SAMSUNG LA40A550P1R User Manual

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
AUSTRALIA 1300 362 603 www.samsung.com CHINA 800-810-5858
HONG KONG 3698-4698 www.samsung.com/hk INDIA 3030 8282
INDONESIA 0800-112-8888 www.samsung.com JAPAN 0120-327-527 www.samsung.com/jp MALAYSIA 1800-88-9999 www.samsung.com/my NEW ZEALAND 0800SAMSUNG(726-7864) www.samsung.com/nz PHILIPPINES 1800-10-SAMSUNG(726-7864) www.samsung.com/ph SINGAPORE 1800-SAMSUNG(726-7864) www.samsung.com THAILAND 1800-29-3232
TAIWAN 0800-329-999 www.samsung.com/tw VIETNAM 1 800 588 889 www.samsung.com SOUTH AFRICA 0860-SAMSUNG(726-7864 ) www.samsung.com U.A.E 800-SAMSUNG (726-7864)
Customer Care Centre
010-6475 1880
1800 110011
02-689-3232
8000-4726
Web Site
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
LCD TV
user manual
BN68-01415A-00
imagine the possibilities
Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at
www.samsung.com/global/register
Model Serial No.
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also
• known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
• To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of
• the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.
Contents
CONNECTING AND PREPARING YOUR TV
List of Parts ........................................................ 2
Installing the Stand ............................................. 2
Installing the Wall Mount Kit ............................... 2
Viewing the Control Panel .................................. 3
Viewing the Connection Panel ........................... 4
Viewing the Remote Control ............................... 6
Installing Batteries in the Remote Control .......... 7
Switching On and Off ......................................... 7
Placing Your Television in Standby Mode........... 7
Viewing the Menus ............................................. 8
Using the TOOLS Button .................................... 8
Plug & Play ......................................................... 9
SETTING THE CHANNELS
Storing Channels Automatically ....................... 10
Storing Channels Manually ...............................11
Adding / Locking Channels .............................. 12
Sorting the Stored Channels ............................ 13
Assigning Channels Names ............................. 13
Fine Tuning Channel Reception ....................... 14
SETTING THE PICTURE
Changing the Picture Standard ........................ 15
Adjusting the Custom Picture ........................... 16
Conguring Detailed Settings on the Picture ... 16
Resetting the Picture Settings to the Factory
Defaults ............................................................ 17
Conguring Picture Option ............................... 18
Viewing the Picture In Picture (PIP) ................. 20
SETTING THE SOUND
Sound Features ................................................ 21
Selecting the Sound Mode ............................... 22
Connecting Headphones (Sold separately) ..... 22
SETTING THE TIME
Setting and Displaying the Current Time .......... 23
Setting the Sleep Timer .................................... 23
Switching the Television On and Off
Automatically .................................................... 24
FUNCTION DESCRIPTION
Choosing Your Language ................................. 24
Melody / Entertainment / Energy Saving ......... 25
Selecting the Source ........................................ 27
Editing the Input Source Names ...................... 27
SETTING THE PC
Setting up Your PC Software
(Based on Windows XP) .................................. 28
Display Modes .................................................. 28
Setting up the TV with your PC ........................ 29
WISELINK
Using the WISELINK Function ......................... 30
Using the WISELINK Menu .............................. 31
Using the PHOTO (JPEG) List ......................... 32
Using the MP3 List ........................................... 35
Using the Setup Menu ...................................... 36
ABOUT ANYNET
What is Anynet+? ............................................ 37
Connecting Anynet+ Devices ........................... 37
Setting Up Anynet+ .......................................... 38
Scanning and Switching between Anynet+
Devices ............................................................ 39
Recording ......................................................... 41
Listening through a Receiver ........................... 41
Check Points before Requesting Service ......... 42
+
RECOMMENDATIONS FOR USE
Teletext Feature ............................................... 43
Auto Wall-Mount (Sold separately) ................... 45
Using the Anti-Theft Kensington Lock
(depending on the model) ................................ 46
Troubleshooting: Before Contacting Service
Personnel ......................................................... 47
Technical and Environmental Specications ... 48
Symbol Press Note One-Touch
English - 1
Button

List of Parts

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
M4 X L16
Remote Control
& Batteries
(AAA x 2)
Owner’s Instructions
Warranty card / Safety Guide / Registration Cards (Not available in all locations)
The stand and stand screw may not be included depending on the model.
Power Cord Cover-Bottom
Warranty card
Stand Screw
X 4
Safety Guide
Stand Cleaning Cloth

Installing the Stand

2
1
Registration Cards
1. Connect your LCD TV and the stand. Two or more people should carry the TV.
Make sure to distinguish between the front and back of the stand when assembling them.
2. Fasten two screws at position 1 and then fasten two screw at position 2. Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed
down, it may lean to one side. The stand is installed for models with the screen size of 37 inch and above.

Installing the Wall Mount Kit

Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.
Remove the stand and cover the bottom hole with a
cap and fasten with two screws.
English - 2

Viewing the Control Panel

8 8
4
1
2
3
5 6
7
The product colour and shape may vary depending on the model.
Front Panel buttons Touch each button to operate.
SOURCE
1
Toggles between all the available input sources (TV, AV1, AV2, S-Video, Component1, Component2, PC, HDMI1, HDMI2, HDMI3). In the on-screen menu, use this button as you use the
ENTER
MENU
2
Press to see an on-screen menu of your TV’s features.
- VOL +
3
Press to decrease or increase the volume. In the on-screen menu, use the - VOL + buttons
as you use the ◄ and ► buttons on the remote
control.
4
Press to change channels. In the on-screen menu, use the buttons as you use the ▼ and ▲ buttons on the remote control. (Without the Remote Control, you can turn on the TV by using the Channel buttons.)
button on the remote control.
English - 3
5
Power Indicator
Blinks and turns off when the power is on and lights up in stand-by mode.
(Power)
6
Press to turn the TV on and off.
Remote Control Sensor
7
Aim the remote control towards this spot on the TV.
Speakers
8

Viewing the Connection Panel

1
2 3 4 5
[Side Panel Jacks]
3
6
7
8
!
The product colour and shape may vary depending on the model.
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
1 PC IN [PC] / [AUDIO]
Connect to the video and audio output jack on your PC.
-
2 Connecting External A/V Devices (AV IN 1)
Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
-
Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to
-
corresponding audio out connectors on the A/V device.
3 HDMI IN 1, HDMI IN 2, HDMI IN 3
Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)
-
No additional Audio connection is needed for an HDMI to HDMI connection.
-
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
-
What is HDMI?
“High Denition Multimedia interface” allows the transmission of high denition digital video data
-
and multiple channels of digital audio. The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate
-
cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.
The TV may not output sound and pictures may be displayed with abnormal colour when DVD
players/Cable Boxes/Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-L] jacks on the back of the TV. If this happens, contact the company that provided the DVD player/Cable Box/Satellite
receiver to conrm the HDMI version, then request a rmware update. HDMI cables that are not
1.3 may cause annoying icker or no screen display.
Power Input
English - 4
90
DVI IN(HDMI2) [R-AUDIO-L]
DVI audio outputs for external devices.
-
Supported modes for HDMI/DVI and Component
HDMI/DVI 50Hz X X X O O O O HDMI/DVI 60Hz X O X X O O O
Component O O O O O O O
480i 480p 576i 576p 720p 1080i 1080p
4 ANT IN
To view television channels correctly, a signal must be received by the set from one of the following sources:
An outdoor aerial / A cable television network / A satellite network
-
5 SERVICE
Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing angle using your remote control.
6 WISELINK
Connect a USB mass storage device to view photo les (JPEG) and play audio les (MP3)
-
7 S-VIDEO or VIDEO / R-AUDIO-L
Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or
-
Camcorder. Connect RCA audio cables to "R-AUDIO-L" on your set and the other ends to corresponding audio out
-
connectors on the A/V device.
8 Headphones jack
Headphone may be connected to the headphone output on your set. While the head phone is
-
connected, the sound from the built-in speakers will be disabled.
9 AUDIO OUT [R-AUDIO-L]
Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to
-
corresponding audio in connectors on the Amplier or DVD Home Theatre.
0 COMPONENT IN 1,2
Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of your
-
set and the other ends to corresponding component video out connectors on the DVD. If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD
-
and connect the DVD to component connector ("PR", "PB", "Y") on your set. The PR, PB and Y connectors on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y
-
or Y, Cb and Cr. Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to
-
corresponding audio out connectors on the DVD.
! Kensington Lock (depending on the model)
The Kensington lock (optional) is a device used to physically x the system when used in a public place.
-
If you want to use a locking device, contact the dealer where you purchased the TV.
-
The location of the kensington lock may be different depending on its model.
-
English - 5

