SAMSUNG LE37A686M1F User Manual

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
AUSTRIA 0800-SAMSUNG (726-7864) www.samsung.com/at BELGIUM 0032 (0)2 201 24 18 www.samsung.com/be
CZECH REPUBLIC
DENMARK 70 70 19 70 www.samsung.com/dk EIRE 0818 717 100 www.samsung.com/ie FINLAND 030-6227 515 www.samsung.com/
FRANCE
GERMANY 01805 - SAMSUNG (726-7864) (€ 0,14/Min) www.samsung.com HUNGARY 06-80-SAMSUNG (726-7864) www.samsung.com ITALIA 800-SAMSUNG (726-7864) www.samsung.com LUXEMBURG 0035 (0)2 261 03 710 www.samsung.com/be NETHERLANDS 0900-SAMSUNG (726-7864) (€ 0,10/Min) www.samsung.com/nl NORWAY 815-56 480 www.samsung.com/no
POLAND
PORTUGAL 80820-SAMSUNG (726-7864) www.samsung.com/pt SLOVAKIA 0800-SAMSUNG (726-7864) www.samsung.com/sk SPAIN 902 10 11 30 www.samsung.com SWEDEN 0771-400 200 www.samsung.com/se SWITZERLAND 0800-SAMSUNG (726-7864) www.samsung.com/ch U.K 0845 SAMSUNG (7267864) www.samsung.com TURKEY 444 77 11 www.samsung.com ESTONIA 800-7267 www.samsung.ee LATVIA 800-7267 www.samsung.com/lv LITHUANIA 8-800-77777 www.samsung.lt KAZAHSTAN 8-10-800-500-55-500 www.samsung.kz KYRGYZSTAN 00-800-500-55-500 ­RUSSIA 8-800-555-55-55 www.samsung.ru TADJIKISTAN 8-10-800-500-55-500 ­UKRAINE 8-800-502-0000 www.samsung.com UZBEKISTAN 8-10-800-500-55-500 www.samsung.uz
Customer Care Centre
844 000 844 www.samsung.com/cz
Distributor pro Českou republiku: Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4
3260 SAMSUNG (€ 0,15/Min) 08 25 08 65 65 (€ 0,15/Min)
0 801 801 881 022-607-93-33
Web Site
www.samsung.com
www.samsung.com/pl
LCD TV
user manual
BN68-01684A-00
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at
www.samsung.com/global/register
Model Serial No.
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. (See back cover for more informations.)
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image
retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders
caused by the above effect are not covered by the Warranty.
Displaying still images from Video games and PC for longer than a certain period of time may produce
partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages
Contents
CONNECTING AND PREPARING YOUR TV
List of Parts ........................................................ 3
Installing the Wall Mount Kit ............................... 3
Viewing the Control Panel .................................. 4
Viewing the Connection Panel ........................... 5
Viewing the Remote Control ............................... 8
Installing Batteries in the Remote Control .......... 9
Switching On and Off ......................................... 9
Placing Your Television in Standby Mode........... 9
Viewing the Menus ........................................... 10
Using the TOOLS Button .................................. 10
Plug & Play ........................................................11
SETTING THE CHANNELS
Storing Channels Automatically ....................... 12
Storing Channels Manually .............................. 13
Adding / Locking Channels .............................. 14
Sorting the Stored Channels ............................ 15
Assigning Channels Names ............................. 15
Fine Tuning Channel Reception ....................... 16
LNA (Low Noise Amplier) ............................... 16
SETTING THE PICTURE
Changing the Picture Standard ........................ 17
Adjusting the Custom Picture ........................... 18
Conguring Detailed Settings on the Picture ... 18
Resetting the Picture Settings to the Factory
Defaults ............................................................ 19
Conguring Picture Option ............................... 20
Viewing the Picture In Picture (PIP) ................. 22
SETTING THE SOUND
Sound Features ................................................ 23
Selecting the Sound Mode ............................... 24
Connecting Headphones (Sold separately) ..... 24
FUNCTION DESCRIPTION
Choosing Your Language ................................. 26
Melody / Entertainment / Energy Saving ......... 27
Selecting the Source ........................................ 28
Editing the Input Source Names ...................... 29
USING THE DTV FEATURE
Previewing the DTV Menu System .................. 30
Updating the Channel List Automatically .......... 31
Updating the Channel List Manually ................ 31
Editing Your Favourite Channels ...................... 32
Selecting Channel List ..................................... 34
Displaying Programme Information .................. 34
Viewing the EPG (Electronic Programme Guide)
Information ....................................................... 35
Using the Scheduled List ................................. 36
Setting the Default Guide ................................. 36
Viewing All Channels and Favourite Channels 37
Adjusting the Menu Transparency .................... 37
Setting up the Parental Lock ............................ 38
Setting the Subtitle ........................................... 39
Setting the Subtitle Mode ................................. 39
Selecting the Audio Format .............................. 39
Selecting the Audio Description ....................... 40
Selecting the Digital Text (UK only) .................. 40
Selecting the Time Zone (Spain only) .............. 41
Viewing Product Information ............................ 41
Checking the Signal Information ...................... 42
Upgrading the Software ................................... 42
Viewing Common Interface .............................. 43
Selecting the CI (Common Interface) Menu ..... 43
Resetting .......................................................... 44
Selecting the Preferred Language
(Subtitle , Audio or Teletext) ............................. 44
Preference ........................................................ 45
English
SETTING THE TIME
Setting and Displaying the Current Time .......... 25
Setting the Sleep Timer .................................... 25
Switching the Television On and Off
Automatically .................................................... 26
English - 1
SETTING THE PC
Setting up Your PC Software
(Based on Windows XP) .................................. 46
Display Modes .................................................. 46
Setting up the TV with your PC ........................ 47
WISELINK
Using the WISELINK Function ......................... 48
Using the WISELINK Menu .............................. 49
Using the PHOTO (JPEG) List ......................... 50
Using the MP3 List ........................................... 53
Using the Setup Menu ...................................... 54
RECOMMENDATIONS FOR USE
Teletext Feature ............................................... 61
Auto Wall-Mount (Sold separately) ................... 63
Using the Anti-Theft Kensington Lock
(depending on the model) ................................ 64
Securing the TV to the Wall .............................. 65
Troubleshooting: Before Contacting Service
Personnel ......................................................... 66
Technical and Environmental Specications .... 67
ABOUT ANYNET
What is Anynet+? ............................................ 55
Connecting Anynet+ Devices ........................... 55
Setting Up Anynet+ .......................................... 56
Scanning and Switching between Anynet+
Devices ............................................................ 57
Recording ......................................................... 59
Listening through a Receiver ........................... 59
Check Points before Requesting Service ......... 60
+
Symbol Press Note One-Touch
English - 2
Button

