Samsung HT-E3530, HT-E3550, HT E3500 User Manual

Download

Page 1

HT-E3500 HT-E3530 HT-E3550

5.1CH Blu-ray™

Home Entertainment System

user manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

HT-E3500_XY_0229.indd 1HT-E3500_XY_0229.indd 1 2012-02-29 오후 3:33:082012-02-29 오후 3:33:08

Page 2

Safety Information

Warning

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury.

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

WARNING

• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION

• Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

• The Mains plug is used as a disconnect device and shall stay readily operable at any time.

• This apparatus shall always be connected to an AC outlet with a protective grounding connection.

• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

This symbol indicates important instructions accompanying the product.

CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LÁSER CLASE 1

CLASS 1 LASER PRODUCT

This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

CAUTION

• INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.

2 English

HT-E3500_XY_0229.indd 2HT-E3500_XY_0229.indd 2 2012-02-29 오후 3:34:042012-02-29 오후 3:34:04

Page 3

Disc Storage & Management

• Holding Discs

- Fingerprints or scratches on a disc may reduce sound and picture quality or cause skipping.

- Avoid touching the surface of a disc where data has been recorded.

- Hold the disc by the edges so that fingerprints will not get on the surface.

- Do not stick paper or tape on the disc.

• Cleaning Discs

- If you get fingerprints or dirt on a disc, clean it with a mild detergent diluted in water and wipe with a soft cloth.

- When cleaning, wipe gently from the inside to the outside of the disc.

- Disc Storage

Do not keep in direct sunlight. Keep in a cool ventilated area. Keep in a clean protection jacket and store

vertically.

Handling Cautions

• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases, on the apparatus.

• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times.

• Do not touch the power plug with a wet hand. It can cause an electric shock.

• Do not plug multiple electric devices into the same wall socket. Ovedrloading a socket can cause it to overheat, resulting in a fire.

• Maintenance of the Cabinet

- Before connecting other components to this product, be sure to turn them off.

- If you move your product suddenly from a cold place to a warm place, condensation may occur on the operating parts and lens and cause abnormal disc playback. If this occurs, unplug the product, wait for two hours, and then connect the plug to the power outlet. Then, insert the disc, and try to play back again.

• If the product makes an abnormal noise or produces a burning smell or smoke, turn off the power switch immediately and disconnect the power plug from the wall outlet. Then, contact the nearest customer service centre for technical assistance. Do not use the product. Using the product as it is may cause a fire or an electric shock.

• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times.

Using the 3D Function

IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES. Read and understand the following safety information before using the 3D function.

• Some viewers may experience discomfort while viewing 3D TV such as dizziness, nausea, and headaches. If you experience any such symptom, stop viewing 3D TV, remove the 3D Active Glasses, and rest.

• Watching 3D images for an extended period of time may cause eye strain. If you feel eye strain, stop viewing 3D TV, remove your 3D Active Glasses, and rest.

• A responsible adult should frequently check on children who are using the 3D function. If there are any reports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest.

• Do not use the 3D Active Glasses for other purposes (such as general eyeglasses, sunglasses, protective goggles, etc.)

01 Safety Information

English 3

HT-E3500_XY_0229.indd 3HT-E3500_XY_0229.indd 3 2012-02-29 오후 3:34:062012-02-29 오후 3:34:06

Page 4

Safety Information

• Do not use the 3D function or 3D Active Glasses while walking or moving around. Using the 3D function or 3D Active Glasses while moving around may cause you to bump into objects, trip, and/or fall, and cause serious injury.

• If you want to enjoy 3D content, connect a 3D device (3D compliant AV receiver or TV) to the product’s HDMI OUT port using a high-speed HDMI cable. Put on 3D glasses before playing the 3D content.

• The product outputs 3D signals only through HDMI cable connected to the HDMI OUT port.

• As the video resolution in 3D play mode is fixed according to the resolution of the original 3D video, you can not change the resolution to your preference.

• Some functions such as BD Wise, screen size adjustment, and resolution adjustment may not operate properly in 3D play mode.

• You must use a high-speed HDMI cable for proper output of the 3D signal.

• Stay at least three times the width of the screen from the TV when watching 3D images. For example, if you have a 46 inch screen, stay 3.5 meters from the screen.

- Place the 3D video screen at eye level for the best 3D picture.

• When the product is connected to some 3D devices, the 3D effect may not function properly.

•

This product does not convert 2D content into 3D.

• “Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of the Blu-ray Disc Association.

Licence

• Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.

• Manufactured under licence under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTSHD and the Symbol together are registered trademarks & DTS-HD Master Audio | Essential is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

• ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. DivX Certified® to play DivX® video up to HD 1080p, including premium content. DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under licence. Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274

4 English

HT-E3500_XY_0229.indd 4HT-E3500_XY_0229.indd 4 2012-02-29 오후 3:34:082012-02-29 오후 3:34:08

Page 5

• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

• Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

• This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.

• Blu-ray Disc™, Blu-ray™, and the logos are trademarks of Blu-ray Disc Association.

•

This product uses Cinavia technology to limit the use of unauthorized copies of some commerciallyproduced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted. More information about Cinavia technology is provided at the Cinavia Online Consumer Information Centre at http://www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer Information Centre, P.O. Box 86851, San Diego, CA, 92138, USA.”

This product incorporates proprietary technology

under licence from Verance Corporation and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2010 Verance Corporation. All rights reserved by Verance. Reverse engineering or disassembly is prohibited.

• Open Source Licence Notice

- In the case of using open source software, Open Source Licences are available on the product menu.

manual may be reproduced or copied without the prior written permission of Samsung Electronics Co.,Ltd.

01 Safety Information

English 5

HT-E3500_XY_0229.indd 5HT-E3500_XY_0229.indd 5 2012-02-29 오후 3:34:112012-02-29 오후 3:34:11

Page 6

Contents

SAFETY INFORMATION

2 Warning 3 Disc Storage & Management 3 Handling Cautions 3 Using the 3D Function 4 Licence 5 Copyright

GETTING STARTED

7 Disk and Format Compatibility 8 Logos of Discs the product can play 11 Accessories 12 Front Panel 12 Rear Panel 13 Remote Control

CONNECTIONS

14 Connecting the Speakers 14 Attaching the Toroidal Ferrite Core to the

Power Cord of the Main Unit

15 Speaker Components 16 Installing the Speakers on the Tallboy

16 Connecting The Speakers 18 Connecting to a TV 18

19 Connecting to External Devices 19

20 Connecting the FM Antenna 20 Connecting to a Network Router

Stand

Method 1

with an HDMI Cable - Best Quality (Recommended)

Method 2

Video Cable - Good Quality

Method 1

External Analouge Component

Method 2

External Digital Audio Component

Connecting to a TV

Connecting to a TV with a

AUX IN : Connecting an

OPTICAL : Connecting an

SETTINGS

21 The Initial Settings Procedure 22 The Home Screen 23 Accessing the Settings Screen 24 Settings Menu Functions 28 Networks and the Internet 29 Upgrading Software 31 Setting Up AllShare

MEDIA PLAY

32 Using the Streaming Media Service 32 Playing Files on a USB Device 33 Playing a Disc with User Recorded

Content

33 Playing a Commercial Video Disc 33 Playing a Pre-Recorded Commercial

Audio Disc

34 Controlling Video Playback 36 Controlling Music Playback 37 Controlling Photo Playback 37 Listening to Radio 38 Using the Special Effects Remote Control

Buttons

38 Using the BD-LIVE™ 39 Using AllShare

APPENDIX

40 Additional Information 45 Troubleshooting 48 Specifications

6 English

HT-E3500_XY_0229.indd 6HT-E3500_XY_0229.indd 6 2012-02-29 오후 3:34:132012-02-29 오후 3:34:13

Page 7

Getting Started

Disk and Format Compatibility

Disc types and contents your product can play

Media Disc Type Details

Blu-ray Disc

3D Blu-ray Disc

VIDEO

MUSIC

PHOTO

NOTE

The product may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.