Viewing the Remote Control

1 Television Standby button
2 Selects the TV mode
directly
3 Number buttons for directNumber buttons for direct
channel access
4 One/Two-digit channel
selection
5 +: Volume increase
-: Volume decrease
6 Temporary sound switch-Temporary sound switch-
off
7 It display "Channel List"It display "Channel List"
on the screen.
8 Use to quickly selectUse to quickly select
frequently used functions.
9 Use to see information onUse to see information on
the current broadcast
0 Colour buttons :Colour buttons :
Use these buttons in the Channel list and WISELINK, etc.
@ Press to select the optionalPress to select the optional
display and sound modes for sports, cinema and games.
# Use these buttons in theUse these buttons in the
DMA, WISELINK, and Anynet+. ( : This remote can be used to control recording on Samsung recorders with the Anynet+ feature)
$ Available source selectionAvailable source selection % Previous channel ^ P<: Next channel
P>: Previous channel & Displays the main on-Displays the main on-
screen menu
* This function enables youThis function enables you
to view and play photo and music files from an external device.
( Returns to the previousReturns to the previous
menu
The performance of the remote control may be affected by bright light.
) Control the cursor in theControl the cursor in the
menu
a Exit the on-screen menuExit the on-screen menu b Use this when connecting
a SAMSUNG DMA (Digital Media Adapter) device through an HDMI interface and switching to DMA mode. (The DMA button is optional.) For more information on the operating procedures, refer to the user manual of the DMA. This button is available when “Anynet+(HDMI-CEC)" is “On” (see page 38)
c Picture size selectionPicture size selection d Selects the HDMI mode
directly.
e Picture effect selection
Teletext Functions
2 Exit from the teletext display
7 Teletext store
8 Teletext size selection
9 Teletext reveal
0 Fastext topic selection
! Alternately select Teletext,
Double, or Mix.
$ Teletext mode selection (LIST/FLOF)
% Teletext sub page
^ P<: Teletext next page
P>: Teletext previous page
& Teletext index
( Teletext hold
a Teletext cancel
English - 6

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the
gure.
2. Install two AAA size batteries. Make sure to match the "+" and "–" ends of the batteries with the
diagram inside the compartment.
3. Replace the cover. Remove the batteries and store them in a cool, dry place if you won’t be
using the remote control for a long time.
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special uorescent light or neon sign nearby?

Switching On and Off

The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
The standby indicator lights up
2. Press the P button You also can press the POWER button or the TV button on the remote control to turn the TV
on. The programme that you were watching last is reselected automatically.
3. Press the numeric button (0~9) or channel up/down (</>) button on the remote control or
button
on your set.
When you switch the set on for the very rst time, you will be asked to choose language in which the
menus are to be displayed.
4. To switch your set off, press the POWER button again.
on your set.
on your set.

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWER button on the remote control.
The screen is turned off and a red standby indicator appears on your set.
2. To switch your set back on, simply press the POWER , numeric buttons (0~9), TV button or channel
up/down (</>) button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for
example). It is best to unplug the set from the mains and aerial.
English - 7

Viewing the Menus

1. With the power on, press the MENU button.
The main menu appears on the screen. The menu’ s left side has
icons: Picture, Sound, Channel, Setup, Input.
2. Press the ▲ or ▼ button to select one of the icons.
Then press the
ENTER
button to access the icon’s sub-menu.
3. Press the EXIT button to exit. The on-screen menus disappear from the screen after about
one minute.

Using the TOOLS Button

You can use the TOOLS button to select your frequently used functions quickly and easily. The “Tools” menu change depending on which external input mode you are viewing.
1. Press the TOOLS button.
The “Tools” menu will appear.
2. Press the ▲ or ▼ button to select a menu.
3. Press the ▲/▼/◄/►/
use the selected items. For a more detailed description of each function, refer to the corresponding page.
Anynet+ (HDMI-CEC), see page 38
Picture Mode, see page 15
Sound Mode, see page 21
Sleep Timer, see page 23
SRS TS XT, see page 21
Energy Saving, see page 26
Dual l-ll, see page 22
PIP, see page 20
Auto Adjustment, see page 29
ENTER
buttons to display, change, or
TV
Mode : Standard Backlight 7 Contrast 95 Brightness 45 Sharpness 10 Colour 50
Tint G50 R50
Detailed Settings sMore
Move Enter Return
Anynet+ (HDMI-CEC) Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off Dual l-ll : Mono
Move Enter Exit
Picture
Tools
English - 8

Plug & Play

When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available.
1. Press the POWER button on the remote control.
The message "Start Plug & Play" is displayed with "OK" selected.
2. Select the appropriate language by pressing the ▲ or ▼ button.
Press the
3. Press the ◄ or ► button to select “Store Demo” or “Home Use”,
then the
➣ ➣
4. The message "Check antenna input." is displayed with "OK" selected.
Press the
5. Select the appropriate area by pressing the▲ or ▼ button.
Press the
6.
The "Auto Store" menu is displayed with the "Start" selected. Press the
➣ ➣ ➣
7. Press the
Select the "Month", "Day" , "Year", "Hour", "Minute", or "am/pm" by pressing the ◄ or ► button. Set the "Month", "Day" , "Year", "Hour", "Minute", or "am/pm" by pressing the ▲ or ▼ button.
8. Press the
When you have nished, press the
♦ ♦ ♦ ♦
ENTER
ENTER
We recommend setting the TV to "Home Use" mode for the best picture in your home environment. "Store Demo" mode is only intended for use in retail environments. If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use” (Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
ENTER
Please check that the antenna cable is connected correctly.
ENTER
The channel search will start and end automatically. Press the After all the available channels are stored, the "Clock Set" menu appears.
ENTER
You can also set the “Month”, “Day”, “Year”, “Hour” and "Minute" by pressing the number buttons on the remote control.
ENTER
Even if the several seconds.
Language: Select your language. Area: Select your area. Auto Store: Automatically scans for and stores channels available in the local area. Clock Set: Sets the current time for the TV clock.
button to conrm your choice.
button.
button.
button to conrm your choice.
ENTER
ENTER
ENTER
button at any time to interrupt the memorization process.
button.
button to conrm your setting. The message “Enjoy your viewing” is displayed.
ENTER
button is not pressed, the message will automatically disappear after
button.
Plug & Play
Start Plug & Play.
OK
Enter
button.
English - 9
If you want to reset this feature...
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER
2. Press the
button.
ENTER
button again, to select "Plug & Play".
For further details on setting up options, refer to the page 9.
The “Plug & Play” feature is only available in the TV mode.

Storing Channels Automatically

-
Storing Channels Manually
-
TV
Plug & Play Language : English Time
Auto Wall-Mount
Melody : Off Entertainment : Off Energy Saving : Off
PIP
Move Enter Return
Start Plug & Play.
Enter Return
TV
Area : Auto Store Manual Store Channel Manager Sort Name Fine Tune
Move Enter Return
Setup
Plug & Play
OK
Enter Return
Channel
Asia/W.Europe 
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability depends on your area). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
2. Press the
ENTER
button to select "Area".
3. Select the appropriate area by pressing the ▲ or ▼ button.
Press the
ENTER
button to conrm your choice.
4. Press the ▲ or ▼ button to select "Auto Store", then press the
5. Press the
➣ ➣
ENTER
button.
The TV will begin memorizing all of the available channels. Press the
ENTER
button at any time to interrupt the memorization process and return to the
"Channel" menu.
6. After all the available channels are stored, the "Sort" menu appears. (refer to page 13)
ENTER
ENTER
button.
button.
English - 10

Storing Channels Manually

You can store television channels, including those received via cable networks. When storing channels manually, you can choose:
♦ Whether or not to store each of the channels found. ♦ The programme number of each stored channel which you wish
to identify.
TV
Area : Auto Store Manual Store Channel Manager Sort Name Fine Tune
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
button.
2. Press the ▲ or ▼ button to select "Manual Store", then press
the
ENTER
button.
3. Select the required option by pressing the ▲ or ▼ button, then
press the
ENTER
button.
Move Enter Return
Move Enter Return
TV
Programme : P 2 Colour System : Auto Sound System : BG Channel : C 3 Search : 77 MHz Store : ?
4. When you are satised with your setting, press the
ENTER
5. Press the EXIT button to exit.
Programme (Programme number to be assigned to a channel)
-
Colour System: Auto/PAL/SECAM/NTSC4.43/NTSC3.58
-
Sound System: BG/DK/I/M
-
Channel (When you know the number of the channel to be stored)
-
-
➣ ➣
Search (When you do not know the channel numbers)
-
-
button.
Move Enter Return
Press the ▲ or ▼ button until you nd the correct number.
You can also select the channel number directly by pressing the numeric buttons (0~9).
Press the ▲ or ▼ button to select the required colour standard.
Press the ▲ or ▼ button to select the required sound standard.
Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel). Press the ► button, then press the ▲ or ▼ button to select the required number.
You can also select the channel number directly by pressing the numeric buttons (0~9). If there is abnormal sound or no sound, re-select the sound standard required.
Press the ▲ or ▼ button to start the search.
The tuner scans the frequency range until the rst channel or the channel that you selected is
received on the screen.
Store (When you store the channel and associated programme number)
Set to "OK" by pressing the
­Channel mode
P (Programme mode): When completing tuning, the broadcasting stations in your area have been
-
ENTER
button.
assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode.
C (Air channel mode): You can select a channel by entering the assigned number to each air
-
broadcasting station in this mode.
S (Cable channel mode): You can select a channel by entering the assigned number for each cable
-
channel in this mode.
Channel
Manual Store
Asia/W.Europe 
English - 11

Adding / Locking Channels

Using the Channel Manager, you can conveniently lock or add channels.
1. Press the MENU button to display the menu.
Press the or button to select "Channel", then press the
ENTER
2. Press the or button to select "Channel Manager", then
press the
Adding channels
Using the Channel List, you can add channels.
3. Select Channel List by pressing the
4. Move to the ( ) eld by pressing the ▲, ▼, ◄ or ►
button, select a channel to be added, and press the
ENTER
button.
ENTER
button.
ENTER
button.
button to add the channel.
If you press the
ENTER
button again, the ( ) symbol next to the channel disappears and the channel is not added. “ ” is active when "Child Lock" is selected to "On".
TV
Area : Auto Store Manual Store Channel Manager Sort Name Fine Tune
Move Enter Return
TV
Channel List Child Lock : Off
Move Enter Return
Channel
Channel Manager
Asia/W.Europe 
♦ Locking channels
This feature allows you to prevent unauthorized users, such as
children, from watching unsuitable programmes by muting out video and audio.
5. Press the ▲ or ▼ button to select "Child Lock", then press the
ENTER
button.
6. Select "On" by pressing the ▲ or ▼ button, then press the
ENTER
button.
7. Press the ▲ or ▼ button to select "Channel List", then press
the
ENTER
button.
8. Move to the ( ) eld by pressing the ▲, ▼, ◄ or ► button,
select a channel to be locked, and press the
ENTER
button.
If you press the
ENTER
button again, the ( ) symbol next to the channel disappears and the channel lock is cancelled. A blue screen is displayed when "Child Lock" is activated.
Channel List
P 1 C3
Prog.
0 C--
1 C3
2 BBC 1
3 C74
4 C75
5 C76
6 S3
7 S4
8 S6
9 S7
Add Lock
Move Enter
Page Return
9. Press the EXIT button to exit.
Select "On" or "Off" in "Child Lock" to easily turn the channels which selected on " " to be active
or inactive.
You can select these options by simply pressing the CH LIST
button on the remote control.
1 / 10
English - 12

