Samsung LE40F7, LE46F7 User Manual

Contact SAMSUNG WORLD-WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

LCD TV

LE40F7 LE46F7

Country

BELGIUM CZECH REPUBLIC DENMARK FINLAND FRANCE GERMANY HUNGARY ITALIA LUXEMBURG NETHERLANDS NORWAY POLAND PORTUGAL RUSSIA SLOVAKIA SPAIN SWEDEN U.K UKRAINE

Customer Care Center

02 201 2418 844 000 844 38 322 887 09 693 79 554 08 25 08 65 65 (€ 0,15/Min) 01805 - 121213 (€ 0,12/Min) 06 40 985 985 199 153 153 02 261 03 710 0900 20 200 88 (€ 0.10/Min) 231 627 22 0 801 801 881 80 8 200 128 8-800-200-0400 0850 123 989 902 10 11 30 08 585 367 87 0870 242 0303 8-800-502-0000

Web Site

www.samsung.com/be www.samsung.com/cz www.samsung.com/dk www.samsung.com/fi www.samsung.com/fr www.samsung.de www.samsung.com/hu www.samsung.com/it www.samsung.lu www.samsung.com/nl www.samsung.com/no www.samsung.com/pl www.samsung.com/pt www.samsung.ru www.samsung.com/sk www.samsung.com/es www.samsung.com/se www.samsung.com/uk www.samsung.com/ur

Owner’s Instructions

Before operating the unit,

please read this manual thoroughly,

and retain it for future reference.

BN68-01047Q-00

ON-SCREEN MENUS

PC DISPLAY

PICTURE IN PICTURE (PIP)

TELETEXT

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center

• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.

English

CONNECTING AND PREPARING YOUR TV

List of Parts....................................................................................... 2

Installing the Wall Mount Kit ................................................ 2

Viewing the Control Panel ......................................................... 3

Viewing the Connection Panel ................................................. 4

Viewing the Remote Control ..................................................... 6

Installing Batteries in the Remote Control ........................... 6

Switching On and Off .................................................................. 7

Placing Your Television in Standby Mode ............................. 7

Plug & Play ....................................................................................... 7

SETTING THE CHANNELS

Storing Channels Automatically .............................................. 8

Storing Channels Manually ........................................................ 8

Setting the Channel Manager .................................................. 9

Activating the Child Lock ...................................................... 10

Sorting the Stored Channels ..................................................... 10

Assigning Channels Names ....................................................... 11

Fine Tuning Channel Reception ............................................... 11

Using the LNA (Low Noise Amplifier) Feature .................... 12

SETTING THE PICTURE

Changing the Picture Standard ................................................ 12

Adjusting the Custom Picture................................................... 12

Changing the Colour Tone ......................................................... 13

Adjusting the Color Tone with the Preferred Color

Component...................................................................................... 13

Resetting the Picture Settings to the

Factory Defaults ............................................................................. 13

Changing the Picture Size .......................................................... 14

Changing the Auto Wide (4:3) .................................................. 14

Freezing the Current Picture ..................................................... 15

Digital Noise Reduction .............................................................. 15

DNIe Demo (Digital Natural Image engine) ........................ 15

Viewing the Picture In Picture (PIP) ........................................ 16

SETTING THE SOUND

Changing the Sound Standard ........................................... 17

Adjusting the Sound Settings ............................................. 17

Setting the TruSurround XT (SRS TSXT ) ........................... 17

Adjusting the Volume Automatically ................................ 18

Selecting the Internal Mute .................................................. 18

Listening to the Sound of the Sub Picture...................... 18

Resetting the Sound Settings to the

Factory Defaults ........................................................................ 19

Connecting Headphones ...................................................... 19

Selecting the Sound Mode ................................................... 19

SETTING THE TIME

Setting and Displaying the Current Time ........................ 19

Setting the Sleep Timer.......................................................... 20

Switching the Television

On and Off Automatically ..................................................... 20

SETTING THE OTHERS

Choosing Your Language ...................................................... 21

Using Game Mode ................................................................... 21

Setting the Blue Screen Mode /

Selecting the Melody ............................................................. 22

Using the Energy Saving Feature ....................................... 22

Selecting the Source ............................................................... 23

Editing the Input Source Names ........................................ 23

WISELINK

Using the WISELINK Function .............................................. 24

Using the WISELINK Menu .................................................... 25

Using the PHOTO (JPEG) List ................................................ 25

Viewing Photo File Information .......................................... 27

Selecting a Photo and Slide Show ..................................... 27

Rotating ....................................................................................... 28

Zooming-in ................................................................................. 29

Copying Image Files ................................................................ 30

Deleting Image Files................................................................ 30

Printing a Photo ........................................................................ 31

Using the MP3 List ................................................................... 31

Copying Music Files ................................................................. 32

Deleting Music Files ................................................................ 32

Using the Setup Menu ........................................................... 33

USING THE TELETEXT FEATURE

Teletext Decoder ...................................................................... 34

Displaying the Teletext Information .................................. 34

Selecting a Specific Teletext Page ...................................... 35

Using Fastext to Select a Teletext Page ............................ 35

Setting Up Your Remote Control ........................................ 36

Remote Control Codes ........................................................... 38

SETTING THE PC

Setting up Your PC Software

(Based on Windows XP) ......................................................... 41

Display Modes ........................................................................... 41

Setting the PC ............................................................................ 42

RECOMMENDATIONS FOR USE

Using the Anti-Theft Kensington Lock ............................. 43

Troubleshooting:

Before Contacting Service Personnel ............................... 43

Technical and Environmental Specifications ................ 44

Warning! Important Safety Instructions Wiring the Mains Power Supply Plug (UK Only) Wa rran ty C ard

Symbol Press Important Note One-Touch

Button

English-1

List of Parts

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

Remote Control & Batteries

(AAA x 2)



Owner’s Instructions

Warranty card / Safety Guide / Registration Cards (Not available in all locations)

Power Cord Cover-Bottom Cleaning Cloth

Installing the Wall Mount Kit

Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.

 Registration Cards

Remove the stand and cover the bottom hole with a cap and fasten with two screws.

English-2

Viewing the Control Panel

The product colour and shape may vary depending on the model.

SOURCE

Toggles between all the available input soures (TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI1, HDMI2). In the on-screen menu, use this button as you use the ENTER on the remote control.

button

Press to change channels. In the on-screen menu, use the as you use the  and  buttons on the remote control. on the TV by using the Channel buttons.)

(Without the Remote Control, you can turn

buttons

Press to see an on-screen menu of your TV’s features.

Press to decrease or increase the volume. In the on-screen menu, use the as you use the  and  buttons on the remote control.

buttons

Speakers

(

Power)

Press to turn the TV on and off. Power Indicator Blinks and turns off when the power is on and lights up in stand-by mode.

Remote Control Sensor

Aim the remote control towards this spot on the TV.

English-3

Viewing the Connection Panel

[Rear Panel Jacks]

Power Input

Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable.

[Side Panel Jacks]

English-4

Connecting an Aerial or Cable Television Network

To view television channels correctly, a signal must be received by the set from one of the following sources:

- An outdoor aerial / A cable television network / A satellite network

Connecting HDMI/DVI

Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players, AV receivers and digital TVs).

- No additional Audio connection is needed for an HDMI to HDMI connection. What is HDMI?

- “High Definition Multimedia Interface” allows the transmission of high definition digital video data and multiple

channels of digital audio ( 5.1 channels).

- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).

The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.

You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the “R - AUDIO - L” terminal

on DVI for sound output.

- When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure that

it has been set to a compatible video output mode as shown in the table below. Failure to observe this may result in picture distortion, image breakup or no picture.

Supported modes for DVI or HDMI

480i 50 Hz 60 Hz

- Do not attempt to connect the HDMI/DVI connector to a PC or Laptop Graphics Card. (This will result in a blank screen being displayed)

- If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box to the VCR (or DVD) and connect the VCR (or DVD) to your set.

- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio out connectors on the A/V device.

- Headphone may be connected to the headphone output (

Component

Connecting Set-Top Box, VCR or DVD

Connect the VCR or DVD SCART cable to the SCART connector of the VCR or DVD.

Connecting External A/V Devices

- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.

X X O

480p

O O O

While the headphone is connected, the sound from the built-in speakers will be disabled.

SERVICE

- Service connection for qualified service engineer.

Connecting AUDIO

- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio in

connectors on the Amplifier or DVD Home Theater.

Connecting Computer

Connect the D- Sub cable (optional) to “PC (PC IN)” on the rear of your set and the other end to the Video Card of your computer.

- Connect the stereo audio cable (optional) to “AUDIO (PC IN)” on the rear of your set and the other end to “Audio Out” of the sound card on your computer.

Connecting Component Devices (DTV/DVD)

- Connect component video cables (optional) to component connector (“P

ends to corresponding component video out connectors on the DTV or DVD.

- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector (“P

The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.

- Connect RCA audio cables (optional) to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD.

- This LCD TV displays its optimum picture resolution in 1080p mode.

- This LCD TV displays its maximum picture resolution in 1080p mode.

Kensington Lock

- The Kensington lock (optional) is a device used to physically fix the system when used in a public place.

- If you want to use a locking device, contact the dealer where you purchased the TV.

The place of the Kensington Lock may be different depending on its model.

576i

X X O

) on the rear of your set.

R”, “ P B”, “Y”) on your set.

576p

O X O

R”, “ P B”, “Y”) on the rear of your set and the other

720p

O O O

1080i

O O O

1080p

O O O

English-5

Viewing the Remote Control

Selects a target device to be controlled by the Samsung remote

control

(TV, DVD, STB, CABLE, VCR)

(Refer to page 36~40)

Television Standby button

Number buttons for direct channel access

One/Two-digit channel selection

It displays "Channel Manager" on the screen.

Selects the TV mode directly VCR/DVD Functions

Rewind, Stop, Play/Pause,

Fast/Forward

Volume increase Volume decrease

Temporary sound switch-off

Menu display and change confirmation

Picture-In-Picture On / Off

Picture effect selection

Sound effect selection

Sound mode selection

SRS TSXT selection

SET: Adjusts 5 separate devices - TV,

DVD, STB, CABLE, or VCR. RESET: When your remote does not work, change the batteries and press the “RESET” button for 2-3 seconds before use.

Available source selection

When pressing this button, a number of

buttons on the remote control (e.g. Selects a target device, volume, channel and MUTE buttons) light up for a few seconds and then turn off to save power. This function is to conveniently use the remote control at night or when dark.

The performance of the remote control may be affected by bright light.

This is a special remote control for the visually impaired, and has Braille points on the Power, Channel and Volume buttons.

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the figure.

2. Install two AAA size batterie

Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.

3. Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a

long time. The remote control can be used up to about 23 feet from the TV.

(Assuming typical TV usage, the batteries last for about one year.)

If the remote control doesn’t work, check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special fluorescent light or neon sign nearby?

English-6

Previous channel

Automatic Power-off

This function enables you to load saved photo (JPEG) and audio files (MP3)

and to view or play them on the TV.

P : Next channel P

: Previous channel

Exit the OSD Control the cursor in the menu

Use to see information on the current broadcast

Picture size selection

Selects the PC mode directly

Picture freeze

Input source selection

Teletext Functions

Exit from the Teletext display

Teletext index

Teletext hold Teletext size selection

Teletext store

Teletext mode selection (LIST/FLOF)

Teletext sub page

P : Teletext next page P

: Teletext previous page

Teletext cancel

Teletext reveal

Alternately select Teletext, Double, or Mix.

Fastext topic selection

Switching On and Off

The mains lead is attached to the rear of your set.

1. Plug the mains lead into an appropriate socket.

The standby indicator lights up on the front of the set.

2. Press the button on the front of the set.

You also can press the POWER button or the

The programme that you were watching last is reselected automatically.

( ) button on the remote control to turn the TV on.

3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or button on the right side of the set.

When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.

4. To switch your set off, press the POWER button again.

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1. Press the POWER

The screen is turned off and a blue standby indicator appears on the front of your set.

button on the remote control.

2. To switch your set back on, simply press the POWER , numeric buttons (0~9) or channel up/down (

It is best to unplug the set from the mains and aerial.

/ ) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example).

Plug & Play

When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available.

1. Press the POWER button on the remote control. The message “Start Plug & Play” is displayed with “OK” selected.

Press the  or  buttons to select “Shop” or “Home”, then the ENTER button.

We recommend setting the TV to Home mode for the best picture in your home envronment. Shop mode is only intended for use in retail environments. If the unit is accidentally set to Shop Mode, press and hold the MENU button on the side

panel of the TV for five seconds to return to Dynamic (Home) mode.

3. Select the appropriate language by pressing the  or  button. Press the ENTER button to confirm your choice.

4. The message “Check antenna input.” is displayed with “OK” selected. Press the ENTER button.

Please check that the antenna cable is connected correctly.

5. Select the appropriate country by pressing the  or  button. Press the ENTER button to confirm your choice.

6. The “Auto Store” menu is displayed with the “Start” selected. Press the ENTER button.

The channel search will start and end automatically. After all the available channels are stored, the “Clock Set” menu appears. Press the

ENTER

7. Press the ENTER button. Select the “Hour” or “Minute” by pressing the

Set the “Hour” or “Minute” by pressing the

You can also set the hour and minute by pressing the number buttons on the remote control.

8. Press the ENTER button to confirm your setting.

 Language: Select your language.  Country: Select your country.  Auto Store: Automatically scans for and stores channels available in the local area.  Clock Set: Sets the current time for the TV clock.

button at any time to interrupt the memorization process.

 or 

 or 

English-7

button.

If you want to reset this feature...

1. Press the MENU button to display the menu. Press the  or 

button

to select “Setup”, then press the

ENTER

button.

2. Press the ENTER button again, to select “Plug & Play”.

3. The message to “Start Plug & Play” is displayed.

- Storing Channels Automatically

- Storing Channels Manually

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.

1. Press the MENU button to display the menu. Press the  or  button to select “Channel”, then press the

2. Press the ENTER button to select “Country”.

3. Select the appropriate country by pressing the  or  button.

Press the ENTER button to confirm your choice.

4. Press the  or  button to select “Auto Store”, then press the

5. Press the ENTER button.

The TV will begin memorizing all of the available channels. Press the

ENTER

button at any time to interrupt the memorization process and return to the “Channel” menu.

6. After all the available channels are stored, the “Sort” menu appears.

ENTER button.

Storing Channels Manually

You can store up to 100 channels, including those received via cable networks. When storing channels manually, you can choose:

Whether or not to store each of the channels found. The programme number of each stored channel which you wish to identify.

1. Press the MENU button to display the menu. Press the  or  button to select “Channel”, then press the

2. Press the  or  button to select “Manual Store”, then press the

3. Press the

ENTER button to select “Programme”.

4. To assign a programme number to a channel, find the correct number by pressing the  or  button and then press the

You can also set a programme number by pressing the number buttons on the remote control.

ENTER button.

English-8

5. Press the  or  button to select “Colour System”, then press the ENTER button.

6. Select the colour standard required by pressing the  or  button then, press the

7. Press the  or  button to select “Sound System”, then press the

ENTER button.

8. Select the sound standard required by pressing the  or  button, then press the

If there is an abnormal sound or no sound, re-select the sound system required.

If you know the number of the channel to be stored, press the  or  button to select “Channel”. Press the ENTER button.

ENTER button.

Select C (Air channel) or S (Cable channel) by pressing the  or  button. Press the  button to select channel. Select the required number by pressing the  or  button and then press the

Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)

You can also set a channel number by pressing number buttons on the remote control.

ENTER button.

10. If you do not know the channel numbers, press the  or  button to select “Search”. Press the ENTER button. Search by pressing the  or  button and then press the ENTER button.

11. Press the  or  button to select “Store”. Press the ENTER button to select “OK”.

12. Repeat steps 3 to 11 for each channel to be stored.

 Programme: Selects a program number for the channel.  Colour System: Sets the colour supporting system.  Sound System: Sets the sound supporting system.

Setting the Channel Manager

Set the channels according to your preference. You can easily delete, add, or lock the channel you want.

1. Press the MENU button to display the menu. Press the  or  button

to select “Channel”, then press the

Press the  or  button to select “Channel Manager”,

then press the ENTER button.

Press the ENTER button again, to select “Channel Manager”.

Press the  button to select “ ” line.

Press the  or  button to select the undesired channel,

then press the ENTER button to cancel.

6. Repeat steps 5 for each channel to be selected or canceled

7. Press the EXIT button to exit.

“ ”

is active when “Child Lock” is selected to “On”.

You can select these options by simply pressing the CH MGR button on the remote control.

 Channel: Selects a channel.  Search: Scans for the frequency value for the channel.  Store: Saves your settings.

ENTER button.

English-9

Activating the Child Lock

This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out video and audio. Child Lock cannot be released using the buttons on the side. Only the remote control can release the Child Lock setting, so keep the remote control away from children.

1. Press the MENU button to display the menu. Press the  or  button

to select “Channel”, then press the

then press the ENTER button.

button.

then press the ENTER button.

8. Repeat steps 7 for each channel to be locked or unlocked.

9. Press the EXIT button to exit.

selected on

Sorting the Stored Channels

You can exchange the numbers of two channels, in order to:

automatically stored.

most often.

1. Press the MENU button to display the menu. Press the  or  button

to select “Channel”, then press the

 or  button repeatedly. Press the ENTER button.

change and then press the

ENTER button.

Press the  or  button to select “Channel Manager”,

Press the  or  button to select “Child Lock”, then press the ENTER button.

Press the  or  button to select “On”. Press the

ENTER

button.

Press the  or  button to select “Channel Manager”, then press the ENTER

Press the  button to select “ ” line.

Press the  or  button to select the channels you want to lock,

Select “On” or “Off ” in “Child Lock” to easily turn the channels which

Press the  or  button to select “Sort”, then press the

“ ”

to be active or inactive.

Modify the numeric order in which the channels have been

Give easily remembered numbers to the channels that you watch

ENTER button.

ENTER

button.

Select channel number that you wish to change by pressing the

The selected channel number and name are moved to right side.

Press the

 or 

button to move to the position in which you would like to

ENTER

The selected channel is exchanged with the one previously stored to the chosen

number.

button.

Repeat steps 3 to 4 for another channel to be sorted.

Press the EXIT button to exit.

English-10

Assigning Channels Names

Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names.

1. Press the MENU button to display the menu. Press the  or  button

to select “Channel”, then press the

Press the  or  button to select “Name”, then press the

If necessary, select the channel to be assigned to a new name by

pressing the

Repeat steps 3 to 4 for each channel to be assigned to a new name.

Press the EXIT button to exit.

Fine Tuning Channel Reception

Use fine tuning to manually adjust a particular channel for optimal reception.

1. Use the number buttons to directly select the channel that

you want to fine tune.

2. Press the MENU button to display the menu.

Press the  or  button to select “Channel”, then press the

3. Press the  or  button to select “Fine Tune”, then press the

4. Press the  or  button to adjust the fine tuning.

Press the

5. Press the EXIT button to exit.

Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand

side of the channel number in the channel banner. And the channel number turns red.

To reset the fine-tuning, select “Reset” by pressing the  or  button and then press the

ENTER button.

ENTER

button.

 or 

The selection bar is displayed around the name box.

To. ..

Select a letter, number or symbol

Move on the next letter

Move back the previous letter

Confirm the name

The characters available are :

Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters ( -, space)

ENTER

button. Press the ENTER button.

button.

Then...

Press the

 or 

Press the  button

Press the

Press the ENTER button

button



button

ENTER button.

English-11

Using the LNA (Low Noise Amplifier) Feature

This function is very useful in the situation that the TV is used in a weak signal area. LNA amplifies the TV signal in the weak signal area, a low-noise preamplifier boosts the incoming signal.

1. Press the MENU button to display the menu.

Press the  or  button to select “Channel”, then press the

Press the  or  button to select “LNA”, then press the ENTER button.

Select “Off“ or “On“ by pressing the  or  button.

Press the ENTER button.

Press the EXIT button to exit.

If the picture is noisy with the LNA set to On, select Off. LNA setting must be set for each individual channel.

Changing the Picture Standard

You can select the type of picture which best corresponds to your viewing requirements.

1. Press the MENU button to display the menu. Press the  or 

button to select “Picture”, then press the

Press the ENTER button again, to select “Mode”.

ENTER button again.

Press the

 or 

button to select the desired picture effect.

ENTER

button.

Press the EXIT button to exit.

(Refer to “Adjusting the Custom Picture”)

The Picture mode must be adjusted separately for each input source. You can return to the factory defaults picture settings by selecting the “Reset”.

You can also press the P.MODE button on the remote control to select one of the picture settings.

Press the

 Dynamic: Selects the picture for high-definition in a bright room.  Standard: Selects the picture for optimum display in a normal environment.  Movie: Selects the picture for comfortable display in a dark room.  Custom: Select to view your favorite display settings.

(Refer to “Resetting the Picture Settings to the Factory Defaults” on page 13)

ENTER button.

Adjusting the Custom Picture

Your set has several settings which allow you to control picture quality.

1. To select the desired picture effect, follow the

“Changing the Picture Standard” instructions number 1 to 3.

Press the

particular item.

Press the EXIT button to exit.

 Contrast: Adjusts the lightness and darkness between objects and the background.  Brightness: Adjusts the brightness of the whole screen.  Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.  Colour: Adjusts the colours, making them lighter or darker.  Tint (NTSC only):

The adjusted values are stored according to the selected Picture mode. I n PC Mode, Only “Contrast”, “Brightness” and “Colour” can be adjusted

 or  button

ENTER

 or  button

to select a particular item.

button.

to decrease or increase the value of a

Press the ENTER button.

Adjusts the colour of objects, making them more red or green for a more natural look.

English-12

Changing the Colour Tone

You can select the most comfortable colour tone to your eyes.

1. To select the desired picture effect, follow the

“Changing the Picture Standard” instructions number 1 to 3 on page 12.

Press the  or  button to select “Colour Tone”, then press the ENTER button.

Press the

 or  button

Press the

 Cool2: Makes the colour temperature bluer than “Cool1” menu.

 Cool1: Makes whites bluish.  Normal: Keeps whites white.

ENTER

Press the EXIT button to exit.

The adjusted values are stored according to the selected Picture mode.

to select the desired colour tone setting.

button.

 Warm1: Makes whites reddish.  Warm2: Makes the colour temperature

redder than “Warm1” menu.

Adjusting the Color Tone with the Preferred Color Component

You can adjust a picture’s color tone with your preferred color component.

1. To select the desired picture effect, follow the

“Changing the Picture Standard” instructions number 1 to 3 on page 12.

Press the  or  button to select “Colour Manager”, then press the ENTER

button.

Press the

 or  button

Press the

item.

 R Contrast: the background.  G Contrast: and the background.  B Contrast: the background.

 R Brightness:  G Brightness:  B Brightness:  Reset:

You cannot select a "Colour Tone" in the "Colour Manager".

ENTER

Press the

 or  button

Press the ENTER button.

Press the EXIT button to exit.

Lightens or intensifies the red component of the border between objects and

Lightens or intensifies the green component of the border between objects

Lightens or intensifies the blue component of the border between objects and

Adjusts the brightness of the red component for the entire screen. Adjusts the brightness of the green component for the entire screen. Adjusts the brightness of the blue component for the entire screen.

Resets all settings to the defaults.

to select a particular item.

button.

to decrease or increase the value of a particular

Resetting the Picture Settings to the Factory Defaults

You can return to the factory defaults picture settings.

1. To select the desired picture effect, follow the

“Changing the Picture Standard” instructions number 1 to 3 on page 12.

2. Press the  or  button to select “Reset”, then press the ENTER button.

Press the EXIT button to exit.

The “Reset” will be set for each picture mode.

English-13

Changing the Picture Size

You can select the picture size which best corresponds to your viewing requirements.

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the ENTER button.

2. Press the  or  button to select “Size”, then press the ENTER button.

3. Select the required option by pressing the  or  button.

 Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.

You can select these options by simply pressing the P.SIZE button on the remote control.

 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.  WIDE 4:3 : Magnify the size of the picture more than 4:3.  Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.  4:3: This is the default setting for a video movie or normal broadcasting.

Zoom : Select by pressing the  or  buttons. Use the  or  button to move the

picture up and down. After selecting , use the  or  button to magnify or

reduce the picture size in the vertical direction.

WIDE 4:3 : Move the screen up/down using the  or  button after selecting the

by pressing the  or ENTER button.

Changing the Auto Wide (4:3)

Press the

ENTER

button.

Press the EXIT button to exit.

“Auto Wide” function is available only in "TV", "Ext1", "Ext2", "AV", and "S-Video" mode.

In PC Mode, only “16:9” and “4:3” mode can be adjusted.

Adjusts the display picture size to 4:3 appropriate for input signal

1. Press the MENU button to display the menu. Press the  or  button to

select “Picture”, then press the ENTER button.

2. Press the  or  button to select “Auto Wide (4:3)”, then press the

ENTER button.

3. Select the required option by pressing the  or  button. Press the

ENTER

Press the EXIT button to exit.

These functions don’t work in "Component", "PC", "HDMI1" and "HDMI2" mode.

button.

English-14

+ 35 hidden pages

Samsung LE40F7, LE46F7 User Manual

Contents

List of Parts

Installing the Wall Mount Kit

Viewing the Control Panel

Viewing the Connection Panel

Viewing the Remote Control

Installing Batteries in the Remote Control

Switching On and Off

Placing Your Television in Standby Mode

Plug & Play

Storing Channels Automatically

Storing Channels Manually

Setting the Channel Manager

Activating the Child Lock

Sorting the Stored Channels

Assigning Channels Names

Fine Tuning Channel Reception

Using the LNA (Low Noise Amplifier) Feature

Changing the Picture Standard

Adjusting the Custom Picture

Changing the Colour Tone

Adjusting the Color Tone with the Preferred Color Component

Resetting the Picture Settings to the Factory Defaults

Changing the Picture Size

Changing the Auto Wide (4:3)