Samsung HT-D4500 User Manual

HT-D4500 HT-D4550

5.1CH Blu-ray™

Home Entertainment System

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

HT-D4500_ELS_0609.indd 1HT-D4500_ELS_0609.indd 1 2011-06-09  2:24:152011-06-09  2:24:15

Safety Information

Safety Warnings

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury.

CAUTION :

SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

WARNING

To reduce the risk of ﬁ re or electric shock, do

•

not expose this appliance to rain or moisture.

CAUTION

Apparatus shall not be exposed to dripping or splashing

•

and no objects ﬁ lled with liquids, such as vases, shall be placed on the apparatus.

The Mains plug is used as a disconnect device and shall

•

stay readily operable at any time. This apparatus shall always be connected to an AC outlet

•

with a protective grounding connection.

•

To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

TO PREVENT ELECTRIC

CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LÁSER CLASE 1

CLASS 1 LASER PRODUCT

This Compact Disc player is classiﬁ ed as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those speciﬁ ed herein may result in hazardous radiation exposure.

CAUTION

INVISIBLE LASER RADIATION WHEN OPEN AND

•

INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.

This symbol indicates important instructions accompanying the product.

Wiring the Main Power Supply Plug (UK Only)

IMPORTANT NOTICE

The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must be used. Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required, it must be of the same colour as the fuse fitted in the plug. Replacement covers are available from your dealer. If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance. However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord. Never attempt to insert bare wires directly into a mains socket. A plug and fuse must be used at all times.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:– BLUE = NEUTRAL BROWN = LIVE As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows:–The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.

WARNING :

DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH LETTER E OR

BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.

2 English

HT-D4500_ELS_0609.indd 2HT-D4500_ELS_0609.indd 2 2011-06-09  2:24:372011-06-09  2:24:37

Precautions

Ensure that the AC power supply in your house complies with the identiﬁ cation sticker located on the back

•

of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation

•

(7.5~10cm). Do not place the product on ampliﬁ ers or other equipment which may become hot.

•

Make sure the ventilation slots are not covered. Do not stack anything on top of the product.

•

Before moving the product, ensure the Disc Insert Hole is empty.

•

To disconnect the product completely from the power supply, remove the mains plug from the wall outlet.

•

- If you leave the product unused for a long period of time, disconnect the plug from the wall outlet. During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could

•

damage the product. Do not expose the product to direct sunlight or other heat sources. This could lead to overheating and

•

malfunction of the product. Protect the product from moisture, excess heat, and equipment creating strong magnetic or electric ﬁ elds

•

(i.e. speakers.). Disconnect the power cable from the AC supply if the product malfunctions.

•

Your product is not intended for industrial use. Use of this product is for personal use only.

•

Condensation may occur if you store your product or a disc in cold temperatures. If transporting the

•

product during the winter, wait approximately 2 hours until the product has reached room temperature before using. The batteries used with this product contain chemicals that are harmful to the environment.

•

Do not dispose of batteries in the general household trash.

English 3

HT-D4500_ELS_0609.indd 3HT-D4500_ELS_0609.indd 3 2011-06-09  2:24:382011-06-09  2:24:38

Safety Information

Cautions on Handling and Storing Discs

Small scratches on the disc may reduce sound and picture quality or cause skipping.

Be especially careful not to scratch discs when handling them.

Holding discs

Do not touch the playback side of the disc.

•

Hold the disc by the edges so that

•

ﬁ ngerprints will not get on the surface. Do not stick paper or tape on the disc.

•

Disc Storage

Do not keep in direct sunlight

•

Keep in a cool ventilated area

•

Keep in a clean Protection jacket.

•

Store vertically.

NOTE

✎

Do not allow the discs to become contaminated with



dirt. Do not load cracked or scratched discs.



Handling and Storing Discs

If you get fingerprints or dirt on the disc, clean it with a mild detergent diluted in water and wipe with a soft cloth.

When cleaning, wipe gently from the inside to

•

the outside of the disc

NOTE

✎

Condensation may form if warm air comes into



contact with cold parts inside the product. When condensation forms inside the product, it may not operate correctly. If this occurs, remove the disc and let the product stand for 1 or 2 hours with the power on.

Dolby and the double-D symbol are registered trademarks of Dolby

•

Laboratories. "ABOUT DIVX VIDEO: DivX® is a digital video format

•

created by DivX, Inc. This is an ofﬁ cial DivX Certiﬁ ed® device that plays DivX video. Visit www.divx.com for more information and software tools to convert your ﬁ les into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certiﬁ ed® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.

DivX Certiﬁ ed® to play DivX® video up to HD 1080p, including premium content. DivX®, DivX Certiﬁ ed® and associated logos are trademarks of DivX, Inc. and are used under licence."

Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274

•

HDMI, the HDMI Logo, and High-Deﬁ nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

•

Oracle and Java are registered trademarks of Oracle and/or its afﬁ liates. Other names may be trademarks of their respective owners.

•

This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.

•

Blu-ray Disc™, Blu-ray™, and the logos are trademarks of Blu-ray Disc Association.

•

iPod is a trademark of Apple Inc., registered in the U.S. and other countries. iPhone is a trademark of Apple Inc.

< Open Source Licence Notice >

•

In the case of using open source software, Open Source Licenses are available on the product menu.

Licence

4 English

HT-D4500_ELS_0609.indd 4HT-D4500_ELS_0609.indd 4 2011-06-09  2:24:382011-06-09  2:24:38

Contents

SAFETY INFORMATION

GETTING STARTED

CONNECTIONS

SETUP

2 Safety Warnings 3 Precautions 4 Cautions on Handling and Storing Discs 4 Licence 4 Copyright

7 Icons that will be used in manual 8 Disc Types and Characteristics 12 Accessories 13 Description 13 Front Panel 14 Rear Panel 15 Remote Control

17 Connecting the Speakers 20 Connecting the Video Out to your TV 22 Connecting Audio from External Components 23 Connecting to the Network 24 Connecting the FM Antenna

25 Initial Settings 26 Accessing the Settings Menu 27 Display 27 TV Aspect 27 Smart Hub Screen Size 27 BD Wise (Samsung Products only) 27 Resolution 29 HDMI Colour Format 29 Movie Frame (24 Fs) 29 HDMI Deep Colour 29 Still Mode 29 Progressive Mode 30 Audio 30 Speaker Settings 31 User EQ 31 HDMI Audio 31 Audio Return Channel 31 Digital Output 32 Dynamic Range Control 33 Audio Sync 33 Network 33 Network Settings 36 Network Status 36 BD-LIVE Internet Connection 36 System 36 Initial Settings 37 Anynet+ (HDMI-CEC) 37 BD Data Management 37 Time Zone 37 DivX® Video On Demand 37 Reset 38 Language

ENGLISH

English 5

HT-D4500_ELS_0609.indd 5HT-D4500_ELS_0609.indd 5 2011-06-09  2:24:382011-06-09  2:24:38

Contents

SETUP

BASIC FUNCTIONS

NETWORK SERVICES

OTHER INFORMATION

38 Security 38 BD Parental Rating 38 DVD Parental Rating 38 Change Password 38 General 38 Front Display 38 Network Remote Control 39 Support 39 Software Upgrade 40 Contact Samsung

41 Playing a Disc 41 Using the Disc menu / Title menu / Popup menu 42 Playing the Title List 42 Using the Search and Skip Functions 43 Slow Motion Play/Step Motion Play 43 Repeat Playback 44 Using the TOOLS button 46 Listening to Music 48 Sound Mode 49 Playing back a Picture 50 Playing back a USB Storage Device 51 Listening to Radio 53 Connecting iPod/iPhone Using the USB Cable 53 iPod/iPhone Models You Can Use with This Product

54 Using Smart Hub 61 Samsung Apps 63 Using vTuner Function 63 BD-LIVE™ 63 Using the AllShare Function

64 Troubleshooting 67 Speciﬁ cations

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product

• appearance.