Sorting the Stored Channels

This operation allows you to change the programme numbers of the stored channels.
This operation may be necessary after using the auto store.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
button.
2. Press the ▲ or ▼ button to select "Sort", then press the
ENTER
button.
3. Select the channel number that you wish to change by
pressing the ▲ or ▼ button repeatedly. Press the
ENTER
button. The selected channel number and name are moved to right side.
4. Press the ▲ or ▼ button to move to the position in which you
would like to change and then press the
The selected channel is exchanged with the one
ENTER
button.
previously stored to the chosen number.
5. Repeat steps 3 to 4 for another channel to be sorted.
6. Press the EXIT button to exit.
TV
Area : Auto Store Manual Store Channel Manager Sort Name Fine Tune
Move Enter Return
TV
Prog. Ch. Name 0 C--
1 C23
2 C16 3 C3 4 S1 s
Move Enter Return

Assigning Channels Names

Channel names will be assigned automatically when channel information is broadcast. These names can be changed,
allowing you to assign new names.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
button.
2. Press the ▲ or ▼ button to select "Name", then press the
ENTER
button.
3. If necessary, select the channel to be assigned to a new
name by pressing the ▲ or ▼ button. Press the
ENTER
button
The selection bar is displayed around the name box.
4.
To... Then...
Select a letter, number or symbol Press the ▲ or ▼ button
Move on the next letter Press the ► button
Move back the previous letter Press the ◄ button
Conrm the name
The following characters are available: Letters of the alphabet (A~Z) / Numbers (0~9) / Special
Press the
ENTER
button
characters (+, -, *, /, space)
5. Repeat steps 3 to 4 for each channel to be assigned to a new name.
6. Press the EXIT button to exit.
TV
Area : Auto Store Manual Store Channel Manager Sort Name Fine Tune
Move Enter Return
TV
Prog. Ch. Name 0 C-- ----­1 C23 ----­2 C16 ----­3 C3 ----­4 S1 ----­ s
Move Enter Return
Channel
Asia/W.Europe 
Sort
Channel
Asia/W.Europe 
Name
English - 13

Fine Tuning Channel Reception

Use fine tuning to manually adjust a particular channel for optimal reception.
1. Use the number buttons to directly select the channel that
you want to ne tune.
2. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
3. Press the ▲ or ▼ button to select "Fine Tune", then press
the
4. Press the ◄ or ► button to adjust the ne tuning.
Press the
5. Press the EXIT button to exit. Fine tuned channels that have been saved are marked with
an asterisk "*" on the right-hand side of the channel number in the channel banner. And the channel number turns red.
To reset the ne-tuning, select "Reset" by pressing the ▲ or ▼
button and then press the
ENTER
button.
button.
ENTER
button.
ENTER
button.
Fine Tune
Reset
Channel
Asia/W.Europe 
TV
Area : Auto Store Manual Store Channel Manager Sort Name Fine Tune
Move Enter Return
P 1
Adjust Save Return
0
English - 14
Loading...
+ 35 hidden pages