Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Country
AUSTRALIA 1300 362 603 www.samsung.com
CHINA 800-810-5858
HONG KONG 3698-4698 www.samsung.com/hk
INDIA 3030 8282
INDONESIA 0800-112-8888 www.samsung.com
JAPAN 0120-327-527 www.samsung.com/jp
MALAYSIA 1800-88-9999 www.samsung.com/my
NEW ZEALAND 0800SAMSUNG(726-7864) www.samsung.com/nz
PHILIPPINES 1800-10-SAMSUNG(726-7864) www.samsung.com/ph
SINGAPORE 1800-SAMSUNG(726-7864) www.samsung.com
THAILAND 1800-29-3232
TAIWAN 0800-329-999 www.samsung.com/tw
VIETNAM 1 800 588 889 www.samsung.com
SOUTH AFRICA 0860-SAMSUNG(726-7864 ) www.samsung.com
U.A.E 800-SAMSUNG (726-7864)
Customer Care Centre
010-6475 1880
1800 110011
02-689-3232
8000-4726
Web Site
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
LCD TV
user manual
BN68-01507J-00
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/global/register
Model Serial No.
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
•
Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image
retention. This image retention is also known as "screen burn". To avoid such image retention, reduce
the degree of brightness and contrast of the screen when displaying a still image.
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders
•
displayed on the left, right and center of the screen caused by the difference of light emission
on the screen. Playing a DVD or a game console may cause a similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
Displaying still images from Video games and PC for longer than a certain period of time may produce
•
partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
Contents
CONNECTING AND PREPARING YOUR TV
List of Parts ........................................................ 2
Installing the Stand ............................................. 2
Installing the Wall Mount Kit ............................... 2
Viewing the Control Panel .................................. 3
Viewing the Connection Panel ........................... 4
Viewing the Remote Control ............................... 7
Installing Batteries in the Remote Control .......... 8
Switching On and Off ......................................... 8
Placing Your Television in Standby Mode........... 8
Viewing the Menus ............................................. 9
Using the TOOLS Button .................................... 9
Plug & Play ....................................................... 10
SETTING THE CHANNELS
Storing Channels Automatically ........................11
Storing Channels Manually .............................. 12
Adding / Locking Channels .............................. 13
Sorting the Stored Channels ............................ 14
Assigning Channels Names ............................. 14
Fine Tuning Channel Reception ....................... 15
SETTING THE PICTURE
Changing the Picture Standard ........................ 16
Adjusting the Custom Picture ........................... 17
Conguring Detailed Settings on the Picture ... 17
Resetting the Picture Settings to the
Factory Defaults ............................................... 18
Changing the Picture Options .......................... 19
Viewing the Picture In Picture (PIP)
SETTING THE SOUND
Sound Features ................................................ 22
Selecting the Sound Mode ............................... 23
Connecting Headphones (Sold separately) ..... 23
................. 21
FUNCTION DESCRIPTION
Choosing Your Language ................................. 25
Melody / Entertainment / Energy Saving ......... 26
Selecting the Source ........................................ 27
Editing the Input Source Names ...................... 28
SETTING THE PC
Setting up Your PC Software
(Based on Windows XP) .................................. 29
Display Modes .................................................. 29
Setting up the TV with your PC ........................ 30
ABOUT ANYNET
What is Anynet+? ............................................ 31
Connecting Anynet+ Devices ........................... 31
Setting Up Anynet+ .......................................... 32
Scanning and Switching between
Anynet+ Devices .............................................. 33
Recording ......................................................... 35
Listening through a Receiver ........................... 35
Check Points before Requesting Service ......... 36
+
RECOMMENDATIONS FOR USE
Teletext Feature ............................................... 37
Wall-Mount Adjustment (Sold separately)
(depending on the model) ................................ 39
Using the Anti-Theft Kensington Lock
(depending on the model) ................................ 40
Troubleshooting: Before Contacting
Service Personnel ............................................ 41
Technical and Environmental Specications ... 42
SETTING THE TIME
Setting and Displaying the Current Time .......... 24
Setting the Sleep Timer .................................... 24
Switching the Television On and Off
Automatically .................................................... 25
Symbol Press Note One-Touch
Button
English - 1
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
M4XL16
Remote Control &
Batteries
(AAA x 2)
Owner’s Instructions Warranty card Safety Guide Registration Cards
Warranty card / Safety Guide /
➣
➣
The stand and stand screw may not be included depending on the model.
Power Cord Cover-Bottom Stand Screw X 4 Stand
Registration Cards (Not available in all locations)
Installing the Stand
2
1
Cleaning Cloth
1. Connect your LCD TV and the stand.
Two or more people should carry the TV.
➣
Make sure to distinguish between the front and back of the stand when assembling them.
➣
2. Fasten two screws at position 1 and then fasten two screw at position 2.
Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed
➣
down, it may lean to one side.
The stand is installed for models with the screen size of 37 inch and above.
➣
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount the TV on
the wall.
For detailed information on installing the wall mount, see the
instructions provided with the Wall Mount items. Contact a
technician for assistance when installing the wall mounted bracket.
Samsung Electronics is not responsible for any damage to the
product or injury to yourself or others if you elect to install the TV on
your own.
Do not install your Wall Mount Kit while your TV is turned
on. It may result in personal injury due to electric shock.
Remove the stand and cover the bottom hole with a
➣
cap and fasten with two screws.
English - 2
Viewing the Control Panel
Side Panel buttons
1
2
3
4
5
6
The product colour and shape may vary depending on the model.
1 SOURCE
Toggles between all the available input
sources (TV, AV1, AV2, S-Video, Component1,
Component2, PC, HDMI1, HDMI2, HDMI3).
In the on-screen menu, use this button as
you use the ENTER button on the remote
control.
MENU
2
Press to see an on-screen menu of your TV’s
features.
3 + VOL -
Press to decrease or increase the volume.
In the on-screen menu, use the + VOL -
buttons as you use the ◄ and ► buttons on
the remote control.
4 CH
Press to change channels. In the on-screen
menu, use the CH buttons as you use
the ▲ and ▼ buttons on the remote control.
(Without the Remote Control, you can turn on
the TV by using the Channel buttons.)
(Power)
5
Press to turn the TV on and off.
6 Remote Control Sensor
Aim the remote control towards this spot on
the TV.
7 Power Indicator
Blinks and turns off when the power is on and
lights up in stand-by mode.
8 Speakers
88
7
English - 3
Viewing the Connection Panel
AV IN 2
AV IN 2
AV IN 2
LA40A450C1, LA40A450C2
[TV Rear Panel]
2 3 54 61
[TV Side Panel]
3
7
Power Input
0
9
LA26A450C1, LA32A450C1, LA32A450C2, LA37A450C1
[TV Rear Panel]
4 3 5 2
1
6
0
The product colour and shape may vary depending on the model.
➣
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
➣
➣
When connecting an external device, match the colour of the connection terminal to the cable.
9
Power Input
[TV Side Panel]
3
7
8
8
English - 4
1 PC IN [PC] / [AUDIO]
Connect to the video and audio output jack on your PC.
-
2 Connecting External A/V Devices (AV IN 1)
Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
-
Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to
-
corresponding audio out connectors on the A/V device.
3 HDMI IN 1, HDMI IN 2, HDMI IN 3
-
Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD
players)
-
No additional Audio connection is needed for an HDMI to HDMI connection.
-
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
What is HDMI?
➣
“High Denition Multimedia interface” allows the transmission of high denition digital video data
-
and multiple channels of digital audio.
The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable
-
(not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has
the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports
multi - channel digital audio.
DVI IN(HDMI2) [R-AUDIO-L]
-
DVI audio outputs for external devices.
Supported modes for HDMI/DVI and Component
➣
HDMI/DVI 50Hz
HDMI/DVI 60Hz
Component O O O O O O
4 AUDIO OUT [R-AUDIO-L]
Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends
-
480i 480p 576i 576p 720p 1080i
X X X O O O
X O X X O O
to corresponding audio in connectors on the Amplier or DVD Home Theatre.
5 ANT IN
To view television channels correctly, a signal must be received by the set from one of the following
sources:
An outdoor aerial / A cable television network / A satellite network
-
6 SERVICE
LA26A450C1
-
Connector for SERVICE only.
-
LA32A450C1, LA32A450C2, LA37A450C1, LA40A450C1 LA40A450C2LA37A450C1, LA40A450C1 LA40A450C2C1, LA40A450C1 LA40A450C2, LA40A450C1 LA40A450C2C1 LA40A450C2 LA40A450C2C2
Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing
angle using your remote control.
English - 5
7 S-VIDEO or VIDEO / R-AUDIO-L
Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or
-
Camcorder.
Connect RCA audio cables to "R-AUDIO-L" on your set and the other ends to corresponding audio
-
out connectors on the A/V device.
8 Headphones jack
-
Headphone may be connected to the headphone output on your set. While the head phone is
connected, the sound from the built-in speakers will be disabled.
9 Kensington Lock (depending on the model)
The Kensington Lock (optional) is a device used to physically x the system when used in a public
-
place.
If you want to use a locking device, contact the dealer where you purchased the TV.
-
The location of the Kensington Lock may be different depending on its model.
-
COMPONENT IN
0
Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of
-
your set and the other ends to corresponding component video out connectors on the DVD.
If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD
-
and connect the DVD to component connector ("P
-
The P
R, PB and Y connectors on your component devices (DVD) are sometimes labeled Y, B-Y and
R", "PB", "Y") on your set.
R-Y or Y, Cb and Cr.
-
Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to
corresponding audio out connectors on the DVD.
English - 6
TOOLS
SRS
Viewing the Remote Control
1 Television Standby button
2 Selects the TV mode directly
3 Number buttons for direct
channel access
4
One/Two-digit channel
selection
5 +: Volume increase
: Volume decrease
6 Temporary sound switch-off
7
Displays the Channel List on
screen
8 Use to quickly select
frequently used functions.
9
Use to see information on
the current broadcast
0 Colour buttons :
Use these buttons in the
Channel list, etc.
@
Press to select the optional
display and sound modes for
sports, cinema and games.
# Use these buttons in the
DMA, and Anynet+.
(
: This remote can be
used to control recording on
Samsung recorders with the
Anynet+ feature)
$ Available source selection
% Previous channel
^ P
: Next channel
P : Previous channel
& Displays the main on-screen
menu
* SRS TS XT selection.
(
Returns to the previous
menu
) Control the cursor in the
menu
a Exit the on-screen menu
b Use this when connecting
a SAMSUNG DMA (Digital
Media Adapter) device
through an HDMI interface
and switching to DMA
mode.(The DMA button is
optional.)
For more information on the
operating procedures, refer to
the user manual of the DMA.
This button is available when
+
“Anynet
(HDMI-CEC)" is “On”
(see page 32)
c Picture size selection
d
Selects the HDMI mode
directly.
e
Picture effect selection
Teletext Functions
2 Exit from the teletext display
7 Teletext store
8 Teletext size selection
9 Teletext reveal
0 Fastext topic selection
!
Alternately select Teletext,
Double, or Mix.
$ Teletext mode selection
(LIST/FLOF)
% Teletext sub page
^
P : Teletext next page
P : Teletext previous page
& Teletext index
( Teletext hold
a Teletext cancel
The performance of the remote control may be affected by bright light.
➣
English - 7
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the
figure.
2. Install two AAA size batteries.
Make sure to match the "+" and "–" ends of the batteries with the
➣
diagram inside the compartment.
3. Replace the cover.
➣
Remove the batteries and store them in a cool, dry place if you won’t
be using the remote control for a long time.
If the remote control doesn’t work, check the following:
➣
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special uorescent light or neon sign nearby?
Switching On and Off
The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
The standby indicator lights up on your set.
➣
2. Press the button on your set.
➣
You also can press the POWER button or the TV button on the remote control to turn the TV
on.
The channel that you were watching last is reselected automatically
➣
3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or CH
button on your set.
When you switch the set on for the very rst time, you will be asked to choose language in which the
➣
menus are to be displayed.
4. To switch your set off, press the POWER button again.
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby
mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1.
Press the POWER button on the remote control.
The screen is turned off and a red standby indicator appears on your set.
➣
2. To switch your set back on, simply press the POWER , numeric buttons (0~9), TV button or
channel up/down ( / ) button again.
➣
Do not leave your set in standby mode for long periods of time (when you are away on holiday,
for example).
It is best to unplug the set from the mains and aerial.
English - 8
Viewing the Menus
1. With the power on, press the MENU button.
The main menu appears on the screen. The menu’ s left side
has icons: Picture, Sound, Channel, Setup, Input.
2. Press the ▲ or ▼ button to select one of the icons.
Then press the ENTER button to access the icon’s sub-
menu.
3. Press the EXIT button to exit.
The on-screen menus disappear from the screen after about
one minute.
Using the TOOLS Button
You can use the TOOLS button to select your frequently used
functions quickly and easily. The “Tools” menu change depending
on which external input mode you are viewing.
1.
Press the TOOLS button.
The “Tools” menu will appear.
2. Press the ▲ or ▼ button to select a menu.
3. Press the ▲/▼/◄/►/ENTER buttons to display, change, or
use the selected items. For a more detailed description of each
function, refer to the corresponding page.
• Anynet+ (HDMI-CEC), see page 32
• Picture Mode, see page 16
• Sound Mode, see page 22
• Sleep Timer, see page 24
• SRS TS XT, see page 22
• Energy Saving, see page 27
• Dual l-ll, see page 23
• PIP, see page 21
• Auto Adjustment, see page 30
TV
Mode : Standard
Backlight 7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint G 50 R 50
Detailed Settings
Picture Options
Reset : OK
Move Enter Return
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l-ll : Mono
Move Enter Exit
Picture
Tools
English - 9
Plug & Play
When the TV is initially powered on, several basic settings
proceed automatically and subsequently. The following
settings are available.
1.
Press the POWER button on the remote control.
The message "Start Plug & Play." is displayed with "OK"
selected.
2. Select the appropriate language by pressing the ▲ or
▼
button.
Press the
ENTER button to confirm your choice.
3. Press the ◄ or ► button to select “Store Demo” or “Home Use”, then the ENTER button.
We recommend setting the TV to "Home Use" mode for the best picture in your home
environment.
"Store Demo" mode is only intended for use in retail environments.
If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use”
(Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and
hold the
MENU button on the TV for 5 seconds
4. The message "Check antenna input." is displayed with "OK" selected.
Press the ENTER button.
Please check that the antenna cable is connected correctly.
5. Select the appropriate area by pressing the ▲ or ▼ button.
Press the ENTER button to confirm your choice.
6.
The "Auto Store" menu is displayed with the "Start" selected. Press the
ENTER button.
The channel search will start and end automatically.
After all the available channels are stored, the "Clock Set" menu appears.
Press the ENTER button at any time to interrupt the memorization process.
7. Press the ENTER button.
Select the "Month", "Day", "Year", "Hour", "Minute" or "am/pm" by pressing the ◄ or ► button.
Set the "Month", "Day", "Year", "Hour", "Minute" or "am/pm" by pressing the ▲ or ▼ button.
You can also set the “Month”, “Day”, “Year”, “Hour” and "Minute" by pressing the number buttons
on the remote control.
8. Press the ENTER button to confirm your setting. The message “Enjoy your viewing” is displayed.
When you have finished, press the
ENTER button.
Even if the ENTER button is not pressed, the message will automatically disappear after
several seconds.
Language
Area
Auto Store
Clock Set
: Select your language.
: Select your area.
: Automatically scans for and stores channels available in the local area.
: Sets the current time for the TV clock.
Plug & Play
Start Plug & Play.
OK
Enter
English - 10
If you want to reset this feature...
Press the MENU button to display the menu.
1.
Press the ▲ or ▼ button to select "Setup" then press the
ENTER button.
TV
Plug & Play
Language : English
Time
Melody : Off
Entertainment : Off
Energy Saving : Off
PIP
2. Press the ENTER button again, to select "Plug & Play".
For further details on setting up options, refer to the page 10.
The “Plug & Play” feature is only available in the TV mode.
➣
Move Enter Return
Storing Channels Automatically
You can scan for the frequency ranges available to you (and
availability depends on your area).
Automatically allocated programme numbers may not correspond
to actual or desired programme numbers. However, you can sort
numbers manually and clear any channels you do not wish to
watch.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2. Press the ENTER button to select "Area".
3. Select the appropriate area by pressing the ▲ or ▼ button.
Press the ENTER button to confirm your choice.
4. Press the ▲ or ▼ button to select "Auto Store", then press the ENTER button.
5.
Press the ENTER button.
The TV will begin memorizing all of the available channels.
➣
➣
Press the
ENTER button at any time to interrupt the memorization process and return to the
"Channel" menu.
After all the available channels are stored, the "Sort" menu appears. (refer to page 14)
6.
TV
Area : Asia/W.Europe
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move Enter Return
Setup
Channel
English - 11
Storing Channels Manually
You can store television channels, including those received
via cable networks.
When storing channels manually, you can choose:
♦ Whether or not to store each of the channels found.
♦ The programme number of each stored channel which you wish
TV
Area : Asia/W.Europe
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
to identify.
Press the MENU button to display the menu.
1.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Manual Store", then press
the ENTER button.
3. Select the required option by pressing the ▲ or ▼ button,
Move Enter Return
TV
Programme : P 1
Colour System : Auto
Sound System : BG
Channel : S 6
Search : 140 MHz
Store : ?
then press the ENTER button.
