Samsung LA22C450E1M, LA26C450E1, LA32C450E1, LA22C450E1 User Manual

LCD TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.To receive more complete service, please register your product at

www.samsung.com/register

Model Serial No.

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and speciﬁcations may be changed without notice.

Still image warning

Avoid displaying still images (like jpeg picture ﬁles) or still image element (like TV programme logo, panorama or 4:3 image format, stock or news bar at screen bottom etc.) on the screen. Constant displaying of still picture can cause uneven wear of screen phosphor, which will affect image quality. To reduce risk of this effect, please follow below recommendations:

Avoid displaying the same TV channel for long periods.• Always try to display any image on full screen, use TV set picture format menu for best possible match.• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process.• Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.•

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in ﬁre or a problem with the product due to an increase in the internal temperature of the product.

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

✎

If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.

x

The appearance may differ depending on the product.

✎

Installation with a stand. Installation with a wall-mount.

10 cm

2

English

3

English

Contents

Getting Started

4

Connections

7

Basic Features

11

Advanced Features

20

4 Accessories 4 Viewing the Control Panel 5 Viewing the Remote Control 6 Connecting to an Antenna 6 Plug & Play (Initial Setup)

7 Connecting to an AV Device(LA26C450, LA32C450) 8 Connecting to an Audio Device (LA26C450, LA32C450) 9 Connecting to an AV Device (LA22C450) 10 Connecting to an Audio Device (LA22C450) 11 Changing the Input Source

11 How to Navigate Menu 11 Channel Menu 13 Picture Menu 15 Sound Menu 17 Setup Menu 19 Support Menu

20 Connecting to a PC (LA26C450, LA32C450) 20 Connecting to a PC (LA22C450) 22 Media Play 28 Anynet+

Other Information

31

t

This function can be used by

pressing the TOOLS button on the

remote control.

31 FM Transmitter Setup 33 Analogue Channel Teletext Feature 34 Installing the Wall Mount 35 Anti-Theft Kensington Lock 35 Securing the TV to the Wall 36 Troubleshooting 39 Speciﬁcations 40 Index

Check the Symbol!

Note One-touch button

Getting Started

Accessories

Please make sure the following items are included with your LCD T V. If any items are missing, contact your dealer.

✎

The items’ colours and shapes may vary depending on the models.

✎

Remote Control & Batteries (AAA x 2) y Owner’s Instructions y Warranty Card / Safety Guide (Not available in some locations) y

See separate guide for installation.

✎

FM Transmitter

▪

(LA26C450/LA32C450)

(Not available in some locations)

Wall Mount kit y

(LA22C450)

Viewing the Control Panel

The product colour and shape may vary depending on the model.

✎

Cleaning Cloth y Power Cord y

(M4 X L16)

Screws (3EA)

▪

Power IndicatorRemote control sensor

Speakers

P

(Power)

Power Indicator Blinks and turns off when the power is on and lights up in standby mode.

SOURCE

MENU Displays an on-screen menu, the OSD (on screen display), of your TV’s features.

-

z

Remote control sensor Aim the remote control towards this spot on the TV.

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power code.

VOL

E

+

Turns the TV on or off.

Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTERE button on the remote control.

Adjusts the volume. In the OSD, use the - VOL + buttons as you would use the ◄ and ► buttons on the remote control.

Changes the channels. In the OSD, use the ▼ and ▲ buttons on the remote control.

z

buttons as you would use the

4

English

5

01 Getting Started

English

Viewing the Remote Control

MEDIA.P

ABCD

HDMI

P . MODE

S.MODE

SLEEP

DUAL

E.SAVING

I-II

Turns the TV on and off. (P. 6)

Have direct access to channels.

Alternately selects Teletext, Double

Displays the main on-screen menu.

Views the Media play. (P. 22)

Quickly selects frequently used functions.

Selects on-screen menu items and changes

Returns to the previous menu. (P. 11)

Buttons in the Channel Manager,

Media Play menu, etc.

(: controls recording on Samsung recorders

Use these buttons in the Media Play and

with the Anynet+ feature)

or MiX.

Adjusts the volume.

(P. 11)

menu values.

Anynet+ modes.

Displays and selects the available video sources. (P. 10)

Returns to the previous channel.

Cut off the sound temporarily.

Changes channels.

Displays channel list on the screen. (P. 13)

Selects the HDMI mode directly.

Displays information on the TV screen. (P. 17)

Exit the menu. (P. 11)

S.MODE : Selects the sound mode. (P. 15) SLEEP : Setting the Sleep Timer. (P. 17) DUAL I-II: Selects the dual sound mode. (P. 16) P.MODE : Selects the picture mode. (P. 13) P.SIZE : Choose the picture size. (P. 14) E.SAVING : Selects the energy saving mode. (P. 13)

Installing batteries (Battery size: AAA)

NOTE

✎

Use the remote control within 23 feet from the TV.

x

Bright light may affect the performance of the remote

x

control. Avoid using nearby special fluorescent light or neon signs.

The colour and shape may vary depending on the model.

x

Getting Started

P

POWER

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.

Preset: Connecting the mains and antenna.

✎

VHF/UHF Antenna

or

Power Input

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in conﬁguring basic settings. Press the POWERP button. Plug & Play is available only when the Input source is set to TV.

Selecting a language

1

Selecting Store Demo

2

or Home Use

Selecting an area.

3

Selecting a channel The channel search will start automatically.

4

Setting the Clock

5

Viewing the HD

6

Connection Guide. Enjoy your TV.

Press the ▲ or ▼ button, then press the ENTERE button. Select the desired OSD (On Screen Display) language.

Press the ◄ or ► button, then press the ENTERE button.

Select the y Home Use mode. Store Demo Mode is for retail environments.

Return the unit’s settings from y Store Demo to Home Use (standard): Press the volume button on the TV. When the OSD volume is displayed, press and hold MENU for 5 sec.

Press the ▲ or ▼ button, then press the ENTERE button. Select the appropriate area.

For more information, refer to Channel → Auto Store.

Press the ✎ENTERE button at any time to interrupt the memorization process.

Press the ◄ or ► button, to select Day, Month, Year, Hour or Minute. Set these by pressing the ▲ or ▼ button.

The connection method for the best HD screen quality is displayed.

Press the ENTERE button.

Cable

ANT OUT

7

If You Want to Reset This Feature...

Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to change the PIN number, use the Change PIN function.

6

English

7

English

P

R PB Y

R-AUDIO-L

P

R PB Y

R-AUDIO-L

P

R PB Y

R-AUDIO-L

P

R PB Y

Connections

WR

W W

BGRR

BRG

WR

W R

BRG

WWR

R

B

Y

W W

BGRRWY

Connecting to an AV Device(LA26C450, LA32C450)

Using an HDMI / DVI Cable: HD connection (up to 1080p)

Available devices: DVD, Blu-ray player, HD cable box, HD satellite receiver (STB), cable box, satellite receiver (STB)

02 Connections

DVD

AUDIO OUT

DVI OUT

Red White

HDMI IN 1(DVI), 2, 3 / PC/DVI AUDIO IN

✎

DVD

HDMI OUT

When using an HDMI / DVI cable connection, you must use the y HDMI IN 1(DVI) jack. For the DVI cable connection, use a DVI to HDMI cable or DVI-HDMI (DVI to HDMI) adapter for video connection and the

PC/DVI AUDIO IN jacks for audio.

If an external device such as a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) supporting y a HDMI versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display/ no sound/ annoying ﬂicker/ abnormal colour).

If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. y If the version is older than 1.3, contact the provider of the corresponding device to conﬁrm the HDMI version and request an upgrade.

It is recommended you purchase an HDMI-certiﬁed cable. Otherwise, the screen may appear blank or a y connection error may occur.

