Samsung HT-E450, HT-E455 User Manual

Digital Home

HT-E450 HT-E453 HT-E455

Entertainment System

user manual

Imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

English 3

Safety Information

Safety Warnings

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury.

CAUTION :

SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

WARNING

• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION

• Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

• The Mains plug is used as a disconnect device and shall stay readily operable at any time.

• This apparatus shall always be connected to an AC outlet with a protective grounding connection.

• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

TO PREVENT ELECTRIC

CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LÁSER CLASE 1

CLASS 1 LASER PRODUCT

This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

This symbol indicates important instructions accompanying the product.

CAUTION

• INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.

2 English

FUNCTION

MUTE

TOOLS

RETURN

EXIT

INFO

MO/ST

S.VOL

USB REC

S/W LEVEL

123

5 6

809

RECEIVER

SLEEP

DSP/EQ

DVD TV

TUNER MEMORY

AUDIO

UPSCALE

DIMMER

A B C D

P.BASS

VOL

TUNING

/ CH

SOURCE

HOME

TITLE MENU

DISC MENU

REPEAT

GIGA

Precautions

• Ensure that the AC power supply in your house complies with the identification sticker located on the back of your product.

• Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (7.5~10cm).

• Do not place the product on amplifiers or other equipment which may become hot.

Make sure the ventilation slots are not covered.

• Do not stack anything on top of the product.

• Before moving the product, ensure the Disc Insert Hole is empty.

• In order to disconnect the product completely from the power supply, remove the AC plug from the wall outlet, especially when left

unused for a long period of time.

• During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage the product.

• Do not expose the product to direct sunlight or other heat sources. This could lead to overheating and malfunction of the product.

• Protect the product from moisture, and excess heat or equipment creating strong magnetic or electric fields (i.e. speakers.).

• Disconnect the power cable from the AC supply if the product malfunctions.

• Your product is not intended for industrial use. Use of this product is for personal use only.

• Condensation may occur if your product or disc has been stored in cold temperatures. If transporting the product during

the winter, wait approximately 2 hours until the product has reached room temperature before using.

• The batteries used with this product contain chemicals that are harmful to the environment. Do not dispose of batteries in the general household trash.

Accessories

Check for the supplied accessories below.

Video Cable FM Antenna

User manual

Remote Control/Batteries (AAA

size)

English 3

English 5

Safety Information

Cautions on Handling and Storing Discs

Small scratches on the disc may reduce sound and picture quality or cause skipping.

Be especially careful not to scratch discs when handling them.

Holding discs

• Do not touch the playback side of the disc.

• Hold the disc by the edges so that

fingerprints will not get on the surface.

• Do not stick paper or tape on the disc.

Disc Storage

• Do not keep in direct sunlight

• Keep in a cool ventilated area

• Keep in a clean Protection jacket.

Store vertically.

✎ NOTE

` Do not allow the discs to become contaminated with dirt. ` Do not load cracked or scratched discs.

Handling and Storing Discs

If you get fingerprints or dirt on the disc, clean it with a mild detergent diluted in water and wipe with a soft cloth.

• When cleaning, wipe gently from the inside to the outside of the disc

✎ NOTE

` Condensation may form if warm air comes into contact

with cold parts inside the product. When condensation forms inside the product, it may not operate correctly. If this occurs, remove the disc and let the product stand for 1 or 2 hours with the power on.

Licence

• Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS Digital Surround and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

• ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,LLC,a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.

• ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.

• DivX Certified® to play DivX® video, including premium content.

• DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

• Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274.

• HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United

States and other countries.

• This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.

• This product uses some software programs which are distributed under the Independent JPEG Group.

• This product uses some software programs which are distributed under the OpenSSL Project.

• Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.

4 English

Copy Protection

• Many DVD discs are encoded with copy protection. Because of this, you should only connect your product directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs.

Contents

SAFETY INFORMATION

GETTING STARTED

CONNECTIONS

SETUP

2 Safety Warnings 3 Precautions 3 Accessories 4 Cautions on Handling and Storing Discs 4 Licence 4 Copyright 4 Copy Protection

7 Icons that will be used in manual 7 Disc Types and Characteristics 11 Description 11 Front Panel 12 Rear Panel 13 Remote control

15 Connecting the Speakers 18 Connecting the Video Out to your TV 20 Connecting the FM Antenna 20

Connecting Audio from External Components

22 Before Starting (Initial Settings) 22 Setting the Setup menu 23 Display 23 TV Aspect 23 BD Wise 23 Resolution 23 HDMI Format 23 Video Out Signal 24 Audio 24 Speaker Setting 25 DRC (Dynamic Range Compression) 25 AUDIO SYNC 26 Speaker Selection 26 User EQ 26 Audio Return Ch. 26 System 26 Initial Settings 26 DivX(R) Registration 26 DivX(R) Deactivation 27 Language 27 Security 27 Parental Rating 27 Change Password 27 Support 27 Product Information

ENGLISH

English 5

English 7

Contents

BASIC FUNCTIONS

ADVANCED FUNCTIONS

28 Disc Playback 28 Audio CD(CD-DA)/MP3/WMA Playback 29 JPEG File Playback 29 Using the Playback Function 33 Sound Mode 35 Listening to Radio

36 USB Function 36 USB Recording

OTHER INFORMATION

37 Troubleshooting 38 Language code list 39 Specifications 41 OpenSSL License

• Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

• An administration fee may be charged if either a. an engineer is called out at your request and there is no defect in the product

(i.e. where you have failed to read this user manual)

b. you bring the unit to a repair centre and there is no defect in the product

(i.e. where you have failed to read this user manual).

• The amount of such administration charge will be advised to you before any work or home visit is carried out.

6 English

Getting Started

01 Getting Started

Icons that will be used in manual

Make sure to check the following terms before reading the user manual.

Icon Term Definition

This involves a function available with DVD-Video or

✎

DVD

MP3

JPEG

DivX

CAUTION

NOTE

DVD±R/±RW discs that have been recorded and finalised in Video Mode.

This involves a function available with a data CD (CD DA, CD-R/-RW).

This involves a function available with CD-R/-RW discs.

This involves a function available with MPEG4 discs. (DVD±R/±RW, CD-R/-RW)

This involves a case where a function does not operate or settings may be cancelled.

This involves tips or instructions on the page that help each function operate.

Disc Types and Characteristics

Region Code

The product and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play.

Disc Type

DVD-VIDEO

Region

Code

Area

The U.S., U.S. territories and Canada

Europe, Japan, the Middle East, Egypt, South Africa, Greenland

Taiwan, Korea, the Philippines, Indonesia, Hong Kong

Mexico, South America, Central America, Australia, New Zealand, Pacific Islands, Caribbean

Russia, Eastern Europe, India, most of Africa, North Korea, Mongolia

China

Shortcut

Key

This function provides direct and easy access pressing the button on the remote control.

English 7

Getting Started

English 9

Disc types that can be played

Disc Types &

Mark (Logo)

DVD-VIDEO

AUDIO-CD

DivX

Recorded

Signals

AUDIO

VIDEO

AUDIO

VIDEO

Disc

Max. Playing Time

Size

Approx. 240 min.

12 cm

8 cm

12 cm

8 cm 20 min.

12 cm

8 cm

(single-sided)

Approx. 480 min.

(double-sided)

Approx. 80 min.

(single-sided)

Approx. 160 min.

(double-sided)

74 min.

CD-R MP3 Discs

• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.

• MP3 file names should contain no blank spaces or special characters (. / = +).

• Use discs recorded with a compression/ decompression data rate greater than 128Kbps.

• Only files with the ".mp3" and ".MP3" extensions can be played.

• Only a consecutively written multisession disc can be played. If there is a blank segment in the Multisession disc, the disc can be played only up to the blank segment.

• If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.

• For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate (e.g., 32Kbps ~ 320Kbps), the sound may skip during playback.

• A maximum of 500 tracks can be played per CD.

• A maximum of 300 folders can be played per CD.

Do not use the following type of discs!

CD-R JPEG Discs

• LD, CD-G, CD-I, CD-ROM, DVD-ROM and DVD-RAM discs cannot be played on this product. If such discs are played, a <WRONG DISC FORMAT> message appears on the TV screen.

• DVD discs purchased abroad may not play on this product. If such discs are played, a <Wrong Region. Please check Disc.> message appears on the TV screen.

Disc Types And Disc Format

This product does not support Secure (DRM) Media files.

CD-R Discs

• Some CD-R discs may not be playable depending on the disc recording device (CD-Recorder or PC) and the condition of the disc.

• Use a 650MB/74 minute CD-R disc. Do not use CD-R discs over 700MB/80 minutes as they may not be played back.

• Some CD-RW (Rewritable) media, may not be playable.

• Only CD-Rs that are properly "closed" can be fully

played. If the session is closed but the disc is left open, you may not be able to fully play the disc.

• Only files with the "jpg" extensions can be played.

• If the disc is not closed, it will take longer to start

playing and not all of the recorded files may be played.

• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.

• JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).

• Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc, the disc can be played only up to the blank segment.

• A maximum of 999 images can be stored on a folder.

• When playing a Kodak/Fuji Picture CD, only the JPEG

files in the picture folder can be played.

• Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.

8 English

DVD±R/±RW, CD-R/RW Discs

• Software updates for incompatible formats are not supported. (Example : QPEL, GMC, resolutions higher than 800 x 600 pixels, etc.)

• If a DVD-R/-RW disc has not been recorded properly in DVD Video format, it will not be playable.

Supported Formats (DivX)

This product only supports the following media formats. If both video and audio formats are not supported, the user may experience problems such as broken images or no sound.

Supported Video Formats

01 Getting Started

Format Supported Versions

AVI

WMV

Format Bit Rate

MP3

WMA

AC3 DTS

• DivX files, including audio and video files, created in the DTS format can only support up to 6Mbps.

• Aspect Ratio : this product supports up to 720x576 pixels. TV screen resolutions higher than 800 will not be supported.

• When you play a disc whose sampling frequency is higher than 48khz or 320kbps, you may experience shaking on the screen during playback.

• Sections with a high frame rate might not be played while playing a DivX file.

• Since this product only provides encoding formats authorized by DivX Networks, Inc., a DivX file created by the user might not play.

DivX3.11~DivX6.8 V1/V2/V3/V7

Supported Audio Formats

Sampling

Frequency

80~320kbps

44.1khz

56~128kbps 128~384kbps 44.1/48khz

1.5Mbps 44.1khz

English 9

Getting Started

English 11

Notes on USB connection

Supported devices: USB storage media, MP3 player, digital camera

1) If a folder or file name is longer than 10 characters, it may not properly display or operate.

2) A subtitle file bigger than 300KB may not be properly displayed.

3) A certain USB/digital camera device, USB card reader is not supported.

4) FAT16 and FAT32 file systems are supported.

5) Photo (JPEG), music (MP3, WMA) and video file should have their names in Korean or English. Otherwise, the file may not played.

6) Connect directly to the product's USB port. Connecting through another cable may raise problems with USB compatibility.

7) Inserting more than one memory device to a multi-card reader may not operate properly.

8) PTP protocol for digital camera is not supported.

9) Do not disconnect USB device during a "Reading" process.

10) Bigger the image resolution, the longer the delay to displaying.

11) DRM applied MP3/WMA or video files downloaded from a commercial site are not played back.

12) External HDD device is not supported.

14) Supported file formats

Format

File name

File

extension

Bit rate

Version

Pixel

Sampling

Frequency

Still

Picture

JPG MP3 WMA WMV DivX

JPG

.JPEG

640x480

.MP3 .WMA .WMV .AVI

80~320

–

kbps

– –

–

44.1kHz 44.1kHz

Music Movie

56~128

kbps

4Mbps 4Mbps

V1,V2,

V3,V7

DivX3.11~

720x576

44.1KHz~ 48KHz

DivX6.8

13) The maximum current supported by the USB port for an external device is 500 mA (at 5V DC).

10 English

Front Panel

Description

01 Getting Started

DISC TRAY

AUX IN 1 CONNECTOR

DISPLAY

USB PORT

1 2 4

AUX IN 1

Insert disc here.

Connect external components such as an MP3 player.

Displays the playing status, time, etc.

Connect here and play files from external USB storage devices such as MP3 players, USB flash memory, etc. The USB memory that requires high power (more than 500mA at 5V) may not be supported. (except iPod/iPhone which is compatible with 1A at 5V).

5V 500mA

95 6 87

OPEN/CLOSE BUTTON (

5 6

FUNCTION BUTTON (

STOP BUTTON (

PLAY / PAUSE BUTTON (

VOLUME CONTROL BUTTON ( , )

POWER BUTTON ( )

REMOTE CONTROL SENSOR

)

Opens and closes the disc tray.

The mode switches as follows : DVD/CD ➞ D.IN ➞ AUX 1 ➞AUX 2 ➞ USB ➞ FM

Stops disc playback.

Plays a disc or pauses playback.

Volume adjustment.

Turns the product on and off.

Detects signals from the remote control.

English 11

Getting Started

English 13

Rear Panel

1 2 3 4 6 875

FA NET

(Only For Service)

FA NET (Only for Service)

COOLING FAN

SPEAKERS OUTPUT CONNECTORS

AUX IN 2 JACKS

VIDEO OUT JACK

EXTERNAL DIGITAL OPTICAL IN JACK

(DIGITAL AUDIO IN)

SPEAKERS OUT

SURROUND SUBWOOFER SURROUND

VIDEO

AUX IN 2

OUT

FM ANT

OPTICAL

DIGITAL AUDIO IN

HDMI OUT

Used for the service repair.

The fan always revolves when the power is on. Ensure a minimum of 10cm of clear space on all sides of the fan when installing the product.

Connect the front, center,surround speakers and subwoofer.

Connect to the 2CH Analog output of an external device (such as a VCR).

Connect your TV's Video Input jack (VIDEO IN) to the VIDEO OUT jack.

Use this to connect external equipment capable of digital output.

FM ANTENNA JACK

HDMI OUT JACK

12 English

Connect the FM antenna.

Using an HDMI cable, connect this HDMI output jack to the HDMI input jack on your TV for the best quality picture.

FUNC TIO N

MU TE

TOOLS

RETURN

EXIT

INFO

MO /S T

S.VOL

USB REC

S/W LEVEL

5 6

RE CEI VE R

SL EEP

DS P/E Q

DVD TV

TUNER

ME MOR Y

AUDIO

UP SCA LE

DIMMER

A B C D

P.BASS

VOL

TU NI NG

/ CH

SOURC E

HOM E

TI TLE M EN U

DI SC ME NU

RE PEA T

GIGA

Tour of the Remote Control

Turn the product on and off.

If you want to change to TV mode,

If you want to change to Home Theater, press the DVD button.

Press numeric buttons to operate options.

press the TV button.

01 Getting Started

Remote control

This is mode selection button. or Press to select TV's video mode.

Set a Sleep time to shut off the Product.

To open and close the disc tray.

Select the desired Dolby Pro Logic II audio

mode.

Press to skip backwards or forwards.

Press to stop/play a disc.

Cut off the sound temporarily.

Adjust the volume.

Brings up the product's setup menu.

Press to check the disc menu.

Used to change the audio/subtitle

language, angle etc.

Select on-screen menu items and

Return to the previous menu.

Allow access to common functions

of the

Adjust the brightness of Display.

Used to turn on/off GIGA Sound function.

Used to adjust the level of the

change menu value.

DVD Home Theater

such as

navigating the Photo List.

subwoofer.

Press to preset FM stations.

Select the desired DSP/EQ audio mode.

Press to search backwards or forwards.

Press to pause a disc.

Search for active FM stations and change channels.

Allows you to repeat a title, chapter, track or disc.

Use this to enter the Title menu.

Display current disc(file) status.

Press this to exit the menu.

Select the desired P.BASS or MP3 Enhancement setting.

Regulate and stabilize the volume level against a drastic volume change.

Used to start USB recording.

Select MONO or STEREO for radio broadcasting.

English 13

Getting Started

English 15

Installing batteries in the Remote Control

* Battery size: AAA

✎ NOTE

` Place batteries in the remote control so they match

the polarity : (+) to (+) and (–) to (–).

` Always replace both batteries at the same time. ` Do not expose the batteries to heat or flame. ` The remote control can be used up to approximately

23 feet (7 meters) in a straight line.

Setting the Remote Control

You can control certain functions of your TV with this remote control.

When operating a TV with the remote control

1. Press the TV button to set the remote control to

TV mode.

2. Press the POWER button to turn on the TV.

3. While holding down the POWER button, enter

the code corresponding to your brand of TV.

• If there is more than one code listed for your TV in the table, enter one at a time to determine which code works.

• Example : For a Samsung TV

While holding down the POWER button, use the number buttons to enter 00, 15, 16, 17 and 40.

4. If the TV turns off, the setting is complete.

• You can use the TV POWER, VOLUME, CHANNEL, and Numeric buttons (0~9).

✎ NOTE

` The remote control may not work or some operations

may not be possible with some brands of TVs.

` The remote control will work on a Samsung TV by

default.

TV Brand Code List

Brand Code Brand Code

Admiral

(M.Wards)

A Mark

Anam

AOC

Bell & Howell

(M.Wards)

Brocsonic

Candle

Cetronic

Citizen

Cinema Classic

Concerto

Contec

Coronado

Craig

Croslex

Crown

Curtis Mates

CXC

Daewoo

Daytron

Dynasty

Emerson

Fisher Funai

Futuretech

General

Electric (GE)

Hall Mark

Hitachi

Inkel

JC Penny

JVC

KTV KEC KMC

LG (Goldstar)

Luxman

LXI (Sears)

Magnavox

Marantz

Matsui

MGA

Mitsubishi/

MGA

56, 57, 58

01, 15

01, 02, 03, 04, 05, 06,

07, 08, 09, 10, 11,

12, 13, 14

01, 18, 40, 48

57, 58, 81

59, 60

03, 18, 25

97 03 18 46 15

03, 05, 61, 82, 83, 84

62 03

59, 61, 63

02, 03, 04, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32, 34,

35, 36, 48, 59, 90

40 03

03, 15, 40, 46, 59, 61,

64, 82, 83, 84, 85

19, 65

03 03

06, 40, 56, 59, 66,

67, 68

15, 18, 50, 59, 69

56, 59, 67, 86

59, 61, 87, 88

03, 15, 40

01, 15, 16, 17, 37, 38, 39, 40, 41, 42, 43, 44

19, 54, 56, 59, 60, 62,

63, 65, 71

15, 17, 18, 48, 54, 59,

60, 62, 72, 89

40, 54

18, 40

18, 40, 59, 60, 75

MTC

NEC

Nikei

Onking

Onwa

Panasonic

Penney

Philco

Philips

Pioneer

Portland

Proton

Quasar

Radio Shack

RCA/

Proscan Realistic

Sampo

Samsung

Sanyo

Scott

Sears Sharp

Signature

2000

(M.Wards)

Sony

Soundesign

Spectricon

SSS

Sylvania

Symphonic

Tatung

Techwood

Teknika

TMK Toshiba Vidtech

Videch

Wards

Yamaha

York

Yupiteru

Zenith

Zonda

Dongyang

18, 19, 20, 40, 59, 60

06, 07, 08, 09, 54, 66,

03, 15, 17, 18, 48, 54,

15, 17, 18, 40, 48,

17, 48, 56, 60, 61, 75

18, 59, 67, 76, 77, 78,

00, 15, 16, 17, 40, 43, 46,

50, 51, 52, 53, 55

18, 40, 48, 54, 59,

15, 17, 18, 40, 48,

67, 73, 74

59, 62, 69, 90

54, 62, 72

63, 66, 80, 91

15, 18, 59

06, 66, 67

92, 93, 94

03, 19

47, 48, 49,

19, 61, 65

03, 40, 60, 61

15, 18, 19 15, 57, 64

57, 58

03, 40

60, 62

61, 95, 96

06 18

03, 15, 18, 25

18, 40

19, 57, 63, 71

59, 60, 69

54, 60, 64

58, 79

03, 54

14 English

02 Connections

Connections

This section involves various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

Connecting the Speakers

Position of the product

Place it on a stand or cabinet shelf, or under the TV stand.

Selecting the Listening Position

The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV. Example : For 32" TV's 2~2.4m

For 55" TV's 3.5~4m

Place these speakers in front of your listening position, facing inwards (about 45°)

Front Speakers

Center Speaker

Surround Speakershj

Subwoofer

toward you. Place the speakers so that their tweeters will be at the same height as your ear. Align the front face of the front speakers with the front face of the center speaker or place them slightly in front of the center speakers.

It is best to install it at the same height as the front speakers. You can also install it directly over or under the TV.

Place these speakers to the side of your listening position. If there isn't enough room, place these speakers so they face each other. Place them about 60 to 90cm above your ear, facing slightly downward.

Unlike the front and center speakers, the surround speakers are used to

handle mainly sound effects and sound will not come from them all the time.

The position of the subwoofer is not so critical. Place it anywhere you like.

! CAUTION

` Do not let children play with or near the speakers. They could get hurt if the speaker falls. ` When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct. ` Keep the subwoofer out of the reach of children so as to prevent them from inserting their hands or alien

substances into the duct (hole) of the subwoofer.

` Do not hang the subwoofer on the wall through the duct (hole).

✎ NOTE

` If you place a speaker near your TV set, screen colour may be distorted because of the magnetic field

generated by the speaker. If this occurs, place the speaker away from your TV set.

English 15

Connections

English 17

Speaker Components

HT-E450

(L) (R)

FRONT

SURROUND

Speaker Components

HT-E453

(L) (R)

FRONT

SCREW (5×15): 8EA

STAND

HT-E455

(L) (R)

SURROUND

STAND BASE

SUBWOOFER

CENTER

SPEAKER

CABLE

CENTER

Assembled Speakers

HT-E453



FRONT

SPEAKER

HT-E455

SURROUND

SPEAKER

SUBWOOFER

CENTER SPEAKER

SUBWOOFER

FRONT

(L) (R)

SURROUND

STAND

STAND BASE

SPEAKER CABLE

✎ NOTE

` Refer to page 17 to install the Speakers on the Tallboy Stand.

16 English

SCREW (5×15): 16EA

CENTER

SUBWOOFER



FRONT/SURROUND SPEAKER

CENTER SPEAKER

SUBWOOFER

Installing the Speakers on the Tallboy Stand

FM ANT

DIGITAL

AUDIO IN

OPTICAL

SURROUND SUBWOOFER SURROUND

SPEAKERS OUT

HDMI OUT

AUX IN 2

VIDEO OUT

FA NET

(Only For Service)

02 Connections

* HT-E453 only - Front Speakers * HT-E455 only - Front/Surround Speakers

1. Turn the Stand Base upside-down and connect it to the Stand.

2. Insert three screws (5*15, For connecting Stand & Stand Base) clockwise

into the three holes marked using a screwdriver as shown in the illustration.

! CAUTION : When you use a torque screwdriver, be careful not to put

excessive force. Otherwise, it runs idle or can be damaged. (torque screwdriver- below 15 kg.f.cm)

3. Straighten a supplied speaker wire and put in the hole on the centre of

Stand Base.

4. Connect the upper Speaker to the assembled Stand.

5. Insert another large

clockwise into the hole on the rear of the speaker using a

6. This is the appearance after the speaker is installed. Follow this

steps to install other speaker.

Connecting The Speakers

screw (5*15, For connecting Speaker & Stand)

screwdriver.

Stand

Stand Base

Speaker

Stand

1. Press down the terminal tab on the back of the speaker. (HT-E453/E455

Only)

2. Insert the black wire into the black terminal (–) and the red wire into the red

terminal (+), and then release the tab.(HT-E453/E455 Only)

Black

Red

3. Connect the connecting plugs to the back of the product by matching the

colours of the speaker plugs to the speaker jacks.

In case of HT-E450

Center Speaker

Front Speaker (R)

Surround Speaker (R)

Subwoofer

Front Speaker (L)

Surround Speaker (L)

* Refer to page 16 for the speakers of HT-E453/E455.

English 17

Connections

English 19

FM ANT

DIGITAL

AUDIO IN

OPTICAL

HDMI OUT

AUX IN 2

VIDEO OUT

Connecting the Video Out to your TV

Choose one of the two methods for connecting to a TV.

METHOD2 (supplied)

METHOD1

METHOD 1 : HDMI

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.

METHOD 2 : Composite Video

Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN jack on your TV.

✎ NOTE

` Resolutions available for the HDMI output are 576p(480p), 720p,1080i/1080p. See page 23 for the resolution

setting.

` This product operates in Interlace scan mode 576i(480i) for composite output. ` After making the video connection, set the Video input source on your TV to match the corresponding Video

output mode on your product. Turn this product on first before you set the video input source on your TV. See your TV owner's manual for more information on how to select the TV's Video Input source.

! CAUTION

` Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright

protection systems and the picture will be distorted on the television.

18 English

HDMI FUNCTION

HDMI Auto Detection Function

If your TV is Samsung TV and it supports CEC function.The product's video output will automatically change to HDMI mode when connecting an HDMI cable while power is on.

• HDMI (High Definition Multimedia Interface) HDMI is an interface that enables the digital transmission of video and audio data with just a single connector.

Using HDMI, the product transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack.

• HDMI connection description

- HDMI outputs only a pure digital signal to the TV.

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.

• What is the HDCP?

• HDCP (High-band width Digital Content Protection) is a system for protecting DVD content outputted via

HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being made.

02 Connections

Using Anynet+(HDMI-CEC)

Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control. Anynet + can be used by connecting this product to a SAMSUNG TV using a HDMI Cable. This is only available with SAMSUNG TV's that support Anynet+.

1. Connect the product to a Samsung TV with an HDMI cable. (See page 18)

2. Set the Anynet+ function on your TV. (See the TV instruction manual for more information.)

✎ NOTE

` The Anynet+ function supports some buttons of the remote control. ` This function is not available if an HDMI cable does not support CEC. ` Depending on your TV, certain HDMI output resolutions may not work.

Please refer to the user’s manual of your TV.

` Please check the

logo (If your TV has an

logo, then it supports Anynet+ function.)

English 19

Connections

English 21

AUX IN 1

5V 500mA

AUX IN 1

Connecting the FM Antenna

FM Antenna (supplied)

SPEAKERS OUT

SURROUND SUBWOOFER SURROUND

1. Connect the FM antenna supplied to the FM Antenna jack.

2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a

wall or other rigid surface.

AUX IN 2

VIDEO OUT

OPTICAL

DIGITAL

AUDIO IN

FM ANT

HDMI OUT

✎ NOTE

` This product does not receive AM broadcasts.

Connecting Audio from External Components

AUX1 : Connecting an External Component/MP3 player

Components such as an MP3 Player.

1. Connect AUX IN 1 (Audio) on the front of the product to the Audio Out of the external component/ MP3

player.

2. Press the FUNCTION button to select AUX1 input.

• The mode switches as follows :

DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞ USB ➞ FM

20 English

Audio Out

Audio Cable

(not supplied)

Connecting Audio from External Components

FM ANT

DIGITAL AUDIO IN

OPTICAL

SURROUND SUBWOOFER SURROUND

SPEAKERS OUT

HDMI OUT

AUX IN 2

VIDEO OUT

FA NET

(Only For Service)

Audio Cable (not supplied)

If the external analog component has only one Audio Out, connect either left or right.

White

Red

02 Connections

Optical Cable

(not supplied)

VCR

AUX 2

Set-Top Box

OPTICAL

AUX2 : Connecting an External Analog Component

Analog signal components such as a VCR.

1. Connect AUX IN 2 (Audio) on the back of the product to the Audio Out of the external Analog

component.

• Be sure to match the colors of the connecting jacks.

2. Press the FUNCTION button to select AUX 2 input.

• The mode switches as follows :

DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞ USB ➞ FM

✎ NOTE

` You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the

VCR to this product.

OPTICAL : Connecting an External Digital Component

Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).

1. Connect the DIGITAL AUDIO IN (OPTICAL) on the back of the product to the Digital Output of the

external digital component.

2. Press the FUNCTION button to select D.IN.

• The mode switches as follows :

DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞ USB ➞ FM

English 21

Setup

English 23

FUNC TION

MU TE

5 6

REC EIVE R

SL EEP

DS P/E Q

DVD TV

VOL

TU NI NG

/ CH

SOURC E

REP EAT

Before Starting (Initial Settings)

1. Press the POWER button when it is plugged in

TV for the first time. Initial Settings screen will be displayed.

Initial settings > On-Screen Language Select a language for the on-screen displays

English

한국어

Nederlands

Français Deutsch

Italiano

Move " Select

2. Press the ▲▼ buttons to select the desired

language, then press the ENTER button.

3. Press the ▲▼ buttons to select desired TV Aspect,

then press the ENTER button.

` If the HDMI cable is connected to the product, TV

aspect does not appear.

Setting the Setup menu

The access step may differ depending on the selected menu. The GUI (Graphical User Interface) in this manual may differ, depending on the firmware version.

DIS C ME NU

HOM E

TIT LE M ENU

TOOLS

INFO

HOME BUTTON : Display the home menu.

RETURN BUTTON : Return to the previous

setup menu.

ENTER / DIRECTION BUTTON Move the cursor and select an item.

Select the currently selected item. Confirm the setting.

RETURN

EXIT

✎ NOTE

` If you have not selected a preferred language in the

initial settings, you will see a language selection window next time you turn on the product.

` Your language selection will apply to all menus:

On-Screen Menu, Disc Menu, Audio, Subtitle.

` If you want to move to the previous screen, press the

A(PREVIOUS) or RETURN button.

` Once you select a menu language, you can change it by

pressing the STOP (@) button on the remote control or the main set for more than 5 seconds in no disc state.

` When the Initial Settings screen does not appear, refer

to the Initial Settings. (see page 26)

EXIT BUTTON : Exit the setup menu.

Settings

Function DVD/CD

1. Press the POWER button.

2. Press the _+ buttons to select Settings, then

press the ENTER button.

3. Press the ▲▼ buttons to select the desired

menu, then press the ENTER button.

4. Press the ▲▼ buttons to select the desired

sub-menu, then press the ENTER button.

5. Press the ▲▼ buttons to select the desired

item, then press the ENTER button.

6. Press the EXIT button to exit the setup menu.

22 English

03 Setup

Display

You can configure various display options such as the TV Aspect, Resolution, etc.

TV Aspect

Depending on the type of television you have, you may want to adjust the screen setting.

• 4:3 Pan-Scan

Select when you want to see the 16:9 video supplied by the DVD without the black bars on top and bottom, even though you have a TV with a 4:3 ratio screen(extreme left and right portion of the movie picture will be cut off).

• 4:3 Letter Box

Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.

• 16:9 Wide

You can view the full 16:9 picture on your widescreen TV.

• On : The original resolution of the DVD disc will

be output to the TV direct.

• Off : The output resolution will be fixed

according to the Resolution previously set, regardless of the resolution of the disc.

✎ NOTE

` This will optimize the picture quality according

to the content (In the DVD disc, etc) that you want to play and the product or your BD Wise-compliant Samsung TV.

` If you want to change the resolution in BD Wise

mode, you must set BD mode to Off in advance.

` BD Wise will be disabled if the product is

connected to a device that does not support BD Wise.

Resolution

Sets the output resolution of the HDMI video signal. The number in 576p(480p), 720p, 1080i and 1080p indicates the number of lines of video. The i and p indicate interlace and progressive scan, respectively.

• 576p(480p) : Outputs 576(480) lines of progressive video.

• 720p : Outputs 720 lines of progressive video.

• 1080i : Outputs 1080 lines of interlaced video.

• 1080p : Outputs 1080 lines of progressive video.

• BD Wise : Automatically sets the optimal resolution when

connected via HDMI to a TV with the BD Wise feature. (The BD Wise menu item appears only if BD Wise is set to On.)

✎ NOTE

` When using HDMI, the screen is automatically converted to the

16:9 Wide mode and TV Aspect is deactivated.

` If a DVD is in the 4:3 ratio, you cannot view it in the wide screen. ` Since DVD discs are recorded in various image formats, they will

look different depending on the software, the type of TV, and the TV aspect ratio setting.

BD Wise

(Samsung products only)

BD Wise is Samsung's latest inter-connectivity feature. BD-Wise to each other via HDMI, the optimum resolution will be set automatically.

When you connect Samsung products with

✎ NOTE

` If Composite is connected, the resolution

supports only 576i(480i).

` 1080P may not appear depending on TV.

HDMI Format

You can optimize the color setting from the HDMI output. Select a connected device Type.

• Monitor : Select if connected to a Monitor via HDMI.

• TV : Select if connected to a TV via HDMI.

Video Out Signal

Different countries apply different TV standard. You can select from NTSC or PAL.

• NTSC :

• PAL :

You can select the NTSC video format

You can select the PAL video format

English 23

Setup

English 25

Audio

Speaker Setting

Adjusting Front/Surround Bal.

` You can select between 0 and -6. ` The volume decreases as you move closer to –6.

Speaker Size

You can set the Speaker Size of the Center and Surround Speakers, as well as Test Tone in this mode.

Settings

Speaker Setting

Speaker Size ▶

Sound Edit

Delay Time

Test Tone : Off

Move " Select ' Return

Select ' Return

• For the Front, the mode is set to Small.

• For the Subwoofer, the mode is set to Present.

• For the Center and Surround, you can switch the

mode to Small or None.

- Small : Select this when using the speakers.

- None : Select this when no speaker is

connected.

✎ NOTE

` The speaker mode may vary depending on the

Dolby Pro Logic and Stereo settings.

Adjusting Center/Surround/Subwoofer Level

` The volume level can be adjusted in steps from

+6dB to –6dB.

` The sound gets louder as you move closer to +6dB

and quieter as you get closer to -6dB.

Delay Time

If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the Center and Surround speakers. You can also set the Test Tone in this mode.

Setting up the Speaker Delay Time

When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the Center and Surround Speakers.

Settings

Delay Time

Front

Center : 00ms

Surround : 00ms

Subwoofer

Test Tone : Off

Sound Edit

You can adjust the balance and level for each speaker.

Settings

Front Bal.

Surround

Bal.

Center Level Surround Level SW Level

Sound Edit

Change " Select ' Return

Move " Select ' Return

Press the ▲▼ buttons to select and adjust the desired speaker.

Press the _+ buttons to adjust the settings.

24 English

Change " Select ' Return

move " Select ' Return

✎ NOTE

dB dB dB

` The Delay Time menu will be activated only when a

5.1 channel source is played.

` You can not set Center and Surround in this mode

when their Speaker Size is set to NONE.

03 Setup

Ideal Center Speaker placement

Ideal Surround Speaker placement

Place all speakers within this circle.

Df: The distance from Front Speaker Dc: The distance from Center Speaker Ds: The distance from Surround Speaker

Setting the Center Speaker

If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.

Distance between

Df and Dc

Delay

Time

0.00m 0.34m 0.68m 1.06m 1.40m 1.76m

00 ms 01 ms 02 ms 03 ms 04 ms 05 ms

Test Tone

Settings

Use the Test Tone feature to check the speaker connections.

• Press the _+ buttons to select On.

• The test tone will be sent to Front Left ➞ Center

➞ Front Right ➞ Surround Right ➞ Surround Left ➞ Subwoofer in order.

To stop the test tone, press the ENTER button.

Speaker Setting

Speaker Size

Sound Edit

Delay Time

Test Tone : On

Move " Select ' Return

Select ' Return

▶

DRC (Dynamic Range Compression)

This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.

• You can select either Full, 6/8, 4/8, 2/8, off.

Setting the Surround Speaker

If the distance of Dc is equal to or longer than the distance of Ds in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.

Distance between

Ds and Dc

Delay

Time

0.00m 1.06m 2.11m 3.16m 3.62m 5.29m

00 ms 03 ms 06 ms 09 ms 12 ms 15 ms

✎ NOTE

` With PL II (Dolby Pro Logic II), the delay time

may be different for each mode.

` With AC-3 and DTS, the delay time can be set

between 00 and 15mSEC.

` The Center channel is only adjustable on 5.1

channel discs.

AUDIO SYNC

Video and audio sync may not match with digital TV. If this occurs, adjust the audio delay time to match the video

• You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.

English 25

Setup

English 27

Speaker Selection

The audio signals transmitted over the HDMI Cable can be changed Home Theater/TV Speaker.

• Home Theater : Video is transmitted over the

HDMI connection cable only, and audio is output through the product speakers only.

• TV Speaker : Both video and audio signals are

transmitted over the HDMI connection cable, and audio is output through your TV speakers only.

✎ NOTE

` The default setting of this function is Home

Theater .

` HDMI Audio is automatically down-mixed to 2ch

for TV speakers.

✎ NOTE

` When Anynet+ (HDMI-CEC) is Off, the Audio

Return Channel function is not available.

` Using an ARC (Audio Return Channel)-

uncertified HDMI cable may cause a problem in compatibility.

` ARC function is only available if an ARC-

compliant TV is connected.

System

Initial Settings

By using the Initial Settings, you can set the language and TV aspect .

` When TV Selection is set to TV Speaker, PL II /

DSP EQ/P.BASS/GIGA/S.VOL doesn't work.

` With Speaker Selection set to 'TV Speaker', the

volume can be adjusted only using the TV remote control.

User EQ

You can configure the equalizer settings manually to your preference.

Settings

-6

250Hz 600Hz 1kHz 3kHz 6kHz 10kHz 15kHz

User EQ

Reset > Adjust < Move ' Return

Move " Select ' Return

✎ NOTE

` If an HDMI cable is connected to the product,

the TV aspect does not appear and it is set to 16:9 Wide automatically.

DivX(R) Registration

View DivX(R) VOD Registration Code to purchase and play DivX(R) VOD content.

✎ NOTE

` This option is not activated if you select OK.To

activate this option, please activate the DivX(R) Deactivation.

` Even after you reset the system, the settings of

DivX Registration will not be reset.

DivX(R) Deactivation

Select this to get a new registration code.

Audio Return Ch.

You can enjoy TV sound from the Home Cinema speakers by using just one HDMI cable.

• Off : Turn the Audio Return Channel function off.

• Auto : Listen to TV sound from the Home Cinema

speakers if your TV is compatible with the Audio Return Channel function.

26 English

03 Setup

Language

You can select the language you prefer for on-screen menu, disc menu, etc.

OSD

Language

Disc Menu

Audio

Subtitle

Select the language for the on-screen displays.

Select the language for the disc menu displays.

Select the language for disc audio.

Select the language for disc subtitles.

a To select a language that does not appear in the

menu, select OTHERS in the Disc Menu, Audio and Subtitle, and enter the language code of your country (see page 38).

a You cannot select OTHERS in the OSD Language

menu.

✎ NOTE

` The selected language will only appear if it is

supported on the disc.

Change Password

Select Change and enter the 4-digit password to set the parental lock using the number buttons on the remote control.

Settings

Display Audio System Language

Security

Support

If you forgot your password

1. Remove the disc.

2. Press and hold the STOP (@) button on the

remote control for 5 seconds or more. All settings will revert to the factory settings.

Parental Rating : Off

Password : Change

Move " Select ' Return

▶

Security

The Parental Lock function works in conjunction with DVDs that have been assigned a rating, which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc.

Parental Rating

Select the rating level you want to set. A larger number indicates that the program is intended for adult use only. For example, if you select up to Level 6, discs that contain Level 7, 8 will not play.

Enter the password and then press the ENTER button.

- The password is set to "0000" by default.

- Once the setup is complete, you will be taken to the previous screen.

Support

Product Information

Provide the product information such as Model code, Softrware Version, etc.

English 27

Basic Functions

English 29

Disc Playback

1. Press the OPEN/CLOSE (^) button.

2. Place a disc gently into the tray with the disc's

label facing up.

