Page 1
IMPORTADO POR: SAMSUNG ELECTRONICS MÉXICO. S.A. de C.V.
Vía Lopez Portillo No. 6,
Col. San Fco. Chilpan
Tultitlán, Estado de México, C.P. 54940
TEL. 01-55-5747-5100 / 01-800-726-7864
LN23R41B
LN23R51B
LN26R51B
LN32R51B
EXPORTADO POR: Samsung Electronics CO.,LTD.
416, Mae tan-3dong, Yeongtong - gu,
Suwon City, Gyeonggi-do Korea
This device is a Class B digital apparatus.
Register your product at www.samsung.com/global/register
BN68-00883B-00
Page 2
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
•
Digital Ready TV: When you
select the regular screen (4:3)
mode to watch an SD-grade
digital broadcast (and the set-top
box output is 480p).
•
Digital Ready TV: When you
select the wide screen (16:9)
mode to watch an SD-grade
digital broadcast (and the set-top
box output is 1080i).
Although digital broadcasting must be in the
wide screen (16:9) HD format, broadcasters
sometimes show programs made originally
in the regular screen format (4:3) by
converting the signals into digital form, in
which case the left and right side edges of
the screen are cropped.
Note: If the borders at the left, right and the
center of the screen remain fixed for
an extended period of time, the
amount of light transmission will also
remain varied and as a result the
borders may leave traces.
Do not leave the screen in pause mode for
extended periods of time as you may
experience temporary or permanent image
burn.
•
Digital Ready TV: When the
TV receives HD-grade signals
(and the set-top box output is 1080i).
When you watch a digital HD-grade broadcast on a regular (4:3) TV with the screen
size "16:9" or "Panorama" selected, you will
be able to watch the program but the top and
bottom edges of the screen will be cropped.
Note: If the borders at the top, bottom and
the center of the screen remain fixed
for an extended period of time, the
amount of light transmission will also
remain varied and as a result the
borders may leave traces.
Do not leave the screen in pause mode for
extended periods of time as you may
experience temporary or permanent image
burn.
Page 3
• Integrated
(Wide-screen): When the TV
receives SD-grade (regular)
broadcasting signals (receives
480p regular signals).
•
Digital Ready TV
digital TV: When the TV receives
SD-grade (regular) broadcasting
signals (with a set-top box).
Digital TV
(wide-screen):
• When you watch an analog
(regular) broadcast on a
wide-screen TV (with the 4:3 screen
mode selected).
Although digital broadcasting must be in the
wide screen (16:9) HD format, broadcasters
sometimes show programs made originally
in the regular screen format (4:3) by
converting the signals into digital form, in
which case the left and right side edges of
the screen are cropped.
Note: If the borders at the left, right and the
center of the screen remain fixed for
an extended period of time, the
amount of light transmission will also
remain varied and as a result the
borders may leave traces.
Do not leave the screen in pause mode for
extended periods of time as you may
experience temporary or permanent image
burn.
•
When you watch a DVD, CD or a
video in wide-screen (21:9) format
on a wide-screen (16:9) TV.
• When you connect a computer or a
game console to the TV and select
the 4:3 screen mode.
If you connect a DVD player, computer or a
game console to the wide-screen TV and
watch a movie or play a game in regular
(4:3) or wide (21:9) screen mode, the left
and right side edges, or the top and bottom
edges of the screen will be cropped.
Note: If the borders at the left, right and the
center of the screen remain fixed for
an extended period of time, the
amount of light transmission will also
remain varied and as a result the
borders may leave traces.
Do not leave the screen in pause mode for
extended periods of time as you may
experience temporary or permanent image
burn.
Page 4
CONTENTS
Chapter 1: General Information
List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
List of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Familiarizing Yourself with Your New TV . . . . . . . . . . . . . . . . . . . . 2
Buttons on the Lower-Right Part of the Panel . . . . . . . . . . . . . . . 2
Rear Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing Batteries in the Remote Control . . . . . . . . . . . . . . . . . . . . . 6
If the remote control doesn’t work . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Chapter 2: Connections
Connecting VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . . . . 7
Antennas with 300-ohm Flat Twin Leads . . . . . . . . . . . . . . . . . . 7
Antennas with 75-ohm Round Leads . . . . . . . . . . . . . . . . . . . . . . 8
Separate VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . . . . 8
Connecting Cable TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Cable without a Cable Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Connecting to a Cable Box that Descrambles All Channels . . . . . 9
Connecting to a Cable Box that Descrambles Some Channels . . . 9
Connecting a VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connecting an S-VHS VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Connecting a DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Connecting a Digital TV Set-top box . . . . . . . . . . . . . . . . . . . . . . . 15
Connecting an Amplifier/DVD Home Theater . . . . . . . . . . . . . . . . 15
Connecting a DVD/Set-top box via DVI . . . . . . . . . . . . . . . . . . . . . 16
Connecting a DVD/Set-top box via HDMI . . . . . . . . . . . . . . . . . . . 17
Connecting a PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Chapter 3: Operation
Turning the TV On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Changing Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Using the Channel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Using the Number Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Using the PRE-CH Button to select the Previous Channel . . . . . 19
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Using Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Viewing the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Viewing the Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Plug & Play Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Memorizing the Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Selecting the Video Signal-source . . . . . . . . . . . . . . . . . . . . . . . 24
Storing Channels in Memory (Automatic Method) . . . . . . . . . . 25
Adding and Erasing Channels (Manual Method) . . . . . . . . . . . . 26
To Select the Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
To Edit the Input Source Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Chapter 4: Picture Control
Using Automatic Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Customizing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Adjusting the Color Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Changing the Screen Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Freezing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Digital Noise Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
DNIe (Digital Natural Image engine) . . . . . . . . . . . . . . . . . . . . . . . 35
Contents-1
Page 5
CONTENTS
My Color Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Easy Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Detail Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Dynamic Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Brightness Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Viewing Picture-in-Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Activating Picture-in-Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Selecting a Signal Source (External A/V) for PIP . . . . . . . . . . . 41
Swapping the Contents of the PIP and Main image . . . . . . . . . . 41
Changing the PIP Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Changing the Size of the PIP Window . . . . . . . . . . . . . . . . . . . . 42
Changing the Position of the PIP Window . . . . . . . . . . . . . . . . . 42
PIP Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Chapter 5: Sound Control
Using Automatic Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Customizing the Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Setting the TruSurround XT (SRS TSXT) . . . . . . . . . . . . . . . . . . . . 45
Choosing a Multi-Channel Sound (MTS) Soundtrack . . . . . . . . . . . 46
Automatic volume control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Selecting the Internal Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Selecting the Main or Sub (PIP) Sound . . . . . . . . . . . . . . . . . . . . . . 49
Chapter 6: Channel Control
Fine Tuning Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Chapter 7: PC Display
Using Your TV as a Computer (PC) Display . . . . . . . . . . . . . . . . . . 51
Setting Up Your PC Software (Based on Windows XP) . . . . . . . 51
How to Auto Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Adjusting the Screen Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Changing the Screen Position . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Initializing the Screen Position or Color Settings . . . . . . . . . . . . 55
Chapter 8: Time Setting
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Setting the On/Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Chapter 9: Function Description
Selecting a Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Viewing Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Setting the Blue Screen Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Selecting the Melody . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Chapter 10: Troubleshooting
Identifying Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Appendix
Installing the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Disconnecting the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Installing the Wall Mount Kit
(LN23R41B / LN23R51B / LN26R51B) . . . . . . . . . . . . . . . . . . . . 68
Installing the Wall Mount Kit (LN32R51B) . . . . . . . . . . . . . . . . . . 69
Using the Anti-Theft Kensington Lock . . . . . . . . . . . . . . . . . . . . . . 70
Using Your TV in Another Country . . . . . . . . . . . . . . . . . . . . . . . . . 70
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Display Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Contents-2
Page 6
Chapter 1
GENERAL I NFORMATION
List of Features
Excellent Picture Quality
- DNIe technology provides life-like clear images.
- My Color Control: Colors can be set to your preference by adjusting pink, blue and green.
-Dynamic Contrast: Automatically detects the input visual signal and adjusts to create
optimum contrast.
- Brightness Sensor: Adjusts the screen brightness automatically depending on the
brightness of the surrounding environment.
SRS TruSurround XT
- SRS TruSurround XT provides a virtual Dolby surround system.
Convenience
- The TV utilizes the HDMI system to implement perfect digital sound and picture quality.
- The Anynet system enables you to easily control Samsung audio-video (AV) devices from
this TV.
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
Remote Control
(BN59-00455A)
& Batteries (AAA x 2)
Cleaning Cloth
(BN63-01798A)
M4 X L16
Stand Screw
(6002-001294) x 4
Power Cord
Owner’s
Instructions
Cover-Bottom
(BN63-01674A)
English-1
Anynet Cable
(BN39-00518B)
Anynet AV
Owner’s
Instructions
Stand
(23”, 26” BN96-01727A)
(32” BN96-01733A)
Page 7
GENERAL I NFORMATION
Familiarizing Yourself with Your New TV
Buttons on the Lower-Right Part of the Panel
The buttons on the lower-right panel control your TV’s basic features, including the
on-screen menu. To use the more advanced features, you must use the remote control.
- LN23R51B
- LN26R51B
- LN32R51B
- LN23R41B
Note: The product color may vary depending on the model.
SOURCE
Displays a menu of all of the available
input sources (TV, AV1, AV2, S-Video,
Component 1, Component 2, PC, HDMI).
In the on-screen menu, use this button as you
use the ENTER button on the remote control.
