SAMSUNG HP-T5054 User Manual

HP-T4254 HP-T5054
PLASMA DISPLAY
Owner’s Instructions
Register your product at www.samsung.com/global/register Record your Model and Serial number here for future reference.
▪ Model _______________ ▪ Serial No. _______________
Important Warranty Information Regarding Television Format Viewing
Wide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary
images that exceed the above guidelines can cause uneven aging of PDP Displays that leave subtle, but permanent burned-in ghost images in the PDP picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars.
On PDP models that offer picture sizing features, use these controls to view different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven PDP aging as a result of format selection and use, as well as burned-in images, are not covered by your Samsung limited warranty.
U.S.A Only
The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. In particular, this product is licensed under the following US patents: 5,991,715, 5,740,317, 4,972,484, 5,214,678, 5,323,396, 5,539,829, 5,606,618, 5,530,655, 5,777,992, 6,289,308, 5,610,985, 5,481,643, 5,544,247, 5,960,037, 6,023,490, 5,878,080, and under US Published Patent Application No. 2001-44713-A1.
This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for commercial use. The license does not cover any product unit other than this product unit and the license does not extend to any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit. The license only covers the use of this product unit to encode and/or decode audio files conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
Other countries
The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for commercial use. The license does not cover any product unit other than this product unit and the license does not extend to any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit. The license only covers the use of this product unit to encode and/or decode audio files conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
© 2007 Samsung Electronics Co., Ltd. All rights reserved.
User Instructions
Screen Image retention
Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, refer to page 26 of this manual to reduce the degree of brightness and contrast of the screen when displaying a still image.
Altitude
The PDP can only operate normally at heights under 6500ft.
Heat on the top of the PDP TV
The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the product. This is normal and does not indicate any defect or operation failure of the product. However, children should be prevented from touching the upper part of the product.
The product is making a ‘cracking’ noise.
A ‘cracking’ noise may occur when the product contracts or expands due to a change of surrounding environment such as temperature or humidity. This is normal and not a defect of the unit.
Cell Defects
The PDP uses a panel consisting of 1,230,000(SD-level) to 3,150,000(HD-level) pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
Avoid operating the TV at temperatures below 5°C (41°F)
A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the PDP TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.
Afterimage on the Screen.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images for a long time.
Warranty
Warranty does not cover any damage caused by image retention.
Burn-in is not covered by the warranty.
Contents
GENERAL INFORMATION
■ List of Features .............................................................. 5
Accessories ....................................................................
Viewing the Control Panel .............................................
Viewing the Connection Panel .......................................
Remote Control .............................................................. 8
Installing Batteries in the Remote Control .....................9
5 6 7
CONNECTIONS
■ Connecting VHF and UHF Antennas .............................9
■ Connecting Cable TV ...................................................
■ Connecting a VCR ....................................................... 11
■ Connecting an S-VHS VCR ......................................... 11
■ Connecting a Camcorder .............................................12
■ Connecting a DVD Player/Set-Top Box .......................
■ Connecting a DVD Player/Set-Top Box via HDMI .......
■ Connecting a DVD Player/Set-Top Box via DVI ...........
■ Connecting a Digital Audio System ..............................
■ Connecting an Amplifier/DVD Home Theater ..............
■ Connecting a PC .......................................................... 14
10
12 13 13 14 14
OPERATION
■ Turning the TV On and Off ...........................................15
■ Plug & Play Feature .....................................................15
■ Changing Channels .....................................................17
■ Adjusting the Volume ...................................................
■ Viewing the Display .....................................................
■ Viewing the Menus ......................................................
■ Memorizing the Channels ............................................ 19
■ Setting Up Your Remote Control ..................................
■ To Select the Source ....................................................
■ To Edit the I
nput Source Name ....................................25
18 18 18
20 25
PICTURE CONTROL
■ Using Automatic Picture Settings .................................26
■ Digital Noise Reduction ...............................................27
■ Changing the Screen Size ........................................... 28
■ Configuring Detailed Settings on the Picture ...............
■ Active Color ..................................................................
■ DNIe (Digital Natural Image engine) ............................30
■ Selecting the Film Mode ..............................................31
■ Setting the Blue Screen Mode ..................................... 31
■ Setting the HDMI Black Level ...................................... 31
■ Viewing Picture-in-Picture ............................................
■ Freezing the Current Picture ........................................ 33
29 30
32
SOUND CONTROL
■ Using Automatic Sound Settings .................................34
■ Customizing the Sound ................................................ 34
■ Setting the TruSurround XT .........................................
Choosing a Multi-Channel Sound (MTS) Track - Digital
Choosing a Multi-Channel Sound (MTS) Track - Analog
■ Automatic Volume Control ...........................................
■ Selecting the Internal Mute .......................................... 36
■ Adjusting the Melody Sound ........................................
■ Listening to the Sound of the Sub (PIP) Picture ..........37
35 .. 35 .. 36
36
37
CHANNEL CONTROL
■ Selecting the Antenna .................................................. 38
■ Adding and Erasing Channels .....................................
■ Setting Your Favorite Channels ...................................
■ Viewing the Channel Lists ...........................................
■ Setting the Default Channel List Mode ........................ 40
■ Labeling Channels ....................................................... 41
■ Fine Tuning Analog Channels ......................................
■ Checking the Digital-Signal Strength ........................... 42
■ LNA (Low Noise Amplifier) ...........................................
38 39 40
41
42
PC DISPLAY
■ Using Your TV as a Computer (PC) Display ................ 43
■ Display Modes ............................................................ 43
■ Setting up the TV with your PC .................................... 44
■ Setting the Home Theater PC ......................................
45
TIME SETTING
■ Setting the Time ........................................................... 46
FUNCTION DESCRIPTION
■ Selecting a Menu Language ........................................ 49
■ Using the Game Mode ................................................. 49
Viewing Closed Captions (On-Screen Text Messages) - Digital
Viewing Closed Captions (On-Screen Text Messages) - Analog
■ Menu Transparency Level ...........................................
■ Setting the Light Effect .................................................
■ Using the Energy Saving Feature ................................ 53
■ Preventing Screen Burn-in ........................................... 53
■ Reducing the Effects of Screen Burn ...........................
■ Setting the Function Help ............................................ 54
■ Wall- mount adjustment (Sold separately) ...................
■ Upgrading the Software ............................................... 56
■ Using the V-Chip .......................................................... 56
About Anynet
■ What is Anynet+? ......................................................... 62
■ Connecting Anynet+ Devices .......................................
■ Setting Up Anynet+ ......................................................
■ Scanning and Switching between Anynet+ Devices ....
■ Recording .................................................................... 64
■ Listening through a Receiver ....................................... 65
■ Check Points before Requesting Service .................... 65
+
....
.. 51
50
52 52
54
55
62 63 63
APPENDIX
■ Troubleshooting ........................................................... 66
■ Installing the Wall Mount Kit .........................................
■ How to assemble the Stand-Base
(depending on the model) ........................................... 68
■ Specifications ...............................................................
■ Dimensions (HP-T4254) .............................................. 69
■ Dimensions (HP-T5054) .............................................. 70
67
68
Symbols
Press
One-Touch
Button
Note
General Information
RETURN
FAV.CH
List of Features
• Adjustable picture settings that can be stored in the TV’s memory.
• Automatic timer to turn the TV on and off.
• A special sleep timer.
• V-Chip function.
• Excellent Digital Interface & Networking : With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Set-Top Box needed.
• Remote Control The supplied remote can be used to operate the TV as well as most DVD players, Set-top boxes, Cable Boxes and VCRs.
• Excellent Picture Quality
- DNIe technology provides life-like clear images.
• SRS TruSurround XT
- SRS TruSurround XT provides a virtual Dolby surround system.
