Samsung LN32B460 - 31.5"" LCD TV, LN37B450, LN40B450, LN26B450, LN32B450 User Manual

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care center.

Contate a SAMSUNG EM TODO O MUNDO

Caso tenha dúvidas ou comentários sobre os produtos da Samsung,
entre em contato com o centro de atendimento ao cliente da SAMSUNG.

Country

Customer Care Center

Web Site

ARGENTINA 0800-333-3733 www.samsung.com/ar

BRAZIL

0800-124-421
4004-0000

www.samsung.com/br

CHILE 800-SAMSUNG(726-7864) www.samsung.com/cl
COLOMBIA 01-8000112112 www.samsung.com.co
COSTA RICA 0-800-507-7267 www.samsung.com/latin
ECUADOR 1-800-10-7267 www.samsung.com/latin
EL SALVADOR 800-6225 www.samsung.com/latin
GUATEMALA 1-800-299-0013 www.samsung.com/latin
HONDURAS 800-7919267 www.samsung.com/latin
JAMAICA 1-800-234-7267 www.samsung.com/latin
PANAMA 800-7267 www.samsung.com/latin
PUERTO RICO 1-800-682-3180 www.samsung.com/latin
REP. DOMINICA 1-800-751-2676 www.samsung.com/latin
NICARAGUA 00-1800-5077267 www.samsung.com/latin
MEXICO 01-800-SAMSUNG(726-7864) www.samsung.com/mx
TRINIDAD & TOBAGO 1-800-SAMSUNG(726-7864) www.samsung.com/latin
VENEZUELA 0-800-100-5303 www.samsung.com/latin

IMPORTADO POR:
AV. PRESIDENTE MASARIK #111 INT701
COL. CHAPULTEPEC MORALES C.P.11570
DELEGACION MIGUEL HIDALGO MEXICO. DISTRITO FEDERAL
Tel: [phone]

LCD TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at

www.samsung.com.br

Model Serial No.

BN68-01919B-00

BN68-01919B-Cover.indd 1 2009-04-10 �� 10:03:22

License

TruSurround HD, SRS and Symbol are trademarks of SRS Labs, Inc.
TruSurround HD technology is incorporated under license from SRS Labs, Inc.

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.
Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention

is also known as screen burn. To avoid such image retention, reduce the degree of brightness and contrast of the screen when
displaying a still image.

Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left,
right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game
console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the
Warranty.

Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To
prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

© 2009 Samsung Electronics Co., Ltd. All rights reserved.

❑

❑

English - 1

Contents

GENERAL INFORMATION

List of Features ..................................................................................2

Accessories .......................................................................................2

Viewing the Control Panel .................................................................3

Viewing the Connection Panel ........................................................... 4

Remote Control ................................................................................. 5

Installing Batteries in the Remote Control .........................................5

CONNECTIONS

Connecting VHF and UHF Antennas ................................................. 6

Connecting Cable TV......................................................................... 7

Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-

Top Box) via HDMI ............................................................................. 8

Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-

Top Box) via DVI ................................................................................ 8

Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box)

via Component cables ......................................................................................9

Connecting a Camcorder ................................................................... 9

Connecting a VCR ........................................................................... 10

Connecting a Digital Audio System .................................................10

Connecting an Amplier/DVD Home Theater ...................................11

Connecting a PC ............................................................................. 12

OPERATION

Viewing the menus ..........................................................................13

Placing Your Television in Standby Mode ........................................ 14

Plug & Play Feature ......................................................................... 14

CHANNEL

Channel Menu .................................................................................15

Managing Channels ......................................................................... 17

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

PICTURE

Picture Menu ................................................................................... 19

PC Display ....................................................................................... 23

Setting up the TV with your PC........................................................ 24

SOUND

Sound Menu ....................................................................................25

Connecting Headphones (Sold separately) ..................................... 26

SETUP

Setup Menu .....................................................................................27

INPUT / SUPPORT

Input Menu ....................................................................................... 30

Support Menu .................................................................................. 30

APPENDIX

Troubleshooting ............................................................................... 32

Installing the Stand .......................................................................... 33

Disconnecting the Stand .................................................................. 33

Wall Mount Kit Specications (VESA) .............................................34

Anti-Theft Kensington Lock ............................................................. 34

Securing the Installation Space ....................................................... 35

Securing the TV to the Wall ............................................................. 35

Specications .................................................................................. 36

GNU GENERAL PUBLIC LICENSE
END OF TERMS AND CONDITIONS
GNU Lesser General Public License (LGPL)
END OF TERMS AND CONDITIONS
LICENSE ISSUES

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

English

N O T

Symbol Note One-Touch Button TOOL Button Press

English - 2

GENERAL INFORMATION

List of Features

Adjustable picture settings that can be stored in the TV’s memory.
Automatic timer to turn the TV on and off.
A special sleep timer.
Excellent Digital Interface & Networking : With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no

Cable Box/Satellite receiver (Set-Top Box) needed.
HDMI/DVI connection of your PC to this TV.
Excellent Picture Quality
SRS TruSurround HD provides a virtual surround system.

Accessories

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
The items color and shape may vary depending on the model.

Remote Control & Batteries (AAA x 2) Power Cord Cover-Bottom

(M4 X L16)

Cleaning Cloth Stand Screw X 4 Warranty Card / Safety Guide

(M4 X L14) (M4 X L16)

Stand Screw X 3

(LN32B450)

Stand Screw X 4

(LN32B460)

¦

●

●

●

●

●

●

●

¦

N
N

English - 3

Viewing the Control Panel

The product color and shape may vary depending on the model.
You can use a button by pressing the side panel buttons.(LN26B450, LN32B450, LN37B450, LN40B450)
The front panel buttons can be activated by touching them with your finger.(LN32B460)

1

SOURCE E: Toggles between all the available input sources. In the on-screen menu, use this button as you use the

ENTERE button on the remote control.

2

MENU: Press to see an on-screen menu of your TV’s features.

3

+ VOL -: Press to increase or decrease the volume. In the on-screen menu, use the + VOL - buttons as you would use the ◄

and ► buttons on the remote control.

