Samsung KE55S9CSL User Manual [en, de, fr, it]

Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

Customer Care Centre

Web Site

AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) www.samsung.com

BELGIUM 02-201-24-18 www.samsung.com/be

(Dutch)
www.samsung.com/be_fr

(French)

BOSNIA 051 331 999 www.samsung.com

BULGARIA 07001 33 11 , share cost tariff www.samsung.com/bg

CROATIA 062 SAMSUNG (062 726 786) www.samsung.com/hr

CZECH 800 - SAMSUNG (800-726786) www.samsung.com

Samsung Electronics Czech and Slovak, s.r.o. V Parku 2343/24, 148 00 - Praha 4

DENMARK 70 70 19 70 www.samsung.com

FINLAND 030-6227 515 www.samsung.com

FRANCE 01 48 63 00 00 www.samsung.com/fr

GERMANY

0180 6 SAMSUNG bzw.

www.samsung.com
0180 6 7267864*
(*0,20 €/Anruf aus dem dt. Festnetz, aus dem

Mobilfunk max. 0,60 €/Anruf)

CYPRUS 8009 4000 only from landline www.samsung.com/gr

GREECE 80111-SAMSUNG (80111 726 7864) only

www.samsung.com/gr
from land line

([phone] from mobile and land
line

HUNGARY 06-80-SAMSUNG (726-7864)

http://www.samsung.com/hu

Country

POLAND

Customer Care Centre

0 801-172-678* lub [phone] **

*(całkowity koszt połączenia jak za 1 impuls
według taryfy operatora)

** (koszt połączenia według taryfy operatora)

PORTUGAL 808 20-SAMSUNG (808 20 7267) www.samsung.com

ROMANIA 08008 SAMSUNG (08008 726 7864)

TOLL FREE No.

SERBIA 011 321 6899 www.samsung.com/rs

SLOVAKIA 0800 - SAMSUNG (0800-726 786) www.samsung.com

SPAIN 902172678 www.samsung.com

SWEDEN 0771 726 7864 (SAMSUNG) www.samsung.com

SWITZERLAND 0848 - SAMSUNG(7267864, CHF 0.08/

min)

U.K 0330 SAMSUNG (7267864) www.samsung.com

EIRE 0818 717100 www.samsung.com

LITHUANIA 8-800-77777 www.samsung.com/lt

LATVIA 8000-7267 www.samsung.com/lv

ESTONIA 800-7267 www.samsung.com/ee

TURKEY 444 77 11 www.samsung.com

ITALIA 800-SAMSUNG (726-7864) www.samsung.com

LUXEMBURG 261 03 710 www.samsung.com

MONTENEGRO 020 405 888 www.samsung.com

NETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/

www.samsung.com
Min)

NORWAY 815 56480 www.samsung.com

© 2013 Samsung Electronics Co., Ltd. All rights reserved.

Web Site

www.samsung.com/pl

www.samsung.com/ro

www.samsung.com/ch
(German)

www.samsung.com/ch_fr
(French)

Thank you for purchasing this Samsung product.
To receive more complete service, please register

your product at

www.samsung.com/register

If you have any questions or comments relating to
Samsung products, please contact the SAMSUNG
customer care centre.

BN68-05491D-01

[S9C-ZG]BN68-05491D-01L04.indb 1 2013-10-31  11:16:13

Important Safety Instructions

Warning! Important Safety Instructions

(Please read the appropriate section that corresponds to the marking on your Samsung product

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
THERE ARE NO USER SERVICEABLE PARTS
INSIDE. REFER ALL SERVICING TO QUALIFIED
PERSONNEL.

• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To
ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings
must never be blocked or covered.

− Do not cover this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper

ventilation is provided.

− Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight.

− Do not place a water containing vessel(vases etc.) on this apparatus, as this can result in a risk of fire or

electric shock.

• Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool etc.). If this apparatus accidentally gets wet,
unplug it and contact an authorized dealer immediately. Make sure to pull out the power cord from the outlet
before cleaning.

• This apparatus use batteries. In your community there might be regulations that require you to dispose
of these batteries properly under environmental considerations. Please contact your local authorities for
disposal or recycling information.

• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire
or electric shock.

• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plug end, adaptors and the point where they
exit from the appliance.

• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to
the set due to lightning and power line surges.

• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the
DC adaptor corresponds to the local electrical supply.

before attempting to install the product.)

This symbol indicates that high
voltage is present inside. It is
dangerous to make any kind of
contact with any internal part of this
product.

This symbol alerts you that important
literature concerning operation and
maintenance has been included with
this product.

• Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of

• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this

• Make sure to plug the power cord in until it is firmly inserted. When removing the power cord, make sure to

• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming

• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house

• Be sure to contact an authorized service centre, when installing your set in a location with heavy dust, high

• Failure to do so may cause serious damage to your set.

• Use only a properly grounded plug and receptacle.

• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore

• Do not allow children to hang onto the product.

• Store the accessories (battery, etc.) in a location safely out of the reach of children.

• Do not install the product in an unstable location such as a shaky self, a slanted floor or a location exposed

• Do not drop or impart any shock to the product. If the product is damaged, disconnect the power cord and

• Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any

• Apparatus shall not be exposed to dripping or splashing.

• Do not dispose of batteries in a fire.

• Do not short circuit, disassemble or overheat the batteries.

• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY

electric shock.

apparatus.

hold the power plug when pulling the plug from the outlet. Do not touch the power cord with wet hands.

from it - unplug it immediately and contact an authorized dealer or service centre.

for an extended period of time (especially when children, elderly or disabled people will be left alone in the
house).

− Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to

generate sparks and heat or the insulation to deteriorate.

or low temperatures, high humidity, chemical substances and where it operates for 24 hours such as the
aerial port, the train station etc.

− An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

the mains plug shall be readily operable.

to vibration.

contact a service centre.

chemicals such as wax, benzene, alcohol, thinners, insecticide, aerial freshener, lubricant or detergent. This
may damage the appearance or erase the printing on the product.

FROM THIS PRODUCT AT ALL TIMES.

English - 2

[S9C-ZG]BN68-05491D-01L04.indb 2 2013-10-31  11:16:14

Figures and illustrations in this User Manual are provided for reference only and may differ from the actual product appearance. Product design and specifications may change
without notice.

CIS languages (Russian, Ukrainian, Kazakhs) are not available for this product, since this is manufactured for customers in EU region.

Features for your new TV

English

• 3D: This new feature enables you to view 3D content.

• SMART HUB:

This TV features Smart Hub, a multi-purpose entertainment and family centre. With
Smart Hub, users can surf the web, download applications, and stay in touch with
family and friends through social networking services. In addition, you can enjoy
photo, video, and music files stored on external storage devices.

Press the

™

button to launch Smart Hub. Choose a service using the icons

displayed in the top part of the screen.
Social: Watch the latest YouTube videos and you and your friends' video posts on

Facebook and Twitter. You can also make video calls to friends by the TV camera.

Apps: Download and install applications such as Web Browser.
On TV: Check a listing of programmes that are currently aerialing and are

scheduled to aerial. (Depending on the country)
Films and TV Shows: Purchase and watch movies and series without a separate

external device. (Depending on the country)
Photos, Videos & Music: Play back photo, video, and music files from an external

storage device.

• Anynet+ (HDMI-CEC): This allows you to control all connected Samsung devices

that support Anynet+ with your Samsung TV’s remote.

• e-Manual: Provides a detailed, on-screen user's manual built into your TV. (page

15)

• SMART Interaction: Using this function, you can access and control menu options

and functions using motions.

Voice Interaction in the German language is available in Switzerland.

✎

• Device Manager: Use the TV features with a USB or Bluetooth keyboard and

mouse.

• MHL & Screen Mirroring: Displays mobile device screens on your TV using a

wired or wireless connection.

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its
electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with
other household waste at the end of their working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please separate these items
from other types of waste and recycle them responsibly to promote the sustainable reuse of
material resources.

Household users should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take these items for
environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product and its electronic accessories should not be mixed with
other commercial wastes for disposal.

Correct disposal of batteries in this product
(Applicable in countries with separate collection systems)

This marking on the battery, manual or packaging indicates that the batteries in this
product should not be disposed of with other household waste at the end of their working
life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries
are not properly disposed of, these substances can cause harm to human health or the
environment.

To protect natural resources and to promote material reuse, please separate batteries from
other types of waste and recycle them through your local, free battery return system.

English - 3

[S9C-ZG]BN68-05491D-01L04.indb 3 2013-10-31  11:16:14

Accessories

• Please make sure the following items are included with your TV. If any items are
missing, contact your dealer.

• The items’ colours and shapes may vary depending on the models.

• Cables not included in the package contents can be purchased separately.

• Check that there is no accessory hidden behind packing materials when you open
the box.

• Smart Touch Control & Batteries (AAA x 2) • Power Cord

• Remote Control & Batteries (AAA x 2) • Samsung 3D Active Glasses

• User Manual • Regulatory Guide

• Warranty Card

(Not available in some locations)

Scart Adapter AV Adapter Component Adapter

IR Extender Cable Wireless Keyboard (Sold Separately) One Connect cable

One Connect Ferrite Core (1 EA) CI Card Adapter

• Cleaning-Cloth

Using the Ferrite Core : Use the provided ferrite core to protect

✎

the One Connect cable, which connects the TV to the One
Connect, from electromagnetic interference. As shown in the
illustration, unfold the ferrite core, make a loop of the One
Connect cable around the ferrite core, and then connect the TV
to the One Connect using the cable.