Accessories
Please make sure the following items are included with your TV. If any items are missing, contact your dealer.
Remote Control
(BN59-00599A) /
AAA Batteries
(4301-000103)
Cover-Bottom /
Screws (2ea)
(Refer to page 68)
Power Cord
(3903-000144)
Ferrite Core for
Power Cord
(3301-001110)
Owner’s Instructions /
Quick Setup Guide
Ferrite Core for
Side-AV / S-VIDEO
(3301-001305 )
Warranty Card /
Registration Card /
Safety Guide Manual
Ferrite Core for
Headphone
(3301-001456)
Cloth-Clean
The following parts are sold separately and are available at most electronics stores.
S-VIDEO Cable (BN39-00149A) HDMI Cable (BN39-00641A) HDMI/DVI cable (BN39-00643A) Component Cables (RCA)
PC Cable (BN39-00115A) PC Audio Cable (BN39-00061B) Optical Cable Antenna Cable (BN39-00333A)
Ferrite Core (Power Cord, Audio/Video Cable,
S-Video Cable, Headphone)
(BN39-00279A)
The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug.
Viewing the Control Panel
Buttons on the Lower-Right Part of the Panel
The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control.
The product color and shape may vary depending on the model.
1
SOURCE
Toggles between all the available input sources
(TV, AV1, AV2, S-Video1, S-Video2, Component1, Component2, PC, HDMI1, HDMI2, or HDMI3).
2
MENU
Press to see an on-screen menu of your TV’s features.
3
+ VOL –
Press to increase or decrease the volume. In the on-
screen menu, use the + VOL – buttons as you would use the and buttons on the remote control.
4
CH
Press to change channels.
In the on-screen menu, use the CH buttons as you would use the and buttons on the remote
control.
5
Press to confirm a selection.
6
Press to turn the TV on and off.
Blinks and turns off when the power is on and lights up
Aim the remote control towards this spot on the TV.
7
(ENTER)
POWER
Power Indicator
in stand-by mode.
Remote Control Sensor
Speakers
Viewing the Connection Panel

Rear Panel Jacks
Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players. For more information on connecting equipment, see pages 9-14. The product color and shape may vary depending on the model.
1
POWER IN
Connect the supplied power cord.
2
DIGITAL AUDIO OUT (OPTICAL)
Connect to a Digital Audio component.
3
AUDIO OUT (R/L)
Audio outputs to external devices.
4
PC AUDIO IN
Connect to the audio output jack on your PC.
5
PC IN
Connect to the video output jack on your PC.
6
DVI IN (HDMI 1) (AUDIO-R/L)
Connect to the DVI audio output jack of an external device.
7
HDMI IN 1, 2
Connect to the HDMI jack of a device with HDMI output. (Only HDMI 1 can support HDMI-DVI IN and PC.)
This input can also be used as a DVI connection with separate analog audio inputs. An optional HDMI/DVI cable will be necessary to make this connection. When using an optional HDMI/DVI adapter, the DVI analog
audio inputs on your TV allow you to receive left and right audio from your DVI device. (Not compatible with PC)
8
ANT 1 IN(AIR)/ANT 2 IN(CABLE)
75Ω Coaxial connector for Air/Cable Network.
9
EX-LINK
Connect this to the jack on the optional wall mount
bracket. This will allow you to adjust the TV viewing angle using your remote control.
0
AUDIO-R/L (AV IN 1)
Audio inputs for external devices, such as a camcorder
or VCR.
!
S-VIDEO (AV IN 1)
S-Video input for external devices with an S-Video
output, such as a camcorder or VCR.
@
VIDEO (AV IN 1)
Video input for external devices, such as a camcorder
or VCR.
#
COMPONENT IN 1, 2
Component video (Y/PB/PR) and audio (R-AUDIO-L) inputs.
Side Panel Jacks
Use the right side panel jacks to connect a component that is used only occasionally, such as a camcorder or video game. The product color and shape may vary depending on the model.
1
HDMI IN 3
Connect to the HDMI jack of a device with HDMI output.
2
SERVICE
For service only.
3
S-VIDEO IN 2
S-Video input for external devices with an S-Video output.
4
AV IN 2
Video and audio inputs for external devices.
5
HEADPHONE
You can connect a set of headphones if you wish to watch a television program without
disturbing other people in the room.
Remote Control
RETURN
FAV.CH
You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD player, or Set-Top Box.
1
This is a special remote control for
the visually impaired, and has Braille points on the POWER, Channel, Volume, STOP, and PLAY/PAUSE buttons.
The performance of the remote control
POWER
Turns the TV on and off.
2
NUMERIC BUTTONS
Press to directly select a channel.
3
Press to select additional channels
(digital and analog) being broadcast by the same station. For example, to select channel “54-3”, press “54”, then press “–” and “3”.
4
CH LIST
Used to display Channel Lists on the
screen.
5
ANTENNA
Press to select “AIR” or “CABLE”.
6
VCR/DVD Functions
- Rewind
- Stop
- Play/Pause
- Fast/Forward
7
Press to increase or decrease the
8
Press to temporarily cut off the
9
Displays the main on-screen menu.
0
Press to select the sound mode.
!
Returns to the previous menu.
@
Press to select the picture mode.
#
Controls the caption decoder.
$
Press to switch to your favorite
%
Press to select a preset time interval
^
Selects SRS TruSurround XT mode.
&
SET
Sets the remote to control your TV,
*
TV/DVD/STB/CABLE/VCR
Press to operate your TV, DVD, STB,
+ VOL
volume.
MUTE
sound.
MENU
S.MODE
RETURN
P.MODE
CAPTION
FAV.CH
channels.
SLEEP
for automatic shut off.
SRS
VCR, Cable, DVD, or Set-Top Box.
CABLE (box), or VCR.
(
Press to backlight the VOL, CH,
and active source button (TV, DVD, CABLE, STB, VCR) on the remote.
)
SOURCE
Press to display all of the available
video sources.
a
PRE-CH
Tunes to the previous channel.
b
WISELINK
Not available.
c
REC
This remote can be used to control
recording on Samsung recorders.
(Refer to page 64)
d
CH
Press to change channels.
e
EXIT
Press to exit the menu.
f
UP▲/DOWN▼/LEFT◄/ RIGHT►/ENTER
Use to select on-screen menu items
and change menu values.
g
INFO
Press to display information on the
TV screen.
h
Anynet+
Runs the Anynet+ view functions and
sets up Anynet+ devices.
i
STILL
Press to stop the action during a
particular scene. Press again to resume normal video.
j
P.SIZE
Press to change the screen size.
k
PIP
Picture-in Picture ON/OFF.
l
CH /
Displays the available channels in
sequence. (These buttons change channels in the PIP window only.)
m
MTS
Press to choose stereo, mono or
Separate Audio Program (SAP broadcast).
n
RESET
When your remote does not work,
change the batteries and press the RESET button for 2-3 seconds before use.
may be affected by bright light.
Installing Batteries in the Remote Control
1 Lift the cover at the back of the remote control upward as shown in the figure. 2 Install two AAA size batteries.
Make sure to match the “+” and “–” ends of the batteries with the diagram inside the
compartment.
Do not mix battery types, i.e. alkaline and manganese.
3 Close the cover as shown in the figure.
Remove the batteries and store them in a cool, dry place if you won’t be using the
remote control for a long time. The remote control can be used up to about 23 feet (7m) from the TV. (Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power cut, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?
Connections
Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like this, see “Antennas with 300 Ω Flat Twin Leads” below.
If your antenna has one lead that looks like this, see “Antennas with 75 Ω Round Leads”. If you have two antennas, see “Separate VHF and UHF Antennas”.
