Samsung LE52A558, LE52A559, LE46A559P4C, LE46A558P3C, LE46A556P1C User Manual

...
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
AUSTRIA 0800-SAMSUNG (726-7864) www.samsung.com/at BELGIUM 0032 (0)2 201 24 18 www.samsung.com/be
CZECH REPUBLIC
DENMARK 70 70 19 70 www.samsung.com/dk EIRE 0818 717 100 www.samsung.com/ie FINLAND 030-6227 515 www.samsung.com/
FRANCE
GERMANY 01805 - SAMSUNG (726-7864) (€ 0,14/Min) www.samsung.com HUNGARY 06-80-SAMSUNG (726-7864) www.samsung.com ITALIA 800-SAMSUNG (726-7864) www.samsung.com LUXEMBURG 0035 (0)2 261 03 710 www.samsung.com/be NETHERLANDS 0900-SAMSUNG (726-7864) (€ 0,10/Min) www.samsung.com/nl NORWAY 815-56 480 www.samsung.com/no
POLAND
PORTUGAL 80820-SAMSUNG (726-7864) www.samsung.com/pt SLOVAKIA 0800-SAMSUNG (726-7864) www.samsung.com/sk SPAIN 902 10 11 30 www.samsung.com SWEDEN 0771-400 200 www.samsung.com/se SWITZERLAND 0800-SAMSUNG (726-7864) www.samsung.com/ch U.K 0845 SAMSUNG (7267864) www.samsung.com TURKEY 444 77 11 www.samsung.com ESTONIA 800-7267 www.samsung.ee LATVIA 800-7267 www.samsung.com/lv LITHUANIA 8-800-77777 www.samsung.lt KAZAHSTAN 8-10-800-500-55-500 www.samsung.kz KYRGYZSTAN 00-800-500-55-500 ­RUSSIA 8-800-555-55-55 www.samsung.ru TADJIKISTAN 8-10-800-500-55-500 ­UKRAINE 8-800-502-0000 www.samsung.com UZBEKISTAN 8-10-800-500-55-500 www.samsung.uz
Customer Care Centre
844 000 844 www.samsung.com/cz
3260 SAMSUNG (€ 0,15/Min) 08 25 08 65 65 (€ 0,15/Min)
0 801 801 881 022-607-93-33
Web Site
www.samsung.com
www.samsung.com/pl
LCD TV
user manual
BN68-01409J-01
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at
www.samsung.com/global/register
Model Serial No.
This product is only applicable to Finnish, Swedish and Danish broadcasts. Broadcasts are not supported in other countries.
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. (See back cover for more informations.)
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image
• retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders
caused by the above effect are not covered by the Warranty.
Displaying still images from Video games and PC for longer than a certain period of time may produce
• partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages
Contents
CONNECTING AND PREPARING YOUR TV
List of Parts ........................................................ 3
Installing the Stand ............................................. 3
Installing the Wall Mount Kit ............................... 3
Viewing the Control Panel .................................. 4
Viewing the Connection Panel ........................... 5
Viewing the Remote Control ............................... 8
Installing Batteries in the Remote Control .......... 9
Switching On and Off ......................................... 9
Placing Your Television in Standby Mode........... 9
Viewing the Menus ........................................... 10
Using the TOOLS Button .................................. 10
Plug & Play ........................................................11
SETTING THE CHANNELS
Storing Channels Automatically ....................... 12
Storing Channels Manually .............................. 13
Adding / Locking Channels .............................. 14
Sorting the Stored Channels ............................ 15
Assigning Channels Names ............................. 15
Fine Tuning Channel Reception ....................... 16
SETTING THE PICTURE
Changing the Picture Standard ........................ 17
Adjusting the Custom Picture ........................... 18
Conguring Detailed Settings on the Picture ... 18
Resetting the Picture Settings to the Factory
Defaults ............................................................ 19
Conguring Picture Option ............................... 20
Viewing the Picture In Picture (PIP) ................. 22
SETTING THE SOUND
Sound Features ................................................ 23
Selecting the Sound Mode ............................... 24
Connecting Headphones (Sold separately) ..... 24
FUNCTION DESCRIPTION
Choosing Your Language ................................. 26
Setting the Light Effect
(depending on the model) ................................ 27
Melody / Entertainment / Energy Saving ......... 27
Selecting the Source ........................................ 29
Editing the Input Source Names ...................... 29
USING THE DTV FEATURE
Previewing the DTV Menu System .................. 30
Selecting the Country ....................................... 31
Updating the Channel List Automatically .......... 32
Updating the Channel List Manually ................ 33
Editing Your Favourite Channels ...................... 34
Selecting Channel List ..................................... 36
Displaying Programme Information .................. 36
Viewing the EPG (Electronic Programme Guide)
Information ....................................................... 37
Using the Scheduled List ................................. 38
Setting the Default Guide ................................. 38
Viewing All Channels and Favourite Channels 39
Adjusting the Menu Transparency .................... 39
Setting up the Parental Lock ............................ 40
Setting the Subtitle ........................................... 41
Setting the Subtitle Mode ................................. 41
Selecting the Audio Format .............................. 41
Selecting the Audio Description ....................... 42
Viewing Product Information ............................ 42
Checking the Signal Information ...................... 43
Upgrading the Software ................................... 43
Viewing Common Interface .............................. 44
Selecting the CI (Common Interface) Menu ..... 44
Resetting .......................................................... 45
Selecting the Preferred Language
(Subtitle, Audio or Teletext) .............................. 45
Preference ........................................................ 46
English
SETTING THE TIME
Setting and Displaying the Current Time .......... 25
Setting the Sleep Timer .................................... 25
Switching the Television On and Off
Automatically .................................................... 26
English - 1
SETTING THE PC
Setting up Your PC Software
(Based on Windows XP) .................................. 47
Display Modes .................................................. 47
Setting up the TV with your PC ........................ 48
WISELINK
Using the WISELINK Function ......................... 49
Using the WISELINK Menu .............................. 50
Using the PHOTO (JPEG) List ......................... 51
Using the MP3 List ........................................... 54
Using the Setup Menu ...................................... 55
RECOMMENDATIONS FOR USE
Teletext Feature ............................................... 62
Auto Wall-Mount (Sold separately) ................... 64
Using the Anti-Theft Kensington Lock
(depending on the model) ................................ 65
Troubleshooting: Before Contacting Service
Personnel ......................................................... 66
Technical and Environmental Specications ... 67
ABOUT ANYNET
What is Anynet+? ............................................ 56
Connecting Anynet+ Devices ........................... 56
Setting Up Anynet+ .......................................... 57
Scanning and Switching between Anynet+
Devices ............................................................ 58
Recording ......................................................... 60
Listening through a Receiver ........................... 60
Check Points before Requesting Service ......... 61
+
Symbol Press Note One-Touch
English - 2
Button

List of Parts

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
M4 X L16
Remote Control
& Batteries
(AAA x 2)
Owner’s Instructions
Warranty card / Safety Guide / Registration Cards (Not available in all locations)
The stand and stand screw may not be included depending on the model.
Power Cord Cover-Bottom
Warranty card
Stand Screw
X 4
Safety Guide
Stand Cleaning Cloth

Installing the Stand

2
1
Registration Cards
1. Connect your LCD TV and the stand.
Two or more people should carry the TV.
Make sure to distinguish between the front and back of the stand when assembling them.
2. Fasten two screws at position 1 and then fasten two screw at position 2.
Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed
down, it may lean to one side. The stand is installed for models with the screen size of 37 inch and above.