• An administration fee may be charged if either

− (a) an engineer is called out at your request and there is no defect in the

product (i.e. where you have failed to read this user manual)

− (b) you bring the unit to a repair centre and there is no defect in the product (i.e.

where you have failed to read this user manual).

• The amount of such administration charge will be advised to you before any work
or home visit is carried out.

Still image warning

Avoid displaying still images (such as jpeg picture files), still image elements (such as
TV channel logos, stock or news bars at the screen bottom etc.), or programmes in
panorama or 4:3 image format on the screen. Constantly displaying still pictures can
cause image burn-in on the OLED screen, which will affect image quality. To reduce risk
of this effect, please follow the recommendations below:

• Avoid displaying the same TV channel for long periods.

• Always try to display any image in full screen. Use the TV set’s picture format menu
for the best possible match.

• Reduce brightness and contrast to avoid the appearance of after-images.

• Use all TV features designed to reduce image retention and screen burn. Refer to
the e-Manual for details.

English - 4

[S9C-ZG]BN68-05491D-01L04.indb 4 2013-10-31  11:16:15

Basic Features

Using the Smart Touch Control

Displays and selects the available video sources.

Turns the TV on and off.

Cuts off the sound temporarily.

Press and hold this button to

select Audio Description and

Subtitle. (Depending on the

country or region.)

Adjusts the volume.

TouchPad

• Drag on the touchpad to move the focus on
the screen.

• Press the touchpad to run, activate, or
select the highlighted item.

• Press and hold the touchpad to display the

Channel List.

RECOMM.: This shows the current/scheduled

programme and application recommendations.

SEARCH: Enter search criteria to search not

only many apps and their contents on the TV

but also the Web.

Returns to the previous menu. Press and

hold this button to exit all currently running

applications.

˜

You can use the MIC to give Voice Recognition commands. Simply press the VOICE

Voice Recognition function can be affected by unclear pronunciation, voice level, or surrounding

✎

noise.

Turn on and off the satellite or cable set-top box connected to the TV. For this, the
Smart Touch Control must be configured as a universal remote control.

VOICE

˜

Take your voice command and enter a text using your voice.

Changes channels.

Displays a virtual remote panel on the screen. See the e-Manual chapter,
Controlling TV > Using the Virtual Remote Control.

Press and hold the MORE button to select a desired function (e.g. MENU (

TOOLS (T), INFO (`), etc.) easily.

While watching TV, tap on the protruding line on the left or right edge of the
touchpad to bring up the numerical input window on the screen.

The colour buttons work differently, depending on the function that the TV is
currently performing.

MULTI VIEW (
MULTI VIEW (

select a screen to control among the Screen 1 and Screen 2.

`

: Displays information on the TV screen.

: Turns the 3D function on or off.See e-Manual chapter, TV Viewing > 3D TV.

View each digital channel's programming schedule, including showtimes. In
addition, sets a Schedule Viewing or Schedule Recording to press the touchpad
on the programme entry scheduled to air later.

Brings up Smart Hub applications. See the e-Manual chapter, Smart TV Features
> Smart Hub.

To exit an application that is running, press the ™ button.

✎

): Turns the Samsung Multi View on and off.

): When using the Samsung Multi View function, users can

button.

m

English

),

English - 5

[S9C-ZG]BN68-05491D-01L04.indb 5 2013-10-31  11:16:16

Connecting to the TV

Battery Low Alarm

In order to operate the TV using a Smart Touch Control, you must fi rst pair it to the
TV via Bluetooth. However, the Smart Touch Control is only available for the paired
Samsung TV.

We recommend to use the Smart Touch Control in less than 6m. A usable

✎

distance may differ depending on the wireless environmental conditions.

1. When the TV is off, point the Smart Touch Control at the remote control receiver of

the TV and press the TV button for the fi rst pairing. Only this buttons sends an IR
signal. The remote control receiver's location may vary depending on the model.

2. A Bluetooth icon will appear at the bottom left of the screen as shown below. The

TV will then attempt to connect to the Smart Touch Control automatically.

<Attempting to connect and completion icons>

Reconnecting the Smart Touch Control

<The Smart Touch Control's pairing button>
If the Smart Touch Control stops operating or works

abnormally, replace the battery as this may be caused
by insuffi cient battery power. If the problem persists,
press the PAIRING button on the Smart Touch Control to
restore pairing with the TV. The PAIRING button cannot
be accessed without removing the Smart Touch Control's
battery cover. Within a distance between 30cm to 4m, point
the Smart Touch Control to the TV receiver and press the

PAIRING button. When pairing is complete, the pairing

image displays at the bottom left of the TV screen.

If the battery becomes and blanks low while using the Smart Touch
Control, the following alarm window blinks and appears at the
bottom left of the screen. If the alarm window pops up, replace the
batteries of the Smart Touch Control. Use alkaline batteries for longer
usage.

Inserting the Batteries (AAA X 2)

1

2

1. Slightly lift the battery cover by using a plastic card. Next, pull on the cover’s notch

with a fi ngernail to remove the cover completely.

Check the location of the battery cover groove. The groove's location may

✎

vary depending on the type of Smart Touch Control is provided with the
product.

2. Insert 2 AAA batteries, making sure to align the positive and negative ends

correctly.

3. Align the battery cover with the back of the remote control and press down along

the edges until it is cleanly attached to the remote control.

3

English - 6

[S9C-ZG]BN68-05491D-01L04.indb 6 2013-10-31  11:16:16

Using the Touchpad

English

Use the touchpad to perform various commands. Navigate to Tutorial (Screen Menu
> System > Device Manager > Smart Touch Control Settings > Tutorial) to view an
on-screen guide to using the Smart Touch Control.

Dragging Press

Drag on the touchpad in the desired direction.

Move the focus or the pointer in the direction the finger

is dragging.

Press on the touchpad. This selects the focused item.

When watching TV, pressing and holding the touchpad

displays the channel list. On some apps, pressing and

holding the touchpad for over 2 seconds displays a list of

functions available for the app.

Changing Channels by Entering Numbers

While watching TV, tap on the protruding line on the left
or right edge of the touchpad to bring up the numerical
input window on the screen. Use your finger to enter
the number for the channel you want to watch. The
recognised number is displayed on the screen and the TV
switches to the corresponding channel. See the e-Manual
chapter, Controlling TV > Touchpad.

Numerical Input Guide

Refer to the diagrams below when entering numerical values. The TV may not
recognise your entries if you do not follow the sequences shown below.

Show Status and Notification Banner

Press the MORE button on the Smart Touch Control and then select STATUS on
the virtual remote panel to display the status and notification banner at the top of the
screen.

Recommendations

Press the RECOMM. / SEARCH button and then select Recommended from the list
displayed at the bottom of the screen. Select a programme that is currently airing to
jump to the corresponding channel or a programme that is scheduled to air to set up
a Schedule Viewing or Schedule Recording setting. Select an application to launch.
Samsung Apps will launch if the selected application is not installed on the TV.

English - 7

[S9C-ZG]BN68-05491D-01L04.indb 7 2013-10-31  11:16:17

History

Changing the Virtual Remote Panel

Press the RECOMM. / SEARCH button and then select History from the list displayed
at the bottom of the screen. This displays an interactive list of recently accessed
channels, media content and applications.

The RECOMM. / SEARCH button may function as a History recall feature,

✎

depending on your country or region.

Deleting History Data

You can delete the history information about recently viewed channels, content and
applications.

Searching

Press the RECOMM. / SEARCH button on the Smart Touch Control. The list appears
at the bottom of the screen. Press the RECOMM. / SEARCH button again. The
keypad will appear on the screen. Enter search criteria to search not only many
apps and their contents on the TV but also the Web. This button toggles between

Recommended and Search.

Adjusting the Touchpad

Users can adjust the sensitivity of the Smart Touch Control’s touchpad. Set Touch
Sensitivity to adjust sensitivity and make it more convenient to use.

Using the Virtual Remote Control

Press MORE button to display the virtual remote panel on the screen. The virtual
remote panel consists of a number panel, a playback control panel, and a quick access
panel. Use the touchpad to select numbers and buttons.

The displayed virtual remote panel on the TV screen may differ depending on the

✎

country.

Choose the number panel, playback control panel, or quick access panel as the panel
to be shown on the screen.

Use the touchpad to keep moving the focus left or right. The panel changes when the
focus is moved beyond the leftmost or rightmost edge.

Use left / right scroll function on the touchpad to change the panel easily.

✎

Using the Number Panel

Use the number panel to enter numbers on a keypad screen or webpage or to change
the channel while watching TV. Changing the channel using the number pad leaves a
record, allowing you to easily return to previous channels.

Using the Playback Control Panel

Use the playback control panel to pause, rewind, fast forward, skip to the next file, and
much more while enjoying media content.

Using the Quick Access Panel

Quickly access the INFO, MENU and e-Manual buttons. However, the availability of
buttons vary depending on the operating mode of the Smart Touch Control unit (with
the TV only, as a universal remote, etc.).

English - 8

[S9C-ZG]BN68-05491D-01L04.indb 8 2013-10-31  11:16:17

Using the Remote Control

Learn where the function buttons are on your remote. Especially note these: SOURCE, MUTE, Y, < P >, MENU, TOOLS, E, INFO, CH LIST, RETURN, GUIDE and EXIT.