Antennas with 300 Ω Flat Twin Leads
If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300 Ω twin flat leads, follow the directions below.
1 Place the wires from the twin leads under the screws on a 300-75 Ω adapter (not supplied).
Use a screwdriver to tighten the screws.
2 Plug the adaptor into the ANT 1 IN (AIR) or ANT 2 IN (CABLE) terminal on the back of the TV.
Antennas with 75 Ω Round Leads
1
Plug the antenna lead into the ANT 1 IN (AIR) or ANT 2 IN (CABLE) terminal on the back of the TV.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops).
1 Connect both antenna leads to the combiner.
2 Plug the combiner into the ANT 1 IN (AIR) or ANT 2 IN (CABLE) terminal on the bottom of the
back panel.
UHF
VHF
ANT 1 IN (AIR)
UHF
VHF
ANT 1 IN (AIR)
ANT 1 IN (AIR)
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box 1 Plug the incoming cable into the ANT 2 IN(CABLE) terminal on the back of the TV.
Because this TV is cable-ready, you do not need a cable box to view
unscrambled cable channels.
Connecting to a Cable Box that Descrambles All Channels
1 Find the cable that is connected to the ANT OUT terminal on your cable box.
This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.
2 Connect the other end of this cable to the ANT 2 IN(CABLE) terminal on the back of
the TV.
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available at most electronics stores.)
ANT IN
ANT 2 IN (CABLE)
ANT OUT
ANT 2 IN (CABLE)
1 Find and disconnect the cable that is
connected to the ANT IN terminal on your cable box.
This terminal might be labeled “ANT IN”,
“VHF IN” or simply, “IN”.
2 Connect this cable to a two-way splitter.
3 Connect an Antenna cable between an
OUTPUT terminal on the splitter and the IN terminal on the cable box.
4 Connect an Antenna cable between the
ANT OUT terminal on the cable box and the B–IN terminal on the RF(A/B) switch.
5 Connect another cable between the other
OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.
6 Connect the last Antenna cable between
the OUT terminal on the RF (A/B) switch and the ANT 2 IN (CABLE) terminal on the rear of the TV.
Incoming
cable
Incoming
cable
Incoming
Incoming
cable
Splitter
cable
Splitter
Splitter
ANT IN
Incoming
Splitter
cable
Cable Box
Cable Box
Splitter
RF (A/B)
Switch
Cable Box
RF (A/B)
Switch
RF (A/B)
Switch
TV Rear
ANT 2 IN (CABLE)
After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)
English - 10
English - 11
Connecting a VCR
Video Connection
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 9~10). Skip step 1 if you have not yet connected to an antenna or a cable system.
1 Unplug the cable or antenna
from the back of the TV.
2 Connect the cable or antenna
to the ANT IN terminal on the back of the VCR.
3 Connect an Antenna Cable
between the ANT OUT terminal on the VCR and the ANT 1 IN(AIR) or ANT 2 IN (CABLE) terminal on the TV.
4 Connect a Video Cable
between the VIDEO OUT jack on the VCR and the AV IN 1 [VIDEO] jack on the TV.
5 Connect Audio Cables
between the AUDIO OUT jacks on the VCR and the AV IN 1 [R-AUDIO-L] jacks on the TV.
If you have a “mono”
(non-stereo) VCR, use a Y­connector (not supplied) to hook up to the right and left audio input jacks of the TV. If your VCR is stereo, you must connect two cables.
VCR Rear Panel
2
Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
Audio Cable(Not supplied)5
Video Cable(Not supplied)4
Antenna cable(Not supplied)3
TV Rear Panel
S-Video Connection
Your Samsung TV can be connected to the S-Video jack of a VCR. (This connection delivers a better picture when compared to the regular Video connection above.)
1 To begin, follow steps 1–3
in the previous section to connect the antenna or cable
VCR Rear Panel
TV Rear Panel
to your VCR and your TV.
2 Connect an S-Video Cable
between the S-VIDEO OUT jack on the VCR and the AV IN 1 [S-VIDEO] jack on the TV.
3 Connect Audio Cables
between the AUDIO OUT jacks on the VCR and the AV IN 1 [R-AUDIO-L] jacks on
Audio Cable (Not supplied)
3
S-Video Cable(Not supplied)2
Antenna cable(Not supplied)3
the TV.
An S-Video may be included with your VCR. (If not, check your local electronics store.)
Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR
1 Connect a Video Cable
(or S-Video Cable) between the AV IN 2 [VIDEO] (or S-VIDEO) jack on the TV and the VIDEO OUT jack on the Camcorder.
2 Connect Audio Cables
between the AV IN 2 [L-AUDIO-R] jacks on the TV and the AUDIO OUT jacks on the Camcorder.
TV Side Panel
S-Video Cable(Not supplied)
1
or
Camcorder
Each Camcorder has a different back panel configuration.
When connecting a Camcorder, match the color of the connection terminal to the cable
Video Cable (Not supplied)1
Audio Cable (Not supplied)2
.
Connecting a DVD Player/Set-Top Box
The rear panel jacks on your TV make it easy to connect a DVD Player/Set-Top Box to your TV.
1 Connect Component Cables
between the COMPONENT IN 1 [Y, P COMPONENT IN 2 [Y, P
B
, PR] (or
B
, PR]) jacks on the TV and the COMPONENT OUT [Y, P
B
, PR] jacks on the DVD Player/ Set-Top Box.
2 Connect Audio Cables
between the COMPONENT IN 1 [R-AUDIO-L](or COMPONENT IN 2 [R-AUDIO-L]) jacks on the TV and the AUDIO OUT jacks on the DVD Player/Set-Top Box.
DVD Player / Set-Top Box
Audio Cable (Not supplied)2
Component Cable (Not supplied)1
Component video separates the video into Y (Luminance (brightness)), PB
(Blue) and PR (Red) for enhanced video quality. Be sure to match the component video and audio connections. For example, if connecting the video cable to COMPONENT IN, connect the audio cable to COMPONENT IN also.
Each DVD Player/Set-Top box has a different back panel configuration.
When connecting a DVD Player/Set-Top box, match the color of the connection
terminal to the cable.
TV Rear Panel
English - 12
English - 13
Connecting a DVD Player/Set-Top Box via HDMI
This connection can only be made if there is an HDMI Output jack on the external device. This connection will provide the highest quality picture.
1 Connect an HDMI Cable
between the HDMI IN 2 on the TV and the HDMI OUT on the DVD Player/Set-Top Box.
DVD Player / Set-Top Box
HDMI Cable (Not supplied)1
What is HDMI?
• HDMI, or high-definition multimedia interface, is an interface that enables the transmission of digital audio and video signals using a single cable without compression.
• The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed.
Each DVD Player/Set-Top box has a different back panel configuration.
When connecting a DVD Player/Set-Top box, match the color of the connection
terminal to the cable.
When connecting via HDMI, you do not need to connect Audio Cables. You only
need to connect Audio cables when connecting via HDMI/DVI.
TV Rear Panel
Connecting a DVD Player/Set-Top Box via DVI
This connection can only be made if there is a DVI Output jack on the external device.
1 Connect a HDMI/DVI Cable
or DVI-HDMI Adapter between the [HDMI IN 1] jack on the TV and the DVI jack on the DVD Player/Set-Top Box.
2 Connect Audio Cables
between the DVI IN (HDMI 1) [R-AUDIO-L] jack on the TV and the AUDIO OUT jacks on the DVD Player/Set-Top Box.
DVD Player / Set-Top Box
Audio Cable (Not supplied)2
HDMI/DVI Cable (Not supplied)1
Each DVD Player/Set-Top box has a different back panel configuration.
When connecting a DVD Player/Set-Top box, match the color of the connection
terminal to the cable.