Installing the Wall Mount Kit

Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.
Remove the stand and cover the bottom hole with a
cap and fasten with two screws.
English - 3

Viewing the Control Panel

8 8
4
1
2
3
5 6
7
1
2
3
4
6
7
58
8
Front Panel buttons Touch each button to operate.
Side Panel buttons
The product colour and shape may vary depending on the model.
SOURCE
1
Toggles between all the available input sources (TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI1, HDMI2, HDMI3, DTV). In the on-screen
menu, use this button as you use the
ENTER
button on the remote control.
MENU
2
Press to see an on-screen menu of your TV’s features.
3
Press to decrease or increase the volume. In the on-screen menu, use the buttons as you
use the ◄ and ► buttons on the remote control.
4
Press to change channels. In the on-screen menu, use the buttons as you use the ▼ and ▲ buttons on the remote control. (Without the Remote Control, you can turn on the TV by using the Channel buttons.)
English - 4
5
Power Indicator
Blinks and turns off when the power is on and lights up in stand-by mode.
6
7
(Power)
Press to turn the TV on and off.
Remote Control Sensor
Aim the remote control towards this spot on the TV.
Speakers
8

Viewing the Connection Panel

1 2 3 4 5
[Side Panel Jacks]
6
3
7
8
Power Input
The product colour and shape may vary depending on the model.
Whenever you connect an external device to your TV, make sure that power on the unit is turned off
When connecting an external device, match the colour of the connection terminal to the cable.
1
PC IN [PC] / [AUDIO]
Connect to the video and audio output jack on your PC.
-
2
COMPONENT IN
Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of
-
your set and the other ends to corresponding component video out connectors on the DTV or DVD. If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box
-
to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("P your set.
-
The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
-
Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD.
3
HDMI IN 1, HDMI IN 2, HDMI IN 3
Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)
-
No additional Audio connection is needed for an HDMI to HDMI connection.
-
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
-
!@#
0
R", "PB", "Y") on
9
English - 5
What is HDMI?
“High Denition Multimedia interface” allows the transmission of high denition digital video data
-
and multiple channels of digital audio.
-
The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.
The TV may not output sound and pictures may be displayed with abnormal colour when DVD
players/Cable Boxes/Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-L] jacks on the back of the TV. If this happens, contact the company that provided the DVD player/Cable Box/Satellite
receiver to conrm the HDMI version, then request a rmware update. HDMI cables that are not
1.3 may cause annoying icker or no screen display.
DVI IN(HDMI2) [R-AUDIO-L]
DVI audio outputs for external devices.
-
Supported modes for HDMI/DVI and Component
HDMI/DVI 50Hz X X X O O O O HDMI/DVI 60Hz X O X X O O O
Component O O O O O O O
ANT IN
4
To view television channels correctly, a signal must be received by the set from one of the following sources:
An outdoor aerial / A cable television network / A satellite network
-
5
SERVICE
Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing angle using your remote control.
6
COMMON INTERFACE Slot
When not inserting "CI CARD" in some channels,"Scrambled Signal" is displayed on the screen.
-
The pairing information containing a telephone number, CI CARD ID, Host ID and other information
-
will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.
When the channel information conguration has nished, the
-
message "Updating Completed" is displayed, indicating that the channel list is now updated.
You must obtain a CI CARD from a local cable service
provider. Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD may cause damage to it. Insert the CI-Card in the direction marked on it.
The place of the COMMON INTERFACE Slot may be different depending on its model.
7
WISELINK
Connect a USB mass storage device to view photo les (JPEG) and play audio les (MP3)
-
480i 480p 576i 576p 720p 1080i 1080p
English - 6
8 S-VIDEO or VIDEO / R-AUDIO-L
Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or
-
Camcorder. Connect RCA audio cables to "R-AUDIO-L" on your set and the other ends to corresponding audio
-
out connectors on the A/V device.
9
Headphones jack
Headphone may be connected to the headphone output on your set. While the head phone is
-
connected, the sound from the built-in speakers will be disabled.
0 AUDIO OUT [R-AUDIO-L]
-
Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to
corresponding audio in connectors on the Amplier or DVD Home Theatre.
! DIGITAL AUDIO OUT (OPTICAL)
-
Connect to a Digital Audio Component.
When the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the TV
outputs 2 channel audio only. If you want to hear 5.1 channel audio, connect the Optical jack on
the DVD player or Cable/Satellite Box directly to an Amplier or Home Theater, not the TV.
@
EXT 1, EXT 2
Connector
EXT 1 O O O Only TV or DTV output is available. EXT 2 O O Output you can choose.
Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
-
#
Kensington Lock (depending on the model)
The Kensington lock (optional) is a device used to physically x the system when used in a public
-
Video Audio (L/R) RGB Video + Audio (L/R)
Input Output
place.
If you want to use a locking device, contact the dealer where you purchased the TV.
-
The location of the kensington lock may be different depending on its model.
-
English - 7