4. When you are satisfied with your setting, press the
ENTER button.
Press the EXIT button to exit.
5.
Move Enter Return
♦ Programme (Programme number to be assigned to a channel)
− Press the ▲ or ▼ button until you find the correct number.
You can also select the channel number directly by pressing the numeric buttons (0~9).
Colour System: Auto/PAL/SECAM/NTSC4.43/NTSC3.58
♦
− Press the ▲ or ▼ button to select the required colour standard.
Sound System: BG/DK/I/M
♦
− Press the ▲ or ▼ button to select the required sound standard.
Channel (When you know the number of the channel to be stored)
♦
− Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).
− Press the ► button, then press the ▲ or ▼ button to select the required number.
You can also select the channel number directly by pressing the numeric buttons (0~9).
If there is abnormal sound or no sound, re-select the sound standard required.
Search (When you do not know the channel numbers)
♦
− Press the ▲ or ▼ button to start the search.
− The tuner scans the frequency range until the first channel or the channel that you selected is
received on the screen.
Store (When you store the channel and associated programme number)
♦
− Set to "OK" by pressing the ENTER button.
Channel mode
− P (Programme mode): When completing tuning, the broadcasting stations in your area have been
assigned to position numbers from P00 to P99. You can select a channel by entering the position
number in this mode.
− C (Air channel mode): You can select a channel by entering the assigned number to each air
broadcasting station in this mode.
− S (Cable channel mode): You can select a channel by entering the assigned number for each
cable channel in this mode.
Channel
Manual Store
English - 12
Adding / Locking Channels
Using the Channel Manager, you can conveniently lock or add
channels.
Press the MENU button to display the menu.
1.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Channel Manager",
then press the ENTER button.
♦ Adding channels
Using the Channel List, you can add channels.
3. Select "Channel List" by pressing the ENTER button.
4. Move to the ( ) field by pressing the ▲, ▼, ◄ or ►
button, select a channel to be added, and press the
ENTER button to add the channel.
If you press the
➣
next to the channel disappears and the channel is not
added.
"
" is active when "Child Lock" is selected to "On".
➣
♦ Locking channels
This feature allows you to prevent unauthorized users, such
as children, from watching unsuitable programmes by muting
out video and audio.
5.
Press the ▲ or ▼ button to select "Child Lock", then press
the ENTER button.
6.
Select "On" by pressing the ▲ or ▼ button, then press the
ENTER button.
7.
Press the ▲ or ▼ button to select "Channel List",
then press the ENTER button.
8. Move to the " " field by pressing the ▲, ▼, ◄ or ► button,
select a channel to be locked, and press the ENTER
button.
If you press the
➣
next to the channel disappears and the channel lock is
cancelled.
A blue screen is displayed when "Child Lock" is activated.
➣
9.
Press the EXIT button to exit.
➣
Select "On" or "Off" in "Child Lock" to easily turn the
channels which selected on " " to be active or inactive.
ENTER button again, the ( ) symbol
ENTER button again, the ( ) symbol
TV
Area : Asia/W.Europe
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move Enter Return
TV
Channel List
Child Lock : Off
Move Enter Return
P 1 C3
Prog.
0 C--
1 C3
2 BBC 1
3 C74
4 C75
5 C76
6 S3
7 S4
8 S6
9 S7
Add Lock
Move Enter
Page Return
Channel
Channel Manager
Channel List
1 / 10
You can select these options by simply pressing the CH LIST
button on the remote control.
English - 13
Sorting the Stored Channels
This operation allows you to change the programme numbers
of the stored channels.
This operation may be necessary after using the auto store.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Sort", then press the
ENTER button.
3. Select the channel number that you wish to change by
pressing the ▲ or ▼ button repeatedly.
Press the ENTER button.
The selected channel number and name are moved to
➣
right side.
4. Press the ▲ or ▼ button to move to the position in which you
would like to change and then press the ENTER button.
➣
The selected channel is exchanged with the one
previously stored to the chosen number.
5.
Repeat steps 3 to 4 for another channel to be sorted.
6.
Press the EXIT button to exit.
Assigning Channels Names
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed,
allowing you to assign new names.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Name", then press the
ENTER button.
3. If necessary, select the channel to be assigned to a new
name by pressing the ▲ or ▼ button. Press the ENTER
button.
The selection bar is displayed around the name box.
➣
4.
To...
Select a letter, number or symbol
Move on the next letter
Move back the previous letter
Confirm the name
➣
The following characters are available: Letters of the alphabet (A~Z) / Numbers
(0~9) / Special characters (+, -, *, /, space)
5.
Repeat steps 3 to 4 for each channel to be assigned to a new name.
Press the EXIT button to exit.
6.
Then...
Press the ▲ or ▼ button
Press the ► button
Press the ◄ button
ENTER button
Press the
TV
Area : Asia/W.Europe
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move Enter Return
TV
Prog. Ch. Name
0 C-- ---- 1 C23 -----
2 S06 ---- 3 S07 ---- 4 S09 ---- 5 S12 ---- 6 S13 ---- 7 S14 ---- 8 S17 ---- 9 C21 ----
Move Enter Return
TV
Area : Asia/W.Europe
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move Enter Return
TV
Prog. Ch. Name
0 C-- -----
1 C23 -----
2 S06 ---- 3 S07 ---- 4 S09 ---- 5 S12 ---- 6 S13 ---- 7 S14 ---- 8 S17 ---- 9 C21 ----
Move Enter Return
Channel
Channel
Sort
Name
English - 14
Fine Tuning Channel Reception
Use fine tuning to manually adjust a particular channel for
optimal reception.
1.
Use the number buttons to directly select the channel that
you want to fine tune.
2. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
3. Press the ▲ or ▼ button to select "Fine Tune", then press
the ENTER button.
4. Press the ◄ or ► button to adjust the fine tuning.
Press the ENTER button.
Press the EXIT button to exit.
5.
Fine tuned channels that have been saved are marked
➣
with an asterisk "
number in the channel banner. And the channel number
" on the right-hand side of the channel
*
turns red.
To reset the ne-tuning, select "Reset" by pressing the
➣
▲
or ▼ button and then press the ENTER button.
TV
Area : Asia/W.Europe
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move Enter Return
P 1
Adjust Save Return
Channel
Fine Tune
0
Reset
English - 15
Changing the Picture Standard
You can select the type of picture which best corresponds to
your viewing requirements.
Press the MENU button to display the menu.
1.
Press the ENTER button, to select "Picture".
2. Press the ENTER button again, to select "Mode".
3. Press the ▲ or ▼ button to select the desired picture effect.
Press the ENTER button.
4. Press the EXIT button to exit.
♦ Dynamic: Selects the picture for high-definition in a bright
♦ Standard:
Movie: Selects the picture for comfortable display in a
♦
The Picture mode must be adjusted separately for each
input source.
You can also press the P.MODE button on the remote
O
control to select one of the picture settings.
room.
Selects the picture for optimum display in a
normal environment.
dark room.
TV
Mode : Standard
Backlight 7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint G 50 R 50
Detailed Settings
Picture Options
Reset : OK
Move Enter Return
TV
Mode : Standard
Backlight 7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint G 50 R 50
Detailed Settings
Picture Options
Reset : OK
Move Enter Return
Picture
Picture
Dynamic
Standard
Movie
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select "Picture Mode".
3. Press the ◄ or ► button to select the required option.
4. Press the EXIT or TOOLS button to exit.
English - 16
Tools
Anynet+ (HDMI-CEC)
Picture Mode ◄ Standard ►
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l-ll : Mono
Move Adjust Exit
Adjusting the Custom Picture
Your set has several settings which allow you to control
picture quality.
1.
To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(On page 16)
2. Press the ▲ or ▼ button to select a particular item. Press the
TV
Mode : Standard
Backlight 7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint G 50 R 50
Detailed Settings
Picture Options
Reset : OK
ENTER button.
3. Press the ◄ or ► button to decrease or increase the value of
a particular item. Press the ENTER button.
4. Press the EXIT button to exit.
♦ Backlight: Adjusts the screen brightness by adjusting the
LCD backlight brightness. (0~10)
♦ Contrast:
Adjusts the lightness and darkness between
Move Enter Return
▲
Backlight
▼
Move Adjust Return
objects and the background.
♦
Brightness: Adjusts the brightness of the whole screen.
♦ Sharpness:
Adjusts the outline of objects to either
sharpen them or make them more dull.
♦
Colour: Adjusts the colours, making them lighter or
darker.
♦ Tint:
Adjusts the colour of objects, making them more red or
green for a more natural look.
The adjusted values are stored according to the selected Picture mode.
In PC mode, you can only make changes to "Backlight", "Contrast" and "Brightness". (26, 32, 37 inch)
In PC mode, you can only make changes to "Contrast" and "Brightness". (40 inch)
TV, AV1, AV2, S-Video modes of the PAL system, you cannot use the "Tint" Function.
You can return to the factory defaults picture settings by selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory Defaults" on page 18)
Picture
7
Conguring Detailed Settings on the Picture
You can set detailed picture settings.
1. Press the MENU button to display the menu.
Press the
ENTER button, to select "Picture".
2. Press the ENTER button to select “Mode”.
Press the ▲ or ▼ button to select “Standard” or “Movie”, then
press the
ENTER button.
3. Press the ▲ or ▼ button to select "Detailed Settings", then
press the ENTER button.
4. Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.
5. When you are satisfied with your setting, press the
ENTER button.
6. Press the EXIT button to exit.
"Detailed Settings" is available in "Standard" or "Movie"
➣
mode.
In PC mode, you can only make changes to
➣
“Dynamic Contrast”, “Gamma” and “White Balance” from
among the “Detailed Settings” items.
English - 17
TV
Mode : Standard
Backlight 7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint G 50 R 50
Detailed Settings
Picture Options
Reset : OK
Move Enter Return
TV
Black Adjust : Off
Dynamic Contrast
Gamma : 0
Colour Space
White Balance
Flesh Tone : 0
Edge Enhancement : On
Move Enter Return
Picture
Detailed Settings
: Medium
: Native
♦ Black Adjust: Off/Low/Medium/High
You can directly select the black level on the screen to adjust the screen depth.
♦ Dynamic Contrast: Off/Low/Medium/High
You can adjust the screen contrast so that the optimal contrast is provided.
♦ Gamma: -3 ~ +3
You can adjust the Primary Colour (Red, Green, Blue) Intensity.
Press the ◄ or ► button until you reach the optimal setting.
♦ Colour Space: Auto/Native/Custom
Colour space is a Colour matrix composed of red, green and blue colours.
Select your favourite Colour space to experience the most natural Colour.
♦ Auto: Auto Color Space automatically adjusts to the most natural color tone based on program
sources.
Native: Native Color Space offers deep and rich color tone.
♦
♦ Custom: Adjusts the color range to suit your preference.
Customizing the Colour Space
Colour: Red/Green/Blue/Yellow/Cyan/Magenta
Adjusts the Colour range to suit your preference.
“Colour” is available when “Colour Space” is set to “Custom”.
Press the ▲ or ▼ button to select “Red”, “Green”, “Blue”, “Yellow”, “Cyan” or “Magenta”.
Press the
ENTER button.
Red/Green/Blue: In "Colour", you can adjust the RGB values for the selected colour.
Press the ▲ or ▼ button to select "Red", "Green" or "Blue" to change it. Press the
button.
ENTER
Press the ◄ or ► button to decrease or increase the value of a particular item.
Press the
ENTER button.
Reset: Resets the colour space to the default values.
♦ White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset
You can adjust the colour temperature for more natural picture colours.
R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the
adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.
Flesh Tone: -15 ~ +15
♦
You can emphasize the pink 'flesh tone' in the picture.
Press the ◄ or ► button until you reach the optimal setting.
Changing the adjustment value will refresh the adjusted screen.
♦ Edge Enhancement: Off/On
You can emphasize object boundaries in the picture.
Resetting the Picture Settings to the Factory Defaults
You can return to the factory defaults picture settings.
To select the desired picture effect, follow the
1.
"Changing the Picture Standard" instructions number 1 to 3
on page 16.
2. Press the ▲ or ▼ button to select "Reset", then press the
ENTER button.
3. Press the ▲ or ▼ button to select "OK" or "Cancel".
Press the ENTER button.
4. Press the EXIT button to exit.
The "Reset" will be set for each Picture mode.
English - 18
TV
Mode : Standard
Backlight 7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint G 50 R 50
Detailed Settings
Picture Options
Reset : OK
Move Enter Return
Picture
OK
Cancel
Changing the Picture Options
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2. Press the ▲ or ▼ button to select “Picture Options”, then
press the ENTER button.
3. Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.
TV
Mode : Standard
Backlight 7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint G 50 R 50
Detailed Settings
Picture Options
Reset : OK
4. When you are satisfied with your setting, press the
ENTER button.
5.
Press the EXIT button to exit.
➣
In PC mode, you can only make changes to the
“Colour Tone” and “Size” from among the items in “Picture
Options”.
Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2
♦
Move Enter Return
TV
Picture Options
Colour Tone : Normal
Size : 16:9
Digital NR : Auto
DNle : Off
HDMI Black Level
Blue Only Mode : Off
You can select the most comfortable colour tone to your eyes.
The adjusted values are stored according to the selected
➣
Picture mode.
“Warm1” or “Warm2” is only activated when the picture mode is "Movie".
➣
Size: 16:9/Wide Zoom/Zoom/4:3/Just Scan
♦
Move Enter Return
You can select the picture size which best corresponds to your viewing requirements.
♦ 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
♦ Wide Zoom: Magnify the size of the picture more than 4:3.
♦ Zoom
: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
♦ 4:3: This is the default setting for a video movie or normal broadcasting.
♦ Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i)
or Component (1080i) signals are input.
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
➣
Settings can be adjusted and stored for each external device you have connected to an input of
➣
the TV.
Temporary image retention may occur when viewing a static image on the set for more than two
➣
hours.
Wide Zoom
➣
: Move the screen up/down using the ▲ or ▼ button after selecting the by
pressing the ► or ENTER button.
Zoom
➣
: Select by pressing the ◄ or ►button.
Use the ▲ or ▼ button to move the picture up and down. After selecting
use the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction.
When Double (
➣
➣
After selecting “Just Scan” in HDMI (1080i) or Component (1080i) mode:
, ) mode has been set in PIP, the Picture Size cannot be set.
Select by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER button.
You can initialize the setting.
Picture
: Normal
,
O You can select these options by simply pressing the P.SIZE
button on the remote control.
English - 19
♦
Digital NR: Off/Low/Medium/High/Auto
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction
feature to help reduce any static and ghosting that may appear on the screen.
When the signal is weak, select one of the other options until the best picture is displayed.
♦
DNIe: Off/Demo/On
This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you
can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the
applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function,
you can view the difference in the visual quality.
DNIe™ (Digital Natural Image engine)
This feature brings you more detailed image with 3D noise reduction, detail enhancement,
contrast enhancement and white enhancement. New image compensation Algorithm gives
brighter, clearer, more detailed image to you. DNIe™ technology will fit every signal into your eyes.
“DNIe” is only available in “Dynamic” mode.
♦ HDMI Black Level: Normal/Low
You can select the black level on the screen to adjust the screen depth.
This function is active only when the external input connects to HDMI(RGB signals).
♦ Blue Only Mode: Off/On
This function is for AV device measurement experts. This function displays the blue signal only by
removing the red and green signals from the video signal so as to provide a Blue Filter effect that is
used to adjust the Colour and Tint of video equipment such as DVD players, Home Theaters, etc.
Using this function, you can adjust the Colour and Tint to preferred values appropriate to the signal
level of each video device using the Red/Green/Blue/Cyan/Magenta/Yellow Colour Bar Patterns,
without using an additional Blue Filter.
“Blue Only Mode” is available when the picture mode is set to “Movie” or “Standard”.
English - 20
Viewing the Picture In Picture (PIP)
You can display a sub picture within the main picture of set
programme or video input. In this way, you can watch the
TV
picture of set programme or video input from any connected
equipment while watching the main picture.
Press the MENU button to display the menu.
1.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "PIP", then press the
ENTER button.
3. Select the required option by pressing the ▲ or ▼ button, then
TV
press the ENTER button.
4. When you are satised with your setting, press the
ENTER button.
5. Press the EXIT button to exit.
You may notice that the picture in the PIP window becomes
➣
slightly unnatural when you use the main screen to view a
game or karaoke.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “PIP”, then press the
ENTER button.
3. Press the ▲ or ▼ button to select a particular item.
4. Press the ◄ or ► button to select the required option.
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
PIP
5. Press the EXIT or TOOLS button to exit.
Move Enter Exit
PIP: On/Off
♦
You can activate or deactivate the PIP function.
Main picture Sub picture
Component 1, 2 TV, AV1, AV2
PIP On
Source : TV
Size :
Position :
Programme : P1
HDMI 1, 2, 3 TV, AV1, AV2
PC TV, AV1, AV2
Plug & Play
Language : English
Time
Melody : Off
Entertainment : Off
Energy Saving : Off
PIP
Move Enter Return
PIP : On
Source : TV
Size :
Position :
Programme : P1
Move Enter Return
Setup
PIP
Tools
PIP
Source
♦
You can select a source of the sub-picture.
Size:
♦
/ /
Move Adjust Return
You can select a size of the sub-picture.
If main picture is in "HDMI" mode, "Size" is available.
➣
Position:
♦
/ / /
You can select a position of the sub-picture.
➣
♦
Programme
In Double (
, ) mode, "Position" cannot be selected.
You can select a channel of the sub-picture only when the "Source" is set to "TV".
English - 21
Sound Features
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
ENTER button.
2. Select the required option by pressing the ▲ or ▼ button,
TV
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
TV Speaker : On
Sound Select : Main
Sound
then press the ENTER button.
3. When you are satisfied with your setting, press the ENTER
button.
4. Press the EXIT button to exit.
♦ Mode: Standard/Music/Movie/Speech/Custom
You can select the type of special sound effect to be used
when watching a given broadcast.
Easy Setting
1. Press the TOOLS button on the remote control.
Move Enter Return
Tools
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode ◄ Custom ►
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l-ll : Mono
2. Press the ▲ or ▼ button to select "Sound Mode".
3. Press the ◄ or ► button to select the desired sound mode.
4. Press the EXIT or TOOLS button to exit.
Move Adjust Exit
♦ Equalizer: Balance/100Hz/300Hz/1kHz/3kHz/10kHz
The sound settings can be adjusted to suit your personal
preferences.
➣
If you make any changes to these settings, the sound
TV
R
Equalizer
mode is automatically switched to "Custom".
L
Balance 100Hz 300Hz 1kHz 3kHz 10kHz
Move Adjust Return
♦ SRS TS XT: Off/On
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel
content over two speakers. TruSurround delivers a compelling, virtual surround sound experience
through any two-speaker playback system, including internal television speakers. It is fully
compatible with all multichannel formats.
Press the SRS button on the remote control to select "Off"
O
or "On".
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select "SRS TS XT".
3. Press the ◄ or ► button to select the "Off" or "On".
4. Press the EXIT or TOOLS button to exit.
TruSurround XT, SRS and Symbol are trademarks of SRS Labs,
Inc.TruSurround XT technology is incorporated under license from
SRS Labs, Inc.
English - 22
Tools
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT ◄ Off ►
Energy Saving : Off
Dual l-ll : Mono
Move Adjust Exit
♦ Auto Volume: Off/On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume
every time the channel is changed. This feature lets you automatically adjust the volume of the
desired channel by lowering the sound output when the modulation signal is high or by raising the
sound output when the modulation signal is low.
♦ TV Speaker: Off/On
If you want to hear the sound through separate speakers, cancel the internal amplifier.
The +, - and MUTE buttons do not operate when the "TV Speaker" is set to "Off".
➣
➣
When “TV Speaker” is set to “Off”, you can operate only “Sound Select” (in PIP mode) in Sound
menu.
♦ Sound Select: Main/Sub
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
− Main: Used to listen to the sound of the main picture.
− Sub: Used to listen to the sound of the sub picture.
Selecting the Sound Mode
You can set the sound mode in the "Tools" menu.
When you set to "Dual I-II", the current sound mode is
displayed on the screen.
1.
Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “Dual I-II".
3. Press the ◄ or ► button to select required option.
4. Press the ENTER button.
A2
Stereo
NICAM
Stereo
Audio Type Dual
Mono MONO
Stereo STEREO
Dual DUAL
Mono MONO
Stereo MONO
Dual
MONO
↔
1 ↔
↔
↔
DUAL
1/2
MONO
DUAL
2
STEREO
DUAL
1
2
Default
Automatic
change
DUAL 1
Automatic
change
DUAL 1
If the stereo signal is weak and an automatic switching occurs,
then switch to the Mono.
This function is only activated in stereo sound signal. It is
deactivated in mono sound signal.
This function is only available in TV mode.
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l-ll ◄ Mono ►
Move Adjust Exit
Tools
Connecting Headphones (Sold separately)
You can connect a set of headphones to your set if you wish to
watch a TV programme without disturbing the other people in the
room.
➣
When you insert the head set jack into the corresponding port, you
can operate only "Auto Volume" and "Sound Select"(in PIP mode) in
Sound menu.
➣
Prolonged use of headphones at a high volume may damage your
hearing.
You will not receive sound from the speakers when you connect headphones to the system.
➣
The headphone volume and TV volume are adjusted differently.
➣
English - 23
TV Side Panel
Setting and Displaying the Current Time
You can set the TV’s clock so that the current time is
displayed when you press the INFO button. You must also set
the time if you wish to use the automatic On/Off timers.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
TV
Plug & Play
Language : English
Time
Melody : Off
Entertainment : Off
Energy Saving : Off
PIP
ENTER button.
2. Press the ▲ or ▼ button to select "Time", then press the
ENTER button.
3. Press the ENTER button to select "Clock Set".
4.
To... Press the...
Move to "Month", "Day", "Year", "Hour"
"Minute" or "am/pm"
Set the "Month", "Day", "Year", "Hour"
"Minute" or "am/pm"
Confirm the setting
◄ or ► button.
▲ or ▼ button.
ENTER button.
5. Press the EXIT button to exit.
Move Enter Return
TV
Month01Day
p
01
q
Hour00Minute
12
Move Adjust Return
If you disconnect the power cord, you have to set the clock again.
You can also set "Year", "Month", "Day", "Hour" and "Minute" by pressing the number buttons on
the remote control.
Setting the Sleep Timer
You can select a time period of between 30 and 180 minutes
after which the television automatically switches to standby
mode.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Time", then press the
ENTER button.
3. Press the ▲ or ▼ button to select "Sleep Timer", then press
the ENTER button.
4. Press the ▲ or ▼ button repeatedly until the desired time
appears (Off, 30, 60, 90, 120, 150, 180).
Press the ENTER button.
5.
Press the EXIT button to exit.
The TV automatically switches to standby mode when the
timer reaches 0.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “Sleep Timer”.
3. Press the ◄ or ► button to select the minute.
4. Press the EXIT or TOOLS button to exit.
TV
Plug & Play
Language : English
Time
Melody : Off
Entertainment : Off
Energy Saving : Off
PIP
Move Enter Return
TV
Clock Set : 12 : 00 am
Sleep Timer :
Timer 1 :
Timer 2 :
Timer 3 :
Move Enter Return
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer ◄ Off ►
SRS TS XT : Off
Energy Saving : Off
Dual l-ll : Mono
Tools
Setup
Clock Set
Setup
Time
Off
30
60
90
120
150
180
Year
2008
am/pm
am
English - 24
Move Adjust Exit
Switching the Television On and Off Automatically
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Time", then press the
ENTER button.
TV
Plug & Play
Language : English
Time
Melody : Off
Entertainment : Off
Energy Saving : Off
PIP
Setup
3. Press the ▲ or ▼ button to select "Timer 1", "Timer 2",
"Timer 3", then press the ENTER button.
Three different On/Off Timer Settings can be made.
You must set the clock first.
➣
4. Press the ◄ or ► button to select the required item below.
Press the ▲ or ▼ button to adjust to the setting satisfied.
♦ On Time: Select hour, minute, am/pm and "On"/"Off". (To
activate timer with the setting satisfied, set to
"On".)
♦ Off Time: Select hour, minute, am/pm and "On"/"Off". (To
activate timer with the setting satisfied, set to
"On".)
Move Enter Return
TV
On Time
5
:
00
00 am
6
Off Time
:
00 am
00
Repeat
Once
Volume
10
► Move Adjust Return
Timer 1
Programme
01
♦ Repeat: Select "Once", "Everyday", "Mon~Fri", "Mon~Sat", or "Sat~Sun".
♦ Volume: Select the desired turn on volume level.
♦ Programme: When the On Timer is active, you can turn on a specific channel.
You can set the hour, minute and Programme directly by pressing the number buttons on the remote
control.
Auto Power Off
When you set the timer On, the TV will eventually turn off, if no controls are operated for 3 hours
after the TV was turned on by timer. This function is only available in timer On mode and prevents
overheating, which may occur if a TV is on for too long time.
Choosing Your Language
When you start using your set for the first time, you must
select the language which will be used for displaying menus
and indications.
Press the MENU button to display the on-screen menu.
1.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Language", then press
the ENTER button.
3. Select a particular language by pressing the ▲ or ▼ button
repeatedly.
Press the ENTER button.
4. Press the EXIT button to exit.
TV
Plug & Play
Language : English
Time
Melody : Off
Entertainment : Off
Energy Saving : Off
PIP
Move Enter Return
Setup
Off
Off
English - 25
Melody / Entertainment / Energy Saving
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER button.
2. Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.
TV
Plug & Play
Language : English
Time
Melody : Off
Entertainment : Off
Energy Saving : Off
PIP
Setup
3. When you are satisfied with your setting, press the
ENTER button.
4. Press the EXIT button to exit.
Move Enter Return
♦ Melody: Off/Low/Medium/High
The TV power on/off melody sound can be adjusted.
The Melody does not play
➣
- When no sound is output from the TV because the MUTE button has been pressed
- When no sound is output from the TV because the (Volume) button has been pressed
- When the TV is turned off by Sleep Timer function.
♦ Entertainment: Off/Sports/Cinema/Game
The “Entertainment” mode enables you to select the optimal display and sound for sports, cinema
and games.
- Off: Switch the "Entertainment" function off.
- Sports: Provides the optimal picture and sound quality for sports. You can enjoy more thrilling
Colour and sound.
- Cinema: Provides the optimal picture and sound quality for cinema. You can experience a richer
picture and enhanced sound.
- Game: Provides the optimal picture and sound quality for games. This mode accelerates the
playing speed when using an external game console connected to the TV.
If you set any of the three “Entertainment” modes to On, the settings will be locked and can not
➣
be adjusted. If you want to make Picture and Sound mode adjustments, the “Entertainment”
mode must be turned off.
➣
The “Entertainment” settings are saved for each input source.
➣
If you set any of the three “Entertainment” modes to On, “SRS TS XT” function is not available.
O You can press the E.MODE button on the remote control
repeatedly to change the “Entertainment” setting.
English - 26
♦ Energy Saving: Off/Low/Medium/High/Auto
This feature adjusts the screen brightness depending on the surrounding lighting conditions.
− Off: Turns off the energy saving function.
− Low: Sets the TV to low energy saving mode.
− Medium: Sets the TV to medium energy saving mode.
− High: Sets the TV to high energy saving mode.
− Auto: Automatically adjusts the brightness of the TV screen in accordance with the scenes.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “Energy Saving”.
3. Press the ◄ or ► button to select the "Off", "Low",
"Medium", "High" or "Auto".
4. Press the EXIT or TOOLS button to exit.
This function is not available in “PC” mode.(40 inch)
Selecting the Source
You can select among external sources connected to your
TV’s input jacks.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Input", then press the
ENTER button.
2. Press the ENTER button again, to select "Source List".
Available signal sources: TV, AV1, AV2, S-Video,
Component1, Component2, PC, HDMI1, HDMI2, HDMI3.
You can choose only those external devices that are
connected to the TV.
3. Select the required device by pressing the ▲ or ▼ button.
Press the ENTER button.
Press the SOURCE button on the remote control to toggle
O
between all the available source.
TV mode can be selected by pressing the TV button, number
buttons(0~9), and the P / button on the remote control.
Tools
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving ◄ Off ►
Dual l-ll : Mono
Move Adjust Exit
TV
Source List : TV
Edit Name
Anynet+(HDMI-CEC)
Move Enter Return
TV
TV
AV1 : ---AV2 : ---S-Video : ---Component1 : ---Component2 : ---PC : ---HDMI1 : ---HDMI2 : ---HDMI3 : ----
Move Enter Return
Input
Source List
You can also watch HDMI mode simply by pressing the HDMI
O
button on the remote control.
English - 27
Editing the Input Source Names
Name the device connected to the input jacks to make your
input source selection easier.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Input", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Edit Name", then press
the ENTER button.
3. Press the ▲ or ▼ button to select the device that you wish to
edit.
Press the ENTER button.
4. Press the ▲ or ▼ button to select the required device.
Press the ENTER button.
Press the EXIT button to exit.
5.
TV
Source List : TV
Edit Name
Anynet+(HDMI-CEC)
Move Enter Return
TV
AV1 : ----
AV2 : ----
S-Video : ----
Component1 : ----
Component2 : ----
PC : ----
HDMI1 : ----
HDMI2 : ----
HDMI3 : ----
Edit Name
Move Enter Return
Input
----
VCR
DVD
Cable STB
Satellite STB
PVR STB
AV Receiver
Game
q
English - 28
Setting up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The
actual screens on your PC may be different depending upon your particular
version of Windows and your particular video card. Even if your actual
screens look different, the same, basic set-up information will apply in almost
all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1.
First, click on "Control Panel" on the Windows start menu.
2. When the control panel window appears, click on "Appearance and Themes"
and a display dialog-box will appear.
3. When the control panel window appears, click on "Display" and a display
dialog-box will appear.
4. Navigate to the "Settings" tab on the display dialog-box.
The correct size setting (resolution): Optimum- 1360 X 768
If a vertical-frequency option exists on your display settings dialog box, the correct value is
"60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.
Display Modes
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The resolutions in the table are recommended.
D-Sub Input
Mode
IBM
VESA
HDMI/DVI Input
Mode
VESA
Resolution
640x350
720×400
640×480
640×480
640×480
800×600
800×600
800×600
1024×768
1024×768
1024×768
1360 x 768
Resolution
640×480
800×600
1024×768
1360 x 768
Horizontal
Frequency (kHz)
31.469
31.469
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
47.712
Horizontal
Frequency (kHz)
31.469
37.879
48.363
47.712
Vertical
Frequency (Hz)
70.086
70.087
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
60.015
Vertical
Frequency (Hz)
59.940
60.317
60.004
60.015
Pixel Clock
Frequency (MHz)
25.175
28.322
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
85.500
Pixel Clock
Frequency (MHz)
25.175
40.000
65.000
85.500
Sync Polarity
Sync Polarity
(H/V)
+/-
-/+
-/-
-/-
-/+/+
+/+
+/+
-/-
-/+/+
+/+
(H/V)
-/-
+/+
-/-
+/+
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
➣
➣
The interlace mode is not supported.
➣
The set might operate abnormally if a non-standard video format is selected.
➣
Separate and Composite modes are supported. SOG is not supported.
English - 29
Setting up the TV with your PC
Preset: Press the SOURCE button to select PC mode.
1.
Press the MENU button to display the menu.
Press the
2. Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.
3. When you are satisfied with your setting, press the
ENTER button.
4. Press the EXIT button to exit.
♦
Auto Adjustment
Auto adjustment allows the PC screen of set to self-adjust to
the incoming PC video signal. The values of fine, coarse and
position are adjusted automatically.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “Auto Adjustment”, then
ENTER button, to select "Picture".
press the ENTER button.
TV
Mode : Standard
Backlight 7
Contrast 95
Brightness 45
Sharpness 50
Auto Adjustment
Screen Adjustment
Detailed Settings
Picture Options
Reset : OK
Move Enter Return
Auto Adjustment in Progress
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
PIP
Auto Adjustment
Move Enter Exit
Picture
Please wait.
Tools
♦ Screen Adjustment:
Coarse/Fine
The purpose of picture quality adjustment is to remove or
reduce picture noise. If the noise is not removed by Finetuning alone, then adjust the frequency as best as possible
(coarse) and Fine-tune again. After the noise has been
reduced, re-adjust the picture so that it is aligned on the
center of screen.
Press the ▲ or ▼ button to select "Coarse" or "Fine", then
press the ENTER button.
Press the ◄ or ► button to adjust the screen quality.
Press the ENTER button.
Position
Adjust the PC’s screen positioning if it does not fit the TV
screen.
Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the ◄ or ► button to adjust the Horizontal-Position.
Press the ENTER button.
Image Reset
You can replace all image settings with the factory default
values.
English - 30
TV
TV
TV
Screen Adjustment
Coarse 50
Fine 34
Position
Image Reset
Move Enter Return
Position
Move Enter Return
Screen Adjustment
Coarse 50
Fine 34
Position
Image Reset
Move Enter Return
+
What is Anynet
Anynet+ is an AV network system that enables an easy-to-use AV interface for users by controlling
all connected AV devices through the Anynet+ menu when Samsung Electronics AV devices are
connected.
Connecting Anynet
The Anynet+ system supports AV devices supporting Anynet+ only.
Check if there is an Anynet+ mark on the AV device to be connected to the TV.
To directly connect to TV
TV
?
+
Devices
Anynet+ Device 1 Anynet+ Device 2 Anynet+ Device 3
Connect the [HDMI 1],
[HDMI 2] or [HDMI 3] jack on
the TV and the HDMI OUT jack
of the corresponding Anynet+
device using the HDMI cable.
HDMI Cable
To connect to Home Theater
TV
HDMI Cable
HDMI Cable
Connect only one receiver.
➣
You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support
➣
Anynet+ functions.
Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.
➣
Anynet+ supports up to 8 AV devices in total.
➣
HDMI Cable
Anynet+ Device 1 Anynet+ Device 2
Home Theatre
HDMI Cable
HDMI Cable
Anynet+ Device 3
HDMI Cable
1. Connect the [HDMI 1],
[HDMI 2] or [HDMI 3]
jack on the TV and the
HDMI OUT jack of the
corresponding Anynet+
device using the HDMI
cable.
2. Connect the HDMI IN jack
of the home theatre and
the HDMI OUT jack of the
corresponding Anynet+
device using the HDMI
cable.
English - 31
Setting Up Anynet
+
The following settings are to use Anynet+ functions.
Using the Anynet+ Function
1. Press The TOOLS button. Then Press the ENTER button
to select "Anynet+(HDMI-CEC)".
Press the ▲ or ▼ button to select "Setup", then press the
ENTER button.
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l-ll : Mono
2. Press the ENTER button to select "Anynet+ (HDMI-CEC)",
then press the
3. Press the ▲ or ▼ button to select "On", then press the
ENTER button.
➣
The "Anynet+ (HDMI-CEC)" function is enabled.
➣
If you select "Off", "Anynet+ (HDMI-CEC)" is disabled.
➣
When the "Anynet+ (HDMI-CEC)" function is disabled, all the
Anynet+ related operations are deactivated.
ENTER button.
Move Enter Exit
TV P9
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver :Off
Setup
Move Enter
Return
Anynet+ (HDMI-CEC)
Auto Turn Off
Searching Connections
Move Enter Return
Turning an Anynet+ Device Off Automatically when the TV is Turned Off
1. Press the ▲ or ▼ button to select "Auto Turn Off", then press
the
ENTER button.
2. Press the ▲ or ▼ button to select "Yes", then press the
ENTER button.
➣
The "Auto turn off" function is enabled.
➣
If you select "No", the "Auto turn off" function is cancelled.
Press the EXIT button to exit.
➣
The Select Device setting of the TV remote control is to be set
Anynet+ (HDMI-CEC)
Auto Turn Off
Searching Connections
Move Enter Return
to TV to use the Anynet+ function.
➣
If you set "Auto Turn Off" to "No", connected external devices
are also turned off when the TV is turned off. However, if the
device is recording, it may not be turned off.
Tools
Setup
: Off
: Off
Setup
: On
: Off
Off
On
No
Yes
English - 32
+
Scanning and Switching between Anynet
1. Press the TOOLS button. Then press the ENTER button to
select "Anynet+(HDMI-CEC)".
2. Press the ▲ or ▼ button to select "Select Device", then press
the ENTER button.
3. Press the ▲ or ▼ button to select to a particular device and
press the ENTER button. It is switched to the selected
device.
4. If you cannot find a device you want, press the ▲ or ▼ button
to select "Setup", then press the ENTER button.
5. Press the ▲ or ▼ button to select "Searching Connections",
then press the ENTER button.
The message "Configuring Anynet+ connection..." is
displayed. When searching devices completes, the connected
devices are listed in the Anynet+ menu.
Switching to the selected devices may take up to 2 minutes.
➣
You cannot cancel the operation during the switching
Devices
TV P9
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver :Off
Setup
Move Enter
Move Enter Return
Return
Setup
Anynet+ (HDMI-CEC)
Auto Turn Off
Searching Connections
: On
: Yes
operation.
The time required to scan for devices is determined by the
➣
number of connected devices.
When the device scan is complete, the number of found devices is not displayed.
➣
Although the TV automatically scans devices when it is turned on using the
➣
connected when the TV is on or under a specic circumstance are not displayed in the device list.
Move Enter Return
POWER button, devices
Therefore select "Searching Connections" menu to search devices.
If you have selected external input mode by pressing the
➣
Anynet+ function. Make sure to switch to an Anynet+ device by using the TOOLS button.
SOURCE button, you cannot use the
English - 33
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected
to the TV.
Anynet+ Menu Description
View TV Switches from Anynet+ to TV broadcast mode.
Select Device Your TV connects to the corresponding device.
Record Starts a recording. (This menu works only for a device supporting
Menu on Device Shows the menu of the connected device.
Device Operation Shows the play control menu of the connected device.
Receiver Sound is output through the receiver.
Setup You can set the environment for using Anynet+.
TV Remote Control Buttons Available in Anynet+ Mode
Device Type Operating Status Available Buttons
Anynet+ Device
Device with built-in Tuner
Audio Device When Receiver is activated
➣
The Anynet+ function only works when the remote control is set to TV.
➣
The
➣
You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices
only using the TV remote control.
The TV remote control may not work under certain conditions. In this case, re-select the Anynet+
➣
device.
The Anynet+ functions don’t operate for the products from other manufacturers.
➣
In Anynet+ mode, the colour buttons may not work properly.
➣
The
➣
button works only while in the recordable state.
, operations may differ depending on the device.
recording.)
Example. When a DVD Recorder is connected, the DVD Recorder’s
title menu appears.
Example. When a DVD Recorder is connected, the play control
menu of the DVD Recorder appears.
After switching to the
device, when the menu of
the corresponding device is
displayed on the screen.
After switching to the device,
while playing a file
After switching to the device,
when you are watching a TV
programme
Numeric buttons
▲/▼/◄/►/
Colour buttons EXIT button
P</>button
+/- button/
MUTE button
ENTER buttons
(Backward search)/
(Forward search)/
(Stop)/ (Play)
(Pause)
English - 34
Recording
You can make a recording of a TV programme using a recorder.
Press the button.
Recording begins. (Only when the Anynet+ enabled recording device is connected.)
The current TV programme is recorded in the Watching TV status. If you are watching video from
➣
another device, the video from the device is recorded.
You can also record the source streams by selecting "Record" after pressing the
➣
Before recording, check whether the antenna jack is properly connected to the recording device. For
➣
the antenna connection to the recording device, refer to its user manual.
TOOLS button.
Listening through a Receiver
You can listen to sound through a receiver instead of the TV speaker.
1. Press The TOOLS button. Then Press the ENTER button
to select "Anynet+(HDMI-CEC)".
Press the ▲ or ▼ button to select "Receiver", then press the
ENTER button.
2. Press the ◄ or ► button to select to "On", then press the
ENTER button.
Now you can listen to sound through the receiver.
3. Press the EXIT button to exit.
➣
When the receiver is set to On, you can listen to the TV sound
through the 2-channel receiver.
If the receiver is exclusively for a home theatre only
➣
(supporting audio only), it may not appear in the device list.
In case of a content with copyright problem, listening through the receiver may not properly operate.
➣
If there is a power interruption to the TV when the “Receiver” is set to “On” (by disconnecting the
➣
power cord or a power failure), the “TV Speaker” may be set to “Off” when you turn the TV on again.
(see page 23)
TV P9
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver :Off
Setup
Move Enter
Return
English - 35
Check Points before Requesting Service
Symptom Solution
Anynet+ does not
work.
I want to start
Anynet+.
I want to exit Anynet+. ■ Select View TV in Anynet+ menu.
The Connecting to
Anynet+ device…
message appears on
the screen.
The Anynet+ device
does not play.
The connected device
is not displayed.
The TV programme
cannot be recorded.
■ Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+
devices only.
■ Connect only one receiver.
■ Check if the Anynet+ device power cord is properly connected.
■ Check the Anynet+ device’s Video/Audio/HDMI cable connections.
■ Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
■ Check whether the TV remote control is in TV mode.
■ Check whether it is Anynet+ exclusive remote control.
■ Anynet+ doesn’t work at a certain condition. (Searching channels, Plug & Play,
etc.)
■ When connecting or removing the HDMI cable, please make sure to search
devices again or restart your TV.
■ Check if the Anynet+ Function of Anynet+ device is set on.
■ Check if the Anynet+ device is properly connected to the TV and check if the
Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu.
■ Press the TV button on the TV remote control to switch to TV. Then press the
TOOLS button to show the Anynet+ menu and select a menu you want.
■ Press the SOURCE button on the TV remote control and select a device other
than Anynet+ devices.
■ Press any of P / , CH LIST, PRE-CH, and such to change to the
TV mode. (Note that the channel button operates only when a tuner-embedded
Anynet+ device is not connected.)
■ You cannot use the remote control when you are configuring Anynet+ or
switching to a view mode.
■ Use the remote control when the Anynet+ setting or switching to view mode is
complete.
You cannot use the play function when Plug & Play is in progress.
■ Check whether or not the device supports Anynet+ functions.
■ Check whether or not the HDMI cable is properly connected.
■ Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
■ Search Anynet+ devices again.
■ You can connect an Anynet+ device using the HDMI cable only. Some HDMI
cables may not support Anynet+ functions.
■ If it is terminated by an abnormal situation such as disconnecting the HDMI cable
or power cord or a power failure, please repeat the device scan.
Check whether the antenna jack on the recording device is properly connected.
English - 36
Teletext Feature
Most television stations provide written information services via Teletext. The index page of
the teletext service gives you information on how to use the service. In addition, you can select
various options to suit your requirements by using the remote control buttons.
For teletext information to be displayed correctly, channel reception must be stable. Otherwise,
information may be missing or some pages may not be displayed.
1. (exit)
Exit from the teletext display
2
6 (index)
Used to display the index (contents) page at any time while you
are viewing teletext.
3
8 (store)
Used to store the teletext pages.
4
4 (size)
Press to display the double-size letters in the upper half of the
screen. For lower half of the screen, press it again. To display
normal screen, press it once again.
5
5 (reveal)
Used to display the hidden text (answers to quiz games, for
example). To display normal screen, press it again.
6
/ (teletext on/mix)
Press to activate teletext mode after selecting the channel
providing the teletext service. Press it twice to overlap the teletext
with the current broadcasting screen.
7
0 (mode)
Press to select the teletext mode (LIST/FLOF). If you press it
in the LIST mode, it switches into the List save mode. In the
List save mode, you can save teletext page into list using the
8(store) button.
8
1 (sub-page)
Used to display the available sub-page.
9
2 (page up)
Used to display the next teletext page.
0
3 (page down)
Used to display the previous teletext page.
!
9 (hold)
Used to hold the display on a given page if the selected page is linked with several secondary
pages which follow on automatically. To resume, press it again.
@
7 (cancel)
Used to display the broadcast when searching for a page.
#
Coloure buttons (red/green/yellow/blue)
If the FASTEXT system is used by a broadcasting company, the different topics covered on a
teletext page are colour-coded and can be selected by pressing the coloured buttons. Press one
of them corresponding to the required. The page is displayed with other coloured information that
can be selected in the same way. To display the previous or next page, press the corresponding
coloured button.
1
2
3
4
5
6
7
8
9
0
!
@
#
You can change teletext pages by pressing the numeric buttons on
the remote control.
English - 37
The teletext pages are organized according to six categories:
Part Contents
A Selected page number.
B Broadcasting station identity.
C Current page number or search status.
D Date and time.
E Text.
F Status information.
FASTEXT information.
Teletext information is often divided between several pages
displayed in sequence, which can be accessed by:
♦ Entering the page number
♦ Selecting a title in a list
♦ Selecting a coloured heading (FASTEXT system)
Press the TV button to exit from the teletext display.
English - 38
Wall-Mount Adjustment (Sold separately) (depending on the model)
Once the auto wall mount is installed, your TV’s position can be easily adjusted.
TV Rear Panel Auto Wall-Mount
SERVICE Cable (Not supplied)
Entering the menu
1. Press the ▲, ▼, ◄ or ► button on your remote control.
The Wall Mount Adjustment screen is displayed.
➣
If the Wall Mount Adjustment screen is not displayed when
➣
clicking on a direction button while watching your TV, use
the menu to display that screen.
• Press the MENU butt on to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the
ENTER button.
• Press the ▲ or ▼ button to select “Wall-Mount
Adjustment”, then press the ENTER button.
TV
Plug & Play
Language : English
Time
Wall-Mount Adjustment
Melody : Off
Entertainment : Off
Energy Saving : Off
PIP
Move Enter Return
Setup
Remembering the Position
2. Adjust to the desired position using the ▲,▼,◄,► buttons.
If you press an arrow button when no OSD is displayed on
➣
the TV screen, the Adjustment screen appears.
➣
Press the
INFO button to reset. Press the ◄ or ► button to
select “Yes”, then press the ENTER button.
The position is initialized to the default setting.
3. Press the blue button.
Press the ▲ and ▼ buttons to select a save mode from either
Position 1, Position 2 or Position 3 in order to save the current
position.
To not save the current position, press the
➣
When selecting a save mode, you cannot use the Colour
➣
RETURN button.
buttons.
4. Press the ENTER button to save.
When Position1 is selected, the message "Current position
➣
saved as Position1" is displayed.
5. Press the ENTER button.
The saved Position appears on the left side of the OSD.
➣
English - 39
Wall-Mount Adjusment
Position 1 2 3
Adjust Save Center
Select a mode to Save.
Position1
Position2
Position3
Adjust Enter Return
INFO
Save
Moving to the remembered position
1. Complete Step 1 of “Entering the menu”.
2. Pressing a Colour (Red, Green, Yellow) button moves the auto
wall mount to the saved position.
You can move the wall mount to one of the 3 pre-set
➣
positions by pressing the Red (Position 1),
Green (Position 2) or Yellow (Position 3) buttons.
If you adjust the Position after moving to a pre-set position,
➣
the position display will disappear.
For installation, refer to the Installation Manual provided with the wall mount.
➣
For product installation and the installation and moving of the wall mount, make sure to consult a
➣
specialized installation company.
This installation manual is to be used when attaching the wall mount to a wall. When attaching to
➣
other building materials, please contact your nearest dealer.
The auto wall mount will not work when Anynet+ is operating.
➣
37 and 40 inch models are not compatible with the old electrically powered wall mount model
➣
(WMN5090A*).
Wall-Mount Adjusment
Position1
Position 1 2 3
Adjust Save Center
INFO
Using the Anti-Theft Kensington Lock (depending on the model)
The Kensington lock is a device used to physically fix the system when using it in a public place.
The appearance and locking method may differ from the illustration depending on the manufacturer.
Refer to the manual provided with the Kensington lock for proper use. The locking device has to be
purchased separately.
1.
Insert the locking device into the Kensington
slot on the LCD TV (Figure 1), and turn it in the
locking direction (Figure 2).
2. Connect the Kensington Lock cable.
3. Fix the Kensington Lock to a desk or a heavy
stationary object.
The location of the Kensington Lock may be
➣
different depending on its model.
Cable
Figure 2
Figure 1
<Optional>
English - 40
Troubleshooting: Before Contacting Service Personnel
No sound or picture.
Normal picture but no
sound.
Screen is black and power
indicator light blinks steadily.
No picture or black and
white picture.
Sound and picture
interference.
Blurred or snowy picture,
distorted sound.
Remote control malfunctions.
'Check signal cable.'
message is displayed.
On PC mode, 'Not Supported
Mode.' message is displayed.
The damaged picture appears
in the corner of the screen.
The 'Resets all settings to
the default values' message
appears.
The TFT LCD panel uses a panel consisting of sub pixels (3 133 440) which require sophisticated
technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will
have no impact on the performance of the product.
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the
Check the picture contrast and brightness settings.
Check the volume.
Check the volume.
Check whether the MUTE button has been pressed on the remote control.
Check if "TV Speaker" is on.
On your computer check; Power, Signal Cable.
The TV is using its power management system.
Move the computer’s mouse or press any key on the keyboard.
Adjust the colour settings.
Check that the broadcast system selected is correct.
Try to identify the electrical appliance that is affecting the set and move it
further away.
Plug your set into a different mains socket.
Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
Check that the signal cable is firmly connected to the PC or video sources.
Check that the PC or video sources are turned on.
Check the maximum resolution and the frequency of the video adaptor.
Compare these values with the data in the Display Modes.
If "Just Scan" is selected in some external devices, the damaged picture
may appear in the corner of the screen. This symptom is caused by external
devices, not TV.
This appears when you press and hold the
The product settings are reset to the factory defaults.
button on your set.
EXIT button for a while.
English - 41
Technical and Environmental Specications
Model Name
Screen Size (Diagonal)
PC Resolution
Sound
Output
Dimensions (WxDxH)
Body
With stand
Weight
With stand
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Stand Swivel
(Left / Right)
LA26A450C1 LA32A450C1
26 inch 32 inch
1360 X 768 @ 60 Hz 1360 X 768 @ 60 Hz
5W x 2 10W x 2
670 X 75 X 446 mm
670 X 216 X 500 mm
10 kg 13 kg
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
0
˚
800 X 79 X 522 mm
800 X 252 X 577 mm
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
-20˚ ~ 20˚
Model Name
Screen Size (Diagonal)
PC Resolution
Sound
Output
Dimensions (WxDxH)
Body
With stand
Weight
With stand
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Stand Swivel
(Left / Right)
LA37A450C1 LA40A450C1
37 inch 40 inch
1360 X 768 @ 60 Hz 1360 X 768 @ 60 Hz
10W x 2 10W x 2
916 X 82 X 598 mm
916 X 300 X 658 mm
18 kg 19 kg
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
-20˚ ~ 20˚ -20˚ ~ 20˚
990 X 82 X 636 mm
990 X 300 X 694 mm
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
English - 42
Model Name
Screen Size (Diagonal)
PC Resolution
Sound
Output
Dimensions (WxDxH)
Body
With stand
Weight
With stand
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Stand Swivel
(Left / Right)
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
For the power supply and Power Consumption, refer to the label attached to the product.
LA32A450C2 LA40A450C2
32 inch 40 inch
1360 X 768 @ 60 Hz 1360 X 768 @ 60 Hz
10W x 2 10W x 2
800 X 79 X 525 mm
800 X 252 X 577 mm
13 kg 19 kg
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
-20˚ ~ 20˚ -20˚ ~ 20˚
990 X 82 X 641 mm
990 X 300 X 694 mm
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
English - 43
Loading...