When using an HDMI/DVI cable connection, you must use the HDMI IN1 terminal.
TV Rear Panel
Connecting a Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV. 1 Connect an Optical Cable
between the DIGITAL AUDIO OUT (OPTICAL) jacks on
Digital Audio System
TV Rear Panel
the TV and the Digital Audio Input (OPTICAL) jacks on the Digital Audio System.
When a Digital Audio System is connected to the “DIGITAL AUDIO OUT (OPTICAL)” terminal: Decrease the gain (volume) of the TV, and adjust the volume level with the system’s volume control.
What is OPTICAL?
• Converts the electric signal into an optical light signal, and transmits it through glass fibers. S/PDIF is a transmission system of digital audio in the form of a light wave
Optical Cable (Not supplied)
that uses a glass conductor.
5.1CH audio is possible when the TV is connected to an external device
supporting 5.1CH.
Each external input source device has a different back panel configuration.
If you have an external device (DVD. Cable/Set-top box) connected via HDMI to
the TV, audio is not output from the Optical jack.
Connecting an Amplifier/DVD Home Theater
1 Connect Audio Cables
between the AUDIO OUT [R-AUDIO-L] on the TV and AUDIO IN [L-AUDIO-R] on the Amplifier/DVD Home Theater.
When an audio amplifier is connected to the “AUDIO OUT [R-AUDIO-L]” terminals: Decrease the gain (volume) of the TV, and adjust the volume level with the Amplifier’s volume control.
Connecting a PC
Using the D-Sub Cable 1 Connect a D-Sub Cable
between PC IN [PC] jack on the TV and the PC output jack on your computer.
2 Connect a PC Audio Cable
between PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer.
Using the HDMI/DVI Cable 1 Connect a HDMI/DVI cable
between the [HDMI IN 1] jack on the TV and the PC output jack on your computer.
2
Connect a 3.5 mm Stereo plug to 2 RCA cable between the DVI IN (HDMI 1) [R-AUDIO-L] jack on the TV and the Audio Out jack of the sound card on your computer.
Amplifier/DVD Home Theater
Audio Cable (Not supplied)
Each Amplifier/DVD Home Theater has a different back panel configuration.
When connecting an Amplifier/DVD Home Theater, match the color of the
TV Rear Panel
connection terminal to the cable.
Using the D-Sub Cable
PC
PC Audio Cable (Not supplied)2
D-Sub Cable (Not supplied)1
Using the HDMI/DVI Cable
PC
3.5 mm Stereo plug to 2 RCA Cable (Not supplied)2
HDMI/DVI Cable (Not supplied)1
TV Rear Panel
TV Rear Panel
Each PC has a different back panel configuration.
When connecting a PC, match the color of the connection terminal to the cable.
When using an HDMI/DVI cable connection, you must use the HDMI IN1 terminal.
English - 14
English - 15
Operation
Turning the TV On and Off
Press the POWER button on the remote control. You can also use the POWER button on the TV.
It may take a while when your TV starts.
Plug & Play Feature
When the TV is initially powered On, basic settings proceed automatically and subsequently:
1 Press the POWER button on the remote control.
The message Menu language, Shop Mode, Channels and Time will be set. is displayed.
2 Press the ENTER button to enter the language.
Press the ▲ or ▼ button to select language, then press the ENTER button. The message Select Home Mode when installing this TV at home. is automatically displayed.
3 Press the ◄ or ► button to select Shop or Home, then press the ENTER
button.
The default selection is Home.
We recommend setting the TV to Home mode for the best picture in your
home environment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop mode and you want to return to
Dynamic (Home) mode, press the Volume button and then hold down the
MENU button for five seconds on the TV panel.
4 Press the ▲ or ▼ button to memorize the channels of the selected connection.
Press the ENTER button to select Start.
If the antenna is connected to ANT1 IN(AIR), select Air and if it is connected
to ANT 2 IN(CABLE), select
If both ANT 1 IN(AIR) and ANT 2 IN(CABLE) are connected,
Cable.
select the Air + Cable.
In Cable mode, select the correct analog signal cable system source from
among STD, HRC, and IRC by pressing the ▲ or ▼ button, then press the ENTER button. If you have Digital cable TV, select the cable system signal source for both Analog and Digital. Contact your local cable company to identify the type of cable system that exists in your particular area. To memorize the channels, press the ► button to select
Start, then press
the ENTER button. Contact your local cable company to identify the type of cable system that exists in your particular area.
Menu language, Shop Mode,
i
Channels and Time will be set.
Start
Plug & Play
Select the language of the OSD.
Menu Language :
Move
Select Home Mode when installing this TV at home.
Shop
Move
Select the antennas to memorize.
Air Cable Air + Cable
Move
Select the cable system.
Analog
STD
HRC IRC
Digital
STD
HRC IRC
Move
English
Spanish French
Enter
Plug & Play
Enter
Plug & Play
Enter
Plug & Play
Enter
Home
Start Start Start
Start
Skip
Skip
Skip
Skip
Continued...
5 The TV will begin memorizing all of the available channels.
After all the available channels are stored, the Auto program menu reappears. Press the ENTER button when channel memorization is complete. Clock Mode menu is automatically displayed.
To stop the search before it has finished, press the ENTER button with Stop
selected.
Plug & Play
Auto Program in progress.
Auto Program is completed. 14 Channels were memorized. Air : 9 , Cable : 5.
Cable Channel 67
Stop
Enter
Plug & Play
OK
Enter
68%
Skip
Skip
6 Press the ENTER button.
Press the ▲ or ▼ button to select Manual if you want to set the current time manually, then press the
ENTER button. Set current date and time. is
displayed.
If you select Auto, Set to daylight savings time. is displayed, then go to
step 9.
7 Press the ◄ or ► button to move to Month, Day, Year, Hour, Minute, or
am/pm. Set the date and time you want by pressing the ▲ or ▼ button,
then press the MENU button.
You can set the Month, Day, Year, Hour, and Minute directly by pressing
the number buttons on the remote control.
8 The message Enjoy your watching. is displayed.
When you have finished, press the ENTER button.
Even if the ENTER button is not pressed, the message will automatically
disappear after several seconds.
Setting the Clock Automatically
9 Press the ENTER button.
Press the ▲ or ▼ button to select On or Off, then press the ENTER button. Select the time zone in which you live. menu is automatically displayed.
Plug & Play
Select the clock mode.
Clock Mode :
Move
Set the current time.
Move
Enjoy your watching.
i
Set to daylight savings time.
Daylight Savings Time :
Manual
Auto
Enter
Plug & Play
Day Month Year
--
Hour Minute am/pm
--
Adjust
Plug & Play
OK
----
--
--
--
Enter
On
Off
Skip
Skip
10 Press the ▲ or ▼ button to highlight the time zone for your local area (and
to move the highlight to the appropriate time zone on the map of the United States). Press the ENTER button. If clock is not automatically set, see page 48 to set the clock.
11 The message
Enjoy your watching. is displayed.
When you have finished, press the ENTER button.
Even if the ENTER button is not pressed, the message will automatically
disappear after several seconds.
Continued...
English - 16
Move
Select the time zone in which you live.
Newfoundland Atlantic
Eastern
Central Mountain Pacific Alaska Hawaii
Move
Enjoy your watching.
i
Enter
Plug & Play
Enter
OK
Skip
Skip
English - 17
If you want to reset this feature...
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
2 Press the ENTER button to select Plug & Play. For further details on setting up
options, refer to the page 15~16.
The Plug & Play feature is only available in the TV and DTV mode.
Changing Channels
Using the Channel Buttons
1 Press the CH or CH button to change channels.
When you press the CH or CH button, the TV changes channels in
sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels). You will not see channels that were either erased or not memorized. See page 19 to memorize channels.
Using the Number Buttons
1 Press the number buttons to go directly to a channel. For example, to select
channel 27, press 2, then 7. The TV will change channels when you press the second number.
Plug & Play Language : English Time
Game Mode : Off
V-Chip Caption Menu Transparency
More
Move
Menu language, Shop Mode,
i
Channels and Time will be set.
Start
SetupT V
: Medium
Enter
Return
► ► ►
► ► ►
Using the “-” Button
The “-” button is used to select stations that broadcast a digital signal. 1 For example, for Channel 7-1, press 7, then -, then 1.
HD indicates the TV is receiving a Digital High Definition signal.
SD indicates the TV is receiving a Standard Definition signal.
For quick channel change, press the number buttons, then press the ENTER
button.
Using the PRE-CH Button to select the Previous Channel
Use the number buttons to quickly tune to any channel. 1 Press the PRE-CH button. The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one
channel, then use the number button to select the second channel. Then use the PRE-CH button to quickly alternate between them.
Adjusting the Volume
RETURN
Using the Volume Buttons
1 Press the VOL + or VOL – button to increase or decrease the volume.
Using the Mute Button
At any time, you can cut off the sound using the
MUTE button.
1 Press MUTE and the sound cuts off.
The word “Mute” will appear in the lower-left corner of the screen.
2 To turn mute off, press the MUTE button again, or simply press the VOL + or
VOL –
button.
Viewing the Display
The display identifies the current channel and the status of certain audio-video settings.
1 Press the INFO button on the remote control.
The TV will display the channel, the type of sound, and the status of certain picture and sound settings.
Press the INFO button once more or wait approximately 10 seconds and it disappears automatically.
Viewing the Menus
1 With the power on, press the MENU button.
The main menu appears on the screen. Its left side has five icons:
Picture, Sound, Channel, Setup, Input.
2 Use the ▲ or ▼ button to select one of the five icons.
Then press the ENTER button to access the icon’s sub-menu.
3 Press the EXIT button to exit.
It takes about one minute until the on-screen menu disappears.
Air 28
Mono Picture Mode : Dynamic
Sound Mode : Custom MTS : Stereo
12 : 00 am
Mode : Dynamic Contrast 100 Brightness 45 Sharpness 75 Color 55 Tint G 50 R 50
More
Move
PictureT V
Enter
Exit
English - 18
English - 19
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (air) and cable channels. After the available channels are memorized, use the CH or CH button to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an air or a cable system).
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then press the ENTER button.
2 Press the ENTER button select Antenna.
Press the ▲ or ▼ button to select Air or Cable, then press the ENTER button.
Press the
EXIT button to exit.
Storing Channels in Memory (Automatic Method)
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then press the ENTER button.
2 Press the ▲ or ▼ button to select Auto Program, then press the ENTER
button.
3 Press the ▲ or ▼ button to select the antenna connection, then press the
ENTER button.
Air: “Air” antenna signal.
Cable: “Cable” antenna signal. Air+Cable: “Air” and “Cable” antenna signals.
If the antenna is connected to ANT 2 IN (CABLE), select Cable and if it is
connected to ANT 1 IN (AIR), select If both ANT 1 IN and ANT 2 IN are connected, select the Air + Cable.
If you selected Air, then go to step 5.
Air.
4 Press the ▲ or ▼ to select the correct analog signal cable system source from
among STD, HRC, and IRC, then press the ENTER button. If you have Digital cable TV, select the cable system signal source for both Analog and Digital.
If you have Digital cable TV, select the signal source for both Analog and
Digital.
STD, HRC, and IRC identify various types of cable TV systems. Contact
your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected.
5 The TV begins memorizing all available stations.
If you want to stop Auto Programming, press the
ENTER button. The Stop
Auto Program? message will be displayed. Select Yes by pressing the ◄ or ►
button.
Press the
EXIT button to exit.
The TV must be connected to antenna/cable in order to receive digital TV
signals. Even if a particular channel is deleted from the memory, you can always tune to that channel directly by using the number buttons on the remote control.
• All available DTV and analog channels are automatically stored in
memory.
• It takes approximately 3 to 10 minutes to memorize channels.
Antenna : Air Auto Program
Clear Scrambled Channel
Channel List
Name Fine Tune
Signal Strength LNA : On
Move
Antenna : Air Auto Program
Clear Scrambled Channel
Channel List
Name Fine Tune
Signal Strength LNA : On
Move
Antenna : Air Auto Program
Clear Scrambled Channel
Channel List Name Fine Tune
Signal Strength
LNA : On
Move
Select the antennas to memorize.
Air Cable Air + Cable
Move
Select the cable system.
Analog
STD
HRC
IRC
Digital
STD
HRC
IRC
Move
Auto Program
Auto Program in progress.
Stop
Enter
Auto Program
Stop Auto Program?
Yes No
Move
Enter
ChannelT V
Enter
Return
ChannelT V
Air
Cable
Enter
Return
ChannelT V
Enter
Return
Auto ProgramT V
Start Start Start
Return
Enter
Auto ProgramT V
Start
Enter
Return
Cable Channel 67
68 %
Return
68 %
Return
► ►
► ►
► ►
► ►
► ► ►
Setting Up Your Remote Control
RETURN
FAV.CH
RETURN
FAV.CH
After your remote control has been properly set up, your remote control can operate in five different modes: TV, VCR, Cable, DVD, or Set-Top Box. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose.
The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and Set-Top Boxes.
Setting Up the Remote to Operate Your VCR
1 Turn off your VCR. 2 Press the 3 Press the SET button on your TV’s remote control. 4 Using the number buttons on your remote control, enter three digits of the VCR code listed
on page 22 of this manual for your brand of VCR. Make sure you enter three digits of the code, even if the first digit is a “0”. (If more than one code is listed, try the first one.)
5 Press the POWER button on the remote control. Your VCR should turn on if your remote
is set up correctly.
If your VCR does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes listed for your brand of VCR. If no other codes are listed, try each VCR code, 000 through 080.
Note on Using Remote Control Modes: VCR When your remote control is in VCR mode, the volume buttons still control your TV’s volume.
VCR button on your TV’s remote control.
Setting Up the Remote to Operate Your Cable Box
1 Turn off your cable box. 2 Press the CABLE button on your TV’s remote control. 3 Press the 4 Using the number buttons on your remote control, enter three digits of the cable box code
listed on page 23 of this manual for your brand of cable box. Make sure you enter three digits of the code, even if the first digit is a “0”. (If more than one code is listed, try the first one.)
5 Press the
Your cable box should turn on if your remote is set up correctly.
If your cable box does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes listed for your brand of cable box. If no other codes are listed, try each code, 000 through
046.
Note on Using Remote Control Modes: Cable Box When your remote control is in CABLE mode, the volume buttons still control your TV’s volume.
SET button on your TV’s remote control.
POWER button on the remote control.
Continued...
English - 20
English - 21
Setting Up the Remote to Operate Your DVD
RETURN
FAV.CH
RETURN
FAV.CH
1 Turn off your DVD. 2 Press the
DVD button on your TV’s remote control.
3 Press the SET button on your TV’s remote control. 4 Using the number buttons on your remote control, enter three digits of the DVD code listed
on page 24 of this manual for your brand of DVD. Make sure you enter three digits of the code, even if the first digit is a “0”. (If more than one code is listed, try the first one.)
5 Press the POWER button on the remote control.
Your DVD should turn on if your remote is set up correctly.
If your DVD does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes listed for your brand of DVD. If no other codes are listed, try each code, 000 through 141.
Note on Using Remote Control Modes: DVD When your remote control is in DVD mode, the volume buttons still control your TV’s volume.
Setting Up the Remote to Operate Your Set Top Box
1 Turn off your STB. 2 Press the STB button on your TV’s remote control. 3 Press the 4 Using the number buttons on your remote control, enter three digits of the STB code listed
on page 23 of this manual for your brand of STB. Make sure you enter three digits of the code, even if the first digit is a “0”. (If more than one code is listed, try the first one.)
5 Press the
Your STB should turn on if your remote is set up correctly.
SET button on your TV’s remote control.
POWER button on the remote control.
If your STB does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes listed for your brand of STB. If no other codes are listed, try each code, 000 through 074.
Note on Using Remote Control Modes: STB When your remote control is in STB mode, the volume buttons still control your TV’s volume.
Remote Control Codes
VCR
Brand
SAMSUNG ADMIRAL AIWA AKAI AUDIO DYNAMICS BELL&HOWELL BROKSONIC CANDLE CANON CITIZEN COLORTYME CRAIG CURTIS MATHES DAEWOO DB DIMENSIA DYNATECH ELECTROHOME EMERSON
FISHER FUNAI GENERAL ELECTRIC GO VIDEO LG(Goldstar) HARMAN KARDON HITACHI INSTANT REPLAY JC PENNEY
JCL KENWOOD KLH LIOYD LOGIK LXI JVC MAGNAVOX MARANTZ MARTA KONIA ORION MEI MEMOREX MGA MIDLAND MINOLTA
Code
000 001 002 003 004 005 077 078 079 020 025 004 027 032 007 026 018 022 002 003 006 008 015 055 021 056 002 003 006 008 015 055 007 002 024 002 007 008 017 021 025 056 064 066 003 010 011 012 013 014 015 016 007 026 017 025 034 001 003 006 021 022 025 030 032 034 040 047 050 052 060 063 065 066 067 069 073 018 024 028 029 048 051 061 025 002 005 017 021 056 002 006 007 008 009 010 007 019 025 041 042 074 021 002 007 018 019 021 026 037 041 054 056 007 008 018 021 026 037 007 008 018 026 037 070 025 038 025 081 082 083 021 056 059 007 008 018 021 026 037 062 006 036 073 074 075 076 021 006 021 024 025 034 005 019 041 075
Brand
MITSUBISHI MONTGOMERY WARD MTC MULTITECH NEC OPTIMUS PANASONIC PENTAX PENTEX RESEARCH+ PHILCO PHILIPS PIONEER PORTLAND PROSCAN QUARTZ QUASAR RADIO SHACK/ REALISTIC RCA
SANSUI SANYO SCOTT SEARS SHARP SHIMTOM SIGNATURE SONY SYLVANIA SYMPHONIC TANDY TASHIKA TATUNG TEAC TECHNICS TEKNIKA TMK TOSHIBA TOTEVISION UNITECH VECTOR RESEARCH VICTOR VIDEO CONCEPTS VIDEOSONIC WARDS
YAMAHA ZENITH
Code
019 034 041 046 020 002 025 002 005 025 038 007 008 018 026 037 062 064 020 021 056 071 072 019 041 075 008 021 056 059 021 080 019 026 039 053 015 049 055 017 018 021 056 006 018 020 021 024 025 029 034 048 056 002 017 019 021 035 041 043 057 068 076 026 018 024 003 047 052 067 006 018 019 024 028 029 041 048 051 020 034 045 015 027 033 038 058 025 027 033 044 021 025 056 059 025 018 025 006 037 025 037 068 021 006 021 025 031 066 003 019 029 051 052 002 006 002 007 026 026 007 026 002 002 003 006 019 020 021 024 025 034 038 041 007 008 018 026 037 023 027 033
English - 22
Continued...
English - 23
CABLE BOX
Brand
SAMSUNG GI HAMLIN HITACHI JERROLD MACOM MAGNAVOX OAK PANASONIC PHILIPS PIONEER RCA REGAL
Code
000 001 002 003 004 005 006 007 041 003 024 031 025 030 038 039 025 030 019 023 028 026 003 022 027 037 044 019 021 023 028 004 018 020 044 014 022 040 003
SAMSUNG SET-TOP BOX
Product
Ground wave STB Satellite STB CABLE STB STB DVD COMBO Satellite STB HDD COMBO Standard
SET-TOP BOX
Brand
ALPHASTAR ANAM CHANNEL MASTER CROSSDIGITAL CHAPARRAL DIRECT TV
DAEWOO DISH NETWORK SYSTEM DISHPRO DRAKE DX ANTENNA ECHOSTAR EXPRESSVU GOI GE GENERAL INSTRUMENT HTS HOME CABLE HITACHI HUGHES NETWORK IQ IQ PRISM JANEIL JERROID JVC
Code
023 043 018 034 019 035 015 016 017 019 022 045 060 061 062 065 066 067 068 074 069 070 069 018 024 032 027 025 069 070 071 069 069 065 046 047 048 063 064 069 056 022 015 017 020 020 059 063 069 070
Code
001 002 003 004 008 009
Brand
REGENCY SA SCIENTIFIC ATLAN SPRUCER STARGATE 2000 SYLVANIA TEXSCAN TOCOM UNIVERSAL VIEWSTAR WARNER AMEX ZENITH
Product
Satellite STB HDD COMBO Premium CABLE STB HDD COMBO Standard CABLE STB HDD COMBO Premium Ground wave STB HDD COMBO Standard Ground wave STB HDD COMBO Premium
Brand
LG(Goldstar) MAGNAVOX MEMOREX MOTOROLA MACOM MITSUBISHI NEXT LEVEL PHILIPS
PRIMESTAR PANASONIC PAYSAT PROSCAN RCA RADIOSHACK REALISTIC STS STAR TRAK SKY SKY LIFE SHACK STAR CHOICE SONY TOSHIBA ULTIMATE TV UNIDEN ZENITH
Code
015 023 042 043 042 043 022 036 016 016 032 033 034 019 021 023 028 046 017 029 035 037 045
Code
010 011 012 013 014
Code
044 073 016 021 036 038 039 040 041 042 016 064 018 015 047 048 064 015 016 017 021 033 036 038 039 040 041 042 067 046 049 050 063 058 059 061 062 016 065 066 051 052 053 065 066 064 057 020 027 026 031 005 006 007 064 064 054 060 015 017 028 029 030 072 060 066 016 021 037 055 056 057 024 031 068
Continued...
SAMSUNG DVD
Product
DVD DVDR BD Record VCR COMBO VCR Record DHR COMBO
DVD
Brand
ANAM AUDIOVOX AUDIOLOGIC ANABA APEX DIGITAL
AIWA BROKSONIC BLAUPUNKT B&K CURTIS MATHES CYBER HOME CLARION CIRRUS CINEVISION DAEWOO DENON FARENHEIT FISHER GPX GO VIDEO GE GREENHILL HITACHI HITEKER HOYO HARMAN / KARDON IRT INTEGRA JBL JVC JATON KENWOOD KISS KONKA KLH LG(Goldstar) LOEWE LASONIC MOBILE AUTHORITY MEMOREX MALATA MAGNAVOX MINTEK MONYKA
Code
000 001 002 003 004 005 006 007 008 009 010 011 012 013
Code
030 075 085 072 070 071 074 086 083 084 088 111 112 114 062 074 122 123 027 065 077 078 079 082 080 125 081 095 066 146 067 068 090 060 061 089 133 135 069 074 074 064 113 071 073 091 110 089 092 091 022 033 115 116 073 051 108 109 073 059 100 106 107 074 075 025 031 057 058 054 055 056 076 093 074 094 073
Product
Home Theater VCR COMBO HDD Record COMBO TWIN TRAY COMBO STB DVD COMBO DVD Receiver AV Receiver
Brand
NORCENT NEXT BASE NEC NANTAUS NESA OPTOMEDIA ELECTRONICS OPTIVIEW ONKYO PHILCO PRINCETON PROSCAN PANASONIC PHILIPS ROTEL RIO RCA RAITE ROWA SAMPO SONY
SHERWOOD SVA SYLVANIA SHARP SANSUI SANYO SHINSONIC SANYO THOMSON TOSHIBA TECHNICS TVIEW TOKAI TEAC TECHWOOD TREDEX URBAN CONCEPTS VENTURER VOCOPRO YAMAHA YAMAKAWA XWAVE ZENITH
Code
014 015 016 017 018 019 020 021
Code
048 049 050 052 053 144 074 105 072 076 092 119 044 045 046 047 023 024 034 124 134 136 137 138 036 076 117 118 120 023 035 074 075 131 132 073 038 104 026 029 126 127 128 129 130 141 039 041 042 043 093 140 062 062 094 090 145 028 062 076 139 072 073 096 097 098 099 101 076 075 102 032 063 040 073 103 076 121
English - 24
English - 25
To Select the Source
Use to select TV or other external input sources such as DVD players or Set-top/Cable boxes connected to the TV. Use to select the input source of your choice.
+
(HDMI-CEC)
InputT V
► ►
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Input, then press the ENTER button.
2 Press the ENTER button to select Source List.
Source List : TV Edit Name Anynet
Press the ▲ or ▼ button to select signal source, then press the ENTER button.
You can choose between the following sets of jacks: AV1, S-Video1,
Component1, Component2, PC, HDMI1, or HDMI2 on the TV’s rear panel and AV2, S-Video2, or HDMI3 on the TV’s side panel.
HDMI1, HDMI2, or HDMI3 input can only be selected when the external
device is turned on and connected via HDMI.
You can choose only those external devices that are connected to the TV.
You can also press the SOURCE button on the remote control to view an external signal source.
Move
TV
AV1 : AV2 : S-Video1 : S-Video2 : Component1 : Component2 :
More
Move
Source ListT V
Enter
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
Enter
Return
Return
To Edit the Input Source Name
You can name the device connected to the input jacks to make your input source selection easier.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Input, then press the ENTER button. Press the ▲ or ▼ button to select Edit Name, then press the ENTER button.
2 Press the ▲ or ▼ button to select AV1, AV2, S-Video1, S-Video2,
Component1, Component2, PC, HDMI1, HDMI2, or HDMI3 input jack, then press the ENTER button.
3 Press the ▲ or ▼ button to select VCR, DVD, D-VHS, Cable STB, HD STB,
Satellite STB, PVR STB, AV Receiver, DVD Receiver, Game, Camcorder, DVD Combo, PC, VOD STB, or TV input source, then press the ENTER button.
Press the
EXIT button to exit.
InputT V
Source List : TV Edit Name Anynet+ (HDMI-CEC)
Move
Edit NameT V
AV1 : AV2 : S-Video1 : S-Video2 : Component1 : Component2 :
More
AV1 :
AV2 : S-Video1 : S-Video2 : Component1 : Component2 :
More
AV1 :
AV2 : S-Video1 : S-Video2 : Component1 : Component2 :
More
Move
Move
Move
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
Edit NameT V
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
Edit NameT V
AV Receiver
- - - -
DVD Receiver
- - - -
Game
- - - -
Camcorder
- - - -
DVD Combo PC
- - - -
VOD STB
- - - -
TV
Enter
Enter
- - - -
VCR DVD D-VHS Cable STB HD STB Satellite STB PVR STB
Enter
Enter
Return
Return
Return
Return
► ►
► ► ► ► ► ►
Picture Control
RETURN
FAV.CH
Using Automatic Picture Settings
Your TV has three automatic picture settings (“Dynamic”, “Standard”, and “Movie”) that are preset at the factory. You can activate either Dynamic, Standard, or Movie by making a selection from the menu.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Picture, then press the ENTER button.
2 Press the ENTER button to select Mode.
Press the ▲ or ▼ button to select the Dynamic, Standard, or Movie picture setting, then press the ENTER button.
• Choose Dynamic to increase the clarity and sharpness of the picture.
• Choose Standard for general TV watching mode.
• Choose Movie when watching movies.
Press the P.MODE button on the remote control to select one of the standard picture settings.
3 Press the ▲ or ▼ button to select Contrast, Brightness, Sharpness, Color,
or Tint, then press the ENTER button.
4 Press the ◄ or ► button to decrease or increase the value of a particular item.
Press the ENTER button.
Tint doesn’t operate in PC mode.
• In PC mode, only the
Contrast and Brightness can be selected.
• Each adjusted setting will be stored separately according to its input mode.
• When you make changes to
Contrast, Brightness, Sharpness, Color, or
Tint. OSD color will also be adjusted accordingly.
Move
Move
Move
PictureT V
Enter
PictureT V
Dynamic
Standard Movie
Enter
ModeT V
Enter
Return
Return
Return
Return
Mode : Dynamic Contrast 100 Brightness 45 Sharpness 75 Color 55 Tint G 50 R 50
More
Mode : Dynamic
Contrast 100 Brightness 45 Sharpness 75 Color 55 Tint G 50 R 50
More
Mode : Dynamic Contrast 100 Brightness 45 Sharpness 75 Color 55 Tint G 50 R 50
More
Contrast 100
Move Adjust
Continued...
English - 26
English - 27
5 Press the ENTER button to return to Picture. 6 Press the ▲ or ▼ button to select Color Tone, then press the ENTER button.
7 Press the ▲ or ▼ button to select Cool2, Cool1, Normal, Warm1, or Warm2,
then press the ENTER button.
When the picture mode is set to Dynamic or Standard, Warm1 and Warm2
cannot be selected.
Resetting the Picture Settings to the Factory Defaults 8 Press the ▲ or ▼ button to select Reset, then press the ENTER button.
Press the ▲ or ▼ button to select OK, then press the ENTER button.
Press the
EXIT button to exit.
Each picture mode can be reset.
Move
Move
Move
PictureT V
PictureT V
PictureT V
Enter
Cool2
Cool1
Normal
Warm1 Warm2
Enter
Cancle
OK
Enter
More Color Tone : Cool1
Detailed Settings
Size : 16:9 Digital NR : Auto Active Color : On DNIe : On Reset : OK
More
Color Tone : Cool1
Detailed Settings
Size : 16:9 Digital NR : Auto Active Color : On DNIe : On Reset : OK
More Color Tone : Cool1
Detailed Settings
Size : 16:9 Digital NR : Auto Active Color : On DNIe : On
Reset :
Return
Return
Return
► ► ► ► ►
Digital Noise Reduction
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Picture, then press the ENTER button.
2 Press the ▲ or ▼ button to select Digital NR, then press the ENTER button.
3 Press the ▲ or ▼ button to select Off, Low, Mediunm, High, or Auto, then
press the ENTER button.
Press the
EXIT button to exit.
The Digital NR function is available in all modes except PC.
More Color Tone : Cool1
Detailed Settings
Size : 16:9 Digital NR : Auto Active Color : On DNIe : On Reset : OK
More Color Tone : Cool1
Detailed Settings
Size : 16:9
Digital NR : Auto
Active Color : On DNIe : On Reset : OK
Move
Move
PictureT V
PictureT V
Enter
Off Low Medium High
Auto
Enter
Return
Return
► ► ► ► ►
Changing the Screen Size
RETURN
FAV.CH
Screen size selection depends on the type of video input.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Picture, then press the ENTER button. 2 Press the ▲ or ▼ button to select Size, then press the ENTER button. 3 Press the ▲ or ▼ button to select the screen format you want.
Press the ENTER button. Press the
16:9 : Sets the picture to 16:9 wide mode.
Zoom1 : Magnifies the size of the picture on the screen.
Zoom2 : Expands the Zoom1 format picture.
Wide Fit : Enlarges the aspect ratio of the picture to fit the entire screen.
4:3 : Sets the picture to 4:3 normal mode.
Just Scan : Use this function to see the full image without any cutoff when DTV
EXIT button to exit.
or HDMI 720p/1080i signals are input.
Press the P.SIZE button on the remote control to change the picture size.
16:9
Sets the picture to 16:9 wide mode.
Zoom1
The screen size when Wide screen is vertically enlarged.
Zoom2
The screen size when the Zoom1 screen is vertically enlarged.
Move
Move
PictureT V
SizeT V
Po sit io n
Enter
Enter
More Color Tone : Cool1
Detailed Settings
Size : 16:9 Digital NR : Auto Active Color : On DNIe : On Reset : OK
16:9
Zoom1
Zoom2
Wide Fit
4:3 Just Scan
Re set
Return
Return
► ► ► ► ►
Wide Fit
Enlarges the aspect ratio of the picture to fit the entire screen.
4:3
Sets the picture to 4:3 normal mode.
Just Scan
Use this function to see the full image without any cutoff when DTV or HDMI 720p/1080i signals are input.
• In TV, VIDEO, S-VIDEO, and COMPONENT(480i, 480p) modes, all screen
modes can be selected. (16:9 Zoom1 Zoom2 4:3)
• In COMPONENT(720p, 1080i) or HDMI(720p, 1080i) mode, 16:9, 4:3 and
Wide Fit
can be selected.
• In Zoom1, Zoom2 and Wide Fit modes, you can move the picture on the screen by pressing the ▲ or ▼ button.
• You can not change the picture size when PIP is set to Double.
• When Double (
, ) mode has been set in PIP, the Picture Size cannot
be set.
• Wide Fit can be used when watching a Digital HD (High Definition) signal. Wide Fit sets the optimum picture format by expanding it both horizontally and vertically. For example, you can reset the picture in 4:3 format to 16:9. Wide Fit does not support all external devices (DVD, VCR etc.).
English - 28
English - 29
Making Detailed Picture Settings
You can set detailed picture settings.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Picture, then press the ENTER button.
2 Press the ▲ or ▼ button to select Detailed Settings, then press the ENTER
button.
3 Select the desired Detailed Settings option by pressing the ▲ or ▼ button, then
press the ENTER button.
4 When you are satisfied with your setting, press the ENTER button. Press the
When the picture mode is set to Dynamic, Detailed Settings cannot be
EXIT button to exit.
selected.
Black Adjust: Off/Low/Medium/High
You can directly select the black level on the screen to adjust the screen depth.
Dynamic Contrast: Off/Low/Medium/High
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma: -3 ~ 3
You can adjust the middle brightness of pictures. Press the ◄ or ► button until you reach the optimal setting.
Color Space: Auto/Wide
Color space is a color matrix composed of red, green, and blue colors. Select your favorite color space and experience the most natural color. You can set the color reproduction space for the input signal to
Auto or Wide.
White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset
You can adjust the color temperature for more natural picture colors. R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment
value will refresh the adjusted screen. Select the desired option by pressing the ▲ or ▼ button, then press the ENTER button. Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.
My Color Control: Pink/Green/Blue/White/Reset
This setting can be adjusted to suit your personal preferences. Pink/Green/Blue/White: Select the desired color by pressing the ▲ or ▼ button,
then press the ENTER button. Press the ◄ or ► button until you reach the optimal setting.
When using the My Color Control Feature, the current picture remains in
movement.
Reset: The previously adjusted colors will be reset to the factory defaults.
Edge Enhancement: Off/On
You can emphasize object boundaries.
More Color Tone : Cool1 Detailed Settings Size : 16:9 Digital NR : Auto
Active Color : On DNIe : On
Reset : OK
Black Adjust : Off Dynamic Contrast Gamma : 0 Color Space : Wide White Balance My Color Control Edge Enhancement
Black Adjust : Off
Dynamic Contrast Gamma : 0 Color Space : Wide White Balance My Color Control Edge Enhancement
Black Adjust : Off
Dynamic Contrast
Gamma : 0 Color Space : Wide White Balance My Color Control Edge Enhancement
Gamma 0
Black Adjust : Off Dynamic Contrast Gamma : 0
Color Space : Wide
White Balance My Color Control Edge Enhancement
R-Offset 15 G-Offset 15 B-Offset 15 R-Gain 15 G-Gain 15 B-Gain 15 Reset
Pink 15 Green 15 Blue 15 White 15 Reset
PictureT V
Move
Detailed SettingsT V
: Off
: Off
Move
Detailed SettingsT V
: Off
: Off
Move
Detailed SettingsT V
: Off
: Off
Move
Adjust
Detailed SettingsT V
: Off
: Off
Move
White Balance
Move
My Color Control
Enter
Enter
Off
Low Medium High
Enter
Off
Low Medium High
Enter
Return
Auto
Wide
Enter
Enter
Return
Return
Return
Return
Return
Return
► ► ► ►
► ►
► ► ► ► ► ► ►
Move
Enter
Detailed SettingsT V
Black Adjust : Off Dynamic Contrast Gamma : 0 Color Space : Wide White Balance My Color Control
Edge Enhancement
Move
: Off
: Off
Off
On
Enter
Return
Return
Active Color
If you turn on this option, the colors of the sky and grass will be stronger and clearer for a more vivid on-screen picture.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Picture, then press the ENTER button.
2 Press the ▲ or ▼ button to select Active Color, then press the ENTER button.
3 Press the ▲ or ▼ button to select Off or On, then press the ENTER button.
Press the
This function is not available in PC mode.
When you select Standard or Movie in Picture Mode, the Active Color
automatically changes to Off and it is deactivated.
EXIT button to exit.
When the Picture Mode is set to Dynamic, the Active Color is activated
Color Tone : Cool1
Detailed Settings
Size : 16:9
Digital NR : Auto
Active Color : On
DNIe : On
Reset : OK
T V
Color Tone : Cool1
Detailed Settings
Size : 16:9
Digital NR : Auto
Active Color : On
DNIe : On
Reset : OK
More
More
Move
Move
PictureT V
Enter
Picture
Off
On
Enter
► ► ► ► ►
Return
Return
regardless of the Picture Mode settings.
DNIe (Digital Natural Image engine)
This TV includes the DNIe function to provide high visual quality. If you set DNIe to on, you can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Picture, then press the ENTER button.
2 Press the ▲ or ▼ button to select DNIe, then press the ENTER button.
This function doesn’t work when the Input Source is PC.
3 Press the ▲ or ▼ button to select Off, Demo or On, then press the ENTER
button.
Press the
• Off: Switches off the DNIe mode.
• Demo: The screen before applying DNIe appears on the left and the screen after
• On: Switches on the DNIe mode.
EXIT button to exit.
applying DNIe appears on the right.
The DNIe function is not supported in the Standard and Movie mode.
(It is inactivated.)
DNIeTM (Digital Natural Image engine)
This feature brings you more a detailed image with 3D noise reduction and detail, contrast and white enhancement.
Color Tone : Cool1
Detailed Settings
Size : 16:9
Digital NR : Auto
Active Color : On
DNIe : On
Reset : OK
T V
Color Tone : Cool1
Detailed Settings
Size : 16:9
Digital NR : Auto
Active Color : On
DNIe :
Reset :
More
More
Move
Move
PictureT V
Enter
Picture
Off Demo
On
On
Enter
► ► ► ► ►
Return
Return
English - 30
Loading...
+ 114 hidden pages