Viewing the Remote Control

1 Television Standby button 2 Selects the TV and DTV
mode directly
3 Number buttons for directNumber buttons for direct
channel access
4
One/Two-digit channel
selection
5
+: Volume increase
-: Volume decrease
6
Temporary sound switch-Temporary sound switch-
off
7
Electronic Program GuideElectronic Program Guide
(EPG) display
8
Use to quickly selectUse to quickly select
frequently used functions.
9
Use to see information onUse to see information on
the current broadcast
0
Colour buttons :Colour buttons :
Use these buttons in the Channel list and WISELINK, etc.
@
Press to select the optionalPress to select the optional
display and sound modes for sports, cinema and games.
#
Use these buttons in theUse these buttons in the
DMA, WISELINK, and Anynet+. ( : This remote can be used to control recording on Samsung recorders with the Anynet+ feature)
$
Available source selectionAvailable source selection
% Previous channel ^
P<: Next channel
P>: Previous channel
&
Displays the main on-Displays the main on-
screen menu
*
This function enables youThis function enables you
to view and play photo and music files from an external device.
(
Returns to the previousReturns to the previous
menu
Control the cursor in theControl the cursor in the
)
menu
a
Exit the on-screen menuExit the on-screen menu
b
Use this when connecting
a SAMSUNG DMA (Digital Media Adapter) device through an HDMI interface and switching to DMA mode. (The DMA button is optional.) For more information on the operating procedures, refer to the user manual of the DMA. This button is available when “Anynet+(HDMI-CEC)" is
“On” (see page 57)
c
Picture size selectionPicture size selection
d
Digital subtitle displayDigital subtitle display
e
It display "Channel List"It display "Channel List"
on the screen.
Teletext Functions
2 Exit from the teletext display 7 Teletext store 8 Teletext size selection 9 Teletext reveal 0 Fastext topic selection ! Alternately select Teletext,
Double, or Mix. $ Teletext mode selection
(LIST/FLOF)
% Teletext sub page ^ P<: Teletext next page
P>: Teletext previous page
& Teletext index ( Teletext hold a Teletext cancel
The performance of the remote control may be affected by bright light.
English - 8

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the
gure.
2.
Install two AAA size batteries.
Make sure to match the "+" and "–" ends of the batteries with the
diagram inside the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time.
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special uorescent light or neon sign nearby?

Switching On and Off

The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
The standby indicator lights up
2. Press the P button You also can press the POWER button or the TV/DTV button on the remote control to turn
the TV on. The programme that you were watching last is reselected automatically.
3. Press the numeric button (0~9) or channel up/down (</>) button on the remote control or
button
on your set.
When you switch the set on for the very rst time, you will be asked to choose language in which the
menus are to be displayed.
4. To switch your set off, press the POWER button again.
on your set.
on your set.

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
Press the POWER button on the remote control.
1.
The screen is turned off and a red standby indicator appears on your set.
2.
To switch your set back on, simply press the POWER , numeric buttons (0~9), TV/DTV button or
channel up/down (</>) button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for
example). It is best to unplug the set from the mains and aerial.
English - 9

Viewing the Menus

1. With the power on, press the MENU button.
The main menu appears on the screen. The menu’ s left side has
icons: Picture, Sound, Channel, Setup, Input, Digital Menu.
2.
Press the ▲ or ▼ button to select one of the icons.
Then press the
ENTER
button to access the icon’s sub-menu.
3. Press the EXIT button to exit. The on-screen menus disappear from the screen after about
one minute.

Using the TOOLS Button

You can use the TOOLS button to select your frequently used functions quickly and easily. The “Tools” menu change depending on which external input mode you are viewing.
Press the TOOLS button.
1.
The “Tools” menu will appear.
2.
Press the ▲ or ▼ button to select a menu.
3. Press the ▲/▼/◄/►/
use the selected items. For a more detailed description of each function, refer to the corresponding page.
Anynet+ (HDMI-CEC), see page 57
Picture Mode, see page 17
Sound Mode, see page 23
Sleep Timer, see page 25
SRS TS XT, see page 23
Energy Saving, see page 28
Dual l-ll, see page 24
PIP, see page 22
Auto Adjustment, see page 48
ENTER
buttons to display, change, or
TV
Mode : Standard Backlight 7 Contrast 95 Brightness 45 Sharpness 50 Colour 50
Tint G50 R50
Detailed Settings sMore
Move Enter Return
Anynet+ (HDMI-CEC) Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off Dual l-ll : Mono
Move Enter Exit
Picture
Tools
English - 10

Plug & Play

When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available.
Any functions related to Digital TV (DVB) will only work in
countries or areas where DVB-T (MPEG2) digital terrestrial
signals are broadcasted. Please conrm with your local dealer
if you can receive DVB-T signals. Although this TV set follows
the DVB-T specication, maintaining compatibility with the future
coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not be available in some countries.
This product is only applicable to Finnish, Swedish and Danish broadcasts. Broadcasts are not
supported in other countries.
1.
Press the POWER button on the remote control.
The message "Start Plug & Play" is displayed with "OK" selected.
2.
Select the appropriate language by pressing the ▲ or ▼ button.
Press the
3. Press the ◄ or ► button to select “Store Demo” or “Home Use”, then the
➣ ➣
4. The message "Check antenna input." is displayed with "OK" selected.
Press the
5. Select the appropriate country by pressing the▲ or ▼ button.
Press the
6. The “Auto Store” menu is displayed with the “Start” selected. Press the ENTER button.
➣ ➣
7.
The DTV channel scan menu appears.
➣ ➣
8. Press the
Select the "Month", "Day", "Year", "Hour", or "Minute" by pressing the Set the "Month", "Day", "Year", "Hour", or "Minute" by pressing the
ENTER
We recommend setting the TV to "Home Use" mode for the best picture in your home environment. "Store Demo" mode is only intended for use in retail environments.
If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use”
(Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
ENTER
Please check that the antenna cable is connected correctly.
ENTER
Press the ENTER button at any time to interrupt the memorization process. The channel search will start and end automatically.
If the country is set to "Others"
"Clock Set" screen appears when searching for the analog channel is finished.
If the country is set to “Finland”
Press the
If the country is set to “Sweden”, or “Denmark”
Press the ▲ or ▼ button to select “Cable” or “Aerial”. Press the
Aerial: scanning for aerial services Cable: scanning for cable services
For detailed descriptions about DTV channel update, refer to page 32 of this manual. If the DTV channel is updated, the Source in the source list of the Input menu is automatically changed to DTV.
After all the available channels are stored, the “Clock Set” menu appears.
ENTER
You can also set the “Month”, “Day”, “Year”, “Hour” and "Minute" by pressing the number buttons
on the remote control.
button to conrm your choice.
button.
button to conrm your choice.
ENTER
button to select “Start”.
button.
ENTER
Plug & Play
Start Plug & Play.
Enter
ENTER
button.
or ► button.
or ▼ button.
OK
button.
English - 11
9. Press the
When you have nished, press the
ENTER
Even if the
button to conrm your setting. The message “Enjoy your viewing” is displayed.
ENTER
ENTER
button is not pressed, the message will automatically disappear after
button.
several seconds.
Language: Select your language.
Country: Select your country.
Auto Store: Automatically scans for and stores channels available in the local area.
Clock Set: Sets the current time for the TV clock.
If you want to reset this feature...
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER
2. Press the
button.
ENTER
button again, to select "Plug & Play".
For further details on setting up options, refer to the page 11.
The “Plug & Play” feature is only available in the TV mode.

