Связывайтесь с SAMSUNG по всему миру
Если у вас есть предложения или вопросы по продуктам Samsung, связывайтесь с информационным центром Samsung.
Страна |
Центр поддержки покупателей |
Веб-узел |
ESTONIA |
800-7267 |
www.samsung.ee |
LATVIA |
8000-7267 |
www.samsung.com/lv |
LITHUANIA |
8-800-77777 |
www.samsung.lt |
KAZAHSTAN |
8-10-800-500-55-500 |
www.samsung.com/kz_ru |
KYRGYZSTAN |
00-800-500-55-500 |
- |
RUSSIA |
8-800-555-55-55 |
www.samsung.ru |
TADJIKISTAN |
8-10-800-500-55-500 |
- |
UKRAINE |
8-800-502-0000 |
www.samsung.ua |
UZBEKISTAN |
8-10-800-500-55-500 |
www.samsung.com/kz_ru |
LE40A856S
LE46A856S
LE52A856S
ЖК-ТЕЛЕВИЗОР
руководство пользователя
удивительные возможности
Благодарим за приобретение продукции компании Samsung. Для получения полного обслуживания зарегистрируйте свое устройство по адресу
www.samsung.com/global/register
Модель |
|
Серийный номер |
BN68-01701F-01
Digital TV (DVB-T) Notice
1.FUNCTIONALITIES RELATED TO DIGITAL TV (DVB) ARE ONLY AVAILABLE IN COUNTRIES OR AREAS WHERE DVB-T (MPEG2 AND MPEG4 AVC) DIGITAL TERRESTRIAL SIGNALS ARE BROADCAST. DVB-T is the European consortium standard for the broadcast transmission of digital terrestrial television. Please check with your local dealer about the availability of DVB-T service in your area.
2.Although this TV set meets the current DVB-T standards as of [August, 2008], compatibility with future DVB-T digital terrestrial broadcast cannot be guaranteed.
3.Some Digital TV functions may not be available or operate correctly in some countries or regions.
4.For more information, please contact your local SAMSUNG customer care centre.
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. (See back cover for more information.)
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen
Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial afterimages. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
Contents |
|
Connecting and Preparing Your TV |
|
■ List of Parts.......................................................................... |
2 |
■ Installing the Wall Mount Kit................................................. |
2 |
■ Viewing the Control Panel.................................................... |
3 |
■ Viewing the Connection Panel............................................. |
4 |
■ Remote Control.................................................................... |
6 |
■ Mini Remote Control............................................................ |
7 |
■ Installing Batteries in the Remote Control............................ |
7 |
■ Switching On and Off........................................................... |
8 |
■ Placing Your Television in Standby Mode............................ |
8 |
■ Viewing the Menus............................................................... |
8 |
■ Using the TOOLS Button..................................................... |
9 |
■ Using the Wheel button........................................................ |
9 |
■ Plug & Play Feature........................................................... |
10 |
Channel Control |
|
■ Storing Channels and channel .......................................... |
10 |
■ Managing Channels........................................................... |
13 |
Picture Control |
|
■ Changing and Resetting the Picture Settings.................... |
14 |
■ Viewing Picture-in-Picture.................................................. |
17 |
■ PC Display......................................................................... |
18 |
■ Setting up the TV with your PC.......................................... |
19 |
Sound Control |
|
■ Changing the Sound Standard........................................... |
19 |
■ Selecting the Sound Mode................................................. |
21 |
Function Description |
|
■ Configuring the Setup Menu.............................................. |
21 |
■ Setting the Time................................................................. |
25 |
■ Network Connection........................................................... |
26 |
■ Network Setup................................................................... |
28 |
■ Source List / Edit Name..................................................... |
29 |
■ Product Guide.................................................................... |
30 |
WISELINK Pro |
|
■ Connecting a USB Device................................................. |
30 |
■ Using the WISELINK Pro Function.................................... |
31 |
■ Using and Sorting Photo List............................................. |
33 |
■ Viewing a Photo or Slide Show ......................................... |
34 |
■ Using and Sorting the Music List....................................... |
36 |
■ Playing a Music ................................................................. |
37 |
■ Using and Sorting the Movie List....................................... |
38 |
■ Playing a Movie File .......................................................... |
39 |
■ Deleting the Photo/Music/Movie File ................................. |
40 |
■ Picture/Music Settings Using WISELINK Pro.................... |
41 |
■ Using the Setup Menu....................................................... |
41 |
WISELINK Pro-DLNA |
|
■ Setting the DLNA Network................................................. |
42 |
■ Installing the DLNA Application.......................................... |
42 |
■ Using the DLNA Application............................................... |
44 |
■ Using the DLNA Function................................................... |
47 |
Content Library |
|
■ Activating the Content Library............................................ |
48 |
■ Using the Content Library.................................................. |
49 |
■ Using Additional Content Using External USB Memory |
|
Storage.............................................................................. |
50 |
About Anynet+ |
|
■ Connecting Anynet+ Devices............................................. |
51 |
■ Setting Up Anynet+ ........................................................... |
52 |
■ Scanning and Switching between Anynet+ Devices.......... |
52 |
■ Recording........................................................................... |
53 |
■ Listening through a Receiver (Home theater).................... |
54 |
■ Troubleshooting for Anynet+ ............................................. |
54 |
InfoLive |
|
■ Using InfoLive.................................................................... |
55 |
■ Using the Weather Service................................................ |
56 |
■ Using the News Service..................................................... |
56 |
■ Using the Stock Service..................................................... |
57 |
■ InfoLive Setup.................................................................... |
58 |
Recommendations for Use |
|
■ Teletext Feature................................................................. |
59 |
■ Setting Up Your Remote Control........................................ |
60 |
■ Remote Control Codes...................................................... |
61 |
■ Auto Wall-Mount Adjustment (Sold separately) |
|
(depending on the model).................................................. |
63 |
■ Using the Anti-Theft Kensington Lock |
|
(depending on the model).................................................. |
64 |
■ Securing the TV to the Wall............................................... |
64 |
■ Troubleshooting: Before Contacting Service Personnel.... |
65 |
■ Specifications..................................................................... |
66 |
|
|
N |
O |
T |
Symbol |
Press |
Note |
One-Touch Button |
TOOL Button |
English
English -
Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
Remote Control & |
Mini Remote Control |
Power Cord |
Cover-Bottom |
Program CD |
Cleaning Cloth |
Batteries |
& Lithium battery (3V) |
||||
(AAA x 2) |
|
|
|
|
|
|
|
|
|
|
|
• Owner’s Instructions |
• Warranty card |
• Safety Guide |
|
||
|
|
|
|
|
|
N Warranty card / Safety Guide (Not available in all locations)
Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.
N Remove the stand and cover the bottom hole with a cap and fasten with two screws.
English -
8 6 7
Front Panel buttons
Touch each button to operate.
1 |
2 |
3 |
4 |
5 |
N The product colour and shape may vary depending on the model.
1SOURCE E
Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTEREbutton on the remote control.
2MENU
Press to see an on-screen menu of your TV’s features.
4>C/P.P<
Press to change channels. In the on-screen menu, use the >C/P.P<buttons as you would use the ▼ and ▲ buttons on the remote control.
5PPOWER
Press to turn the TV on and off.
3 – = + |
6 POWER INDICATOR |
Press to increase or decrease the volume.
In the on-screen menu, use the – = + buttons as you would use the ◄ and ► buttons on the remote control.
Blinks and turns off when the power is on and lights up in stand-by mode.
7REMOTE CONTROL SENSOR
Aim the remote control towards this spot on the TV.
8 SPEAKERS
English -
Viewing the Connection Panel |
|
|
|
|
||
|
|
|
|
|
|
[TV Side Panel] |
|
[TV Rear Panel] |
|
|
|
|
|
|
|
1 |
2 |
3 |
4 |
5 |
|
|
|
|
|
|
6 |
|
|
|
|
|
|
3 |
|
|
|
|
|
|
7 |
|
|
|
|
|
|
8 |
$ |
# |
@ |
! |
0 |
|
|
|
|
|
|
|
|
9 |
|
Power Input |
|
|
|
|
|
N The product colour and shape may vary depending on the model.
N Whenever you connect an external device to your TV, make sure that power on the unit is turned off. N When connecting an external device, match the colour of the connection terminal to the cable.
1PC IN [PC] / [AUDIO]
-Connect to the video and audio output jack on your PC.
2COMPONENT IN
-Connect component video cables (optional) to component connector (‘PR’, ‘PB’, ‘Y’) on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD.
-If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector (‘PR’, ‘PB’, ‘Y’) on your set.
-The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
-Connect RCA audio cables (optional) to [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD.
3HDMI IN 1, HDMI IN 2, HDMI IN 3, HDMI IN 4
-Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)
-No additional Audio connection is needed for an HDMI to HDMI connection.
-When using an HDMI / DVI cable connection, you must use the HDMI IN 2 jack.
NWhat is HDMI?
-‘High Definition Multimedia interface’ allows the transmission of high definition digital video data and multiple channels of digital audio.
-The HDMI / DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).
The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.
NThe TV may not output sound and pictures may be displayed with abnormal colour when DVD players / Cable Boxes / Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO- L] jacks on the back of the TV. If this happens, contact the company that provided the DVD player / Cable Box / Satellite receiver to confirm the HDMI version, then request a firmware update. HDMI cables that are not 1.3 may cause annoying flicker or no screen display.
DVI IN(HDMI2) [R-AUDIO-L]
- DVI audio outputs for external devices.
English -
N Supported modes for HDMI / DVI and Component.
|
480i |
480p |
576i |
576p |
720p |
1080i |
1080p |
HDMI / DVI 50Hz |
X |
X |
X |
O |
O |
O |
O |
HDMI / DVI 60Hz |
X |
O |
X |
X |
O |
O |
O |
Component |
O |
O |
O |
O |
O |
O |
O |
4ANT IN
-To view television channels correctly, a signal must be received by the set from one of the following sources: An outdoor aerial / A cable television network / A satellite network
5S-VIDEO IN
-Connect S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
-Connect the audio cables to AV IN [R-AUDIO-L].
6COMMON INTERFACE SLOT
-When not inserting ‘CI CARD’ in some channels, ‘Scrambled Signal’ is displayed on the screen.
-The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.
-When the channel information configuration has finished, the message ‘Updating Completed’ is displayed, indicating that the channel list is now updated.
NYou must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD may cause damage to it.
N Insert the CI-Card in the direction marked on it.
N The place of the COMMON INTERFACE Slot may be different depending on its model.
7WISELINK
-Connect a USB mass storage device to view movies and photos and listen to music files.
-You can connect to Samsung’s network wirelessly using the ‘Samsung Wireless LAN Adapter’ (Sold separately).
8AV IN
-Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio out connectors on the A/V device.
9HEADPHONES JACK
-Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from the built-in speakers will be disabled.
N Using the sound function is restricted when connecting headphones to the TV.
N Prolonged use of headphones at a high volume may damage your hearing.
N You will not hear sound from the speakers when you connect headphones to the TV.
N The headphone volume and TV volume are adjusted separately.
0DIGITAL AUDIO OUT (OPTICAL)
- Connect to a Digital Audio Component.
NWhen the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the TV outputs 2 channel audio only. If you want to hear 5.1 channel audio, connect the Optical jack on the DVD player or Cable / Satellite Box directly to an Amplifier or Home Theater, not the TV.
!EXT 1, EXT 2
Connector |
|
Input |
|
Output |
|
Video |
Audio (L / R) |
RGB |
Video + Audio (L / R) |
||
|
|||||
EXT 1 |
O |
O |
O |
Only TV or DTV output is available. |
|
EXT 2 |
O |
O |
|
Output you can choose. |
-Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
@LAN
-Connect a LAN cable to this port to connect to the Network.
#SERVICE
-Connector for Service only.
-Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing angle using your remote control.
$ KENSINGTON LOCK (depending on the model)
-The Kensington Lock (optional) is a device used to physically fix the system when used in a public place.
-If you want to use a locking device, contact the dealer where you purchased the TV.
-The location of the Kensington Lock may be different depending on its model.
English -
You can use the remote control up to a distance of about 23 feet from the TV. N The performance of the remote control may be affected by bright light.
1POWER
Television Standby button.
2TV
Selects the TV mode directly.
3NUMERIC BUTTONS
Number buttons for direct channel access
4−
One or more digit channel selection
5VOLUME BUTTONS
+ : Volume increase
– : Volume decrease
6SOURCE
Available source selection
7GUIDE
Electronic Programme Guide (EPG) display
8TOOLS
Use to quickly select frequently used functions.
9INFO
Use to see information on the current broadcast
0COLOURS BUTTONS
Use these buttons in the Channel list and WISELINK Pro, etc.
@E.MODE
Press to select the optional display and sound modes for sports, cinema and games.
#Use these buttons in the DMA, WISELINK Pro and Anynet+. (∏: This remote can be used to control
recording on Samsung recorders with the Anynet+ feature)
$ SET
Sets the remote to control your TV, VCR, DVD, Cable Box or Set-Top Box.
%MODE
Press to operate your TV, DVD, STB or VCR (See pages 60)
^Pressing the ON/OFF @light button toggles between on and off. When the remote control is on, and a key is pressed on the remote control, the remote control buttons will be lit for a moment.
&PRE-CH
Previous channel
*MUTE
Temporary sound switch-off
( CHANNEL BUTTONS P <: Next channel
P >: Previous channel
) MENU
Displays the main on-screen menu
aW.LINK
This function enables you to view and play photo and music files from an external device.
bRETURN
Returns to the previous menu
cUP▲ / DOWN▼ / LEFT◄ / RIGHT► / ENTERE
Press the Up / Down / Left / Right sections of the wheel button and Enter to select on-screen menu items and change menu values. You can navigate up and down the menu, switch channels and adjust the volume by turning the wheel button.
dEXIT
Exit the on-screen menu
eDMA
Use this when connecting a SAMSUNG DMA (Digital Media Adapter) device through an HDMI interface and switching to DMA mode. (The DMA button is optional.) For more information on the operating procedures, refer to the user manual
of the DMA. This button is available when “Anynet+(HDMI-CEC)” is “On” (see page 52)
fINFO.L
Press to use the News, Stock Market and Weather Forecast information services available over the network.
gSUBT.
Digital subtitle display
hCONTENT
This function enables you to view “Content Library”. (see page 48)
iRESET
When your remote does not work, change the batteries and press the RESET button for 2-3 seconds before use.
Teletext Functions
2 :: Exit from the teletext display
60: Teletext mode selection (LIST / FLOF)
78: Teletext store
84: Teletext size selection
95: Teletext reveal
0 Fastext topic selection
!/: Alternately select Teletext, Double, or Mix.
% 1: Teletext sub page
&2: Teletext next page
3: Teletext previous page
* 6: Teletext index |
|
|
||
) |
9: Teletext hold |
|
|
|
b |
7: Teletext cancel |
|
|
|
|
TV |
VCR |
DVD |
STB |
|
SET |
|
RESET |
|
English -
The Mini Remote Control is a simplified remote control that consists of the power, channel and volume buttons only.
1Television Standby button
N This button only works when you press it for longer than 1.5 seconds.
2< : Next channel
> : Previous channel
3+ : Volume increase
– : Volume decrease
4IrDA transmitter
N Use the Mini Remote Control so that this part faces the TV.
1
2
33
2
4
Normal Remote Control
1.Lift the cover at the back of the remote control upward as shown in the figure.
2.Install two AAA size batteries.
N Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside the compartment.
3.Replace the cover.
N Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time.
N Using the remote control with the ON / OFF @light button set to on will reduce the battery usage time.
Mini Remote Control
1.Turn the battery cover counterclockwise to unlock it and then separate the battery cover.
2.Insert the corresponding 3V Lithium battery.
3.Place the battery cover into the remote control aligning it with the grooves and then turn the battery cover clockwise to lock the cover.
NIf the remote control doesn’t work, check the following:
1.Is the TV power on?
2.Are the plus and minus ends of the batteries reversed?
3.Are the batteries drained?
4.Is there a power outage or is the power cord unplugged?
5.Is there a special fluorescent light or neon sign nearby?
English -
The mains lead is attached to the rear of your set.
1.Plug the mains lead into an appropriate socket. N The standby indicator lights up on your set.
2.Press the Pbutton on your set.
N You also can press the POWERPbutton or the TV button on the remote control to turn the TV on.
N The programme that you were watching last is reselected automatically.
3.Press the numeric button (0~9) or channel up / down (</ >) button on the remote control or >C/P.P<button on your set.
N When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.
4.To switch your set off, press the POWERPbutton again.
Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1.Press the POWERPbutton on the remote control.
N The screen is turned off and a red standby indicator appears on your set.
2.To switch your set back on, simply press the POWERP, numeric buttons (0~9), TV button or channel up / down (</ >) button again.
N Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial.
1.With the power on, press the MENU button. The main menu appears on the screen. The menu’s left side has icons: Picture, Sound, Channel, Setup, Input, Application.
2.Press the ▲ or ▼ button to select one of the icons. Then press the ENTERE button to access the icon’s sub-menu.
3.Press the EXIT button to exit.
N The on-screen menus disappear from the screen after about one minute.
Picture
Mode |
:Standard |
Backlight |
: 7 |
Contrast |
: 95 |
Brightness |
: 45 |
Sharpness |
: 50 |
Colour |
: 50 |
Tint (G / R) |
: G50 / R50 |
Detailed Settings |
|
English -
You can use the TOOLS button to select your frequently used functions quickly and easily. The “Tools” menu changes depending on which external input mode you are viewing.
1.Press the TOOLS button. The “Tools” menu will appear.
2.Press the ▲ or ▼ button to select a menu.
3.Press the ▲ / ▼ / ◄ / ► / ENTEREbuttons to display, change, or use the selected items. For a more detailed description of each function, refer to the corresponding page.
•Anynet+ (HDMI-CEC): see page 52
•Picture Size: see page 16
•Picture Mode: see page 14
•Sound Mode: see page 19
•Sleep Timer: see page 25
•SRS TS XT: see page 19
•Energy Saving: see page 23
•Dual l ll: see page 21
•PIP: see page 17
•Auto Adjustment: see page 19
To increase the channel number, turn the wheel clockwise when the Channel Display is displayed. To decrease the channel number, turn the wheel counterclockwise.
To turn the volume up, turn the wheel clockwise when the Volume Control window is displayed. To turn the volume down, turn the wheel counterclockwise.
To move to a lower menu, turn the wheel clockwise when the menu Display is displayed. To move to a higher menu, turn the wheel counterclockwise.
Tools
Anynet+ (HDMI-CEC)
Picture Size |
: |
Auto Wide |
Picture Mode |
: |
Standard |
Sound Mode |
: |
Custom |
Sleep Timer |
: |
Off |
SRS TS XT |
: |
Off |
Energy Saving |
: |
Off |
Dual l ll |
: |
Mono |
U Move |
|
E Enter e Exit |
English -
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1.Press the POWER button on the remote control. The message “Будут установлены параметры “Язык меню”, “Демонстрация”, “Каналы” и “Время”.” is displayed.
2.Press the ENTERE button, then “Выбор языка экранного меню.” menu is automatically displayed. Press the ENTERE button.
3.Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTERE button to confirm your choice.
Plug & Play
Будутустановленыпараметры“Языкменю”, “Демонстрация”,“Каналы”и“Время”.
OK
E Вход
4.Press the ◄ or ► button to select “Store Demo” or “Home Use”, then the ENTERE button.
N We recommend setting the TV to “Home Use” mode for the best picture in your home environment. N “Store Demo” mode is only intended for use in retail environments.
N If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use” (Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
5.Press the ENTEREbutton. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTEREbutton to confirm your choice.
6.Press the ▲ or ▼ button to select the channel source to memorize. Press the ENTERE button to select “Start”.
N Digital & Analogue: Digital and Analogue channels. Digital: Digital channels.
Analogue: Analogue channels.
N The channel search will start and end automatically.
N Press the ENTERE button at any time to interrupt the memorization process.
N After all the available channels are stored, the message “Set the Clock Mode.” is displayed.
7.Press the ENTEREbutton. Press the ▲ or ▼ button to select “Auto”, then Press the ENTEREbutton.
N If you select “Manual”, “Set current date and time” is displayed. (See page 25)
N If you have received a digital signal, the time will be set automatically. If not, see page 25 to set the clock.
8.The message “Enjoy your viewing” is displayed. When you have finished, press the ENTERE button.
If you want to reset this feature...
1.Press the MENU button to display the menu. Press the ▲ or ▼ button to select
“Setup”, then press the ENTERE button.
2.Press the ENTERE button again to select “Plug & Play”.
3.Enter your 4 digit PIN number. The default PIN number of a new TV set is ‘0-0- 0-0’.
N If you want to change PIN number, refer to page 21.
N The “Plug & Play” feature is only available in the TV mode.
Setup
Plug & Play |
► |
Language |
: English |
Time |
|
Network Selection |
: Cable |
Wireless Network Setup |
|
Cable Network Setup |
|
Child Lock |
: On |
Change PIN |
|
Country
Analogue Channel: You can change the country for analogue channels.
Digital Channel: You can change the country for digital channels.
N The PIN number input screen appears. Enter your 4 digit PIN number.
Channel
Country |
► |
Auto Store |
|
Manual Store |
|
Full Guide |
|
Mini Guide |
|
Default Guide |
: Mini Guide |
Channel List |
|
Channel Mode |
: Added Ch. |
English - 10
Auto Store
You can scan for the frequency ranges available to you (and availability |
|
||
depends on your country). Automatically allocated programme numbers may |
Channel |
||
not correspond to actual or desired programme numbers. |
|||
• Digital & Analogue: Digital and Analogue channels. |
|||
|
|||
• |
Digital: Digital channels. |
|
|
• |
Analogue: Analogue channels. |
|
NScans for all channels with active broadcast stations and stores them in the TV’s memory.
N If you want to stop Auto Store, press the ENTERE button.
N The “Stop Auto Store?” message will be displayed.
NSelect “Yes” by pressing the ◄ or ► button, then press the ENTERE button.
N If a channel is locked using the “Child Lock” function, the PIN input window appears.
Fine Tune
Signal Information
LNA |
: On |
► |
Manual Store
N Scans for a channel manually and stores it in the TV’s memory.
NIf a channel is locked using the “Child Lock” function, the PIN input window appears.
Digital Channel
Manual store for digital channels.
• Channel: Set the Channel number using the ▲, ▼ or number (0~9) buttons.
• Frequency: Set the frequency using the number buttons.
• Bandwidth: Set the bandwidth using the ▲, ▼ or number (0~9) buttons.
NWhen it has finished, channels are updated in the channel list.
Analogue Channel
Manual store for analogue channel.
• Programme (Programme number to be assigned to a channel): Sets the programme number using the ▲, ▼ or number
(0~9) buttons.
• Colour System →Auto / PAL / SECAM / NTSC4.43: Sets the colour system value using the ▲ or ▼ button.
• Sound System → BG / DK / I / L: Sets the sound system value using the ▲ or ▼ button.
• Channel (When you know the number of the channel to be stored): Press the ▲ or ▼ button to select “C” (Air channel) or “S” (Cable channel). Press the ► button, then press the ▲, ▼ or number (0~9) buttons to select the required number.
NYou can also select the channel number directly by pressing the number (0~9) buttons.
NIf there is abnormal sound or no sound, reselect the sound standard required.
•Search (When you do not know the channel numbers): Press the ▲ or ▼ button to start the search. The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen.
•Store (When you store the channel and associated programme number): Set to “OK” by pressing the ENTERE button.
NChannel mode
-P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode.
-C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode.
-S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.
Full Guide / Mini Guide
The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information becomes available.
NFor the detailed procedures on using “Full Guide” and “Mini Guide”, refer to the descriptions on page 12.
OYou can also display the guide menu simply by pressing the GUIDE button. (To configure the “Default Guide”, refer to the descriptions.)
Full Guide: Displays the programme information as time ordered One hour segments. Two hours of programme information is displayed which may be scrolled forwards or backwards in time.
Mini Guide: The information of each programme is displayed by each line on the current channel Mini Guide screen from the current programme onwards according to the programme starting time order.
English - 11
Default Guide
Mini Guide / Full Guide: You can decide whether to display either the “Mini Guide” or the “Full Guide” when the GUIDE button on the remote control is pressed.
Channel List
For the detailed procedures on using the “Channel List”, refer to the descriptions on pages 13~14.
Channel Mode
When press the P >/<button, Channels will be switched within the selected channel list.
Added Ch: Channels will be switched within the memorized channel list.
Favourite Ch.: Channels will be switched within the favourite channel list.
Fine Tune
If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually.
NFine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner.
N To reset the fine-tuning, select “Reset” by pressing the ▲ or ▼ button and then press the ENTERE button.
N Only Analogue TV channels can be fine tuned.
Signal Information
You can get information about the signal status.
N If the signal status is poor, the “Weak or No Signal” message is displayed.
N While viewing a Digital channel, this function can be selected.
LNA → On / Off
If the TV is operating in a weak-signal area, the LNA (Low Noise Amplifier) function can improve the reception (a low-noise preamplifier boosts the incoming signal).
N While viewing an Analogue channel, this function can be selected.
Using the Full / Mini Guide
Full Guide |
|
|
|
|
Mini Guide |
|
DTV Cable 900 f tn |
|
|
||
|
|
DTV Cable 900 f tn |
2:10 Tue 1 Jun |
|
2:00 |
|
Freshmen On Campus |
|
|
||
|
|
Freshmen On Campus |
|
|
2:30 |
|
Street Hypnosis |
|
|
||
|
|
|
|
▼ 5:00 |
|
Booze Britain |
|
|
|||
|
|
2:00 - 2:30 |
|
|
|
Watch |
Information |
Full Guide |
Next Page |
Exit |
|
|
|
No Detailed Information |
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
||
|
Today |
|
|
|
|
|
|
|
|
|
|
|
2:00 - 3:00 |
3:00 - 4:00 |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
900 |
f tn |
Freshmen O.. |
Street Hypn.. |
No Information |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
901 |
ITV Play |
|
|
|
|
|
|
|
|
||
Mint Extra |
|
|
|
|
|
|
|
|
|||
902 |
Kerrang! |
Loaded |
No Information |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
903 |
Kiss |
|
|
|
|
|
|
|
|||
Fresh 40 with Dynamite MC |
Kisstory |
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
903 |
oneword |
|
|
|
|
|
|
|
|||
The Distillery |
No Information |
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
▼ 903 |
Smash Hits! |
|
|
|
|
|
|
|
|
||
Smash Hits! Sunday |
|
|
|
|
|
|
|
|
Watch |
Information |
Mini Guide |
+24 Hours |
Exit |
To... |
Then... |
Watch a programme in the EPG list |
Select a programme by pressing the ▲, ▼, ◄, ► button. |
Exit the guide |
Press the blue button |
If the next programme is selected, it is scheduled with the clock icon displayed. If the ENTERE button is pressed again, press the ◄, ► button to select Cancel Schedules, the scheduling is canceled with the clock icon gone.
View programme information |
Select a programme of your choice by pressing the ▲, ▼, ◄, ► button. |
|
Then press the INFO button when the programme of your choice is highlighted. |
|
The programme title is on the upper part of the screen center. |
Please click on INFO button for the detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality Information (HD / SD), Sound Modes, Subtitle or Teletext, languages of Subtitle or Teletext and brief summary of the highlighted programme are included on the detailed information. “...” will be appeared if the summary is long.
Toggle between the “Mini Guide” or “Full Guide” |
Press the red button repeatedly. |
In Full Guide |
Press the green button repeatedly. |
Scrolls backwards quickly (24 hours). |
|
Scrolls forwards quickly (24 hours). |
Press the yellow button repeatedly. |
In Mini Guide |
Press the green button. |
Display next page quickly. |
|
Display previous page quickly. |
Press the yellow button. |
English - 12
Using this menu, you can Add / Delete or set Favourite channels and use the programme guide for digital broadcasts.
NSelect a channel in the “All Channels”, “Added Channels” or “Favourite” screen by pressing the ▲ / ▼ buttons, and pressing the ENTEREbutton. Then you can watch the selected channel.
All Channels: Shows all currently available channels.
Added Channels: Shows all added channels.
Favourites: Shows all favourite channels.
Programmed: Shows all current reserved programmes.
NUsing the Colour buttons with the Channel List
-Red (Channel Type): Toggle between your “TV”, “Radio”, “Data / Other” and “All”.
-Green (Zoom): Enlarges or shrinks a channel number.
-Yellow (Select): Selects multiple channel lists.
-TOOLS (Option): Displays the “Delete” (or “Add”), “Add to Favourite” (or “Delete from Favourite”), “Lock” (or “Unlock”), “Timer Viewing”, “Edit Channel Name”, “Sort”, “Edit Channel Number”, “Select All”, “Deselect All” or “Auto Store” menu. (The Options menus may differ depending on the situation.)
Channel
Channels Added
All
Mini Guide |
|
Default Guide |
: Mini Guide |
Channel List |
|
Channel Mode |
: Added Ch. |
Fine Tune |
|
Signal Information |
|
LNA |
: On |
824UKTV Gold
825UKTV style
|
|
1 |
C -- |
|
|
|
A |
|
|
||
|
|
2 |
C -- |
|
|
|
A |
|
|
||
|
|
3 |
♥ C -- |
|
|
|
A |
|
|
||
|
|
4 |
C -- |
|
|
|
A |
|
|
||
|
|
5 |
C -- |
|
|
|
A |
|
|
||
|
|
6 |
C -- |
|
|
|
A |
|
|
||
|
|
7 |
C -- |
|
|
|
A |
|
|
||
|
|
8 |
C -- |
|
|
|
A |
|
|
||
Channel Type |
Zoom |
Select |
Option |
N Channel Status Display Icons
A |
An analogue channel. |
|
c |
A channel selected by pressing the yellow button. |
♥ |
A channel set as a Favourite. |
|
( |
A programme currently being broadcast. |
\ |
A locked channel. |
|
) |
A reserved programme |
Channel List Option Menu (in All Channels / Added Channels / Favourites)
N Press the TOOLS button to use the option menu. |
|
824 |
UKTV Gold |
|
||||
N Option menu items may differ depending on the channel status. |
All |
825 |
UKTV style |
|
||||
Add / Delete |
Channels |
|
|
1 |
C -- |
Add to Favourite |
||
|
|
|
Delete |
|
||||
|
|
|
A |
|
|
|
|
|
You can delete or add a channel to display the channels you want. |
|
|
|
2 |
C -- |
|
|
|
|
|
|
A |
|
|
|
|
|
|
|
|
|
3 |
C -- |
Lock |
|
|
N All deleted channels will be shown on “All Channels” menu. |
|
|
A |
|
||||
|
|
|
4 |
C -- |
Timer Viewing |
|||
|
|
A |
||||||
N A gray-coloured channel indicates the channel has been deleted. |
|
|
|
5 |
C -- |
Edit Channel Name |
||
|
|
A |
||||||
N The “Add” menu only appears for deleted channels. |
|
|
|
6 |
C -- |
Sort |
|
|
|
|
A |
▼ |
|||||
|
|
|
7 |
C -- |
|
|||
N You can also delete a channel to the “Added Channels” or “Favourite” menu |
|
|
A |
|
|
|||
|
|
|
8 |
C -- |
|
|
||
in the same manner. |
|
|
A |
|
|
|||
All |
Channel Type |
Zoom |
Select |
Option |
||||
|
Add to Favourite / Delete from Favourite
You can set channels you watch frequently as favourites.
N The “♥” symbol will be displayed and the channel will be set as a favourite.
N All favourite channels will be shown on “Favourite” menu.
Lock / Unlock
You can lock a channel so that the channel cannot be selected and viewed. This function is available only when the “Child Lock” is set to “on”. (see page 21)
N The PIN number input screen appears. Enter your 4 digit PIN number.
N The default PIN number of a new TV set is “0-0-0-0”. You can change the PIN, by selecting “Change PIN” from the menu.
N The “\” symbol will be displayed and the channel will be locked.
Timer Viewing
If you reserve a programme you want to watch, the channel is automatically switched to the reserved channel in the Channel
List; even when you are watching another channel. To reserve a programme , set the current time first. (See page 25.)
N Only memorized channels can be reserved.
N You can set the channel, day, month, year, hour and minute directly by pressing the number buttons on the remote control.
N Reserving a programme will be shown on “Programmed” menu.
N Digital Programme Guide and Viewing Reservation
When a digital channel is selected, and you press the ► button, the Programme Guide for the channel appears. You can reserve a programme according to the procedures described above.
English - 13
Edit Channel Name (only analogue channel)
Channels can labeled so that their call letters appear whenever the channel is selected.
N The names of digital broadcasting channels are automatically assigned and cannot be labeled.
Edit Channel Number (only digital channel)
You can also edit the channel number by pressing the number buttons on the remote control.
Sort (only analogue channel)
This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store.
Select All / Deselect All
•Select All: You can select all the channels in the channel list.
•Deselect All: You can deselect all the selected channels by pressing the yellow button.
NYou can perform the add / delete, add to Favourites / delete from Favourites, or lock / unlock function for multiple channels at the same time. Select the required channels and press the yellow button to set all the selected channels at the same time.
N The cmark appears to the left of the selected channels.
NYou can only select “Deselect All” when there is a selected channel.
Auto Store
NFor further details on setting up options, refer to page 11.
N If a channel is locked using the “Child Lock” function, the PIN input window appears.
Channel List Option Menu (in Programmed )
You can view, modify or delete a reservation.
N Press the TOOLS button to use the option menu.
Change Info: Select to change a viewing reservation.
Cancel Schedules: Select to cancel a viewing reservation.
Information: Select to view a viewing reservation. (You can also change the reservation information.)
Select All: Select all reserved programmes.
Programmed |
1 / 1 / 2008 |
|
|
|
|
|
|
||
|
13:59 |
5 |
TV1 |
Change Info |
|
18:59 |
2 |
TV3 |
Cancel Schedules |
|
Information |
|||
|
20:59 |
2 |
TV3 |
|
|
Select All |
|||
|
21:59 |
2 |
TV3 |
|
|
|
|||
|
All Channel Type Zoom |
Select |
Option Information |
Mode
You can select the type of picture which best corresponds to your viewing requirements.
Dynamic: Selects the picture for high-definition in a bright room.
Standard: Selects the picture for the optimum display in a normal environment.
Movie: Selects the picture for viewing movies in a dark room.
TPress the TOOLS button to display “Tools” menu. You can also set the picture mode by selecting “Tools → Picture Mode”.
Backlight / Contrast / Brightness / Sharpness / Colour / Tint(G/ R)
Your television has several setting options that allow you to control the picture quality.
Backlight: Adjusts the brightness of LCD back light.
Contrast: Adjusts the contrast level of the picture.
Brightness: Adjusts the brightness level of the picture.
Picture
Picture
Mode |
: Standard |
► |
Backlight |
: 5 |
|
Contrast |
: 95 |
|
Brightness |
: 45 |
|
Sharpness |
: 50 |
|
Colour |
: 50 |
|
Tint(G/R) |
: G50 / R50 |
|
Detailed Settings |
|
|
Colour |
: 50 |
|
Tint (G / R) |
: G50 / R50 |
|
DetailedSettings |
|
► |
Picture Options
Picture Reset
English - 14
Sharpness: Adjusts the edge definition of the picture.
Colour: Adjusts colour saturation of the picture.
Tint(G/R): Adjusts the colour tint of the picture.
N Select a picture mode to be adjusted first. The adjusted values are saved for each picture mode.
NWhen you make changes to “Backlight”, “Contrast”, “Brightness”, “Sharpness”, “Colour” or “Tint(G/R)”, the OSD will be adjusted accordingly.
N In Analogue TV, Ext., AV, S-Video modes of the PAL system, you cannot use the “Tint” Function.
N In PC mode, you can only make changes to “Backlight”, “Contrast” and “Brightness”.
N Settings can be adjusted and stored for each external device you have connected to an input of the TV.
NThe energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and then this will reduce the overall running cost.
Detailed Settings
Samsung’s new TVs allow you to make even more precise picture settings than previous models. See below to adjust detailed picture settings.
N “Detailed Settings” is available in “Standard” or “Movie” mode.
NIn PC mode, you can only make changes to “Dynamic Contrast”, “Gamma” and “White Balance” from among the “Detailed Settings” items.
Black adjust → Off / Low / Medium / High
You can select the black level on the screen to adjust the screen depth.
Dynamic Contrast → Off / Low / Medium / High
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma
You can adjust the Primary Colour (Red, Green, Blue) Intensity.
Colour Space
Colour Space is a colour matrix composed of red, green and blue colours. Select your favourite Colour Space to experience the most natural colour.
• Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on programme sources.
• Native: Native Colour Space offers deep and rich colour tone.
• Custom: Adjusts the colour range to suit your preference.
N Customizing the Colour Space
-Colour → Red / Green / Blue / Yellow / Cyan / Magenta
-Adjusts the Colour range to suit your preference. “Colour” is available when “Colour Space” is set to “Custom”.
-Red / Green / Blue: In “Colour”, you can adjust the RGB values for the selected colour.
-Reset: Resets the colour space to the default values.
White Balance
You can adjust the colour temperature for more natural picture colours.
• R-Offset / G-Offset / B-Offset / R-Gain / G-Gain / B-Gain: Changing the adjustment value will refresh the adjusted screen.
• Reset: The previously adjusted white balance will be reset to the factory defaults.
Flesh Tone
You can emphasize the pink ‘flesh tone’ in the picture.
NChanging the adjustment value will refresh the adjusted screen.
Edge Enhancement → Off / On
You can emphasize object boundaries in the picture.
xvYCC → Off / On
Setting the xvYCC mode to on increases detail and colour space when watching movies from an external device (i.e. DVD player).
N“xvYCC” is available when the picture mode is set to “Movie”, and the external input is set to “HDMI” or “Component” mode.
N If “xvYCC” function is active, PIP cannot be selected.
English - 15
Picture Options
NIn PC mode, you can only make changes to the “Colour Tone” and “Size” from among the items in “Picture Options”.
Colour Tone → Cool2 / Cool1 / Normal / Warm1 / Warm2 You can select the most comfortable colour tone to your eyes.
NThe adjusted values are stored according to the selected “Picture” mode.
N“Warm1” or “Warm2” is only activated when the picture mode is “Movie”.
Size
You can select the picture size which best corresponds to your viewing requirements.
TPress the TOOLS button to display “Tools” menu. You can also set the size by selecting “Tools → Picture Size”.
•Auto Wide: Automatically adjusts the picture size to the “16:9” aspect ratio.
•16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
•Wide Zoom: Magnify the size of the picture more than 4:3.
•Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
•4:3: This is the default setting for a video movie or normal broadcasting.
•Just Scan: Use the function to see the full image without any cutoff when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are input.
N Depending on the input source, the picture size options may vary.
N The items available may differ depending on the selected mode.
N In PC Mode, only “16:9” and “4:3” mode can be adjusted.
N Settings can be adjusted and stored for each external device you have connected to an input of the TV.
N Temporary image retention may occur when viewing a static image on the set for more than two hours.
N“Wide Zoom”: Press the ► button to Select “Position”, then press the ENTERE button. Press the ▲ or ▼ button to move the screen up / down. Then press the ENTERE button.
N“Zoom”: Press the ► button to Select “Position”, then press the ENTERE button. Press the ▲ or ▼ button to move the picture up and down. Then press the ENTERE button. Press the ► button to Select “Size”, then press the
ENTERE button. Press the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then press the ENTERE button.
NAfter selecting “Just Scan” in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Select “Position” by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select “Reset”, then press the ENTERE button. You can initialize the setting.
NIf you use the “Just Scan” function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan function.
NWhen Double ( ,
) mode has been set in PIP, the Picture Size cannot be set.
Screen Mode → 16:9 / Wide Zoom / Zoom / 4:3
When setting the picture size to “Auto Wide” in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it.
•16:9: Sets the picture to 16:9 wide mode.
•Wide Zoom: Magnify the size of the picture more than 4:3.
•Zoom: Magnify the size of the picture vertically on screen.
•4:3: Sets the picture to 4:3 normal mode.
NThis function is available in “Auto Wide” mode.
NThis function is not available in “PC”, “Component” or “HDMI” mode.
Digital NR → Off / Low / Medium / High / Auto
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen.
N When the signal is weak, select one of the other options until the best picture is displayed.
DNIe → Off / Demo / On
This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality.
N DNIe™ (Digital Natural Image engine) DNIe™
This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, more detailed image to you. DNIe™ technology will fit every signal into your eyes.
N This function is not available in “Movie” and “Standard” mode.
English - 16
HDMI Black Level → Normal / Low
You can directly select the black level on the screen to adjust the screen depth.
N This function is active only when the external input connects to HDMI (RGB signals).
100Hz Motion Plus → Off / Low / Medium / High / Demo
Removes drag from fast scenes with a lot of movement to provide a clearer picture.
N This function is not available in PC mode.
N If you enable “100 Hz Motion Plus”, noise may appear on the screen. If this occurs, set “100Hz Motion Plus” to “off” or select one of the other options.
Blue Only Mode → Off / On
This function is for AV device measurement experts. This function displays the blue signal only by removing the red and green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Colour and Tint of video equipment such as DVD players, Home Theaters, etc. Using this function, you can adjust the Colour and Tint to preferred values appropriate to the signal level of each video device using the Red / Green / Blue / Cyan / Magenta / Yellow Colour Bar Patterns, without using an additional Blue Filter.
N “Blue Only Mode” is available when the picture mode is set to “Movie” or “Standard”.
Picture Reset → Reset Picture Mode / Cancel
Resets all picture settings to the default values.
N Select a picture mode to be reset. The reset is performed for each picture mode.
You can display a sub picture within the main picture of set programme or video input. In this way, you can watch the picture of set programme or video input from any connected equipment while watching the main picture.
NYou may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke.
TPress the TOOLS button to display “Tools” menu. You can also configure PIP related settings by selecting “Tools → PIP”.
PIP → On / Off
You can activate or deactivate the PIP function.
Main picture |
Sub picture |
Component |
|
HDMI 1, HDMI / DVI 2, HDMI 3, HDMI 4 |
TV, Ext.1, Ext.2, AV |
PC |
|
Source
You can select a source of the sub-picture.
Size → /
/
You can select a size of the sub-picture.
N If main picture is in “HDMI” mode, “Size” is available.
Position → /
/
/
You can select a position of the sub-picture.
N In Double ( ,
) mode, “Position” cannot be selected.
Channel
You can select a channel of the sub-picture only when the “Source” is set to “TV”.
|
Entertainment |
: Off |
Setup |
Energy Saving |
: Off |
PIP |
► |
|
|
Software Upgrade |
|
|
Common Interface |
|
|
PIP |
PIP |
: On |
Source |
: TV |
Size |
: |
Position |
: |
Channel |
: ATV 11 |
|
|
|
LMove EEnter RReturn |
|
|
English - 17
Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1.First, click on ‘Control Panel’ on the Windows start menu.
2.When the control panel window appears, click on ‘Appearance and Themes’ and a display dialog-box will appear.
3.When the control panel window appears, click on ‘Display’ and a display dialogbox will appear.
4.Navigate to the ‘Settings’ tab on the display dialog-box. The correct size setting (resolution)
Optimum: 1920 X 1080 pixels
If a vertical-frequency option exists on your display settings dialog box, the correct value is ‘60’ or ‘60 Hz’. Otherwise, just click ‘OK’ and exit the dialog box.
Display Modes
Both screen position and size will vary depending on the type of PC monitor and its resolution. The resolutions in the table are recommended.
D-Sub Input
|
Mode |
Resolution |
Horizontal |
Vertical Frequency |
Pixel Clock |
Sync Polarity |
|
Frequency (kHz) |
(Hz) |
Frequency (MHz) |
(H / V) |
||
|
|
|
||||
|
IBM |
640 x 350 |
31.469 |
70.086 |
25.175 |
+ / - |
|
720 x 400 |
31.469 |
70.087 |
28.322 |
- / + |
|
|
|
|||||
|
|
640 x 480 |
31.469 |
59.940 |
25.175 |
- / - |
|
|
640 x 480 |
37.861 |
72.809 |
31.500 |
- / - |
|
|
640 x 480 |
37.500 |
75.000 |
31.500 |
- / - |
|
|
800 x 600 |
37.879 |
60.317 |
40.000 |
+ / + |
|
|
800 x 600 |
48.077 |
72.188 |
50.000 |
+ / + |
|
VESA |
800 x 600 |
46.875 |
75.000 |
49.500 |
+ / + |
|
1024 x 768 |
48.363 |
60.004 |
65.000 |
- / - |
|
|
|
1024 x 768 |
56.476 |
70.069 |
75.000 |
- / - |
|
|
1024 x 768 |
60.023 |
75.029 |
78.750 |
+ / + |
|
|
1280 x 1024 |
63.981 |
60.020 |
108.000 |
+ / + |
|
|
1280 x 1024 |
79.976 |
75.025 |
135.000 |
+ / + |
|
|
1360 x 768 |
47.712 |
60.015 |
85.500 |
+ / + |
|
|
1600 x 1200 |
75.000 |
60.000 |
162.000 |
+ / + |
|
CVT |
1920 x 1080RB |
66.587 |
59.934 |
138.500 |
+ / - |
HDMI / DVI Input |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mode |
Resolution |
Horizontal |
Vertical Frequency |
Pixel Clock |
Sync Polarity |
|
Frequency (kHz) |
(Hz) |
Frequency (MHz) |
(H / V) |
||
|
|
|
||||
|
|
640 x 480 |
31.469 |
59.940 |
25.175 |
- / - |
|
|
800 x 600 |
37.879 |
60.317 |
40.000 |
+ / + |
|
VESA |
1024 x 768 |
48.363 |
60.004 |
65.000 |
- / - |
|
1280 x 1024 |
63.981 |
60.020 |
108.000 |
+ / + |
|
|
|
|||||
|
|
1360 x 768 |
47.712 |
60.015 |
85.500 |
+ / + |
|
|
1600 x 1200 |
75.000 |
60.000 |
162.000 |
+ / + |
|
CEA |
1920 x 1080p |
67.500 |
60.000 |
148.500 |
+ / + |
N When using an HDMI / DVI cable connection, you must use the HDMI IN 2 jack. N The interlace mode is not supported.
N The set might operate abnormally if a non-standard video format is selected. N Separate and Composite modes are supported. SOG is not supported.
N Too long or low quality VGA cable can cause picture noise at high resolution modes (1920x1080 or 1600x1200).
English - 18
Setting up the TV with your PC
N Preset: Press the SOURCE button to select PC mode.
Auto Adjustment
Auto Adjustment allows the PC screen of set to self-adjust to the incoming PC video signal. The values of fine, coarse and position are adjusted automatically.
N This function does not work in DVI-HDMI mode.
TPress the TOOLS button to display “Tools” menu. You can also set the Auto Adjustment by selecting “Tools → Auto Adjustment”.
Picture
Brightness : 45
Sharpness : 50
Auto Adjustment |
► |
Screen
Detailed Settings
Picture Options
Picture Reset
Screen
Coarse / Fine: The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned on the center of screen.
PC Position: Adjust the PC’s screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to adjusting the Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position.
Image Reset: You can replace all image settings with the factory default values.
Mode → Standard / Music / Movie / Speech / Custom
You can select the type of special sound effect to be used when watching a given broadcast.
TPress the TOOLS button to display “Tools” menu. You can also configure the sound mode by selecting “Tools → Sound Mode”.
Equalizer
The sound settings can be adjusted to suit your personal preferences.
Mode: You can select a sound mode to suit your personal preferences.
Balance: Controls the balance between the right and left speakers.
100Hz / 300Hz / 1kHz / 2kHz / 3kHz / 10kHz (Bandwidth Adjustment): To adjust the level of different bandwidth frequencies
Reset: Resets the equalizer settings to the default values.
SRS TruSurround XT → Off / On
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.
Sound
Sound
Mode |
: Custom |
|
Equalizer |
|
|
SRS TruSurround XT :Off |
► |
|
Audio Language |
: ---- |
|
Audio Format |
: ---- |
|
Audio Description |
|
|
Auto Volume |
: Off |
|
Select Speaker |
: TV Speaker |
|
Sound Select |
: Main |
|
Sound Reset |
|
|
Select Speaker |
: TV Speaker |
|
Sound Select |
: Main |
|
SoundReset |
|
► |
TPress the TOOLS button to display “Tools” menu. You can also set the SRS TruSurround XT by selecting “Tools → SRS TS XT”.
TruSurround XT, SRS and Symbol are trademarks of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc.
English - 19
Audio Language
You can change the default value for audio languages. Displays the language information for the incoming stream. N While viewing a digital channel, this function can be selected.
N You can only select the language among the actual languages being broadcast.
Audio Format → MPEG / Dolby Digital
When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function.
N While viewing a digital channel, this function can be selected.
N The “Audio Format” appears according to the broadcasting signal.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Audio Description
This is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles the Audio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster. Users can turn the Audio Description On or Off and control the volume.
Audio Description → Off / On: Turn the audio description function on or off.
Volume: You can adjust the audio description volume.
N “Volume” is active when “Audio Description” is set to “On”. N While viewing a Digital channel, this function can be selected.
Auto Volume → Off / On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
Select Speaker → External Speaker / TV Speaker
If you want to hear the sound through separate speakers, cancel the internal amplifier.
N The volume buttons and MUTE buttons do not operate when the “Select Speaker” is set to “External Speaker”. N If you select “External Speaker” in the “Select Speaker” menu, the sound settings will be limited.
|
TV's Internal Speakers |
Audio Out (Optical) to Sound System |
|
RF / AV / S-Video / Component / PC / HDMI |
RF / AV / S-Video / Component / PC / HDMI |
TV Speaker |
Speaker Output |
Sound Output |
External Speaker |
Mute |
Sound Output |
Video No Signal |
Mute |
Mute |
Sound Select
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
Main: Used to listen to the sound of the main picture.
Sub: Used to listen to the sound of the sub picture.
TPress the TOOLS button to display “Tools” menu. You can also set the sound of the sub picture by selecting “Tools → PIP → Sound Select”.
Sound Reset
Reset All / Reset Sound Mode / Cancel: You can restore the Sound settings to the factory defaults.
English - 20
Selecting the Sound Mode
You can set the sound mode in the “Tools” menu. When you set to “Dual l ll”, the current sound mode is displayed on the screen.
|
Audio Type |
|
|
|
Dual 1 / 2 |
Default |
|||
|
Mono |
|
|
|
MONO |
Automatic change |
|||
A2 Stereo |
Stereo |
|
|
STEREO ↔ MONO |
|||||
|
|
|
|||||||
|
Dual |
|
|
DUAL 1 ↔ DUAL 2 |
DUAL 1 |
||||
|
Mono |
|
|
|
MONO |
Automatic change |
|||
NICAM Stereo |
Stereo |
|
|
MONO ↔ STEREO |
|||||
|
|
|
|||||||
Dual |
|
|
MONO ↔ DUAL 1 |
|
|
DUAL 1 |
|||
|
|
|
|
|
|||||
|
|
|
|
DUAL 2 |
|
|
|
||
|
|
|
|
|
|
|
|
|
Tools
Anynet+ (HDMI-CEC) |
|
||
Picture Size |
: |
Auto Wide |
|
Picture Mode |
: |
Standard |
|
Sound Mode |
: |
Custom |
|
Sleep Timer |
: |
Off |
|
SRS TS XT |
: |
Off |
|
Energy Saving |
: |
Off |
|
Duallll |
◄ |
Mono |
► |
|
|
|
|
U Move |
LAdjust |
e Exit |
N If the stereo signal is weak and an automatic switching occurs, then switch to the mono. N This function is only activated in stereo sound signal. It is deactivated in mono sound signal. N This function is only available in TV mode.
Language
You can set the menu language.
Child Lock → On / Off
This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programme by muting out video and audio.
NBefore the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN number.
NThe default PIN number of a new TV set is “0-0-0-0”. You can change the PIN by selecting “Change PIN” from the menu.
N You can lock some channels in Channel List. (refer to page 13)
N “Child Lock” is available only in TV mode.
Change PIN
You can change your personal ID number that is required to set up the TV.
NBefore the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN number.
N The default PIN number of a new TV set is “0-0-0-0”.
NIf you forget the PIN code, press the remote control buttons in the following sequence, which resets the PIN to 0-0-0-0: POWER (Off), MUTE, 8, 2, 4, POWER (On).
Setup
Setup
Setup
Plug&Play |
|
► |
Language |
: English |
|
Time |
|
|
Network Selection |
: Cable |
|
Wireless Network Setup |
|
|
Cable Network Setup |
|
|
Child Lock |
: On |
|
Change PIN |
|
|
Change PIN |
|
|
Parental Lock |
|
|
Subtitle |
|
► |
Teletext Language |
: ---- |
|
Preference |
|
|
DigitalText |
:Enable |
► |
Light Effect |
: Watching TV |
|
Wall-Mount Adjustment |
|
|
Melody |
: Off |
|
Entertainment |
: Off |
|
Energy Saving |
: Off |
|
PIP |
|
|
SoftwareUpgrade |
|
► |
Common Interface
English - 21
Parental Lock → Parental Rating
This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programme by a 4-digit PIN
(Personal Identification Number) code that is defined by the user. - In the ‘Parental Rating’ screen, configure the parental ratings.
N Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN number.
N The default PIN number of a new TV set is “0-0-0-0”. You can change the PIN by selecting “Change PIN” from the menu. N When the parental ratings are set, the “\” symbol is displayed.
NAllow All: Press to unlock all TV ratings. Block All: Press to lock all TV ratings.
Subtitle
You can activate and deactivate the subtitles. Use this menu to set the Subtitle Mode. “Normal” under the menu is the basic subtitle and “Hard of hearing” is the subtitle for a hearing-impaired person.
Subtitle → On / Off: Switches subtitles on or off.
Mode → Normal / Hard of hearing: Sets the subtitle mode.
Subtitle Language: Set the subtitle language.
NIf the programme you are watching does not support the “Hard of hearing” function, “Normal” automatically activates even though “Hard of hearing” mode is selected.
N English is the default in cases where the selected language is unavailable in the broadcast.
O You can select these options simply by pressing the SUBT. button on the remote control.
Teletext Language
You can set the Teletext language by selecting the language type.
N English is the default in cases where the selected language is unavailable in the broadcast.
Preference
Primary Audio Language / Secondary Audio Language / Primary Subtitle Language / Secondary Subtitle Language / Primary Teletext Language / Secondary Teletext Language
Using this feature, users can select one of the languages. The language selected here is the default when the user selects a channel.
If you change the language setting, the Subtitle Language, Audio Language, and the Teletext Language of the Language menu are automatically changed to the selected language.
The Subtitle Language, Audio Language, and the Teletext Language of the Language menu show a list of languages supported by the current channel and the selection is highlighted. If you change this language setting, the new selection is only valid for the current channel. The changed setting does not change the setting of the Primary Subtitle Language, Primary Audio Language, or the Primary Teletext Language of the Preference menu.
Digital Text → Disable / Enable (UK only)
If the programme is broadcast with digital text, this feature is enabled.
NMHEG (Multimedia and Hypermedia Information Coding Experts Group)
An International standard for data encoding systems used in multimedia and hypermedia. This is at a higher level than the MPEG system which includes data-linking hypermedia such as still images, character service, animation, graphic and video files as well as multimedia data. MHEG is user runtime interaction technology and is being applied to various fields including VOD (Video-On-Demand), ITV (Interactive TV), EC (Electronic Commerce), tele-education, tele-conferencing, digital libraries and network games.
English - 22
Light Effect
You can turn on/off the LED on the front of TV according to the situation. Use it for saving power or when the LED dazzles your eyes.
Off: LED will not come on.
In Standby: Turns the LED on in standby mode.
Watching TV: Turns the LED on while watching TV. |
LED |
|
Always: LED is always on.
N Set the “Light Effect” to “Off” to reduce the power consumption.
Melody
Off / Low / Medium / High
The TV power on / off melody sound can be adjusted.
N The Melody does not play
-When no sound is output from the TV because the MUTE button has been pressed.
-When no sound is output from the TV because the (–) Volume button has been pressed.
-When the TV is turned off by Sleep Timer function.
Entertainment
The “Entertainment” mode enables you to select the optimal display and sound for sports, cinema and games.
Off: Switches the “Entertainment” function off.
Sports: Provides the optimal picture and sound quality for sports.
Cinema: Provides the optimal picture and sound quality for movie watching. You can experience a richer picture and enhanced sound.
Game: Provides the optimal picture and sound quality for games. This mode accelerates the playing speed when using an external game console connected to the TV.
NIf you set any of the three “Entertainment” modes to On, the settings will be locked and can not be adjusted. In addition, Picture and Sound mode settings are not allowed. If you want to make Picture and Sound mode adjustments, the “Entertainment” mode must be turned off.
NIf you set any of the three “Entertainment” modes to On, the sound and picture functions will be limited.
NThe “Entertainment” settings are saved for each input source.
OYou can press the E.MODE button on the remote control repeatedly to change
the “Entertainment” setting.
Energy Saving
This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the “Energy Saving” mode option to “High” to reduce eye fatigue as well as power consumption.
Off: Turns off the energy saving function.
Low: Sets the TV to low energy saving mode.
Medium: Sets the TV to medium energy saving mode.
High: Sets the TV to high energy saving mode.
Auto: Automatically adjusts the brightness of the TV screen in accordance with the scenes.
TPress the TOOLS button to display “Tools” menu. You can also set the Energy Saving option by selecting “Tools → Energy
Saving”.
English - 23
Software Upgrade
To keep your product up-to-date with new Digital Television features then |
|
|
|
|
||
software upgrades are periodically broadcast as part of the normal Television |
|
|
|
|
TV Side Panel |
|
signal. It will automatically detect these signals and display the software |
|
|
|
|
|
|
upgrade banner. You are given the option to install the upgrade. |
|
|
|
USB Drive |
||
|
|
|||||
BY USB |
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
||
Insert a USB drive containing the firmware upgrade into TV. Please be careful |
|
|
|
|
|
|
to not disconnect the power or remove the USB drive while upgrades are being |
|
|
|
|
|
|
|
|
|
|
|
||
applied. The TV will turn off and turn on automatically after completing the |
|
|
|
|
|
|
firmware upgrade. Please check the firmware version after the upgrades are |
|
|
|
|
|
|
complete. When software is upgraded, video and audio settings you have made |
|
|
|
|
|
will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade.
BY Channel
Upgrades the software using the broadcasting signal.
Standby Mode Upgrade
To continue software upgrade with master power on, Select On by pressing the ▲ or ▼ button. 45 minutes after entering standby mode, a manual upgrade is automatically conducted. Since the power of the unit is turned on internally, the screen may be on slightly for the LCD product. This phenomenon may continue for more than 1 hour until the software upgrade is completed.
Alternative Software
To display the software version information.
Common Interface
CI Menu
This enables the user to select from the CAM-provided menu. Select the CI Menu based on the menu PC Card.
Application Info.
This contains information on CAM inserted in the CI slot and displays it.
The Application Info inserting is about the CI CARD. You can install the CAM anytime whether the TV is ON or OFF.
1. Purchase the CI CAM module by visiting your nearest dealer or by phone.
2. Insert the CI CARD into the CAM in the direction of the arrow until it fits.
3. Insert the CAM with the CI CARD installed into the common interface slot. (Insert the CAM in the direction of the arrow, right up to the end so that it is parallel with the slot.)
4. Check if you can see a picture on a scrambled signal channel.
English - 24
Clock
Setting the clock is necessary in order to use the various timer features of the TV.
N The current time will appear every time you press the INFO button.
N If you disconnect the power cord, you have to set the clock again.
Clock Mode
You can set up the current time manually or automatically.
• Auto: Set the current time automatically using the time from the digital broadcast.
• Manual: Set the current time to a manually specified time.
Setup
Plug & Play |
|
Language |
: English |
Time |
► |
Network Selection |
: Cable |
Wireless Network Setup |
|
Cable Network Setup |
|
Child Lock |
: On |
Change PIN |
|
Parental Lock
Subtitle
Clock Set |
|
Time |
|
|
Clock |
: -- : -- |
► |
||
You can set the current time manually. |
||||
Sleep Timer |
: Off |
|
||
N Set up this item when you have set “Clock Mode” to “Manual”. |
|
|||
Timer 1 |
: Inactivated |
|
||
N You can set the day, month, year, hour and minute directly by pressing the |
Timer 2 |
: Inactivated |
|
|
number buttons on the remote control. |
Timer 3 |
: Inactivated |
|
|
|
|
Sleep Timer → Off / 30 / 60 / 90 / 120 / 150 / 180 |
|
|
The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, |
UMove EEnter RReturn |
|
120, 150 and 180 minutes). |
||
|
N The TV automatically switches to standby mode when the timer reaches 0.
N To cancel the “Sleep Timer” function, select “Off”.
TPress the TOOLS button to display “Tools” menu. You can also set the sleep timer by selecting “Tools → Sleep Timer”.
Timer 1 / Timer 2 / Timer 3
Three different on / off timer settings can be made.
On Time: Set the hour, minute, and activate / inactivate.
(To activate timer with the setting you’ve chosen, set to “Activate”.)
Off Time: Set the hour, minute, and activate / inactivate.
(To activate timer with the setting you’ve chosen, set to “Activate”.)
Volume: Set the required volume level.
Contents: When the “On Time” is active, you can turn on a specific channel or play back contents such as photo or audio files.
•TV / USB: Select TV or USB. (Make sure that an USB device is connected to your TV.)
•Antenna: Select ATV or DTV.
•Channel: Select the desired channel.
•Music: Select the folder containing MP3 files on the USB device.
•Photo: Select the folder containing JPEG files on the USB device.
Repeat: Select “Once”, “Everyday”, “Mon~Fri”, “Mon~Sat”, “Sat~Sun”, or “Manual”.
N When “Manual” is selected, press the ► button to select the desired day of the week. Press the ENTERE button over the desired day and the cmark will appear.
N You must set the clock first.
N You can set the hour, minute and channel by pressing the number buttons on the remote control.
NAuto Power Off
When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is on for too long time.
English - 25
Network Connection - Cable
Cable Connection for a DHCP Environment
The procedures to set up the network using Dynamic Host Configuration Protocol (DHCP) are described below. Since an IP address, subnet mask, gateway, and DNS are automatically allocated when DHCP is selected, you do not have to enter them manually.
TV Rear Panel
The Modem Port
on the Wall External Modem (ADSL / VDSL / Cable TV)
1 LAN Cable
2Modem Cable
1.Connect the [LAN] port on the rear panel of the TV and the external modem with a LAN Cable.
2.Connect the LAN port on the wall and the external modem with a Modem Cable.
You can connect the LAN via a Sharer (Router).
|
|
IP Sharer |
|
|
TV Rear Panel |
The Modem |
External Modem |
LAN Cable |
Port on the Wall |
(ADSL / VDSL / Cable TV) |
|
|
|
LAN Cable |
Modem Cable
You can connect the LAN port and the TV directly depending on your network status.
TV Rear Panel
The LAN Port on the Wall
LAN Cable
N The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer.
NIf the IP address allocation by the DHCP server has failed, turn the external modem off, turn it on again after at least 10 seconds and then try again.
NFor the connections between the external modem and the Sharer (Router), refer to the owner’s manual of the corresponding product.
N You can connect the TV to the LAN directly without connecting it through a Sharer (Router).
NYou cannot use a manual-connection-type ADSL modem becaus;e it does not support DHCP. You have to use an automatic- connection-type ADSL modem.
English - 26
LAN Connection for Static IP Environment
The procedures to set up the network using a static IP address are described below. You have to manually enter the IP address, subnet mask, gateway, and DNS that are provided by your Internet Service Provider (ISP).
TV Rear Panel
The LAN Port on the Wall
1LAN Cable
1.Connect the [LAN] port on the rear panel of the TV and the LAN port on the wall using the LAN cable.
You can connect the LAN via a Sharer (Router).
The LAN Port |
IP Sharer |
TV Rear Panel |
on the Wall |
|
|
|
|
LAN Cable
LAN Cable
N The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer.
NIf you are using a static IP address, your ISP will inform you of the IP address, subnet mask, gateway, and DNS. You must enter these values to complete the network settings. If you do not know the values, ask your network administrator.
NFor the information on how to configure and connect a Sharer (Router), refer to the owner’s manual for the corresponding product.
N You can connect the TV to the LAN directly without connecting it through a Sharer (Router).
N If you use an IP Sharer (IP Router) that supports DHCP, you can set up the device as either DHCP or static IP. N For the procedures to use a static IP address, ask your Internet Service Provider.
Network Connection - Wireless
You can connect to the network wirelessly through a wireless IP sharer.
|
|
|
TV Side Panel |
|
The LAN Port on |
|
Samsung Wireless |
|
Wireless IP sharer |
LAN Adapter |
|
|
the Wall |
||
|
|
||
|
|
LAN |
|
|
|
Cable |
|
1. |
Connect the ‘Samsung Wireless LAN Adapter’ into the Wiselink terminal of the TV. |
N You must use the ‘Samsung Wireless LAN Adapter’(WIS-08BG) to use a wireless network.
NThe ‘Samsung Wireless LAN Adapter’ is sold separately. Contact a Samsung Electronics agent or service center for purchasing.
N To use a wireless network, your TV must be connected to a wireless IP sharer.
N If the wireless IP sharer supports DHCP, you TV can use a DHCP or static IP address to connect to the wireless network. N You must use a wireless IP sharer that supports IEEE 802.11 B or IEEE 802.11G.
N If the wireless IP sharer allows you to turn on / off the Ping connection function, turn it on.
N Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.
N Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currently being used by another device nearby, this will result in interference and communications may fail.
N When applying the security key for the AP (wireless IP sharer), only the following is supported. 1) Authentication Mode : WEP, WPAPSK, WPA2PSK
2) Encryption Type : WEP, TKIP, AES
If you apply a security system other than the systems listed above, it will not work with the TV.
English - 27
Network Selection |
|
Language |
: English |
|
Select Cable or Wireless as the method to connect to the network. |
Setup |
Time |
|
|
N The menu is activated only if the ‘Samsung Wireless LAN Adapter’ is |
NetworkSelection |
:Cable |
► |
|
connected. (See page 26) |
|
Wireless Network Setup |
|
|
Cable: Connect to network using a cable. |
|
Cable Network Setup |
|
|
Wireless: Connect to network wirelessly. |
|
Child Lock |
: On |
|
|
|
Change PIN |
|
|
Cable Network Setup |
|
Parental Lock |
|
|
|
Subtitle |
|
|
|
Internet Protocol Setup → Auto / Manual |
|
Teletext Language |
: - - - - |
|
|
|
|
|
Network Test: You can test or confirm the network connection status after setting up the network.
N When unable to connect to a wired network
If your Internet service provider has registered the MAC address of the device used to connect to the Internet for the first time and authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to the Internet as the MAC address differs from that of the device (PC) used to connect to the Internet the first time. In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV) to the Internet. If your Internet service provider requires an ID or password to connect to the Internet (network), your TV may not be able to connect to the Internet. In this case, you have to enter your ID or password when connecting to the Internet using an Internet Sharer (Router).
The internet connection may fail due to a firewall problem. In this case, contact your Internet service provider. If you cannot connect to the Internet even if you have followed the procedures of your Internet service provider, please contact a Samsung Electronics Service Center.
Wireless Network Setup
Internet Protocol Setup → Auto / Manual
Network Test: You can test or confirm the network connection status after setting up the network.
N When unable to connect to a wireless network
Your TV may fail to locate an AP that is configured as a private SSID type. In this case, please change theAP settings and try again. If your Internet service provider has registered the MAC address of the device used to connect to the Internet for the first time and authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to the Internet as the MAC address differs from that of the device (PC) used to connect to the Internet the first time. In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV) to the Internet. If you cannot connect to the Internet even if you have followed the procedures of your Internet service provider, please contact a Samsung Electronics Service Center.
Select Access Point: You can select the IP sharer to use when using a wireless network.
N If a wireless Access Point is not in the Access Point list, press the Red button. N When the connection is made, you will be returned to the screen automatically.
N If you selected an Access Point that requires security authentication, enter the security key. N If you have selected an Access Point with a security authentication:
-The Security Key input screen appears.
-Enter the security key and press the ENTEREbutton.
-Using the Remote Control Buttons on the Security Key Input Screen.
Cable Network Setup-Auto
If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically configured. Please check if the LAN cable is connected. (See page 26)
1.Set “Network Selection” to “Cable”.
2.Select “Cable Network Setup”.
3.Set “Internet Protocol Setup” to “Auto”.
4.Select “Network Test” to check the network connectivity.
English - 28