An administration fee may be charged if either

•

an engineer is called out at your request and there is no defect in the product

(i.e. where you have failed to read this user manual) you bring the unit to a repair centre and there is no defect in the product

(i.e. where you have failed to read this user manual).

The amount of such administration charge will be advised to you before any work or home visit is carried out.

•

6 English

HT-D4500_ELS_0609.indd 6HT-D4500_ELS_0609.indd 6 2011-06-09  2:24:382011-06-09  2:24:38

Getting Started

Icons that will be used in manual

Make sure to check the following terms before reading the user manual.

Term Logo Icon Definition

01 Getting Started

BD-ROM

BD-RE/-R

DVD-VIDEO

DVD-RW(V)

DVD-R

DVD+RW

DVD+R

Audio CD

MP3

WMA

JPEG

DivX MKV MP4

USB storage

device

CAUTION

NOTE

Shortcut Key

DivX

h z Z

o w G

This involves a function available on a BD-ROM.

This involves a function available on a BD-RE/-R disc recorded in the BD-RE format.

This involves a function available on a DVD-VIDEO.

This involves a function available on recorded DVD+RW or DVD-RW(V)/ DVD-R/+R discs that have been recorded and ﬁ nalized.

This involves a function available on an audio CD-RW/-R (CD-DA format).

This involves a function available in a CD-RW/-R, DVD-RW/-R disc or a USB storage media containing MP3 or WMA contents.

This involves a function available in a CD-RW/-R, DVD-RW/-R disc or a USB storage media containing JPEG contents.

This involves a function available in a CD-RW/-R, DVD-RW/-R disc or a USB storage media containing DivX contents.

This involves a function available on a USB storage device.

This involves a situation where a function does not operate or settings may

be cancelled.

This involves tips or instructions on the page that help each function

✎

operate.

This function provides direct and easy access pressing the button on the remote control.

This product is compatible with the PAL colour system only.

•

NTSC discs will not play.

•

English 7

HT-D4500_ELS_0609.indd 7HT-D4500_ELS_0609.indd 7 2011-06-09  2:24:382011-06-09  2:24:38

Getting Started

Disc Types and Characteristics

Blu-ray Disc Compatibility

Blu-ray is a new and evolving format. Accordingly, disc compatibility issues are possible. Not all discs are compatible and not every disc will play back. For additional information, refer to the Disc Types and Characteristics section of this Manual.

NOTE

✎

Playback may not work for some types of discs, or



when speciﬁ c operations, such as angle change and aspect ratio adjustment, are being performed. Information about the discs is written in detail on the box. Please refer to this if necessary. Do not allow the disc to become dirty or scratched.



Fingerprints, dirt, dust, scratches or deposits of cigarette smoke on the recording surface may make it impossible to use the disc for playback. When a BD-Java title is played, loading may take



longer than a normal title, or some functions may perform slowly.

Discs that cannot be played

HD DVD Disc

•

DVD-RAM

•

3.9 GB DVD-R Disc for Authoring.

•

DVD-RW(VR mode)

•

Super Audio CD(except CD layer)

•

DVD-ROM/PD/MV-Disc, etc CVD/CD-ROM/

•

CDV/CD-G/CD-I/LD CDGs play audio only, not graphics.

•

Logos of Discs that can be played

Blu-ray Disc Dolby Digital Plus

PAL broadcast system in

U.K, France, Germany, etc.

DTS-HD High Resolution

Audio

DTS-HD Master Audio |

Essential

Dolby TrueHD

Java

BD-LIVE

NOTE

✎

Some commercial discs and DVD discs purchased



outside your region may not be playable with this product. If a DVD-R/-RW disc has not been recorded properly



in DVD video format, it will not be playable.

8 English

HT-D4500_ELS_0609.indd 8HT-D4500_ELS_0609.indd 8 2011-06-09  2:24:392011-06-09  2:24:39

01 Getting Started

Region Code

Both the product and the discs are coded by region. These regional codes must match in order to play the disc. If the codes do not match, the disc will not play.

Disc Type

Blu-ray

DVD-VIDEO

Region

Code

North America, Central America, South America, Korea, Japan,

Taiwan, Hong Kong and South East Asia.

Europe, Greenland, French territories, Middle East, Africa,

Australia and New Zealand.

India, China, Russia, Central and

South Asia.

The U.S., U.S. territories and

Canada

Europe, Japan, the Middle East,

Egypt, South Africa, Greenland

Taiwan, Korea, the Philippines,

Indonesia, Hong Kong

Mexico, South America, Central America, Australia, New Zealand,

Paciﬁ c Islands, Caribbean

Russia, Eastern Europe, India, most of Africa, North Korea,

Mongolia

China

Area

Disc Types

BD-ROM

This Blu-ray disc can only be played back. This product can play back pre-recorded commercial BD-ROM discs.

BD-RE/-R

This Blu-ray disc can be recorded and played back. This product can play back a BD-RE/-R disc recorded by other compatible Blu-ray disc recorders.

DVD-VIDEO

This product can play back pre-recorded commercial

•

DVD discs (DVD-VIDEO discs) with movies. When switching from the ﬁ rst layer to the second

•

layer of a dual-layered DVD-VIDEO disc, there may be momentary distortion in the image and

product

sound. This is not a malfunction of the

DVD-RW/-R/+R

This

product recorded and ﬁ nalized with a DVD video recorder. Ability to play back may depend on recording conditions.

DVD+RW

•

This product can play back a DVD+RW disc recorded with a DVD Video recorder. Ability to play back may depend on recording conditions.

Audio CD (CD-DA)

•

This CD-RW/-R discs.

•

The product may not be able to play some CDRW/-R discs due to the condition of the recording.

CD-RW/-R

•

Use a 700MB(80 minutes) CD-RW/-R disc. If possible, do not use a 800MB(90 minutes) or above disc, as the disc may not play back.

If the CD-RW/-R disc was not recorded as a

•

closed session, you may experience delays when playing back the beginning of the disc or all recorded ﬁ les may not play.

•

Some CD-RW/-R discs may not be playable with this product, depending on the device which was used to burn them. For contents recorded on CDRW/-R media from CDs for your personal use, playability may vary depending on contents and discs.

can play back a DVD-RW/-R/+R disc

product

can play back CD-DA format audio

English 9

HT-D4500_ELS_0609.indd 9HT-D4500_ELS_0609.indd 9 2011-06-09  2:24:402011-06-09  2:24:40

Getting Started

Disc Format

Using JPEG disc

CD-R/-RW, DVD-RW/-R recorded with UDF or JOLIET format can be played back.

•

Only JPEG ﬁ les with the ".jpg", ".JPG", ".jpeg" or "JPEG" extension can be displayed.

•

Progressive JPEG is supported.

•

DVD-RW/-R (V)

•

This is a format that is used for recording data on a DVD-RW or DVD-R disc. The disc can be played by this product once it has been ﬁ nalized.

•

If a disc that has been recorded in Video Mode by a different maker’s recorder but has not been ﬁ nalized, it cannot be played by this product.

Supported File Formats

Video File Support

File Extension Container Video Codec Audio Codec Resolution

1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080

1920x1080 1920x1080 1920x1080

1920x1080

*.avi

*.mkv

*.asf

*.wmv

*.mp4

*.3gp

DivX 3.11/4.x/5.1/6.0

XviD

AVI

MKV

ASF

ASF Window Media Video v9

MP4

3GPP

H.264 BP/MP/HP

MPEG4 SP/ASP

Motion JPEG

DivX 3.11/4.x/5.1/6.0

XviD

H.264 BP/MP/HP

MPEG4 SP/ASP

Motion JPEG

DivX 3.11/4.x/5.1/6.0

XviD

H.264 BP/MP/HP

MPEG4 SP/ASP

Motion JPEG

H.264 BP/MP/HP

MPEG4 SP/ASP

XVID

H.264 BP/MP/HP

MPEG4 SP/ASP

MP3 AC3

LPCM

ADPCM

DTS Core

MP3 AC3

LPCM

ADPCM

DTS Core

MP3 AC3

LPCM

ADPCM

WMA

WMA 1920x1080

MP3

ADPCM

AAC

ADPCM

AAC

HE-AAC

10 English

HT-D4500_ELS_0609.indd 10HT-D4500_ELS_0609.indd 10 2011-06-09  2:24:412011-06-09  2:24:41

File Extension Container Video Codec Audio Codec Resolution

*.vro

*.mpg

*.mpeg

*.ts

*.tp

*.trp

VRO VOB

MPEG2

MPEG1

MPEG1 MPEG2

H.264

MPEG2

H.264

VC1

AC3 MPEG LPCM

AAC

AC3

AAC

MP3 DD+

HE-AAC

1920x1080

352x288

1920x1080

1920x1080 1920x1080

1920x1080

Restrictions

Some of the Codecs above listed are not supported if having a problem with the contents.

• Video source with incorrect container information or if corrupt will not be played properly.

• AV source with more than the standard bit rate or frame rate may not be played properly.

• If the index table is corrupt, the Seek (Jump) function will not be supported.

• If you play a video via the network, it may not be played properly depending on the network status.

•

Video decoder

Up to H.264 Level 4.1 supported.

• H.264 FMO/ASO/RS, VC1 SP/MP/AP L4, AVCHD not supported.

• XVID, MPEG4 SP, ASP :

•

- Below 1280 x 720: 60 frame max

- Above 1280 x 720: 30 frame max GMC 2 or higher not supported.

•

01 Getting Started

Audio decoder

Up to WMA 7,8,9 supported.

• WMA 9 PRO with more than two channels (multi-channel) not supported.

• WMA 9 Lossless, Voice not supported.

• WMA sampling rate at 22050Hz mono not supported.

•

Music File Support

File Extension Container Audio Codec Support Range

*.mp3

*.wma

MP3

WMA

MP3 -

Compliant with WMA version 10

WMA

* Sampling rates (in kHz) - 8, 11, 16, 22, 32,

44.1, 48

* Bit rates - All bit-rates in the range 5kbps to

384kbps

English 11

HT-D4500_ELS_0609.indd 11HT-D4500_ELS_0609.indd 11 2011-06-09  2:24:412011-06-09  2:24:41

Getting Started

Notes on USB connection

Supported devices:

USB storage media, MP3 player, digital camera, USB card reader

Does not support if a folder or ﬁ le name is longer than 125 characters.

A subtitle ﬁ le bigger than 300 KB may not be properly displayed.

A certain USB/digital camera device may not be compatible with the product.

FAT16 and FAT32 ﬁ le systems are supported.

Photo (JPEG), music (MP3) and video ﬁ le should have their names in Korean or English. Otherwise, the ﬁ le may not played.

Accessories

Check for the supplied accessories below.

Connect directly to the product's USB port.

6) Connecting through another cable may raise problems with USB compatibility.

Inserting more than one memory device to a

7) multi-card reader may not operate properly.

PTP protocol for digital camera is not

8) supported.

Do not disconnect USB device during a

9) "loading" process.

Bigger the image resolution, the longer the

10)

delay to displaying.

DRM applied MP3 ﬁ les downloaded from a

11)

commercial site are not played back.

FUNCTION

POWER

TV SOURCE

RECEIVER SLEEP

TARDS DISPLAY

123

PTY- PTY SEARCH PTY+

456

7809

REPEATFULL SCREEN

MUTE

TUNING

VOL

/CH

SFE MODE

DISC MENU MENU TITLE MENU

POPUP

TOOLS

INFO

RETURN

EXIT

TUNER MEMORY

S/W LEVEL

SMART SEARCH

DSP

HUB

MO/ST

vTuner

Video Cable FM Antenna User's Manual

Remote Control/

Batteries (AAA size)

12 English

HT-D4500_ELS_0609.indd 12HT-D4500_ELS_0609.indd 12 2011-06-09  2:24:412011-06-09  2:24:41

Front Panel

01 Getting Started

Description

1 3 4

REMOTE CONTROL SENSOR

DISC TRAY

DISPLAY

OPEN/CLOSE BUTTON

FUNCTION BUTTON

STOP BUTTON

PLAY/PAUSE BUTTON

ENTER BUTTON

8 9

POWER BUTTON ( )

VOLUME CONTROL

USB PORT

2 5 6 7 899 10

Detects signals from the remote control.

Opens to accept a disc.

Displays the playing status, time, etc.

Opens and closes the disc tray. The mode switches as follows :

BD/DVD  D. IN  AUX  R. IPOD  FM Stops disc playback.

Plays a disc or pauses playback.

Selects menu items or starts a Blu-ray disc. (It will not start a DVD disc.)

Turns the product on and off.

Volume adjustment. You can connect a USB memory ﬂ ash stick here and use it as storage when the product is

connected to BD-LIVE. You can also use the USB Host for software upgrades and MP3/JPEG/ DivX/MKV/MP4 playback. And also it is possible to use R. IPOD when iPod is connected.

NOTE

✎

You can perform software upgrades using the USB Host jack with a USB memory ﬂ ash stick only.



When the product displays the Blu-ray disc menu, you cannot start the movie by pressing the PLAY button on the



product or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the ENTER button.

English 13

HT-D4500_ELS_0609.indd 13HT-D4500_ELS_0609.indd 13 2011-06-09  2:24:422011-06-09  2:24:42

Getting Started

Rear Panel

COOLING FAN

5.1 CHANNEL SPEAKER OUTPUT

CONNECTORS EXTERNAL DIGITAL AUDIO IN JACK

(OPTICAL)

WIRELESS LAN JACK

LAN TERMINAL

AUX IN JACKS

COMPONENT VIDEO OUT JACKS

VIDEO OUT JACK

HDMI OUT JACK

FM ANTENNA JACK

1 72 6 94

SPEAKERS OUT

CENTER FRONT

SUBWOOFER FRONT

SPEAKER IMPEDANCE : 3

SURROUND

DIGITAL

AUDIO IN

OPTICAL

The cooling fan supplies cool air to the product to prevent overheating and always revolves when the power is on.

Connect the front, centre, surround, subwoofer speakers.

Use this to connect external equipment capable of digital output.

Can be used for network based services (see pages 54~63), BD-LIVE and software upgrade with a wireless LAN adapter.

Can be used for network based services (see pages 54~63), BD-LIVE and software upgrade under the network connection.

Connect to the 2CH analogue output of an external device (such as a VCR)

Connect a TV with Component video inputs to these jacks.

Connect your TV's Video Input jack (VIDEO IN) to the VIDEO OUT Jack on this product.

Use an HDMI cable, connect this HDMI output terminal to the HDMI input terminal on your TV for the best quality picture.

Connect the FM antenna.

LAN

WIRELESS LAN

5V 350mA

COMPONENT OUT

AUX IN

VIDEO OUT

853

FM ANT

HDMI OUT

CAUTION

Ensure a minimum of 10 cm of clear space on all sides of the cooling fan when installing the product.



Do not obstruct the cooling fan or ventilation holes.



14 English

HT-D4500_ELS_0609.indd 14HT-D4500_ELS_0609.indd 14 2011-06-09  2:24:422011-06-09  2:24:42

Tour of the Remote Control

01 Getting Started

Remote Control

Turn the product on and off.

If you want to change to TV mode,

press the TV button.

If you want to change to Home Cinema,

press the BD button.

Press numeric buttons to operate options.

Press this to see the full screen on a TV.

Press to skip backwards or forwards.

Press to stop/play a disc.

Cut off the sound temporarily.

Adjust the volume.

Press this to move to the home menu.

Press to view the disc menu.

Press this to use the Tools menu.

Select on-screen menu items and

change menu value.

Return to the previous menu.

These buttons are used both for menus

on the product and also several

Blu-ray Disc functions.

Press this to use the Smart Hub.

This button is not available to use.

Press this to search a contents.

Select the desired Dolby Pro

Logic II audio mode.

POWER

RECEIVER SLEEP

BD TV

RDS DISPLAY

FUNCTION

TV SOURCE

1 2 3

PTY+PTY SEARCHPTY-

456

7809

REPEATFULL SCREEN

MUTE

VOL

DISC MENU MENU TITLE MENU

TOOLS

RETURN

HUB

TUNING

SFE MODE

/CH

POPUP

INFO

EXIT

TUNER

MEMORY

S/W LEVEL

MO/ST

vTuner

DSPSMART SEARCH

This is mode selection button. or Press to select TV's video mode.

Set a Sleep time to shut off the product.

To open and close the disc tray.

Use the RDS function to receive FM stations.

Allows you to repeat a title, chapter, track or disc.

Press to search backwards or forwards.

Press to pause a disc.

Search for active FM stations and change channels.

You can set the SFE(Sound Field Effect) mode best suited for the type of music you are listening to.

Use this to enter the popup menu/title menu.

Use this to display the playback information when playing a Blu-ray/DVD disc.

Press this to exit the menu.

Used to set a preset radio frequency.

Regulate and stabilize the volume level. (Digital Signal Processor)

Press this to use the vTuner. Used to adjust the level of the

subwoofer. Select MONO or STEREO for radio

broadcasting.

English 15

HT-D4500_ELS_0609.indd 15HT-D4500_ELS_0609.indd 15 2011-06-09  2:24:432011-06-09  2:24:43

Getting Started

Installing batteries in the Remote Control

* Battery size: AAA

NOTE

✎

Make sure to match the “+” and “–” ends of



the batteries with the diagram inside the compartment.



Assuming typical TV usage, the batteries last for about one year. The remote control can be used up to



approximately 7 meters in a straight line.

Setting the Remote Control

You can control certain functions of your TV with this remote control.

When operating a TV with the remote control

Press the TV button to set the remote control

to TV mode.

Press the POWER button to turn on the TV.

While holding down the POWER button, enter the code corresponding to your brand of TV.

•

If there is more than one code listed for your TV in the table, enter one at a time to determine which code works.

•

Example : For a Samsung TV

While holding down the POWER button, use the number buttons to enter 00, 15, 16, 17 and 40.

If the TV turns off, the setting is complete.

You can use the TV POWER, VOLUME,

•

CHANNEL, and Numeric buttons (0~9).

NOTE

✎

The remote control may not work on some



brands of TV's. Also, some operations may not be possible, depending on your brand of TV.



The remote control will work with Samsung TVs by default.

TV Brand Code List

Brand Code

Admiral

(M.Wards)

A Mark

Anam

AOC

Bell & Howell

(M.Wards)

Brocsonic

Candle

Cetronic

Citizen Cinema Classic

Concerto

Contec

Coronado

Craig

Croslex

Crown

Curtis

Mates

CXC

Daewoo

Daytron Dynasty

Emerson

Fisher

Funai

Futuretech

General

Electric (GE)

Hall Mark

Hitachi

Inkel

JC Penny

JVC

KTV KEC KMC

(Goldstar)

Luxman

LXI

(Sears)

Magnavox

Marantz

Matsui

MGA

56, 57, 58

01, 15

01, 02, 03, 04, 05, 06, 07, 08, 09, 10,

11, 12, 13, 14

01, 18, 40, 48

57, 58, 81

59, 60

18 03

03, 18, 25

97 03 18 46 15

03, 05, 61, 82, 83, 84

62 03

59, 61, 63

02, 03, 04, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32,

34, 35, 36, 48, 59, 90

40 03

03, 15, 40, 46, 59, 61,

64, 82, 83, 84, 85

19, 65

03 03

06, 40, 56, 59,

66, 67, 68

15, 18, 50, 59, 69

56, 59, 67, 86

59, 61, 87, 88

03, 15, 40

01, 15, 16, 17, 37, 38, 39, 40, 41, 42, 43, 44

19, 54, 56, 59,

60, 62, 63, 65, 71

15, 17, 18, 48, 54, 59, 60, 62, 72, 89

40, 54

18, 40

Brand Code

Mitsubishi/

MGA MTC NEC Nikei

Onking

Onwa

Panasonic

Penney

Philco

Philips

Pioneer

Portland

Proton Quasar

Radio Shack

RCA/

Proscan Realistic

Sampo

Samsung

Sanyo Scott Sears Sharp

Signature

2000

(M.Wards)

Sony

Soundesign Spectricon

SSS

Sylvania

Symphonic

Tatung

Techwood

Teknika

TMK

Toshiba

Vidtech

Videch

Wards

Yamaha

York

Yupiteru

Zenith Zonda

Dongyang

18, 40, 59, 60, 75

18, 19, 20, 40, 59, 60

06, 07, 08, 09, 54,

66, 67, 73, 74

03, 15, 17, 18, 48, 54, 59, 62, 69, 90

15, 17, 18, 40,

48, 54, 62, 72 63, 66, 80, 91

15, 18, 59

06, 66, 67

17, 48, 56, 60,

61, 75

18, 59, 67, 76, 77,

78, 92, 93, 94

03, 19

00, 15, 16, 17, 40, 43, 46, 47, 48, 49,

59, 60, 98

19, 61, 65

03, 40, 60, 61

15, 18, 19 15, 57, 64

57, 58

50, 51, 52, 53, 55

03, 40

18, 40, 48, 54,

59, 60, 62 61, 95, 96

03, 15, 18, 25

18, 40

19, 57, 63, 71

59, 60, 69

15, 17, 18, 40,

48, 54, 60, 64

58, 79

03, 54

03 03 03

01 18

06 18

18 40 03

16 English

HT-D4500_ELS_0609.indd 16HT-D4500_ELS_0609.indd 16 2011-06-09  2:24:432011-06-09  2:24:43

02 Connections

Connections

This section involves various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

Connecting the Speakers

Position of the product

Place it on a stand or cabinet shelf, or under the TV stand.

Selecting the Listening Position

The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV. Example : For 32" TV's 2~2.4m

For 55" TV's 3.5~4m

Front Speakers

Centre Speaker

Surround Speakershj

Place these speakers in front of your listening position, facing inwards (about 45°) toward you. Place the speakers so that their tweeters will be at the same height as your ear. Align the front face of the front speakers with the front face of the centre speaker or place them slightly in front of the centre speakers.

It is best to install it at the same height as the front speakers. You can also install it directly over or under the TV.

Place these speakers to the side of your listening position. If there isn't enough room, place these speakers so they face each other. Place them about 60 to 90cm above your ear, facing slightly downward.

Unlike the front and centre speakers, the surround speakers are used to

handle mainly sound effects and sound will not come from them all the time.

Nizkotonski zvočnik

CAUTION

Do not let children play with or near the speakers. They could get hurt if a speaker falls.



When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct.



Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their



hands or alien substances into the duct (hole) of the subwoofer speaker. Do not hang the subwoofer on the wall through the duct (hole).



NOTE

✎

If you place a speaker near your TV set, screen colour may be distorted because of the magnetic ﬁ eld



generated by the speaker. If this occurs, place the speaker away from your TV set.

HT-D4500_ELS_0609.indd 17HT-D4500_ELS_0609.indd 17 2011-06-09  2:24:442011-06-09  2:24:44

The position of the subwoofer is not so critical. Place it anywhere you like.

English 17

Connections

Speaker Components

HT-D4500

(L) (R)

FRONT

SURROUND

CENTRE

SUBWOOFER

Speaker Components Assembled Speakers

HT-D4550 HT-D4550

(L) (R)

FRONT

(L) (R)

STAND

CENTRE

SUBWOOFERSURROUND

SCREW (5X15): 4EA

SCREW (4X20): 16EA

SPEAKER CABLE

STAND BASE



FRONT

SPEAKER

SURROUND

SPEAKER

Installing the Speakers on the Tallboy Stand

HT-D4550 only

Turn the Stand Base upside-down and connect it to

the Stand. Insert small screws (4x20, For connecting Stand &

Stand Base) clockwise into the four holes marked using a screwdriver as shown in the illustration.

CAUTION

When you use a torque screwdriver, be careful not to



put excessive force. Otherwise, it runs idle or can be damaged. (torque screwdriver- below 15 kg.f.cm)

Connect the upper Speaker to the assembled Stand. Insert another large screw (5x15, For connecting

Speaker & Stand) clockwise into the hole on the rear of the speaker using a screwdriver.

This is the appearance after the speaker is installed.

Follow this steps to install other speaker.

Stand Base

Stand

Speaker

Stand

CENTRE

SPEAKER

SUBWOOFER

18 English

HT-D4500_ELS_0609.indd 18HT-D4500_ELS_0609.indd 18 2011-06-09  2:24:442011-06-09  2:24:44

Connecting The Speakers

SPEAKERS OUT

SPEAKER IMPEDANCE : 3

SUBWOOFER FRONT

SURROUND

CENTER FRONT

SURROUND

SPEAKERS OUT

SPEAKER IMPEDANCE : 3

SUBWOOFER SURROUND

CENTER SURROUNDFRONT

FRONT

SPEAKERS OUT

SPEAKER IMPEDANCE : 3

SUBWOOFER FRONT

SURROUND

CENTER FRONT

SURROUND

SPEAKERS OUT

SPEAKER IMPEDANCE : 3

SUBWOOFER SURROUND

CENTER SURROUNDFRONT

FRONT

Connect the connecting plugs to the back of the product by matching the colours of the speaker

plugs to the speaker jacks.

HT-D4500

02 Connections

Front Speaker (L)

Surround Speaker (L)

Centre Speaker

Subwoofer

Press down the terminal tab on the back of the speaker.

Insert the black wire into the black terminal (–) and the red wire into the

Surround Speaker (R)

red terminal (+), and then release the tab.

Connect the connecting plugs to the back of the product by matching the colours of the speaker plugs to the speaker jacks.

HT-D4550

Front Speaker (L) Surround Speaker (L)

Front Speaker (R)

Black

Front Speaker (R)

Red

HT-D4500_ELS_0609.indd 19HT-D4500_ELS_0609.indd 19 2011-06-09  2:24:592011-06-09  2:24:59

Centre Speaker

Subwoofer

Surround Speaker (R)

English 19

Connections

WIRELESS LAN

5V 350mA

LAN

HDMI OUT

OPTICAL

DIGITAL AUDIO IN

FM ANT

COMPONENT OUT

VIDEO OUT

AUX IN

DIG

FM ANT

AUX IN

Connecting the Video Out to your TV

Choose one of the three methods for connecting to a TV.

METHOD 1

AUDIO IN

ITAL

COMPONENT OU

VIDEO OUT

HDMI OUT

HDMI IN

METHOD 1 : HDMI (BEST QUALITY)

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.

NOTE

✎

Certain HDMI output resolutions may not work, depending on your TV.

 

After making the video connection, set the Video input source on your TV to match the corresponding Video output (HDMI, Component or Composite) on your product. See your TV owner's manual for more information on how to select the TV's Video Input source.



If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control and select HDMI as the external source of the TV.

HDMI Auto Detection Function

Using an HDMI cable, connect the HDMI OUT terminal on the rear of the product to the HDMI IN

terminal of your TV. Turn on the product and TV.

For available HDMI video resolutions, see page 27.

This function is not available if the HDMI cable does not support CEC.

•

HDMI is an interface that enables the digital transmission of video and audio data with just a single

•

connector. Using HDMI, the product transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack.

HDMI connection description

•

- HDMI outputs only a pure digital signal to the TV.

- If your TV does not support HDCP, random noise appears on the screen.

What is the HDCP?

•

HDCP (High-band width Digital Content Protection) is a system for preventing BD/DVD content outputted via HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being made.

20 English

HT-D4500_ELS_0609.indd 20HT-D4500_ELS_0609.indd 20 2011-06-09  2:25:002011-06-09  2:25:00

HDMI OUT

FM ANT

COMPONENT OUT

VIDEO OUT

AUX IN

Green

Blue

Red

METHOD 2

DMI OU

Yellow

AUX I

METHOD 3

METHOD 2: Component Video (BETTER QUALITY)

If your television is equipped with Component Video inputs, connect a Component video cable (not supplied) from the Component Video Output (P Component Video Input Jacks on your TV.

NOTE

✎

You can select from a variety of resolution settings such as 1080i, 720p, 576p/480p and 576i/480i,



depending on the disc type. (See page 27)



The actual resolution may differ from the setting in the Setup menu if both Component and HDMI cables are connected. The resolution may also be different depending on the disc. (See page 27)



If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control and select COMPONENT as the external source of the TV.



In DVD playback, if both HDMI and Component jacks are connected and you select the Component 1080p, 1080i, 720p or 576p/480p mode, the Display Setup menu will show the output resolution as 1080p, 1080i, 720p or 576p/480p in the menu. The resolution is actually 576i/480i.

METHOD 3 : Composite Video

R, PB and Y) Jacks on the back of the product to the

(GOOD QUALITY)

02 Connections

Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN jack on your TV.

NOTE

✎

The VIDEO source is always output in 576i/480i resolution regardless of the resolution set in the Setup



menu. (See page 27)



TV SOURCE

button on

the remote control and select VIDEO as the external source of the TV.

CAUTION

Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by



English 21

HT-D4500_ELS_0609.indd 21HT-D4500_ELS_0609.indd 21 2011-06-09  2:25:022011-06-09  2:25:02

Connections

This system supports Digital sampling frequencies of 32 kHz of higher from external digital components.

WIRELESS LAN

5V 350mA

LAN

E : 3

HDMI OUT

OPTICAL

DIGITAL

AUDIO IN

FM ANT

COMPONENT OUT

VIDEO OUT

AUX IN

Connecting Audio from External Components

COMPONENT OU

DMI OUT

E : 3

IDEO OU

WhiteRed

Optical Cable

(not supplied)

Audio Cable

(not supplied) If the external analogue component has only one Audio Out, connect either

Set-Top Box

OPTICAL

VCR

AUX

left or right.

OPTICAL : Connecting an External Digital Component

Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).

Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital

component. Press the FUNCTION button to select D. IN input.

The mode switches as follows : BD/DVD  D. IN  AUX  R. IPOD  FM

•

NOTE

✎

To see video from your Cable Box/Satellite receiver, you must connect it's video output to a TV.



This system supports Digital sampling frequencies of 32 kHz of higher from external digital components.



This system supports only DTS and Dolby Digital audio, MPEG audio which is bitstream cannot be supported.



AUX : Connecting an External Analogue Component

Analogue signal components such as a VCR.

Connect AUX IN (Audio) on the product to the Audio Out of the external analogue component.

Be sure to match connector colours.

•

Press the FUNCTION button to select AUX input.

The mode switches as follows : BD/DVD  D. IN  AUX  R. IPOD  FM

•

NOTE

✎

You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of



the VCR to this product.

22 English

HT-D4500_ELS_0609.indd 22HT-D4500_ELS_0609.indd 22 2011-06-09  2:25:022011-06-09  2:25:02

Connecting to the Network

AUX IN

This product enables you to view network based services (See pages 54~63) such as Smart Hub and BD-LIVE, as well as receive software upgrades when a network connection is made. We recommend using an Wireless router or IP router for the connection. For more information on router connection, refer to the user manual of the router or contact the router manufacturer for technical assistance.

Cable Network

Using the Direct LAN Cable (UTP cable), connect the LAN terminal of the product to the LAN

1. terminal of your modem.

Set the network options. (See page 33)

COMPONENT OUT

LAN

COMPONENT OU

HDMI OUT

FM ANT

FM AN

02 Connections

WIRELESS LAN

5V 350mA

AUX IN

VIDEO OUT

IDEO OUT

Router

Broadband modem

(with integrated router)

Broadband

service

Broadband modem

Broadband

service

Networking with PC for

AllShare function

(See page 63)

NOTE

✎

Internet access to Samsung’s software update server may not be allowed, depending on the router



you use or the ISP’s policy. For more information, contact your ISP (Internet Service Provider). For DSL users, please use a router to make a network connection.



For the AllShare function, a PC must be connected in the network as shown in the ﬁ gure.



English 23

HT-D4500_ELS_0609.indd 23HT-D4500_ELS_0609.indd 23 2011-06-09  2:25:032011-06-09  2:25:03

Connections

Wireless Network

You can connect to the network with a Wireless IP sharer.

A wireless AP/IP router is required to make a wireless network connection. Connect the wireless

LAN adapter to the Wireless LAN Adapter on the rear panel of the product. Set the network options. (See page 33)

Broadband

service

Wireless IP sharer

LAN

WIRELESS LAN

5V 350mA

COMPONENT OUT

COMPONENT OU

AUX IN

Wireless LAN Adapter (not supplied)

Networking with PC for AllShare function

(See page 63)

NOTE

✎

This product is compatible with only Samsung's Wireless LAN Adapter. (not supplied) (Model name:



WIS09ABGN).

- The Samsung Wireless LAN Adapter is sold separately. Contact a Samsung Electronics retailer for purchasing.



You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of the wireless network.)



Wireless LAN, by its nature, may cause interference, depending on the use condition (AP performance, distance, obstacles, interference by other radio devices, etc).



Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.



When applying the security key for the AP (wireless IP sharer), only the following is supported.

Authentication Mode : WEP, WPAPSK, WPA2PSK

Encryption Type : WEP, AES



For the AllShare function, a PC must be connected in the network as shown in the ﬁ gure.

VIDEO OU

IDEO OU

Connecting the FM Antenna

Connect the FM antenna supplied to the FM ANTENNA

Jack. Slowly move the antenna wire around until you ﬁ nd a

location where reception is good, then fasten it to a wall or other rigid surface.

NOTE

✎

This product does not receive AM broadcasts.



HDMI OUT

DMI OUT

FM Antenna (supplied)

FM ANT

24 English

HT-D4500_ELS_0609.indd 24HT-D4500_ELS_0609.indd 24 2011-06-09  2:25:052011-06-09  2:25:05

Setup

Initial Settings

Turn on your TV after connecting the product.

When you connect and turn on the product to a TV for the ﬁ rst time, the Initial Settings screen appears.

Initial Settings | On-Screen Language

Select a language for the on-screen displays.

Български Hrvatski Čeština Dansk Nederlands English Eesti Suomi Français Deutsch Indonesia Italiano

Press the ▲▼◄► buttons to select the desired language, and then press the ENTER button.

Press the ENTER button to select Start.

Press the ▲▼ buttons to select the desired TV Aspect Ratio, and then press the ENTER button. (See page 27)

Press the ▲▼ buttons to select the desired

Network Settings : Wired, Wireless (General), WPS(PBC) or One Foot Connection, and then press the ENTER

button. If you do not know the details of your Network Settings, press the BLUE (D) button on your remote instead to skip Network Settings here, ﬁ nish the Initial Settings, and go to the Home menu. If you selected a Network Settings, go to pages 33~36 for more information about the Network settings. When done, go to Step 6.

The Home menu appears. (For more

information about the Home menu, please see page 26.)

Ελληνικά Magyar

한국어

Move " Enter

•

Home Menu

My Contents

Videos

Photos

Music

My Devices Internet Settings

Function

d WPS(PBC)

NOTE

✎

The Home menu will not appear if you do not



conﬁ gure the initial settings except as noted below.



If you press the BLUE (D) button during the Network setup, you can access the Home menu even if the network setup is not completed yet.



If you want to display the Initial Setting screen again to make changes, select the Initial Settings. (See page 36)



If you use an HDMI cable to connect the product to an Anynet+(HDMI-CEC)compliant Samsung TV and 1.) You have set the Anynet+(HDMI-CEC) feature to On in both the TV and the product and 2.) You have set the TV to a language supported by the product, the product will select that language as the preferred language automatically.

If you leave the product in the stop mode for



more than 5 minutes without using it, a screen saver will appear on your TV. If the product is left in the screen saver mode for more than 20 minutes, the power will automatically turn off.

03 Setup

English 25

HT-D4500_ELS_0609.indd 25HT-D4500_ELS_0609.indd 25 2011-06-09  2:25:062011-06-09  2:25:06

Setup

TOOLS

POPU

Accessing the Settings Menu

DISC MENU MENU TITLE MENU

DISC MEN

TOOLS

RETURN

MENU Button :

RETURN Button : Return to the previous menu.

ENTER / DIRECTION Button :

Move the cursor or select an item. Activate the currently selected item. Conﬁ rm a setting.

EXIT Button : Press to exit the current menu.

Press to move to the Home menu.

To access the Settings menu and sub-menus, follow these steps:

Press the POWER button. The Home Menu appears.

Home Menu

•

TITLE MEN

POPUP

INFO

NFO

EXIT

Press the ◄► buttons to select Settings,

and then press the ENTER button. Press the ▲▼ buttons to select the desired

submenu, and then press the ENTER button.

Press the ▲▼ buttons to select the desired

item, and then press the ENTER button. Press the EXIT button to exit the menu.

NOTE

✎

When the product is connected to a network,



select Internet from the Home menu. Download the desired content from Samsung Apps. (See pages 61~63)



The access steps may differ depending on the menu you selected.

The OSD (On Screen Display) may change in



this product after you upgrade the software version.

My Contents

Videos

Function

My Devices Internet Settings

Selects My Devices.

Selects Function.

Selects My Contents.

Selects Internet.

Selects Settings.

Displays the buttons available.

Photos

Music

WPS(PBC)

3 4

26 English

HT-D4500_ELS_0609.indd 26HT-D4500_ELS_0609.indd 26 2011-06-09  2:25:082011-06-09  2:25:08

03 Setup

Display

You can conﬁ gure various display options such as the TV Aspect Ratio, Resolution, etc.

TV Aspect

Depending on the type of television you have, you may want to adjust the screen size setting.

16:9 Original : Select when you connect the

•

product to a 16:9 TV screen. The product will display all content in its original aspect ratio. Content formatted in 4:3 will be displayed with black bars on the left and right.

16:9 Full : Select when you connect the product

•

to a 16:9 TV screen. All content will ﬁ ll the full screen. Content formatted in 4:3 will be stretched.

4:3 Letter Box : Select when you connect the

•

product to a 4:3 TV screen. The product will display all content in its original aspect ratio. Content formatted in 16:9 will be displayed with black bars on the top and bottom.

4:3 Pan-Scan : Select when you connect the

•

product to a 4:3 TV screen. 16:9 content will have the extreme left and right portions cut off.

NOTE

✎

Depending on the disc type, some aspect ratios



may not be available.



If you select an aspect ratio and option which is different than the aspect ratio of your TV screen, then the picture might appear to be distorted.



If you select the 16:9 Original, your TV may display 4:3 Pillarbox (black bars on sides of picture).

Smart Hub Screen Size

Set the Smart Hub Screen to the optimal size.

Size 1 : Smart Hub screen size will be smaller

•

than default. You may see some black on sides of screen.

Size 2 : This is the default setting for Smart Hub.

•

The product displays the normal Smart Hub screen size.

Size 3 : This will display a larger Smart Hub

•

screen size. The image may be too large for your TV screen.

BD Wise (Samsung Products only)

BD Wise is Samsung’s latest inter-connectivity feature.

When you connect a Samsung product and a Samsung TV with BD Wise to each other via HDMI, and BD Wise is on in both the product and TV, the product outputs video at the video resolution and frame rate of the BD/DVD disc.

Off : The output resolution stays ﬁ xed at the

•

resolution you set previously in the Resolution menu, regardless of the resolution of the disc. See Resolution below.

•

On : The product outputs video at the original resolution and frame rate of the BD/DVD disc.

NOTE

✎

When BD Wise is on, the Resolution setting



automatically defaults to BD Wise and BD Wise appears in the Resolution menu.



If the product is connected to a device that does not support BD Wise, you can not use the BD Wise function. For proper operation of BD Wise, set the BD



Wise menu of both the product and the TV to On.

Resolution

Lets you set the output resolution of the Component and HDMI video signal to Auto, 1080p, 1080i, 720p, 576p/480p, or 576i/480i. The number indicates the number of lines of video per frame. The i and p indicate interlaced and progressive scan, respectively. The more lines, the higher the quality.

•

Auto : Automatically sets the output resolution to the connected TV’s maximum resolution.

•

BD Wise : Automatically sets the resolution to the resolution of the BD/DVD disc if you have connected the product via HDMI to a TV with the BD Wise feature. (The BD Wise menu item appears only if BD Wise is set to On. See BD Wise above.)

•

1080p : Outputs 1080 lines of progressive video. (HDMI only)

•

1080i : Outputs 1080 lines of interlaced video.

•

720p : Outputs 720 lines of progressive video.

•

576p/480p : Outputs 576/480 lines of progressive video.

•

576i/480i : Outputs 576/480 lines of interlaced video. (VIDEO only)

English 27

HT-D4500_ELS_0609.indd 27HT-D4500_ELS_0609.indd 27 2011-06-09  2:25:102011-06-09  2:25:10

Setup

Resolution according to the output mode

Blu-ray Disc/E-contents/Digital Contents playback

•

HDMI / connected HDMI / not connected

Output

Setup

BD Wise

Auto

1080p@60F 1080p@60F 1080p@60F 576i/480i - - -

Movie Frame :

Auto (24Fs)

1080i 1080i 1080i 576i/480i 576i/480i 1080i 576i/480i 720p 720p 720p 576i/480i 576i/480i 720p 576i/480i

576p/480p 576p/480p 576p/480p 576i/480i 576i/480i 576p/480p 576i/480i

576i/480i - - - 576i/480i 576i/480i 576i/480i

•

DVD playback

Setup

BD Wise 576i/480i 576i/480i - -

Auto

1080p@60F 1080p@60F 576i/480i - -

1080i 1080i 576i/480i 576p/480p 576i/480i

720p 720p 576i/480i 576p/480p 576i/480i

576p/480p 576p/480p 576i/480i 576p/480p 576i/480i

576i/480i - - 576i/480i 576i/480i

HDMI Mode

Blu-ray Disc

Resolution of

Blu-ray Disc

Max.

Resolution of

TV input

1080p@24F 1080p@24F 576i/480i - - -

Output

E-contents/

Digital

contents

1080p@60F 576i/480i - - -

Max.

Resolution of

TV input

HDMI / connected HDMI / not connected

HDMI Mode

Max. Resolution of

TV input

Component/

VIDEO Mode

576i/480i - - -

Component/VIDEO

Mode

576i/480i - -

Component Mode

Blu-ray Disc

Component Mode VIDEO Mode

E-contents/

Digital

contents

VIDEO Mode

28 English

HT-D4500_ELS_0609.indd 28HT-D4500_ELS_0609.indd 28 2011-06-09  2:25:102011-06-09  2:25:10

NOTE

✎

If the TV you connected to the product does



not support Movie Frame or the resolution you selected, the message “If no pictures are shown after the selection, please wait for 15 seconds. And then, the resolution will be reverted to the previous value automatically. Would you like to make a selection?” appears. If you select Yes, the TV’s screen will go blank for 15 seconds, and then the resolution will revert to the previous resolution automatically.



If the screen stays blank after you have changed the resolution, remove all discs, and then press and hold the STOP () button on the front of the product for more than 5 seconds. All settings are restored to the factory default. Follow the steps on the previous page to access each mode and select the Display Setup that your TV will support.

When the factory default settings are restored,



all stored user BD data is deleted. The Blu-ray Disc must have the 24 frame



feature for the product to use the Movie Frame (24Fs) mode.



If both HDMI and Component jacks are connected and you are currently viewing Component output, the resolution is ﬁ xed to 576i/480i.

HDMI Colour Format

Lets you set the colour space format for HDMI output to match the capabilities of the connected device (TV, monitor, etc).

•

Auto : Automatically sets the product to the optimum format supported by your device.

•

YCbCr (4:4:4) : If your TV supports the YCbCr colour space via HDMI, select this to output the normal YCbCr colour gamut.

•

RGB (Standard) : Select this to output the normal RGB colour gamut.

•

RGB (Enhanced) : If you have connected the product to a DVI display device such as a monitor, select this to output the enhanced RGB colour gamut.

03 Setup

Movie Frame (24 Fs)

Setting the Movie Frame (24Fs) feature to Auto allows you to adjust the product’s HDMI output to 24 frames per second for improved picture quality. You can enjoy the Movie Frame (24Fs) feature only on a TV supporting this frame rate. You can select Movie Frame only when the product is in the HDMI 1080i or 1080p output resolution modes.

Auto : Movie Frame (24Fs) functions work.

•

Off :

•

Movie Frame (24Fs) functions are off.

HDMI Deep Colour

Lets you output video from the HDMI OUT jack with Deep Colour. Deep Colour provides more accurate colour reproduction with greater colour depth.

•

Auto: The product outputs video with Deep Colour to a connected TV which supports HDMI Deep Colour.

•

Off : The picture is output without Deep Colour.

Still Mode

Lets you set the type of picture the product displays when you pause DVD playback.

•

Auto: Automatically shows the best still picture depending on the content.

•

Frame : Select when pausing a scene with a little action.

•

Field : Select when pausing a scene with a lot of action.

Progressive Mode

Lets you improve picture quality when viewing DVDs.

•

Auto : Select to have the product automatically select the best picture quality for the DVD you’re watching.

•

Video : Select for the best picture quality from concert or TV show DVDs.

English 29

HT-D4500_ELS_0609.indd 29HT-D4500_ELS_0609.indd 29 2011-06-09  2:25:102011-06-09  2:25:10

Setup

Audio

Speaker Settings

Settings

Display

Audio

Network System Language Security General Support

Level

You can adjust the balance and level for each speaker.

Adjusting Front/Centre/Surround/Subwoofer Speaker Level

• The volume level can be adjusted in steps from

-6dB to +6dB.

• The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.

Settings

Display

Audio

Network System Language Security General Support

Speaker Settings

Level |

Distance

Test Tone : Off

Front L

◄

Front R : Center : Surround L : 0 dB Surround R : Subwoofer : Test Tone :

0 dB | 0 dB 0 dB

0 dB 0 dB Off

Move < Change ' Return

Move " Enter ' Return

Level

Distance

If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the front, centre, surround and subwoofer speakers.

You can set the Speaker Distance between

•

1ft(0.3m) and 30ft(9.0m).

Settings

Display

Audio

Network System Language Security General Support

Front L Front R : 10(ft) 3.0(m) Center : 10(ft) 3.0(m) Surround L : 10(ft) 3.0(m) Surround R : 10(ft) 3.0(m) Subwoofer : 10(ft) 3.0(m) Test Tone : Off

Distance

◄

10(ft) 3.0(m) |

Move < Change ' Return

Test Tone

Use the Test Tone feature to check the speaker connections.

Press the ◄, ► buttons to select ON.

•

A test tone will be sent to Front L  Center  Front R  Surround R  Surround L  Subwoofer in order so you can make sure the

speakers are set up correctly.

To stop the test tone, press the ◄, ► buttons to select Off.

Settings

Display

Audio

Network System Language Security General Support

Speaker Settings

Level

Distance

Test Tone ◄ On

Move " Enter ' Return

NOTE

✎

When HDMI Audio is ON (audio is produced



through TV speakers), the Test Tone function is not available.

30 English

HT-D4500_ELS_0609.indd 30HT-D4500_ELS_0609.indd 30 2011-06-09  2:25:102011-06-09  2:25:10

+ 250 hidden pages