4 Z

: Press to change channels. In the onscreen menu, use the

Z

buttons as you would use the ▼ and ▲ buttons

on the remote control.

5 P

(POWER): Press to turn the TV on and off.

6

REMOTE CONTROL SENSOR: Aim the remote control towards this spot on the TV.

7

POWER INDICATOR: Blinks and turns off when the power is on and lights up in stand-by mode.

8

SPEAKERS

¦

N
N
N

1

2

3

4

5

6

7

88

LN26B450, LN32B450, LN37B450, LN40B450

LN32B460

English - 4

Viewing the Connection Panel

The product color and shape may vary depending on the model.

1 DIGITAL AUDIO OUT (OPTICAL)

Connects to a Digital Audio component such as a Home theater receiver.

2 PC IN

Connects to the video and audio output jacks on your PC.

3 PC/DVI AUDIO IN

Connect to the audio output jack on your PC.
DVI audio outputs for external devices.

4 ANT 1 IN (AIR) / ANT 2 IN (CABLE)

Connects to an antenna or cable TV system.

5 AUDIO OUT [R-AUDIO-L]

Connects to the audio input jacks on your Amplifier/Home theater.

6 HDMI IN 1(DVI), 2, 3

Connects to the HDMI jack of a device with an HDMI output.

No sound connection is needed for an HDMI to HDMI connection.
Use the HDMI IN 1(DVI) jack for DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter

(DVI to HDMI) for video connection and the PC / DVI AUDIO IN jacks for audio. When using an HDMI / DVI cable
connection, you must use the HDMI IN 1(DVI) jack.

7 KENSINGTON LOCK

The Kensington Lock (optional) is a device used to physically fix the system when used in a public place. If you want to use a
locking device, contact the dealer where you purchased the TV.

The location of the Kensington Lock may be different depending on its model.

8 SERVICE

Connector for service only.

9 COMPONENT IN 1, 2

Connects Component video / audio. The COMPONENT IN 1 jack is also used as the AV IN 1 jack.

Connect the video cable to the COMPONENT IN 1 [Y/VIDEO] jack and the audio cable to the COMPONENT IN 1 [R-

AUDIO-L] jacks.

AV IN 1, 2 [VIDEO] / [R-AUDIO-L]

Video and audio inputs for external devices, such as a camcorder or VCR.

¦

N

N
N

N

N

AV IN 2

9

1 2 3 4 5 6

8 7980

6

VIDEO

[TV Rear Panel]

[TV Side Panel]

Power Input

English - 5

0 H(HEADPHONE)

Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from the
built-in speakers will be disabled.

Using the sound function is restricted when connecting headphones to the TV.
Prolonged use of headphones at a high volume may damage your hearing.
You will not hear sound from the speakers when you connect headphones to the TV.
The headphone volume and TV volume are adjusted separately.

Remote Control

You can use the remote control up to a distance of about 23 feet from the TV.
The performance of the remote control may be affected by bright light.
The product color and shape may vary depending on the model.

1

POWER: Turns the TV on and off.

2

NUMERIC BUTTONS: Press to

change the channel.

3 _

: Press to select additional
channels (digital) being broadcast
by the same station. For example, to
select channel ‘54-3’, press ‘54’, then
press ‘_’ and ‘3’.

4

MUTE M: Press to temporarily cut off

the sound.

5 y

: Press to increase or

decrease the volume.

6

CH LIST: Used to display Channel

Lists on the screen.

7

TOOLS: Use to quickly select

frequently used functions.

8

INFO: Press to display information on

the TV screen.

9

COLOR BUTTONS: Use these

buttons in the Channel list menu, etc.

0

P.SIZE: Picture size selection.

!

TV: Selects the TV mode directly.

@

PRE-CH: Enables you to return to the

previous channel you were watching.

# z

: Press to change

channels.

$

SOURCE: Press to display and select

the available video sources.

%

FAV.CH: Press to switch to your

favorite channels.

^

MENU: Displays the main on-screen

menu.

&

RETURN: Returns to the previous

menu.

*

 UP▲/DOWN▼/LEFT◄/RIGHT►/

ENTERE: Use to select on-screen

menu items and change menu values.

(

EXIT: Press to exit the menu.

)

CC: Controls the caption decoder.

a

GUIDE: Electronic Programme Guide

(EPG) display

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the figure.

2.

Install two AAA size batteries.

Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside the
compartment.

3.

Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the
remote control for a long time. (Assuming typical TV usage, the batteries should last
for about one year.)

If the remote control doesn’t work, check the following:

Is the TV power on?
Are the plus and minus ends of the batteries reversed?
Are the batteries drained?
Is there a power outage or is the power cord unplugged?
Is there a special fluorescent light or neon sign nearby?

N
N
N
N

¦

N
N
N

¦

N

N

N











1

2

3
4

5

6

7

8

!

@

#

%

$

&

*

^

(

)
a

9
0

English - 6

CONNECTIONS

Connecting VHF and UHF Antennas

If your antenna has a set of leads that look like the diagram to the right, see ‘Antennas with 300

Ω Flat Twin Leads’ below.

If your antenna has one lead that looks like the diagram to the right, see ‘Antennas with 75 Ω

Round Leads’.
If you have two antennas, see ‘Separate VHF and UHF Antennas’.

Antennaswith300ΩFlatTwinLeads

If you are using an off-air antenna (such as a roof antenna or ‘rabbit ears’) that has 300Ω twin

flat leads, follow the directions below.

1.

Place the wires from the twin leads under the screws on a 300-75 Ω adapter (not

supplied). Use a screwdriver to tighten the screws.

2.

Plug the adaptor into the ANT 1 IN (AIR) terminal on the back of the TV.

Antennaswith75ΩRoundLeads

Plug the antenna lead into the ANT 1 IN (AIR) terminal on the back of the TV.

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine
the two antenna signals before connecting the antennas to the TV. This procedure requires an
optional combiner-adaptor (available at most electronics shops).

1.

Connect both antenna leads to the combiner.

2.

Plug the combiner into the ANT 1 IN (AIR) terminal on the bottom of the rear panel.

¦

ANT 1 IN (AIR)

ANT 1 IN (AIR)

ANT 1 IN (AIR)

UHF

VHF

UHF

VHF

English - 7

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

Plug the incoming cable into the ANT 2 IN (CABLE) terminal on the back of the TV.

Because this TV is cable-ready, you do not need a cable box to view unscrambled cable
channels.

Connecting to a Cable Box that Descrambles All Channels

1. Find the cable that is connected to the ANT OUT terminal on your cable box.

This terminal might be labeled ‘ANT OUT’, ‘VHF OUT’ or simply, ‘OUT’.

2.

Connect the other end of this cable to the ANT 2 IN (CABLE) terminal on the back of the
TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch and four lengths of RF cable. (These items are available at
most electronics stores.)

1. Find and disconnect the cable that is connected to the ANT IN terminal on your cable box.

This terminal might be labeled ‘ANT IN’, ‘VHF IN’ or simply, ‘IN’.

2.

Connect this cable to a two-way splitter.

3.

Connect an RF cable between the OUTPUT terminal on the splitter and the IN terminal on the cable box.

4.

Connect an RF cable between the ANT OUT terminal on the cable box and the B–IN terminal on the RF(A/B) switch.

5.

Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.

6.

Connect the last RF cable between the OUT terminal on the RF (A/B) switch and the ANT 2 IN (CABLE) terminal on the rear
of the TV.

After you have made this connection, set the A/B switch to the ‘A’ position for normal viewing. Set the A/B switch to the ‘B’
position to view scrambled channels. (When you set the A/B switch to ‘B’, you will need to tune your TV to the cable box’s
output channel, which is usually channel 3 or 4.)

¦

N

N

N

Splitter

Cable Box

Incoming cable

TV Rear

ANT 2 IN (CABLE)

RF (A/B) Switch

ANT 2 IN (CABLE)

ANT IN ANT OUT

ANT 2 IN (CABLE)

English - 8

Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via HDMI

This connection can only be made if there is an HDMI Output connector on the external device.

1. Connect an HDMI Cable between the HDMI IN 1(DVI), 2, 3 jack on the TV and the HDMI jack on the DVD Player or Cable Box

/ Satellite receiver (Set-Top Box).

What is HDMI?

HDMI(High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and video
signals using a single cable.

The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth
Digital Copy Protection) coding feature installed.

The TV may not output sound and pictures may be displayed with abnormal color when DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box) supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI
cable and there is no sound, connect the HDMI cable to the HDMI IN 1(DVI) jack and the audio cables to the PC/DVI
AUDIO IN jacks on the back of the TV. If this happens, contact the company that provided the DVD / Blu-ray player /
Cable Box / Satellite receiver (Set-Top Box) to confirm the HDMI version, then request an upgrade.

HDMI cables that are not 1.3 may cause annoying flicker or no screen display.

Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via DVI

This connection can only be made if there is a DVI Output connector on the external device.

1. Connect a DVI to HDMI Cable or DVI-HDMI Adapter between the HDMI IN 1(DVI) jack on the TV and the DVI jack on the DVD

/ Blu-ray player / Cable Box / Satellite receiver (Set-Top Box).

2.

Connect Audio Cables between the PC/DVI AUDIO IN jack on the TV and the DVD / Blu-ray player / Cable Box / Satellite
receiver (Set-Top Box).

Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.
When connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box), match the color of the connection

terminal to the cable.
Use the HDMI IN 1(DVI) jack for DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter

(DVI to HDMI) for video connection and the PC/DVI AUDIO IN jacks for audio. When using an HDMI / DVI cable
connection, you must use the HDMI IN 1(DVI) jack.

When using an HDMI / DVI cable connection, you must use the HDMI IN 1(DVI) jack.

¦

N





N

N

¦

N
N

N

N

TV Rear Panel

TV Side Panel

DVD / Blu-ray player / Cable Box /

Satellite receiver (Set-Top Box)

1

HDMI Cable (Not supplied)

or

DVD / Blu-ray player / Cable Box /

Satellite receiver (Set-Top Box)

TV Rear Panel

2

Audio Cable (Not supplied)

1

DVI to HDMI Cable (Not supplied)

English - 9

Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via Component cables

The rear panel jacks on your TV make it easy to connect a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) to
your TV.

1. Connect a Component Cable between the COMPONENT IN (1 or 2) [Y, PB, PR] jacks on the TV and the COMPONENT [Y, PB,

PR] jacks on the DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box).

2.

Connect Audio Cables between the COMPONENT IN (1 or 2) [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the
DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box).

Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and Pr (Red) for enhanced video quality.
Be sure to match the component video and audio connections. For example, if connecting a Component video cable to
COMPONENT IN 1, connect the audio cable to COMPONENT IN 1 also.

Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.
When connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box), match the color of the connection

terminal to the cable.

Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a camcorder to your TV.
They allow you to view the camcorder tapes without using a VCR.

1. Connect a Video Cable between the AV IN 2 [VIDEO] jack on the TV and the VIDEO OUT jack on the camcorder.

2.

Connect Audio Cables between the AV IN 2 [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the camcorder.

Each Camcorder has a different back panel configuration.
When connecting a Camcorder, match the color of the connection terminal to the cable.

¦

N

N
N

¦

N
N

TV Side Panel

1

Video Cable (Not supplied)

2

Audio Cable (Not supplied)

Camcorder

VIDEO

TV Rear Panel

DVD / Blu-ray player / Cable Box /

Satellite receiver (Set-Top Box)

2

Audio Cable (Not supplied)

1

Component Cable (Not supplied)

English - 10

Connecting a VCR

1. Connect a Video Cable between the AV IN 1 [Y/VIDEO] or AV IN 2 [VIDEO] jack on the TV and the VIDEO OUT jack on the

VCR.

2.

Connect Audio Cables between the AV IN (1 or 2) [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the VCR.

If you have a ‘mono’ (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks
of the TV. Alternatively, connect the cable to the ‘R’ jack. If your VCR is stereo, you must connect two cables.

Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable

(Yellow).

