SAMSUNG LN23T71B User Manual [en, es]

Contact SAMSUNG WORLD-WIDE
If you have any comments or questions regarding a Samsung products,
please contact the SAMSUNG customer care center.

Contate a SAMSUNG EM TODO O MUNDO
Caso tenha dúvidas ou comentários sobre os produtos da Samsung,
entre em contato com o centro de atendimento ao cliente da SAMSUNG.

Country

ARGENTINE

BRAZIL

CHILE

COSTA RICA

ECUADOR

EL SALVADOR

GUATEMALA

JAMAICA

MEXICO

PANAMA

PUERTO RICO

REP.DOMINICA

TRINIDAD &TOBAGO

VENEZUELA

IMPORTADO POR:SAMSUNG ELECTRONICS MÉXICO.S.A.de C.V.
Vía Lopez Portillo No.6,
Col.San Fco.Chilpan
Tultitlán,Estado de México,C.P.54940
TEL.[phone]

0800-333-3733

0800-124-421

800-726-7864 (SAMSUNG)

0-800-507-7267

1-800-10-7267

800-6225

1-800-299-0013

1-800-234-7267

01-800-SAMSUNG (7267864)

800-7267

1-800-682-3180

1-800-751-2676

1-800-7267-864

1-800-100-5303

Customer Care Center

Web Site

www.samsung.com/ar

www.samsung.com/br

www.samsung.com/cl

www.samsung.com/latin

www.samsung.com/latin

www.samsung.com/latin

www.samsung.com/latin

www.samsung.com/latin

www.samsung.com/mx

www.samsung.com/latin

www.samsung.com/latin

www.samsung.com/latin

www.samsung.com/latin

www.samsung.com/latin

LN23T71B

TFT-LCD TELEVISION

EXPORTADO POR:Samsung Electronics CO.,LTD.
416,Mae tan-3dong,Yeongtong -gu,
Suwon City,Gyeonggi-do Korea

Owner’s
Instructions

Register your product at
www.samsung.com/global/register

BN68-01001V-00

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.

This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen

• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.

To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

Precauciones al mostrar en la pantalla una imagen fija

La imagen fija puede causar daños permanentes en la pantalla del televisor.

• No deje una imagen fija en la pantalla LCD durante más de dos horas ya que se podría producir una retención de la imagen en la pantalla. Este fenómeno de

retención de imágenes también se denomina "quemadura de pantalla".
Para evitar que se produzca esa persistencia de la imagen, reduzca el nivel de luminosidad y de contraste de la pantalla cuando muestre imágenes fijas.

• El uso del televisor LCD en formato 4:3 durante un tiempo prolongado puede dejar rastros de bordes en las partes izquierda,

• Ver imágenes fijas de videojuegos y PC durante más tiempo del indicado puede producir restos de imágenes parciales.

Para evitar este efecto, reduzca el 'brillo' y el 'contraste' cuando vea imágenes fijas.

caused by the difference of light emission on the screen.
Playing a DVD or a game console may cause a similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.

derecha y central de la pantalla debido a las diferencias en la emisión lumínica de la pantalla.
La reproducción de un DVD o el uso de una consola de videojuegos pueden provocar un efecto similar en la pantalla.
Reproducir un DVD o una videoconsola puede causar un efecto similar en la pantalla. La garantía no cubre estos daños.

© 2006 Samsung Electronics Co., Ltd. All rights reserved.