Using a Component Cable: (up to 1080p), Using an Audio/Video Cable: (480i only)

Available devices: VCR, DVD, Blu-ray player, Cable Box, Satellite receiver

VIDEO OUT

AUDIO OUT

VCR

COMPONENT IN / AV IN 1 ✎: When connecting to AV IN 1, the colour of the AV IN 1 [Y/VIDEO] jack

(Green) does not match the colour of the video cable (Yellow). To obtain the best picture quality, the Component connection is recommended over the A/V connection.

✎

AUDIO OUT

COMPONENT OUT

Yellow Red White Red Blue Green

Blu-ray player

Connections

R-AUDIO-L

P

R PB Y

W R

W W

BGRR

Connecting to an Audio Device (LA26C450, LA32C450)

Using an Optical Cable (Digital) / Audio Cable (Analogue) Connection

Available devices: digital audio system, ampliﬁer, DVD home theatre

AUDIO IN

DVD

Home Theatre

Digital Audio

System

Red White

DIGITAL AUDIO OUT (OPTICAL)

✎

OPTICAL

When a digital audio system is connected to the y DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system.

5.1CH (channel) audio is available when the TV is connected to an external device supporting 5.1CH. y When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the TV y

is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / satellite receiver (Set-Top Box) and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) directly to an ampliﬁer or home theatre.

AUDIO OUT ✎: Connects to the audio input jacks on your ampliﬁer / DVD home theatre.

When connecting, use the appropriate connector. y When an audio ampliﬁer is connected to the y AUDIO OUT jacks: Decrease the volume of the TV and adjust the

volume level with the Ampliﬁer’s volume control.

8

English

9

English

02 Connections

Connecting to an AV Device (LA22C450)

P

R PB Y

R-AUDIO-L

P

R PB Y

R-AUDIO-L

P

R PB Y

R-AUDIO-L

P

R PB Y

WR

W W

BGRR

WWR

R

B

Y

BRG

WR

W R

BRG

W W

BGRRWY

Using an HDMI / DVI Cable: HD connection (up to 1080p)

Available devices: DVD, Blu-ray player, HD cable box, HD satellite receiver (STB), cable box, satellite receiver (STB)

DVD

Red White

DVD

HDMI OUT

AUDIO OUT

DVI OUT

HDMI(DVI)IN, PC/DVI AUDIO IN

✎

When using an HDMI / DVI cable connection, you must use the y HDMI(DVI)IN jack. For the DVI cable connection, use a DVI to HDMI cable or DVI-HDMI (DVI to HDMI) adapter for video connection and the

PC/DVI AUDIO IN jacks for audio.

If an external device such as a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) supporting y a HDMI versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display/ no sound/ annoying ﬂicker/ abnormal colour).

If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. y If the version is older than 1.3, contact the provider of the corresponding device to conﬁrm the HDMI version and request an upgrade.

It is recommended you purchase an HDMI-certiﬁed cable. Otherwise, the screen may appear blank or a y connection error may occur.

Using a Component Cable: (up to 1080p), Using an Audio/Video Cable: (480i only)

Available devices: VCR, DVD, Blu-ray player, Cable Box, Satellite receiver

VIDEO OUT

AUDIO OUT

VCR

COMPONENT IN / AV IN 1 ✎: When connecting to AV IN 1, the colour of the AV IN 1 [Y/VIDEO] jack

(Green) does not match the colour of the video cable (Yellow). To obtain the best picture quality, the Component connection is recommended over the A/V connection.

✎

AUDIO OUT

COMPONENT OUT

Yellow Red White Red Blue Green

Blu-ray player

Connections

R-AUDIO-L

P

R PB Y

W R

W W

BGRR

Connecting to an Audio Device (LA22C450)

Using an Optical Cable (Digital) / Audio Cable (Analogue) Connection

Available devices: digital audio system, ampliﬁer, DVD home theatre

AUDIO IN

DVD

Home Theatre

Headphones

Red White

DIGITAL AUDIO OUT (OPTICAL)

✎

OPTICAL

Digital Audio

System

When a digital audio system is connected to the y DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system.

5.1CH (channel) audio is available when the TV is connected to an external device supporting 5.1CH. y When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the TV y

is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / satellite receiver (Set-Top Box) and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) directly to an ampliﬁer or home theatre.

AUDIO OUT ✎: Connects to the audio input jacks on your ampliﬁer / DVD home theatre.

When connecting, use the appropriate connector. y When an audio ampliﬁer is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the y

volume level with the Ampliﬁer’s volume control.

Headphones

✎ H

: You can connect your headphones to the headphones output on your set. While the headphones

are connected, the sound from the built-in speakers will be disabled.

Sound function may be restricted when connecting headphones to the TV.

x

Headphone volume and TV volume are adjusted separately.

x

Input Cables (Sold Separately)

HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA

English

10

11

English

B

Changing the Input Source

MEDIA.P

HDMI

Source List

Use to select TV or other external input sources such as DVD / Blu-ray players / Cable Box / Satellite receivers (Set-Top Box) connected to the TV.

22” : TV, AV1, AV2, Component , PC, ■ HDMI/DVI, USB

26”/32” : TV, AV1, AV2, Component1, ■ Component2, PC, HDMI1/DVI, HDMI2, HDMI3, USB

Basic Features

In the ✎Source List, connected inputs will be highlighted.

Edit Name

VCR / DVD / Cable STB / Satellite STB / PVR STB / ■ AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name

the device connected to the input jacks to make your input source selection easier.

When connecting an HDMI/DVI cable to the ✎HDMI IN

1(DVI ) or HDMI (DVI) IN port, you should set to DVI

PC or DVI Devices mode under Edit Name.

03 Basic Features

How to Navigate Menu

Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions.

3

1

2

1 ENTERE / Direction button: Move the cursor and

select an item. Conﬁrm the setting.

2 RETURN button: Returns to the previous menu. 3 MENU button: Displays the main on-screen menu. 4 EXIT button: Exits the on-screen menu.

How to Operate the OSD (On Screen Display)

The access step may differ depending on the selected menu.

1

2 3 4 5

6 7

MENU

▲ / ▼

ENTER

▲ / ▼

◄ / ►

ENTER

EXIT

The main menu options appears on the screen:

m

Picture, Sound, Channel, Setup, Input, Application, Support.

Select an icon with the ▲ or ▼ button.

Press ENTERE to access the

E

sub-menu. Select the desired submenu with

the ▲ or ▼ button. Adjust the value of an item with the

◄ or ► button. The adjustment in the OSD may differ depending on the selected menu.

Press ENTERE to complete the

E

conﬁguration. Press EXIT.

e

4

Channel Menu

Channel Manager

Delete or set favourites channels. Select a channel in the Channels, My Channels or Scheduled screen.

c

6 C --

c

Channels

All

Zoom Select Page T Tools

■ Channels: Shows the channel list according to channel type.

*

■

My Channels: Shows the group of the channel.

■ Scheduled: Shows all the currently reserved

Using the colour buttons with the ✎Channel Manager

Green (Zoom): Enlarges or shrinks a channel

x

number.

Yellow (Select): Select desired channels and press

x

the Yellow button to set all the selected channels at the same time. The c mark appears to the left of the selected channels.

(Page): Move to next or previous page.

x

T x (To ols): Displays the Channel Manager option

menu. (The Options menus may differ depending on the situation.)

Channel Status Display Icons

Icons Operations

A channel selected.

c

A channel set as a Favourite.

*

A locked channel.

\

A reserved programme.

)

7 * C --

8 * C --

9 C --

10 C -- 12 C -- 13 C --

programmes.

Edit My Channels Lock Timer Viewing Edit Channel Name Sort Delete

▼

Basic Features

B

Using Favourite Channels ¦

*

My Channels

(in Channel Manager) Shows all favourite channels.

Edit My Channels ■ channels to desired my channels group.

The “

✎ *

” symbol will be displayed and the channel will

be set as a my channel.

1. Select a channel and press the TOOLS button.

2. Add or delete a channel in the my channel groups

you want among 1, 2, 3 and 4.