List of Parts

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
Remote Control &
Batteries
(AAA x 2)
Owner’s Instructions
Warranty card / Safety Guide (Not available in all locations)
Power Cord Cover-Bottom Cleaning Cloth
Warranty card

Installing the Wall Mount Kit

Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.
Remove the stand and cover the bottom hole with a
cap and fasten with two screws.
Safety Guide
English - 3

Viewing the Control Panel

87654311 2
The product colour and shape may vary depending on the model.
Front Panel buttons Touch each button to operate.
Speakers
1
Remote Control Sensor
2
Aim the remote control towards this spot on the TV.
The location of the Remote Control Sensor
may be different depending on its model.
SOURCE
3
Toggles between all the available input sources (TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI1, HDMI2, HDMI3, HDMI4, DTV). In the on-screen menu, use this button as you use the
ENTER MENU
4
Press to see an on-screen menu of your TV’s features.
button on the remote control.
English - 4
5
6
7
8
Press to decrease or increase the volume. In the on-screen menu, use the buttons as
you use the ◄ and ► buttons on the remote
control.
Press to change channels. In the on-screen menu, use the buttons as you use the ▼ and ▲ buttons on the remote control. (Without the Remote Control, you can turn on the TV by using the Channel buttons.)
Power Indicator
Blinks and turns off when the power is on and lights up in stand-by mode.
(Power)
Press to turn the TV on and off.