If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.

Your product will not play content that has been recorded on a DVD-R at a bit rate that exceeds 10 Mbps.

Your product will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds 30 Mbps.

Playback may not work for some types of discs, or when you use specific operations, such as angle change and aspect ratio

adjustment. Information about the discs is written in detail on the disc box. Please refer to this if necessary.

When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.

DVD-VIDEO, DVD-RW,

DVD-R, DVD+RW,

DVD+R

CD-RW/-R, DVD-RW/-R,

BD-RE/-R

CD-RW/-R, DVD-RW/-R,

BD-RE/-R

BD-ROM or BD-RE/-R disc recorded in the BD-RE format.

DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVDR/+R discs that have been recorded and finalised, or a USB storage media containing DivX, MKV, MP4 contents.

Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB storage media containing MP3 or WMA contents.

Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB storage media containing JPEG contents.

02 Getting Started

Disc types your product cannot play

• HD DVD

• DVD-ROM/PD/MVDisc, etc

NOTE

This product may not respond to all operating commands because some Blu-ray Disc, DVD, and CD discs allow specific or

limited operation and provide only certain features during playback. Please note that this is not a defect in the product.

Samsung cannot guarantee that this product will play every disc bearing the Blu-ray Disc, DVD or CD logo because disc

formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and CD software and/or the manufacture of discs.

Please contact the SAMSUNG Customer Care Centre, if you have questions or encounter difficulty when playing Blu-ray Disc,

DVD, or CD discs in this product. Also, refer to rest of this user manual for additional information on playback restrictions.

Some commercial discs and DVD discs purchased outside your region may not play on this product.

HT-E3500_XY_0229.indd 7HT-E3500_XY_0229.indd 7 2012-02-29 오후 3:34:172012-02-29 오후 3:34:17

• DVD-RAM

• Super Audio CD (except CD layer)

• DVD-RW(VR mode)

• CVD/CD-ROM/CDV/ CD-G/CD-I/LD (CD-Gs play audio only, not graphics.)

• 3.9 GB DVD-R Disc for Authoring.

English 7

Page 8

Getting Started

Region Code

Blu-ray players and discs are coded by region. These regional codes must match for a disc to play. If the codes do not match, the disc will not play. The Region Number for this product is displayed on the rear panel of the product.

Disc Type

Blu-ray Disc

DVD-VIDEO

NOTE



If the Region number of a Blu-ray Disc/DVDs does not correspond to the Region number of this product, the product cannot play the disc.

Region

Code

North America, Central America, South America, Korea, Japan,

Taiwan, Hong Kong and South East Asia.

Europe, Greenland, French territories, Middle East, Africa,

Australia and New Zealand.

India, China, Russia, Central and

South Asia.

The U.S., U.S. territories and

Canada

Europe, Japan, the Middle East,

Egypt, South Africa, Greenland

Taiwan, Korea, the Philippines,

Indonesia, Hong Kong

Mexico, South America, Central America, Australia,

New Zealand, Pacific Islands, Caribbean

Russia, Eastern Europe, India, most of Africa, North Korea,

Mongolia

China

Area

Logos of Discs the product can play

Blu-ray Disc 3D Blu-ray Disc

BD-LIVE Dolby

DTS DivX

PAL broadcast system in

U.K, France, Germany, etc.

Java

Supported Formats

Music File Support

File

Extension

*.mp3

*.wma

Container

MP3

WMA

Audio

Codec

MP3 -

WMA

Support Range

* Sampling rates (in

kHz) - 8, 11, 16, 22, 32, 44.1, 48

* Bit rates - All bit

rates from 5kbps to 384kbps

8 English

HT-E3500_XY_0229.indd 8HT-E3500_XY_0229.indd 8 2012-02-29 오후 3:34:212012-02-29 오후 3:34:21

Page 9

Video File Support

File Extension Container Video Codec Audio Codec Resolution

MP3 AC3

DTS

WMA

PCM

MP3 AC3

DTS

WMA

AAC

MP1, 2

AC3

DTS

*.avi

*.mkv

*.wmv

*.mp4

*.mpg

*.mpeg

AVI

MKV

WMV (wmv9)

MP4

DivX 3.11/4.x/5.1/6.0

MP4v3

H.264 BP/MP/HP

VC-1 AP

DivX 5.1/6.0

H.264 BP/MP/HP

VC-1 AP

VC-1 SM

MP4 (mp4v)

H.264 BP/MP/HP

MPEG1

MPEG2

H.264 BP/MP/HP

Limitations

- Even when the file is encoded by a supported codec mentioned above, a file might not be played if its content has a problem.

- Normal playback is not guaranteed if the file’s container information is wrong or the file itself is corrupted.

- Files a higher bit rate or frame rate than standard may stutter during sound/video playback.

- The Seek (skip) function is not available if the file’s index table is damaged.

Video decoder

- Supports up to H.264 Level 4.1 and AVCHD

- Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4

- MPEG4 SP, ASP : Below 1280 x 720 : 60 frames max Above 1280 x 720 : 30 frames max

- Does not support GMC 2 or higher

Audio decoder

- Supports WMA 7, 8, 9 and STD

- Does not support WMA sampling rate of 22050Hz mono.



Supported DivX subtitle file formats

*.ttxt, *.smi, *.srt, *.sub, *.txt

1920x1080

02 Getting Started

English 9

HT-E3500_XY_0229.indd 9HT-E3500_XY_0229.indd 9 2012-02-29 오후 3:34:322012-02-29 오후 3:34:32

Page 10

Getting Started

Notes on the USB connection

• Your product supports USB storage media, MP3 players, digital cameras, and USB card readers.

• The product does not support folder or file names longer than 128 characters.

• Some USB/External HDD/digital camera devices may not be compatible with the product.

• Your product supports the FAT 16, FAT 32, and NTFS files systems.

• Connect USB devices directly to the product’s USB port. Connecting through a USB cable may cause compatibility problems.

• Inserting more than one memory device into a multi-card reader may cause the reader to operate improperly.

• The product does not support the PTP protocol.

• Do not disconnect a USB device during a “loading” process.

• The bigger the image resolution, the longer the image takes to display.

• This product cannot play MP3 files with DRM (Digital Rights Management) downloaded from commercial sites.

• Your product only supports video that is under 30fps (frame rate).

• You must remove the USB storage device safely (by performing the “Safely Remove USB” function) to prevent possible damage to the USB memory. Press the HOME button to move to the home menu, press the YELLOW (C) button, and then press the E button.

• SAMSUNG is not responsible for any data file damage or data loss.

AVCHD (Advanced Video Codec High Definition)

• This product can play back AVCHD format discs. These discs are normally recorded and used in camcorders.

• The AVCHD format is a high definition digital video camera format.

• The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the conventional image compressing format.

• Some AVCHD discs use the “x.v.Colour” format. This product can play back AVCHD discs that use “x.v.Colour” format.

• “x.v.Colour” is a trademark of Sony Corporation.

• “AVCHD” and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd. and Sony Corporation.

NOTE

Some AVCHD format discs may not play, depending on

the recording conditions.

AVCHD format discs need to be Finalised.

“x.v.Colour” offers a wider colour range than normal DVD

camcorder discs.

