Samsung i400 Disassembly & Reassembly
Disassembly and Assembly Instructions
7.
Disassembly
7-1.
1
Unscrew blue-marked4bolts.
1)
2
disassemblearear cover case by using the
1)
tool from the bottom.
be cautious not to damage the hook)
(
43
Unscrew red-marked2bolts
1)
take apart SPK bracket.
2)
Remove stereo SPK
3)
be careful not to damage FPCB connector.)
(
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Remove Volume Key and CAM activation Key.
1)
7-1
Exploded View and Parts List
5
when it's in the state of"Slide-Up",
1.
take apart PBA from the mobile.
Put it back to"Slide-Down" and detach
2.
PBA from the sticky tape.
6
Disconnect"Sliding FPCB" from the PBA.
1.
by using the tip of the thumb.
87
Remove rubber caps in the upper and
1.
unscrew red-marked4bolts
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
in the state of"Slide-up", using the tool,
1.
disassemble the upper and the lower along
the dashed arrow
7-2
Exploded View and Parts List
9
As shown above, in the state of"Slide-
1.
Down", pull out the FPCB from the lower.
be careful of the damage on the FPCB)
(
10
Remove green shielding tape shown above.
1.
11
Open up the lid and remove the conduction tape
1.
on the main FPCB.
detach the main FPCB from the sub-PCB
2.
be careful of the damage on the FPCB)
(
12
Using the pinch, detach the vibration motor..
1.
Using the pinch, detach the RCV Speaker.
2.
Be careful of the damage on the wire.)
(
7-3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Loading...