Contents

GENERAL INFORMATION

List of Features .................................................................................. 2

Accessories........................................................................................ 2

Installing the Stand ............................................................................ 2

Installing the Wall Mount Kit ......................................................... 2

Viewing the Control Panel.................................................................. 3

Viewing the Connection Panel ........................................................... 4

Viewing the Remote Control .............................................................. 5

Installing Batteries in the Remote Control ......................................... 6

CONNECTIONS

Connecting VHF and UHF Antennas ................................................. 6

Connecting Cable TV ......................................................................... 7

Connecting a VCR ............................................................................. 8

Connecting an S-VHS VCR ............................................................... 8

Connecting a DVD Player .................................................................. 9

Connecting a DVD Player/Set-Top Box via DVI ................................ 9

Connecting a DVD Player/Set-Top Box via HDMI ............................. 10

Connecting a PC ................................................................................ 10

OPERATION

Turning the TV On and Off................................................................. 11

Plug and Play Feature ....................................................................... 11

Changing Channels ........................................................................... 12

Adjusting the Volume ......................................................................... 12

Viewing the Display............................................................................ 12

Selecting the Video Signal-source ..................................................... 13

Storing Channels Automatically ......................................................... 13

Storing Channels Manually ................................................................ 13

PICTURE CONTROL

Using Automatic Picture Settings ...................................................... 14

Customizing the Picture ..................................................................... 14

Adjusting the Color Tone.................................................................... 14

Resetting the Picture Settings to the Factory Defaults ...................... 15

Changing the Picture Size ................................................................. 15

Setting the Digital Noise Reduction (Digital NR) ............................... 15

Dynamic Contrast............................................................................... 15

Viewing Picture-in-Picture .................................................................. 16

SOUND CONTROL

Using Automatic Sound Settings .................................................. 16

Customizing the Sound ................................................................ 17

Choosing a Multi-Channel Sound (MTS) Soundtrack .................. 17

Using the Auto Volume ................................................................. 17

Listening to the Sound of the Sub (PIP) Picture .......................... 17

esetting the Sound Settings to the Factory defaults .................. 17

R

TIME SETTING

Setting the Clock .......................................................................... 18

Setting the Sleep Timer ............................................................... 18

Setting the On/Off Timer............................................................... 18

FUNCTION DESCRIPTION

Selecting a Menu Language ......................................................... 19

sing Game mode ........................................................................ 19

U

Viewing Closed Captions ............................................................. 19

Using the Energy Saving Feature ................................................ 19

Setting the Blue Screen Mode...................................................... 20

Selecting the Melody .................................................................... 20

Selecting the Source .................................................................... 20

Editing the Input Source Name .................................................... 20

PC DISPLAY

Setting Up Your PC Software (Based on Windows XP)............... 21

Display Modes .............................................................................. 21

Setting up the TV with your PC .................................................... 22

TROUBLESHOOTING

Identifying Problems ..................................................................... 23

APPENDIX

Specifications ............................................................................... 23

English

Symbol Press Important Note One-Touch

Button

English-1

General Information

List of Features

 Adjustable picture settings that can be stored in the TV’s memory.
 Dynamic Contrast: Automatically detects the input visual signal and adjusts to create optimum contrast.
 Automatic timer to turn the TV on and off.
 A special sleep timer.

Accessories

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

Remote Control & Batteries (AAA x 2)

Stand Stand Screw x 4 Owner’s Instructions

Power Cord Cover-Bottom

M4 X L16

Installing the Stand

< 2 > < 3 >

1. Place the TV faced down on a soft cloth or cushion on a table.

2. Put the stand into the hole at the bottom of the TV.

3. Insert screw into the hole indicated and tighten.

Warranty Card / Registration Card

/Safety Guide Manual

(Not available in all locations)

Installing the Wall Mount Kit

Wall mount items (sold separately) allow you to mount the TV on the
wall. For detailed information on installing the wall mount, see the
instructions provided with the Wall Mount items.
Contact a technician for assistance when installing the wall mounted
bracket.
Samsung Electronics is not responsible for any damage to the
product or injury to yourself or others if you elect to install the TV on
your own.

Remove the stand and cover the bottom hole with a cap and fasten
with two screws.

English-2

Viewing the Control Panel

The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu.
To use the more advanced features, you must use the remote control.

The product color and shape may vary depending on the model.

SOURCE

Toggles between all the available input sources
(TV, AV1, AV2, S-Video, Component1, Component2,
PC, HDMI).
In the on-screen menu, use this button as you would
use the ENTER button on the remote control.

