How it Works
Samsung
Loading...
LA52N81BD

Samsung LA52N81BD, LA40N81BD, LA46N81BD Owner's Instructions Manual

Owner’s Instructions
Register your product at www.samsung.com/global/register
Record your Model and Serial number here for future reference.
· Model __________ · Serial No. ____________
TFT-LCD TELEVISION
LA40N81BD LA46N81BD LA52N81BD LA40M86BD
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Country
Customer Care Center
Web Site
AUSTRALIA 1300 362 603 www.samsung.com/au
CHINA 800-810-5858, 010-6475 1880 www.samsung.com.cn
HONG KONG 3698 - 4698 www.samsung.com/hk
INDIA
3030 8282 1800 1100 11
www.samsung.com/in
INDONESIA 0800-112-8888 www.samsung.com/id
JAPAN 0120-327-527 www.samsung.com/jp
MALAYSIA 1800-88-9999 www.samsung.com/my
PHILIPPINES 1800-10-SAMSUNG (7267864) www.samsung.com/ph
SINGAPORE 1800-SAMSUNG (7267864) www.samsung.com/sg
THAILAND
1800-29-3232 02-689-3232
www.samsung.com/th
TAIWAN 0800-329-999 www.samsung.com/tw
VIETNAM 1 800 588 889 www.samsung.com/vn
SOUTH AFRICA 0860 7267864 (SAMSUNG) www.samsung.com/za
U.A.E
800SAMSUNG (7267864) 8000-4726
www.samsung.com/mea
BN68-01180F-01
ON-SCREEN MENUS
Picture In Picture (PIP)
Energy Saving
Dolby Digital
SRS TruSurround XT
Digital Natural Image engine
Cover.indd 1 2008-06-09 �� 2:34:02
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen
• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and
center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.
• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
Contents
English
English - 1
GENERAL INFORMATION
List of Features ............................................................................. 2
Accessories ..................................................................................2
Viewing the Control Panel ...........................................................3
Viewing the Connection Panel ....................................................4
Remote Control ............................................................................ 6
Installing Batteries in the Remote Control ....................................7
OPERATION
Turning the TV On and Off ...........................................................8
Plug & Play Feature .....................................................................8
Changing Channels ...................................................................... 9
Adjusting the Volume ..................................................................10
Viewing the Display ....................................................................10
Viewing the Menus .....................................................................10
Selecting a Menu Language ....................................................... 11
CHANNEL CONTROL
Memorizing the Channels ........................................................... 12
Storing Channels Manually ........................................................14
Viewing the EPG (Electronic Programme Guide) Information .... 15
Setting the Default Guide ........................................................... 16
Managing Channels ...................................................................17
Activating the Child Lock ............................................................24
Fine Tuning Analog Channels ....................................................24
Checking the Digital-Signal Strength .......................................... 25
LNA (Low Noise Amplier) .......................................................... 25
PICTURE CONTROL
Using Automatic Picture Settings ...............................................26
Adjusting the Backlight ...............................................................26
Adjusting the Custom Picture .....................................................27
Adjusting the Detailed Settings ..................................................27
Adjusting the Picture Options .....................................................30
Resetting the Picture Settings to the Factory Defaults ............... 33
SOUND CONTROL
Using Automatic Sound Settings ................................................ 34
Customizing the Sound .............................................................. 34
Setting the TruSurround XT ........................................................35
Setting the Audio Language .......................................................36
Selecting the Audio Format ........................................................36
Automatic Volume Control .......................................................... 37
Selecting the TV Speaker ........................................................... 37
Listening to the Sound of the Sub (PIP) Picture ......................... 38
Resetting the Sound Settings to the Factory Defaults ................ 38
Connecting Headphones (Sold separately) ................................ 38
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
TIME SETTING
Time Setting ............................................................................... 39
Setting the Subtitle ..................................................................... 42
Selecting a Preference Language ..............................................42
Setting the Light Effect
(LA40N81BD/LA46N81BD/LA52N81BD) ...................................43
Adjusting the TV On/Off Melody Sound......................................43
Using the Energy Saving Feature ..............................................44
Viewing Picture-in-Picture .......................................................... 44
Freezing the Picture ................................................................... 46
Upgrading the Software .............................................................. 47
To Select the Source ..................................................................48
To Edit the Input Source Name ..................................................48
Setting Up Your Remote Control ................................................49
Remote Control Codes ............................................................... 51
PC DISPLAY
Using Your TV as a Computer (PC) Display ............................... 54
Display Modes ............................................................................ 54
Setting up the TV with your PC .................................................. 55
ABOUT ANYNET
+
What is Anynet+? ......................................................................56
Connecting Anynet+ Devices ..................................................... 56
Setting Up Anynet
+
....................................................................