Storing Channels Automatically

-
Storing Channels Manually
-
TV
Plug & Play Language : English Time Light Effect :
Auto Wall-Mount
Melody : Off Entertainment : Off Energy Saving : Off
PIP
Move Enter Return
Start Plug & Play.
Enter Return
TV
Country : Finland Auto Store Manual Store Channel Manager Sort Name Fine Tune
Move Enter Return
Setup
In Watching TV
Plug & Play
OK
Enter Return
Channel
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.
Press the MENU button to display the menu.
1.
Press the ▲ or ▼ button to select "Channel", then press the
2. Press the
ENTER
button to select "Country".
3. Select the appropriate country by pressing the ▲ or ▼ button.
Press the
ENTER
button to conrm your choice.
Even though you have changed the country setting in this menu, the country setting for DTV is not changed. (Refer to page 31)
4. Press the ▲ or ▼ button to select "Auto Store", then press the
5. Press the
➣ ➣
ENTER
button.
The TV will begin memorizing all of the available channels. Press the
ENTER
button at any time to interrupt the memorization process and return to the
"Channel" menu.
6. After all the available channels are stored, the "Sort" menu appears. (refer to page 15)
English - 12
ENTER
ENTER
button.
button.

Storing Channels Manually

Not available in DTV or external input mode.
You can store television channels, including those received via cable networks. When storing channels manually, you can choose:
♦ Whether or not to store each of the channels found. ♦ The programme number of each stored channel which you wish
TV
Country : Finland Auto Store Manual Store Channel Manager Sort Name Fine Tune
to identify.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
button.
2. Press the ▲ or ▼ button to select "Manual Store", then press
the
ENTER
button.
3. Select the required option by pressing the ▲ or ▼ button, then
press the
ENTER
button.
Move Enter Return
Move Enter Return
TV
Programme : P 2 Colour System : Auto Sound System : BG Channel : C 3 Search : 77 MHz Store : ?
4. When you are satised with your setting, press the ENTER
5. Press the EXIT button to exit.
Programme (Programme number to be assigned to a channel)
-
Colour System: Auto/PAL/SECAM/NTSC4.43
-
Sound System: BG/DK/I/L
-
Channel (When you know the number of the channel to be stored)
-
-
➣ ➣
Search (When you do not know the channel numbers)
-
-
button.
Move Enter Return
Press the ▲ or ▼ button until you nd the correct number.
You can also select the channel number directly by pressing the numeric buttons (0~9).
Press the ▲ or ▼ button to select the required colour standard.
Press the ▲ or ▼ button to select the required sound standard.
Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel). Press the ► button, then press the ▲ or ▼ button to select the required number.
You can also select the channel number directly by pressing the numeric buttons (0~9). If there is abnormal sound or no sound, re-select the sound standard required.
Press the ▲ or ▼ button to start the search. The tuner scans the frequency range until the rst channel or the channel that you selected is
received on the screen.
Store (When you store the channel and associated programme number)
Set to "OK" by pressing the
-
Channel mode
-
P (Programme mode): When completing tuning, the broadcasting stations in your area have been
ENTER
button.
assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode.
-
C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode.
-
S (Cable channel mode): You can select a channel by entering the assigned number for each cable
channel in this mode.
Channel
Manual Store
English - 13

Adding / Locking Channels

Not available in DTV or external input mode.
Using the Channel Manager, you can conveniently lock or add channels.
Press the MENU button to display the menu.
1.
Press the or button to select "Channel", then press the
ENTER
2. Press the or button to select "Channel Manager", then
press the
Adding channels
Using the Channel List, you can add channels.
3. Select Channel List by pressing the
4. Move to the ( ) eld by pressing the ▲, ▼, ◄ or ►
button, select a channel to be added, and press the
ENTER
button.
ENTER
button.
ENTER
button.
button to add the channel.
If you press the
ENTER
button again, the ( ) symbol next to the channel disappears and the channel is not added. “
” is active when "Child Lock" is selected to "On".
TV
Country : Finland Auto Store Manual Store Channel Manager Sort Name Fine Tune
Move Enter Return
TV
Channel List Child Lock : Off
Move Enter Return
Channel
Channel Manager
♦ Locking channels
This feature allows you to prevent unauthorized users, such as
children, from watching unsuitable programmes by muting out video and audio.
5. Press the ▲ or ▼ button to select "Child Lock", then press the ENTER
button.
6. Select "On" by pressing the ▲ or ▼ button, then press the ENTER
button.
7. Press the ▲ or ▼ button to select "Channel List", then press
the
ENTER
button.
8. Move to the ( ) eld by pressing the ▲, ▼, ◄ or ► button, select a channel to be locked, and press the
ENTER
button.
If you press the
ENTER
button again, the ( ) symbol next to the channel disappears and the channel lock is cancelled.
A blue screen is displayed when "Child Lock" is activated.
9. Press the EXIT button to exit.
Select "On" or "Off" in "Child Lock" to easily turn the channels
which selected on "
" to be active or inactive.
You can select these options by simply pressing the CH LIST
button on the remote control
Channel List
P 1 C3
1 / 10 Prog. 0 C-­1 C3 2 BBC 1 3 C74 4 C75 5 C76 6 S3 7 S4 8 S6 9 S7
Add Lock
Move Enter
Page Return
English - 14

Sorting the Stored Channels

This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store.
Not available in DTV or external input mode.
Press the MENU button to display the menu.
1.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
button.
2. Press the ▲ or ▼ button to select "Sort", then press the ENTER
button.
3. Select the channel number that you wish to change by pressing the ▲ or ▼ button. Press the ENTER button.
The selected channel number and name are moved to right
side.
4. Select the number of the programme to which the channel is to
be moved by pressing the ▲ or ▼ button.
5. Press the ENTER button. The channel is moved to its new position and all other channels are shifted accordingly.
6. Repeat steps 3 to 5 for another channel to be sorted.
7. Press the EXIT button to exit.
TV
Country : Finland Auto Store Manual Store Channel Manager Sort Name Fine Tune
Move Enter Return
TV
Prog. Ch. Name 0 C--
1 C23
2 C16 3 C3 4 S1 s
Move Enter Return