Connecting a Digital Audio System

The rear panel jacks on your TV make it easy to connect a Digital Audio System (Home theater/Receiver) to your TV.

1. Connect an Optical Cable between the DIGITAL AUDIO OUT (OPTICAL) jacks on the TV and the Digital Audio Input jacks on

the Digital Audio System.

When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack: Decrease the volume of the TV
and adjust the volume level with the system’s volume control.

5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
When the Home Theater receiver is set to On, you can hear sound output from the TV’s Optical jack. When the TV is

displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a
digital component such as a DVD / Blu-ray player / Cable Box / Satellite receiver (Set- Top Box) and is connected to the
TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver. If you want to hear 5.1 channel audio,
connect the digital audio out jack on DVD / Blu-ray player / Cable Box / Satellite receiver (Set- Top Box) directly to an
Amplifier or Home Theater, not the TV.

¦

N

N
N
N

¦

N

N
N

VIDEO

V

IDEOVIDEO

WY

Y

R

WR

Y

W R

TV Side Panel

2

Audio Cable (Not supplied)

VCR Rear Panel

1

Video Cable (Not supplied)

TV Rear Panel

Digital Audio System

1

Optical Cable (Not supplied)

TV Rear Panel

English - 11

Connecting an Amplifier/DVD Home Theater

1. Connect Audio Cables between the AUDIO OUT [R-AUDIO-L] jacks on the TV and Audio Input jacks on the Amplifier / DVD

Home Theater.

When an audio amplifier is connected to the AUDIO OUT [R-AUDIO-L] jacks: Decrease the volume of the TV and adjust
the volume level with the Amplifier’s volume control.

Each Amplifier/DVD Home Theater has a different back panel configuration.
When connecting an Amplifier/DVD Home Theater, match the color of the connection terminal to the cable.

¦

N

N
N

WRW R

1

Audio Cable (Not supplied)

Amplier/DVDHomeTheater

TV Rear Panel

English - 12

Connecting a PC

Using the D-Sub Cable

1. Connect a D-Sub Cable between PC IN connector on the TV and the PC output connector on your computer.

2.

Connect a PC Audio Cable between the PC/DVI AUDIO IN jack on the TV and the Audio Out jack of the sound card on your
computer.

When connecting a PC, match the color of the connection terminal to the cable.

Using the HDMI/DVI Cable

1. Connect an HDMI/DVI cable between the HDMI IN 1(DVI) jack on the TV and the PC output jack on your computer.

2.

Connect a 3.5 mm Stereo miniplug / 2RCA Cable between the PC/DVI AUDIO IN jack on the TV and the Audio Out jack of the
sound card on your computer.

When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) terminal.

Using the HDMI Cable

1. Connect an HDMI cable between the HDMI IN 2, 3 or HDMI IN 1(DVI) jack on the TV and the PC output jack on your

computer.

Each PC has a different back panel configuration.

¦

N

N

N

TV Rear Panel

PC

2

3.5 mm Stereo mini-plug/2RCA Cable (Not supplied)

1

HDMI/DVI Cable (Not supplied)

TV Rear Panel

1

HDMI Cable (Not supplied)

TV Side Panel

PC

or

TV Rear Panel

PC

2

PC Audio Cable (Not supplied)

1

D-Sub Cable (Not supplied)

English - 13

OPERATION

Viewing the menus

Before using the TV, follow the steps below to learn how to navigate the menu in order to select and adjust different functions.

Operation the OSD (On Screen Display)

The access step may differ depending on the selected menu.

1.

Press the MENU button.

2.

The main menu appears on the screen. The menu’s left side has icons : Picture, Sound,
Channel, Setup, Input, Application, Support.

3.

Press the ▲ or ▼ button to select one of the icons.

4.

Then press the ENTERE button to access the icon’s sub-menu.

5.

Press the ▲ or ▼ button to select the icon’s sub-menu.

6.

Press the ◄ or ► button to decrease or increase the value of a particular item. The

adjustment OSD may differ depending on the selected menu.

7.

Press the ENTERE button to complete the configuration. Press the EXIT button to exit.

¦

MENU Button

Display the main on-screen menu.

ENTERE / DIRECTION Button

Move the cursor and select an item.

Select the currently selected item.

Confirm the setting.

RETURN Button
Return to the previous menu.

EXIT

Exit the on-screen menu.

Backlight : 7
Contrast : 95

Brightness  :45  ►

Sharpness : 50

Color : 50

Tint (G / R) : G50 / R50

Advanced Settings

Picture Options

Picture Reset

Picture

Mode   :Standard ►

Backlight : 7

Contrast : 95

Brightness : 45

Sharpness : 50

Color : 50

Tint (G / R) : G50 / R50

Picture

U

Move

L

Adjust

E

Enter

R

Return

45

Brightness

Help icon

English - 14

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you
wish to interrupt viewing temporarily (during a meal, for example).

1.

Press the POWERP button on the remote control.

The screen is turned off and a red standby indicator appears on your set.

2.

To switch your set back on, simply press the POWERP button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to
unplug the set from the mains and aerial.

Plug & Play Feature

When the TV is initially powered on, basic settings proceed automatically and subsequently.

1.

Press the POWERP button on the remote control.

You can also use the POWERP button on the TV.
The message Selecione o idioma do menu is displayed.

2.

Press the ENTERE button. Press the ▲ or ▼ button to select the language, then press
the ENTERE button. The message Select ‘Home Use’ when installing this TV in your

home. is displayed.

3.

Press the ◄ or ► button to select Store Demo or Home Use, then press the ENTERE
button. The message Select the Antenna source to memorize. is displayed.

We recommend setting the TV to Home Use mode for the best picture in your home
environment.

Store Demo mode is only intended for use in retail environments.
If the unit is accidentally set to Store Demo mode and you want to return to Home Use (Standard): Press the volume

button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.

4.

Press the ▲ or ▼ button to memorize the channels of the selected connection. Press the ENTERE button to select Start.

Air: Air antenna signal. / Cable: Cable antenna signal. / Air + Cable: Air and Cable antenna signals.

If the antenna is connected to ANT 1 IN (AIR), select Air and if it is connected to ANT 2 IN (CABLE), select Cable.
If both ANT 1 IN (AIR) and ANT 2 IN (CABLE) are connected, select the Air + Cable.

5.

Press the ENTERE button to select Start. The TV will begin memorizing all of the available channels.

To stop the search before it has finished, press the ENTERE button with Stop selected.
After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then

reappears. Press the ENTERE button when channel memorization is complete. The message Set the Clock Mode. is
displayed.

6.

Press the ENTERE button. Press the ▲ or ▼ button to select Auto, then Press the ENTERE button. The message Select
the time zone in which you live. is displayed. If you select Manual, Set current date and time. is displayed.

7.

Press the ▲ or ▼ button to highlight the time zone for your local area. Press the ENTERE button. If you have received a
digital signal, the time will be set automatically. If not, select Manual to set the clock. (refer to page 27)

8.

The connection method to provide the best quality HD is offered. After confirming the method, press the ENTERE button.

9.

The message Enjoy your viewing is displayed. When you have finished, press the ENTERE button.

If you want to reset this feature...

1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup,
then press the ENTERE button.

2.

Press the ENTERE button again to select Plug & Play.
The Plug & Play feature is only available in the TV mode.
If a channel is locked using the Child Lock function, the PIN input window appears. (refer

to page 28)

¦

N

N

¦

N
N

N

N
N

N
N
N

N
N

N
N

Plug & Play

Selecione o idioma do menu

Idioma : Português ►

E

Entrar

Plug&Play   ►

Language : English

Time

Caption

Child Lock : On

Change PIN

Parental Lock

Setup

English - 15

CHANNEL

Channel Menu

Antenna→Air/Cable

Before your television can begin memorizing the available channels, you must specify the type
of signal source that is connected to the TV (i.e. an Air or a Cable system).

Press the TOOLS button to display the Tools menu. You can also set the Antenna by
selecting Tools→SwitchtoCable (or Switch to Air).

If the antenna is connected to ANT 1 IN (AIR), select Air and if it is connected to ANT 2 IN
(CABLE), select Cable.

If both ANT 1 IN (AIR) and ANT 2 IN (CABLE) are connected, select the antenna input
you want.

If the antenna input is not selected properly, noise may appear on the screen.

Auto Program

Air: Air antenna signal. / Cable: Cable antenna signal. / Air+Cable: Air and Cable antenna signals

If the antenna is connected to ANT 1 IN (AIR), select Air and if it is connected to ANT 2 IN (CABLE), select Cable.
If both ANT 1 IN (AIR) and ANT 2 IN (CABLE) are connected, select the Air+Cable.
If you want to stop Auto Programming, press the ENTERE button. The Stop Auto Program? message will be displayed.

Select Yes by pressing the ◄ or ► button, then press the ENTERE button.

Full Guide / Mini Guide

The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out
of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information
becomes available.

You can also display the guide menu simply by pressing the GUIDE button. (To configure the Default Guide, refer to the
descriptions.)

Full Guide

Displays the programme information as time ordered One hour segments. Two hours of programme information is displayed which
may be scrolled forwards or backwards in time.

Mini Guide

The information of each programme is displayed by each line on the current channel Mini Guide screen from the current
programme onwards according to the programme starting time order.

DefaultGuide→MiniGuide/FullGuide

You can decide whether to display either the Mini Guide or the Full Guide when the GUIDE button on the remote control is
pressed.

Channel List

For detailed procedures on using the Channel List, refer to the ‘Managing Channels’ instructions. (refer to pages 17~18)

You can select these options by simply pressing the CH LIST button on the remote control.

Fine Tune (analog channels only)

Use fine tuning to manually adjust a particular channel for optimal reception.

If you do not store the fine-tuned channel in memory, adjustments are not saved.
‘*’ will appear next to the name of fine-tuned channels.
To reset the fine tuning setting, press the ▼ button to select Reset, then press the ENTERE button.

LNA(LowNoiseAmplifier)→On/Off

If the TV is operating in a weak-signal area, the LNA function can improve the reception (a low-noise preamplifier boosts the
incoming signal).

LNA functions only when antenna is set to Air or Cable.
The LNA setting must be made separately for each channel.
If the picture is noisy with the LNA set to On, select Off.

¦

❑

T

N

N

N

❑

■

N
N
N

❑

O

■

■

❑

❑

O

❑

N
N
N

❑

N
N
N

Antenna  :Air  ►

Auto Program

Full Guide

Mini Guide

Default Guide : Full Guide

Channel List

Fine Tune

Channel

English - 16

ColorSystem→Auto/PAL-M/PAL-N/NTSC

Selects a color system suitable for the input video signals.

This function is available only in analog TV mode.

Using the Full / Mini Guide

To... Then...

Watch a programme in the EPG list Select a programme by pressing the ▲, ▼, ◄, ► button.
Exit the guide Press the blue button

If the next programme is selected, it is scheduled with the clock icon displayed. If the ENTERE button is pressed again, press
the ◄, ► button to select Cancel Schedules, the scheduling is cancelled with the clock icon gone.

View programme information Select a programme of your choice by pressing the ▲, ▼, ◄, ► button.

Then press the INFO button when the programme of your choice is
highlighted.
The programme title is on the upper part of the screen center.

Please click on INFO button for the detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video
Quality Information (HD / SD), Sound Modes, Subtitle or Teletext, languages of Subtitle or Teletext and brief summary of the
highlighted programme are included on the detailed information. “...” will be appeared if the summary is long.

Toggle between the Mini Guide and Full Guide Press the Red button repeatedly.
In Full Guide

Scrolls backwards quickly (24 hours).
Scrolls forwards quickly (24 hours).

Press the Green button repeatedly.
Press the Yellow button repeatedly.

In Mini Guide
Display previous page quickly.
Display next page quickly.

Press the Green button.
Press the Yellow button.