MENU

Press to see an on-screen menu of your TV’s features.

Press to increase or decrease the volume.
In the on-screen menu, use the buttons as you
would use the

 and  buttons on the remote control.

English-3

Press to change channels.
In the on-screen menu, use the buttons as you
would use the  and  buttons on the remote control.

SPEAKERS

REMOTE CONTROL SENSOR

Aim the remote control towards this spot on the TV.

(POWER)

Press to turn the TV on and off.

POWER INDICATOR

Blinks and turns off when the power is on and lights up
in stand-by mode.

Viewing the Connection Panel

Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players.
For more information on connecting equipment, see pages 6-10.

HDMI/DVI IN, DVI IN (AUDIO R/L)

Connect to the HDMI jack of a device with an HDMI output. Use the HDMI/DVI terminal for DVI connection to an external device.
You should use the DVI to HDMI cable or DVI-HDMI adapter (DVI to HDMI) for video connection, and the DVI-IN ‘R-AUDIO-L’ terminal for audio.

HDMI/DVI IN terminal does not support PC.

No sound connection is needed for an HDMI to HDMI connection.

PC IN

Connect to the video and audio output jack on your PC.

ANT IN

Connect to an antenna or to a cable TV system.

HEADPHONE

Connect a set of external headphones for private listening.

AV IN

Video and audio inputs for external devices, such as a camcorder or VCR.

S-VIDEO

Connect an S-Video signal from a camcorder or VCR.

POWER INPUT

Connect the supplied power cord.

COMPONENT IN 1,2

Connect component video/audio.

KENSINGTON LOCK

The Kensington lock (optional) is a device used to physically fix the system when used in a public place.
If you want to use a locking device, contact the dealer where you purchased the TV.

English-4

Viewing the Remote Control

Turns the TV on and off.

Press to select channels directly on the TV.

Press to select additional channels (digital and analog) being broadcast by the same

station. For example, to select channel “54-3”, press “54”, then press “–” and “3”.

Press to increase or decrease the volume.

Press to temporarily cut off the sound.

Displays the main on-screen menu.

Use to select on-screen menu items and change menu values.

Adjust the TV sound by selecting one of the preset factory settings.
(or selects your personal, customized sound settings)

Adjust the TV picture by selecting one of the preset factory settings.
(or selects your personal, customized picture settings)

Press to select a time for the TV to turn off automatically.

Press to choose stereo, mono or Separate Audio Program (SAP)broadcast.

Press to automatically store selected Air/Cable channels.

Use to store and delete channels to/from memory.

Press to display information on the TV screen.

Input source selection

Returns to the previous channel.

CH

Press

Press to exit the on-screen menu.

Press to stop the action during a particular scene. Press again to resume normal video.

Press to change the screen size.

Picture-in-Picture ON/OFF.

Displays the available channels in sequence. (These buttons change channels in the
PIP window only.)

Press to set caption on/off.

The performance of the remote control may be affected by bright light.

buttons to change channels.

/

English-5

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the figure.

2. Install two AAA size batteries.

Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.

3. Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time.

The remote control can be used up to about 23 feet from the TV.

(Assuming typical TV usage, the batteries last for about one year.)

If the remote control doesn’t work, check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special fluorescent light or neon sign nearby?

Connections

Connecting VHF and UHF Antennas

If your antenna has a set of leads that look like this, see “Antennas with 300 ΩFlat Twin Leads” below.

If your antenna has one lead that looks like this, see “Antennas with 75
If you have two antennas, see “Separate VHF and UHF Antennas”.

Ω

Round Leads”.

Antennas with 300 Ω Flat T

win Leads

If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300 Ωtwin flat leads, follow the directions below.

1. Place the wires from the twin leads under the screws on a 300-75Ωadapter
(not supplied).
Use a screwdriver to tighten the screws.

ANT IN

2. Plug the adaptor into the ANT IN terminal on the back of the TV.

Antennas with 75 Ω Round Leads

ANT IN

1. Plug the antenna lead into the ANT IN terminal on the back of the TV.

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the
TV. This procedure requires an optional combiner-adaptor (available at most electronics shops).

1. Connect both antenna leads to the combiner.

UHF

VHF

2. Plug the combiner into the ANT IN terminal on the bottom of the rear panel.

ANT IN

UHF

VHF

English-6

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

ANT IN

Connecting to a Cable Box that Descrambles All Channels

ANT IN

ANT OUT

1. Plug the incoming cable into the ANT IN terminal on the back of the TV.

Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.

1. Find the cable that is connected to the ANT OUT terminal on your cable box.

This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.

ANT IN

2. Connect the other end of this cable to the ANT IN terminal on the back of the TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B)
switch, and four lengths of RF cable. (These items are available at most electronics stores.)

1. Find and disconnect the cable that is

ANT IN

Incoming

Incoming

Incoming

cable

Incoming

Incoming

cable

cable

Splitter

cable

cable

Splitter

Splitter

Splitter

Cable Box

Cable Box

Cable Box

Splitter

RF (A/B)

Switch

Cable Box

RF (A/B)

Switch

RF (A/B)

Switch

ANT IN

TV Rear

After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels.

(When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)

connected to the ANT IN terminal on your
cable box.

This terminal might be labeled “ANT IN”, “VHF IN” or

simply, “IN”.

2. Connect this cable to a two-way splitter.

3. Connect an RF cable between an OUTPUT

terminal on the splitter and the IN terminal on the
cable box.

4. Connect an RF cable between the ANT OUT
terminal on the cable box and the B–IN terminal
on the RF(A/B) switch.

5. Connect another cable between the other OUT
terminal on the splitter and the A–IN terminal on
the RF (A/B) switch.

6. Connect the last RF cable between the OUT
terminal on the RF (A/B) switch and the ANT IN
terminal on the rear of the TV.

English-7

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on
pages 6-7). Skip step 1 if you have not yet connected to an antenna or a cable system.

1. Unplug the cable or antenna

ANT IN

TV Rear Panel

VCR Rear Panel

2

5

Audio Cable (Not supplied)

4

Video Cable (Not supplied)

3

RF Cable (Not supplied)

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

Each external input source device has a different back panel configuration.
When connecting an external device, match the color of the connection terminal to the cable.

from the back of the TV.

2. Connect the cable or antenna to
the ANT IN terminal on the back
of the VCR.

3. Connect an RF Cable between
the ANT OUT terminal on the
VCR and the ANT IN terminal on
the TV.

4.

Connect a Video Cable between the
VIDEO OUT jack on the VCR and
the AV IN [VIDEO] jack on the TV.

5.

Connect Audio Cables between
the AUDIO OUT jacks on the
VCR and the AV IN [R-AUDIO-L]
jacks on the TV.

If you have a “mono” (non-stereo)

VCR, use a Y-connector

(not supplied) to hook up to the

right and left audio input jacks of

the TV. If your VCR is stereo,

you must connect two cables.

Connecting an S-VHS VCR

Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR.
(This connection delivers a better picture as compared to a standard VHS VCR.)

TV Rear Panel

VCR Rear Panel

3

Audio Cable (Not supplied)

S-Video Cable (Not supplied)

2

1

RF Cable (Not supplied)

An S-Video cable is usually included with an S-VHS VCR. (If not, check your local electronics store.)

Each external input source device has a different back panel configuration.
When connecting an external device, match the color of the connection terminal to the cable.

1. To begin, follow steps 1–3 in the
previous section to connect the
antenna or cable to your VCR
and your TV.

2. Connect an S-Video Cable
between the S-VIDEO OUT jack
on the VCR and the
AV IN [S-VIDEO] jack on the TV.

3.

Connect Audio Cables between
the AUDIO OUT jacks on the
VCR and the AV IN [R-AUDIO-L]
jacks on the TV.

English-8

Connecting a DVD Player

The rear panel jacks on your TV make it easy to connect a DVD player to your TV.

DVD Player Rear Panel

2

Audio Cable (Not supplied)

Component Cable (Not supplied)

1

Component video separates the video into Y (Luminance (brightness)), PB (Blue) and PR (Red)
for enhanced video quality.
Be sure to match the component video and audio connections.
For example, if connecting the video cable to COMPONENT IN,
connect the audio cable to COMPONENT IN also.
Each external input source device has a different back panel configuration.
When connecting an external device, match the color of the connection terminal to the cable.

TV Rear Panel

Connecting a DVD Player/Set-Top Box via DVI

This connection can only be made if there is a DVI Output connector on the external device.

DVD Player / Set-Top Box

TV Rear Panel

1. Connect a Component Cable
between the COMPONENT IN 1
or COMPONENT IN 2 [Y, P

B, PR]

jacks on the TV and the
COMPONENT [Y, P

B, PR] jacks

on the DVD player.

2. Connect Audio Cables
between the COMPONENT IN 1
or COMPONENT IN 2
[R-AUDIO-L] jacks on the TV and
the AUDIO OUT jacks on the
DVD player.

1. Connect a DVI to HDMI Cable
or DVI-HDMI Adapter between
the HDMI/DVI IN connector on
the TV and the DVI connector
on the DVD player/Set-Top Box.

2. Connect Audio Cables between
the DVI IN [R-AUDIO-L] jack on
the TV and the AUDIO OUT
jacks on the DVD player/
Set-Top Box.

2

Audio Cable (Not supplied)

1

DVI to HDMI Cable (Not supplied)

Each external input source device has a different back panel configuration.
When connecting an external device, match the color of the connection terminal to the cable.

English-9

Connecting a DVD Player/Set-Top Box via HDMI

This connection can only be made if there is an HDMI Output connector on the external device.

DVD Player Rear Panel

HDMI Cable (Not supplied)

What is HDMI?

• HDMI, or high-definition multimedia interface, is a next-generation interface that enables the
transmission of digital audio and video signals using a single cable without compression.

• “Multimedia interface” is a more accurate name for it especially because it allows multiple channels of
digital audio (5.1 channels).
The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP
(High Bandwidth Digital Copy Protection) coding feature installed, and supports multi-channel
digital audio.

Each external input source device has a different back panel configuration.
When connecting an external device, match the color of the connection terminal to the cabl

TV Rear Panel

e.

1. Connect an HDMI Cable
between the HDMI/DVI
connector on the TV and the
HDMI connector on the
DVD player/Set-Top Box.

Connecting a PC

TV Rear Panel

PC

2

PC Audio Cable (Not supplied)

1

D-Sub Cable (Not supplied)

Each external input source device has a different back panel configuration.
When connecting an external device, match the color of the connection terminal to the cable.

The HDMI/DVI jacks do not support PC connection.

1. Connect a D-Sub Cable
between PC IN [PC]
connector on the TV and the
PC output connector on your
computer.

2. Connect a PC Audio Cable
between PC IN [AUDIO] jack on
the TV and the Audio Out jack
of the sound card on your
computer.

English-10

Operation

Turning the TV On and Off

Plug and Play Feature

Press the POWER button on the remote control.
You can also use the

POWER button on the front of the panel.

When the TV is initially powered on, several basic settings proceed automatically and subsequently.
The following settings are available.

1. Press the POWER button on the remote control.

The message “Plug & Play” is displayed.

2. Select the appropriate language by pressing the  or  button.
Press the

ENTER button to confirm your choice.

3. The message “Check antenna input.” is displayed with “OK” selected.
Press the

ENTER button.

Please check that the antenna cable is connected correctly.

4. Press the  or  button to select “Air”, “STD”, “HRC”, or “IRC”, then press the ENTER button.

5. Press the ENTER button to select “Start”.

The channel search will start and end automatically.

After all the available channels are stored, the “Clock Set” menu appears.
Press the ENTER button at any time to interrupt the memorization process.

6. Press the ENTER button.
Press the
Set the “Hour”, “Minute” or “am/pm” by pressing the

 or  button to move to the “Hour”, “Minute” or “am/pm”.

 or  button.

7. Press the ENTER button to confirm your setting.
The message “Enjoy your watching.” is displayed.

• Language: Select your language.

• Air/Cable: Select your local cable company TV system.

• Auto Program: Selects between terrestrial antenna connection or your local cable company TV system.

• Clock Set: Sets the current time for the TV clock.

You can also set the hour and minute by pressing the number buttons on the remote control.

The TV automatically cycles through all of the available channels and stores them
in memory. This takes about one to two minutes.

If you want to reset this feature...

1. Press the MENU button to display the menu.
Press the

 or  button to select “Setup”, then press the ENTER button.

2. Press the ENTER button to select “Plug & Play”.

3. This will change or reset the settings.

English-11

Changing Channels

Adjusting the Volume

Using the Channel Buttons:

1. Press the CH or CH button to change channels.

When you press the CH or CH button, the TV changes channels in sequence.

You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels).

You will not see channels that were either erased or not memorized.

Using the PRE-CH Button to select the Previous Channel:

1. Press the PRE-CH button. The TV will switch to the last channel viewed.

To quickly switch between two channels that are far apart, tune to one channel, then use the number button

to select the second channel. Then use the PRE-CH button to quickly alternate between them.

1.

Press the VOL or VOL button to increase or decrease the volume.

Using MUTE button:

At any time, you can temporarily cut off the sound using the MUTE button.

1.

Press MUTE and the sound cuts off. The word “Mute” will appear in the lower-left corner of the screen.

2.

To turn mute off, press the MUTE button again, or simply press the VOL or VOL button.

Viewing the Display

Press the INFO button on the remote control to view current channel and the status of certain
audio-video settings.

Press the button once more or wait approximately 10 seconds and it disappears automatically.

English-12

Selecting the Video Signal-source

Storing Channels Automatically

Before your television can begin memorizing the available channels, you must specify the type of signal
source that is connected to the TV (i.e. an antenna or a cable system).

1. Press the MENU button to display the menu.
Press the

 or  button to select “Channel”, then press the ENTER button.

2. Press the ENTER button to select “Air/Cable”.

3. Press the  or  button to select the video signal source, then press the ENTER button.

4. Press the EXIT button to exit.

STD, HRC and IRC identify various types of cable TV systems.

Contact your local cable company to identify the type of cable system that exists in your particular area.

At this point, the signal source has been selected. Proceed to “Storing Channels Automatically”.

The TV automatically cycles through all of the available channels and stores them in memory.
This takes about one to two minutes.

1. To select the signal source, follow the “Selecting the Video Signal-source” instructions
number 1 to 3 on page

2. Press the  or  button to select “Auto Program”. Press the ENTER button.

3. Press the ENTER button. The channel search will start and end automatically.

Press the ENTER button at any time to interrupt the memorization process and return to the “Channel” menu.

4. After all the available channels are stored, the “Channel” menu reappears.

5. Press the EXIT button to exit.

Press the AUTO PROG. button on the remote control.

Storing Channels Manually

You can store up to 100 channels, including those received via cable networks.

1. Press the MENU button to display the menu.
Press the

 or  button to select “Channel”, then press the ENTER button.

2. Press the  or  button to select “Add/Delete”.
Press the

ENTER button.

3. Repeatedly pressing the ENTER button will alternate between add channel and delete channel.

4. Press the CH or CH button to switch to the appropriate channel, then repeat above.

5. Press the EXIT button to exit.

You can view any channel (including an erased channel) by using the number buttons on the remote control.

Use the number buttons to directly select the channel that will be added or erased.
Press the

ADD/DEL button on the remote control.

English-13