Assigning Channels Names

Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names.
Not available in DTV or external input mode.
Press the MENU button to display the menu.
1.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
button.
2. Press the ▲ or ▼ button to select "Name", then press the ENTER
button.
3. If necessary, select the channel to be assigned to a new
name by pressing the ▲ or ▼ button. Press the
ENTER
button
The selection bar is displayed around the name box.
4.
To... Then...
Select a letter, number or symbol Press the ▲ or ▼ button Move on the next letter Press the ► button Move back the previous letter Press the ◄ button
Conrm the name
The following characters are available: Letters of the alphabet (A~Z) / Numbers (0~9) / Special
Press the
ENTER
button
characters (+, -, *, /, space)
5. Repeat steps 3 to 4 for each channel to be assigned to a new name.
6. Press the EXIT button to exit.
TV
Country : Finland Auto Store Manual Store Channel Manager Sort Name Fine Tune
Move Enter Return
TV
Prog. Ch. Name 0 C-- -----
1 C23 -----
2 C16 ----­3 C3 ----­4 S1 ----­ s
Move Enter Return
Channel
Sort
Channel
Name
English - 15

Fine Tuning Channel Reception

Use fine tuning to manually adjust a particular channel for optimal reception.
Not available in DTV or external input mode.
Use the number buttons to directly select the channel that
1.
you want to ne tune.
2.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
3. Press the ▲ or ▼ button to select "Fine Tune", then press
the
4. Press the ◄ or ► button to adjust the ne tuning. Press the
5. Press the EXIT button to exit.
Fine tuned channels that have been saved are marked with an asterisk "*" on the right-hand side of the channel number in the channel banner. And the channel number turns red.
To reset the ne-tuning, select "Reset" by pressing the ▲ or ▼ button and then press the
ENTER
button.
button.
ENTER
button.
ENTER
button.
TV
Country : Finland Auto Store Manual Store Channel Manager Sort Name Fine Tune
Move Enter Return
P 1
Adjust Save Return
Channel
Fine Tune
Reset
0
English - 16

Changing the Picture Standard

You can select the type of picture which best corresponds to your viewing requirements.
1.
Press the MENU button to display the menu.
Press the
2. Press the
3. Press the ▲ or ▼ button to select the desired picture effect.
Press the
4. Press the EXIT button to exit.
The Picture mode must be adjusted separately for each input
source.
Easy Setting
1.
Press the TOOLS button on the remote control.
2.
Press the ▲ or ▼ button to select “Picture Mode”.
3. Press the ◄ or ► button to select the desired picture mode.
4. Press the EXIT or TOOLS button to exit.
ENTER ENTER
ENTER
button, to select "Picture". button again, to select "Mode".
button.
Dynamic: Selects the picture for high-definition in a bright room.
Standard: Selects the picture for optimum display in a normal environment.
Movie: Selects the picture for comfortable display in a dark room.
TV
Mode : Standard Backlight 7 Contrast 95 Brightness 45 Sharpness 50 Colour 50
Tint G50 R50
Detailed Settings sMore
Move Enter Return
TV
Mode : Standard
Backlight 7 Contrast 95 Brightness 45 Sharpness 50 Colour 50
Tint G50 R50
Detailed Settings sMore
Move Enter Return
Anynet+ (HDMI-CEC) Picture Mode Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off Dual l-ll : Mono
Move Adjust Exit
Tools
Picture
Picture
Dynamic
Standard
Movie
English - 17

Adjusting the Custom Picture

Your set has several settings which allow you to control picture quality.
1.
To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
2. Press the ▲ or ▼ button to select a particular item. Press the ENTER
button.
3. Press the ◄ or ► button to decrease or increase the value of a
particular item. Press the
ENTER
button.
4. Press the EXIT button to exit.
Backlight: Adjusts the screen brightness by adjusting the LCD
backlight brightness. (0~10) Contrast: Adjusts the lightness and darkness between objects
and the background. Brightness: Adjusts the brightness of the whole screen.
Sharpness: Adjusts the outline of objects to either sharpen them
or make them more dull. Colour: Adjusts the colours, making them lighter or darker.
Tint: Adjusts the colour of objects, making them more red or
green for a more natural look.
The adjusted values are stored according to the selected Picture mode.
In PC mode, you can only make changes to "Backlight”, “Contrast" and “Brightness”.
In Analogue TV, Ext., AV, S-Video modes of the PAL system, you cannot use the "Tint" Function.
You can return to the factory defaults picture settings by selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory Defaults" on page 19)
The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and that this will reduce the overall running cost.
TV
Mode : Standard Backlight 7 Contrast 95 Brightness 45 Sharpness 50 Colour 50
Tint G50 R50
Detailed Settings sMore
Move Enter Return
Backlight
Move Adjust Return
Picture
Conguring Detailed Settings on the Picture
You can set detailed picture settings.
1. Press the MENU button to display the menu.
Press the
2. Press the
ENTER ENTER
button, to select "Picture".
button to select “Mode”.
Press the ▲ or ▼ button to select “Standard” or “Movie”, then
press the
ENTER
button.
3. Press the ▲ or ▼ button to select "Detailed Settings", then press
the
ENTER
button.
4. Select the required option by pressing the ▲ or ▼ button, then
press the
5. When you are satised with your setting, press the
ENTER
button.
ENTER
button.
6. Press the EXIT button to exit. "Detailed Settings" is available in "Standard" or "Movie" mode.
➣ ➣
In PC mode, you can only make changes to “Dynamic Contrast”, “Gamma” and “White Balance” from among the “Detailed Settings” items.
Black Adjust: Off/Low/Medium/High
You can directly select the black level on the screen to adjust the screen depth.
Dynamic Contrast: Off/Low/Medium/High
You can adjust the screen contrast so that the optimal contrast is provided.
TV
Mode : Standard Backlight 7 Contrast 95 Brightness 45 Sharpness 50 Colour 50
Tint G50 R50
Detailed Settings sMore
Move Enter Return
TV
Black Adjust : Off Dynamic Contrast Gamma : 0 Colour Space : Custom White Balance Flesh Tone : 0 Edge Enhancement
xvYCC
Move Enter Return
Picture
Detailed Settings
: Medium
: On
: Off
7
English - 18
Gamma: -3 ~ +3
You can adjust the Primary Colour (Red, Green, Blue) Intensity.
Press the ◄ or ► button until you reach the optimal setting.
Colour Space: Auto/Native/Custom
Colour space is a Colour matrix composed of “Red”, “Green” and “Blue” Colours.
Select your favourite Colour space to experience the most natural Colour.
Auto: Auto Color Space automatically adjusts to the most natural color tone based on program
sources.
Native: Native Color Space offers deep and rich color tone. Custom: Adjusts the color range to suit your preference.
Customizing the Colour Space
Colour: Red/Green/Blue/Yellow/Cyan/Magenta
Adjusts the Colour range to suit your preference.
“Colour” is available when “Colour Space” is set to “Custom”. Press the ▲ or ▼ button to select “Red”, “Green”, “Blue”, “Yellow”, “Cyan” or “Magenta”.
Press the
ENTER button.
Red/Green/Blue: In “Colour”, you can adjust the RGB values for the selected colour.
Press the ▲ or ▼ button to select "Red", "Green" or "Blue" to change it. Press the
ENTER button.
Press the ◄ or ► button to decrease or increase the value of a particular item. Press the
ENTER button. Reset: Resets the colour space to the default values.
White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset
You can adjust the colour temperature for more natural picture colours. R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the
adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the
ENTER
button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.
Flesh Tone: -15 ~ +15
You can emphasize the pink 'flesh tone' in the picture.
Press the ◄ or ► button until you reach the optimal setting.
Changing the adjustment value will refresh the adjusted screen.
Edge Enhancement: Off/On
You can emphasize object boundaries in the picture.
xvYCC: Off/On
Setting the xvYCC mode to On increases detail and colour space when watching movies from an external device (ie. DVD player) connected to the HDMI or Component IN jacks. You must set the Picture Mode to Movie to enjoy this feature.
Only available in "HDMI" and "Component" on "Movie" mode.
If xvYCC function is active, PIP cannot be selected.

Resetting the Picture Settings to the Factory Defaults

You can return to the factory defaults picture settings.
To select the desired picture effect, follow the "Changing the
1.
Picture Standard" instructions number 1 to 3 (On page 17).
2.
Press the ▲ or ▼ button to select "Reset", then press the
ENTER
button.
3. Press the ▲ or ▼ button to select "OK" or "Cancel".
Press the
ENTER
button.
4. Press the EXIT button to exit.
The "Reset" will be set for each "Picture" mode.
English - 19
TV
More Picture Options
Reset : OK
Move Enter Return
Picture
OK
Cancel
Conguring Picture Option
1. Press the MENU button to display the menu.
Press the
ENTER
button, to select "Picture".
2. Press the ▲ or ▼ button to select "Picture Options", then press
the
ENTER
button.
TV
More Picture Options Reset : OK
3. Select the required option by pressing the ▲ or ▼ button, then
press the
4. When you are satised with your setting, press the
button.
5. Press the EXIT button to exit.
Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2
You can select the most comfortable colour tone to your eyes.
Size: Auto Wide/16:9/Wide Zoom/Zoom/4:3/Just Scan
ENTER
In PC mode, you can only make changes to the “Colour
Tone” and “Size” from among the items in “Picture Options”.
The adjusted values are stored according to the selected "Picture" mode.
button.
ENTER
Move Enter Return
TV
Colour Tone : Normal Size Screen Mode : 16:9 Digital NR : Auto
DNIe HDMI Black Level
Movie Plus Blue Only Mode
Move Enter Return
“Warm1” or “Warm2” is only activated when the picture mode is "Movie".
You can select the picture size which best corresponds to your viewing requirements.
Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.
♦ ♦
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
4:3: This is the default setting for a video movie or normal broadcasting.
Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i/ 1080p) or Component (1080i/1080p) signals are input.
"Auto Wide" function is available only in "TV", "DTV", "Ext.1", "Ext.2", "AV", and "S-Video" mode.
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
Settings can be adjusted and stored for each external device you have connected to an input of
the TV. Temporary image retention may occur when viewing a static image on the set for more than two
hours.
"Wide Zoom": Move the screen up/down using the ▲ or ▼ button after selecting the
pressing the ► or ENTER button. "Zoom": Select by pressing the ◄ or ►button. Use the ▲ or ▼ button to move the picture up
and down. After selecting , use the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. When Double (
After selecting “Just Scan” in HDMI (1080i/1080p) or Component (1080i/1080p) mode:
, ) mode has been set in PIP, the Picture Size cannot be set.
Select by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture. Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER button. You can initialize the setting.
If you use the “Just Scan” function with HDMI 720p input, 1 line will be cut at the top, bottom, left
and right as in the overscan function.
Picture
Picture Options
: Auto Wide
: Off
: Normal
: Low
: Off
by
You can select these options by simply pressing the P.SIZE button on the remote control.
English - 20
Screen Mode: 16:9/Wide Zoom/Zoom/4:3
When setting the picture size to "Auto Wide" in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it.
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnify the size of the picture vertically on screen.
♦ ♦
4:3: Sets the picture to 4:3 normal mode.
This function is available in "Auto Wide" mode.
This function is not available in "PC", "Component" or "HDMI" mode.
Digital NR: Off/Low/Medium/High/Auto
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen.
When the signal is weak, select one of the other options until the best picture is displayed.
DNIe: Off/ Demo/On This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality.
DNIe™ (Digital Natural Image engine)
This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, more detailed image to you. eyes. This function is not available in "Movie" and "Standard" mode.
HDMI Black Level: Normal/Low
You can directly select the black level on the screen to adjust the screen depth.
This function is active only when the external input connects to HDMI(RGB signals).
Movie Plus: Off/Low/Medium/High/Demo
You can view more natural skin and clear text even in fast moving scenes.
Use this function when watching movies.
This function is not available in “Wide Zoom” and “Zoom” modes.
This function is not available when "PIP" is set to "On".
It is not supported in HDMI 1080p/24Hz, 25Hz, 30Hz mode.
Blue Only Mode: Off/On
This function is for AV device measurement experts. This function displays the blue signal only by removing the red and green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Colour and Tint of video equipment such as DVD players, Home Theaters, etc.
Using this function, you can adjust the Colour and Tint to preferred values appropriate to the signal level of each video device using the Red/Green/Blue/ Cyan/Magenta/Yellow Colour Bar Patterns, without using an additional Blue Filter.
“Blue Only Mode” is available when the picture mode is set to “Movie” or “Standard”.
DNIe™ technology will t every signal into your
English - 21

Viewing the Picture In Picture (PIP)

You can display a sub picture within the main picture of set programme or video input. In this way, you can watch the picture of set programme or video input from any connected equipment while watching the main picture.
Press the MENU button to display the menu.
1.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER
2. Press the▲ or ▼ button to select "PIP", then press the
ENTER
3. Select the required option by pressing the ▲ or ▼ button, then
press the
4. When you are satisfied with your setting, press the
button.
5. Press the EXIT button to exit.
You may notice that the picture in the PIP window becomes
slightly unnatural when you use the main screen to view a game or karaoke.
button.
button.
ENTER
button.
ENTER
TV
Plug & Play
Language : English Time Light Effect :
Auto Wall-Mount
Melody : Off Entertainment : Off Energy Saving : Off PIP
Move Enter Return
Mode : Custom
TV
Equalizer PIP : On
SRS TS XT : Off Source : TV
Auto Volume : Off Size :
Internal Mute : Off Position :
Reset Programme : P 1
Move Enter Return
Move Enter Return
Setup
In Watching TV
PIP
Easy Setting
1. Press the
2.
Press the ▲ or ▼ button to select “PIP”, then press the
ENTER
3. Press the ▲ or ▼ button to select a particular item.
4. Press the ◄ or ► button to select the required option.
5. Press the EXIT or TOOLS button to exit.
PIP: On/Off
You can activate or deactivate the PIP function.
Main picture Sub picture
TOOLS button on the remote control.
button.
Anynet+ (HDMI-CEC) Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off PIP
Move Enter Exit
PIP : On Source : TV Programme : P 1 Size : Position :
Component TV, Ext.1, Ext.2, AV, DTV HDMI 1, 2, 3 TV, Ext.1, Ext.2, AV, DTV
Move Adjust Return
PC TV, Ext.1, Ext.2, AV, DTV
Source
You can select a source of the sub-picture. Size:
/ /
You can select a size of the sub-picture.
If main picture is in "HDMI" mode, "Size" is available.
Position:
/ / /
You can select a position of the sub-picture.
Programme
In Double (
, ) mode, "Position" cannot be selected.
You can select a channel of the sub-picture only when the "Source" is set to "TV" or "DTV".
Tools
PIP
English - 22

Sound Features

1. Press the MENU button to display the menu. Press the ▲ or ▼
button to select "Sound", then press the
2. Select the required option by pressing the ▲ or ▼ button, then
press the
ENTER
button.
3. When you are satised with your setting, press the
button.
4. Press the EXIT button to exit.
Mode: Standard/Music/Movie/Speech/Custom
You can select the type of special sound effect to be used when watching a given broadcast.
Easy Setting
1. Press the
2.
Press the ▲ or ▼ button to select "Sound Mode".
TOOLS button on the remote control.
3. Press the ◄ or ► button to select the desired sound mode.
4. Press the EXIT or TOOLS button to exit.
ENTER
button.
ENTER
TV
TV
Mode : Custom Equalizer SRS TS XT : Off Auto Volume : Off TV Speaker : On
Sound Select : Main
Move Enter Return
Anynet+ (HDMI-CEC) Picture Mode : Standard Sound Mode Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off Dual l-ll : Mono
Move Adjust Exit
Sound
Tools
Equalizer: Balance/100Hz/300Hz/1kHz/3kHz/10kHz
The sound settings can be adjusted to suit your personal preferences.
If you make any changes to these settings, the sound mode
is automatically switched to "Custom".
TV
R
L
Balance 100Hz 300Hz 1kHz 3kHz 10kHz
Equalizer
Move Adjust Return
SRS TS XT: Off/On
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.
Easy Setting
1. Press the
2.
Press the ▲ or ▼ button to select “SRS TS XT”.
TOOLS button on the remote control.
3. Press the ◄ or ► button to select the "Off" or "On".
4. Press the EXIT or TOOLS button to exit.
Anynet+ (HDMI-CEC) Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT Off Energy Saving : Off Dual l-ll : Mono
Move Adjust Exit
Tools
TruSurround XT, SRS and Symbol are trademarks of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs,
Inc.
Auto Volume: Off/On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the
desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
English - 23
TV Speaker: Off/On
If you want to hear the sound through separate speakers, cancel the internal amplifier.
The
➣ ➣
+, - and MUTE buttons do not operate when the "TV Speaker" is set to "Off".
When “TV Speaker” is set to “Off”, you can operate only “Sound Select” (in PIP mode) in Sound
menu.
Sound Select: Main/Sub
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
Main: Used to listen to the sound of the main picture.
Sub: Used to listen to the sound of the sub picture.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Selecting the Sound Mode

You can set the sound mode in the "Tools" menu. When you set to "Dual I-II", the current sound mode is displayed on the screen.
Press the TOOLS button on the remote control.
1.
2.
Press the ▲ or ▼ button to select “Dual I-II".
3. Press the ◄ or ► button to select required option.
4. Press the
Stereo
NICAM Stereo
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
This function is only activated in stereo sound signal. It is deactivated in mono sound signal.
This function is only available in Analogue TV mode.
A2
ENTER
button.
Audio Type Dual
Mono MONO
Stereo STEREO
Dual DUAL
Mono MONO
Stereo MONO
Dual
MONO
1 ↔
DUAL
1/2
MONO
DUAL
2
STEREO
DUAL
1
2
Default
Automatic
change
DUAL 1
Automatic
change
DUAL 1
Anynet+ (HDMI-CEC) Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off Dual l-ll Mono
Move Adjust Exit
Tools

Connecting Headphones (Sold separately)

You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room.
When you insert the head set jack into the corresponding port, you can operate only "Auto Volume" and "Sound Select"(in PIP mode) in Sound menu.
Prolonged use of headphones at a high volume may damage your hearing.
You will not receive sound from the speakers when you connect headphones to the system.
The headphone volume and TV volume are adjusted differently.
English - 24
TV Side Panel

Setting and Displaying the Current Time

You can set the TV’s clock so that the current time is displayed when you press the INFO button. You must also set the time if you wish to use the automatic On/Off timers.
Press the MENU button to display the menu.
1.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER
button.
2. Press the ▲ or ▼ button to select "Time", then press the ENTER
3. Press the
4.
To... Press the....
Move to "Month", "Day", "Year", "Hour" or "Minute"
Set the "Month", "Day", "Year", "Hour" or "Minute"
Conrm the setting
button.
ENTER
button to select "Clock Set".
◄ or ► button.
▲ or ▼ button.
ENTER
button
5. Press the EXIT button to exit. The current time will appear every time you press the INFO button.
➣ ➣
You can also set "Year", "Month", "Day", "Hour" and "Minute" by pressing the number buttons on the remote control.
If you disconnect the power cord, you have to set the clock again.
Mode : Custom
TV
Equalizer Plug & Play
SRS TS XT : Off Language : English Auto Volume : Off Time Internal Mute : Off
Light Effect : Reset
Auto Wall-Mount
Melody : Off Entertainment : Off Energy Saving : Off
PIP
Move Enter Return
Move Enter Return
TV
Move Adjust Return
Clock Set
Month
p
01
q
Hour00Minute
00
Setup
In Watching TV
Day
01