3. Press the OPEN/CLOSE (^) button to close

the disc tray.

✎ NOTE

Resume function: When you stop disc play, the product remembers where you stopped, so when you press PLAY button again, it will pick up where you left off. (This function works only with DVDs.) Press the STOP button twice during playback to disable the Resume function.

If no buttons are pressed on the product or remote control for more than 3 minutes when the product is in Pause mode, it will change to STOP mode.

The initial screen may appear different, depending on the content of the disc.

Pirated discs will not play in this product because they violate the CSS(Content Scrambling System: a copy protection system) recommendations.

will appear when an invalid button is pressed.

Audio CD(CD-DA)/MP3/WMA Playback

Track01 1/17

0:15 / 3:59

Function DVD/CD Repeat Play Mode

1. Insert an Audio CD(CD-DA) or an MP3 Disc into the

disc tray.

• For an Audio CD, the first track will be played automatically.

- Press the [] buttons to move to the

previous/next track.

• For the MP3/WMA disc, press the _+ buttons to select Music, then press the ENTER button.

- Press the ▲▼_+ buttons to select a

desired file and press the ENTER button.

- Press the () buttons to move to the

previous/next pages.

2. Press the STOP (@) button to stop playback.

TV Screen Saver/Power Saving Function

• If no button input is made for more than 5 minutes in Stop or Play (music) mode, the screen saver will get activated.

• If the product is left in the screen saver mode for more than 20 minutes, the power will automatically turn off. (Except during play a music)

28 English

✎ NOTE

` Some MP3/WMA-CDs may not play, depending on

the recording mode.

` Table of contents of a MP3-CD varies depending on

the MP3/WMA track format recorded on the disc.

` WMA-DRM files cannot be played.

04 Basic Functions

JPEG File Playback

Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played back with this product.

1. Insert a JPEG disc on the disc tray.

2. Press the _+ buttons to select Photo, and

then press the ENTER button.

3. Press the ▲▼ buttons to select the folder you

want to play, and then press the ENTER button.

4. Press the ▲▼ buttons to select the photo you

want to play, and then press the

• The selected file will play and slide show will start.

• To stop slide show, press the PAUSE (#) button.

• You can view the previous/next file by pressing the ◀,▶ buttons during the slideshow mode.

ROOT

JPEG 1

JPEG 2 JPEG 3

ENTER

button.

Using the Playback Function

Forward/Reverse Search

dBAD

Press the () buttons for Search Function.

( 1 ➞ ( 2 ➞ ( 3 ➞ ( 4 ) 1 ➞ ) 2 ➞ ) 3 ➞ ) 4

✎ NOTE

` No sound is played in search mode. ` The playback search produces sound only when

searching at )1 and )2 speed.

` This function is available only for the CD-DA.

Skipping Scenes/Songs

dBAD

642 X 352

Function DVD/CD Pages Return

2010/01/01

Rotate Function

Press the PAUSE mode.

• GREEN(B) Button: Rotate 90° counterclockwise.

• YELLOW(C) Button:

GREEN(B) or YELLOW(C)

Rotate 90° clockwise.

button during the

✎ NOTE

` The maximum resolutions supported by this

product are 5120 x 3480 (or 19.0 MPixel) for standard JPEG files and 2048 x 1536 (or 3.0 MPixel) for progressive image files.

Press the [] buttons.

• Each time the button is pressed during playback, the previous or next chapter, track or directory (file) will be played.

• You cannot skip chapters consecutively.

Slow Motion Play

Press the PAUSE (#) button and then ) button for Slow Motion play.



*1 ➞*2 ➞*3

✎ NOTE

` No sound is heard during slow playback. ` Reverse slow playback does not work.

English 29

Basic Functions

English 31

FUNCTION

TV SOURCE

POWER

TITLE MENU

MUTE

REPEAT

VOL

TUNING

/CH

DSP /EQ

1 2 3

4 5 6

7 8

FUNCTION

TV SOURCE

TUNING

/CH

DSP /EQ

FUNCTION

TV SOURCE

MUTE

TUNING

/CH

DSP /EQ

Step Motion Play

Press the PAUSE button repeatedly.

• The picture moves forward one frame each time the button is pressed during playback.

✎ NOTE

` No sound is heard during step motion playback.

5 Minute Skip function

During playback, press the

• Playback skips 5 minutes forward whenever you press the + button.

• Playback skips 5 minutes backward whenever you press the _ button.

_,+

button.

Using the Title Menu

For DVDs containing multiple titles, you can view the title of each movie.

1. During playback, press the TITLE MENU button on the remote control.

2. Press the ▲▼_+ buttons to make the desired selection, then press the ENTER button.

TITLE MENU

✎ NOTE

` Depending on the disc, menu setup items may

vary and this menu may not be available.

Repeat Playback

dBAD

✎ NOTE

` This function is available only for the DivX that

contains time information.

Using the Disc Menu

You can view the menus for the audio language, subtitle language, profile, etc.

1. During playback, press the DISC MENU button on the remote control.

2. Press the ▲▼_+ buttons to make the desired selection, then press the

ENTER button.

✎ NOTE

` Depending on the disc, menu setup items may

vary and this menu may not be available.

30 English

DISC MENU

DVD/DivX Repeat

You can repeat the title, chapter or the section(A-B Repeat) of the DVD/DivX.

Repeat OFF

1. During DVD/DivX playback, press the

REPEAT button on the remote control.

2. Press the ▲▼ buttons to select a

desired repeat mode, then press the ENTER button.

3. Press the ▲▼ buttons to select OFF to return to normal play, then press the ENTER button.

Title ➞ Chapter ➞ A - ➞ Off

Title ➞

Folder ➞ All ➞ Off

REPEAT

+ 146 hidden pages

Samsung HT-E450, HT-E455 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual