Samsung KM44C4103CSL-6, KM44C4103CSL-5, KM44C4103CS-6, KM44C4103CS-5, KM44C4103CK-6 Datasheet

CMOS DRAMKM44C4003C, KM44C4103C

This is a family of 4,194,304 x 4 bit Quad CAS with Fast Page Mode CMOS DRAMs. Fast Page Mode offers high speed random access
of memory cells within the same row. Refresh cycle (2K Ref. or 4K Ref.), access time (-5 or -6), power consumption(Normal or Low
power) and package type(SOJ or TSOP-II) are optional features of this family. All of this family have CAS-before-RAS refresh, RAS-only
refresh and Hidden refresh capabilities. Furthermore, Self-refresh operation is available in L-version. Four separate CAS pins provide for
seperate I/O operation allowing this device to operate in parity mode.
This 4Mx4 Fast Page Mode Quad CAS DRAM family is fabricated using Samsung′s advanced CMOS process to realize high band­width, low power consumption and high reliability.

• Part Identification

- KM44C4003C/C-L (5V, 4K Ref.)

- KM44C4103C/C-L (5V, 2K Ref.)

• Fast Page Mode operation

• Four seperate CAS pins provide for separate I/O operation

• CAS-before-RAS refresh capability

• RAS-only and Hidden refresh capability

• Self-refresh capability (L-ver only)

• Fast paralleltest mode capability

• TTL compatible inputs and outputs

• Early Write or output enable controlled write

• JEDEC Standard pinout

• Available in Plastic SOJ and TSOP(II) packages

• Single +5V±10% power supply

Control
Clocks

RAS

CAS0 - 3

W

Vcc
Vss

DQ0

to

DQ3

A0-A11

(A0 - A10)*1

A0 - A9

(A0 - A10)*1

Memory Array

4,194,304 x 4

Cells

SAMSUNG ELECTRONICS CO., LTD. reserves the right to
change products and specifications without notice.

4M x 4Bit CMOS Quad CAS DRAM with Fast Page Mode

DESCRIPTION

FEATURES

FUNCTIONAL BLOCK DIAGRAM

• Refresh Cycles
Part

NO.

Refresh

cycle

Refresh period

Normal L-ver

C4003C 4K 64ms

128ms

C4103C 2K 32ms

• Performance Range

Speed

tRAC tCAC tRC tPC

Remark

-5 50ns 13ns 90ns 35ns 5V/3.3V

-6 60ns 15ns 110ns 40ns 5V/3.3V

• Active Power Dissipation

Speed

Refresh Cycle

4K 2K

-5 495 605

-6 440 550

Unit : mW

Sense Amps & I/O

Data out

Buffer

Data in

Buffer

OE

Note) *1 : 2K Refresh

Col. Address Buffer

Row Address Buffer

Refresh Counter

Refresh Control

Refresh Timer

Column Decoder

Row Decoder

VBB Generator

CMOS DRAMKM44C4003C, KM44C4103C

PIN CONFIGURATION (Top Views)

Pin Name Pin Function

A0 - A11 Address Inputs (4K Product)
A0 - A10 Address Inputs (2K Product)

DQ0 - 3 Data In/Out

VSS Ground

RAS Row Address Strobe

CAS0~CAS3 Column Address Strobe

W Read/Write Input

OE Data Output Enable
VCC Power(+5.0V)
N.C No Connection

VCC
DQ0
DQ1

W

RAS

*A11(N.C)

CAS0
CAS1

A10

A0
A1
A2
A3

VCC

VSS
DQ3
DQ2
CAS3
OE
A9
CAS2
N.C
A8
A7
A6
A5
A4
VSS

1
2
3
4
5
6
7
8
9
10
11
12
13
14

28
27
26
25
24
23
22
21
20
19
18
17
16
15

VCC
DQ0
DQ1

W

RAS

*A11(N.C)

CAS0
CAS1

A10

A0
A1
A2
A3

VCC

VSS
DQ3
DQ2
CAS3
OE
A9
CAS2
N.C
A8
A7
A6
A5
A4
VSS

1
2
3
4
5
6
7
8
9
10
11
12
13
14

28
27
26
25
24
23
22
21
20
19
18
17
16
15

*A11 is N.C for KM44C4103C(5V, 2K Ref. product)
K : 300mil 28 SOJ

S : 300mil 28 TSOP II

• KM44C40(1)03CK

• KM44C40(1)03CS

CMOS DRAMKM44C4003C, KM44C4103C

ABSOLUTE MAXIMUM RATINGS

* Permanent device damage may occur if "ABSOLUTE MAXIMUM RATINGS" are exceeded. Functional operation should be restricted

to the conditions as detailed in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for
extended periods may affect device reliability.