Your TV also comes with a Smart Touch Control. For information about the Smart Touch Control, refer to the e-Manual.

✎

English

Turns the TV on and off.

Gives direct access to channels.

Alternately select Teletext ON Double, Mix or OFF.

Adjusts the volume.

Displays channel lists on the screen.

Opens the OSD (Menu).

Quickly selects frequently used functions.

Moves the cursor, selects the on-screen menu items, and

changes the values seen on the TV's menu.

Returns to the previous menu.

Use these buttons according to the directions on the TV's

screen.

Use these buttons in a specific feature. Use these buttons

according to the directions on the TV's screen.

Displays and selects the available video sources.

Returns to the previous channel.

Cuts off the sound temporarily.

Changes channels.

Brings up Smart Hub applications. See the e-Manual chapter, Smart TV Features >
Smart Hub.

Displays the EPG (Electronic Programme Guide).

Displays information on the TV screen.

Exits the menu.

AD/SUBT.STATUSSEARCH

RECOMMENDE-MANUAL

SEARCH: Support to recommendation search word and search function.
STATUS: Display the status and notification banner at the top of the screen.
AD/SUBT.: Turns the audio description on and off (not available in some locations)./

Displays digital subtitles. See e-Manual chapter TV Viewing > Subtitles.

E-MANUAL: Displays the e-Manual.
RECOMMEND: Displays and selects Recommended from the list displayed at the

bottom of the screen.

X

: Turns the 3D function on or off. See e-Manual chapter TV Viewing > 3D TV.

English - 9

[S9C-ZG]BN68-05491D-01L04.indb 9 2013-10-31  11:16:17

Installing batteries (Battery size: AAA)







Match the polarity of the batteries to the symbols in the battery compartment.

Turning on the TV

Turn on the TV using the P button on the remote control or TV panel.

The product colour and shape may vary depending on the model.

✎

The first time you turn on your TV, it will immediately start the initial setup.

✎

NOTE

✎

− Use the remote control within 23 feet of the TV.

− Bright light may affect the performance of the remote control. Avoid using when

near special fluorescent lights or neon signs.

− The colour and shape may vary depending on the model.

Function menu

P

button).

TV Controller

The control stick is located at the

lower-left corner on the back of

SpeakersSpeakers

Remote control sensor

When you use the Smart Touch Control, a standby LED
does not work (except

mR

P

the TV.

English - 10

[S9C-ZG]BN68-05491D-01L04.indb 10 2013-10-31  11:16:17

Built-in TV Camera

주의

Retracting the Camera

English

This TV features a built-in TV camera and microphone that you can use for the Motion
Control, Voice Recognition, and Face Recognition features. You can also use the

camera's angle adjustment knob to change the camera's viewing angle.

Lens

Knob for camera's angle adjustment

Extending the TV Camera

To use the TV camera, you must first extend it. Push the angle adjustment bar
to the right as shown in the diagram and remove the TV camera.

If you are not using the TV camera, keep it retracted inside the TV. The Motion Control
and Face Recognition features cannot be used while the TV camera is in the retracted
state, but Voice Recognition will still be available.

Push the angle adjustment bar to the left as shown in the diagram and insert the TV
camera.

Do not touch the lens while operating the TV
camera. You can leave fingerprints that may
affect the image quality. If the lens gets dirty,
clean it using a soft piece of cloth.

English - 11

[S9C-ZG]BN68-05491D-01L04.indb 11 2013-10-31  11:16:18

5 cm

Connecting the TV to One Connect

Universal Remote Setup

One Connect must be connected to the TV via the One Connect cable before
connecting an external device. The One Connect cable has two different ends, Connect
the TV to One Connect referring to the diagram.

One Connect

<TV-end Connector> <One Connect-end Connector>

TV

<One Connect-end Connector> <TV-end Connector>

[ The connectors at both ends of the One Connect cable are different

from each other in shape. When connecting the One Connect cable
to the TV, make sure that the right connector is plugged into the TV.
Otherwise, it may cause product failure.

This TV has a universal remote control feature that lets you control cable boxes, Blu­ray players, home theatres, and other third-party external devices connected to the TV
using the TV's remote control.

Plug the cable into the TV IR connector and then point the transmitter at the other
end of the cable towards the external device's remote panel receiver. However, there
can't be any obstacles between the IR extension cable and the external device. The
presence of an obstacle will interfere with the transmission of the remote control signal.

5 cm

Add the External Device

1. Turn on the external device you wish to set up universal remote function for and
then press SOURCE to bring up the Source screen.

2. Select Universal remote setup from the top of the screen. This initiates the

universal remote setup process.

3. Follow the on-screen instruction and set up the universal remote control. If it does
not work, set up the remote control by entering the model number manually.

English - 12

[S9C-ZG]BN68-05491D-01L04.indb 12 2013-10-31  11:16:18

SETUP

Switching Between Video Sources

English

The initial setup dialog appears when the TV is first activated. Follow the on-screen
instructions to finish the initial setup process, including menu language choice, channel
scan, network connection, and more. At each step, either make a choice or skip the
step. Users can manually perform this process at a later time under the Screen Menu >
System > Setup menu.

If you connect any device to HDMI1 before starting the installation, the Channel

✎

Source will be changed to Set-top box automatically.
If you do not want to select Set-top box, please select Aerial.

✎

Password Change

Screen Menu > System > Change PIN
Change the TV's password.

1. Run Change PIN and then enter the current password in the password field. The

default password is “0-0-0-0”.

2. Enter a new password and then enter it again to confirm it. The password change

is complete.
If you forget the PIN code, press the buttons in the following sequence which

✎

resets the PIN to “0-0-0-0”:

For Standard Remote Control: In Standby mode: MUTE → 8 → 2 → 4 →

POWER (On)

For Smart Touch Control: When the TV turns on: MUTE → Volume up →

RETURN → Volume down → RETURN → Volume up → RETURN

Press SOURCE button to switch between devices connected to the TV.
For example, to switch to a game console connected to the second HDMI connector, press

SOURCE button. From the Source list, select HDMI2. The connector names may vary depending

on the product. Select Tools button at the upper-right corner of the screen to access the following
functions.

• Anynet+ (HDMI-CEC)

A list appears showing Anynet+ compatible ones of external devices connected to the TV.

This function is only available Anynet+ (HDMI-CEC) function set to On.

✎

• Edit Name

You can rename devices connected to the TV to more easily identify external sources.
With a computer connected to the TV's HDMI (DVI) port via an HDMI cable, for example, you

can change Edit Name to PC.
With a computer connected to the TV's HDMI (DVI) port via an HDMI-to-DVI cable, for

example, you can change Edit Name to DVI PC.
With an AV device connected to the TV's HDMI (DVI) port via an HDMI-to-DVI cable, for

example, you can change Edit Name to DVI Devices.

• Information

View detailed information about the connected devices.

• Disconnect USB Device

Remove the USB device from the list safely. This function is only available when the USB
device selected.

• Universal remote setup

To add a new externa

SOURCE button and select Universal remote setup on the top right of the screen.

Using the universal remote control, users can control external devices connected to the
TV, such as a settop box, Blu-ray player, and AV receiv

English - 13

[S9C-ZG]BN68-05491D-01L04.indb 13 2013-10-31  11:16:19

l device to control it with the Smart Touch Control, press the

er.

Connecting to a COMMON INTERFACE slot (Your TV viewing Card Slot)

Turn the TV off to connect or disconnect a CI card or CI card adapter.

✎

Attaching the CI Card Adapter

TV Rear

Attach the adapter as shown side.

To install the CI CARD Adapter, please remove the sticker attached to the TV.

✎

To connect the CI CARD Adapter, follow these steps.

We recommend attaching the adapter before installing the wall mount, or inserting

✎

the “CI or CI+ CARD”.

1. Insert the CI CARD Adapter into the two holes on the product 1.
Please find two holes on the rear of the TV, beside the COMMON

✎

INTERFACE port.

2. Connect the CI CARD Adapter into the COMMON INTERFACE port on the

product 2.

3. Insert the “CI or CI+ CARD”.

Using the “CI or CI+ CARD”

To watch paid channels, the “CI or CI+ CARD” must be inserted.

• If you don’t insert the “CI or CI+ CARD”, some channels will display the message
“Scrambled Signal”.

• The pairing information containing a telephone number, the “CI or CI+ CARD” ID
the Host ID and other information will be displayed in about 2~3 minutes. If an error
message is displayed, please contact your service provider.

• When the configuration of channel information has finished, the message “Updating
Completed” is displayed, indicating the channel list is updated.

NOTE

✎

• You must obtain a “CI or CI+ CARD” from a local cable service provider.

• When removing the “CI or CI+ CARD”, carefully pull it out with your hands since
dropping the “CI or CI+ CARD” may cause damage to it.

• Insert the “CI or CI+ CARD” in the direction marked on the card.

• The location of the COMMON INTERFACE slot may be different depending on
the model.

• “CI or CI+ CARD” is not supported in some countries and regions; check with
your authorized dealer.

• If you have any problems, please contact a service provider.

• Insert the “CI or CI+ CARD” that supports the current aerial settings. The
screen will be distorted or will not be seen.

English - 14

[S9C-ZG]BN68-05491D-01L04.indb 14 2013-10-31  11:16:19

Viewing the e-Manual

Viewing the e-Manual

The embedded e-Manual contains information about your TV's key features.
This TV has a built-in user guide. To read it, use one of the following methods:

• Open the Support menu and choose e-Manual (Troubleshooting).

• Press the E-MANUAL button on the standard remote control.

• Press the MORE button on the Smart Touch Control to display control buttons on
the screen. Flick the touchpad until e-Manual appears and select it.

Words in blue refer to screen menu options and words in light blue refer to remote

✎

control buttons.
A printable version of this guide is also available at www.samsung.com/support.

✎

Scrolling a Page

To scroll a page, use of one of the following methods:

• Press the

• Drag or flick up or down the line on either the left or right edge of the touchpad.

• Place the focus on the
flick up or down on the touchpad.

Using the Top Icons

Use the Back, Forward, and Opened page icons on the top left of the screen to
navigate through pages. These icons are available when two or more pages are
passed.

Returning to the Home Page

To return to the home page, press the a button or select on the top right of the
screen.

or button on the scroll bar at the right edge of the screen.

or button at the right edge of the screen, drag or

Searching the Index

Press the b button or select on the top right of the screen to display the index.
Select a term to display the page containing the term.

Searching Pages

Press the { button or select on the top of the screen to access the search screen.
Enter a search phrase and select Done. Select an item from the search results list to
navigate to the relevant page.

Closing the e-Manual

To close the e-Manual, press and hold the RETURN button or select at the upper­right corner of the screen or press EXIT button.

Jumping to a Menu Item

To directly jump to the menu item that is described in the current section, select

Try Now

. It is possible to jump from a menu item directly to the related section in the

e-Manual. If you want to read an e-Manual entry on a specific screen menu feature,
press the virtual remote panel's or the regular remote's E-MANUAL button to load the
corresponding e-Manual page.

This feature may not be available, depending on the menu.

✎

Updating the e-Manual

Open the Smart Hub and select Apps, and then select More Apps. The e-Manual can
be updated in the same way with an application update.

On the More Apps screen, select Apps to update, and then select e-Manual from
the list. The e-Manual starts updating to the latest version. However, Apps to update
appears on the screen only when the update is required.

English

English - 15

[S9C-ZG]BN68-05491D-01L04.indb 15 2013-10-31  11:16:20

Network Configuration

Connecting to a Network

Connecting the Smart TV to a network gives you access to online services such as the
Smart Hub, as well as software updates.

Network Connection - Wireless

Connect the TV to the Internet using a standard router or modem.

The LAN Port

Wireless IP Router or Modem

that has a DHCP Server

LAN Cable (Not Supplied)

on the Wall

Wireless Network Precautions

• This Smart TV supports the IEEE 802.11a/b/g /n communication protocols.
Samsung recommends using IEEE 802.11n. Otherwise when you play video over a
network connection, the video may not play smoothly.

• To use a wireless network, the TV must be connected to a wireless router or

• Select a channel that is not currently in use for the wireless router. If the channel set

• Most wireless networks have an optional security system. To enable a wireless

Network Security Protocols

The TV only supports the following wireless network security protocols and is unable to
connect to non-certified wireless routers:

• Authentication Modes: WEP, WPAPSK, WPA2PSK

• Encryption Types: WEP, TKIP, AES

If the wireless router has been set to Pure High-throughput (Greenfield) 802.11n mode
and the Encryption Type to WEP or TKIP, Samsung Smart TVs will not support the
connection in compliance with the new Wi-Fi certification specifications.

If the wireless router supports WPS (Wi-Fi Protected Setup), it is possible to connect
to the network using PBC (Push Button Configuration) or a PIN (Personal Identification
Number). WPS automatically configures the SSID and WPA key settings.

modem. If the wireless router supports DHCP, the TV can use a DHCP or static IP
address to connect to the wireless network.

for the wireless router is currently being used by another device, the result is usually
interference and/or a communications failure.

network's security system, you need to create a security key using characters and
numbers. This security key is then needed to connect to the wireless network.

English - 16

[S9C-ZG]BN68-05491D-01L04.indb 16 2013-10-31  11:16:20

Network Connection - Wired

There are three main ways to connect your TV to your network using cable, depending
on your network setup. They are illustrated starting below:

One Connect

External Modem

(ADSL / VDSL / Cable TV)

The Modem

Port on the Wall

Samsung Multi View

Samsung Multi View is a convenient feature that allows two users that are both
wearing Samsung Multi View 3D Glasses to individually view different screens on the
same TV simultaneously. For example, two viewers can use the Samsung Multi View
feature to each watch a channel of his or her choosing at the same time. In addition,
two users can enjoy the same game simultaneously on a single screen.

Important: To use Samsung Multi View, you must be wearing a pair of Samsung Multi
View 3D Glasses.

English

One Connect

IP Router that has a

DHCP Server

LAN Cable

The TV does not support network speeds less than or equal to 10Mbps.

✎

Use Cat 7 cable for the connection.

✎

(Not Supplied)

One Connect

(Not Supplied)

LAN Cable (Not Supplied)

Modem Cable (Not Supplied) LAN Cable (Not Supplied)

External Modem

(ADSL / VDSL / Cable TV)

LAN Cable

The Modem
Port on the

Modem Cable
(Not Supplied)

The Modem

Port on the Wall

Wall

Using Samsung Multi View

To use Samsung Multi View, press and hold the b button or select Samsung Multi
View on the virtual remote panel. From the window that pops up, select either Multi
Screen View or 2 Player Gaming.

English - 17

[S9C-ZG]BN68-05491D-01L04.indb 17 2013-10-31  11:16:21

3D Basics

− With the Do not show again checkbox selected, Samsung Multi View starts

immediately with the already used view. To start Samsung Multi View with the
already used view, press and hold the button or select Samsung Multi View
on the virtual remote panel.

− To use another view type, choose Samsung Multi View from the menu (Screen
Menu > Picture > Samsung Multi View). Accessing this menu always brings up
the window.

Multi Screen Viewing Mode

1. If two or more users each want to watch a different channel or source, use Multi
Screen View mode.

2. To use Samsung Multi View, press the

Multi View on the virtual remote panel.

3. Select Multi Screen View from the pop-up window.

4. Choose the input sources for screens 1 and 2 from the input signal selection

window.

5. Once selections have been made, select Start. The Samsung Multi View guide
screen will appear. Read the guide and then select OK.

To finish watching Samsung Multi View, press the button.

✎

button or, alternatively, select Samsung

2 Player Gaming Mode

Samsung Multi View 3D Glasses

Features

The Samsung Multi View 3D Glasses are used to view 3D or Samsung Multi View
videos. To view 3D or Samsung Multi View videos, you have to use a pair of Samsung
Multi View 3D Glasses with a Samsung S9C TV. The product can establish a
connection with another device through the 2.4GHz or 5GHz RF frequency.

The Samsung Samsung Multi View 3D Glasses are not connected to other

✎

wireless communication devices.
Samsung Multi View and earphones feature are now supported to the only S9C

✎

TV released in 2013.
In the D, E and F series released after 2011, you can use the glasses as regular 3D

✎

glasses without the Samsung Multi View and earphones feature.
Audio is available through the TV speakers or the earphones on the glasses during

✎

normal 3D viewing and only through the earphones on the glasses during Multi
View/Multi View 3D viewing.

− Speakers can be selected from the TV's menu.

Samsung Multi View 3D Glasses At a Glance

1. To use Samsung Multi View, press the button or, alternatively, select Samsung

Multi View on the virtual remote panel.

2. Select 2 Player Gaming mode from the pop-up window.

3. In the screen split selection window, choose up/down or left/right.

4. Once selections have been made, select Start. The Samsung Multi View guide

screen will appear. Read the guide and then select OK.

To finish watching Samsung Multi View, press the button.

✎

English - 18

[S9C-ZG]BN68-05491D-01L04.indb 18 2013-10-31  11:16:21

Screen switch
button

Liquid­crystal shutter

Earphones

LED Indicator

Power/pairing button

Nose pad

Volume control button

The nose pads are

✎

adjustable.

To wear the Samsung Multi View 3D Glasses over eyeglasses, detach the nose

✎

pad from the Samsung Multi View 3D Glasses.
Refer to the next page for details on how to attach and detach the nose pad.

✎

The Samsung Multi View 3D glasses are supplied with pre-installed medium-sized

✎

earphone inserts.
Large-sized and small-sized inserts are supplied as a separate package.

• Operating range

Recommended pairing distance

English

Recommended operating distance

2~6m (6.5 to 19.5 ft)

Using the 3D glasses

Pairing the Samsung Multi View 3D Glasses

What is pairing? Pairing is a process that

✎

establishes a connection between the
Samsung Multi View TV and the Samsung
Multi View 3D Glasses in order to exchange
information.

• To perform pairing

Turn on the TV. Press and hold the Power/
Pairing button on the Samsung Multi View
3D Glasses for 2 seconds or longer to run the pairing operation. On the screen of
the S9C TV, “Samsung Multi View 3D glasses is detected. Do you want to use
this device? Yes/ No” pop-up window appears. If you select Yes, a connection is
established.

Pairing causes a momentary interruption in the audio when listening to audio

✎

through the earphones on the glasses.

• Turning On/Off

If you press the Power/Pairing button briefly, the glasses are turned on and the
green LED is turned on for 3 seconds. If you press the Power/Pairing button briefly
again, the glasses are turned off and the red LED is turned on for 3 seconds.

Recommended pairing distance

50 cm or less (19.5 in)

Recommended operating distance

− Ensure your Samsung TV and Samsung Multi View 3D Glasses are no farther

than 50 cm (19.5 in) apart from each another while pairing is in progress.

− The working distance depends on obstacles (a person, metal, walls, etc.) or

electromagnetic waves.

− Even if you turned the glasses on, the glasses are automatically turned off if the
3D or Samsung Multi View mode of the TV is turned off.

− If the glasses do not work when the TV is in 3D or Samsung Multi View mode,
press the Power button on the glasses briefly again.

− This product is rechargeable. It may not operate due to the dead battery when
you attempt to use it for the first time. In this case, charge the battery.

− If the device is not being used for an extended period of time, charge the
battery once a month.

• Initials pairing

1. Turn on the TV.

2. Press and hold the PAIRING button on the Samsung Multi View 3D Glasses for

more than 2 seconds, and the glasses turns on, starting pairing up.

English - 19

[S9C-ZG]BN68-05491D-01L04.indb 19 2013-10-31  11:16:22

3. On the screen of the S9C TV, the “Samsung Multi View 3D glasses is

USB

detected. Do you want to use this device? Yes/ No” pop-up window
appears. If you select Yes, a connection is established.

4. Enjoy 3D or Samsung Multi View videos after configuring the 3D or Samsung
Multi View function settings on the TV.

− If the pairing fails, the Samsung Multi View 3D Glasses will power off.

− If the first attempt to pair fails, turn the TV off and on again, and then go to

Step 2.

− If pairing is in progress: The LED will blink green and red alternately for 2

seconds.

• How to pair again
Press the PAIRING button on the Samsung Multi View 3D Glasses for more than 2

seconds.

<Pairing is needed again in the following occasions>

− Pairing may be needed again after you have had your S9C TV repaired.

− The pairing operation is required when you purchase and use another S9C TV

released in 2013.

Using the earphones

• Pulling the earphones out
Gently hold the earphones and remove the cable along the groove inside the

glasses.

• Placing the earphones back
Insert the earphones into the corresponding holes in the glasses and insert the

cable into the groove.

Switching the screen

To switch the screen while viewing in Samsung Multi View mode, press the Switch
Screen button on the front of the LED once. When screen 1 is switched to screen 2,
the LED blinks green once and when the screen 2 is switched to screen 1, the LED
blinks green twice.

At the moment when the screen is switched, you will notice flickering through the

✎

glasses.

Controlling the volume

If you press the + volume button on the Samsung Multi View 3D Glasses briefly, the
volume is turned up and if you press the - volume button briefly, the volume is turned
down. If you press and hold one of the volume buttons, the volume is turned up to the
maximum or down to the minimum.

Charging the battery

If the red LED blinks every 2 seconds or you periodically hear a “beep~ beep~” sound
while using the earphones, recharge the battery by connecting the USB cable.

The orange LED blinks every 0.5 second while the battery charges. The green LED
blinks every 2 second when the battery is completely charged.

SAMSUNG TV

PC

USB port

Micro USB cable

Note Book

English - 20

[S9C-ZG]BN68-05491D-01L04.indb 20 2013-10-31  11:16:22

To wear the Samsung Multi View 3D Glasses over eyeglasses

• Placing the earphones back

English

►

To wear the Samsung Multi View 3D Glasses over eyeglasses, detach the

✎

nose pad from the Samsung Multi View 3D Glasses.

• Detaching the nose pad

►

To detach the nose pad, press the bottom portion down with both thumbs,

✎

and then pull the nose pad away from the glasses as shown.

• Attaching the nose pad

►

• Pulling the earphones out

►

Troubleshooting

If you encounter... Try this...

The Samsung Multi View 3D Glasses should be close to the TV.
Move the Samsung Multi View 3D Glasses to within 6m (19.5 ft)

My Samsung Multi View 3D Glasses
do not work

There is no sound

No sound or intermittent sound

The LED keeps blinking. The glasses
make a series of beeps while in use

of the TV.
Try the paring again in order to check if it is completed.
Check the 3D or Samsung Multi View function settings on the TV.
The battery may be low on power. Recharge the battery.
Press the Power button briefl y again.

Press the + volume button of the glasses to turn up the volume.
Pairing causes a momentary interruption in the audio when

listening to audio through the earphones on the glasses. Wait until
pairing is complete.

Try the pairing operation again and check if pairing works.
The battery is low. Charge the battery.

Devices generating electromagnetic waves, such as microwave
ovens and wireless routers, can cause abnormal TV sound. Keep
such devices, including mobile communication devices, as far
away from the TV as possible.

The battery is low. Charge the battery.

►

English - 21

[S9C-ZG]BN68-05491D-01L04.indb 21 2013-10-31  11:16:24

Specifications (Model no.: SSG-5900CR)

Troubleshooting and Other Information

Shutters Liquid crystal Transmittance 35%

Optics

Weight SSG-5900CR 42g /1.5oz.

Power Glasses Built-in 3.7V Lithium polymer battery

Power consumption

Operating
conditions

Product specifications may be changed without notice in order to enhance

✎

product performance.
The continuous operating time may differ depending on the wireless

✎

communication environment and usage conditions.

Recommended
operating distance

Glasses

Battery

Operating temperature 50°F ~ 104°F (10°C ~ 40°C)

Custody temperature -4°F ~ 140°F (-20°C ~ 60°C)

2 ~ 6m (6.5 to

19.5 ft)

When viewing the screen only: 1.3mA, When listening to sound
through the earphones: 37mA

Type 110mAh, 3.7V

Operating time

Field rate

Viewing 3D: 80 hours,
Viewing Samsung Multi View: 3 hours

When viewing 3D:
120 Hz

When viewing
Samsung
Multi View: 240 Hz

What is Remote Support?

Samsung Remote Support service offers you one-on-one support with a Samsung
Technician who can remotely:

• Diagnose your TV

• Adjust the TV settings for you

• Perform a factory reset on your TV

• Install recommended firmware updates

How Does it Work?

Having a Samsung Tech remotely service your TV is really pretty simple

[ Recommendation ]- EU ONLY

1. Call the Samsung Contact Centre

and ask for remote support.

2. Open the menu on your TV and go
to the Support section.

Hereby, Samsung Electronics, declares that this Samsung Multi View 3D Glasses is in
compliance with the essential requirements and other relevant provisions of Directive
1999/5/EC.

This equipment may be operated in all EU countries.

3. Select Remote Management and
Provide the Pin# to the agent.

4. The agent will then access your TV.

That's it!

English - 22

[S9C-ZG]BN68-05491D-01L04.indb 22 2013-10-31  11:16:24

Troubleshooting

If you have any questions about the TV, first refer to this list. If none of these
troubleshooting tips apply, please visit “www.samsung.com,” then click on Support, or
contact the call centre listed on the back-cover of this manual.

Issues Solutions and Explanations

The TV won’t turn on. • Make sure the AC power cord is securely plugged in to the wall outlet and

There is no picture/video. • Check the cable connections. Remove and reconnect all cables connected

The remote control does
not work.

The cable/set top box
remote control doesn’t turn
the TV on or off or adjust
the volume.

This panel uses a panel consisting of sub pixels which require sophisticated

✎

technology to produce. There may be, however, be a few bright or dark pixels on
the screen. These pixels will have no impact on the performance of the product.

To keep your TV in optimum condition, upgrade to the latest firmware on the

✎

Samsung web site by USB (Samsung.com > Support > Downloads).
Some of above pictures and functions are available at specific models only.

✎

the TV.

• Make sure the wall outlet is working.

• Try pressing the

remote. If the TV turns on, refer to “Remote control does not work” below.

to the TV and external devices.

• Set the video outputs of your external devices (Cable/Sat Box, DVD, Blu­ray etc) to match the TV's input connections. For example, if an external
device’s output is HDMI, it should be connected to an HDMI input on the TV.

• Make sure your connected devices are powered on.

• Be sure to select the correct input source.

• Reboot the connected device by unplugging it, and then reconnecting the

device’s power cable.

• Replace the remote control batteries. Make sure the batteries are installed
with their poles (+/–) in the correct direction.

• Clean the sensor’s transmission window on the remote.

• Try pointing the remote directly at the TV from 5~6 feet away.

• Programme the Cable/Set remote control to operate the TV. Refer to the

Cable/Set-Top-Box user manual for the SAMSUNG TV code.

P

button on the TV to make sure the problem is not the

Eco Sensor and Screen Brightness

Eco Sensor measures the light in your room and optimizes the brightness of the TV
automatically to reduce power consumption. This causes the TV to brighten and dim
automatically. If you want to turn this function off, go to Screen Menu > System > Eco

Solution > Eco Sensor

Eco Sensor

Do not block the sensor with any material. It can decrease picture brightness.

1. Eco Sensor: This power-saving feature automatically adjusts the screen brightness

of the TV according to the ambient light intensity detected by the Light Sensor.

2. To enable or disable Eco Sensor, go to Screen Menu > System > Eco Solution >
Eco Sensor and select On or Off.

3. Precaution: If you find the screen too dark while watching the TV in a dark area, this
may be caused by the Eco Sensor.

English

English - 23

[S9C-ZG]BN68-05491D-01L04.indb 23 2013-10-31  11:16:24

Storage and Maintenance

TV Upgrade using One Connect

If a sticker was attached to the TV screen, some debris can remain after you

✎

remove the sticker. Please clean the debris off before watching TV.
The exterior and screen of the product can get scratched during cleaning. Be sure

✎

to wipe the exterior and screen carefully using a soft cloth to prevent scratches.

Do not spray water directly onto the
product. Any liquid that goes into the
product may cause a failure, fire, or
electric shock.

Clean the product with a soft cloth
dampened with a small amount of water.
Do not use a flammable liquid (e.g.
benzene, thinners) or a cleaning agent.

(sold separately)

One Connect

(sold separately)

TV

Connecting One Connect (sold separately) to a Samsung TV will allow you to enjoy the
latest features and content without having to purchase a new TV. Experience the latest
features and services offered by Samsung Electronics via One Connect.

One Connect is sold separately. Purchasing One Connect will allow you to

✎

upgrade the software to the version from the year in which your One Connect was
released. Not supported on all models.

English - 24

[S9C-ZG]BN68-05491D-01L04.indb 24 2013-10-31  11:16:25

Specifications

Specifications

Display Resolution
Environmental Considerations

Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity

Stand Swivel (Left / Right)
Model Name
Screen Size

(Diagonal)
Sound

(Output)
Dimensions (W x H x D)

Body
With stand

Weight
With Stand

Design and specifications are subject to change without prior notice.

✎

For information about the power supply, and more about power consumption,

✎

refer to the label attached to the product.
Typical power consumption is measured according to IEC 62087 Ed.2

✎

Standby mode

1920 x 1080

50°F to 104°F (10°C to 40°C)

10% to 80%, non-condensing

-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing

0˚

KE55S9C

55 inches

40W (10 x 2, woofer 20 x 1)

1418.1 x 777.7 x 135.6 mm

1418.1 x 777.7 x 359.7 mm

27.2 Kg

30.9 Kg

Recommendation - EU Only

• Hereby, Samsung Electronics, declares that this TV is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.

• The official Declaration of Conformity may be found at http://www.samsung.com,
go to Support > Search Product Support and enter the model name.

• This equipment may only be used indoors.

• This equipment may be operated in all EU countries.

Licences

English

To decrease power consumptionunplug the power cord when you don't use the TV for
a long time.

English - 25

[S9C-ZG]BN68-05491D-01L04.indb 25 2013-10-31  11:16:25

Wichtige Sicherheitshinweise

Achtung! Wichtige Sicherheitshinweise

(Bitte lesen Sie den Ihrem Samsung-Gerät entsprechenden Abschnitt, bevor Sie dieses

ACHTUNG

STROMSCHLAGGEFAHR NICHT ÖFFNEN

ACHTUNG: UM DIE GEFAHR EINES ELEKTRISCHEN
SCHLAGES ZU VERRINGERN, ENTFERNEN SIE NICHT DIE
ABDECKUNG (ODER RÜCKSEITE). IM GERÄTEINNEREN
BEFINDEN SICH KEINE VOM BENUTZER ZU WARTENDEN
TEILE. LASSEN SIE REPARATUREN NUR VON QUALIFIZIERTEM
KUNDENDIENSTPERSONAL DURCHFÜHREN.

• Die Schlitze und Öffnungen im Gehäuse und in der Rückwand oder im Boden sind für die Belüftung
erforderlich. Um den zuverlässigen Betrieb des Geräts zu gewährleisten und es vor Überhitzung zu
schützen, dürfen diese Öffnungen keinesfalls blockiert oder bedeckt werden.

− Stellen Sie das Gerät nicht in abgeschlossene Räume wie z.B. in ein Bücherregal oder einen Einbauschrank.

Dieser Einbau ist nur dann zulässig, wenn für ausreichende Belüftung gesorgt wird.

− Außerdem darf das Gerät keinesfalls in der Nähe oder über einem Radiator oder Heizkörper aufgestellt

werden, oder an Orten, an denen es direkter Sonneneinstrahlung ausgesetzt ist.

− Stellen Sie keine mit Flüssigkeit gefüllte Behälter (Vasen usw.) auf das Gerät, da dies zu einem Brand oder

Stromschlag führen kann.

• Setzen Sie das Gerät keinesfalls Regen aus, und stellen Sie es nicht in der Nähe von Wasser auf
(Badewanne, Küchenspüle, feuchter Keller, Schwimmbecken usw.). Falls das Gerät dennoch Nässe
ausgesetzt war, trennen Sie es von der Stromversorgung und wenden Sie sich umgehend an den
nächstgelegenen Händler. Ziehen Sie vor dem Reinigen des Geräts den Netzstecker aus der Steckdose.

• Für dieses Gerät benötigen Sie Batterien. Entsorgen Sie die Batterien gemäß den regionalen
Umweltschutzbestimmungen. Bitte wenden Sie sich bei Fragen zur ordnungsgemäßen Entsorgung an Ihre
örtlichen Behörden.

• Überlasten Sie Steckdosen, Verlängerungskabel und Netzteile keinesfalls, da dies zu einem Brand oder
Stromschlag führen kann.

• Netzkabel müssen so verlegt werden, dass niemand auf das Kabel treten kann oder es durch Gegenstände
gequetscht wird, die auf dem Kabel stehen oder gegen das Kabel drücken. Besondere Aufmerksamkeit
muss den Bereichen um Stecker, Steckdosen und dem Punkt zukommen, an dem das Netzkabel aus dem
Gerät herausgeführt wird.

• Zum Schutz des Geräts bei einem Gewitter oder längerem Nichtbetrieb trennen Sie das Gerät vom Netz.
Trennen Sie darüber hinaus das Antennenkabel vom Gerät. Auf diese Weise werden Schäden durch
Blitzschlag oder Spannungsstöße vermieden.

• Stellen Sie sicher, dass die Nennspannung des Gleichstromnetzteils für die örtliche Stromversorgung
geeignet ist, bevor Sie das Netzkabel an die Stromversorgung anschließen.

installieren.)

Dieses Symbol weist auf eine hohe
Spannung im Inneren des Geräts
hin. Das Berühren von Teilen im
Geräteinneren ist gefährlich.

Dieses Symbol weist darauf hin, dass
diesem Gerät wichtige Anweisungen
zu Betrieb und Wartung beigefügt
sind.

• Führen Sie niemals Metallgegenstände in die Öffnungen dieses Geräts ein. Dies kann zu Stromschlägen
führen.

• Berühren Sie keinesfalls Bauteile im Geräteinneren, um Stromschläge zu vermeiden. Das Gerät darf nur von
einem qualifizierten Techniker geöffnet werden.

• Stellen Sie sicher, dass das Netzkabel fest in die Steckdose eingestöpselt wird. Fassen Sie das Netzkabel
am Stecker an, wenn Sie es aus der Wandsteckdose ziehen. Berühren Sie das Netzkabel niemals mit
feuchten Händen.

• Wenn das Gerät nicht einwandfrei funktioniert, insbesondere beim Auftreten ungewöhnlicher Geräusche
oder Gerüche aus dem Inneren, trennen Sie es unverzüglich von der Stromversorgung und wenden Sie sich
umgehend an Ihren nächstgelegenen Händler oder das nächste Kundendienstzentrum.

• Ziehen Sie auf jeden Fall den Netzstecker aus der Steckdose, wenn das Fernsehgerät längere Zeit nicht
verwendet werden soll, weil Sie beispielsweise längere Zeit abwesend sind (besonders wenn Kinder und
ältere Personen allein im Haus bleiben).

− Staubansammlungen können Stromschläge, Kurzschlüsse oder Brände verursachen, da am Netzkabel

Funken auftreten oder die Hitze zu einer Beschädigung der Isolierung führt.

• Wenden Sie sich an den autorisierten Kundendienst, wenn das Gerät an einem Ort mit hoher Konzentration
an Staubpartikeln, außergewöhnlich hoher oder geringer Raumtemperatur, extrem hoher Luftfeuchtigkeit,
in unmittelbarer Nähe zu chemischen Lösungsmitteln oder für den Dauerbetrieb, z. B. auf Bahn- oder
Flughäfen, aufgestellt werden soll.

• Eine nicht fachgerechte Aufstellung kann zu schweren Schäden am Gerät führen.

• Verwenden Sie nur ordnungsgemäß geerdete Stecker und Steckdosen.

− Eine fehlerhafte Erdung kann zu einem elektrischen Schlag oder Schäden am Gerät führen. (Nur Geräte der

Klasse I.)

• Wenn Sie das Gerät vom Stromnetz trennen möchten, müssen Sie den Netzstecker aus der Dose ziehen.
Deshalb muss der Netzstecker jederzeit leicht erreichbar sein.

• Achten Sie darauf, dass sich Kinder nicht an das Gerät hängen.

• Lagern Sie die Zubehörteile (Batterie usw.) an einem sicheren Ort außerhalb der Reichweite von Kindern.

• Bringen Sie das Gerät nicht an einem instabilen Ort wie z.B. einem wackligen Regal, einem abschüssigen

Boden oder einem Ort an, der Vibrationen ausgesetzt ist.

• Lassen Sie das Gerät nicht fallen, und vermeiden Sie Erschütterungen. Wenn das Gerät beschädigt ist,
trennen Sie es vom Stromnetz, und wenden Sie sich an ein Kundendienstzentrum.

• Ziehen Sie den Netzstecker aus der Steckdose, und wischen Sie das Gerät mit einem weichen,
trockenen Tuch ab. Verwenden Sie keine Chemikalien wie Wachs, Benzol, Alkohol, Verdünner, Insektizide,
Luftverbesserer, Schmiermittel oder Reinigungsmittel. Hierdurch kann das Aussehen des Geräts beschädigt
oder der Aufdruck entfernt werden.

• Es dürfen keinesfalls Flüssigkeitstropfen oder-spritzer in das Gerät eindringen.

• Entsorgen Sie Batterien niemals in einem Feuer.

• Schließen Sie die Batterien nicht kurz, zerlegen und überhitzen Sie sie nicht.

• Bei unsachgemäßem Austausch von Batterien besteht Explosionsgefahr. Setzen Sie nur

Batterien des gleichen oder eines gleichwertigen Typs ein.

• ACHTUNG: UM DIE AUSBREITUNG VON FEUER ZU VERHINDERN, SORGEN SIE
JEDERZEIT DAFÜR, DASS DAS GERÄT NICHT MIT KERZEN ODER OFFENEM FEUER IN
BERÜHRUNG KOMMT.

Deutsch - 2

[S9C-ZG]BN68-05491D-01L04.indb 2 2013-10-31  11:16:26

Die Abbildungen und Illustrationen in diesem Handbuch dienen nur zur Information und können vom tatsächlichen Aussehen des Geräts abweichen. Änderungen an Ausführung
und technischen Daten vorbehalten.

Einige GUS-Sprachen (Russisch, Ukrainisch, Kasachisch) stehen für dieses Produkt nicht zur Verfügung, da das Gerät für Kunden in der EU hergestellt wurde.

Funktionen Ihres neues Fernsehgeräts

• 3D: Mit dieser neuen Funktion können Sie Inhalte räumlich anzeigen.

• SMART HUB:

Dieser Fernseher verfügt über Smart Hub, ein Unterhaltungs- und Familienzentrum
für viele verschiedene Anwendungsgebiete. Mit Smart Hub können die Benutzer
im Internet surfen, Anwendungen herunterladen und über soziale Netzwerke mit
Familie und Freunden in Kontakt bleiben. Darüber hinaus können Sie Fotos, Videos,
Musik und Dateien von einem externen Speichermedium genießen.

Drücken Sie zum Starten von Smart Hub die Taste
Symbolen im oberen Bereich des Bildschirms einen Dienst aus.

Meine sozialen Netzwerke: Schauen Sie sich die neuesten YouTube-Videos
und die auf Facebook und Twitter geposteten Videos Ihrer Freunde an. Auch
können Sie Videotelefonate mit Ihren Freunden führen, sofern Sie die TV-Kamera
angeschlossen haben.

Meine TV - Apps: Hiermit laden Sie Anwendungen herunter, wie z.B. einen
Webbrowser, und installieren sie auf Ihrem Gerät.

Meine TV-Programme: Hiermit zeigen Sie eine Liste der Sendungen an, die zurzeit
oder später ausgestrahlt werden. (Je nach Land)

Meine Filme & Serien: Sie können Filme und Serien ohne separates externes
Gerät erwerben und ansehen. (Je nach Land)

Meine Fotos, Videos & Musik: Wiedergabe und Anzeige von Fotos, Videos und
Musikdateien von einem externen Speichergerät.

• Anynet+ (HDMI-CEC): Mit dieser Funktion können Sie alle angeschlossenen

Samsung-Geräte, die Anynet+ unterstützen, mit der Fernbedienung für Ihr
Samsung-Fernsehgerät bedienen.

• e-Manual: Ihr Fernsehgerät verfügt über eine eingebaute und detaillierte

elektronische Bedienungsanleitung. (Seite 15)

™

. Wählen Sie mit den

• SMART Interaction: Mit Hilfe dieser Funktion können Sie durch Sprache oder

Gesten auf Menüoptionen und Funktionen zugreifen und diese ausführen oder
bearbeiten.

Voice Interaction ist in der Schweiz in deutscher Sprache verfügbar.

✎

• Gerätemanager: Hier können Sie eine über USB oder Bluetooth angeschlossene

Tastatur oder Maus zur Verwendung mit den Funktionen des Fernsehgeräts
auswählen.

• MHL & Bildschirmspiegelung: Mit Hilfe einer drahtlosen oder kabelgebundenen

Verbindung können Sie die Bildschirme Ihrer Mobilgeräte auf dem großen
Fernsehbildschirm anzeigen.

Ordnungsgemäße Entsorgung dieses Geräts (Elektro- & Elektronik-Altgeräte)
(Anwendbar in Ländern mit Systemen zur getrennten Sammlung von Wertstoffen).

Diese Kennzeichnung auf dem Gerät, dem Zubehör oder der Dokumentation bedeutet, dass das Gerät
sowie das elektronische Zubehör (z.B. Ladegerät, Headset, USB-Kabel) am Ende ihrer Lebensdauer
nicht im normalen Hausmüll entsorgt werden dürfen. Entsorgen Sie diese Geräte bitte getrennt von
anderen Abfällen, um der Umwelt bzw. der menschlichen Gesundheit nicht durch unkontrollierte
Müllbeseitigung zu schaden. Recyceln Sie das Gerät, um die nachhaltige Wiederverwertung von
stofflichen Ressourcen zu fördern.

Private Nutzer sollten den Händler, bei dem das Produkt gekauft wurde, oder die zuständigen Behörden
kontaktieren, um in Erfahrung zu bringen, wie sie das Gerät auf umweltfreundliche Weise recyceln
können.

Gewerbliche Nutzer wenden sich an ihren Lieferanten und überprüfen die Konditionen ihres
Kaufvertrags. Dieses Gerät und seine elektronischen Zubehörteile dürfen nicht zusammen mit anderem
Gewerbemüll entsorgt werden.

Ordnungsgemäße Entsorgung der Batterien dieses Produkts
(Anwendbar in Ländern mit Systemen zur getrennten Sammlung von Wertstoffen).

Diese Kennzeichnung auf der Batterie, dem Handbuch oder der Verpackung bedeutet, dass die Batterie
am Ende ihrer Lebensdauer nicht im normalen Hausmüll entsorgt werden darf. Die Kennzeichnung mit
den chemischen Symbolen für Hg, Cd oder Pb bedeutet, dass die Batterie Quecksilber, Cadmium oder
Blei in Mengen enthält, die die Grenzwerte der EU-Direktive 2006/66 übersteigen. Wenn Batterien nicht
ordnungsgemäß entsorgt werden, können diese Substanzen die Gesundheit von Menschen oder die
Umwelt gefährden.

Zum Schutz der natürlichen Ressourcen und zur Förderung der Wiederverwertung von Materialien
trennen Sie die Batterien von anderem Müll, und führen Sie sie Ihrem örtlichen Recyclingsystem zu.

Deutsch

Deutsch - 3

[S9C-ZG]BN68-05491D-01L04.indb 3 2013-10-31  11:16:26

Zubehör

Vergewissern Sie sich, dass im Lieferumfang des Fernsehgeräts folgende

✎

Komponenten enthalten sind. Falls irgendwelche Teile fehlen sollten, setzen Sie
sich bitte mit Ihrem Händler in Verbindung.

Farbe und Form der Teile können sich je nach Modell unterscheiden.

✎

Kabel, die nicht zum Paketinhalt gehören, können gesondert erworben werden.

✎

Achten Sie darauf, dass Sie beim Auspacken keine Zubehörteile übersehen, die

✎

durch Verpackungsmaterialien verdeckt werden.

• Smart Touch Control & 2 Batterien (Typ AAA)

• Fernbedienung & 2 Batterien (Typ AAA) • Samsung 3D-Aktivbrille

• Benutzerhandbuch • Vorschriftenhandbuch

• Garantiekarte (nicht überall verfügbar) • Reinigungstuch

Scart-Adapter AV-Adapter Komponentenadapter

IR-Verlängerungskabel Funktastatur (separat erhältlich) One Connect-Kabel

One Connect Ferritkern (1 Stk.) CI-Kartenadapter

• Netzkabel

Verwenden des Ferritkerns : Verwenden Sie den mitgelieferten

✎

Ferritkern, um das One Connect-Kabel für den Anschluss
des One Connect-Hubs an das Fernsehgerät vor
elektromagnetischen Störungen zu schützen. Öffnen Sie
den Ferritkern, legen Sie wie in der Abbildung gezeigt das
One Connect-Kabel in einer Schlaufe um den Ferritkern, und
verbinden Sie anschließend den One Connect-Hub über das
Kabel mit dem Fernsehgerät.

• Verwaltungskosten werden abgerechnet, wenn:

− (a) auf Ihren Wunsch ein Ingenieur zu Ihnen geschickt wird, und es liegt kein

Defekt des Geräts vor (d. h. wenn Sie dieses Benutzerhandbuch nicht gelesen
haben)

− (b) Sie das Gerät in eine Reparaturwerkstatt bringen, und es liegt kein Defekt

des Geräts vor (d. h. wenn Sie dieses Benutzerhandbuch nicht gelesen haben)

• Der abgerechnete Betrag wird Ihnen mitgeteilt, ehe irgendwelche Arbeiten oder
Kundenbesuche ausgeführt werden.

Warnung bei Standbildern

Vermeiden Sie d
Standbildelementen (wie z. B. Senderlogos, Laufschriften mit Aktieninformationen oder
Nachrichten am unteren Bildschirmrand usw.) und die Anzeige von Programmen im
Panorama- oder 4:3-Format auf dem Bildschirm Durch lang anhaltende Anzeige von
Standbildern kann es zum Einbrennen von Bildern auf dem OLED-Bildschirm kommen,
wodurch die Bildqualität beeinträchtigt wird. Um die Gefahr dieses Effekts zu vermindern,
befolgen Sie bitte die nachfolgenden Empfehlungen:

• Vermeiden Sie es, für lange Zeit denselben Fernsehsender anzuzeigen.

• Versuchen Sie immer, Bilder als Vollbild anzuzeigen. Verwenden Sie das Bildformat-
Menü des Fernsehers, um bestmögliche Übereinstimmung zu erzielen.

• Durch Reduzieren von Helligkeit und Kontrast tragen Sie dazu bei, das Entstehen von
Nachbildern zu vermeiden.

• Nutzen Sie alle Funktionen Ihres Fernsehgeräts, mit denen Nachbilder und das
Einbrennen von Bildern reduziert werden. Weitere Informationen finden Sie im
Benut

ie Anzeige von Standbildern (wie z. B. JPEG-Bilddateien) oder

zerhandbuch.

Deutsch - 4

[S9C-ZG]BN68-05491D-01L04.indb 4 2013-10-31  11:16:27

Grundfunktionen

Verwenden der Smart Touch Control

Anzeigen und Auswählen der verfügbaren

Videosignalquellen.

Ein- bzw. Ausschalten des Fernsehgeräts.

Vorübergehendes Ausschalten des

Tons.

Wenn Sie diese Taste gedrückt halten,

können Sie auf die Optionen unter

Audio f. Sehgesch. und Untertitel

zugreifen. (Je nach Land oder Region.)

Einstellen der Lautstärke.

Touchpad

• Sie können den Fokus auf dem Bildschirm

verschieben, indem Sie den Finger entsprechend

über das Touchpad ziehen.

• Tippen Sie auf das Touchpad, um das markierte
Element auszuführen, zu aktivieren oder

auszuwählen.

• Halten Sie den Finger auf dem Touchpad

gedrückt, um das Fenster Senderliste zu öffnen.

RECOMM.: Anzeigen aktueller und programmierter

Sendungen sowie von Empfehlungen für Anwendungen.

SEARCH: Geben Sie ein Suchkriterium ein, um

sowohl auf dem Fernsehgerät als auch im Web nach

verschiedenen Anwendungen und ihren Inhalten zu

suchen.

Zurück zum vorherigen Menü. Halten Sie diese

Taste gedrückt, um alle laufenden Anwendungen zu

beenden.

Sie können das Mikrofon verwenden, um die Befehle der Spracherkennung einzugeben.
Drücken Sie dazu einfach die Taste VOICE˜.

Spracherkennung kann durch undeutliche Aussprache, Lautstärke oder

✎

Umgebungsgeräusche beeinträchtigt werden.

Ein- bzw. Ausschalten des an das Fernsehgerät angeschlossenen Kabel­oder Satellitenreceivers. Dazu muss die Smart Touch Control jedoch als
Universalfernbedienung konfiguriert werden.

VOICE

˜

Wählen Sie die Spracheingabe, und sprechen Sie einen Text.

Wechseln des Senders.

Hiermit zeigen Sie auf dem Bildschirm eine virtuelle Fernbedienung an. Weitere
Informationen finden Sie im Kapitel Steuern des Fernsehgeräts > Verwenden der

virtuellen Fernbedienung des e-Manuals.

Halten Sie die Taste MORE gedrückt, um schnell eine gewünschte Funktion
auszuwählen (z.B. MENU (m), TOOLS (T), INFO (`) usw.).

Tippen Sie beim Fernsehen rechts oder links auf dem Touchpad auf die vorstehende
Linie, um auf dem Bildschirm das Fenster zum Eingeben von Ziffern zu öffnen.
Die Farbtasten arbeiten unterschiedlich, je nachdem welche Funktion das Fernsehgerät
gerade ausführt.

MULTI VIEW (
MULTI VIEW (

mit Hilfe von Bildschirm 1 und Bildschirm 2 den zu bedienenden Bildschirm auswählen.

`: Anzeigen von Informationen auf dem Bildschirm.

: Aktivieren bzw. Deaktivieren der 3D-Funktion. Weitere Informationen finden Sie im

Kapitel Fernsehen > 3D-Fernsehen.

Anzeigen des Programmplans mit den Sendezeiten für jeden Digitalsender. Zudem
können Sie die Funktion Wiedergabe planen oder Aufnahme programmieren
programmieren, indem Sie eine später ausgestrahlte Sendung markieren und auf das
Touchpad tippen.

Hiermit öffnen Sie die Smart Hub-Anwendungen. Weitere Informationen finden Sie im
Kapitel Smart TV-Funktionen > Smart Hub des e-Manuals.

Zum Beenden einer Anwendung, die gerade ausgeführt wird, drücken Sie die Taste ™.

✎

): Aktivieren bzw. deaktivieren der Funktion Samsung-Multiansicht.

): Bei Verwendung der Funktion Samsung-Multiansicht können Sie

Deutsch

Deutsch - 5

[S9C-ZG]BN68-05491D-01L04.indb 5 2013-10-31  11:16:28

Verbinden mit dem Fernsehgerät

Damit Sie d
zunächst ein Pairing der beiden Geräte via Bluetooth durchführen. Die Smart Touch Control
kann jedoch nur mit verbundenen Fernsehgeräten von Samsung verwendet werden.

✎

1. Richten Sie die Smart Touch Control auf den Fernbedienungsempfänger des

2. In der unteren linken Ecke des Bildschirms wird ein Bluetooth-Symbol angezeigt

Erneutes Verbinden der Smart Touch Control

as Fernsehgerät mit einer Smart Touch Control bedienen können, müssen Sie

Wir empfehlen, die Smart Touch Control innerhalb eines Bereichs von maximal 6 m zu
verwenden. Der Betriebsbereich ist abhängig von den Umgebungsbedingungen für die
Drahtloskommunikation.

ausgeschalteten Fernsehgeräts, und drücken Sie dann die Taste „TV“, um das Pairing­Verfahren erstmals zu starten. Nur durch Drücken dieser Taste wird ein IR-Signal
gesendet. Der Fernbedienungsempfänger des Fernsehgeräts befi ndet sich je nach
Modell an unterschiedlichen Stellen.

(siehe nachfolgende Abbildung). Das Fernsehgerät versucht dann, automatisch eine
Verbindung z

ur Smart Touch Control herzustellen.

<Symbole bei Verbindungsaufbau und erfolgreich hergestellter Verbindung>

<Pairing-Taste der Smart Touch Control>
Wenn die Smart Touch Control nicht mehr funktioniert oder

ungewöhnlich reagiert, tauschen Sie die Batterie aus, da das
Problem möglicherweise durch eine zu geringe Batterieladung
hervorgerufen wird. Wenn das Problem weiterhin besteht,
drücken Sie die Taste PAIRING auf der Smart Touch Control,
um das Pairing-Verfahren mit dem Fernsehgerät zu wiederholen.
Die Taste PAIRING sehen Sie, wenn Sie die Batterieabdeckung
der Smart Touch Control entfernen. Richten Sie die Smart
Touch Control aus einer Entfernung von 30cm bis 4m auf
den Empfänger am Fernsehgerät, und drücken Sie die Taste

PAIRING. Nach Abschluss des Pairing-Verfahrens wird unten

links auf dem Fernsehbildschirm das Pairing-Symbol angezeigt.

Warnung bei zu schwach geladener Batterie

Wenn die Batterieladung bei Verwendung der Smart Touch Control
nachlässt und die Batterieanzeige blinkt, erscheint unten links auf
dem Bildschirm das folgende Alarm-Fenster. Sobald das Alarm­Fenster angezeigt wird, müssen Sie die Batterien der Smart Touch
Control austauschen. Verwenden Sie Alkaline-Batterien, da diese
eine längere Lebensdauer besitzen.

Einlegen der Batterien (2x Typ AAA)

1

2

1. Heben Sie die Abdeckung des Batteriefachs mit Hilfe einer Kunststoffkarte

ein wenig an. Ziehen Sie dann mit einem Fingernagel an der Kerbe der
Batteriefachabdeckung, und entfernen Sie die Abdeckung vollständig.

Suchen Sie nach der Aussparung an der Batteriefachabdeckung. Die Position

✎

der Aussparung kann je nach Typ der im Lieferumfang des Fernsehgeräts
enthaltenen Smart Touch Control unterschiedlich sein.

2. Legen Sie 2 AAA-Batterien ein, und achten Sie dabei auf die richtige Polung

(positive und negative Seite der Batterien).

3. Legen Sie die Batterieabdeckung parallel zur Öffnung auf die Rückseite der

Fernbedienung, und drücken Sie an den Kanten entlang, bis der Deckel ordentlich
in das Gehäuse der Fernbedienung eingerastet ist.

3

Deutsch - 6

[S9C-ZG]BN68-05491D-01L04.indb 6 2013-10-31  11:16:28