57
Scanning and Switching between Anynet+ Devices .................. 57
Recording ...................................................................................58
Listening through a Receiver (Home theater) ............................59
Troubleshooting for Anynet
+
......................................................
59
APPENDIX
Troubleshooting .......................................................................... 60
Installing the Stand ..................................................................... 62
Disconnecting the Stand ............................................................62
Auto Wall-Mount Adjustment (Sold separately) .......................... 63
Wall Mount Kit Specications (VESA) ........................................ 64
Using the Anti-Theft Kensington Lock ........................................ 65
Specications ............................................................................. 66
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Symbol Press Note One-Touch
Button
English - 2
Accessories
Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
Remote Control & Batteries (AAA x 2) Power Cord Cleaning Cloth
Cover-Bottom Owner’s Instructions
Warranty Card /
Safety Guide Manual
(Not available in all locations)
The items Colour and shape may vary depending on the model.
General Information
List of Features
Adjustable picture settings that can be stored in the TV’s memory. Automatic timer to turn the TV on and off. A special sleep timer. Excellent Digital Interface & Networking :
With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Cable Box/Satellite receiver
(Set-Top Box) needed.
HDMI/DVI connection of your PC to this TV. Remote Control
The supplied remote can be used to operate the TV as well as most DVD players, Cable Box/Satellite receiver (Set-Top Box) and VCRs. Excellent Picture Quality
- DNIe technology provides life-like clear images. SRS TruSurround XT
- SRS TruSurround XT provides a virtual Dolby surround system. Dobly Digital
- Manufactured under license from Dolby Laboratories."Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
English - 3
Viewing the Control Panel
The product color and shape may vary depending on the model.
1
SOURCE Toggles between all the available input sources (TV, AV1, AV2, S-Video, Component1, Component2,
PC, HDMI1, HDMI2/DVI, HDMI3).
In the on-screen menu, use this button as you would
use the ENTER/OK button on the remote control.
2
MENU Press to see an on-screen menu of your TV’s features.
3
- VOL + Press to increase or decrease the volume. In the on-screen menu, use the - VOL + buttons as you
would use the ◄ and ► buttons on the remote control.
4 CH
Press to change channels. In the on-screen menu, use the CH
buttons as you would use the ▼ and ▲ buttons on the remote control.
5
(POWER)
Press to turn the TV on and off.
Power Indicator Blinks and turns off when the power is on and lights up in
stand-by mode.
Remote Control Sensor Aim the remote control towards this spot on the TV.
6
SPEAKERS
LA40N81BD/LA46N81BD/LA52N81BD
LA40M86BD
English - 4
Viewing the Connection Panel
Rear Panel Jacks
Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players.
Whenever you connect an external device to your TV, make sure that power on the unit is turned off When connecting an external device, match the colour of the connection terminal to the cable.
1 Connecting External A/V Devices (AV IN 1)
Connect RCA or S-VIDEO to an appropriate external A/V device such as VCR, DVD or Camcorder. Connect RCA audio cables to "R - AUDIO - L” on the rear of your set and the other ends to corresponding audio out connectors on the A/V device. Headphone may be connected to the headphone output (!) on the rear of your set. While the head phone is connected, the sound from the built-in speakers will be disabled.
2 SERVICE1
Service connection for qualied service engineer.
3 Connecting AUDIO
Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio in
connectors on the Amplier or DVD Home Theater.
4 HDMI IN 1, HDMI IN 2, HDMI IN 3
Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players) No additional Audio connection is needed for an HDMI to HDMI connection.
What is HDMI?
“High Denition Multimedia interface” allows the transmission of high denition digital video data and multiple channels of
digital audio.
The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.
