external signal source.
TV,AV1, AV2, Component1, Component2, PC, HDMII/DVI, HDMI2, HDMI3, HDMt4.
You can choose only those external devices that are connected to the TV. Inthe Source
List, connected inputs will be highlighted and sorted to the top. Inputs that are not
connected will be sorted to the bottom.
Using the Color buttons on the remote with the Source list
- Red (Refresh): Refreshes the connected external devices. Press this ifyour Source is on and connected, but does not
appear in the list.
- TOOLS (Tools): Displays the Edit Name and information menus.
C) Edit Name
Name the device connected to the input jacks to make your input source selection easier.
VCR / DVD / Cable STB / Satellite 8TB / PVR 8TB / AV Receiver / Game / Camcorder / PC/ DVl PC / DVl/ TV / IPTV / Blu-ray
/ HD DVD / DMA
When a PC with a resolution of 1920 x I080@60Hz is connected to the HDMI IN I port, you should setthe HDMiI/DVl mode
to DVmPC inthe Edit Name of the input mode.
Configuring the Support Menu
C) Self Diagnosis
PictureTest
If you think you have a picture problem, perform the picture test. Check the color pattern on the
screen to see if the problem still exists.
• Yes: If the test pattern does not appear or there is noise inthe test pattern, select Yes.
There may be a problem with the TV. Contact Samsung's call center for assistance.
• No: Ifthe test pattern is properly displayed, select No. There may be a problem with your
external equipment. Please check your connections. Ifthe problem still persists, referto
the external device's user manual.
Sound Test
If you think you have a sound problem, please perform the sound test.You can check the
sound by playing a built-in melody sound through the TV. 'Does the problem still exist with this
sound test?' appears on the screen.
If you hear no sound from the TV's speakers, before performing the sound test, make sure Speaker Select is set to TV
speaker in the Sound menu.
The melody will be heard during the test even if Speaker Select is set to External Speaker orthe sound is muted bypressing
the MUTE button.
• Yes: If during the sound test you can hear sound only from one speaker or not at all, select Yes. There may be a problem with
the TV. Contact Samsung's call center for assistance.
• No: Ifyou can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check
your connections. If the problem still persists, refer to the external device's user manual.
Signal Strength (digital channels only)
Unlike analog channels, which can vary in reception quality from =snowy'to clear, digital (HDTV) channels have either perfect
reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can,
however, adjustyour antenna to improve the reception of available digital channels.
If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength.
Continue to adjust the antenna until you find the best position with the strongest signal.