Viewing the Connection Panel

1 2 3 4 5
[Side Panel Jacks]
6
3
7
8
Power Input
The product colour and shape may vary depending on the model.
Whenever you connect an external device to your TV, make sure that power on the unit is turned off
When connecting an external device, match the colour of the connection terminal to the cable.
1 PC IN [PC] / [AUDIO]
Connect to the video and audio output jack on your PC.
-
2 COMPONENT IN
Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of
-
your set and the other ends to corresponding component video out connectors on the DTV or DVD. If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box
-
to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("PR", "PB", "Y") on your set. The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y,
-
B-Y and R-Y or Y, Cb and Cr. Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to
-
corresponding audio out connectors on the DTV or DVD.
3 HDMI IN 1, HDMI IN 2, HDMI IN 3, HDMI IN 4
Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)
-
No additional Audio connection is needed for an HDMI to HDMI connection.
-
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
-
!@#
0
9
English - 5
What is HDMI?
“High Denition Multimedia interface” allows the transmission of high denition digital video data
-
and multiple channels of digital audio. The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate
-
cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.
The TV may not output sound and pictures may be displayed with abnormal colour when DVD
players/Cable Boxes/Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-L] jacks on the back of the TV. If this happens, contact the company that provided the DVD player/Cable Box/Satellite
receiver to conrm the HDMI version, then request a rmware update. HDMI cables that are not
1.3 may cause annoying icker or no screen display.
DVI IN(HDMI2) [R-AUDIO-L]
DVI audio outputs for external devices.
-
Supported modes for HDMI/DVI and Component
HDMI/DVI 50Hz X X X O O O O HDMI/DVI 60Hz X O X X O O O
Component O O O O O O O
4 ANT IN
To view television channels correctly, a signal must be received by the set from one of the following sources:
An outdoor aerial / A cable television network / A satellite network
-
5 SERVICE
Connector for SERVICE only.
-
Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV
-
viewing angle using your remote control.
6 COMMON INTERFACE Slot
When not inserting "CI CARD" in some channels,"Scrambled Signal" is displayed on the screen.
-
The pairing information containing a telephone number, CI CARD ID, Host ID and other information
-
will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.
When the channel information conguration has nished, the message "Updating Completed" is
-
displayed, indicating that the channel list is now updated.
You must obtain a CI CARD from a local cable service
provider. Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD may cause damage to it. Insert the CI-Card in the direction marked on it.
The place of the COMMON INTERFACE Slot may be
different depending on its model.
7 WISELINK
Connect a USB mass storage device to view photo les (JPEG) and play audio les (MP3)
-
480i 480p 576i 576p 720p 1080i 1080p
English - 6
8 S-VIDEO or VIDEO / R-AUDIO-L
Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or
-
Camcorder. Connect RCA audio cables to "R-AUDIO-L" on your set and the other ends to corresponding audio
-
out connectors on the A/V device.
9 HEADPHONES JACK
Headphone may be connected to the headphone output on your set. While the head phone is
-
connected, the sound from the built-in speakers will be disabled.
0 AUDIO OUT [R-AUDIO-L]
Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to
-
corresponding audio in connectors on the Amplier or DVD Home Theatre.
! DIGITAL AUDIO OUT (OPTICAL)
Connect to a Digital Audio Component.
-
When the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the TV
outputs 2 channel audio only. If you want to hear 5.1 channel audio, connect the Optical jack on
the DVD player or Cable/Satellite Box directly to an Amplier or Home Theater, not the TV.
@ EXT 1, EXT 2
Connector
EXT 1 O O O Only TV or DTV output is available. EXT 2 O O Output you can choose.
Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
-
Video Audio (L/R) RGB Video + Audio (L/R)
Input Output
# Kensington Lock (depending on the model)
The Kensington Lock (optional) is a device used to physically x the system when used in a public
-
place.
If you want to use a locking device, contact the dealer where you purchased the TV.
-
The location of the kensington lock may be different depending on its model.
-
English - 7

Viewing the Remote Control

1 Television Standby button 2 Selects the TV and DTV
mode directly 3 Number buttons for direct
channel access
4 One/Two-digit channel
selection
5 + : Volume increase – : Volume decrease
6 Available source selection 7 Electronic Program Guide
(EPG) display
8 Use to quickly select
frequently used functions.
9 Use to see information on
the current broadcast
0 Colour buttons :
Use these buttons in the Channel list and WISELINK, etc.
@ Press to select the optional
display and sound modes for sports, cinema and games.
# Use these buttons in
the DMA, WISELINK and Anynet+. ( : This remote can be used to control recording on Samsung recorders with the Anynet+ feature)
$
Press to backlight the buttons on the remote. This function is convenient for using at night or when the room is dark. (Using the remote control with the
ON/OFF button set to
On will reduce the battery usage time.)
%
Previous channel
^ Temporary sound switch-
off
& P : Next channel P : Previous channel * Displays the main on-
screen menu
( This function enables you
to view and play photo and music files from an external device.
) Returns to the previous
menu
a Control the cursor in the
menu
b Exit the on-screen menu c Use this when connecting
a SAMSUNG DMA (Digital Media Adapter) device through an HDMI interface and switching to DMA mode. (The DMA button is optional.) For more information on the operating procedures, refer to the user manual of the DMA. This button is available when “Anynet+(HDMI-CEC)" is
“On” (see page 56)
d Picture size selection e Digital subtitle display f Displays "Channel List"
on the screen.
Teletext Functions
2 Exit from the teletext display 6 Teletext mode selection
(LIST/FLOF)
7
Teletext store
8
Teletext size selection
9
Teletext reveal
0
Fastext topic selection
! Alternately select Teletext, Double, or Mix.
%
Teletext sub page
&
P : Teletext next page
P :
* Teletext index ) b
Teletext previous page
Teletext hold Teletext cancel
The performance of the remote control may be affected by bright light.
English - 8

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the gure.
2. Install two AAA size batteries.
Make sure to match the "+" and "–" ends of the batteries with the
diagram inside the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be
using the remote control for a long time. Using the remote control with the ON/OFF button set to On will
reduce the battery usage time.
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special uorescent light or neon sign nearby?

Switching On and Off

The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
The standby indicator lights up
2. Press the P button You also can press the POWER button or the TV/DTV button on the remote control to turn
the TV on. The programme that you were watching last is reselected automatically.
3. Press the numeric button (0~9) or channel up/down (
button
on your set.
When you switch the set on for the very rst time, you will be asked to choose language in which the
menus are to be displayed.
4. To switch your set off, press the POWER button again.
on your set.
on your set.
/
) button on the remote control or

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWER button on the remote control.
The screen is turned off and a red standby indicator appears on your set.
2. To switch your set back on, simply press the POWER , numeric buttons (0~9), TV/DTV button or
channel up/down (
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for
example). It is best to unplug the set from the mains and aerial.
/
) button again.
English - 9

Viewing the Menus

1. With the power on, press the MENU button.
The main menu appears on the screen. The menu’ s left side
has icons: Picture, Sound, Channel, Setup, Input, Digital Menu.
2. Press the ▲ or ▼ button to select one of the icons.
Then press the
ENTER
button to access the icon’s sub-
menu.
3. Press the EXIT The on-screen menus disappear from the screen after
button to exit.
about one minute.

Using the TOOLS Button

You can use the TOOLS button to select your frequently used functions quickly and easily. The “Tools” menu change depending on which external input mode you are viewing.
1. Press the TOOLS button.
The “Tools” menu will appear.
2. Press the ▲ or ▼ button to select a menu.
3. Press the ▲/▼/◄/►/
use the selected items. For a more detailed description of each function, refer to the corresponding page.
Anynet+ (HDMI-CEC), see page 56
Picture Mode, see page 17
Sound Mode, see page 23
Sleep Timer, see page 25
SRS TS XT, see page 23
Energy Saving, see page 28
Dual l-ll, see page 24
PIP, see page 22
Auto Adjustment, see page 47
ENTER
buttons to display, change, or
TV
Mode : Standard Backlight 7 Contrast Brightness Sharpness 50 Colour 50
Tint G50 R50
Detailed Settings sMore
Move Enter Return
Anynet+ (HDMI-CEC) Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off Dual l-ll : Mono
Move Enter
Picture
Tools
95 45
e
Exit
English - 10

Plug & Play

When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available.
Any functions related to Digital TV (DVB) will only work in
countries or areas where DVB-T (MPEG2) digital terrestrial
signals are broadcasted. Please conrm with your local dealer
if you can receive DVB-T signals. Although this TV set follows
the DVB-T specication, maintaining compatibility with the future
coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not be available in some countries.
1. Press the POWER button on the remote control.
The message "Start Plug & Play" is displayed with "OK" selected.
2. Select the appropriate language by pressing the ▲ or ▼ button.
Press the
3. Press the
➣ ➣
4. The message "Check antenna input." is displayed with "OK" selected.
Press the
5. Select the appropriate country by pressing the
Press the
6. The message “Some DTV functions may not be available. Digital Scan?” is displayed.
Press the ◄ or ► button to select “Yes” or “No”, then press the
♦ ♦
7.
The "Auto Store" menu is displayed with the "Start" selected. Press the
➣ ➣
8. Press the
Select the "Month", "Day", "Year", "Hour", or "Minute" by pressing the ◄ or ► button. Set the "Month", "Day", "Year", "Hour", or "Minute" by pressing the ▲ or ▼ button.
ENTER
We recommend setting the TV to "Home Use" mode for the best picture in your home environment. "Store Demo" mode is only intended for use in retail environments.
If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use”
(Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
ENTER
Please check that the antenna cable is connected correctly.
ENTER
Yes: First an ATV search is performed and then a DTV ch. auto search is performed. No: Only an ATV search is performed.
This function is supported for all countries except for the following countries: France, Germany, Italy, Netherlands, Spain, Switzerland, United Kingdom, Austria.
The channel search will start and end automatically. The DTV channel scan menu appears and the DTV channel is automatically updated. If the DTV channel is updated, the Source in the source list of the Input menu is automatically changed to DTV.
Press the For detailed descriptions about DTV channel update, refer to page 31 of this manual. After all the available digital channels are stored, the screen to select a time zone is displayed depending on the country.
ENTER
You can also set the “Month”, “Day”, “Year”, “Hour” and "Minute" by pressing the number buttons
on the remote control.
button to conrm your choice.
or ► button to select “Store Demo” or “Home Use”, then the
button.
button to conrm your choice.
After all the available channels are stored, the "Clock Set" menu appears.
ENTER
button at any time to interrupt the memorization process.
button.
or ▼ button.
ENTER
ENTER
Enter
ENTER
Plug & Play
Start Plug & Play.
OK
button.
button.
button.
English - 11
9. Press the
When you have nished, press the
ENTER
Even if the
button to conrm your setting. The message “Enjoy your viewing” is displayed.
ENTER
ENTER
button is not pressed, the message will automatically disappear after
button.
several seconds.
Language: Select your language.
Country: Select your country.
Auto Store: Automatically scans for and stores channels available in the local area.
Clock Set: Sets the current time for the TV clock.
If you want to reset this feature...
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER
2.
Press the
button.
ENTER
button again, to select "Plug & Play".
For further details on setting up options, refer to the page 11.
The “Plug & Play” feature is only available in the TV mode.
TV
Plug & Play Language : English Time
Auto Wall-Mount
Melody : Off Entertainment : Off Energy Saving : Off
PIP
Move Enter Return
Start Plug & Play.
Enter Return
Setup
Plug & Play
OK
Enter Return
  
  

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
2. Press the
3. Select the appropriate country by pressing the
Press the
button.
ENTER
button to select "Country".
▲ or ▼ button.
ENTER
button to conrm your choice.
Even though you have changed the country setting in this menu, the country setting for DTV is not changed.
TV
Country : Auto Store Manual Store Channel Manager Sort Name Fine Tune LNA : Off
Move Enter Return
(Refer to page 31)
4. Press the
5. Press the
➣ ➣
▲ or ▼ button to select "Auto Store", then press the
ENTER
button.
ENTER
The TV will begin memorizing all of the available channels. Press the
ENTER
button at any time to interrupt the memorization process and return to the
button.
"Channel" menu.
6. After all the available channels are stored, the "Sort" menu appears. (Refer to page 15)
Channel
United Kingdom 
English - 12

Storing Channels Manually

Not available in DTV or external input mode.
You can store television channels, including those received via cable networks. When storing channels manually, you can choose:
♦ Whether or not to store each of the channels found. ♦ The programme number of each stored channel which you
TV
Country : Auto Store Manual Store Channel Manager Sort Name Fine Tune LNA : Off
wish to identify.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
button.
2. Press the ▲ or ▼ button to select "Manual Store", then press
the
ENTER
button.
3. Select the required option by pressing the ▲ or ▼ button, then
press the
4. When you are satised with your setting, press the ENTER
5. Press the EXIT
Programme (Programme number to be assigned to a channel)
-
Colour System: Auto/PAL/SECAM/NTSC4.43
-
Sound System: BG/DK/I/L
­Channel (When you know the number of the channel to be stored)
-
-
➣ ➣
Search (When you do not know the channel numbers)
-
-
ENTER
button.
button.
button to exit.
Press the ▲ or ▼ button until you nd the correct number.
You can also select the channel number directly by pressing the numeric buttons (0~9).
Press the ▲ or ▼ button to select the required colour standard.
Press the ▲ or ▼ button to select the required sound standard.
Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel). Press the ► button, then press the ▲ or ▼ button to select the required number.
You can also select the channel number directly by pressing the numeric buttons (0~9). If there is abnormal sound or no sound, re-select the sound standard required.
Press the ▲ or ▼ button to start the search. The tuner scans the frequency range until the rst channel or the channel that you selected is
Move Enter Return
Move Enter Return
TV
Programme : P 2 Colour System : Auto Sound System : BG Channel : C 3 Search : 77 MHz Store : ?
Move Enter Return
received on the screen.
Store (When you store the channel and associated programme number)
Set to "OK" by pressing the
­Channel mode
P (Programme mode): When completing tuning, the broadcasting stations in your area have been
-
ENTER
button.
assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode.
C (Air channel mode): You can select a channel by entering the assigned number to each air
-
broadcasting station in this mode.
S (Cable channel mode): You can select a channel by entering the assigned number for each cable
-
channel in this mode.
Channel
United Kingdom 
Manual Store
English - 13

Adding / Locking Channels

Not available in DTV or external input mode.
Using the Channel Manager, you can conveniently lock or add channels.
1. Press the MENU button to display the menu.
Press the or button to select "Channel", then press the
ENTER
2. Press the or button to select "Channel Manager", then
press the
Adding channels
Using the Channel List, you can add channels.
3. Select Channel List by pressing the
4. Move to the (
button, select a channel to be added, and press the
ENTER
button.
ENTER
button.
ENTER
button.
) eld by pressing the ▲, ▼, ◄ or ►
button to add the channel.
If you press the
ENTER
button again, the ( ) symbol next to the channel disappears and the channel is not added. " " is active when "Child Lock" is selected to "On".
TV
Country : Auto Store Manual Store Channel Manager Sort Name Fine Tune LNA : Off
Move Enter Return
TV
Channel List Child Lock : Off
Move Enter Return
Channel
Channel Manager
United Kingdom 
♦ Locking channels
This feature allows you to prevent unauthorized users, such as
children, from watching unsuitable programmes by muting out video and audio.
5. Press the ▲ or ▼ button to select "Child Lock", then press the ENTER
button.
6. Select "On" by pressing the ▲ or ▼ button, then press the ENTER
button.
7. Press the ▲ or ▼ button to select "Channel List", then press
the
ENTER
8. Move to the "
select a channel to be locked, and press the
button.
" eld by pressing the ▲, ▼, ◄ or ► button,
ENTER
button.
If you press the
ENTER
button again, the ( ) symbol next to the channel disappears and the channel lock is cancelled. A blue screen is displayed when "Child Lock" is activated.
9. Press the EXIT
Select "On" or "Off" in "Child Lock" to easily turn the
button to exit.
channels which selected on " " to be active or inactive.
You can select these options by simply pressing the CH LIST
button on the remote control.
Channel List
P 1 C3
1 / 10 Prog. 0 C-­1 C3 2 BBC 1 3 C74 4 C75 5 C76 6 S3 7 S4 8 S6 9 S7
Add Lock
Move Enter
Page Return
English - 14

Sorting the Stored Channels

This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store.
Not available in DTV or external input mode.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
button.
2. Press the ▲ or ▼ button to select "Sort", then press the ENTER
button.
3. Select the channel number that you wish to change by pressing the ▲ or ▼ button. Press the
ENTER
button. The selected channel number and name are moved to right side.
4. Select the number of the programme to which the channel is to
be moved by pressing the ▲ or ▼ button.
5. Press the
ENTER
button.
The channel is moved to its new position and all other channels are shifted accordingly.
6. Repeat steps
7. Press the EXIT
3 to 5 for another channel to be sorted.
button to exit.
TV
Country : Auto Store Manual Store Channel Manager Sort Name Fine Tune LNA : Off
Move Enter Return
TV
Prog. Ch. Name 0 C--
1 C23
2 C16 3 C3 4 S1
Move Enter Return

Assigning Channels Names

Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names.
Not available in DTV or external input mode.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
button.
2. Press the ▲ or ▼ button to select "Name", then press the ENTER
3. If necessary, select the channel to be assigned to a new
name by pressing the ▲ or ▼ button. Press the
button.
ENTER
button
The selection bar is displayed around the name box.
4.
To... Then...
Select a letter, number or symbol Press the ▲ or ▼ button Move on the next letter Press the ► button Move back the previous letter Press the ◄ button
Conrm the name
The following characters are available: Letters of the alphabet (A~Z) / Numbers (0~9) / Special
Press the
ENTER
button
characters (+, -, *, /, space)
5. Repeat steps
6. Press the EXIT
3 to 4 for each channel to be assigned to a new name.
button to exit.
TV
Country : Auto Store Manual Store Channel Manager Sort Name Fine Tune LNA : Off
Move Enter Return
TV
Prog. Ch. Name 0 C-- -----
1 C23 -----
2 C16 ----­3 C3 4 S1
Move Enter Return
Channel
United Kingdom 
Sort
Channel
United Kingdom 
Name
-----
-----
English - 15

Fine Tuning Channel Reception

Use fine tuning to manually adjust a particular channel for optimal reception.
Not available in DTV or external input mode.
1. Use the number buttons to directly select the channel that
you want to ne tune.
2. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the
ENTER
3. Press the
the
4. Press the Press the
5. Press the EXIT Fine tuned channels that have been saved are marked with
button.
▲ or ▼ button to select "Fine Tune", then press
ENTER
button.
◄ or ► button to adjust the ne tuning.
ENTER
button.
button to exit.
an asterisk "*" on the right-hand side of the channel number in the channel banner. And the channel number turns red.
To reset the ne-tuning, select "Reset" by pressing the ▲ or ▼
button and then press the
ENTER
button.
LNA (Low Noise Amplier)
If the TV is operating in a weak-signal area, the LNA function
can improve the reception (a low-noise preamplier boosts the
incoming signal).
Not available in DTV or external input mode.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
button.
2. Press the ▲ or ▼ button to select "LNA", then press the ENTER
button.
3. Press the ▲ or ▼ button to select "Off" or "On". Press the ENTER
4. Press the EXIT
button.
button to exit.
Fine Tune
Reset
Channel
United Kingdom 
Channel
United Kingdom 
Channel
United Kingdom
TV
Country : Auto Store Manual Store Channel Manager Sort Name Fine Tune LNA : Off
Move Enter Return
P 1
Adjust Save Return
TV
Country : Auto Store Manual Store Channel Manager Sort Name Fine Tune LNA : Off
Move Enter Return
TV
Country : Auto Store Manual Store Channel Manager Sort Name Fine Tune
LNA : Off
Move Enter Return
0
Off
On
English - 16

Changing the Picture Standard

You can select the type of picture which best corresponds to your viewing requirements.
1. Press the MENU button to display the menu.
Press the
2. Press the
3. Press the ▲ or ▼ button to select the desired picture effect.
Press the
4. Press the EXIT
The Picture mode must be adjusted separately for each input
source.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “Picture Mode”.
3. Press the ◄ or ► button to select the desired picture mode.
4. Press the EXIT
ENTER ENTER
ENTER
button, to select "Picture". button again, to select "Mode".
button.
button to exit.
Dynamic: Selects the picture for high-definition in a bright room.
Standard: Selects the picture for optimum display in a normal environment.
Movie: Selects the picture for comfortable display in a dark room.
or TOOLS button to exit.
TV
Mode : Standard Backlight 7 Contrast Brightness Sharpness 50 Colour 50
Tint G50 R50
Detailed Settings sMore
Move Enter Return
TV
Mode : Standard
Backlight Contrast Brightness Sharpness 50 Colour 50
Tint G50 R50
Detailed Settings sMore
Move Enter Return
Anynet+ (HDMI-CEC) Picture Mode Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off Dual l-ll : Mono
Move Adjust
Picture
Picture
Tools
Standard
Dynamic
Standard
Movie
95 45
7 95 45
e
Exit
English - 17

Adjusting the Custom Picture

Your set has several settings which allow you to control picture quality.
1. To select the desired picture effect, follow the "Changing the
Picture Standard" instructions number 1 to 3. (On page 17).
2. Press the ▲ or ▼ button to select a particular item. Press the ENTER
button.
3. Press the ◄ or ► button to decrease or increase the value of a
particular item. Press the
4. Press the EXIT
Backlight: Adjusts the screen brightness by adjusting the LCD
button to exit.
ENTER
button.
backlight brightness. (0~10)
Contrast: Adjusts the lightness and darkness between objects and the background.
Brightness: Sharpness: Adjusts the outline of objects to either sharpen them
Adjusts the brightness of the whole screen.
or make them more dull. Colour: Adjusts the colours, making them lighter or darker.
Adjusts the colour of objects, making them more red or
Tint:
green for a more natural look.
The adjusted values are stored according to the selected Picture mode.
In PC mode, you can only make changes to "Backlight”, “Contrast" and “Brightness”.
In Analogue TV, Ext., AV, S-Video modes of the PAL system, you cannot use the "Tint" Function.
You can return to the factory defaults picture settings by selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory Defaults" on page 19)
The energy consumed during use can be signicantly reduced if the level of brightness of the picture
is reduced, and then this will reduce the overall running cost.
TV
Mode : Standard Backlight 7 Contrast Brightness Sharpness 50 Colour 50
Tint G50 R50
Detailed Settings sMore
Move Enter Return
Backlight
Move Adjust Return
Picture
95 45
7
Conguring Detailed Settings on the Picture
You can set detailed picture settings.
Press the MENU button to display the menu.
1.
Press the
2.
Press the
ENTER ENTER
button, to select "Picture".
button to select “Mode”.
Press the ▲ or ▼ button to select “Standard” or “Movie”, then
press the
3.
Press the ▲ or ▼ button to select "Detailed Settings", then press
the
4.
Select the required option by pressing the ▲ or ▼ button, then
press the
5.
When you are satised with your setting, press the
ENTER
ENTER
button.
ENTER
button.
button.
ENTER
button.
6.
Press the EXIT button to exit. "Detailed Settings" is available in "Standard" or "Movie" mode.
In PC mode, you can only make changes to “Dynamic Contrast”,
“Gamma” and “White Balance” from among the “Detailed Settings” items.
Black Adjust: Off/Low/Medium/High
You can directly select the black level on the screen to adjust the screen depth.
Dynamic Contrast: Off/Low/Medium/High
You can adjust the screen contrast so that the optimal contrast is provided.
English - 18
TV
Mode : Standard Backlight 7 Contrast Brightness Sharpness 50 Colour 50
Tint G50 R50
Detailed Settings sMore
Move Enter Return
TV
Black Adjust : Off Dynamic Contrast Gamma : 0 Colour Space : Custom White Balance Flesh Tone : 0 Edge Enhancement
xvYCC
Move Enter Return
Picture
Detailed Settings
: Medium
: On
: Off
95 45
 
Gamma: -3 ~ +3
You can adjust the Primary Colour (Red, Green, Blue) Intensity.
Press the ◄ or ► button until you reach the optimal setting.
Colour Space: Auto/Native/Custom
Colour space is a colour matrix composed of "Red", "Green" and "Blue" colours. Select your favourite Colour space to experience the most natural Colour.
Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on
programme sources.
Native: Native Colour Space offers deep and rich colour tone. Custom: Adjusts the colour range to suit your preference.
Customizing the Colour Space
Colour: Red/Green/Blue/Yellow/Cyan/Magenta
Adjusts the Colour range to suit your preference.
“Colour” is available when “Colour Space” is set to “Custom”. Press the ▲ or ▼ button to select “Red”, “Green”, “Blue”, “Yellow”, “Cyan” or “Magenta”.
Press the ENTER button. Red/Green/Blue:
In “Colour”, you can adjust the RGB values for the selected colour.
Press the ▲ or ▼ button to select "Red", "Green" or "Blue" to change it.
Press the ENTER button.
Press the ◄ or ► button to decrease or increase the value of a particular item. Press the
ENTER button. Reset: Resets the colour space to the default values.
White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset
You can adjust the colour temperature for more natural picture colours.
R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain:
Changing the adjustment value will refresh the
adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the
ENTER
button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults. Flesh Tone: -15 ~ +15
You can emphasize the pink 'flesh tone' in the picture.
Press the ◄ or ► button until you reach the optimal setting.
Changing the adjustment value will refresh the adjusted screen.
Edge Enhancement: Off/On
You can emphasize object boundaries in the picture.
xvYCC: Off/On
Setting the xvYCC mode to On increases detail and colour space when watching movies from an external device (ie. DVD player) connected to the HDMI or Component IN jacks. You must set the Picture Mode to Movie to enjoy this feature.
Only available in "HDMI" and "Component" on "Movie" mode.
If xvYCC function is active, PIP cannot be selected.

Resetting the Picture Settings to the Factory Defaults

You can return to the factory defaults picture settings.
1. To select the desired picture effect, follow the "Changing the
Picture Standard" instructions number 1 to 3 (On page 17).
2. Press the ▲ or ▼ button to select "Reset", then press the ENTER
3.
Press the ▲ or ▼ button to select "OK" or "Cancel".
Press the
4. Press the EXIT The "Reset" will be set for each "Picture" mode.
button.
ENTER
button to exit.
button.
English - 19
TV
More Picture Options
Reset : OK
Move Enter Return
Picture
OK
Cancel
Loading...
+ 48 hidden pages