❑

N

Full Guide

DTV Air 04.1 SBT HD Wed, 7 May 3:14 pm
Freshmen On Campus
9:00 am - 9:30 am
Apresentado pelo jornalista Carlos Nascimento,

Today 8:00 am - 9:00 am 9:00 am - 10:00 am

Mint Extra
Loaded
Fresh 40 with Dynamite MC
The Distillery
Smash Hits! Sunday

02.1 CULTURA

04.1 SBT HD

05.1 Globo HD

07.1 Record HD

09.1 Read TV! HD

11.1 Gazeta HD

▼

Street Hypn..

Kisstory
No Information

No Information

No Information

Freshmen O..

Watch Information

◄◄►►

Page ■Mini Guide■ -2 Hours■ +2 Hours■ Exit

Mini Guide DTV Air 04.1 SBT HD

SBT Brasil
Realti Show

8:00 am
8:40 am
9:45 am

▼

Freshmen On Campus

Watch Information

◄◄►►

Page

■Full Guide■ Next Page■ Exit

English - 17

Managing Channels

Using this menu, you can add / delete or set favorite channels and use the program guide for digital broadcasts.

All Channels

Shows all currently available channels.

Added Channels

Shows all added channels.

Favorite

Shows all favorite channels.

To select the favorite channels you have set up, press the FAV.CH button on the remote
control.

Programmed

Shows all current reserved programs.

Select a channel in the All Channels, Added Channels or Favorite screen by pressing the ▲ / ▼ buttons, and pressing the

ENTERE button. Then you can watch the selected channel.

Using the Color buttons with the Channel List

Green (Zoom): Enlarges or shrinks a channel number.
Yellow (Select): Selects multiple channel lists. You can perform the add/delete or add to Favorite/delete from Favorite

function for multiple channels at the same time. Select the required channels and press the Yellow button to set all the
selected channels at the same time. The c mark appears to the left of the selected channels.

TOOLS (Tools): Displays the Add (or Delete), Add to Favorite (or Delete from Favorite), Lock (or Unlock), Timer
Viewing, Channel Name Edit, Select All (or Deselect All) and Auto Program menus (The Options menus may differ

depending on the situation.)

Channel Status Display Icons

c

: A channel selected by pressing the Yellow button.

(

: A program currently being broadcast.

*

: A channel set as a Favorite.

)

: A reserved program.

\

: A locked channel.

Channel List Option Menu (in All Channels / Added Channels / Favorite)

Press the TOOLS button to use the option menu.
Option menu items may differ depending on the channel status.

Add / Delete

You can delete or add a channel to display the channels you want.

All deleted channels will be shown on All Channels menu.
A gray-colored channel indicates the channel has been deleted.
The Add menu only appears for deleted channels.
You can also delete a channel from the Added Channels or Favorite menu in the same

manner.

Add to Favorite / Delete from Favorite

You can set channels you watch frequently as Favorite.

Press the TOOLS button to display the Tools menu. You can also set the add to (or delete from) Favorites by selecting Tools
→AddtoFavorite (or Delete from Favorite).

The ‘*’ symbol will be displayed and the channel will be set as a favorite.
All favorite channels will be shown on Favorite menu.

¦

■

■

■

O

■

N

N







N











N
N

■

N
N
N
N

■

T

N
N

04.1 SBT HD

05.1 TV GolboHD

07.1 Record HD

Added Channels

All ■ Zoom ■ Select T Tools

04.1 SBT HD

05.1 Globo HD

7 Air

09.1 Read TV! HD

11.1 Gazeta HD
13 Air
14 Air

16.1 MIXTV HD
19 Air

Added Channels

All ■ Zoom ■ Select T Tools

Delete
Add to Favourite
Timer Viewing
Channel Name Edit
Lock
Select All

▼

English - 18

Lock / Unlock

You can lock a channel so that the channel cannot be selected and viewed.

Press the TOOLS button to display the Tools menu. You can also set the lock (unlock) current channels by selecting Tools→
Lock Current Channel (or Unlock Current Channel).

This function is available only when the Child Lock is set to On. (refer to page 28)
The PIN number input screen appears. Enter your 4 digit PIN number.
The default PIN number of a new TV set is ‘0-0-0-0’. You can change the PIN, by
selecting Change PIN from the menu.
The ‘\’ symbol will be displayed and the channel will be locked.

Timer Viewing

If you reserve a program you want to watch, the channel is automatically switched to the reserved channel in the Channel List;
even when you are watching another channel. To reserve a program, set the current time first. (refer to page 27)

Only memorized channels can be reserved.
You can set the channel, day, month, year, hour and minute directly by pressing the number buttons on the remote control.
Reserving a program will be shown in the Programmed menu.
Digital Program Guide and Viewing Reservation

When a digital channel is selected, and you press the ► button, the Program Guide for the channel appears. You can reserve

a program according to the procedures described above.

Channel Name Edit (analog channels only)

Channels can labeled so that their call letters appear whenever the channel is selected.

The names of digital broadcasting channels are automatically assigned and cannot be labeled.

Select All / Deselect All

Select All: You can select all the channels in the channel list.
Deselect All: You can deselect all the selected channels.
You can only select Deselect All when there is a selected channel.

Auto Program

For detailed procedures on using the Auto Program. (refer to page 15)

Channel List Option Menu (in Programmed)

You can view, modify or delete a reservation.

Press the TOOLS button to use the option menu.

Change Info

Select to change a viewing reservation.

Cancel Schedules

Select to cancel a viewing reservation.

Information

Select to view a viewing reservation.
(You can also change the reservation information.)

Select All

Select all reserved program.

■

T

N
N
N
N
N

■

N
N
N
N

■

N

■

●

●

N

■

N

N

■

■

■

■

1 / 1 / 2009

3:48 pm 02.1 CULTURA.E

3:52 pm 04.1 SBT HD ) No Program Name

3:59 pm 05.1 Globo HD

) No Program Name

4:05 pm 07.1 Record HD

) No Program Name

Programmed

All ■ Zoom ■ Select T Tools E Information

Change Info
Cancel Schedules
Information
Select All

English - 19

PICTURE

Picture Menu

Mode

You can select the type of picture which best corresponds to your viewing requirements.

Press the TOOLS button to display the Tools menu. You can also set the picture mode by
selecting Tools→PictureMode.

Dynamic

Selects the picture for increased definition in a bright room.

Standard

Selects the picture for the optimum display in a normal environment.

Movie

Selects the picture for viewing movies in a dark room.

Backlight / Contrast / Brightness / Sharpness / Color / Tint(G/R)

Your television has several setting options that allow you to control the picture quality.

Backlight: Adjusts the brightness of LCD back light.
Contrast: Adjusts the contrast level of the picture.
Brightness: Adjusts the brightness level of the picture
Sharpness: Adjusts the edge definition of the picture.
Color: Adjusts color saturation of the picture.
Tint(G/R): Adjusts the color tint of the picture.

When you make changes to Backlight, Contrast, Brightness, Sharpness, Color or Tint(G/R) the OSD will be adjusted
accordingly.

In PC mode, you can only make changes to Backlight, Contrast and Brightness.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
The energy consumed during use can be significantly reduced if the brightness level of the picture is lowered, which will

reduce the overall running cost.

Advanced Settings

Samsung’s new TVs allow you to make even more precise picture settings than previous
models.

Advanced Settings is available in Standard or Movie mode.
In PC mode, you can only make changes to Gamma and White Balance from among the

Advanced Settings items.

BlackTone→Off/Dark/Darker/Darkest

You can select the black level on the screen to adjust the screen depth.

DynamicContrast→Off/Low/Medium/High

You can adjust the screen contrast so that the optimal contrast is provided.

Gamma

You can adjust the primary color (red, green, blue) intensity.

¦

❑

T

■

■

■

❑

●

●

●

●

●

●

N

N
N
N

❑

N
N

■

■

■

Mode   :Standard ►

Backlight : 7

Contrast : 95

Brightness : 45

Sharpness : 50

Color : 50

Tint (G / R) : G50 / R50

Picture

U

Move

L

Adjust

E

Enter

R

Return

7

Backlight

Advanced Settings

Black Tone : Off ►

Dynamic Contrast : Medium
Gamma : 0
Color Space : Native
White balance
Flesh Tone : 0
Edge Enhancement : On

U

Move E Enter R Return

English - 20

Color Space

Color space is a color matrix composed of red, green and blue colors. Select your favorite color space to experience the most
natural color.

Auto: Auto Color Space automatically adjusts to the most natural color tone based on program sources.
Native: Native Color Space offers deep and rich color tone.

White Balance

You can adjust the color temperature for more natural picture colors.

R-Offset: Adjusts the red color darkness.
G-Offset: Adjusts the green color darkness.
B-Offset: Adjusts the blue color darkness.
R-Gain: Adjusts the red color brightness.
G-Gain: Adjusts the green color brightness.
B-Gain: Adjusts the blue color brightness.
Reset: The previously adjusted white balance will be reset to the factory defaults.

Flesh Tone

You can emphasize the pink ‘flesh tone’ in the picture.

Changing the adjustment value will refresh the adjusted screen.

EdgeEnhancement→Off/On

You can emphasize object boundaries in the picture.

■

●

●

■

●

●

●

●

●

●

●

■

N

■

English - 21

Picture Options

In PC mode, you can only make changes to the Color Tone and Size from among the
items in Picture Options.

ColorTone→Cool/Normal/Warm1/Warm2

Warm1

or Warm2 is only activated when the picture mode is Movie.

Settings can be adjusted and stored for each external device you have connected to an
input of the TV.

Size

Occasionally, you may want to change the size of the image on your screen. Your TV comes with several screen size options, each
designed to work best with specific types of video input. Your cable box/satellite receiver may have its own set of screen sizes as
well. In general, though, you should view the TV in 16:9 mode as much as possible.

Alternately, you can press the P.SIZE button on the remote control repeatedly to change the picture size.

16:9 : Sets the picture to 16:9 wide mode.
Zoom1: Magnifies the size of the picture on the screen.
Zoom2: Magnifies the size of the picture more than Zoom1.
Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen.
4:3 : Sets the picture to 4:3 normal mode.
Screen Fit: Use the function to see the full image without any cut-off when HDMI (720p/1080i), Component (1080i) or DTV

(1080i) signals are input.

16:9 Zoom1 Zoom2

Wide Fit 4:3 Screen Fit

Temporary image retention may occur when viewing a static image on the set for more than two hours.
After selecting Zoom1, Zoom2 or Wide Fit: Press the ► button to Select Position, then press the ENTERE button. Press

the ▲ or ▼ button to move the picture up and down. Then press the ENTERE button. Press the ► button to Select Size,
then press the ENTERE button. Press the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then
press the ENTERE button.

After selecting Screen Fit in HDMI (1080i) or Component (1080i) mode, you made need to center the picture: Press the ◄ or

► button to select Position, then press the ENTERE button. Press the ▲, ▼, ◄ or ► button to move the picture.

Reset: Press the ◄ or ► button to select Reset, then press the ENTERE button. You can initialize the setting.

Settings can be adjusted and stored for each external device you have connected to an input of the TV.

Input Source Picture Size

ATV, AV, Component (480i, 480p) 16:9, Zoom1, Zoom2, 4:3

DTV(1080i), Component (1080i), HDMI (720p, 1080i) 16:9, 4:3, Wide Fit, Screen Fit

PC 16:9, 4:3

❑

N

■

N
N

■

O

●

●

●

●

●

●

N
N

N



N

16:9

Zoom1 U Move Zoom2 U Move

Wide Fit U Move

4:3 Screen Fit

Picture Options

Color Tone : Normal ►

Size : 16:9
Digital NR : Auto

HDMI Black Level : Normal

Film Mode : Off

U

Move E Enter R Return

English - 22

DigitalNR→Off/Low/Medium/High/Auto

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static
and ghosting that may appear on the screen.

When the signal is weak, select one of the other options until the best picture is displayed.

HDMIBlackLevel→Normal/Low

You can select the black level on the screen to adjust the screen depth.

This function is active only when an external device is connected to the TV via HDMI. The HDMI HDMI Black Level function
may not be compatible with all external devices.

FilmMode→Off/Auto

The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality.

Film mode is supported in TV, Video, Component (480i / 1080i) and HDMI (480i / 1080i).

PictureReset→ResetPictureMode/Cancel

Resets all picture settings to the default values.

Reset Picture Mode: Current picture values return to default settings.

■

N

■

N

■

N

❑

N

English - 23

PC Display

Setting Up Your PC Software (Based on Windows XP)

The Windows display-settings for a typical computer are shown below. The actual screens on
your PC will probably be different, depending upon your particular version of Windows and
your particular video card. However, even if your actual screens look different, the same basic
set-up information will apply in almost all cases. (If not, contact your computer manufacturer or
Samsung Dealer.)

1.

First, click on ‘Control Panel’ on the Windows start menu.

2.

When the control panel window appears, click on ‘Appearance and Themes’ and a display
dialog-box will appear.

3.

When the control panel window appears, click on ‘Display’ and a display dialog-box will
appear.

4.

Navigate to the ‘Settings’ tab on the display dialog-box.

The correct size setting (resolution) - Optimum: 1360 X 768 pixels
If a vertical frequency option exists on your display settings dialog box, the correct

value is ‘60’ or ‘60 Hz’. Otherwise, just click ‘OK’ and exit the dialog box.

Display Modes

If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system
doesn’t equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no
video. For the display modes listed on the next page, the screen image has been optimized during manufacturing.

D-Sub and HDMI/DVI Input

When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.

Mode Resolution

Horizontal Frequency

(KHz)

Vertical Frequency

(Hz)

Pixel Clock Frequency

(MHz)

Sync Polarity

(H / V)

IBM

640 x 350 31.469 70.086 25.175 +/­720 x 400 31.469 70.087 28.322 -/+

MAC

640 x 480 35.000 66.667 30.240 -/­832 x 624 49.726 74.551 57.284 -/-

VESA CVT

720 x 576 35.910 59.950 32.750 -/+
1280 x 720 44.772 59.855 74.500 -/+
1280 x 720 56.456 74.777 95.750 -/+

VESA DMT

640 x 480 31.469 59.940 25.175 -/-

640 x 480 37.500 75.000 31.500 -/-

640 x 480 37.861 72.809 31.500 -/-

800 x 600 37.879 60.317 40.000 +/+

800 x 600 46.875 75.000 49.500 +/+

800 x 600 48.077 72.188 50.000 +/+
1024 x 768 48.363 60.004 65.000 -/­1024 x 768 56.476 70.069 75.000 -/­1024 x 768 60.023 75.029 78.750 +/+
1360 x 768 47.712 60.015 85.500 +/+

VESA GTF

1280 x 720 52.500 70.000 89.040 -/+

¦





■

N

English - 24

Setting up the TV with your PC

Preset: Press the SOURCE button to select PC mode.

Auto Adjustment

Use the Auto Adjust function to have the TV automatically adjust the video signals it receives.
The function also automatically fine-tunes the settings and adjusts the frequency values and
positions.

Press the TOOLS button to display the Tools menu. You can also set the Auto Adjustment
by selecting Tools→AutoAdjustment.

This function does not work in DVI-Digital mode.

Screen

Coarse / Fine

The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone,
then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture
so that it is aligned on the center of screen.

PC Position

Adjust the PC’s screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to adjusting the Vertical-Position. Press
the ◄ or ► button to adjust the Horizontal-Position.

Image Reset

You can replace all image settings with the factory default values.

¦

N

❑

T

N

❑

■

■

■

Brightness : 45

Sharpness : 50

AutoAdjustment   ►

Screen

Advanced Settings

Picture Options

Picture Reset

Picture

English - 25

SOUND

Sound Menu

Mode→Standard/Music/Movie/ClearVoice/Custom

Press the TOOLS button to display the Tools menu. You can also set the sound mode by
selecting Tools→SoundMode.

Standard: Selects the normal sound mode.
Music: Emphasizes music over voices.
Movie: Provides the best sound for movies.
Clear Voice: Emphasizes voice over other sounds.
Custom: Recalls your customized sound settings.

Equalizer

The sound settings can be adjusted to suit your personal preference.

Mode: Selects the sound mode among the predefined settings.
Balance L/R: Adjusts the balance between the right and left speaker.
100Hz, 300Hz, 1KHz, 3KHz, 10KHz (Bandwidth Adjustment): To adjust the level of different bandwidth frequencies.
Reset: Resets the equalizer settings to the default values.

SRSTruSurroundHD→Off/On

TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers.
TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal
television speakers. It is fully compatible with all multichannel formats.

Audio Language

You can change the default value for audio languages. Displays the language information for the incoming stream.

Press the TOOLS button to display the Tools menu. You can also set the audio language by selecting Tools→Audio
Language.

While viewing a digital channel, this function can be selected.
You can only select the language among the actual languages being broadcast.

Multi-Track Sound (MTS) (analog channels only)

Press the TOOLS button to display the Tools menu. You can also set the Multi-Track Sound by selecting Tools→Multi-Track
Sound.

Mono: Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal.
Stereo: Choose for channels that are broadcasting in stereo.
SAP: Choose to listen to the Separate Audio Program, which is usually a foreign-language translation.
Multi-Track Sound is available only in Analog TV mode.
Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP.

AutoVolume→Off/On

Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is
changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the
modulation signal is high or by raising the sound output when the modulation signal is low.

Auto Volume is not available in Component and HDMI mode.

Speaker Select

When you watch TV with it connecting to a Home theater, turn the TV speakers off so you can listen to sound from the Home
theater’s (external) speakers.

External Speaker: Used to listen to the sound of the External (Home Theater) Speakers.
TV Speaker: Used to listen to the sound of the TV Speakers.
If you select External Speaker in the Speaker Select menu, the sound settings will be limited.

¦

❑

T

●

●

●

●

●

❑

●

●

●

●

❑

❑

T

N
N

❑

T

●

●

●

N
N

❑

N

❑

●

●

N

Mode   :Custom ►

Equalizer

SRS TruSurround HD : Off

Audio Language : - - -

Multi-Track Sound : Mono

Auto Volume : Off

Speaker Select : TV Speaker

Sound