Parameter Symbol Rating Units

Voltage on any pin relative to VSS VIN,VOUT -1.0 to +7.0 V
Voltage on VCC supply relative to VSS VCC Inputs -1.0 to +7.0 V
Storage Temperature Tstg -55 to +150 °C
Power Dissipation PD 1 W
Short Circuit Output Current IOS 50 mA

RECOMMENDED OPERATING CONDITIONS (Voltage referenced to Vss, TA= 0 to 70°C)

*1 : VCC+2.0V/20ns, Pulse width is measured at VCC
*2 : -2.0/20ns, Pulse width is measured at VSS

Parameter Symbol Min Typ Max Units

Supply Voltage VCC 4.5 5.0 5.5 V
Ground VSS 0 0 0 V
Input High Voltage VIH 2.4 -

VCC+1.0

*1

V

Input Low Voltage VIL

-1.0

*2

- 0.8 V

DC AND OPERATING CHARACTERISTICS (Recommended operating conditions unless otherwise noted.)

Parameter Symbol Min Max Units

Input Leakage Current (Any input 0≤VIN≤VIN+0.5V,
all other input pins not under test=0 Volt)

II(L) -5 5 uA

Output Leakage Current
(Data out is disabled, 0V≤VOUT≤VCC)

IO(L) -5 5 uA

Output High Voltage Level(IOH=-5mA) VOH 2.4 - V
Output Low Voltage Level(IOL=4.2mA) VOL - 0.4 V

CMOS DRAMKM44C4003C, KM44C4103C

*Note :

ICC1, ICC3, ICC4 and ICC6 are dependent on output loading and cycle rates. Specified values are obtained with the output open.
ICC is specified as an average current. In ICC1, ICC3 and ICC6 address can be changed maximum once while RAS=VIL. In ICC4,
address can be changed maximum once within one fast page mode cycle time, tPC.

DC AND OPERATING CHARACTERISTICS (Continued)

ICC1* : Operating Current (RAS and CAS, Address cycling @tRC=min.)
ICC2 : Standby Current (RAS=CAS=W=VIH)
ICC3* : RAS-only Refresh Current (CAS=VIH, RAS, Address cycling @tRC=min.)
ICC4* : Fast Page Mode Current (RAS=VIL, CAS, Address cycling @tPC=min.)
ICC5 : Standby Current (RAS=CAS=W=VCC-0.2V)
ICC6* : CAS-Before-RAS Refresh Current (RAS and CAS cycling @tRC=min.)
ICC7 : Battery back-up current, Average power supply current, Battery back-up mode
Input high voltage(VIH)=VCC-0.2V, Input low voltage(V IL)=0.2V, CAS=0.2V,
DQ=Don′t care, TRC=31.25us(4K/L-ver), 62.5us(2K/L-ver), TRAS=TRASmin~300ns
ICCS : Self Refresh Current
RAS=CAS=0.2V, W=OE=A0 ~ A11=VCC-0.2V or 0.2V,
DQ0 ~ DQ3=VCC-0.2V, 0.2V or Open

Symbol Power Speed

Max

Units

KM44C4003C KM44C4103C

ICC1 Don′t care

-5

-6

90
80

110
100

mA
mA
mA

ICC2

Normal

L

Don′t care

2
1

2
1

mA
mA

ICC3 Don′t care

-5

-6

90
80

110
100

mA
mA
mA

ICC4 Don′t care

-5

-6

80
70

90
80

mA
mA
mA

ICC5

Normal

L

Don′t care

1

250

1

250

mA

uA

ICC6 Don′t care

-5

-6

90
80

110
100

mA
mA

mA
ICC7 L Don′t care 300 300 uA
ICCS L Don′t care 250 250 uA

CMOS DRAMKM44C4003C, KM44C4103C

CAPACITANCE (TA=25°C, VCC=5V, f=1MHz)

Parameter Symbol Min Max Units

Input capacitance [A0 ~ A11] CIN1 - 5 pF
Input capacitance [RAS, CASx, W, OE] CIN2 - 7 pF
Output capacitance [DQ0 - DQ3] CDQ - 7 pF

