Samsung LN3B460, LN6B460, LNB460, LN22B460B2D, LN26B460B2D Quick Setup Manual

English-1

1-800-SAMSUNG (7267864)

Samsung Electronics America, Inc.

105 Challenger Road Ridgefield Park, NJ 07660-0511

Samsung Electronics Canada Inc., Customer Service

55 Standish Court Mississauga, Ontario L5R 4B2

Call center hours of operation (Mon-Sun 9AM-12AM EST).

To register this product please visit
www.samsung.com/register.

LN22B460 / LN26B460

Rear Panel (LN22B460)

9

8

0!@

21 3 4 5 6 7

1 EX-LINK
2 DIGITAL AUDIO OUT (OPTICAL)
3 PC IN [PC] / [AUDIO]
4 H (HEADPHONE)

5 HDMI (DVI) IN /

DVI AUDIO IN [R-AUDIO-L]

6 SERVICE
7 ANT IN
8 POWER INPUT

9 KENSINGTON LOCK
0 AV IN
! COMPONENT IN
@ AUDIO OUT

Quick Setup Guide

STOP

Please do not return

this unit

If you are having problems operating

this TV,

Please call;

1-800-SAMSUNG (1-800-726-7864)

For web support please visit

www.samsung.com/support

LN32B460

English-2

Rear Panel (LN26B460, LN32B460)

@

0

1

!

1 52 43

7 86 9

1 HDMI IN 1(DVI), 2, 3 /

DVI AUDIO IN [R-AUDIO-L]

2 PC IN [PC] / [AUDIO]
3 HEADPHONE
4 DIGITAL AUDIO OUT (OPTICAL)

5 SERVICE
6 COMPONENT IN / AV IN 1
7 ANT IN
8 AUDIO OUT

9 EX-LINK
0 KENSINGTON LOCK
! AV IN 2
@ POWER INPUT

Audio Output Performance Comparison

OPTICAL (Digital)

AUDIO (Analog)

Best

Normal

Video Input Performance Comparison

HDMI/DVI

PC/COMPONENT

VIDEO

Best

Better

Normal

/

/

English-3

Remote Control

See “Remote Control” in the owner’s instructions for details.

1

POWER

Turns the TV on and off.

2

NUMERIC BUTTONS

Press to change the channel.

3 _

Press to select additional
channels (digital and analog)
being broadcast by the same
station. For example, to select
channel ‘54-3’, press ‘54’, then
press ‘_’ and ‘3’.

4

MUTE M

Press to temporarily cut off the
sound.

5

- VOL +

Press to increase or decrease
the volume.

6

CH LIST

Used to display Channel Lists
on the screen.

7

TOOLS

Use to quickly select frequently
used functions.

8

INFO

Press to display information on
the TV screen.

9

COLOR BUTTONS

Use these buttons in the
Channel list menus etc.

0

P.SIZE

Picture size selection.

!

TV

Selects the TV mode directly.

@

PRE.CH

Tunes to the previous channel.

# z

Press to change channels.

$

SOURCE

Press to display and select the
available video sources.

%

FAV.CH

Press to switch to your favorite
channels.

^

MENU

Displays the main on-screen
menu.

&

RETURN

Returns to the previous menu.

*

 UP▲/DOWN▼/LEFT◄/

RIGHT►/ENTERE

Use to select on-screen menu
items and change menu values.

(

EXIT

Press to exit the menu.

)

CC

Controls the caption decoder.

a

MTS

Press to choose stereo, mono or
Separate Audio Program (SAP
broadcast).

1

!

@

#

$
%
^
&

*

(

)
a

2

3
4

5

6

7

8

9

0

English-4

Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via DVI

TV Rear Panel

1

DVI to HDMI Cable (Not supplied)

2

Audio Cable (Not supplied)

1

Connect a DVI to HDMI Cable or
DVI-HDMI Adapter between the HDMI
(DVI) IN jack on the TV and the DVI
jack on the DVD / Blu-ray player /
Cable Box / Satellite receiver (Set-Top
Box).

2

Connect Audio Cables between the
DVI AUDIO IN [R-AUDIO-L] jack on
the TV and the DVD / Blu-ray player /
Cable Box / Satellite receiver (Set-Top
Box).

Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via HDMI

1

What is HDMI?

•

HDMI(High-Definition Multimedia
Interface), is an interface that enables the
transmission of digital audio and video

signals using a single cable.

•

The difference between HDMI and DVI
is that the HDMI device is smaller in
size and has the HDCP (High Bandwidth
Digital Copy Protection) coding feature
installed.

Connect an HDMI Cable between
the HDMI (DVI) IN jack on the TV
and the HDMI jack on the DVD
/ Blu-ray Player or Cable Box /
Satellite receiver (Set-Top Box).

DVD / Blu-ray player / Cable Box /

Satellite receiver (Set-Top Box)

Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.

When connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box), match the color of the connection terminal to the cable.

➣

➣

Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.

The TV may not output sound and pictures may be displayed with abnormal color when DVD / Blu-ray player / Cable Box / Satellite receiver
(Set-Top Box) supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect
the HDMI cable to the HDMI (DVI) IN jack and the audio cables to the DVI AUDIO IN [R-AUDIO-L] jacks on the back of the TV. If this happens,
contact the company that provided the DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) to confirm the HDMI version, then
request an upgrade.

HDMI cables that are not 1.3 may cause annoying flicker or no screen display.

➣

➣

➣

DVD / Blu-ray player / Cable Box /

Satellite receiver (Set-Top Box)

TV Rear Panel

HDMI Cable (Not supplied)

1

Connections (LN22B460)

English-5

Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver
(Set-Top Box) via Component cables

TV Rear Panel

1

Component Cable (Not supplied)

DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box)

2

Audio Cable (Not supplied)

1

Connect a Component Cable between
the COMPONENT IN [Y, PB, PR] jacks
on the TV and the COMPONENT [Y,
PB, PR] jacks on the DVD / Blu-ray
player / Cable Box / Satellite receiver
(Set-Top Box).

2

Connect Audio Cables between the
COMPONENT IN [R-AUDIO-L] jacks
on the TV and the AUDIO OUT jacks
on the DVD / Blu-ray player / Cable
Box / Satellite receiver (Set-Top Box).

Component video separates the video into
Y (Luminance (brightness)), Pb (Blue) and
Pr (Red) for enhanced video quality. Be sure
to match the component video and audio
connections. For example, if connecting a
Component video cable to COMPONENT IN,
connect the audio cable to COMPONENT IN
also.

Each DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box) has a different
back panel configuration.

When connecting a DVD / Blu-ray player /
Cable Box / Satellite receiver (Set-Top Box),
match the color of the connection terminal to
the cable.

➣

➣

➣

Connecting a VCR

If you have a ‘mono’ (non-stereo) VCR,
use a Y-connector (not supplied) to
connect to the right and left audio input
jacks of the TV. Alternatively, connect
the cable to the ‘R’ jack. If your VCR is
stereo, you must connect two cables.

Each VCR has a different back
panel configuration.

When connecting a VCR, match
the color of the connection
terminal to the cable.

➣

➣

➣

TV Rear Panel

2

Audio Cable (Not supplied)

VCR Rear Panel

1

Video Cable (Not supplied)

2

Connect Audio Cables between
the AV IN [R-AUDIO-L] jacks
on the TV and the AUDIO OUT
jacks on the VCR.

1

Connect a Video Cable
between the AV IN [VIDEO]
jack on the TV and the VIDEO
OUT jack on the VCR.

English-6

Connecting a Digital Audio System

TV Rear Panel

1

Optical Cable (Not supplied)

Digital Audio System

1

Connect an Optical Cable
between the DIGITAL AUDIO
OUT (OPTICAL) jacks on the
TV and the Digital Audio Input
jacks on the Digital Audio
System.

When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack: Decrease the volume of the TV and
adjust the volume level with the system’s volume control.

5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.

Each Digital Audio System has a different back panel configuration.

When the Home Theater receiver is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying
a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital component
such as a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) and is connected to the TV via HDMI, only 2
channel sound will be heard from the Home Theater receiver. If you want to hear 5.1 channel audio, connect the digital audio
out jack on DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) directly to an Amplifier or Home Theater, not the
TV.

➣

➣

➣

➣

Connecting an Amplifier / DVD Home Theater

TV Rear Panel

1

Audio Cable (Not supplied)

Amplifier/DVD Home Theater

1

Connect Audio Cables between the
AUDIO OUT [R-AUDIO-L] jacks on
the TV and Audio Input jacks on the
Amplifier / DVD Home Theater.

When an audio amplifier is connected
to the AUDIO OUT [R-AUDIO-L]
jacks: Decrease the volume of the TV
and adjust the volume level with the
Amplifier’s volume control.

Each Amplifier/DVD Home Theater has
a different back panel configuration.

When connecting an Amplifier/DVD
Home Theater, match the color of the
connection terminal to the cable.

➣

➣

➣