Samsung HW-D650S-ZA User Manual

HW-D600 HW-D650S

AV Receiver System

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

HW-D600_D650S_XAA_0616.indd 1HW-D600_D650S_XAA_0616.indd 1 2011-06-16  10:26:552011-06-16  10:26:55

Safety Information

Safety Warnings

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates “dangerous voltage”

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING

To reduce the risk of ﬁ re or electric shock, do not expose this appliance to rain or moisture.

•

To prevent injury, this apparatus must be securely attached to the ﬂ oor/wall in accordance with the installation

•

instructions.

CAUTION

•

Apparatus shall not be exposed to dripping or splashing and no objects ﬁ lled with liquids, such as vases, shall be placed on the apparatus.

•

The Mains plug is used as a disconnect device and shall stay readily operable at any time.

This product satisﬁ es FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections.

FCC NOTE (FOR U.S.A):

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Caution : FCC regulations state that any unauthorized changes or modiﬁ cations to this equipment may void the user's authority to operate it.

inside the product that presents a risk of electric shock or personal injury.

This symbol indicates important instructions accompanying the product.

License

•

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535;

•

7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD Master Audio | Essential, and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

2 English

HW-D600_D650S_XAA_0616.indd 2HW-D600_D650S_XAA_0616.indd 2 2011-06-16  10:27:062011-06-16  10:27:06

Important Safety Instructions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE: FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth an uncontrolled environment. This equipment should be installed and operated with minimum distance 7.9 inches between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Canadian Department of Communications Radio Interference Regulations

This digital apparatus (Wireless Internet Radio) does not exceed the Class B limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications.

Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.

1) Read these instructions.

2) Keep these Instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁ ers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not ﬁ t into your outlet, consult an electrician for replacement of the obsolete outlet.

10)

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachment/accessories speciﬁ ed by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table speciﬁ ed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualiﬁ ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

English 3

HW-D600_D650S_XAA_0616.indd 3HW-D600_D650S_XAA_0616.indd 3 2011-06-16  10:27:062011-06-16  10:27:06

Safety Information

Precautions

Ensure that the AC power supply in your house complies with speciﬁ cations listed on the identiﬁ cation sticker

•

located on the back of your product.

Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation

•

(7.5~10cm / 20~25 inches).

Do not place the product on ampliﬁ ers or other equipment which may become hot.

•

Make sure the ventilation slots are not covered.

Do not stack anything on top of the product.

•

To disconnect the product completely from the power supply, remove its plug from the wall outlet.

•

- If you leave the product unused for a long period of time, disconnect the plug from the wall outlet.

During thunderstorms, disconnect the AC plug from the wall outlet. Voltage spikes caused by lightning could

•

damage the product.

Do not expose the product to direct sunlight or other heat sources. This could cause the product to overheat

•

and malfunction.

Protect the product from moisture, excess heat, and equipment creating strong magnetic or electric ﬁ elds (i.e.

•

speakers.).

Disconnect the power cable from the AC supply if the product malfunctions.

•

Your product is not intended for industrial use. It is for personal use only.

•

Condensation may occur if you store your product in cold temperatures. If transporting the product during the

•

winter, wait approximately 2 hours until the product has reached room temperature before using.

The batteries used with this product contain chemicals that are harmful to the environment.

•

Do not dispose of batteries in the general household trash.

4 English

HW-D600_D650S_XAA_0616.indd 4HW-D600_D650S_XAA_0616.indd 4 2011-06-16  10:27:062011-06-16  10:27:06

Contents

SAFETY INFORMATION

GETTING STARTED

CONNECTIONS

SETUP

2 Safety Warnings 3 Important Safety Instructions 4 Precautions

7 Key features of your new AV Receiver 8 Accessories 9 Description 9 Front Panel 10 Display 11 Rear Panel 12 Remote Control

15 Speaker Positioning 17 Connecting the Speakers 19

Connecting External Devices/your TV via HDMI

HDMI Function

Connecting to your TV

Connecting a DVD or BD(Blu-ray) Player 23 Connecting a Cable, Satellite or Set-top Box 24 Connecting a CD Player 25 Connecting Using the External Ampliﬁ er 26 Connecting an iPod 28 Connecting the FM Antenna 28 Connecting AUX Components

29 Before Using the AV Receiver 29 Home Menu 30 Selecting Digital/HDMI/Analog 31 Setup Menu Tree 34 Audio Setup 34 Selecting a Source Device And Connection Jack

(Digital Audio In) 34 Setting the Speaker Size 36 Connection Setting For Surround Back 37 Setting the Speaker Listening Distance 38 Setting the Speaker Level 39 Setting the Test Tone 40 Setting Dolby Pro Logic Mode 40 Surround Setup 40 Setting Dolby Pro Logic IIx 41 Setting NEO:6 Mode 41 Setting EX/ES Mode 42 Other Settings 42 Audio Sync 42 Tone Control 43 MP3 Enhancer 43 Smart Volume 44 Auto Calibration Setup 45 DRC Setup 45 Dual Mono Setup 46 HDMI Setup

ENGLISH

English 5

HW-D600_D650S_XAA_0616.indd 5HW-D600_D650S_XAA_0616.indd 5 2011-06-16  10:27:062011-06-16  10:27:06

Contents

OPERATION

MISCELLANEOUS

47 Using the Surround Modes 47 Using the AUDIO EFFECT Button On the Front of the

Main Unit 48 Using the S.DIRECT Button 49 Using the SUBWOOFER button 49 Listening to the Radio 50 To Listen in Mono/Stereo 50 Presetting Radio Stations 51 Using an iPod 51 Listening to Music (iPod audio function) 51 Watching a Movie (iPod video function) 52 Convenient Functions 52 Sleep Timer Function 53 Mute Function 53 Adjust the Display 53 Reset Function 54 Using Headphones 54 Software Upgrade

55 Operating your TV with the Remote Control 56 Operating your DVD or BD Player with the Remote

Control

OTHER INFORMATION

57 Troubleshooting 58 Product Protection Function 58 Auto Calibration Error List 59 Speciﬁ cations

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product

• appearance.

6 English

HW-D600_D650S_XAA_0616.indd 6HW-D600_D650S_XAA_0616.indd 6 2011-06-16  10:27:072011-06-16  10:27:07

01 Getting Started

Getting Started

Key features of your new AV Receiver

Product Features

Digital AV Receiver

This product is a pure digital AV receiver that performs digital signal processing to minimize signal distortion and loss.

Dolby Digital

Effective audio encoding/decoding technology that provides a vivid surround sound in up to 5.1 channels.

Dolby Pro Logic llx

Dolby Pro Logic IIx is a new technology that provides discrete 7.1 channels out of 2 channel or multi channel sources.It also provides Music,Movie and Game modes. Dolby Pro Logic IIx is an improved surround system that is optimized to a 7.1 CH multimedia system, enabling you to maximize your entertainment experience.

Dolby Pro Logic llz

Dolby Pro Logic IIz adds front height channels to surround sound, creating a 7.1 playback system for video games, home music, and movies; bringing enhanced spatial effects and enveloping sound.

Dolby Digital EX

Adds a surround back channel for more spacious sound compared to regular 5.1 channel Dolby Digital.

Dolby Digital Plus

Dolby Digital Plus is the next-generation audio technology for all high-definition programming and media.

Dolby True-HD

Dolby True-HD is Dolby’s next-generation lossless technology developed for high-definition disc-based media.

DTS 96/24

DTS 96/24 encodes standard 16 bit/44.1 kHz sound to 24 bit/96kHz and applies it to a

5.1 CH sound track.

DTS (Digital Theater Systems)

DTS provides a discrete 5.1 CH digital audio signal for both music and movie contents and uses less compression than Dolby Digital for richer sound.

DTS-HD (Master Audio, High Resolution) (Digital Theater Systems - High Definition)

DTS-HD Audio provides the highest quality multi-channel sound possible. It delivers sound quality that matches the clear and vivid images of high-definition video.

DTS

Provides a full range of 6 channels by converting a digital PCM or analog stereo signal using DTS digital matrix decoding.

English 7

HW-D600_D650S_XAA_0616.indd 7HW-D600_D650S_XAA_0616.indd 7 2011-06-16  10:27:072011-06-16  10:27:07

Getting Started

INPUT SELECT TV SOURCE

POWER

TONE

SETUP/MENU

MO/ST TUNER MEMORY

MUTE

S.DIRECT

VOL

TUNING

/CH

RETURN

EXIT

INFO

SUB WOOFER

CROSS OVER

TUNER

3D SOUND

iPod

AV SYNC

ASC

SAT GAME/TVBD/DVD CD

AUX

SLEEPNEO:6 DIMMER

DSP

PROLOGIC AUDIO ASSIGN

123

456

7809

AMP TV BD DVD

DTS-ES (Extended Surround)

The DTS-ES (Extended Surround) system is a new multi digital signal format that was developed by Digital Theater Systems Inc. Supporting full compatibility with the conventional DTS digital surround sound format, the DTS-ES (Extended Surround) system improves the surround signal for a 360-degree surround effect. DTS-ES adds an additional rear center surround channel for 6.1 channel sound.

iPod

You can enjoy music files by connecting your iPod/iPhone to the AV Receiver with the supplied iPod dock.

SFE (Sound Field Effect) Using 32bit Audio Digital Signal Processing

Provides more realistic surround sound with normal stereo audio sources.

Anynet+ (HDMI-CEC) Function

Anynet+ is a function that can be used to operate this AV Receiver with a Samsung TV remote control, by connecting the receiver to a SAMSUNG TV using an HDMI Cable. (This function is available only in connection with Samsung TV and DVD player supporting Anynet+(HDMI-CEC).)

Accessories

Check the box for the supplied accessories listed below.

Remote Control (AH59-02370A)/

Batteries (AAA size) (4301-000116)

FM antenna (AH42-00017A) User’s manual (AH68-02354X)

(For Speaker cable)

iPod Dock (AH96-00051A) ASC microphone (AH30-00099A)

8 English

HW-D600_D650S_XAA_0616.indd 8HW-D600_D650S_XAA_0616.indd 8 2011-06-16  10:27:072011-06-16  10:27:07

Toroidal Ferrite Core (3301-000144)

Front Panel

01 Getting Started

Description

DISPLAY

VOLUME CONTROL

POWER BUTTON ( )

PHONES JACK

AUX IN JACKS

ASC MIC JACK

INPUT SELECT BUTTON

AUDIO ASSIGN BUTTON

1 2

7 8 9 10 11 12 13 14 15 16 17 18 19 20654

Displays the speaker/audio input status, listening mode, etc.

Adjusts the volume level.

Turns the receiver on/off.

Used to connect a set of headphones.

Auxiliary AV input terminals used to connect a camcorder, portable DVD player or gaming device.

Used to connect the ASC MIC for setting up Auto calibration.

Used to select a source.

FM  TV  BD/DVD  SAT  GAME  AUX  CD  IPOD AUDIO  IPOD VIDEO

Toggles to select an input mode for the selected source.

SOUND EFFECT BUTTON

SETUP BUTTON

UP(,), DOWN(.), LEFT(<), RIGHT(>)

BUTTONS

ENTER BUTTON

HW-D600_D650S_XAA_0616.indd 9HW-D600_D650S_XAA_0616.indd 9 2011-06-16  10:27:082011-06-16  10:27:08

Toggles to select a surround sound mode.

Displays the SETUP menu.

Used to move the cursor up, down, left or right. Also used to select detailed options in the SOUND EFFECT mode and to change the tone level.

Used to select an item in the SETUP menu.

English 9

Getting Started

RETURN BUTTON

ASC BUTTON

S.DIRECT / STEREO

BUTTON

3D SOUND BUTTON

TONE CONTROL BUTTON

TUNING MODE BUTTON

SELECT BUTTON

MEMORY BUTTON

Display

Return to the previous menu.

Used to select the auto calibration mode.

Used to select the S.DIRECT or STEREO mode.

(Output the original signal as it is without applying the sound ﬁ eld effect or any other sound effect.)

Press to apply 3D Sound effect.

Used to set the bass, treble level and tone to on/off.

Used to select the Manual or Preset mode for FM radio.

Used to change the radio frequency.

Used to set a preset radio frequency.

1 2 3 4

SPEAKER INDICATORS

LISTENING MODE INDICATORS

TUNING INDICATORS

AUDIO INPUT INDICATORS

SPEAKER LEVEL INDICATOR

RADIO FREQUENCY INDICATORS

MESSAGE DISPLAY

Displays sound producing speakers.

Displays the current listening mode and audio source.

Displays the status of the current radio broadcast.

Displays the audio input signal type of the currently connected external audio source.

Displays the speaker level.

Displays the current radio frequency range.

Informs you of the status of the receiver.

10 English

HW-D600_D650S_XAA_0616.indd 10HW-D600_D650S_XAA_0616.indd 10 2011-06-16  10:27:092011-06-16  10:27:09

Rear Panel

ONLY FOR SERVICE

ONLY FOR UPDATE

SURROUND BACK OUT

SUBWOOFER

OUT

01 Getting Started

421

6 8 1312

VIDEO IN JACKS

USB PORT

HDMI OUT JACK

HDMI IN JACKS

VIDEO OUT JACK

FM ANTENNA JACK

iPod JACK

ONLY FOR SERVICE JACK

AUDIO IN JACKS

OPTICAL IN JACKS (DIGITAL AUDIO IN)

COAXIAL IN JACK (DIGITAL AUDIO IN)

SURROUND BACK OUT JACKS

SUBWOOFER AUDIO OUT JACK

SPEAKERS OUT TERMINALS

10 1197 14

Receives the video signal from a video player (

BD/DVD, SAT, TV

Can be only used for ﬁ rmware upgrades.

Outputs digital video and audio signals simultaneously using an HDMI cable.

Receives digital video and audio signals simultaneously using an HDMI cable.

Outputs the video signal to a monitors (TV, Projector etc).

Connect the FM antenna.

Receives the audio/video signal from an iPod.

Used for the service repair.

Receives the audio signal from a video player (BD/DVD, SAT, TV).

Receives the digital optical audio signal.

Receives the digital coaxial audio signal.

Outputs the "Surround Back" analog signal to the external ampliﬁ er.

Connect the subwoofers. (Active subwoofer only)

Speaker connection terminals.

HW-D600_D650S_XAA_0616.indd 11HW-D600_D650S_XAA_0616.indd 11 2011-06-16  10:27:092011-06-16  10:27:09

English 11

Getting Started

INPUT SELECT

TV SOURCE

POWER

TONE

SETUP/MENU

MO/ST TUNER MEMORY

MUTE

S.DIRECT

VOL

TUNING

/CH

RETURN

EXIT

INFO

TUNER

3D SOUND

iPod

AV SYNC

ASC

SAT GAME/TVBD/DVD CD

AUX

SLEEP DIMMER

DSP

NEO:6

AUDIO ASSIGNPROLOGIC

123

456

7809

TVAMP BD DVD

SUB

WOOFER

CROSS

OVER

Tour of the Remote Control

Remote Control

26 27

12 English

HW-D600_D650S_XAA_0616.indd 12HW-D600_D650S_XAA_0616.indd 12 2011-06-16  10:27:102011-06-16  10:27:10

01 Getting Started

POWER BUTTON

TV BUTTON

AMP BUTTON

NUMBER BUTTONS

NEO : 6 BUTTON

PROLOGIC BUTTON

SKIP BUTTONS

STOP/PLAY BUTTON

MUTE BUTTON

VOLUME CONTROL BUTTONS

MO/ST BUTTON

TONE BUTTON

SETUP/MENU BUTTON

UP/DOWN/LEFT/RIGHT BUTTONS

RETURN BUTTON

FUNCTION SELECTOR BUTTONS

Turns the receiver on/off.

To change to TV mode, press the TV button.

To change to AMP mode, press the AMP button.

Used to select a TV channel.

Select the desired NEO:6 mode.

Select the desired Dolby Pro Logic audio mode.

Press to skip backwards or forwards on a connected DVD/BD player or iPod.

Press to stop/start playback on a connected DVD/BD player or iPod.

Mutes the sound of a connected device.

Adjusts the volume of the selected device.

Select MONO or STEREO for radio broadcasts.

You can adjust the bass and treble level.

Displays the SETUP menu.

Used to navigate the menus.

Used to return to the previous menu from the SETUP menu.

Used to select an input source.

AV SYNC BUTTON

ASC BUTTON

SUBWOOFER BUTTON

INPUT SELECT,

TV SOURCE BUTTON

BD BUTTON

DVD BUTTON

SLEEP BUTTON

DIMMER BUTTON

DSP BUTTON

AUDIO ASSIGN BUTTON

HW-D600_D650S_XAA_0616.indd 13HW-D600_D650S_XAA_0616.indd 13 2011-06-16  10:27:112011-06-16  10:27:11

Used to select the Audio Delay Mode.

Used to set the Auto Sound Calibration function.

Used to select the Subwoofer.

Toggles to ﬁ nd and select an input source. Press to select a connected TV's video source.

To change to BD mode, press the BD button.

To change to DVD mode, press the DVD button.

Used to set the Sleep Timer.

Adjusts the brightness of the display.

Used to select the SFE mode.

Toggles to select an input mode for the selected source.

English 13

Getting Started

SEARCH BUTTON

PAUSE BUTTON

TUNING/CHANNEL BUTTONS

S.DIRECT BUTTON

TUNER MEMORY BUTTON

INFO BUTTON

ENTER BUTTON

EXIT BUTTON

3D SOUND BUTTON

CROSS OVER BUTTON

Press to search backwards or forwards.

Pauses playback on a connected device.

Used to change the radio broadcasting frequency or TV channel.

Press to select S.DIRECT mode.

Used to set a preset radio frequency.

Display information on the connected device currently being used.

Used to select an item in the SETUP menu.

Exits the SETUP menu.

Press to apply 3D Sound effect.

Press to adjust the crossover frequency.

Installing batteries in the Remote Control

NOTE

✎

Follow these precautions to avoid leaking or cracking cells:

Place batteries in the remote control so they



match the polarity : (+) to (+) and (–) to (–).



Assuming typical AVR usage, the batteries last for about one year.



Use the correct type of batteries. Batteries that look similar may differ in voltage.



Always replace both batteries at the same time.



Do not expose the batteries to heat or a ﬂ ame.

* Battery size: AAA

Operation Range of the Remote Control

The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also be operated at a horizontal angle of up to 30° from the remote control sensor.

14 English

HW-D600_D650S_XAA_0616.indd 14HW-D600_D650S_XAA_0616.indd 14 2011-06-16  10:27:112011-06-16  10:27:11

02 Connections

SL SR

6.6~9.8 feet (2~3m)

Connections

This section involves various methods of connecting the AV receiver to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

Speaker Positioning

* Speakers are provided with model HW-D650S only. Model HW-D600 does not come with

speakers.

AV RECEIVER

Position of AV Receiver

Place the AV Receiver on a dedicated stand or rack.

Subwoofer

The position of the subwoofer is not so critical. Place it anywhere you like.

Front Speakers

Place these speakers in front of your listening position, facing inwards (about 45°) toward you. Place the speakers so that their tweeters will be at the same height as your ears. Align the front face of the front speakers with the front face of the center speaker or place them slightly in front of the center speaker.

Center Speaker

It is best to install it at the same height as the front speakers. You can also install it directly over or under the TV.

Surround Speakers

Place these speakers behind your listening position. If there isn't enough room, place these speakers so they face each other. Place them about 2 to 3 feet (60 to 90cm) above your ears, facing slightly downward. Unlike the front and center speakers, the surround speakers are used to handle mainly sound effects and sound will not come from them all the time.

HW-D600_D650S_XAA_0616.indd 15HW-D600_D650S_XAA_0616.indd 15 2011-06-16  10:27:122011-06-16  10:27:12

English 15

Connections

SBL

SBR

FHL

FHR

SBL

FHL

SBR

FHR

Surround Back Speakers

If you are using two rear center speakers, place them behind the listening position. Place the surround back speaker about 2.3-3.3 feet (70 cm to 1 m).

Front Height Speakers

When using Dolby Pro Logic IIz, place the Surround Back Speakers on the FHL, FHR position above the front L and front R speakers at least 3.3 feet(1 m) above each one.

NOTE

✎



When you attach the speakers to the wall, make sure to fasten them tightly so they do not fall off.

(Option)

Speaker Conﬁ guration

For the best surround-sound experience, you should connect ﬁ ve speakers and a subwoofer. The following table shows which channels you should use based on the number of speakers you have.

7 speakers

(DPL IIz)

(Option)

2 speakers 3 speakers 4 speakers 5 speakers

7 speakers

(DPL IIx)

(Option)

NOTE

✎

If you place a speaker near your TV set, screen color may be distorted because of the magnetic ﬁ eld



generated by the speaker. If this occurs, place the speaker away from your TV set. If you have a external stereo Ampliﬁ er and two Speakers and connect them, you can constitute 7



speaker conﬁ guration. Also if you have a external active subwoofer, you can connect it.



16 English

HW-D600_D650S_XAA_0616.indd 16HW-D600_D650S_XAA_0616.indd 16 2011-06-16  10:27:132011-06-16  10:27:13

Connecting the Speakers

ONLY FOR

SERVICE

ONLY FOR UPDATE

SURROUND BACK OUT

SUBWOOFER

OUT

BACK O

SUBWOOFER

OUT

Connecting Speaker Wire

Loosen the knob by turning counterclockwise.

Insert the bare part of the wire into the hole in the side of each

terminal. Tighten the knob by turning clockwise to secure the wire.

02 Connections

ACTIVE SUBWOOFER

(not supplied)

SURROUND (R)FRONT (R)

SURROUND

SUBWOOFER

CENTER

SURROUND (L)

FRONT (L)

Model HW-D600 AV Receiver HW-D600

Model HW-D650S AV Receiver HW-D600 FRONT SPEAKER PS-FC560S CENTER SPEAKER PS-CC560S SURROUND SPEAKER PS-RC560S SUBWOOFER SPEAKER PS-WC560S

HW-D600_D650S_XAA_0616.indd 17HW-D600_D650S_XAA_0616.indd 17 2011-06-16  10:27:162011-06-16  10:27:16

English 17

Connections

OUT

NOTE

✎



Speakers are provided with model HW-D650S only. Model HW-D600 does not come with speakers. Contact a Samsung Electronics retailer for purchasing.



Keep the subwoofer speaker out of reach of children to prevent them from inserting their hands or objects into the duct (hole).



Never touch speaker terminals while the power is on. Doing so could result in electric shock.



Make sure the polarities (+ and -) are correct.



If you want to use a active subwoofer speaker (not supplied), connect a subwoofer speaker into the SUBWOOFER OUT terminal in the rear panel.



By using an external ampliﬁ er, you can connect the surround back speakers (SBL/SBR) or front height speakers(FHL/FHR) to improve your system up to a 7.1 channel system.

Attaching the Toroidal Ferrite Core to the Speaker Cable

Open the toroidal ferrite cores by pulling the lock lever.

Arrange all the speaker cables that are connected to the unit and make a loop.

Attach the ferrite core as close as possible to the unit.

•

Place the toroidal ferrite core on the looped speaker cable as shown, and then press it closed it

until you hear a click.

SURROUND

URROUND BACK OUT

BACK OUT

SUBWOOFER

UBWOOFER

OUT

18 English

HW-D600_D650S_XAA_0616.indd 18HW-D600_D650S_XAA_0616.indd 18 2011-06-16  10:27:202011-06-16  10:27:20

Connecting External Devices/your TV via HDMI

ONLY FOR SERVICE

ONLY FOR UPDATE

SURROUND BACK OUT

SUBWOOFER

OUT

OPTICAL OUT

HDMI is a digital standard interface for connection to such devices as a TV, projector, DVD player, Blu-ray player, set-top box and more. HDMI removes any loss of signal from analog conversion, enabling you to enjoy video and audio sound quality as it was originally created in the digital source. By connecting through the HDMI(High-Deﬁ nition Multimedia Interface) interface, you can play back digital video and audio.

Game console

DVD or

Blu-ray Player

SAT

(Cable/Satellite/Set-top box)

or HDTV Tuner

Camcorder

(HDTV Terrestrial Receiver)

SURROUND BACK OUT

UBWOOFE

02 Connections

• Connect it if you want to use Anynet+. (If connected TV support ARC, it is not necessary to connect the OPTICAL OUT.)

High-bandwidth Digital Content Protection System (HDCP) support

To play digital contents through the HDMI connection, both the connected external device and TV must support High-bandwidth Digital Content Protection System (HDCP). This product supports HDCP.

Compatibility with a TV Supporting HDMI

A TV with an HDMI jack. Video/Audio

A TV with a DVI-D jack (TV supporting HDCP) Video

A TV with a DVI-D jack (TV not supporting HDCP) -

NOTE

✎

Audio from SACD discs will not be heard with this connection. To play a DVD disc whose copyright is



protected by CPPM, use a player supporting CPPM. The quality of the audio output through the HDMI jack (sampling frequency and bit rate) may be limited by the



performance of the connected device. Since HDMI connection supports both video and audio, you don’t have to connect an additional audio cable.



HW-D600_D650S_XAA_0616.indd 19HW-D600_D650S_XAA_0616.indd 19 2011-06-16  10:27:232011-06-16  10:27:23

English 19

+ 43 hidden pages