Test condition : VCC=5.0V±10%, Vih/Vil=2.4/0.8V, Voh/Vol=2.4/0.4V

Parameter Symbol

-5 -6
Units Notes

Min Max Min Max

Random read or write cycle time

tRC

90 110 ns

Read-modify-write cycle time

tRWC

133 155 ns

Access time from RAS

tRAC

50 60 ns 3,4,10

Access time from CAS

tCAC

13 15 ns 3,4,5,18

Access time from column address

tAA

25 30 ns 3,10

CAS to output in Low-Z

tCLZ

0 0 ns 3,18

Output buffer turn-off delay

tOFF

0 13 0 15 ns 6

Transition time (rise and fall)

tT

3 50 3 50 ns 2

RAS precharge time

tRP

30 40 ns

RAS pulse width

tRAS

50 10K 60 10K ns

RAS hold time

tRSH

13 15 ns 14

CAS hold time

tCSH

50 60 ns 17

CAS pulse width

tCAS

13 10K 15 10K ns 23

RAS to CAS delay time

tRCD

20 37 20 45 ns 4,16

RAS to column address delay time

tRAD

15 25 15 30 ns 10

CAS to RAS precharge time

tCRP

5 5 ns 15

Row address set-up time

tASR

0 0 ns

Row address hold time

tRAH

10 10 ns

Column address set-up time

tASC

0 0 ns 16

Column address hold time

tCAH

10 10 ns 16

Column address to RAS lead time

tRAL

25 30 ns

Read command set-up time

tRCS

0 0 ns

Read command hold time referenced to

tRCH

0 0 ns 8,15

Read command hold time referenced to

tRRH

0 0 ns 8

Write command hold time

tWCH

10 10 ns 14

Write command pulse width

tWP

10 10 ns

Write command to RAS lead time

tRWL

13 15 ns

Write command to CAS lead time

tCWL

13 15 ns 17

AC CHARACTERISTICS (0°C≤TA≤70°C, See note 1,2)

CMOS DRAMKM44C4003C, KM44C4103C

AC CHARACTERISTICS (Continued)

Parameter Symbol

-5 -6
Units Notes

Min Max Min Max

Data set-up time

tDS

0 0 ns 9

Data hold time

tDH

10 10 ns 9

Refresh period (2K, Normal)

tREF

32 32 ms

Refresh period (4K, Normal)

tREF

64 64 ms

Refresh period (L-ver)

tREF

128 128 ms

Write command set-up time

tWCS

0 0 ns 7,16

CAS to W delay time

tCWD

36 40 ns 7,14

RAS to W delay time

tRWD

73 85 ns 7

Column address to W delay time

tAWD

48 55 ns 7

CAS precharge to W delay time

tCPWD

53 60 ns 7

CAS set-up time (CAS -before-RAS refresh)

tCSR

5 5 ns 16

CAS hold time (CAS -before-RAS refresh)

tCHR

10 10 ns 15

RAS to CAS precharge time

tRPC

5 5 ns 16

Access time from CAS precharge

tCPA

30 35 ns 3,15

Fast Page mode cycle time

tPC

35 40 ns 19

Fast Page read-modify-write cycle time

tPRWC

76 85 ns 19

CAS precharge time (Fast Page cycle)

tCP

10 10 ns 20

RAS pulse width (Fast Page cycle)

tRASP

50 200K 60 200K ns

RAS hold time from CAS precharge

tRHCP

30 35 ns

OE access time

tOEA

13 15 ns 21

OE to data delay

tOED

13 15 ns 22

Output buffer turn off delay time from OE

tOEZ

0 13 0 15 ns 6

OE command hold time

tOEH

13 15 ns

Write command set-up time (Test mode in)

tWTS

10 10 ns 11

Write command hold time (Test mode in)

tWTH

10 10 ns 11

W to RAS precharge time(C-B-R refresh)

tWRP

10 10 ns

W to RAS hold time(C-B-R refresh)

tWRH

10 10 ns

RAS pulse width (C-B-R self refresh)

tRASS

100 100 us 25,26,27

RAS precharge time (C-B-R self refresh)

tRPS

90 110 ns 25,26,27

CAS hold time (C-B-R self refresh)

tCHS

-50 -50 ns 25,26,27

Hold time CAS low to CAS high

tCLCH

5 5 ns 13,24