MENU
Press to see an on-screen menu of
your TV’s features.
–
VOL +
Press to decrease or increase the volume.
I
n the on-screen menu, use the
you use the and buttons on the remote control.
–
VOL +
buttons as
CH
Press to change channels.
In the on-screen menu, use the CH buttons
as you use the and buttons on the remote
control. (Without the Remote Control, You can
turn on TV by using the Channel buttons.)
English-2
(POWER)
Press to turn the TV on and off.
POWER INDICATOR
Blinks and turns off when the power is on and
lights up in stand-by mode.
LIGHT DETECTING SENSOR
Adjusts the brightness of the screen
automatically by detecting brightness of the
surrounding environment. This sensor works
when the Brightness Sensor is on.
REMOTE CONTROL SENSOR
Aim the remote control towards this spot
on the TV.
SPEAKERS
Page 8
GENERAL I NFORMATION
Rear Panel Jacks
Use the rear panel jacks to connect an A/V component that will be connected
continuously such as a VCR or a DVD player.
For more information on connecting equipment, see pages 7-18.
COMPONENT IN 1, 2
Connect component video/audio from a
DVD/Set-top box.
PC IN
Connect to the video and audio output jack
on your PC.
SERVICE
Connector for service only.
AV I N
Video and audio inputs for external
devices, such as a camcorder or VCR.
S-VIDEO IN
Video inputs for external devices with an
S-Video output, such as a camcorder or VCR.
Anynet
Refer to “Anynet AV Owner’s Instructions”.
HEADPHONE JACK
Connect a set of external headphones for
private listening.
Speaker Audio Out
RF AV, S-Video
Internal Mute Off
Internal Mute On
Video No Signal
Speaker Output Speaker Output Speaker Output Sound Output Sound Output Sound Output
Mute Mute Mute Sound Output Sound Output Sound Output
Mute Mute Mute Mute Sound Output Sound Output
English-3
HDMI/DVI IN
Connect to the HDMI jack of a device with
HDMI output.
Use the HDMI/DVI terminal for DVI connection
to an external device. You should use the
DVI-to-HDMI cable or DVI-HDMI Adaptor
for the connection, and the ‘R -AUDIO -L’
terminal on DVI-IN for sound output.
(HDMI/DVI IN terminal does not support PC.)
AUDIO OUT
Connect to the audio input jack on your amplifier.
ANT IN
Connect to an antenna or to a cable TV system.
POWER INPUT
Connect the supplied power cord.
KENSINGTON LOCK
Refer to “Using the Anti-Theft Kensington Lock”
on page 70.
Component, PC, HDMI
RF
AV, S-VIDEO Component, PC, HDMI
Page 9
GENERAL I NFORMATION
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV.
When using the remote, always point it directly at the TV.
POWER
Turns the TV on and off. (See page 19)
STILL
Press to stop the action during a particular scene.
Press again to resume normal video. (See page 34)
NUMBER BUTTONS
Press to change the channel.
+100
Press to select channels over 100. For example,
to select channel 121, press “+100”, then press “2”
and “1”. (See page 19)
MUTE
Press to temporarily cut off the sound. (See page 20)
MENU
Displays the main on-screen menu. (See page 21)
CAPTION
Controls the caption decoder.
PIP
Picture-in-Picture ON/OFF.
SLEEP
Press to select a time for the TV to turn off
automatically. (See page 57)
PRE-CH
Tunes to the previous channel. (See page 19)
CH and CH (Channel UP/Down)
Press CH or CH to change channels.
(See page 19)
VOL + and VOL -
Press to increase or decrease the volume.
(See page 20)
SOURCE
Press to display all of the available video sources.
(See page 27)
INFO
Use to see information on the current broadcast.
(See page 21)
EXIT
Press to exit the menu.
UP / DOWN / LEFT / RIGHT / ENTER
Use to select on-screen menu items and change menu
values.
(See page 61)
(See page 40)
English-4
Page 10
GENERAL I NFORMATION
Anynet
Press the Anynet button to bring up the Anynet menu.
(Refer to “Anynet AV Owner’s Instructions”.)
S.MODE
Adjusts the TV sound by selecting one of the preset
factory settings (or selects your personal, customized
sound settings). (See page 43)
MTS
(Multi channel Television Stereo)
Press to choose stereo, mono or Separate Audio
Program (SAP broadcast). (See page 46)
AUTO PROG.
Press to automatically store selected TV/Cable channels.
(See page 25)
ADD/DEL
Use to store and delete channels to/from memory.
(See page 26)
DNIe
DNIe Demo On/Off.
Off : DNIe Demo mode is deactivated.
On : The right-hand side of the screen shows the improved
DNIe image.
The left-hand side of the screen shows the original
image.(See page 35)
VCR/DVD Functions
- Rewind - Stop
- Play/Pause - Fast Forward
(Anynet mode only)
SRS
Selects TruSurround XT mode. (See page 45)
P.MODE
Adjusts the TV picture by selecting one of the preset
factory settings. (See page 29)
P.SIZE
Press to change the screen size. (See page 33)
PC
Press to switch to the PC mode. (See pages 52~55)
SWAP
Press to interchange the main picture and the sub (PIP)
picture. (See page 41)
SIZE
Press to make the PIP window small, double1, double2.
(See page 42)
POSITION
Press to select the position of sub (PIP) picture.
(See page 42)
RESET
When your remote does not work, change the batteries
and press the RESET button for 2-3 seconds before use.
English-5
Page 11
GENERAL I NFORMATION
Installing Batteries in the Remote Control
1
Slide the cover out
completely.
2
Install two AAA size
batteries.
3
Replace the cover.
Make sure to match the “+” and
“
diagram inside the compartment.
Remove the batteries and store them
in a cool, dry place if you won’t be
using the remote control for a long
time.
The remote control can be used
up to about 23 feet from the TV.
(Assuming typical TV usage,
the batteries last for about one year.)
If the remote control doesn’t work
Check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?
–” ends of the batteries with the
English-6
Page 12
Chapter 2
CONNECTIONS
Connecting VHF and UHF Antennas
If your antenna has a set of leads that
look like this, see “Antennas with
300-ohm Flat Twin Leads” below.
If your antenna has one lead that looks
like this, see “Antennas with 75-ohm
Round Leads” on page 8.
If you have two antennas, see “Separate
VHF and UHF Antennas” on page 8.
Antennas with 300-ohm Flat Twin Leads
If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has
300-ohm twin flat leads, follow the directions below.
1
Place the wires from
the twin leads under
the screws on a 300-75
ohm adaptor
(not supplied).
Use a screwdriver to
tighten the screws.
2
Plug the adaptor into
the ANT IN terminal
on the back of the TV.
English-7
Page 13
CONNECTIONS
Antennas with 75-ohm Round Leads
1
Plug the antenna lead
into the ANT IN
terminal on the back
of the TV.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must
combine the two antenna signals before connecting the antennas to the TV. This
procedure requires an optional combiner-adaptor (available at most electronics shops).
1
Connect both antenna
leads to the combiner.
2
Plug the combiner into
the ANT IN terminal on
the back of the TV.
VHF
UHF
VHF
UHF
ANT IN
English-8
Page 14
CONNECTIONS
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
1
Plug the incoming
cable into the
ANT IN terminal
on back of the TV.
Connecting to a Cable Box that Descrambles All Channels
1
Find the cable that is
connected to the
ANT OUT terminal
on your cable box.
ANT IN
ANT OUT
Because this TV is cable-ready,
you do not need a cable box to
view unscrambled cable channels.
This terminal might be labeled
“ANT OUT”, “VHF OUT” or
simply, “OUT”.
2
Connect the other end
of this cable to the
ANT IN terminal on
the back of the TV.
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths
of RF cable. (These items are available at most electronics stores.)
1
Find and disconnect
the cable that is
connected to the
ANT IN terminal
on your cable box.
ANT IN
This terminal might be labeled
“ANT IN”, “VHF IN” or simply, “IN”.
English-9
Page 15
CONNECTIONS
2
Connect this cable
to a two-way splitter.
3
Connect an RF cable
between an OUTPUT
terminal on the splitter
and the IN terminal on
the cable box.
4
Connect an RF cable
between the ANT OUT
terminal on the cable
box and the B–IN
terminal on the A/B
switch.
Incoming
Incoming
cable
cable
Incoming
cable
Splitter
Splitter
Splitter
Cable Box
Cable Box
RF (A/B)
Switch
5
Connect another
cable between the
other OUT terminal on
the splitter and the
A–IN terminal on the
RF (A/B) switch.
Incoming
cable
Splitter
Cable Box
RF (A/B)
Switch
6
Connect the last
RF cable between the
OUT terminal on the
RF (A/B) switch and
the ANT IN terminal on
the rear of the TV.
Incoming
cable
Splitter
Cable Box
RF (A/B)
Switch
After you’ve made this connection, set the A/B switch to the “A” position for normal
viewing. Set the A/B switch to the “B” position to view scrambled channels.
(When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s
output channel, which is usually channel 3 or 4.)
English-10
ANT IN
TV Rear
Page 16
CONNECTIONS
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a
cable TV system (according to the instructions on pages 7-10).
Skip step 1 if you have not yet connected to an antenna or a cable system.
1
Unplug the cable or
antenna from the
back of the TV.
2
Connect the cable or
antenna to the
ANT IN terminal on the
back of the VCR.
VCR Rear Panel
3
Connect an RF cable
between the ANT OUT
terminal on the VCR
and the ANT IN terminal
on the TV.
Incoming Cable
or Antenna
VCR Rear Panel
TV Rear Panel
RF Cable (Option)
English-11
Page 17
CONNECTIONS
4
Connect an audio cable
between the AUDIO OUT
jacks on the VCR and the
AV IN [R-AUDIO-L] jacks
on the TV.
If you have a “mono” (non-stereo) VCR, use the Y-connector (not supplied) to hook up to the left
and right audio input jacks of the TV.
VCR Rear Panel
TV Rear Panel
Audio Cable (Option)
RF Cable (Option)
5
Connect a video cable
between the
VIDEO OUT jack on the
VCR and the AV IN
[VIDEO] jack on the TV.
VCR Rear Panel
TV Rear Panel
Audio Cable (Option)
Video Cable (Option)
RF Cable (Option)
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.
Each external input source device has a different back panel configuration.
*
* When connecting an external device, match the color of the connection terminal to the cable.
English-12
Page 18
CONNECTIONS
Connecting an S-VHS VCR
Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR.
(This connection delivers a better picture as compared to a standard VHS VCR.)
1
To begin, follow steps 1–3
in the previous section to
connect the antenna or
cable to your VCR and
your TV.
VCR Rear Panel
TV Rear Panel
RF Cable (Option)
2
Connect an audio cable
between the AUDIO OUT
jacks on the VCR and the
AV IN [R-AUDIO-L] jacks
on the TV.
VCR Rear Panel
TV Rear Panel
Audio Cable (Option)
RF Cable (Option)
3
Connect an S-Video cable
between the
S-VIDEO OUT jack on the
VCR and the S-VIDEO IN
jack on the TV.
An S-Video cable is usually included with an S-VHS VCR.
(If not, check your local electronics store.)
Each external input source device has a different back panel configuration.
*
* When connecting an external device, match the color of the connection terminal to the cable.
VCR Rear Panel
TV Rear Panel
Audio Cable (Option)
S-Video Cable (Option)
RF Cable (Option)
English-13
Page 19
CONNECTIONS
Connecting a DVD Player
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
1
Connect an audio cable
between the
COMPONENT IN 1 or
COMPONENT IN 2
[R-AUDIO-L] jacks on the
TV and the AUDIO OUT
jacks on the DVD player.
DVD Player Rear Panel
TV Rear Panel
Audio Cable (Option)
2
Connect a component
cable between the
COMPONENT IN 1 or
COMPONENT IN 2
[PR, PB, Y] jacks on the
TV and the COMPONENT
[Y, PB, PR] jacks on the
DVD player.
DVD Player Rear Panel
TV Rear Panel
Audio Cable (Option)
Component Cable (Option)
Note: For an explanation of Component video, see your DVD player owner's manual.
Be sure to match the component video and audio connections. For example,
if connecting the video cable to Component In 1, connect the audio cable to
Component In 1 also.
Each external input source device has a different back panel configuration.
*
* When connecting an external device, match the color of the connection terminal to the cable.
English-14
Page 20
CONNECTIONS
Connecting a Digital TV Set-top box
The connections for a typical Set-top box are shown below.
1
Connect an audio cable
between the
COMPONENT IN 1
COMPONENT IN 2
[R-AUDIO-L] jacks on the
TV and the AUDIO OUT
jacks on the Set-top box.
or
Set-Top Box Rear Panel
Audio Cable (Option)
2
Connect a component
cable between the
COMPONENT IN
COMPONENT IN
[PR, PB, Y] jacks on the
TV and the
COMPONENT [Y, PB, PR]
jacks on the Set-top box.
1 or
2
Set-Top Box Rear Panel
TV Rear Panel
TV Rear Panel
Audio Cable (Option)
Component Cable (Option)
Note: For an explanation of Component video, see your Set-top box owner's manual.
Each external input source device has a different back panel configuration.
*
* When connecting an external device, match the color of the connection terminal to the cable.
Connecting an Amplifier/DVD Home Theater
1
Connect an audio cable
between the AUDIO OUT
[R-AUDIO-L] jacks on the
TV and the AUDIO IN
jacks on the Amplifier/
DVD Home Theater.
Each external input source device has a different back panel configuration.
*
* When connecting an external device, match the color of the connection terminal to the cable.
Amplifier/DVD Home Theater
TV Rear Panel
Audio Cable (Option)
English-15
Page 21
CONNECTIONS
Connecting a DVD/Set-top box via DVI
This can be applied only if there is the DVI Output connector on the external device.
1
Connect a DVI-to-HDMI
cable or DVI-HDMI
adaptor between the
HDMI/DVI connector on
the TV and the DVI
connector on the DVD
player/Set-top box.
DVD Player Rear Panel
TV Rear Panel
DVI-to-HDMI Cable (Option)
2
Connect an audio cable
between the DVI IN
[R-AUDIO-L] jack on the
TV and the AUDIO OUT
jacks on the DVD
player/Set-top box.
DVD Player Rear Panel
TV Rear Panel
Audio Cable
(Option)
DVI-to-HDMI Cable (Option)
Each external input source device has a different back panel configuration.
*
* When connecting an external device, match the color of the connection terminal to the cable.
English-16
Page 22
CONNECTIONS
Connecting a DVD/Set-top box via HDMI
This can be applied only if there is the HDMI Output connector on the external device.
1
Connect an HDMI cable
between the HDMI/DVI
connector on the TV and
the HDMI connector on
the DVD player/Set-top
box.
Note: No sound connection is needed for an HDMI to HDMI connection.
What is HDMI?
•
HDMI, or high-definition multimedia interface, is a next-generation interface that enables the
transmission of digital audio and video signals using a single cable without compression.
•
“Multimedia interface” is a more accurate name for it especially because it allows multiple
channels of digital audio (5.1 channels).The difference between HDMI and DVI is that the
HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection)
coding feature installed, and supports multi-channel digital audio.
DVD Player Rear Panel
TV Rear Panel
HDMI Cable (Option)
English-17
Page 23
CONNECTIONS
Connecting a PC
1
Connect a PC video
cable(D-Sub) between
PC IN [PC] connector
on the TV and the PC
output connector on your
computer.
2
Connect a PC audio
cable between
PC IN [AUDIO] on the
TV and the Audio Out
of the sound card on
your computer.
TV Rear Panel
PC Video Cable (Option)
TV Rear Panel
PC Audio Cable (Option)
PC Video Cable (Option)
English-18
Page 24
Chapter 3
OPERATION
Turning the TV On and Off
1
Press the POWER button
on the remote.
You can also use the POWER
button on the front of the panel.
Changing Channels
Using the Channel Buttons
1
Press the CH
change channels.
/
buttons to
When you press the CH
You will see all the channels that the TV has memorized. (The TV must have
memorized at least three channels). You will not see channels that were either
erased or not memorized. See pages 24-25 to memorize channels.
Using the Number Buttons
buttons, the TV changes channels in sequence.
/
1
Press the number buttons to go directly to a channel.
ex) To select channel 27, press “ ” “ ”.
To select channel 108, press “ ” “ ” “ ”.
When you use the number buttons, you can directly select channels that were
either erased or not memorized. To change to single-digit channels (0~9) faster,
press “0” before the single digit. (For channel “4” press “0”, then “4”.)
Using the PRE-CH Button to select the Previous Channel
1
Press the PRE-CH button.
The TV will switch to the last
channel viewed.
To quickly switch between two channels that are far apart, tune to one channel,
then use the number button to select the second channel. Then use the PRE-CH
button to quickly alternate between them.
English-19
Page 25
OPERATION
Adjusting the Volume
1
Press the VOL + and VOL–buttons
to increase or decrease the volume.
Using Mute
At any time, you can temporarily cut off the sound using the MUTE button.
1
Press MUTE and the sound cuts off.
The word “ ” will appear
in the lower-left corner of the screen.
2
To turn mute off, press the MUTE button again, or simply
press the VOL + and VOL–buttons.
English-20
Page 26
OPERATION
Viewing the Display
The display identifies the current channel and the status
of certain audio-video settings.
1
Press the INFO button on the
remote control.
The TV will display the
channel, the type of sound,
and the status of certain
picture and sound settings.
Viewing the Menus
1
With the power on, press
the MENU button.
The main menu appears
on the screen.
It’s left side has five icons:
Input, Picture, Sound,
Channel, Setup.
Press the INFO button once more
or wait approximately 10
seconds and it disappears
automatically.
Allows the user to adjust the
settings according to his/her
preference and shows the
current settings.
The on-screen menus disappear
from the screen after about two
minutes.
2
Use the UP/DOWN buttons to select one of the 5 icons.
Then press the
ENTER button to access the icon’s sub-menu.
3
Press the EXIT button to exit.
English-21
Page 27
OPERATION
Plug & Play Feature
When the TV is initially powered on, several basic customer settings proceed
automatically and subsequently.
1
Press the POWER
button on the remote control.
The message
“Start Plug & Play” is
displayed with “OK” selected.
2
Select the appropriate
language by pressing the
UP/DOWN buttons.
Press the
to confirm your choice.
ENTER button
3
The message
“Check antenna input.” is
displayed with “OK” selected.
Press the
ENTER button.
4
Press the UP/DOWN
buttons to select “Air”, “STD”,
“HRC”, or “IRC”, then press
the ENTER button.
English-22
Page 28
OPERATION
5
Press the ENTER button
to select “Start”.
The TV will begin memorizing
all of the available channels.
6
Press the ENTER button.
Press the LEFT/RIGHT
buttons to move to the “Hour”,
“Minute” or “am/pm”.
Set the “Hour”, “Minute” or
“am/pm” by pressing the
UP/DOWN buttons.
(Refer to “Setting the Clock”
on page 56.)
To stop the search before it has
finished, press the
ENTER
button with “Stop” selected.
7
Press the MENU button
to confirm your setting.
The message
“Enjoy your watching.”
is displayed.
English-23
Page 29
OPERATION
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna)
and cable channels. After the available channels are memorized, use the CH and CH
buttons to scan through the channels. This eliminates the need to change channels by
entering the channel digits. There are three steps for memorizing channels: selecting a
broadcast source, memorizing the channels (automatic) and adding and deleting channels
(manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e. an antenna or a cable system).
1
Press the MENU button
to display the menu.
Press the
buttons to select “Channel”,
then press the ENTER
button.
UP/DOWN
2
Press the ENTER button.
Repeatedly press the
UP/DOWN buttons to
cycle through these choices:
“Air”, “STD”, “HRC”, or
“IRC” (all cable TV).
Press the
Note: STD, HRC and IRC identify various types of cable TV systems.
EXIT button to exit.
Contact your local cable company to identify the type of cable
system that exists in your particular area.
At this point, the signal source has been selected.
Proceed to “Storing Channels in Memory” (next page).
English-24
Page 30
OPERATION
Storing Channels in Memory (Automatic Method)
1
First, select the correct
signal source (Air, STD,
HRC, or IRC).
See steps 1~2 on the
previous page.
2
Press the UP/DOWN
buttons to select
“Auto Program”.
Press the
ENTER button.
3
Press the ENTER button
to select “Start”.
The TV will begin memorizing
all of the available channels.
The TV automatically cycles
through all of the available
channels and stores them in
memory. This takes about one
to two minutes.
Press the
any time to interrupt the
memorization process and return
to the “Channel” menu.
ENTER button at
4
After all the available
channels are stored, the
“Channel” menu reappears.
Press the
to exit.
Alternate method:
Press the AUTO PROG. button under the remote's cover.
EXIT button
English-25
To stop the search before it has
finished, press the
button with “Stop” selected.
ENTER
Page 31
OPERATION
Adding and Erasing Channels (Manual Method)
1
Press the MENU button
to display the menu.
Press the
buttons to select “Channel”,
then press the ENTER
button.
Press the
buttons to select
“Add/Delete”.
Press the
Press the CH or CH
button to select channel
that you wish to add or
delete.
Press the
to select “Add” or “Delete”
(Pressing the ENTER
button toggles between the
two).
Press the
UP/DOWN
UP/DOWN
ENTER button.
ENTER button
EXIT button to exit.
Alternate method:
Use the number buttons to directly select the channel that will
be added or erased. Press the
remote’s cover.
Repeatedly pressing the
“Add” and “Delete”. Press the EXIT button to exit.
You can view any channel (including an erased channel) by using the
number buttons on the remote control.
ADD/DEL button under the
ENTER button will alternate between
English-26
Page 32
OPERATION
To Select the Source
Use to select TV or another external input source connected to the TV.
Use to select the input source of your choice.
1
Press the MENU button
to display the menu.
Press the
to select “Input”.
ENTER button
2
Press the ENTER button.
Press the
buttons to select the Input
source, then press the
ENTER button.
UP/DOWN
Alternate method:
Press the SOURCE button on the remote control to view an
external signal source.
English-27
Page 33
OPERATION
To Edit the Input Source Name
Name the device connected to the input jacks to make your input source selection easier.
1
Press the MENU button
to display the menu.
Press the
to select “Input”.
Press the UP/DOWN
buttons to select
“Edit Name”, then press the
ENTER button.
ENTER button
2
Press the UP/DOWN
buttons to select
“AV1”, “AV2”, “S-Video”,
“Component1”, “Component2”,
“PC”, or “HDMI” input jack,
then press the
button.
ENTER
3
Press the UP/DOWN
buttons to select “VCR”,
“DVD”, “D-VHS”, “Cable
STB”, “HD STB”, “Satellite
STB”, “AV Receiver”,
“DVD Receiver”, “Game",
“Camcorder”, “DVD Combo”,
“DHR (DVD HDD Recoder)”,
or “PC” input source, then
press the
Press the
ENTER button.
EXIT button to exit.
English-28
Page 34
Chapter 4
PICTURE CONTROL
Using Automatic Picture Settings
Your TV has four automatic picture settings (“Dynamic”, “Standard”, “Movie”, and
“Custom”) that are preset at the factory. You can activate either Dynamic, Standard,
Movie, or Custom by pressing P.MODE (or by making a selection from the menu).
Or, you can select “Custom” which automatically recalls your personalized picture settings.
1
Press the MENU button
to display the menu.
Press the
buttons to select “Picture”,
then press the ENTER
button.
2
Press the ENTER button.
UP/DOWN
3
Press the ENTER button
again to select “Mode ”.
Press the
buttons to select
“Dynamic”, “Standard”,
“Movie”, or Custom”.
Press the
Press the
to exit.
Alternate method:
Simply press the P. MODE button on the remote control to
select one of the standard picture settings.
• Choose Dynamic to increase the clarity and sharpness of the picture.
• Choose
• Choose
• Choose
UP/DOWN
ENTER button.
EXIT button
Standard for the standard factory settings.
Movie when watching movies.
Custom if you want to adjust the settings according to personal
preference (see “Customizing the Picture, page 30).
English-29
Page 35
PICTURE CONTROL
Customizing the Picture
You can use the on-screen menus to change the contrast, brightness, sharpness,
color, and tint according to personal preference.
(Alternatively, you can use one of the “automatic” settings. See the previous page.)
1
Press the MENU button
to display the menu.
Press the UP/DOWN
buttons to select “Picture”,
then press the ENTER
button.
2
Press the ENTER button.
3
Press the UP/DOWN
button to select a particular
item(Contrast, Brightness,
Sharpness, Color, or Tint),
then press the
button.
ENTER
4
Press the LEFT/RIGHT
buttons to decrease or
increase the value of a
particular item.
For example, if you select
“Contrast”, pressing the
RIGHT button increases it.
Press the
EXIT button to exit.
The adjusted values are stored
according to the selected Picture mode.
You can select the option
(Contrast, Brightness, Sharpness,
Color, or Tint) to be adjusted
by pressing the
button.
UP/DOWN
English-30
Page 36
PICTURE CONTROL
Adjusting the Color Tone
You can change the color of the entire screen according to your preference.
1
Press the MENU button
to display the menu.
Press the
buttons to select “Picture”,
then press the ENTER
button.
UP/DOWN
2
Press the ENTER button.
3
Press the UP/DOWN
button to select “Color Tone”,
then press the ENTER
button.
4
Press the UP/DOWN
buttons to select
“Cool2”, “Cool1”, “Normal”,
“Warm1”, or “Warm2”.
Press the
Press the
to exit.
Resetting the Picture Settings to the Factory Defaults
Press the ENTER button
again to select “Mode ”.
Press the
buttons to select "Reset",
then press the ENTER
button.
ENTER button.
EXIT button
UP/DOWN
Choose from the following
Color Tone settings:
“Cool2”, “Cool1”,“Normal”,
“Warm1”, “Warm2” according
to personal preference.
The adjusted values are stored
according to the selected
Picture mode.
The “Reset” will be set for each
picture mode.
English-31
Page 37
PICTURE CONTROL
Changing the Screen Size
1
Press the MENU button
to display the menu.
Press the
buttons to select “Picture”,
then press the ENTER
button.
UP/DOWN
2
Press the UP/DOWN
buttons to select “Size”
then press the ENTER
button.
Only the wide and 4:3 sizes
can be selected when the
Source is PC.
3
Press the UP/DOWN
buttons to select “Wide”,
“Panorama”, “Zoom” or “4:3”.
Press the
to exit.
•Wide : Sets the picture to 16:9 wide mode.
• Panorama : Use this mode for the wide aspect ratio of a panoramic picture.
• Zoom : Magnifies the size of the picture on the screen.
•4 : 3 : Sets the picture to 4:3 normal mode.
EXIT button
[Positioning and Sizing the screen using Zoom]
• Resizing the screen using the Zoom enables the positioning
and sizing of the screen to up/down direction using the
or button as well as the screen size.
• Move the screen up/down using the or button after
selecting the by pressing the or button.
• Resize the screen vertically using the or button
after selecting the by pressing the or button.
(Pressing the button extends it upward and pressing
the button extends it downward.)
This is the standard TV screen size.
Supported screen resolution
modes may differ depending on
the model of the product.
English-32
Page 38
PICTURE CONTROL
Zoom
1
Press the UP/DOWN
buttons to select “Zoom”.
2
Select by pressing the
LEFT/RIGHT buttons.
Use the UP/DOWN
button to move the picture
up and down.
3
After selecting , use the
UP/DOWN button to
magnify or reduce the picture
size in a vertical direction.
Press the EXIT button
to exit.
Alternate method:
Press the P.SIZE button under the remote’s cover to change the
screen size.
English-33
Page 39
PICTURE CONTROL
Freezing the Picture
1
Press the STILL button to freeze a moving picture.
• Normal sound will still be heard.
Press again to cancel.
Digital Noise Reduction
If the broadcast signal received by your TV is weak, you can activate the Digital Noise
Reduction feature to help reduce any static and ghosting that may appear on the screen.
1
Press the MENU button
to display the menu.
Press the
buttons to select “Picture”,
then press the
button.
UP/DOWN
ENTER
2
Press the UP/DOWN
buttons to select
“Digital NR”, then press the
ENTER button.
3
Press the UP/DOWN
buttons to select “Off”.
Press the
to exit.
EXIT button
English-34
Page 40
PICTURE CONTROL
DNIe (Digital Natural Image engine)
Samsung’s new technology brings you more detailed images with contrast,
white enhancement and 3D noise reduction.
You can see how DNIe improves the picture by setting DNIe demo mode to On.
1
Press the MENU button
to display the menu.
Press the
buttons to select “Picture”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select
“DNIe Demo”, then press
the ENTER button.
UP/DOWN
This function doesn’t work when
Source is in PC mode.
3
Press the UP/DOWN
buttons to select “On”, then
press the ENTER button.
Press the
to exit.
Alternate method:
Press the DNIe button under the remote’s cover to change the
DNIe Demo mode.
• DNIe Demo: Off
• DNIe Demo: On
•
The “DNle Demo” is designed to show the difference between the regular and DNIe pictures.
• By default, the product displays the picture with DNle applied.
EXIT button
DNIe Demo mode is deactivated.
The right-hand side of the screen shows the improved DNIe image.
The left-hand side of the screen shows the original image.
English-35
Page 41
PICTURE CONTROL
My Color Control
My Color Control allows users to adjust colors to their preference by adjusting
Pink, Blue and Green using the predefined settings (Blue, Green, Pink, Standard,
and Custom) without affecting other colors on the screen.
Easy Control
1
Press the MENU button
to display the menu.
Press the UP/DOWN
buttons to select “Picture”,
then press the ENTER
button.
Press the
buttons to select
“My Color Control”, then
press the ENTER button.
UP/DOWN
2
Press the UP/DOWN
buttons to select
“Easy Control”, then press
the ENTER button.
3
Press the LEFT/RIGHT
buttons to select the desired
“My Color Control” color,
then press the ENTER
button.
Press the
to exit.
The sources are displayed in the following order: Blue-Green-Pink-Standard-Custom
*
EXIT button
This function doesn’t work
when the Source is in PC mode
or PIP is set to on.
This captures the current screen
in a still image to adjust the color.
The Original picture (before
adjustment) is shown on the left
side, while the selected mode is
shown on the right side.
English-36
Page 42
PICTURE CONTROL
Detail Control
1
Press the MENU button
to display the menu.
Press the
buttons to select “Picture”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select
“My Color Control”, then
press the ENTER button.
UP/DOWN
2
Press the UP/DOWN
buttons to select
“Detail Control”, then press
the ENTER button.
3
Press the UP/DOWN
buttons to select the desired
“My Color Control” color,
then press the ENTER
button.
Press the
buttons to increase or
decrease the value of a
particular item.
Press the EXIT button
to exit.
LEFT/RIGHT
This function doesn’t work
when the Source is in PC mode
or PIP is set to on.
This captures the current screen
in a still image to adjust the color.
To reset the “Detail Control”,
select “Reset” by pressing the
UP/DOWN button and
then press the
ENTER button.
The sources are displayed in the following order: Pink-Green-Blue-Reset
*
English-37
Page 43
PICTURE CONTROL
Dynamic Contrast
Dynamic Contrast detects the visual signal input and adjusts to create optimum contrast.
1
Press the MENU button
to display the menu.
Press the
buttons to select “Picture”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select
“Dynamic Contrast”, then
press the ENTER button.
UP/DOWN
This function doesn’t work
when the Source is in PC mode
or PIP is set to on.
3
Press the UP/DOWN
buttons to select “Off”.
Press the
to exit.
EXIT button
English-38
Page 44
PICTURE CONTROL
Brightness Sensor
The Brightness Sensor adjusts the screen brightness automatically by using
a light detecting sensor.
1
Press the MENU button
to display the menu.
Press the
buttons to select “Picture”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select
“Brightness Sensor”, then
press the ENTER button.
UP/DOWN
This function doesn’t work
when the Source is in PC mode.
3
Press the LEFT/RIGHT
buttons to select “On”.
Press the
EXIT button to exit.
Screen brightness is adjusted
automatically depending on the
brightness of the surrounding
environment.
English-39
Page 45
PICTURE CONTROL
Viewing Picture-in-Picture
This product has one built-in tuner, which does not allow PIP to function in the same mode.
For example, you cannot watch one TV channel in the main screen, and a different one in
the PIP screen. Please see ‘PIP Settings’ below for details.
You can use the PIP feature to simultaneously watch two video sources.
Activating Picture-in-Picture
1
Press the MENU button
to display the menu.
Press the
buttons to select “Picture”,
then press the ENTER
button.
Press the
buttons to select “PIP”,
then press the ENTER
button.
UP/DOWN
UP/DOWN
2
Press the ENTER button.
Press the
buttons to select “On”.
Press the
Alternate method:
Press the PIP button on the remote control repeatedly to activate or
deactivate the PIP.
UP/DOWN
ENTER button.
If you turn the TV off while
watching in PIP mode and
turn it on again, the PIP
window will disappear.
English-40
Page 46
PICTURE CONTROL
Selecting a Signal Source (External A/V) for PIP
3
Press the UP/DOWN
buttons to select “Source”,
then press the ENTER
button.
Select the source of the sub
picture (PIP) by pressing the
UP/DOWN buttons and
press the ENTER button.
[PC/HDMI modes only]
Swapping the Contents of the PIP and Main image
4
Press the UP/DOWN
buttons to select “Swap”,
then press the ENTER
button.
When the main picture is set to TV/
AV1/AV2/S-Video/Component1/
Component2, only HDMI can be
selected and when the main picture
is set to PC/HDMI, only TV/AV1/
AV2/S-Video/Component1/
Component2 can be selected.
Source selection is possible only
when PC or HDMI is connected.
If main picture is in PC Mode,
“Swap” is not available.
Alternate method:
Press the SWAP button under the remote's cover.
Changing the PIP Channel
5
Press the UP/DOWN
buttons to select “Channel”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select the desired
channel in the PIP window.
[PC/HDMI modes only]
English-41
Page 47
PICTURE CONTROL
Changing the Size of the PIP Window
6
Press the UP/DOWN
buttons to select “Size”, then
press the ENTER button.
Press the
UP/DOWN
buttons to select the desired
size of the PIP window.
Press the
ENTER button.
Alternate method:
Press the SIZE button under the remote's cover.
Changing the Position of the PIP Window
7
Press the UP/DOWN
buttons to select “Position”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select the desired
PIP window position.
Press the
Press the
ENTER button.
EXIT button to exit.
If main picture is in PC Mode,
“Size” is not available.
Alternate method:
Press the POSITION button under the remote's cover.
PIP Settings
Sub Picture
Main Picture
TV
AV1
AV2
S-Video
Component1
Component2
PC
HDMI
AV1
X
X
X
X
X
X
O
O
AV2
X
X
X
X
X
X
O
O
X
X
X
X
X
X
O
O
X
X
X
X
X
X
O
O
X
X
X
X
X
X
O
O
O : PIP operates
X : PIP doesn’t operate
PC HDMIComponent2Component1S-VideoTV
X
X
X
X
X
X
O
O
X
X
X
X
X
X
X
X
O
O
O
O
O
O
X
X
• When the PC is in energy saving mode, you cannot choose the PIP option.
•You may notice that the picture in the PIP window becomes slightly unnatural when you use
the main screen to view a game or karaoke.
•You can adjust picture position only by using the size menu.
English-42
Page 48
Chapter 5
SOUND CONTROL
Using Automatic Sound Settings
Your TV has five automatic sound settings (“Standard”, “Music”, “Movie”, “Speech”, and
“Custom”) that are preset at the factory. You can activate any of them by pressing the
S.MODE button (or by making a selection from the on-screen menu).
Or, you can select “Custom”, which automatically recalls your personalized sound settings.
1
Press the MENU button
to display the menu.
Press the
buttons to select “Sound”,
then press the ENTER
button.
Press the
2
Press the UP/DOWN
buttons repeatedly to select
the “Standard”, “Music”,
“Movie”, “Speech”, or
“Custom”
Press the
to exit.
UP/DOWN
ENTER button.
sound settings.
EXIT button
Alternate method:
Simply press the S.MODE button on the remote control to select
one of the standard sound settings.
• Choose Standard for the standard factory settings.
• Choose
• Choose
• Choose
• Choose
Music when watching music videos or concerts.
Movie when watching movies.
Speech when watching a show that is mostly dialog (i.e. news).
Custom to recall your personalized settings.
English-43
Page 49
SOUND CONTROL
Customizing the Sound
The sound settings can be adjusted to suit your personal preference.
(Alternatively, you can use one of the “automatic” settings. See the previous page.)
1
Press the MENU button
to display the menu.
Press the
buttons to select “Sound”,
then press the ENTER
button.
UP/DOWN
2
Press the UP/DOWN
buttons to select “Equalizer”,
then press the ENTER
button.
3
Press the LEFT/RIGHT
buttons to select a particular
frequency to be changed.
Press the
buttons to increase or
decrease the value of a
particular item.
Press the
to exit.
Note: The Custom setting allows you to adjust frequencies to your preference.
UP/DOWN
EXIT button
The lowest frequency is 100 and 10K is the highest.
If you make any changes to
these settings, the Sound Mode
is automatically switched to
“Custom”.
English-44
Page 50
SOUND CONTROL
Setting the TruSurround XT (SRS TSXT)
Emphasizes midrange and bass and provides a simulated surround-sound experience.
1
Press the MENU button
to display the menu.
Press the
buttons to select “Sound”,
then press the ENTER
button.
UP/DOWN
2
Press the UP/DOWN
buttons to select
“SRS TSXT”, then press
the ENTER button.
3
Press the UP/DOWN
buttons to select “Off”,
“3D Mono” or “Stereo” than
Press the ENTER button.
Press the EXIT button
to exit.
Alternate method:
Simply press the SRS button on the remote control to change the
“SRS TSXT” settings.
TRADEMARK & LABEL LICENSE NOTICE
TruSurround XT, SRS and symbol are trademarks of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs, Inc.
English-45
Page 51
SOUND CONTROL
Choosing a Multi-Channel Sound (MTS) Soundtrack
Depending on the particular program being broadcast, you can listen to stereo, mono or
a Separate Audio Program. (SAP audio is usually a foreign-language translation.
Sometimes SAP has unrelated information like news or weather).
1
Press the MENU button
to display the menu.
Press the
buttons to select “Sound”,
then press the ENTER
button.
UP/DOWN
2
Press the UP/DOWN
buttons to select “MTS”,
then press the ENTER
button.
3
Press the UP/DOWN
buttons
“Stereo” or “SAP”, then
press the ENTER button.
Press the
Alternate method:
Simply press the MTS button on the remote control to change the
MTS settings.
• Choose Mono for channels that are broadcasting in mono, or if you are having
to select “
Mono”,
EXIT button to exit.
When you change channels,
MTS is set to “Stereo”
automatically.
difficulty receiving a stereo signal.
• Choose Stereo for channels that are broadcasting in stereo.
• Choose SAP to listen to the Separate Audio Program, which is usually a
foreign-language translation.
English-46
Page 52
SOUND CONTROL
Automatic volume control
Reduces the differences in volume level among broadcasters.
1
Press the MENU button
to display the menu.
Press the
buttons to select “Sound”,
then press the ENTER
button.
UP/DOWN
2
Press the UP/DOWN
buttons to select
“Auto Volume”, then press
the ENTER button.
3
Press the UP/DOWN
buttons to set
Auto Volume “On”.
Press the
to exit.
EXIT button
English-47
Page 53
SOUND CONTROL
Selecting the Internal Mute
Sound output from the TV speakers is muted.
1
Press the MENU button
to display the menu.
Press the
buttons to select “Sound”,
then press the ENTER
button.
UP/DOWN
2
Press the UP/DOWN
buttons to select
“Internal Mute”, then press
the ENTER button.
3
Press the UP/DOWN
buttons to select “On”, Then
Press the ENTER button.
Press the
to exit.
EXIT button
When “Internal mute” is set to
“On”, Sound menus except
“MTS” and “Sound Select”
cannot be adjusted.
English-48
Page 54
SOUND CONTROL
Selecting the Main or Sub (PIP) Sound
You can select either Main or Sub sound when PIP is On.
1
Press the MENU button
to display the menu.
Press the UP/DOWN
buttons to select “Sound”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select
“Sound Select”, then press
the ENTER button.
3
Press the UP/DOWN
buttons to select “Main” or
“Sub”.
Select “Main” to hear the
main TV sound and select
“Sub” to hear the PIP
window sound.
Press the
to exit.
EXIT button
English-49
Page 55
Chapter 6
CHANNEL C ONTROL
Fine Tuning Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
1
Press the MENU button
to display the menu.
Press the
buttons to select “Channel”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select
“Fine Tune”, then press
the ENTER button.
UP/DOWN
3
Press the LEFT/RIGHT
buttons to adjust the
fine tuning.
4
To store the fine tuning
setting in the TV’s memory,
press the ENTER button.
Press the
EXIT button to exit.
If you do not store the fine-tuned
channel in memory, adjustments
are not saved.
Fine tuned channels that have
been saved are marked with an
asterisk “*” on the right-hand
side of the channel number in the
channel banner.
Press the UP/DOWN button
to select “Reset”, than press the
ENTER button.
English-50
Page 56
Chapter 7
PC DISPLAY
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC
will probably be different, depending upon your particular version of Windows and your particular video
card. However, even if your actual screens look different, the same basic set-up information will apply in
almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1
First, click on “
menu.
2
When the control panel window appears,
click on “
a display dialog-box will appear.
Control Panel
Appearance and Themes
” on the Windows start
” and
3
When the control panel window appears,
click on “
dialog-box will appear.
4
Navigate to the “
The correct size setting (resolution)
- Optimum:
(*LN23R41B: 1280 x 720 pixels)
If a vertical-frequency option exists on your display
settings dialog box, the correct value is “
Otherwise, just click “
*
English-51
Display
” and a display
Settings
1360 x 768 pixels
See “Display Modes” on page 73.
” tab on the display dialog-box.
OK
” and exit the dialog box.
60” or “60 Hz”.
Page 57
PC DISPLAY
How to Auto Adjust
Use the Auto Adjust function to have the TV set automatically adjust the video signals
the monitor receives. The function also automatically fine-tunes the settings and adjusts
the frequency values and positions.
Press the PC button under the remote’s cover to select the PC mode.
1
Press the MENU button
to display the menu.
Press the
buttons to select “Setup”,
then press the ENTER
button.
Press the
buttons to select “PC”, then
press the ENTER button.
UP/DOWN
UP/DOWN
2
Press the UP/DOWN
buttons to select
“Auto Adjustment”, then
press the ENTER
button.
Press the EXIT button to exit.
English-52
Page 58
PC DISPLAY
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by fine tuning alone, then do the frequency adjustments to
the utmost and fine tune again. After the noise has been reduced, re-adjust the picture
so that it is aligned on the center of screen.
Press the PC button under the remote’s cover to select the PC mode.
1
Press the MENU button
to display the menu.
Press the
buttons to select “Setup”,
then press the ENTER
button.
Press the
buttons to select “PC” then
press the ENTER button.
UP/DOWN
UP/DOWN
2
Press the ENTER button
to select “Image Lock”.
3
Press the UP/DOWN
buttons to select “Coarse”
or “Fine”, then press the
ENTER button.
Press the
buttons to adjust the screen
quality. Vertical stripes may
appear or the picture may
be blurry.
Press the
LEFT/RIGHT
EXIT button to exit.
<Adjusting Coarse>
<Adjusting Fine>
English-53
Page 59
PC DISPLAY
Changing the Screen Position
Press the PC button under the remote’s cover to select the PC mode.
1
Press the MENU button
to display the menu.
Press the
buttons to select “Setup”,
then press the ENTER
button.
UP/DOWN
2
Press the UP/DOWN
buttons to select “PC”, then
press the ENTER button.
Press the
buttons to select “Position”,
then press the ENTER
button.
UP/DOWN
3
Press the UP/DOWN
buttons to adjust the
V-Position.
Press the
buttons to adjust the
H-Position.
Press the
to exit.
LEFT/RIGHT
EXIT button
English-54
Page 60
PC DISPLAY
Initializing the Screen Position or Color Settings
Press the PC button under the remote’s cover to select the PC mode.
1
Press the MENU button
to display the menu.
Press the
buttons to select “Setup”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select “PC”, then
press the ENTER button.
UP/DOWN
2
Press the UP/DOWN
buttons to select
“Image Reset”, then press
the ENTER button.
Press the
EXIT button to exit.
English-55
Page 61
Chapter 8
TIME SETTING
Setting the Clock
Setting the clock is necessary in order to use the various timer features of the TV.
Also, you can check the time while watching the TV. (Just press the INFO button).
1
Press the MENU button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
Press the
buttons to select “Time”,
then press the ENTER
button.
UP/DOWN
2
Press the ENTER button
to select “Time”, then press
the ENTER button to
select “Clock Set”.
3
Press the UP/DOWN
buttons repeatedly until the
correct “Hour” appears.
After the hour is entered,
press the LEFT/RIGHT
buttons
to select “Minute”.
Press the
buttons until the correct
“Minute” appears.
Press the
buttons
and adjust with the
UP/DOWN buttons.
Press the
UP/DOWN
LEFT/RIGHT
to select “am/pm”
EXIT button to exit.
You can also set the time
using the number buttons
on the remote.
English-56
Page 62
TIME SETTING
Setting the Sleep Timer
Set the timer for the TV to turn off at the preset time automatically.
Sleep timer
1
Press the MENU button
to display the menu.
Press the
buttons to select “Setup”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select “Time”,
then press the ENTER
button.
UP/DOWN
2
Press the UP/DOWN
buttons to select
“Sleep Timer”, then press
the ENTER button.
3
Press the UP/DOWN
buttons repeatedly until the
correct time appears.
Press the EXIT button to
exit.
Alternate method:
Press the SLEEP button on the remote. The number on the
screen changes from Off • 30 • 60 • 90 • 120 • 150 • 180
English-57
Page 63
TIME SETTING
Setting the On/Off Timer
1
Press the MENU button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
Press the
buttons to select “Time”,
then press the ENTER
button.
UP/DOWN
2
Press the UP/DOWN
buttons to select
“On Timer”, then press the
ENTER button.
Press the UP/DOWN
buttons repeatedly to select
the appropriate “Hour”.
Press the
buttons to select “Minute”.
Press the
buttons repeatedly to select
the appropriate “Minute”.
Set other items using the
same method as above.
LEFT/RIGHT
UP/DOWN
Before using the timer,
you must set the TV’s clock.
When you set the hours,
make sure the correct time
of day (am or pm) appears
to the right of the time.
English-58
You can also set the time
using the number buttons
on the remote.
Page 64
TIME SETTING
3
Press the LEFT/RIGHT
buttons to select “Activation”.
Press the UP/DOWN
buttons to set the On Time
“Yes”.
When finished, press the
ENTER button.
4
To set the Off time, press the
UP/DOWN buttons to
select “Off Timer”.
Press the ENTER button
and set the hours and
minutes.
(Follow the same procedure
as in steps 2 and 3 above).
To deactivate the “On Timer,”
select “No” during this step.
Repeatedly pressing the
UP/DOWN buttons
will alternate between
“Yes” and “No”.
You can also set the time
using the number buttons
on the remote.
5
When finished setting the timer, press the EXIT button to exit.
• Auto Power Off
When you set the timer on, your television will be turned
off if you do not operate any controls for 3 hours after
the TV has been turned on with the ‘Timer On’ function.
English-59
Page 65
Chapter 9
FUNCTION DESCRIPTION
Selecting a Menu Language
1
Press the MENU button
to display the menu.
Press the
buttons to select “Setup”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select “Language”.
Press the ENTER button.
UP/DOWN
3
Press the UP/DOWN
buttons to select “English”,
“Français”, “Español”, or
“Português”.
Press the
to exit.
EXIT button
English-60
Page 66
FUNCTION DESCRIPTION
Viewing Closed Captions
Your TV decodes and displays the closed captions that are broadcast with certain TV shows.
These captions are usually subtitles for the hearing impaired or foreign-language translations.
All VCRs record the closed caption signal from television programs, so home-recorded
video tapes also provide closed captions. Most pre-recorded commercial video tapes provide
closed captions as well. Check for the closed caption symbol in your television schedule and
on the tape’s packaging:
1
Press the MENU button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
.
The Caption feature does not
work with DVD or Set-top box
signals.
2
Press the UP/DOWN
buttons to select “Caption”,
then press the ENTER
button.
Misspellings and unusual
characters sometimes occur during
3
closed caption transmissions, especially
Press the ENTER button
to select “Caption”.
those of live events. There may be a
small delay before captions appear
Press the
when you change channels. These are
buttons to set the Caption
not malfunctions of the TV.
“On”, then press the
ENTER button.
UP/DOWN
4
Depending on the particular broadcast, it might be
necessary to alter the settings to “Channel” and “Field”.
Alternate method:
Press the CAPTION button on the remote control.
Different channels and fields
display different information:
Field 2 carries additional
information that supplements
the information in Field 1.
(For example, Channel 1 may
have subtitles in English,
while Channel 2 has subtitles
in Spanish).
English-61
Page 67
FUNCTION DESCRIPTION
5
Press the UP/DOWN
buttons to select “Mode”,
then press the ENTER
button.
Press the
buttons to set “Caption” or
“Text”, then press the
ENTER button.
UP/DOWN
6
Press the UP/DOWN
buttons to select “Channel”,
then press the ENTER
button.
Press the
buttons to select “1” or “2”,
then press the ENTER
button.
UP/DOWN
7
Press the UP/DOWN
buttons to select “Field”,
then press the
button.
Press the
buttons to select “1” or “2”,
then press the
button.
Press the
exit.
ENTER
UP/DOWN
ENTER
EXIT button to
English-62
Page 68
FUNCTION DESCRIPTION
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen automatically
replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the “Blue Screen”
mode to “Off”.
1
Press the MENU button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select
“Blue Screen”, then press
the ENTER button.
3
Press the UP/DOWN
buttons to set Blue Screen
“On”.
Press the
to exit.
EXIT button
English-63
Page 69
FUNCTION DESCRIPTION
Selecting the Melody
You can hear a melody sound when the television is powered on or off.
1
Press the MENU button
to display the menu.
Press the
buttons to select “Setup”,
then press the ENTER
button.
UP/DOWN
2
Press the UP/DOWN
buttons to select “Melody”,
then press the ENTER
button.
3
Press the UP/DOWN
buttons to select “On”.
Press the
to exit.
EXIT button
English-64
Page 70
Chapter 10
TROUBLESHOOTING
If the TV seems to have a problem, first try this list of possible problems and solutions.
If none of these troubleshooting tips apply, call your nearest Samsung service center.
Identifying Problems
Problem Possible Solution
Poor picture
Poor sound quality.
No picture or sound.
No sound or sound is too
low at maximum
volume.
Picture rolls vertically.
The TV operates
erratically.
Remote control
malfunctions
Try another channel.
Adjust the antenna.
Check all wire connections.
Try another channel.
Adjust the antenna.
Try another channel.
Press the SOURCE button.
Make sure the TV is plugged in.
Check the antenna connections.
First, check the volume of units connected to your TV
(digital broadcasting receiver, DTV, DVD, cable broadcasting
receiver, VCR, etc.). Then, adjust the TV volume accordingly.
Check if “Internal Mute” is off.
Check all wire connections.
Unplug the TV for 30 seconds, then try operating it again.
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
“Check signal cable”
message.
“Not Supported Mode”
message.
The image is too light or
too dark.
Horizontal bars appear to
flicker, jitter or shimmer
on the image.
Ensure that the signal cable is firmly connected to the PC sources.
Check the maximum resolution and the frequency of the Video
Adaptor.
Compare these values with the data in the Display Modes.
Adjust the Brightness and Contrast.
Adjust the Fine tuning.
Adjust the Coarse tuning and then adjust the Fine tuning.
English-65
Page 71
TROUBLESHOOTING
Problem Possible Solution
Vertical bars appear to
flicker,jitter or shimmer
on the image.
Screen is black and
power indicator light
blinks steadily.
Image is not stable and
may appear to vibrate
when you have a
computer connected to
the PC input.
Image is not centered on
the screen.
If a still image is displayed
for an extended period of
time, residual images or
blurring may appear.
Adjust the Coarse tuning and then adjust the Fine tuning.
On your computer check: Power, Signal Cable.
The TV is using its power management system.
Move the computer's mouse or press any key on the keyboard.
If the setting is not correct, use your computer utility program to
change the display settings.
NOTE: Your TV supports multiscan display functions within the
following frequency domain:
Horizontal frequency
(kHz)
Vertical frequency (Hz)
Maximum refresh rate
(at 60Hz)
Adjust the horizontal and vertical position.
The screen position must be adjusted on the output
source (i.e. STB) with a digital signal.
When you need to leave the monitor unused for an extended
period of time, adjust the settings so that the monitor
automatically goes into energy saving mode or activates the
screen saver to display moving images.
1360 x 768 (* LN23R41B: 1280 x 720)
30~61
60~75
The TFT LCD panel uses a panel consisting of sub pixels [3,147,264 (LN23R41B: 2,764,800)] which
require sophisticated technology to produce. However, there may be few bright or dark pixels on the
screen. These pixels will have no impact on the performance of the product.
English-66
Page 72
APPENDIX
Installing the stand
<2> <3>
1. Place the TV faced down on a soft cloth or cushion on a table.
2. Attach the stand to the TV set as shown in the picture.
3. Use the four screws to tightly fix the stand.
Disconnecting the stand
<2> <3> <4>
1. Place the TV faced down on a soft cloth or cushion on a table.
2. Remove four screws from the back of the TV.
3. Separate the stand from the TV.
4. Cover the bottom hole with a cap.
English-67
Page 73
APPENDIX
Installing the Wall Mount Kit
(LN23R41B / LN23R51B / LN26R51B)
Note: This installation is to be used when attaching the wall mount to a concrete wall.
When attaching to other building materials, please contact your nearest dealer.
Components (Sold separately)
M4 X L12 M4 X L20
Wall-Bracket Set-Bracket Screw: 8EA
Wood Screw: 4EA
Anchor: 4EA
How to assemble the Wall Mount Bracket
1 Mark the location on the wall where the hole will be drilled.
Drill a hole of 35mm depth on the marked location.
Fix anchors on each hole on the wall.
Connect wall-bracket to the wall with wood screws after fitting
anchors into the wall-bracket
Note: If the bracket is not firmly fixed to the wall, LCD TV can fall off.
2 Turn the power off and unplug the power cord from the outlet.
Place the TV faced down on a soft cloth or cushion on a table.
Attach the set-bracket onto the rear side of the TV set and secure the screws .
3
Insert three Hangers of the set-bracket into the grooves of the wall-bracket .
Fix set-bracket and wall-bracket with screws .
Note: Before installing the set on the wall, connect the cables to the set first.
.
Installation Guide
English-68
Page 74
APPENDIX
Installing the Wall Mount Kit (LN32R51B)
Note: This installation is to be used when attaching the wall mount to a concrete wall.
When attaching to other building materials, please contact your nearest dealer.
Components (Sold separately)
M6 X L14 M4 X L25 M4 X L8
Wall-Bracket Set-Bracket Screw: 8EA Wood Screw:
7EA
How to assemble the Wall Mount Bracket
1 Mark the location on the wall where the hole will be drilled.
Drill a hole of 35mm depth on the marked location.
Fix anchors on each hole on the wall.
Connect wall-bracket to the wall with wood screws after fitting
anchors into the wall-bracket
Note: If the bracket is not firmly fixed to the wall, LCD TV can fall off.
.
Anchor: 7EA Screw: 3EA Installation
Guide
2 Turn the power off and unplug the power cord from the outlet.
Place the TV faced down on a soft cloth or cushion on a table.
Attach the set-bracket onto the rear side of the TV set and secure the screws .
3 Insert three Hangers of the set-bracket into the grooves of the wall-bracket .
Fix set-bracket and wall-bracket with screws .
Note: Before installing the set on the wall, connect the cables to the set first.
English-69
Page 75
APPENDIX
Using the Anti-Theft Kensington Lock
The Kensington lock is a device used to physically fix the system when using it in
a public place.
The locking device has to be purchased separately. The appearance and locking method may
differ from the illustration depending on the manufacturer. Please refer
to the manual provided with the Kensington lock for proper use.
Cable
Figure 2
Figure 1
<Optional>
Note: The place of the Kensington Lock may be different depending on its model.
1. Insert the locking device into the Kensington slot on the LCD TV (Figure 1),
and turn it in the locking direction (Figure 2).
2. Connect the Kensington lock cable.
3. Fix the Kensington lock to a desk or a heavy stationary object.
Using Your TV in Another Country
If you plan to take your TV with you to a foreign country, please be aware of the
different television systems that are in use around the world. A TV designed for one
system may not work properly with another system due to differences in the TV
channel frequencies.
English-70
Page 76
APPENDIX
Specifications
Model Name
Panel
Size
Display Size
Type
Pixel Pitch
Viewing Angle
Resolution
Frequency
Horizontal
Vertical
Display Color
PC Resolution
Maximum Mode
Optimum Mode
Input Signal
Sync.
Video Signal
TV
Color System
Sound System
LN23R41B
23” Diagonal (16:9)
20.10 (H) x 11.31 (V) inches
(510.72 (H) x 287.28 (V) mm)
a-si TFT active matrix
0.005 (H) x 0.016 (V) inches
(0.1330 (H) x 0.3990 (V) mm)
176/176 (H/V)
1280 (H) x 720 (V)
30 ~ 61 kHz
60 ~ 75 Hz
16,777,216 colors
1280 x 720 @ 60 Hz
1280 x 720 @ 60 Hz
H/V Separate, TTL, P. or N.
0.7 Vp-p @ 75 ohm
NTSC
STEREO
LN23R51B
23” Diagonal (16:9)
20.00 (H) x 11.25 (V) inches
(508.125 (H) x 285.696 (V) mm)
a-si TFT active matrix
0.015 (H) x 0.015 (V) inches
(0.372 (H) x 0.372 (V) mm)
170/170 (H/V)
1366 (H) x 768 (V)
30 ~ 61 kHz
60 ~ 75 Hz
16,777,216 colors
1360 x 768 @ 60 Hz
1360 x 768 @ 60 Hz
H/V Separate, TTL, P. or N.
0.7 Vp-p @ 75 ohm
NTSC
STEREO
22.67 (H) x 12.74 (V) inches
(575.77 (H) x 323.71 (V) mm)
0.017 (H) x 0.017 (V) inches
(0.511 (H) x 0.511 (V) mm)
H/V Separate, TTL, P. or N.
LN26R51B
26” Diagonal (16:9)
a-si TFT active matrix
170/170 (H/V)
1366 (H) x 768 (V)
30 ~ 61 kHz
60 ~ 75 Hz
16,777,216 colors
1360 x 768 @ 60 Hz
1360 x 768 @ 60 Hz
0.7 Vp-p @ 75 ohm
NTSC
STEREO
LN32R51B
32” Diagonal (16:9)
27.47 (H) x 15.44 (V) inches
(697.68 (H) x 392.26 (V) mm)
a-si TFT active matrix
0.020 (H) x 0.020 (V) inches
(0.511 (H) x 0.511 (V) mm)
170/170 (H/V)
1366 (H) x 768 (V)
30 ~ 61 kHz
60 ~ 75 Hz
16,777,216 colors
1360 x 768 @ 60 Hz
1360 x 768 @ 60 Hz
H/V Separate, TTL, P. or N.
0.7 Vp-p @ 75 ohm
NTSC
STEREO
Video
Color System
Video System
Component
Vid eo In
Audio In
Power Supply
Input
Power Consumption
Normal
Power Saving
Dimension
(W x D x H)
Body
With stand
NTSC
CVBS, S-VHS
1.0 Vp-p @ 75 ohm
500 mVrms
AC 110~120 V, 60 Hz
100 W
< 1.5 W
22.95 x 3.54 x 17.44 inches
(583.0 x 90.0 x 443.0 mm)
22.95 x 8.11 x 19.10 inches
(583.0 x 206.0 x 484.7 mm)
NTSC
CVBS, S-VHS
1.0Vp-p @ 75 ohm
500 mVrms
AC 110~240 V, 50/60 Hz
100 W
< 1.5 W
22.95 x 3.54 x 17.44 inches
(583.0 x 90.0 x 443.0 mm)
22.95 x 8.11 x 19.10 inches
(583.0 x 206.0 x 484.7 mm)
English-71
NTSC
CVBS, S-VHS
1.0Vp-p @ 75 ohm
500 mVrms
AC 110~240 V, 50/60 Hz
140 W
< 1.5 W
26.06 x 3.70 x 19.60 inches
(662.0 x 94.0 x 497.8 mm)
26.06 x 8.11 x 21.22 inches
(662.0 x 206.0 x 539.0 mm)
NTSC
CVBS, S-VHS
1.0Vp-p @ 75 ohm
500 mVrms
AC 110~240 V, 50/60 Hz
170 W
< 1.5 W
31.38 x 3.898 x 23.31 inches
(797.0 x 99.0 x 592.0 mm)
31.38 x 9.80 x 25.62 inches
(797.0 x 249.0 x 650.7 mm)
Page 77
APPENDIX
Model Name
Weight
With Stand
Environmental
Considerations
Operating
Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Audio Characteristics
Audio Input
Audio Input (PC)
Headphone Output
Frequency
Response
LN23R41B
18.96 lbs (8.6 kg)
50 °F to 104 °F
(10 °C to 40 °C)
10 % to 80 %,
non-condensing
-4 °F to 113 °F
(-20 °C to 45 °C )
5 % to 95 %,
non-condensing
RCA Jack (L, R),
0.5 Vrms (-9 dB)
3.5 ø Stereo Jack,
0.5 Vrms (-9 dB)
Max. 10 mW Output
(3.5 ø Stereo Jack, 32 Ω)
RF: 80 Hz ~ 15 kHz
(at -3 dB)
AV: 80 Hz ~ 20 kHz
(at -3 dB)
LN23R51B LN26R51B LN32R51B
18.96 lbs (8.6 kg)
50 °F to 104 °F
(10 °C to 40 °C)
10 % to 80 %,
non-condensing
-4 °F to 113 °F
(-20 °C to 45 °C )
5 % to 95 %,
non-condensing
RCA Jack (L, R),
0.5 Vrms (-9 dB)
3.5 ø Stereo Jack,
0.5 Vrms (-9 dB)
Max. 10 mW Output
(3.5 ø Stereo Jack, 32 Ω)
RF: 80 Hz ~ 15 kHz
(at -3 dB)
AV: 80 Hz ~ 20 kHz
(at -3 dB)
33.07 lbs (15.0 kg)
50 °F to 104 °F
(10 °C to 40 °C)
10 % to 80 %,
non-condensing
-4 °F to 113 °F
(-20 °C to 45 °C )
5 % to 95 %,
non-condensing
RCA Jack (L, R),
0.5 Vrms (-9 dB)
3.5 ø Stereo Jack,
0.5 Vrms (-9 dB)
Max. 10 mW Output
(3.5 ø Stereo Jack, 32 Ω)
RF: 80 Hz ~ 15 kHz
(at -3 dB)
AV: 80 Hz ~ 20 kHz
(at -3 dB)
39.02 lbs (17.7 kg)
50 °F to 104 °F
(10 °C to 40 °C)
10 % to 80 %,
non-condensing
-4 °F to 113 °F
(-20 °C to 45 °C )
5 % to 95 %,
non-condensing
RCA Jack (L, R),
0.5 Vrms (-9 dB)
3.5 ø Stereo Jack,
0.5 Vrms (-9 dB)
Max. 10 mW Output
(3.5 ø Stereo Jack, 32 Ω)
RF: 80 Hz ~ 15 kHz
(at -3 dB)
AV: 80 Hz ~ 20 kHz
(at -3 dB)
Referring to Display Modes, page 73.
*
English-72
Page 78
APPENDIX
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted
automatically. If the signal from the system doesn’t equal the standard signal mode,
adjust the mode by referring to your video card user guide; otherwise there may be no
video. For the display modes listed below, the screen image has been optimized during
manufacture.
Horizontal
Mode Resolution
IBM 640 X 480 31.469 59.940 25.175 - / -
720 X 400 31.469 70.087 28.322 - / +
VESA 640 X 480 37.861 72.809 31.500 - / -
640 X 480 37.500 75.000 31.500 - / 800 X 600 37.879 60.317 40.000 + / +
800 X 600 48.077 72.188 50.000 + / +
800 X 600 46.875 75.000 49.500 + / +
1024 X 768 48.364 60.000 65.000 - / 1024 X 768 56.476 70.069 75.000 - / 1024 X 768 60.023 75.029 78.750 + / +
1360 X 768 47.712 60.015 85.800 + / +
VESA 1280 X 720 45.000 60.000 74.250 + / +
(LN23R41B)
The interlace mode is not supported.
*
The set might operate abnormally if a non-standard video format is selected.
*
DVI dose not support PC function.
*
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
Frequency
(MHz)
Sync
Polarity
(H/V)
English-73
Loading...