Some DivX, MKV and MP4 format discs may not play,

depending on their video resolution and frame rate.

10 English

HT-E3500_XY_0229.indd 10HT-E3500_XY_0229.indd 10 2012-02-29 오후 3:34:352012-02-29 오후 3:34:35

Page 11

Accessories

Check for the supplied accessories below.

FUNCTION

MUTE

VOLUME

123 4

56 89

DISC MENU TITLE MENU

POPUP

Video Cable User Manual

(For Power cord)

FM Antenna Toroidal Ferrite Core Remote Control / Batteries (AAA size)



Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

SUBTITLE

TOOLS

RETURN

TUNER

MEMORY

ABCD

SOUND

TUNING

DOWN

EFFECT

REPEATHOME

INFO

EXIT

MO/ST

02 Getting Started

English 11

HT-E3500_XY_0229.indd 11HT-E3500_XY_0229.indd 11 2012-02-29 오후 3:34:372012-02-29 오후 3:34:37

Page 12

Getting Started

HDMI OUT

AUXINVIDEO

OUT

OPTICAL

DIGITAL

AUDIO IN

FM ANT

IMPEDANCE : 3

SPEAKERS OUT

CENTER

SUBWOOFER

FRONT LSURROUND

FRONT RSURROUND

LAN

HDMI OUT

AUXINVIDEO

OUT

OPTICAL

DIGITAL

AUDIO IN

FM ANT

IMPEDANCE : 3

SPEAKERS OUT

CENTER

SUBWOOFER

FRONT L

SURROUND

FRONT RSURROUND

LAN

Front Panel

PLAY/PAUSE ENTER

STOP OPEN/CLOSE

FUNCTION

VOLUME CONTROL

DISC TRAY

DISPLAY

USB HOST

POWER

REMOTE CONTROL

SENSOR

NOTE

To upgrade the product's software through the USB Host jack, you must use a USB memory stick.

When the product displays the Blu-ray Disc menu, you cannot start the movie by pressing the 6 button on the product or

the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the

button.

Rear Panel

COOLING FAN

LAN TERMINAL HDMI OUT EXTERNAL DIGITAL

CONNECTORS

NOTE

Ensure a minimum of 10 cm of clear space on all sides of the home cinema to ensure adequate ventilation.

Do not obstruct the cooling fan or ventilation holes.

AUX IN VIDEO OUT

FM ANTENNASPEAKER OUTPUT

AUDIO IN (OPTICAL)

12 English

HT-E3500_XY_0229.indd 12HT-E3500_XY_0229.indd 12 2012-02-29 오후 3:34:432012-02-29 오후 3:34:43

Page 13

Remote Control

Tour of the Remote Control

02 Getting Started

Turn the product on and off.

Adjust the volume.

Press numeric buttons to operate

options.

Press to view the disc menu.

Press to skip backwards or forwards.

Press to play a disc.

Press to stop a disc.

Selects the disc subtitle language.

Press to move to the Home screen.

Press to use the Tools menu.

Select on-screen menu items and

change menu value.

Return to the previous menu.

These buttons are used both for

menus on the product and also

several Blu-ray Disc functions.

Select the desired Dolby Pro Logic II

audio mode.

Press to apply sound effects.

FUNCTION

VOLUME

1 4 7

DISC MENU TITLE MENU

SUBTITLE

TOOLS

RETURN

ABCD

SOUND

EFFECT

MUTE

3 56 89

POPUP

REPEATHOME

INFO

EXIT

TUNER

MO/ST

MEMORY

TUNING

DOWN

Press to select Blu-ray's mode. (AUX, BD/DVD, etc.).

To open and close the disc tray.

Cut off the sound temporarily.

Use to enter the Popup menu/ Title menu.

Press to search backwards or forwards.

Press to pause a disc.

Allows you to repeat a title, chapter, track or disc.

Use to display the playback information when playing a Blu-ray/DVD disc.

Press to exit the menu.

Use to set a preset radio frequency.

Select MONO or STEREO for radio broadcasts.

Search for active FM stations and to change channels.

Installing batteries in the Remote Control

Make sure to match the “+” and “–” ends of the batteries with the

diagram inside the compartment.

Assuming typical TV usage, the batteries last for about one year.

The remote control can be used up to approximately 7 meters from the

product in a straight line.

HT-E3500_XY_0229.indd 13HT-E3500_XY_0229.indd 13 2012-02-29 오후 3:34:472012-02-29 오후 3:34:47

Battery size: AAA

English 13

Page 14

Connections

This section describes various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

Connecting the Speakers

Position of the product

Place it on a stand or cabinet shelf, or under the TV stand.

Selecting the Listening Position

The listening position should be located about 2.5 to 3 times the size of the TV's screen from the TV. For example, if you have a 46 inch screen, locate the listening position 2.92 to 3.50 meters from the screen.

Subwoofer

Front (L)

Surround (L)

Front Speakers

Centre

Front (R)

Product

Surround (R)

Place these speakers in front of your listening position, facing inwards (about 45°) toward you. Place the front speakers so that their tweeters will be at the same height as your ear. Align the front face of the front speakers with the front face of the centre speaker or place them slightly in front of the centre speakers.

Centre Speaker

It is best to install the Centre Speaker at the same height as the front speakers. You can also install it directly over or under the TV.

Place these speakers to the side of your listening position. If there isn't enough room, place these speakers so they face each other. Position them about 60 to

Surround Speakers

Subwoofer

90cm above your ear, facing slightly downward.

Unlike the front and centre speakers, the surround speakers are used mainly

for sound effects. Sound will not come from them all the time.

The position of the subwoofer is not so critical. Place it anywhere you like.

Attaching the Toroidal Ferrite Core to the Power Cord of the Main Unit

If you attach a Toroidal ferrite core to the power cord of the main unit, it will help to prevent RF interference from radio signals.

1. Pull the fixing tab of the Toroidal ferrite core to open it.

2. Make a loop twice in the main unit power cord.

Attach the Toroidal ferrite core to the main unit power cord as the figure shows and press it until it clicks.

14 English

HT-E3500_XY_0229.indd 14HT-E3500_XY_0229.indd 14 2012-02-29 오후 3:34:522012-02-29 오후 3:34:52

SUBWOOFER

SPEAKERS OUT

CENTER

FRONT LSURROUND

FRONT RSURROUND

LAN

IMPEDANCE : 3

Page 15

Speaker Components

HT-E3500

03 Connections

(L)(L) (R)(R)

HT-E3530

SCREW (5X20): 6EA

(L) (R)

HT-E3550

FRONT

STAND

SURROUND

STAND BASE

(L) (R)

STAND BASE

CENTRE

SPEAKER CABLE

CENTRE

SPEAKER CABLE

SUBWOOFER

SCREW (5X15): 2EA

SUBWOOFERFRONT STAND SURROUND

SCREW (5

X20): 12EA

SCREW (5X15): 4EA

(L) (L)(R) (R)

FRONT SURROUND

HT-E3500_XY_0229.indd 15HT-E3500_XY_0229.indd 15 2012-02-29 오후 3:34:562012-02-29 오후 3:34:56

CENTRE

SUBWOOFER

English 15

Page 16

Connections

Installing the Speakers on the Tallboy Stand

* HT-E3530 only - Front Speakers * HT-E3550 only - Front/Surround Speakers

1. Turn the Stand Base upside-down and connect it to the Stand.

2. Use the driver to combine the screws (5x20) on the 3 marked holes.

3. Straighten a supplied speaker wire and put in the hole on the centre of Stand Base.

4. Connect the upper Speaker to the assembled Stand.

5. Insert a screw (5x15) clockwise into the hole on the rear of the speaker using a screwdriver. And then connect a speaker cable.

6. This is the appearance after the speaker is installed. Follow this steps to install other speaker.

Stand

Speaker

Stand Base

Stand

Connecting The Speakers

1. Match each speaker cable bundle to the correct speaker by matching the

colour coded plug on each bundle to the coloured sticker on the bottom of each speaker.

2. To attach speaker wire to each speaker: a. Press down the red tab on the back of the speaker, insert the red wire,

and then release the tab.

b. Press down the black tab on the back of the speaker, insert the black

wire, and then release the tab.

3. Connect the speaker wire plugs to the back of the product by matching the colours of the speaker plugs to the colours of the speaker jacks.

16 English

HT-E3500_XY_0229.indd 16HT-E3500_XY_0229.indd 16 2012-02-29 오후 3:35:332012-02-29 오후 3:35:33

Black

Red

Page 17

IMPEDANCE : 3

SPEAKERS OUT

CENTER

SUBWOOFER

FRONT LSURROUND

FRONT RSURROUND

LAN

IMPEDANCE : 3

SPEAKERS OUT

SURROUND

In case of HT-E3500

03 Connections

Front Speaker (L)

Surround Speaker (L)

Centre Speaker

Surround Speaker (R)

Front Speaker (R)

Subwoofer

Refer to page 15 for the speakers of HT-E3530/HT-E3550.

CAUTION



If you want to install the product on the wall, fasten the screws or nails on the wall firmly and use the holes on the rear of speaker to install. However, when you install it, accessories (nails or screws) and installation is not provided by the company.

Do not let children play with or near the speakers. They could get hurt if a speaker falls. When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct.  Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien substances into the duct (hole)

of the subwoofer speaker.

 Do not hang the subwoofer on the wall through the duct (hole).

NOTE



If you place a speaker near your TV set, the screen colour may be distorted because of the magnetic field.

English 17

HT-E3500_XY_0229.indd 17HT-E3500_XY_0229.indd 17 2012-02-29 오후 3:35:402012-02-29 오후 3:35:40

Page 18

Connections

HDMI OUT

AUXINVIDEO

OUT

OPTICAL

DIGITAL AUDIO IN

FM ANT

OUT

VIDEO IN HDMI IN

HDMI OUT

AUXINVIDEO

OUT

OPTICAL

DIGITAL AUDIO IN

FM ANT

IMPEDANCE : 3

SPEAKERS OUT

CENTER

SUBWOOFER

FRONT LSURROUND

FRONT RSURROUND

LAN

Connecting to a TV

Select either Method 1 or Method 2.

AUX

IDEO

FM AN

OPTICAL

HDMI OU

(Cable not supplied.)

Method 1 Method 2

Method 1 Connecting to a TV with an HDMI Cable - Best Quality (Recommended)

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.

If the TV supports ARC, you can hear TV sound from home cinema with only connect this cable.

AUDIO I

IGITAL

Method 2 Connecting to a TV with a Video Cable - Good Quality

Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN jack on your TV.

NOTE

The VIDEO Out jack always outputs in the 576i/480i resolution regardless of the resolution set in the Setup menu. Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright protection systems and

the picture will be distorted on the television.

HT-E3500_XY_0229.indd 18HT-E3500_XY_0229.indd 18 2012-02-29 오후 3:35:432012-02-29 오후 3:35:43

18 English

Page 19

Connecting to External Devices

HDMI OUT

AUXINVIDEO

OUT

OPTICAL

DIGITAL AUDIO IN

FM ANT

XIV

OPTICAL

DIGITAL

AUDIO IN

To select the correct mode for an external device, press the FUNCTION button. Each time you press the button, the mode changes in this order : BD/DVD  D. IN  AUX  FM

IDEO OU

SPEAKERS OUT

CENTER

FRONT LSURROUND

IMPEDANCE : 3

SUBWOOFER

FRONT RSURROUND

AUXINVIDEO

LAN

OUT

FM ANT

OPTICAL

DIGITAL

HDMI OUT

AUDIO IN

HDMI OU

(Cable not supplied.) (Cable not supplied.)

Method 1 Method 2

FM AN

03 Connections

Red

External Devices

OPTICAL OUT

White

Method 1 AUX IN : Connecting an External Analouge Component

Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on the external analouge component.  Select the AUX mode.

• Be sure to match the colours on the cable plugs to the colours on the input and output jacks.

Method 2 OPTICAL : Connecting an External Digital Audio Component

To connect the digital audio output of digital signal components such as Cable Boxes and Satellite Receivers (Set-Top-Boxes).

Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the Digital Optical Out jack of the external digital device using a digital optical cable.

Select the D. IN mode.



NOTE

To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV. This system supports Digital sampling frequencies of 32 kHz or higher from external digital components. This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.

English 19

HT-E3500_XY_0229.indd 19HT-E3500_XY_0229.indd 19 2012-02-29 오후 3:35:472012-02-29 오후 3:35:47

Page 20

Connections

HDMI OUT

AUXINVIDEO

OUT

OPTICAL

DIGITAL AUDIO IN

IMPEDANCE : 3

SPEAKERS OUT

CENTER

SUBWOOFER

FRONT LSURROUND

FRONT RSURROUND

LAN

HDMI OUT

AUXINVIDEO

OUT

OPTICAL

DIGITAL

AUDIO IN

SPEAKERS OUT

CENTER

SUBWOOFER

FRONT

SURROUND

FRONT

SURROUND

FM ANT

HDMI OUT

AUXINVIDEO

OUT

OPTICAL

DIGITAL AUDIO IN

FM ANT

IMPEDANCE : 3

SPEAKERS OUT

CENTER

SUBWOOFER

FRONT LSURROUND

FRONT RSURROUND

LAN

Connecting the FM Antenna

FM Antenna (supplied)

1 . Connect the FM antenna supplied to the FM ANTENNA Jack. 2 . Slowly move the antenna wire around until you find a location where reception is good, then fasten it

to a wall or other rigid surface.

NOTE

This product does not receive AM broadcasts.

Connecting to a Network Router

Broadband

modem

Broadband service

Broadband modem

(with integrated router)

Router

NOTE

 Internet access to Samsung’s software update server may not be allowed, depending on the router you use or your ISP’s

policy. For more information, contact your ISP (Internet Service Provider).

 DSL users, please use a router to make a network connection.

For the AllShare function, a PC must be connected in the network as shown in the figure.

20 English

HT-E3500_XY_0229.indd 20HT-E3500_XY_0229.indd 20 2012-02-29 오후 3:35:502012-02-29 오후 3:35:50

Page 21

Settings

The Initial Settings Procedure

• The Home menu will not appear if you do not configure

the initial settings.

• The OSD (On Screen Display) may change in this

product after you upgrade the software version.

• The access steps may differ depending on the menu

you selected.

1 . Turn on your TV after connecting the product,

and then turn on the product. When you turn on the product for the first time, the product automatically displays the Initial Settings Language screen.

Initial Settings I On-Screen Language

Select a language for the on-screen displays.

English

Français

Deutsch

Español

Italiano

Nederlands

Move s Select

2 . Press the ▲▼ buttons to select the desired

language, and then press the E button.

3 . Press the E button to start function setup.

Initial Settings

TV Aspect and Network will be set.

Each setting may be changed later under "Settings".

Start

a Previous

4 . The TV Aspect screen appears. Press the

▲▼ buttons to select desired a TV Aspect ratio, and then press the E button.

" Select

You have four choices: 16:9 Original - For widescreen TVs. Displays

widescreen pictures in their original 16:9 format and 4:3 pictures (the old, standard format) in 4:3 pillar box format with black bars on the left and right.

16:9 Full - For widescreen TVs. Displays widescreen pictures in their original 16:9 format and expands 4:3 pictures to fill the 16:9 screen.

4:3 Letter Box - For older, standard screen analouge TVs. Displays 4:3 pictures in full screen and 16:9 pictures in letter box format that retains the 16:9 aspect ratio but puts black bars above and below the picture.

4:3 Pan-Scan - For older, standard screen analouge TVs. Displays 4:3 pictures in full screen and 16:9 pictures in Pan-Scan format that fills the screen, but cuts off the left and right sides of the picture and enlarges the middle vertically.

5 . The Network - Wired screen appears.

- If you have a network with dynamic IP addresses - and most people do - select Auto, press the E button, and then go to Step 6.

- If you have a network with static IP addresses, we suggest you select Skip by pressing the BLUE (D) button, and then go to "Configuring Your Network Connection" on page 27 after you have completed the initial setup. "Configuring Your Network Connection" provides a full explanation of how to configure your network connection manually.

- If you have no network, select Skip by pressing the BLUE (D) button. The Initial Settings Complete screen appears, and then the Home screen appears.

NOTE

If you skip network setup here or the setup does not

work correctly, you can go to "Configuring Your Network Connection" on page 27 to set up the product's network connection later.

04 Settings

English 21

HT-E3500_XY_0229.indd 21HT-E3500_XY_0229.indd 21 2012-02-29 오후 3:35:572012-02-29 오후 3:35:57

Page 22

Settings

Initial Settings I Network - Wired

Choose the method to configure Internet Protocol (IP).

Please make sure that the Ethernet cable is connected.

Auto : Configure IP automatically.

Manual

Auto

a Previous d Skip

< Move "

Select

6 . The product verifies the network connection

and then connects to the network. When it is done, press the E button. The Initial Settings Complete screen appears, and then the Home screen appears.

Initial Settings I Network - Wired

MAC Address (d0:66:7b:dc:28:fc)



IP Address, Subnet Mask, Gateway, DNS Server



Gateway Ping



Internet Service Test



Your network is operating properly. If you still have a problem, contact your network service provider.

" Select

NOTE

If you want to display the Initial Setting screen again and

make changes, select the Reset option. (See page 27)

If you use an HDMI cable to connect the product to an

Anynet+(HDMI-CEC)-compliant Samsung TV and 1.) You have set the Anynet+(HDMI-CEC) feature to ON in both the TV and the product and 2.) You have set the TV to a language supported by the product, the product will select that language as the preferred language automatically.

The Home Screen

™

View Devices

Settings

Enter

No Disc a Change Device

Videos. Play videos located on discs, USB

devices, or your PC.

Photos. View photos located on discs, USB

devices, or your PC.

Network Service. Select a network service:

YouTube.

Music. Play music located on discs, USB devices,

or your PC.

Settings. Set various functions to suit your

personal preferences.

Displays the coloured buttons on your remote that

you can press to access or perform functions.

Selecting an Option on the Home Screen

1 . To select an option on the Home screen,

move the cursor using the ◄► buttons until it highlights the option of your choice, and then press the E button.

NOTE

To play or view video, music, or photo files located on

your PC, you must connect your home theater and PC to a home network and you must download, install, and configure the AllShare software on your PC. (See page

31.)

22 English

HT-E3500_XY_0229.indd 22HT-E3500_XY_0229.indd 22 2012-02-29 오후 3:36:052012-02-29 오후 3:36:05

Page 23

Accessing the Settings Screen

gpp

TOOLS

RETURN

EXIT

INFO

SUBTITLE

REPEATHOME

1 . Select Settings on the Home screen, and

then press E. The Settings screen appears.

Settings

Display ► 3D Settings

Audio TV Aspect Ratio : 16:9 Original

Network

System Resolution : Auto

Language

Security HDMI Color Format : Auto

General HDMI Deep Color : Auto

Support Progressive Mode : Auto

BD Wise : On

Movie Frame (24 Fs) : Auto

2 . To access the menus, sub-menus, and

options on the Settings screen, please refer to the remote control illustration below.

NOTE

If you leave the product in the stop mode for more than

5 minutes without using it, a screen saver will appear on your TV. If the product is left in the screen saver mode for more than 20 minutes, the power will automatically turn off.

Buttons on the Remote Control Used for the Settings Menu

NOTE

The E button on the product's front panel can be

used for same purpose as the E button on the remote control.

Detailed Function Information

Each Settings function, menu item, and individual option is explained in detail on-screen. To view an explanation, use the ▲▼◄► buttons to select the function, menu item, or option. The explanation will usually appear on the bottom of the screen. A short description of each Settings function starts on next page. Additional information on some of the functions is also in the Appendix of this manual.S

04 Settings

HOME Button : Press to move to the Home screen.

RETURN (') Button : Return to the previous menu.

(Enter) / DIRECTION Button :

~Press

an item.

~Press the E button to activate the currently

selected item or confirm a setting.

EXIT Button : Press to exit the current menu.

HT-E3500_XY_0229.indd 23HT-E3500_XY_0229.indd 23 2012-02-29 오후 3:36:112012-02-29 오후 3:36:11

to move the cursor or select

▲▼◄►

English 23

Page 24

Settings

Settings Menu Functions

Display

3D Settings

TV Aspect

Ratio

BD Wise

Resolution

Movie Frame

(24 Fs)

Set up the 3D related functions.

3D Blu-ray Playback Mode: Select whether to play a Blu-

ray Disc with 3D contents in 3D Mode. If you move to the Home menu while in 3D mode, the product will switch to 2D automatically.

Screen Size: Enter the size of the TV attached to the

product. The product will automatically adjust the 3D output to the screen size of the TV.

Lets you adjust the output of the product to the screen size of your TV. See page 21, Step 4 for a description of the screen size options.

BD Wise is Samsung’s latest inter-connectivity feature. When you connect a Samsung product and a Samsung TV with BD Wise to each other via HDMI, and BD Wise is on in both the product and TV, the product outputs video at the video resolution and frame rate of the Blu-ray/DVD Disc.

Lets you set the output resolution of the HDMI video signal to Auto, 1080p, 1080i, 720p, 576p/480p. If Composite is connected, the resolution supports only 576i/480i. The number indicates the number of lines of video per frame. The i and p indicate interlaced and progressive scan, respectively. The more lines, the higher quality.

Setting the Movie Frame (24 Fs) feature to Auto lets the product adjust its HDMI output to 24 frames per second automatically for improved picture quality if attached to a 24Fs compatible TV.

• You can enjoy the Movie Frame (24 Fs) feature only on a TV supporting this frame rate.

• Movie Frame is only available when the product is in the HDMI 1080i or 1080p output resolution modes.

HDMI Color

Format

HDMI Deep

Color

Progressive

Mode

24 English

HT-E3500_XY_0229.indd 24HT-E3500_XY_0229.indd 24 2012-02-29 오후 3:36:162012-02-29 오후 3:36:16

Lets you set the colour space format for the HDMI output to match the capabilities of the connected device (TV, monitor, etc).

Lets you set the product to output video from the HDMI OUT jack with Deep Colour. Deep Colour provides more accurate colour reproduction with greater colour depth.

Lets you improve picture quality when viewing DVDs.

Page 25

Audio

Speaker Settings

Speaker

Selection

Audio Return

Channel

You can set the speaker options.

Lets you select which speakers you want active, either the TV's speakers or the Home theater's speakers.

Lets you direct the sound from the TV to the Home Cinema speakers. Requires an HDMI connection and an Audio Return Channel (ARC) compatible TV.

• When Audio Return Channel is set to Auto, the home cinema automatically selects either ARC or optical input as the audio source, depending on your connections. If Audio Return Channel is active, optical input does not work.

04 Settings

Digital Output

Dynamic

Range Control

Audio Sync

Lets you set the Digital Output to match the capabilities of the AV receiver you’ve connected to the product. For more details, please refer to the digital output selection table. (See page 44)

Lets you apply dynamic range control to Dolby Digital, Dolby Digital Plus, and Dolby True HD audio.



Auto: A

utomatically controls the dynamic range of Dolby

rueHD audio, based on information in the Dolby TrueHD

oundtrack. Also turns dynamic range control on for Dolby

igital and Dolby Digital Plus.



ff: Leaves the dynamic range uncompressed, letting you

ear the original sound.



n: Turns dynamic range control on for all three Dolby

ormats. Quieter sounds are made louder and the volume of

oud sounds is reduced.

When the product is attached to a digital TV, lets you adjust the audio delay so that the audio syncs with the video. You can set the delay between 0 and 300 milliseconds.

English 25

HT-E3500_XY_0229.indd 25HT-E3500_XY_0229.indd 25 2012-02-29 오후 3:36:182012-02-29 오후 3:36:18

Page 26

Settings

Network

System

Wired Network Settings

Network Test

Network

Status

BD-Live

Internet

Connection

Initial Settings

Anynet+

(HDMI-CEC)

BD Data

Management

DivX® Video

On Demand

For more information about Network Settings and network functions, see "Networks and the Internet" starting on page

28.

Lets you test the Internet Protocol setup to see if it is working correctly.

Lets you check whether a connection to the network and the Internet have been established.

Lets you allow or prohibit an Internet connection for the BDLive service.

Lets you re-run the Initial Settings procedure. See page 21 for details.

Anynet+ is a convenient function that offers linked operations with other Samsung products that have the Anynet+ feature and lets you control those products with one Samsung TV remote. To operate this function, you must connect this product to an Anynet+ Samsung TV using an HDMI cable.

Lets you manage the contents you downloaded through a Bluray disc that supports the BD-Live service. You can view the information about the USB device you are using for BD Live data storage including the storage space. You can also delete BD Live data and change the device.

View DivX® VOD Registration Codes to purchase and play DivX® VOD contents.

Language

26 English

HT-E3500_XY_0229.indd 26HT-E3500_XY_0229.indd 26 2012-02-29 오후 3:36:202012-02-29 오후 3:36:20

You can select the language you prefer for the On-Screen Menu, disc menu, etc.

• The selected language will only appear if it is supported on the disc.

Page 27

Security

The default PIN is 0000. Enter the default PIN to access the security function if you haven't created your own PIN.

BD Parental

Rating

Prevents playback of Blu-ray Discs with a rating equal to or above a specific age ratings unless the PIN is entered.

04 Settings

General

Support

DVD Parental

Rating

YouTube Lock

Change PIN

Time Zone

Software Upgrade

Contact

Samsung

Terms of

Service

Agreement

Reset

Prevents playback of DVDs with a rating above a specific numerical ratings unless the PIN is entered.

If the lock set to On, you must enter the PIN to use the service.

Change the 4-digit PIN used to access security functions.

You can specify the time zone that is applicable to your area.

For more information about the Software Upgrade function, see "Upgrading Software" on page 29.

Provides contact information for assistance with your product.

View the general disclaimer regarding third party contents and services.

All settings will revert to the default except for the network settings. The default security password is 0000.

English 27

HT-E3500_XY_0229.indd 27HT-E3500_XY_0229.indd 27 2012-02-29 오후 3:36:222012-02-29 오후 3:36:22

Page 28

Settings

Networks and the Internet

When you connect this product to a network, you can use network based applications and functions such as BD-LIVE and upgrade the product's software through the network connection.

Configuring Your Network Connection

Before you begin, contact your ISP to find out if your IP address is static or dynamic. If it is dynamic, we recommend you use the Automatic procedure below. If it is static, you must use the Manual procedure that follows.

• Before you begin, confirm that the product is

connected to your router with a network cable.



Automatic

To start the configuration process, follow these steps:

1 . In the Home menu, select Settings, and then

press the E button.

2 . Select Network, and then press the E

button.

3 . Select Wired Network Settings, and then

press the E button. The Wired Network Settings screen appears.

4 . Press the

Setup menu. Use press the E button.

button on the Internet Protocol

►

button to select Auto, and then

▲▼

Settings

Display

Audio

Network

System

Language

Security

General

Support

Wired Network Settings

Internet Protocol Setup : Auto

IP Address : 0 0 0 0

Subnet Mask :

Gateway :

DNS : Auto

DNS Server : 0 0 0 0

> Move "

0 0 0

Select

Return



6 . After the Network function has acquired

the network values, press the RETURN (') button.

7 . Select Network Test, and then press E.

The home cinema validates the network connection. When it is done, press the RETURN (') button.



Manual

If you have a static IP address or the Automatic procedure does not work, you’ll need to set the Network Settings values manually.

Settings

Display

Audio

Network

System

Language

Security

General

Support

Wired Network Settings

Internet Protocol Setup : Manual

IP Address : 0 0 0 0

Subnet Mask :

Gateway :

DNS : Manual

DNS Server :

255

> Move "

255 255 0

0 0 0

Select



Return

1 . Follow the first four steps in the Automatic

procedure, but select Manual instead of Auto in Step 4.

2 . Press the ▼ button to go to the first entry

field (IP Address).

3 . Use the number buttons on your remote to

enter numbers.

4 . When done with each field, use the ► button

to move successively to the next field. You can also use the other arrow buttons to move up, down, and back.

5 . Enter the IP Address, Subnet Mask, and

Gateway values. 6 . Press the ▼ button to go to DNS. 7 . Press the ▼ button to go to the first DNS

entry field. Enter the numbers as above. 8 . Press the RETURN (') button on your

remote.

5 . The Network function acquires and fills in the

values for IP Address, Subnet Mask, etc., automatically.

28 English

HT-E3500_XY_0229.indd 28HT-E3500_XY_0229.indd 28 2012-02-29 오후 3:36:242012-02-29 오후 3:36:24

Page 29

9 . Select Network Test, and then press E.

When the test is completed, press RETURN (') button to exit to the previous screen.

10 . Select Network Status, and then press E.

11 . The Network Status screen appears.

The product verifies the network connection and then connects to the network. When it is done, highlight OK, and then press E.

NOTE

You can get the Network values from your Internet

provider. You can also view these values on most Windows computers. For instructions, see "Getting the Network Setting Values" on this page.

< Getting the Network Settings Values >

You can view your Network Settings values on most Windows computers. To view the Network Settings values, follow these steps:

• Windows XP

1 · Right click the Network icon on the bottom

right of the Windows desktop.

2 · In the pop-up menu, click Status. 3 · On the dialog that appears, click the Support

tab.

4 · On the Support tab, click the Details button.

The Network settings are displayed.

• Windows 7

1 · Click the Network icon on the bottom right of

the Windows desktop.

2 · In the pop-up menu, click Network and

Sharing Centre.

3 · On the dialog that appears, click the Local

Area Connection.

4 · On the Support tab, click the Details button.

The Network settings are displayed.

NOTE

Depending on your Windows version, the information may

differ.

Upgrading Software

The Software Upgrade menu allows you to upgrade the product’s software for performance improvements or additional services.

• Never turn the product off or back on manually during

the update process.