The TV may not output sound and pictures may be displayed with abnormal colour when DVD players/Cable Boxes/ Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-L] jacks on the back of the TV. If this happens,
contact the company that provided the DVD player/Cable Box/Satellite receiver to conrm the HDMI version, then request a rmware update. HDMI cables that are not 1.3 may cause annoying icker or no screen display.
If the quality of HDMI is not good,the image or sound may be abnormity.
➣ ➣
-
-
-
-
-
-
-
➣
-
-
➣
➣
[Side Panel Jacks]
The product color and shape may vary depending on the model.
English - 5
DVI IN(HDMI2) [R-AUDIO-L]
DVI audio outputs for external devices.
Supported modes for HDMI/DVI and Component
5 ANT 1 IN / ANT 2 IN
Connects to an antenna or cable TV system.
6 PC IN [PC] / [AUDIO]
Connect to the video and audio output jack on your PC.
7 DIGITAL AUDIO OUT (OPTICAL)
Connect to a Digital Audio Component.
When the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the TV outputs 2 channel audio only. If
you want to hear 5.1 channel audio, connect the Optical jack on the DVD player or Cable/Satellite Box directly to an Amplier
or Home Theater, not the TV.
8 COMPONENT IN
Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD. If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("PR", "PB", "Y") on your set. The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr. Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD.
9 POWER INPUT 0 Kensington Lock (depending on the model)
The Kensington lock (optional) is a device used to physically x the system when used in a public place.
If you want to use a locking device, contact the dealer where you purchased the TV. The place of the Kensington Lock may be different depending on its model.
@ UPGRADE PORT (SERVICE2)
Connector for software upgrades (see page 47).
-
➣
-
-
-
➣
-
-
-
-
-
-
-
­Supported modes for HDMI and Component
480i 480p 576i 576p 720p 1080i 1080p
HDMI 50Hz X X X O O O O
HDMI 60Hz X O X X O O O
Component O O O O O O O
English - 6
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly at the TV. You can also use your remote control to operate your VCR, DVD player or
Cable Box/Satellite receiver
(Set-Top Box).
This is a special remote control for the visually impaired and has Braille
points on the POWER, CH, VOL, STOP and PLAY/PAUSE buttons.
The performance of the remote control may be affected by bright light.
1
POWER Turns the TV on and off.
2
NUMERIC BUTTONS Press to change the channel.
3
-/--/---
One / Two / Three-digit channel selection.
4
CH LIST
Used to display Channel Lists on the screen.
5
ANTENNA
Press to select “AIR” or “CABLE”.
6
VCR/DVD Functions
- Rewind
- Stop
- Play/Pause
- Fast/Forward
7
Press to increase or decrease the volume.
8 (
MUTE)
Press to temporarily cut off the sound.
9
MENU
Displays the main on-screen menu.
0
RETURN
Returns to the previous menu.
!
P.SIZE
Picture size selection.
@
S.MODE
Press to select the sound mode.
#
GUIDE
Electronic Program Guide (EPG) display
$
DUAL Sound effect selection
%
SET Sets the remote to control your TV, VCR, Cable, DVD or Set-Top Box.
^
TV, DVD, STB, CABLE, VCR Press to operate your TV,DVD, STB, CABLE (box) or VCR (See pages 49-53)
&
Press to backlight the VOL, CH, and the active source button(TV, DVD, CABLE, STB, VCR) on the remote. This function is convenient for using the remote at night or when dark.
*
SOURCE Press to display all of the available video sources.
(
PRE-CH Tunes to the previous channel.
)
FAV.CH Press to switch to your favorite channels.
a
REC
This remote can be used to control recording on Samsung DVD recorders with the Anynet feature.
b
P / P
Press to change channels.
c
EXIT
Press to exit the menu.
d
UP▲ / DOWN▼ / LEFT◄
/
RIGHT►
/ ENTER/OK
Use to select on-screen menu items and change menu values.
e
INFO
Press to display information on the TV screen.
f
TOOLS/Anynet+
Runs the Anynet+ functions and sets up Anynet devices.
g
Colour buttons Press to add or delete channels and to store channels to the favorite channel list in the “Channel List” menu.
h
P.MODE
Press to select the picture mode.
i
PIP
Picture-in Picture ON/OFF.
j
SUBTITLE
Digital subtitle display
k
STILL
Press to stop the action during a par­ticular scene. Press again to resume normal video.
l
RESET
When your remote does not work, change the batteries and press the RESET button for 2-3 seconds before use.
English - 7
1. Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AAA size batteries.
Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries should last for about one year.)
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
Installing Batteries in the Remote Control
English - 8
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently:
1. Press the POWER button on the remote control. The message “當第一次設置電視或重置電視後執行即插即用功能，設置頻道，時鐘
和其他功能” is displayed.
2. Press the ENTER/OK button. The message"Select the OSD Language"is displayed Select the appropriate language by pressing the ▲ or ▼ buttons. Press the ENTER/OK button to confirm your choice.
3. The message “Select Home Use when installing this TV in your home.” is automatically displayed. Press the ◄ or ► button to select “Store Demo” or “Home Use”, then press the ENTER/OK button.
We recommend setting the TV to "Home Use" mode for the best picture in your home environment. "Store Demo" mode is only intended for use in retail environments. If the unit is accidentally set to "Store Demo" mode and you want to return to
"Home Use" (Dynamic) mode, press any Volume button and then hold down the MENU button for five seconds on the side panel of the TV.
4. The message “Select the antennas to perform Auto Store for.” is displayed. Press the ▲ or ▼ button to memorize the channels of the selected connection.
Press the ENTER/OK button to select “Start”. If the antenna is connected to ANT 1 IN (AIR), select “Air” and if it is connected
to ANT 2 IN (CABLE), select “Cable”.
If both ANT 1 IN (AIR) and ANT 2 IN (CABLE) are connected, select the
“Air + Cable”.
5. The TV will begin memorizing all of the available channels. After all the available channels are stored, the Auto Store menu reappears. Press the ENTER/OK button when channel memorization is complete. The message “Set the Clock mode.” is displayed.
To stop the search before it has finished, press the ENTER/OK button with "Stop" selected.
6. Press the ENTER/OK button. Press the ▲ or ▼ button to select "Auto", then Press the ENTER/OK button.
If you select “Manual”, “Set Clock Mode.” is displayed. (See page 39)
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
Operation
Plug & Play
Select "Home Use" when installing this TV in your home
Home Use
Store Demo
EnterMove
Plug & Play
Auto store in progress. Cable 59 Air Digital : -- Cable Digital : -­ Analog : -- Analog : --
Stop
SkipEnter
3%
Plug & Play
Auto store is completed. 3 channels are memorized. Air : 1 Cable : 2
OK
SkipEnter
Plug & Play
Set the Clock Mode.
Clock Mode : Auto
Auto
Manual
EnterMove
Plug & Play
Menu language :
English
中文
EnterMove
Selected the OSD Language.
Plug & Play
Select the antenna to perform Auto store for.
Air
Cable
Air + Cable
Start
Start
Enter
Start
即插即用
當第一次設置電視或重置電視後執行即插即用功能，設置頻 道，時鐘和其他功能
確定
進入
Move
Skip
English - 9
7. The message “Enjoy your viewing.” is displayed. When you have finished, press the ENTER/OK button.
If you want to reset this feature...
1. Press the MENU
button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
2. Press the ENTER/OK button again, to select "Plug & Play".
Plug & Play
Enjoy your viewing.
OK
Setup
Plug & Play ►
Language : English Time Subtitle Preference Light Effect : Viewing Mode On Wall-Mount Adjustment Melody : High
Changing Channels
1. Press the P or P button to change channels.
When you press the P or P
button, the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels). You will not see channels that were either erased or not memorized. See page 12 to memorize channels.
Using the Channel Buttons
1. Press the number buttons to go directly to a channel. For example, to select
channel 27, press 2, then 7.
Using the Number Buttons
English - 10
Adjusting the Volume
Using the Volume Buttons
1. Press the
VOL or VOL button to decrease or increase the volume.
Using the MUTE button
At any time, you can cut off the sound using the MUTE button.
1. Press MUTE button and the sound cuts off. The " " is displayed on the screen.
2. To turn mute off, press the MUTE button again or simply press the
VOL or VOL button.
1. Press the PRE-CH button. The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one channel, then use the number button to select the second channel. Then use the PRE-CH button to quickly alternate between them.
Using the PRE-CH Button to select the Previous Channel
Viewing the Display
1. Press the INFO button on the remote control.
Press the INFO button once more or wait approximately 10 seconds and the display disappears automatically.
The display identies the current channel and the status of certain audio-video settings.
Viewing the Menus
1. With the power on, press the MENU button. The main menu appears on the screen. The menu’s left side has icons: Picture, Sound, Channel, Setup, Input, Application.
2. Use the ▲ or ▼ button to select one of the icons. Then press the ENTER/OK button to access the icon’s sub-menu.
3. Press the EXIT button to exit.
The on-screen menus disappear from the screen after about one minute.
Mode
:
Dynamic
Backlight : 10
Contrast : 100
Brightness : 45
Sharpness : 75
Colour : 55
Tint (G/R) : G50/R50
Detailed Settings
Picture
DTV Air
05.1
Thu 6 Jan 10:01 am
Now_E vent(1 /2), Ver(2/6) : It sh o...
Now_Even t(1/2), Ver( 2/6) : Ex tended Eve nt Text...It should be less the n 192 byt es and 80 standard size chara cters, The total nu mber of AP R codes u sed in th e
♥
TV GloboHD
10:00 am - 11:00 am
12 1080i Multi
English - 11
Selecting a Menu Language
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button. Press the ▲ or ▼ button to select "Language", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select “English” or "中文". Press the ENTER/OK button.
Press the EXIT
button to exit.
“Light Effect” is only for LA40N81BD/LA46N81BD/LA52N81BD.
Setup
Plug & Play
Language : English ►
Time
Subtitle
Preference
Light Effect : Viewing Mode On
Wall-Mount Adjustment
Melody : High
Energy Saving : Off
Setup
Plug & Play
Language : English ►
Time
Subtitle
Preference
Light Effect : Viewing Mode On
Wall-Mount Adjustment
Melody : High
Energy Saving : Off
English
中文
English - 12
Memorizing the Channels
Your TV can memorize and store all of the available channels for both "off-air" (Air) and "Cable" channels. After the available channels are memorized, use the CH or
CH
button to scan through the channels. This eliminates the need to change channels by entering the channels digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding or deleting channels (Channel Lists).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
2. Press the ENTER/OK button select “Antenna”.
Press the ▲ or ▼ button to select “Air” or “Cable”, then press the ENTER/OK button.
Press the EXIT
button to exit.
Channel
Antenna
:
Air ►
Auto Store
Manual Store
Full Guide
Mini Guide
Default Guide : Mini Guide
Channel List
Child Lock
Channel
Antenna
:
Air ►
Auto Store
Manual Store
Full Guide
Mini Guide
Default Guide : Mini Guide
Channel List
Child Lock
Air
Cable
If the antenna is connected to ANT 1 IN (AIR), select “Air” and if it is connected to ANT 2 IN (CABLE), select “Cable”.
If both ANT 1 IN (AIR) and ANT 2 IN (CABLE)
are connected, select the antenna input you
want.
If the antenna input is not selected properly,
noise may appear on the screen.
or
Press the ANTENNA button on the remote control to select "AIr" or "Cable".
Channel Control
English - 13
Storing Channels in Memory (Automatic Method)
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Channel”, then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Auto Store", then press the ENTER/OK button.
3.
Press the ▲ or ▼ button to select an antenna connection, then press the ENTER/ OK button.
Air: “Air” antenna signal.
Cable: “Cable” antenna signal. Air+Cable: “Air” and “Cable” antenna signals.
If the antenna is connected to ANT 1 IN (AIR), select "Air" and if it is connected
to ANT 2 IN (CABLE), select "Cable".
If both ANT 1 IN (AIR) and ANT 2 IN (CABLE) are connected, select the
"Air+Cable".
The TV begins memorizing all available stations. When pressing the ENTER/
OK button during a storing process, the message "Stop Auto Store" is
displayed. Select "Yes" by pressing the ◄ or ► button.
4.
After all the available channels are stored, the “Auto Store” menu reappears. Press the EXIT button to exit.
ReturnEnter
Auto Store
Select the antenna to perform Auto store for.
Air
Cable
Air + Cable
Auto Store
Auto Store incomplete. 3 channels are memorized. Air : 1 Cable : 2
ReturnEnter
OK
Auto Store
3%
ReturnEnter
No
Yes
Move
Auto Store
Stop
Enter
3%
Return
Channel
Antenna
:
Air
Auto Store ►
Manual Store
Full Guide
Mini Guide
Default Guide : Full Guide
Channel List
Child Lock
Fine Tune
Start
Start
Start
Stop Auto Store? Air S 19 30 9Mhz Air Digital : -- Cable Digital : -­ Analog : -- Analog : --
Auto Store in Progress. C ab le 5 9 Air Digital : -- Cable Digital : -­ Analog : -- Analog : --
Move
English - 14
Storing Channels Manually
You can store television channels, including those received via cable networks. When storing channels manually, you can choose:
♦ Whether or not to store each of the channels found. ♦ The programme number of each stored channel which you wish to identify.
1. Press the MENU button to display the menu.
2. Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "Manual Store", then press the ENTER/OK
button.
4.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER/ OK button.
5. When you are satisfied with your setting, press the ENTER/OK button.
6. Press the EXIT button to exit.
♦
Programme (Programme number to be assigned to a channel)
- Press the ▲ or ▼ button until you nd the correct number. You can also select the channel number directly by pressing the numeric buttons
(0~9).
♦ Colour System: Auto/PAL/SECAM/NTSC4.43/NTSC3.58
- Press the ▲ or ▼ button to select the required colour standard.
♦ Sound System: DK/I/BG/M/L
- Press the ▲ or ▼ button to select the required sound standard.
♦
Channel (When you know the number of the channel to be stored)
- Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).
- Press the ► button, then press the ▲ or ▼ button to select the required number.
You can also select the channel number directly by pressing the numeric buttons (0~9).
If there is abnormal sound or no sound, reselect the sound standard required.
♦
Search (When you do not know the channel numbers)
- Press the ▲ or ▼ button to start the search.
- The tuner scans the frequency range until the rst channel or the channel that you
selected is received on the screen.
♦
Store (When you store the channel and associated programme number)
- Set to OK by pressing the ENTER/OK button.
Channel mode
♦
P (Programme mode): When completing tuning, the broadcasting stations in your
area have been assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode.
♦
C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this
mode.
♦
S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.
Channel
Digital Channel
Analog Channel
Antenna : Air
Auto Store
Manual Store
Full Guide
Mini Guide
Default Guide : Full Guide
Channel List
Child Lock
Fine Tune
Signal Information
Manual Store
Move
Adjust
8MHz554000 KHz31
Channel
ReturnEnter
Frequence Bandwidth
Start
Manual Store
Move
Adjust
BGAuto1
Programme
ReturnEnter
Color System Sound System
?62 MHzC 2
Channel Search Store
Channel
Antenna : Air
Auto Store
Manual Store ►
Full Guide
Mini Guide
Default Guide : Full Guide
Channel List
Child Lock
Fine Tune
Signal Information
Channel
English - 15
Viewing the EPG (Electronic Programme Guide) Information
The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information becomes available.
♦ Mini Guide
- The information of each program is displayed by each line on the current channel
Mini Guide screen from the current program onwards according to the program starting time order
♦ Full Guide
- Displays the programme information as time ordered One hour segments. Two hours
of programme information is displayed which may be scrolled forwards or backwards in time.
1.
Press the MENU button to display the menu.
2.
Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button. Press the ▲ or ▼ button to select "Full Guide" or "Mini Guide" then press the
ENTER/OK button.
To... Then...
Watch a programme in the EPG list
Exit the guide
Select a programme by pressing the ▲, ▼, ◄, ► button.
Press the blue button
•
•
If the next program is selected, it is scheduled with the clock icon displayed. If
the ENTER/OK button is pressed again, press the ◄, ► button to select Cancel Schedules, the scheduling is canceled with the clock icon gone. For details about scheduling programmes, refer to the next page.
View programme information
Select a programme of your choice by
pressing the ▲, ▼, ◄, ► button.
Press the INFO button when the programme of your choice is highlighted.
•
•
Toggle between the "Mini Guide" or "Full Guide"
Press the red button repeatedly.
•
The programme title is on the upper part of the screen center. Please click on
INFO button for the detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality Information(HD/SD), Sound Modes, Subtitle or Teletext, languages of Subtitle or Teletext and brief summary of the highlighted programme are included on the detailed information. "..." will be appeared if the summary is long.
Six channels are displayed. to scroll between channels, move to a channel using
the ▲ or ▼ button. To display page by page, use the green or yellow button.
Scrolls backwards quickly (24 hours). Press the green button repeatedly.
•
Scrolls forwards quickly (24 hours). Press the yellow button repeatedly.
•
You can also display the guide menu simply by pressing the GUIDE button.
Auto Store Manual Store
Full Guide
►
Mini Guide
Default Guide : Full Guide
Channel List
Child Lock
Fine Tune
Signal Information
LNA : On
Channel
Manual Store Full Guide
Mini Guide
►
Default Guide : Full Guide
Channel List
Child Lock
Fine Tune
Signal Information
LNA : On
Channel
Full Guide
DTV Cable 900 f tn Mon, Dec 4 2:13 am Freshmen On Campus 2:00 am - 2:30 am
No Detailed Information
Today 2:00 am - 3:00 am 3:00 am - 4:00 am
Mint Extra Loaded Fresh 40 with Dynamite MC The Distillery Smash Hits! Sunday
900 f tn 901 ITV Play 902 Kerrang! 903 Kiss 903 oneword 903 Smash Hits!
▼
Street Hypn..
Kisstory No Information
No Information
No Information
Freshmen O..
Watch
INFO
Information
Mini Guide
+24 Hours
Exit
Mini Guide DTV Cable 900 f tn
Street Hypnosis Booze Britain
2:00 am 2:30 am 5:00 am
▼
Freshmen On Campus
Watch
INFO
Information
Full Guide
Next Page
Exit
English - 16
Setting the Default Guide
You can preset the default guide style.
1. Press the MENU button to display the menu.
2.
Press the ▲ or ▼ button to select "Channel".
3.
Press the ▲ or ▼ button to select "Default Guide", then press the ENTER/OK button.
4.
Select "Mini Guide" or "Full Guide" using the ▲ or ▼ button, and press the
ENTER/OK button.
5.
Press the EXIT button to exit.
Channel
Mini Guide
Full Guide
Full Guide Mini Guide
Default Guide
Channel List
Child Lock
Fine Tune
Signal Information
LNA : On
Full Guide Mini Guide
Default Guide : Full Guide ►
Channel List
Child Lock
Fine Tune
Signal Information
LNA : On
Channel
English - 17
Managing Channels
Using this menu, you can Add/Delete or set Favorite channels and use the program guide for digital broadcasts.
Viewing All Channels
Show all currently available channels. To use the Channel List function, first run Auto Store (see page 13).
1.
Press the MENU button.
Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button. Press the ▲ or ▼ button to select "Channel List", then press the ENTER/OK
button.
2. Press the ◄ button to select "Added Channels".
3.
Press the ▲ or ▼ button to select "All Channels", then press the ENTER/OK button. Shows all currently available channels.
4. Press the ▲ or ▼ button to select a channel to view, then press the ENTER/OK button. You can watch the selected channel.
Press the CH LIST button on the remote control to bring up the channel lists.
Using the Color buttons on the Remote with the Channel List
• Red (Antenna): Switches to Air or Cable.
•
Green (Zoom): Enlarges or shrinks a channel number.
• Yellow (Select):
Selects multiple channel lists.
•
TOOLS
(Option): Displays the "Add" (or "Delete"), Add Favorite
(or Delete Favorite), "Lock" (or "Unlock")-- when the Child Lock set to On, "Timer Viewing" and "Edit Channel Name", "Sort" (DTV is Channel Number Edit) and "Auto store"
A gray-colored channel refers to a deleted channel. The "Add" menu only appears for deleted channels.
A channel marked with the ♥ mark refers to a channel set as a Favorite. The "Delete Favorite" menu only appears for chan­nels with the ♥ mark.
Channel
Mini Guide
Default Guide : Full Guide
Channel List ►
Child Lock
Fine Tune
Signal Information
LNA : On
3 Air
4 Air
05.1 ♥ TV GloboHD
7 Air
9 Air
Added Channels
Air
Antenna
Zoom
Select
TOOLS
Option
3 Air
4 Air
05.1 ♥ TV GloboHD
7 Air
9 Air
All Channels
Air
Antenna
Zoom
Select
TOOLS
Option
English - 18
Adding and Erasing Channels
You can add or delete a channel to display the channels you want.
1.
Press the MENU button.
Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button. Press the ▲ or ▼ button to select "Channel List", then press the ENTER/OK
button.
2. Press the ◄ button to select "Added Channels".
3.
Press the ▲ or ▼ button to select "All Channels", then press the ENTER/OK button.Shows all currently available channels.
4.
Press the ▲ or ▼ button to select a channel to add, then press the TOOLS button.
5.
Press the ENTER/OK button to select "Add".
All added channels will be shown on "Added Channels" menu.
6.
Press the ▲ or ▼ button to select a channel to delete, then press the TOOLS
button.Press the ENTER/OK button to select "Delete".
Press the EXIT
button to exit.
You can also delete a channel in the "Added Channels" menu in the same manner.
Press the CH LIST button on the remote control to bring up the channel lists.
Channel
Mini Guide
Default Guide : Full Guide
Channel List ►
Child Lock
Fine Tune
Signal Information
LNA : On
3 Air
4 Air
05.1 ♥ TV GloboHD
7 Air
9 Air
Added Channels
Air
Antenna
Zoom
Select
TOOLS
Option
3 Air
4 Air
05.1 ♥ TV GloboHD
7 Air
9 Air
All Channels
Air
Antenna
Zoom
Select
TOOLS
Option
3 Air
4 Air
05.1 ♥ TV GloboHD
7 Air
9 Air
Add
Add to Favorite
Timer Viewing
Edit Channel Name
Sort
Auto store
All Channels
Air
Antenna
Zoom
Select
TOOLS
Option
Adding a Multichannel
If you have channels memorized using "Auto Store", only one multichannel is memorized. Add the multichannels you want using "All Channels".
1.
Follow the “Adding and Erasing Channels” instructions number 1 to 2.
2.
Press the ▲ or ▼ button to select a multichannel to add, then press the TOOLS
button.
3. Press the ENTER/OK button to select "Add".
All added channels will be shown on "Added Channels" menu.
4.
Press the EXIT button to exit.
01.1 ♥
TV GLOBO!j1
05.1 ♥
TV GloboHD
05.2 TV GloboSD1
05.3 TV GloboSD2
05.4 TV GloboSD3
All Channels
Air
Antenna
Zoom
Select
TOOLS
Option
► Next Program
►
NowEvent(1/2),Ver(4/6) : It Should...
01.1 ♥
TV GLOBO!j1
05.1 ♥
TV GloboHD
05.2
TV GloboSD1
05.3 TV GloboSD2
05.4 TV GloboSD3
All Channels
Air
Antenna
Zoom
Select
TOOLS
Option
Add
Add to Favorite
Timer Viewing
Edit Channel Name
Channel Number Edit
Auto store
English - 19
Setting Your Favorite Channels
You can set channels you watch frequently as favorites.
1.
Press the MENU button.
Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button. Press the ▲ or ▼ button to select "Channel List", then press the ENTER/OK
button.
2.
Press the ▲ or ▼ button to select a channel as a favorite channel, then press
the TOOLS button.
3.
Press the ▲ or ▼ button to select "Add Favorite", then press the ENTER/OK button. The “♥” symbol will be displayed and the channel will be set as a favorite.
4. To cancel your favorite channel selection, press the TOOLS button when a favorite
channel is selected. Press the ▲ or ▼ button to select "Delete Favorite", then press
the ENTER/OK button. The channel is deleted from Favorites and the “♥” mark also disappears.
Press the EXIT
button to exit.
You can also Add or Delete a channel from Favorites in the "Added channels" menu in the same manner.
All favorite channels will be shown on "Favorite" menu.
Press the CH LIST button on the remote control to bring up the channel lists.
To select the favorite channels you have set up, press the FAV.CH button on the
remote control.
3 Air
4 Air
05.1 ♥ TV GloboHD
7 Air
9 Air
Added Channels
Air
Antenna
Zoom
Select
TOOLS
Option
3 Air
4 Air
05.1 ♥ TV GloboHD
7 Air
9 Air
Delete
Add to Favorite
Timer Viewing
Edit Channel Name
Sort
Auto store
Added Channels
Air
Antenna
Zoom
Select
TOOLS
Option
Channel
Mini Guide
Default Guide : Full Guide
Channel List ►
Child Lock
Fine Tune
Signal Information
LNA : On
Loading...
+ 48 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use