Setting the Sleep Timer

You can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode.
Press the MENU button to display the menu.
1.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER
button.
2. Press the ▲ or ▼ button to select "Time", then press the ENTER
button.
3. Press the ▲ or ▼ button to select "Sleep Timer", then press
the
ENTER
button.
4. Press the ▲ or ▼ button repeatedly until the desired time
appears (Off, 30, 60, 90, 120, 150, 180). Press the
ENTER
button.
5. Press the EXIT button to exit. The TV automatically switches to standby mode when the
timer reaches 0.
Easy Setting
1.
Press the TOOLS button on the remote control.
2.
Press the ▲ or ▼ button to select “Sleep Timer”.
3. Press the ◄ or ► button to select the minute.
4. Press the EXIT or TOOLS button to exit.
Mode : Custom
TV
Equalizer Plug & Play
SRS TS XT : Off Language : English Auto Volume : Off Time Internal Mute : Off
Light Effect : Reset
Auto Wall-Mount
Melody : Off Entertainment : Off Energy Saving : Off
PIP
Move Enter Return
TV
Clock Set : 00:00
Sleep Timer :
Timer 1 : Timer 2 : Timer 3 :
Move Enter Return
Anynet+ (HDMI-CEC) Picture Mode : Standard Sound Mode : Custom Sleep Timer Off SRS TS XT : Off Energy Saving : Off Dual l-ll : Mono
Move Adjust Exit
Setup
In Watching TV
Move Enter Return
Time
Tools
Off
120 150 180
Year
2008
30 60 90
English - 25

Switching the Television On and Off Automatically

:
:
Once
00
00
Setup
In Watching TV
Timer 1
Off
Off
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER
button.
2. Press the ▲ or ▼ button to select "Time", then press the ENTER
button.
3. Press the ▲ or ▼ button to select "Timer 1", "Timer 2",
"Timer 3", then press the
ENTER
button. Three different On/Off Timer Settings can be made. You must set the clock first.
4. Press the ◄ or ► button to select the required item below.
Press the ▲ or ▼ button to adjust to the setting satised.
On Time : Select hour, minute and "On"/"Off".
(To activate timer with the setting satised, set to "On".)
Off Time : Select hour, minute and "On"/"Off".
(To activate timer with the setting satised, set to "On".)
Volume : Select the desired turn on volume level.
Repeat : Select "Once", "Everyday", "Mon~Fri", "Mon~Sat" or "Sat~Sun".
You can set the hour and minute directly by pressing the number buttons on the remote control.
Auto Power Off
TV
Plug & Play Language : English Time Light Effect :
Auto Wall-Mount
Melody : Off Entertainment : Off Energy Saving : Off
PIP
Move Enter Return
TV
On Time
5
00
6
Off Time
00
Volume
10
Repeat
► Move Adjust Return
When you set the timer On, the TV will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is on for too long time.

Choosing Your Language

When you start using your set for the first time, you must select the language which will be used for displaying menus and indications.
Press the MENU button to display the on-screen menu.
1.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER
button.
2. Press the ▲ or ▼ button to select "Language", then press
the
ENTER
button.
3. Select a particular language by pressing the ▲ or ▼ button
repeatedly. Press the
ENTER
button.
4. Press the EXIT button to exit.
TV
Plug & Play Language : English Time Light Effect :
Auto Wall-Mount
Melody : Off Entertainment : Off Energy Saving : Off
PIP
Move Enter Return
Setup
In Watching TV
English - 26

Setting the Light Effect (depending on the model)

You can turn on/off the LED on the front of TV according to the situation. Use it for saving power or when the LED dazzles your eyes.
Press the MENU button to display the on-screen menu.
1.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER
button.
2. Press the ▲ or ▼ button to select "Light Effect", then press the ENTER
button.
3. Press the ▲ or ▼ button to select "Off", "In Standby", "In Watching TV" or "Always".
Press the
ENTER
Off: LED will not come on.
In Standby: Turns the LED on in standby mode.
♦ ♦
In Watching TV: Turns the LED on while watching TV.
Always: LED is always on.
button.
Set the "Light Effect" to "Off" to reduce the power consumption.
4. Press the EXIT button to exit.
Mode : Custom
TV
Equalizer Plug & Play
SRS TS XT : Off Language : English Auto Volume : Off Time Internal Mute : Off
Light Effect : Reset
Auto Wall-Mount
Melody : Off Entertainment : Off Energy Saving : Off
PIP
Move Enter Return
Move Enter Return

Melody / Entertainment / Energy Saving

Mode : Custom
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER button.
2.
Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
3. When you are satised with your setting, press the ENTER
button.
4. Press the EXIT button to exit.
TV
Equalizer Plug & Play
SRS TS XT : Off Language : English Auto Volume : Off Time Internal Mute : Off
Light Effect : Reset
Auto Wall-Mount
Melody : Off Entertainment : Off Energy Saving : Off
PIP
Move Enter Return
Move Enter Return
Setup
In Watching TV
LED
Setup
In Watching TV
Melody: Off/Low/Medium/High
The TV power on/off melody sound can be adjusted.
The Melody does not play
− When no sound is output from the TV because the MUTE button has been pressed.
− When no sound is output from the TV because the - (Volume) button has been pressed.
− When the TV is turned off by the Sleep Timer function.
English - 27
Entertainment: Off/Sports/Cinema/Game
The “Entertainment” mode enables you to select the optimal display and sound for sports, cinema
and games.
Off: Switch the "Entertainment" function off.
Sports: Provides the optimal picture and sound quality for sports. You can enjoy more thrilling
Cinema: Provides the optimal picture and sound quality for cinema. You can experience a richer
Game: Provides the optimal picture and sound quality for games. This mode accelerates the
➣ ➣
You can press the E.MODE button on the remote control
Energy Saving: Off/Low/Medium/High/Auto
colour and sound.
picture and enhanced sound.
playing speed when using an external game console connected to the TV.
If you set any of the three “Entertainment” modes to On, the settings will be locked and can not be adjusted. If you want to make Picture and Sound mode adjustments, the “Entertainment” mode
must be turned off.
The “Entertainment” settings are saved for each input source. If you set any of the three “Entertainment” modes to On, the “SRS TS XT” function becomes
unavailable.
repeatedly to change the “Entertainment” setting.
This feature adjusts the screen brightness depending on the surrounding lighting conditions.
Off: Turns off the energy saving function.
Low: Sets the TV to low energy saving mode.
Medium: Sets the TV to medium energy saving mode.
High: Sets the TV to high energy saving mode.
Auto: Automatically adjusts the brightness of the TV screen in accordance with the scenes.
Easy Setting
1. Press the
2.
Press the ▲ or ▼ button to select “Energy Saving”.
TOOLS button on the remote control.
3. Press the ◄ or ► button to select the "Off", "Low", "Medium",
"High" or "Auto".
4. Press the EXIT or TOOLS button to exit.
Anynet+ (HDMI-CEC) Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving Off Dual l-ll : Mono
Move Adjust Exit
Tools
English - 28
Loading...
+ 327 hidden pages