1 · In the Home menu, select Settings, and then

press the E button.

2 · Select Support, and then press the E

button.

3 · Select Software Upgrade, and then press

the E button.

4 · Select one of the following methods:

• By Online

• By USB

• Auto Upgrade Notification

5 · Press the E button.

Directions for each method begin below.

NOTE

The update is complete when the product turns off

after restarting. Press the POWER button to turn on the updated product for your use. Never turn the product on or off manually during the update process.



Samsung Electronics takes no legal responsibility for product malfunction caused by an unstable Internet connection or consumer negligence during a software upgrade.

If you want to cancel the upgrade while the upgrade

software is downloading, press the E button.

By Online

Your product must be connected to the Internet to use the By Online function. Remove all discs before you begin.

1 · Select By Online, and then press the E

button. The Connecting to Server message appears.

2 · If an update is available, a popup message

appears asking if you want to upgrade. If you select Yes, the product turns off automatically, turns on, and then begins the upgrade.

04 Settings

English 29

HT-E3500_XY_0229.indd 29HT-E3500_XY_0229.indd 29 2012-02-29 오후 3:36:292012-02-29 오후 3:36:29

Page 30

Settings

IMPORTANT

Never turn the home cinema on or off manually during a

software upgrade.

3 · The update progress popup appears. When

4 · Press the POWER button to turn on the

NOTE

The update is complete when the product turns off

after restarting. Press the POWER button to turn on the updated product for your use.

Never turn the product off or on manually during the

update process.

Samsung Electronics takes no legal responsibility for

a product malfunction caused by an unstable internet connection or consumer negligence during software upgrade.

By USB

1 · Visit www.samsung.com. 2 · Click SUPPORT on the top right of the page. 3 · Enter the product's model number into the

4 · Click Get downloads in the centre of the

5 · Click Firmware in the centre of the page. 6 · Click the ZIP icon in the File column on the

7 · Click OK in the pop-up that appears to

8 · Unzip the zip archive to your computer. You

9 · Copy the folder to a USB flash drive. 10 · Make sure no disc is inserted in the product,

11 · In the product’s menu, go to Settings >

12 · Select By USB.

the update is completed, the product turns off automatically again.

product.

search field, and then click Find Product.

page below the Downloads header.

right side of the page.

download and save the firmware file to your PC.

should have a single folder with the same name as the zip file.

and then insert the USB flash drive into the USB port of the product.

Support > Software Upgrade.

NOTE

There should be no disc in the product when you upgrade

the software using the USB Host jack.

Never turn the product off or on manually during the

update process.

When the software upgrade is done, check the software

details in the Software Upgrade menu.

Auto Upgrade Notification

If your product is connected to the network and you set Auto Upgrade Notification on, the product will notify you if a new software version is available with a pop-up message.

1 · Turn on the product. 2 · In the Software Upgrade menu, set Auto

Upgrade Notification to On.

If there is a new software version available,

the product will notify you with a pop-up

message. 3 · To upgrade the firmware, select Ye s. The

product turns off automatically, turns on, and

then begins the upgrade. 4 · The update progress popup will appear.

When the update is completed, it will turn

back off automatically. 5 · Press the POWER button to turn on the

product.

NOTE

The update is complete when the product turns off

after restarting. Press the POWER button to turn on the updated product for your use. Never turn the product on or off manually during the update process.

Samsung Electronics shall take no legal responsibility

for product malfunction caused by unstable of internet connection or consumer negligence during software upgrade.

30 English

HT-E3500_XY_0229.indd 30HT-E3500_XY_0229.indd 30 2012-02-29 오후 3:36:312012-02-29 오후 3:36:31

Page 31

Setting Up AllShare

AllShare enables you to play music, video and photo files in your PC using the product. To use AllShare, you must connect the product to your PC via the network (See page 20) and install the SAMSUNG PC Share Manager on the PC.

To Download the AllShare Software

To use AllShare with your PC, you must install AllShare software on your PC. You can download the PC software and get detailed instructions for using AllShare from the Samsung.com website.

1 · Go to www.samsung.com. 2 · Click SUPPORT at the top of the page. 3 · On the Support page, enter the model

number of your product into the Model Number field, and then press the E button.

4 · On the page that appears, click Get

downloads on the left side under Downloads. The Download Centre appears.

5 · On the Download Centre page, click the

Software tab.

6 · On the software tab, click the File icon on

the right side of the AllShare line.

7 · In the pop-up that appears, click Save File. 8 · Find the AllShare install file on your disk, and

then double click the file.

9 · In the pop-up that appears, click Run, and

then follow the directions that appear on your screen.

04 Settings

Download the AllShare Installation/Instruction manual from the same Software Tab by clicking the corresponding PDF file symbol in the File column on the right. The file, in PDF format, will download and open. Follow the directions to install and setup AllShare. You can view and/or save the file.

NOTE

To use AllShare with your smartphone, you need to

connect your set & smartphone to the same router.

English 31

HT-E3500_XY_0229.indd 31HT-E3500_XY_0229.indd 31 2012-02-29 오후 3:36:332012-02-29 오후 3:36:33

Page 32

Media Play

Using the Streaming Media Service

• To use the Streaming Media Service, your home

cinema must be connected to the Internet. You also may need a vendor account for some services.

Use the

buttons in the Home menu to

▲▼◄►

move to YouTube service, and then press the E button.

™

You can view video streamed by YouTube.

Playing Files on a USB Device

You can play multimedia files located on a connected USB device.

1 · Move to the Home menu. 2 · In Stop mode, connect the USB storage

device to the USB port on the front panel of the product. The message “Do you want to

access the device?” will be displayed.

3 · Press the ◄► button to select Yes , then

press the E button.

4 · Press the RED (A) button.

™

USB DISK

USB DISK a Change Device  Safely Remove USB d View Devices " Enter

5 · Press the ▲▼ buttons to select USB Flash

Mem or Disk, then press the E button.

6 · Press the ◄► buttons to select Videos,

Music or Photos, then press the E button.

7 · If files appear on the screen go to Step 8.

If file folders appear on the screen, use the

▲▼◄► buttons to select a folder, press E,

and then go to Step 8. 8 · Use the ▲▼◄► buttons to select a file to

play or view, and then press the E button.

-1

. Press the BLUE (D) button.

™

USB DISK

USB DISK d HOME " Enter

5-1. Press the ◄► buttons to select USB Flash

Mem or Disk, then press the E button.

-1

. Press the ▲▼ buttons to select Videos,

Music or Photos, then press the E button.

-1

. If files appear on the screen go to Step 8-1.

If file folders appear on the screen, use the

▲▼◄► buttons to select a folder, press E,

and then go to Step 8-1.

-1

. Use the ▲▼◄► buttons to select a file to

play or view, and then press the E button.

NOTE

To prevent possible damage to the USB memory, you

must remove the USB storage device safely using the “Safely Remove USB” function. Press the HOME button to move to the Home menu, select the YELLOW (C) button, and then press the E button.

To listen to your music files with 5.1 channel sound, you

must set the Dolby Pro Logic II mode to MATRIX. (See page 38)

32 English

HT-E3500_XY_0229.indd 32HT-E3500_XY_0229.indd 32 2012-02-29 오후 3:36:342012-02-29 오후 3:36:34

Page 33

Playing a Disc with User Recorded

TRACK001

Content

You can play multimedia files you have recorded on DVD or CD discs.

1 ·

Turn on the home cinema.

2 ·

Open the disc tray, place a user recorded disc into the disc tray with the disc’s label facing up, and then close the tray.

3 ·

After the disc loads, press the RED (A) button.

4 ·

Press the ▲▼ buttons to select CD or DVD, and then press the E button.

5 ·

Press the ◄► buttons to select Videos, Music, or Photos, then press the E button.

6 ·

If files appear on the screen, go to Step 7. If file folders appear on the screen, use the ◄► buttons to select a folder, press E, and then go to Step 7.

7 ·

Use the ◄► buttons to select a file to play or view, and then press the E button.

-1

. After the disc loads, press the BLUE (D)

button.

-1

. Press the ◄► buttons to select

and then press the E button.

-1

. Press the ▲▼ buttons to select

Music, or Photos

, and then press the E

button.

-1

. If files appear on the screen go to Step 7-1.

If file folders appear on the screen, use the ▲▼ buttons to select a folder, press E, and then go to Step 7-1.

-1

. Use the ▲▼ buttons to select a file to play or

view, and then press the E button.

CD or DVD

Videos,

Playing a Commercial Video Disc

Place a disc into the disc tray with the disc’s label facing up and then close the disc tray. Playback starts automatically. If it does not playback automatically, move to Videos in the Home menu and press the E button.

In most cases, commercial videos will display a disc menu. To play the movie on the disc, select Play on the disc menu, and then press E.

NOTE



For more information about playing videos, go to "Controlling Video Playback" on page 34.

Playing a Pre-Recorded Commercial Audio Disc

1 ·

Insert an Audio CD (CD-DA) or an MP3 Disc into the disc tray.

• For an Audio CD (CD-DA), the first track will be played automatically. Tracks on a disc are played in the order in which they were recorded on the disc.

For an MP3 disc, press the ◄► buttons to

•

select Music, then press the E button.

Playlist

TRACK 001

00:08 / 05:57

2 ·

To play a particular track, use the ▲▼ buttons

TRACK 001

TRACK 002

TRACK 003

TRACK 004

TRACK 005

TRACK 006

s Pause Tools '

on the remote to select the track, and then press the E button.

Return

05 Media Play

1/12

05:57

04:27

04:07

03:41

03:17

03:35

NOTE



For more information about playing music, go to "Controlling Music Playback" on page 36.

English 33

HT-E3500_XY_0229.indd 33HT-E3500_XY_0229.indd 33 2012-02-29 오후 3:36:412012-02-29 오후 3:36:41

Page 34

Media Play

SUBTITLE

REPEATHOME

DISC MENU TITLE MENU

POPUP

Controlling Video Playback

You can control the playback of video files located on Blu-ray, DVD, and CD discs, and on USB storage devices. Depending on the media, some of the functions described in this manual may not be available.

Buttons on the Remote Control used for Video Playback



Using the disc menu, title menu, popup menu and title list



Repeat Playback

1 · During playback, press the REPEAT

2 · Press the ▲▼ buttons to select a

NOTE |

Repeat a Title



or Chapter

3 · To return to normal play, press the

1 · During playback, press the REPEAT

2 · Press the ▲▼ buttons to select

NOTE |



Repeat a Section

3 ·

4 ·

5 · To return to normal play, press the

6 · Press the E button.

NOTE |



34 English

button on the remote control.

Chapter, All or Title, then press the

button.

The screen may not display Chapter or Title immediately. Continue to press the ▲▼ buttons until your choice is inside the blue field.

REPEAT button again, press the ▲▼ buttons to select Off, and then press the E button.

button on the remote control.

Repeat A-B.

The screen may not display Repeat A-B immediately. Continue to press the ▲▼ buttons until Repeat A-B is inside the blue field.

Press the E button at the point where you want repeat play to start (A). Press the E button at the point where you want repeat play to stop (B).

REPEAT button again.

You must set point (B) at least 5 seconds of playing time after point (A).

DISC MENU

During playback, press this button to display the Disc menu.

During playback, press this button to

TITLE MENU

display the Title menu.

• If your disc has a playlist, press the

GREEN (B) button to go to the playlist.

POPUP MENU

DISC MENU or TITLE MENU



Playback related buttons

During playback, press this button to display the Pop-up menu.

During playback, press this button to display the title list.

The product does not play sound in Search, Slow, or Step mode.

6 5 7

Starts playback.

Stops playback.

Pauses playback.

During playback, press the 3 or 

Fast Motion Play

button. Each time you press the 3 or  button, the playback speed will change.

Slow Motion Play

Step Motion Play

In pause mode, press the  button. Each time you press the  button, the playback speed will change.

In pause mode, press the 7 button. Each time you press the 7 button, a new frame appears.

During playback, press the 1 or 2

Skip Motion Play

button. Each time you press 1 or 2 button, the disc moves to the previous or next chapter or file.

HT-E3500_XY_0229.indd 34HT-E3500_XY_0229.indd 34 2012-02-29 오후 3:36:442012-02-29 오후 3:36:44

Page 35

Using the TOOLS Menu

During playback, press the TOOLS button.

Menu that appears only when a BD/DVD

disc plays

05 Media Play

Title

Playing Time

Full Screen

Picture Setting

If the movie or video have more than one title, move to or select a desired title.

Select to move to the specific playback point. Use the numeric buttons to input the playback point.

Select to set the desired full screen size. You can select Original, Mode1 (larger), and Mode2 (largest).

Select to set the picture mode.

- Picture Mode

▪ Normal : Choose this setting for

most viewing applications.

▪ Movie : This is the best setting

for watching movies.

▪ User : Lets you adjust the

sharpness and noise reduction function respectively.

▪ Dynamic : Choose this setting to

increase Sharpness.

Chapter

Repeat Mode

Audio

Subtitle

Angle

BONUSVIEW Video / BONUSVIEW Audio

(BD disc only)

| NOTE |

Depending on the disc or storage device, the Tools menu

may differ. All options may not be displayed.

Select to move to a chapter that you desire to watch.

Select to repeat a specific title, chapter or marked section. Works the same as the REPEAT button. See page 34.

Select to set the desired audio language.

Select to set the desired subtitle language.

- You can also operate this function by

pressing the SUBTITLE button on the remote control.

To view a scene from another angle. The Angle option displays the number of angles available to view (1/1, 1/2, 1/3, etc.).

Select to set the desired bonusview option.

Creating a Video Playlist

You can create a playlist of video files in a way that is nearly identical to the way you create a playlist of music files. For instructions, see "Creating a Music Playlist" on page 36.

English 35

HT-E3500_XY_0229.indd 35HT-E3500_XY_0229.indd 35 2012-02-29 오후 3:36:482012-02-29 오후 3:36:48

Page 36

Media Play

DISC MENU TITLE MENU

POPUP

TRACK

002

Controlling Music Playback

You can control the playback of music content located on DVDs, CDs, and USB storage devices.

Buttons on the Remote Control used for Music Playback

Fast Play (Audio CD (CD-DA) only)

During playback, press the 3 or  button.

Each time you press the 3 or  button, the playback speed will change.

button : Pause a track.

button : Plays the currently selected track.

button : Stops a track.

Skip : During playback, press the 1 or 2 button

to move to the previous or next music of listed.

NUMBER buttons : During Playlist playback, press the desired track number. The selected track is

played.

Creating a Music Playlist

1 · If playing music from a commercial CD or

DVD, press the The Music List Screen appears. If you are creating a playlist from music on a user created disk or USB device, access the Music list as described in "Playing Files on a USB Device" on page 32 or "Playing a Disc with User Recorded Content" on page 33.

2 · Press the ▲▼◄► buttons to move to the

desired file, and then press the YELLOW (C) button to select it. Repeat this procedure to select additional files.

Music TRACK 002 2 files selected 1/2 Page

TRACK 001