One or more groups can be selected.

x

3. After you have changed the settings, the channel list for each group can be viewed in My Channels.

My Channels

Zoom Select Page T Tools

Retuning channels ¦

Area

You can change the desired area.

Auto Store

Scans for a channel automatically and stores in the TV.

Automatically allocated programme numbers may not

✎

correspond to actual or desired programme numbers. If a channel is locked using the Child Lock function, the PIN input window appears.

Manual Store

Scans for a channel manually and stores in the TV.

If a channel is locked using the ✎Child Lock function, the PIN input window appears.

Programme (0~99), Colour System, Sound System, ■ Channel, Search): If there is abnormal sound or no

sound, reselect the sound standard required.

t

My Channel 1

My Channel 2 My Channel 3 My Channel 4

: You can set the selected

Aerial or Cable channel mode

6 C -7 * C --

8 * C --

9 C - 10 C - 12 C - 13 C --

Programme mode

Channel mode

✎

P x (programme mode): When tuning is complete,

the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by entering the position number in this mode.

C x (aerial channel mode) / S (cable channel mode):

These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.

Editing channels ¦

Channel Manager Option Menu (in Channel Manager)

1. Select a channel and press the TOOLS button.

2. Edit the channel name using the Edit Channel Name

menu respectively.

Edit Channel Name ■ : Assign your own channel name.

Other Features ¦

Channel Manager Option Menu

(in Channel Manager) Set each channel using the Channel Manager menu options

(Lock / Unlock, Timer Viewing, Sort, Delete, Select All / Deselect All). Option menu items may differ depending on the channel status.

1. Select a channel and press the TOOLS button.

2. Select a function and change its settings.

Lock / Unlock ■ : Lock a channel so that the channel

cannot be selected and viewed.

NOTE

✎

This function is available only when the xChild Lock is set to On.

The PIN input screen appears. Enter your 4-digit PIN,

x

the default of which is “0-0-0-0”. Change the PIN using the Change PIN option.

Timer Viewing ■ : You can set a desired channel to be displayed automatically at the intended time. Set the current time ﬁrst to use this function.

Sort ■ : This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store.

Delete ■ : You can delete a channel to display the channels you want.

Select All / Deselect All ■ : Select all the channels or deselect all the selected channels in the channel manager.

English

12

13

English

03 Basic Features

Scheduled

POWER

MEDIA.P

E.SAVING

(in Channel Manager) You can view, modify or delete a a show you have reserved

to watch.

Change Info ■ : Change a show you have reserved to watch.

Cancel Schedules ■ : Cancel a show you have reserved to watch.

Information ■ : Display a show you have reserved to watch. (You can also change the reservation information.)

Select All / Deselect All ■ : Select or deselect all reserved programmes.

Adjusting picture settings ¦

Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R)

Your television has several setting options for picture quality control.

NOTE

✎

In analogue xTV, AV modes of the PAL system, the Tint (G/R) function is not available.

In PC mode, you can only make changes to

x

Backlight, Contrast and Brightness. Settings can be adjusted and stored for each

x

external device connected to the TV.

Channel List

You can see all the channels searched.

Fine Tune

If the signal is weak or distorted, ﬁne tune the channel manually.

Fine tuned channels are marked with an asterisk “*”.

Picture Menu

Changing the Preset Picture Mode ¦

Mode

Select your preferred picture type.

Dynamic ■ : Suitable for a bright room.

Standard ■ : Suitable for a normal

environment.

Movie ■ : Suitable for watching movies in a dark room.

Economical Solutions ¦

ECO Solution

Energy Saving (Off / Low / Medium / ■ High / Picture Off / Auto)

Adjust the brightness of the TV in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button except volume button to turn on the screen. Until the screen turns on again, a distorted picture will be displayed for about 4 seconds.

No Signal Power Off (Off / 15 min / 30 min / 60 min) ■ : Activates the Stand-by mode, in the case of “No Signal” or “Check Signal Cable” status for a certain period of time deﬁned by the user.

Disabled when the PC is in power saving mode.

✎

t

: