Samsung hpt4254x service manual
!"#$%#&'($!"#)&*+ ,-.*/.*$
1. Precaution
2. Product Specification
3. Disassembly & Reassembly
4. Troubleshooting
5. Exploded View & Part List
6. Wiring Diagram
7. Schematic Diagram
$/0+(,/
%12314
HP-T4254
HP-T5054
!"#$%#&'($!"#)&*+
,516676 8 9:;<=.>?'@>"74A&
%BCD4 8 ?!*;EF;GHG##&
?!*FIF;GHG##
Refer to the service manual in the GSPN (see the rear cover) for the more information.
If you need more information on Computer and Electronic Repair, please visit these
in fact
websites to improve yourself.
http://www.fastrepairguide.com
http://www.protech2u.com
http://www.plasma-television-repair.com
http://www.lcd-television-repair.com
Happy Repairing!!
Highly Recommended Repair Ebook:
If you’re a LCD Monitor repairer, then this is the best guide for you.
Why? Because, the author revealed all his LCD Monitor Repairing
secrets for you. I think, with just few Repair tips you learned from
this guide you will get back your investment!
Click Here to read more.
This eBook will show you how to test the electronic component
correctly and accurately. Some of you may say that I don’t
need this eBook because it is too simple! Do you know that,
there is lots of testing electronic components secrets I have learned
from this guide? Do you know how to test a‘TRIAC’ correctly and
accurately? If you answer no then I guess you have to get this
EBook. Click Here to read more.
Are you tired of searching the service manuals to look for the value
of a burnt resistor? If the answer is YES, then this eBook is a ‘must
have’ guide for you. You can save a lot of time and be able to repair
customer’s Electronic equipment with burnt resistors in it.
Click here to read more.
This Service Manual is a property of Samsung Electronics Co.,Ltd.
Any unauthorized use of Manual can be punished under applicable
International and/or domestic law.
© Samsung Electronics Co., Ltd. Feb. 2007
Printed in Korea
AA82-04340A
Area Web Site
North America service.samsungportal.com
Latin America latin.samsungportal.com
CIS cis.samsungportal.com
Europe europe.samsungportal.com
China china.samsungportal.com
Asia asia.samsungportal.com
Mideast & Africa mea.samsungportal.com
GSPN (Global Service Partner Network)
Table of Contents
Chapter 1 Precaution
! 1-1 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
! 1-2 Servicing Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
! 1-3 Static Electricity Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
! 1-4 Installation Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
Chapter 2 Product Specification
! 2-1 Product Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
! 2-2 Specifications Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
! 2-3 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Chapter 3 Disassembly & Reassembly
! 3-1 Overhaul Disassembly & Reassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Chapter 4 Troubleshooting
! 4-1 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
! 4-2 Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16
! 4-3 Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-33
Chapter 5 Exploded View & Part List
! 5-1 HPT4254X/XAA Exploded View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
! 5-2 HPT5054X/XAA Exploded View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
! 5-3 HPT4254X/XAA Service Item . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
! 5-4 HPT5054X/XAA Service Item . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Chapter 6 Wiring Diagram
! 6-1 Overall Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
Chapter 7 Schematic Diagram
! 7-1 Circuit Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
! 7-2 Schematic Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3
1. Make sure all protective devices are properly installed
including non-metallic handles and compartment covers
when installing or re-installing the chassis or chassis
assemblies.
2. Make sure that no gaps exist between the cabinets for
children to insert their fingers in to prevent children from
receiving electric shocks. Gaps mentioned above include
ventilation holes between the PDP module and the cabinet mask, and the improper installation of the rear cabinet.
Errors may occur when the resistance is below 1.0 ! or
over 5.2 !.
In these cases, make sure that the device is repaired
before sending it back to the customer.
3. Check for Electricity Leakage (Figure 1-1)
Warning: Do not use an insulated transformer for checking the leakage. Use only those current leakage testers
or mirroring systems that comply with ANSIC 101.1 and
the Underwriter Laboratory's specifications (UL1410,
59.7).
Fig. 1-1 AC Leakage Test
4. A high voltage is maintained within the specified limits
using safety parts, calibration and tolerances. When
voltage exceeds the specified limits, check each special
part.
5. Warning for Engineering Changes:
Never make any changes or additions to the circuit
design or the internal part for this product.
Ex: Do not add any audio or video accessory
connectors. This might cause physical damage.
Furthermore, any changes or additions to the original
design/engineering will invalidate the warranty.
6. Warning - Hot Chassis:
Some TV chassis are directly connected to one end of
the AC power cord for electrical reasons.
Without insulated transformers, the product can only be
repaired safely when the chassis is connected to the
earth end of the AC power source.
To make sure the AC power cord is properly connected,
follow the instructions below. Use the voltmeter to
measure the voltage between the chassis and the
earth ground. If the measurement is over 1.0V, unplug
the AC power cord and change the polarity before reinserting it. Measure the voltage between the chassis
and the ground again.
7. Some TV chassis are shipped with an additional secondary grounding system. The secondary system is
adjacent to the AC power line. These two grounding
systems are separated in the circuit using an unbreakable/unchangeable insulation material.
8. When any parts, material or wiring appear overheated or
damaged, replace them with new immediately. When
any damage or overheating is detected, correct this
immediately and make a regular check of possible
errors.
9. Check for the original shape of the lead, especially that
of the antenna wiring, any sharp edges, the AC power
and the high voltage power. Carefully check if the wiring
is too tight, incorrectly placed or loose. Never change the
space between the part and the printed circuit board.
Check the AC power cord for possible damages. Keep
the part or the lead away from any heat-emitting
materials.
Precaution
Samsung Electronics 1-1
To avoid possible damage or electric shocks or exposure to radiation, follow the instructions below with regard to safety, installation, service and ESD.
1. Precaution
1-1 Safety Precautions
(READING SHOULD
DEVICE
UNDER
TEST
EXPOSED METAL
2-WIRE CORD
ALSO TEST WITH
PLUG REVERSED
(USING AC ADAPTER
PLUG AS REQUIRED)
TEST ALL
SURFACES
LEAKAGE
CURRENT
TESTER
NOT BE ABOVE
0.5mA)
EARTH
GROUND
10. Safety Indication:
Some electrical circuits or device related materials
require special attention to their safety features, which
cannot be viewed by the naked eye. If an original part is
replaced with another irregular one, the safety or
protective features will be lost even if the new one has a
higher voltage or more watts.
Critical safety parts should be bracketed with ( ).
Use only regular parts for replacements (in particular,
flame resistance and dielectric strength specifications).
Irregular parts or materials may cause electric shock or
fire.
Precaution
1-2 Samsung Electronics
!
1. The service instructions are printed on the cabinet, and
should be followed by any service personnel.
2. Make sure to unplug the AC power cord from the power
source before starting any repairs.
(a) Remove or re-install parts or assemblies.
(b) Disconnect the electric plug or connector, if any.
(c) Connect the test part in parallel with the electrolytic
capacitor.
3. Some parts are placed at a higher position than the
printed board. Insulated tubes or tapes are used for this
purpose. The internal wiring is clamped using buckles to
avoid contact with heat emitting parts. These parts are
installed back to their original position.
4. After the repair, make sure to check if the screws, parts
or cables are properly installed. Make sure no damage is
caused to the repaired part and its surroundings.
5. Check for insulation between the blade of the AC plug
and that of any conductive materials (i.e. the metal
panel, input terminal, earphone jack, etc).
6. Insulation Check Process: Unplug the power cord from
the AC source and turn the switch on. Connect the insulating resistance meter (500v) to the AC plug blade.
The insulating resistance between the blade of the AC
plug and that of the conductive material should be more
than 1 !.
7. Any B+ interlock should not be damaged.
If the metal heat sink is not properly installed, no
connection to the AC power should be made.
8. Make sure the grounding lead of the tester is connected
to the chassis ground before connecting to the positive
lead. The ground lead of the tester should be removed
last.
9. Beware of risks of any current leakage coming into
contact with the high-capacity capacitor.
10. The sharp edges of the metal material may cause
physical damage, so protect yourself by wearing gloves
during the repair.
11. Due to the nature of plasma display panels, partial afterimages may appear if a still picture is displayed on the
screen for a long period of time.
This is caused by brightness deterioration due to the
storage effect of the panel, and to prevent this from
happening, we recommend that the brightness and contrast are reduced.
(e.g.) Contrast: 25, Brightness: 50
Precaution
Samsung Electronics 1-3
Warning 1: First carefully read the "Safety Instruction" in this service manual.
When there is a conflict between the service and the safety instructions, follow the safety instruction at all times.
Warning 2: Any electrolytic capacitor with the wrong polarity will explode.
1-2 Servicing Precautions
1-3 Static Electricity Precautions
1. Some semi-conductive ("solid state") devices are
vulnerable to static electricity. These devices are known
as ESD. ESD includes the integrated circuit and the field
effect transistor. To avoid any materials damage from
electrostatic shock, follow the instructions described
below.
2. Remove any static electricity from your body by
connecting the earth ground before handling any
semi-conductive parts or assemblies. Alternatively,
wear a dischargeable wrist-belt.
(Make sure to remove any static electricity before
connecting the power source - this is a safety instruction
for avoiding electric shock)
3. Remove the ESD assembly and place it on a conductive
surface such as aluminum foil to prevent accumulating
static electricity.
4. Do not use any Freon-based chemicals.
Such chemicals will generate static electricity that
causes damage to the ESD.
5. Use only grounded-tip irons for soldering purposes.
6. Use only anti-static solder removal devices.
Most solder removal devices do not support an
anti-static feature. A solder removal device without an
anti-static feature can store enough static electricity to
cause damage to the ESD.
7. Do not remove the ESD from the protective box until the
replacement is ready. Most ESD replacements are
covered with lead, which will cause a short to the entire
unit due to the conductive foam, aluminum foil or other
conductive materials.
8. Remove the protective material from the ESD
replacement lead immediately after connecting it to the
chassis or circuit assembly.
9. Take extreme caution in handling any uncovered ESD
replacements. Actions such as brushing clothes or lifting
your leg from the carpet floor can generate enough static
electricity to damage the ESD.
Precaution
1-4 Samsung Electronics
CAUTION
These servicing instructions are for use by
qualified service personnel only.
To reduce the risk of electric shock do not
perform any servicing other than that contained in the
operating instructions unless you are qualified to do so.
Precaution
Samsung Electronics 1-5
1-4 Installation Precautions
1. For safety reasons, more than two people are required
for carrying the product.
2. Keep the power cord away from any heat emitting
devices, as a melted covering may cause fire or electric
shock.
3. Do not place the product in areas with poor ventilation
such as a bookshelf or closet. The increased internal
temperature may cause fire.
4. Bend the external antenna cable when connecting it to
the product. This is a measure to protect it from being
exposed to moisture. Otherwise, it may cause a fire or
electric shock.
5. Make sure to turn the power off and unplug the power
cord from the outlet before repositioning the product.
Also check the antenna cable or the external connectors
if they are fully unplugged. Damage to the cord may
cause fire or electric shock.
6. Keep the antenna far away from any high-voltage cables
and install it firmly. Contact with the high-voltage cable or
the antenna falling over may cause fire or electric shock.
7. When connecting the RF antenna, check for a DTV
receiving system and install a separate DTV reception
antenna for areas with no DTV signal.
8. When installing the product, leave enough space (4")
between the product and the wall for ventilation
purposes.
A rise in temperature within the product may cause fire.
9. When moving a PDP with removable speakers, detach
the speakers first before moving the main body.
Moving the PDP main body without separating the
speakers may cause the speakers to detach, possibly
causing damage or injury.
1-6 Samsung Electronics
MEMO
Product Specification
Samsung Electronics 2-1
2. Product Specification
2-1 Product Specification
Features
Block Specification Major IC Remark
RF Digital/Analog (DTV Built In)
NTSC/VSB/QAM Tuner
S4LF111X01(Lake2)
PDP Module Samsung SDI W2A Module 42"HD/50"HD New Module
Power
Samsung/Dong-yang electro
mechanics SMPS
Video
NTSC 3.58, ATSC
HDMI
DNIe(FBE2)
Component, PC
Lake2
SDP64
Sound SRS TruSuround XT, Dolby Digital MSP 4450K, NTP-3000 Optical Output
Cabinet C9 Design
Specification
Model HP-T4254 HP-T5054
Screen Size 42 Inches (16:9) 50 Inches (16:9)
Dimensions (WxHxD) 41.5 x 29.9 x 12.4 inches 48.4 x 33.4 x 12.4 inches
Weight 73.2 lbs / 33.2 kg 97 lbs / 44 kg
PC Resolution 1024 x 768 @ 75Hz 1365 x 768 @ 60Hz
Voltage AC 100~240V, 60Hz
ANTENNA input
ANT 1 - AIR IN
ANT 2 - CABLE IN
!75"
unbalanced
VIDEO input
AV1, AV2
S-VIDEO1, S-VIDEO2
COMPONENT1 - 480i/480p/720p/1080i
COMPONENT2 - 480i/480p/720p/1080i
PC
HDMI1 (DVI Compatible) - 480p/720p/1080i
HDMI2 - 480p/720p/1080i
HDMI3(Side-AV) - 480p/720p/1080i
AUDIO input
AV1, AV2
S-VIDEO
COMPONENT1 - 480i/480p/720p/1080i
COMPONENT2 - 480i/480p/720p/1080i
PC
DVI
Audio Output AUDIO (L/R)
Speaker Output 10W + 10W 15W + 15W
New Features Anynet+
Product Specification
2-2 Samsung Electronics
##
New Features explanation
- Anynet+ : Anynet+ is an AV network system that enables you to control all connected Samsung AV devices with your
Samsung TV's remote.
To directly connect to TV
TV
Anynet+ Device 1 Anynet+ Device 2 Anynet+ Device 3
Connect the [HDMI 1], [HDMI 2]
or [HDMI 3] jack on the TV
and the HDMI OUT jack of the
corresponding Anynet+ device
using the HDMI cable.
HDMI 1.3 Cable
HDMI 1.3 Cable
HDMI 1.3 Cable
To connect to Home Theater
1. Connect the [HDMI 1],
2. Connect the HDMI IN jack
Optical Cable
TV
HDMI 1.3 Cable
HDMI 1.3 Cable
Anynet+ Device 1 Anynet+ Device 2
HDMI 1.3 Cable
Home Theater
HDMI 1.3 Cable
Anynet+ Device 3
Connect the Optical cable between [Digital Audio Out (Optical)] on your TV and Digital Audio Input on the Home
Theater.
Connect only one Home Theater.
You can listen to 5.1 channel sound through the home theater’s speakers. Otherwise, you can only listen to 2 channel
stereo sound in other cases. Make sure to connect the Digital Audio IN (Optical) of the home theater and the TV
correctly to listen to TV sound through the home theater. However, you cannot listen to sound from the BD recorder
that is sent to the home theater via the TV in 5.1 channel sound because the TV outputs only 2 channel stereo sound.
Please see the manual for the home theater.
You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet+ functions.
Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.
Anynet+ supports up to 12 AV devices in total.
[HDMI 2] or [HDMI 3]
jack on the TV and the
HDMI OUT jack of the
corresponding Anynet+
device using the HDMI
cable.
of the home theater and
the HDMI OUT jack of the
corresponding Anynet+
device using the HDMI
cable.
Product Specification
Samsung Electronics 2-3
2-2 Specifications Analysis
Model HP-T4254 (Lily-42HD) HP-T5054 (Lily-50HD) HP-S4253 (Cadillac-42HD)
Design
Basic
Display Type PDP TV PDP TV PDP TV
Built-In Tuner
$ $ $
Resolution 1024 x 768 1365 x 768 1024 x 768
PDP Module W2A W2A Samsung SDI V5.1
Screen Size 42" 50" 42"
Picture ratio 16 : 9 16 : 9 16 : 9
Dimensions (WxHxD) 41.5 x 29.9 x 12.4 inches 48.4 x 33.4 x 12.4 inches 41.5 x 28 x 3.8 inches
Weight 73.2 lbs / 33.2kg 97 lbs / 44kg 75.4 lbs / 34.2 kg
Picture
Brightness 1,500 Cd/m2 1,300 Cd/m2 1,200 Cd/m2
Contrast Ratio 10000:1 10000:1 7,000 : 1
Picture Enhacer FBE2 FBE2 LBE
Comb Filter
$ $ $
Audio
Equalizer 5 Band 5 Band 5 Band
Auto Volume Control
$ $ $
Surround Sound SRS TruSurround XT SRS TruSurround XT SRS TruSurround XT Dolby Digital (AC3)
Speaker Output 10W + 10W 15W + 15W 10W + 10W
Features
PIP
$ $ $
Double Window
$ $ $
Caption
$ $ $
Still Image
$ $ $
EPG
$ $ $
My Color Control
$ $ $
Color Weakness X X
$
Energy Saving
$ $ $
Anynet
$$ $
X
Connections
Antenna 2 (Cable/Air) 2 (Cable/Air) 2 (Cable/Air)
AV Input 2 2 2
S-Video 2 2 2
Component 2 2 2
PC(D-SUB) 1 1 1
DVI X X X
HDMI 3 3 2
Sub Woofer X X X
Optical 1 1 1
Coaxial X X 1
ETC Speaker/Stand Built-in Speaker Built-in Speaker Built-in Speaker/Stand
! $: application, X: non-application
! For the power supply and power consumption, refer to the label attached to the product.
Product Specification
2-4 Samsung Electronics
2-3 Accessories
Accessories Item Item code Remark
Supplied Accessories
Remote Control
Batteries
BN59-00599A
4301-000103
Samsung Service center
Power Cord 3903-000144
Owner's Instructions BN68-01192E
Warranty Card
Registration Card
Safety Guide Manual
BN68-00872A
AA68-03870B
AA68-03242F
Cloth-Clean BN63-01798A
Ferrite Core for
Power Cord
3301-001110
Ferrite Core for
Side-AV/S-VIDEO
3301-001305
Ferrite Core for
Headphone
3301-001456
Cover-Bottom
Screws (2ea)
BN63-03055A
6003-001621
Accessories that can be purchased
additionally
S-VIDEO Cable
47.244 inches
BN39-00149A
Electronics Store/
Internal shopping mall
HDMI Cable
118.11 inches
BN39-00641A
HDMI/DVI cable
118.11 inches
BN39-00643A
Component Cables (RCA)
59.055 inches
BN39-00279A
Product Specification
Samsung Electronics 2-5
Accessories Item Item code Remark
Accessories that can be purchased
additionally
Optical Cable None
Electronics Store/
Internal shopping mall
PC Cable
72.047 inches
BN39-00115A
PC Audio Cable
78.740 inches
BN39-00061B
Antenna Cable
118.11 inches
BN39-00333A
2-6 Samsung Electronics
MEMO
Part Name Description Description Photo
Cover
Rear
! Remove 4 screws. ( )
: M8,L16,ZPC(BLK),SWRCH18A,WP
" Remove 15 screws. ( )
: BH,+,B,M4,L3,ZPC(BLK)
# Remove 4 screws. ( )
: PH,+,WSP,S,M4,L35,ZPC(BLK)
$ Remove the 2 Hex nuts for the PC
input. ( )
: #4-40,L6,NI PLT,C3601,-
% Remove the rear cover.
: Please lay the PDP unit face down on a
soft surface when removing the stand.
Disassembly & Reassembly
Samsung Electronics 3-1
3. Disassembly & Reassembly
3-1 Overall Disassembly & Reassembly
3-1-1 Separation of ASSY COVER P-REAR
Notice
- Be sure to separate the power cord before disassembling the unit.
- Discharge the capacitors first when separating PCB's with high capacity capacitors such as SMPS, X Main Board, Y Main
Board, etc. (A spark may be generated by the electric charge, and there is danger of electronic shock.)
- Check that the cables are properly connected referring to the circuit diagram when disassembling or assembling the unit
taking care not to damage the cables.
- Take care not to scratch the Glass Filter in the front.
- Assemble the boards in the reverse order of the disassembly.
- The plasma must be layed down on a flat padded surface for disassembly and reassembly.
3-1-2 Separation of ASSY PCB MISC-MAIN
Part Name Description Description Photo
Main
Board
! Detach all connectors from the Main
Board.
" Remove 4 screws.
: PH,+,WWP,M3,L8,NI PLT
# Remove the Main Board.
Disassembly & Reassembly
3-2 Samsung Electronics
3-1-3 Separation of FILTER-EMI AC LINE
Part Name Description Description Photo
FILTER-
EMI
AC LINE
! Detach connector from SMPS.
" Remove 2 screws. ( )
: PH,+,WWP,M3,L8,NI PLT
# Remove a screw. ( )
: BH,+,S,M4,L10,ZPC(BLK)
$ Remove FILTER-EMI AC LINE.
3-1-4 Separation of BRACKET-PCB
Part Name Description Description Photo
Bracket
PCB
! Remove a screw.
: BH,+,S,M4,L10,ZPC(BLK)
" Remove the BRACKET-PCB.
Disassembly & Reassembly
Samsung Electronics 3-3
3-1-5 Separation of ASSY BRACKET
Part Name Description Description Photo
42"
Bracket
! Remove 4 screws. ( )
: BH,+,S,M4,L10,ZPC(BLK)
" Remove 2 screws. ( )
: BH,+,B,M4,L3,ZPC(BLK)
# Remove Bracket.
50"
Bracket
! Remove 4 screws. ( )
: BH,+,S,M4,L10,ZPC(BLK)
" Remove 2 screws. ( )
: BH,+,B,M4,L3,ZPC(BLK)
# Remove Bracket.
3-1-6 Separation of ASSY BOARD P-SIDE AV
Part Name Description Description Photo
Side AV
! Remove a screw. ( )
: BH,+,B,M4,L3,ZPC(BLK)
" Remove a screw. ( )
: BH,+,S,M4,L10,ZPC(BLK)
# Remove the Side AV.
Disassembly & Reassembly
3-4 Samsung Electronics
3-1-7 Separation of ASSY BRACKET P-WALL
Part Name Description Description Photo
42"
Wall
Bracket
! Remove 2 screws. ( )
: BH,+,B,M4,L3,ZPC(BLK)
" Remove 6 screws. ( )
: BH,+,S,M4,L10,ZPC(BLK)
# Remove Wall Bracket.
: Please lay the PDP panel face down
on a soft surface when separating front
cover.
50"
Wall
Bracket
! Remove 2 screws. ( )
: BH,+,B,M4,L3,ZPC(BLK)
" Remove 6 screws. ( )
: BH,+,S,M4,L10,ZPC(BLK)
# Remove Wall Bracket.
: Please lay the PDP panel face down on
a soft surface when separating front
cover.
Disassembly & Reassembly
Samsung Electronics 3-5
3-1-8 Separation of ASSY SPEAKER P
Part Name Description Description Photo
42"
Speaker
! Remove 4 screws.
: BH,+,WP,B,M4.0,L3,ZPC(BLK),
SWRCH18A
" Remove the Speaker.
50"
Speaker
! Remove 4 screws.
: BH,+,WP,B,M4.0,L3,ZPC(BLK),
SWRCH18A
" Remove the Speaker.
3-1-9 Separation of ASSY BOARD P-POWER&IR
Part Name Description Description Photo
Power
&
IR Board
! Detach all connectors from the
Power&IR Board.
" Remove the Power&IR PCB unlocking
the 2 holders.
Disassembly & Reassembly
3-6 Samsung Electronics
3-1-10 Separation of SMPS-PDP TV
Part Name Description Description Photo
42"
SMPS
! Detach all connectors from the SMPS.
" Remove 8 screws.
: PH,+,WWP,M3,L8,NI PLT
# Remove the SMPS.
: Wear gloves when handling the power
board as there may be some remaining
electrical charge in the capacitor.
Specifically, avoid touching any part of
the capacitor.
50"
SMPS
! Detach all connectors from the SMPS.
" Remove 8 screws.
: PH,+,WWP,M3,L8,NI PLT
# Remove the SMPS.
: Wear gloves when handling the power
board as there may be some remaining
electrical charge in the capacitor.
Specifically, avoid touching any part of
the capacitor.
Disassembly & Reassembly
Samsung Electronics 3-7
3-1-11 Separation of ASSY PDP MODULE P-LOGIC MAIN BOARD
Part Name Description Description Photo
42"
Logic
Board
! Detach all connectors from the Logic
Main Board.
" Remove 4 screws.
: WSP,PH,+,M3,L8,NI PLT
# Remove the Logic Main Board.
50"
Logic
Board
! Detach all connectors from the Logic
Main Board.
" Remove 4 screws.
: WSP,PH,+,M3,L8,NI PLT
# Remove the Logic Main Board.
Disassembly & Reassembly
3-8 Samsung Electronics
3-1-12 Separation of ASSY PDP MODULE P-X MAIN BOARD
Part Name Description Description Photo
Flat Cable
! Detach all Connectors from the X Main
Board.
& To separate the Flat Cable of the
X-Board, press the upper and the lower
sides of the connector.
42"
X-Main
Board
! Remove 4 screws.
: PH,+,WWP,M3,L8,NI PLT
" Remove the X-Main Board.
50"
X-Main
Board
! Remove 4 screws.
: PH,+,WWP,M3,L8,NI PLT
" Remove the X-Main Board.
Disassembly & Reassembly
Samsung Electronics 3-9
3-1-13 Separation of ASSY PDP MODULE P-Y MAIN BOARD
Part Name Description Description Photo
Flat Cable
! Detach the 6 scan board connectors
from the panel by pulling the holder from
both the top and bottom ends.
42"
Y-Scan
Board
! Remove 3 screws.
: PH,+,WWP,M3,L8,NI PLT
50"
Y-Scan
Board
! Remove 5 screws.
: PH,+,WWP,M3,L8,NI PLT
Disassembly & Reassembly
3-10 Samsung Electronics
Part Name Description Description Photo
42"
Y-Main
Board
! Remove 4 screws.
: PH,+,WWP,M3,L8,NI PLT
" Detach all connectors from the Y-Main
Board.
50"
Y-Main
Board
! Remove 4 screws.
: PH,+,WWP,M3,L8,NI PLT
" Detach all connectors from the Y-Main
Board.
Disassembly & Reassembly
Samsung Electronics 3-11
3-1-14 Separation of ASSY PDP MODULE P-ADDRESS BUFFER BOARD
Part Name Description Description Photo
42"
Still Bar
! Remove 4 screws.
: PH,+,WWP,M3,L8,NI PLT
" Remove the still bar.
50"
Still Bar
! Remove 4 screws.
: PH,+,WWP,M3,L8,NI PLT
" Remove the still bar.
42"
Buffer
Board
! Detach the all connectors from the
buffer board.
" Remove 12 screws.
: PH,+,WWP,M3,L8,NI PLT
# Remove the E-Board and F-Board.
50"
Buffer
Board
! Detach the all connectors from the
buffer board.
" Remove 14 screws.
: PH,+,WWP,M3,L8,NI PLT
# Remove the E-Board and F-Board.
3-1-16 Separation of ASSY PCB FUNCTION
Part Name Description Description Photo
Function
Board
! Remove 2 screws.
: BH,+,B,M4,L3,ZPC(BLK)
" Remove the Function Board.
Disassembly & Reassembly
3-12 Samsung Electronics
3-1-15 Separation of ASSY PANEL BRACKETS
Part Name Description Description Photo
Panel
Brackets
! Remove 3 screws. ( )
: BH,+,B,M4,L3,ZPC(BLK)
" Remove 4 screws. ( )
: BH,+,S,M4,L10,ZPC(BLK)
# Remove the Side Panel Brackets.
Troubleshooting
Samsung Electronics 4-1
4-1-1 First Checklist for Troubleshooting
1. Check the various cable connections first.
- Check to see if there is a burnt or damaged cable.
- Check to see if there is a disconnected or loose cable connection.
- Check to see if the cables are connected according to the connection diagram.
2. Check the power input to the Main Board.
3. Check the voltage in and out between the SMPS ! Main Board, between the SMPS ! X, Y Main Board, and between the
Logic Boards.
4. Troubleshooting
4-1 Troubleshooting
Troubleshooting
4-2 Samsung Electronics
4-1-2 Checkpoints by Error Mode
"
"
No Power
Symptom
- The LEDs on the front panel do not work when connecting the power cord.
- The SMPS relay does not work when connecting the power cord.
- The units appears to be dead.
Major Checklist
The SMPS relay or the LEDs on the front panel does not work when connecting the power cord if the cables
are improperly connected or the Main Board or SMPS is not functioning. In this case, check the following:
- Check the internal cable connection status inside the unit.
- Check the fuses of each part.
- Check the output voltage of SMPS.
- Replace the Main Board.
Troubleshooting
Procedures
Is the AC IN socket connector and
the SMPS CN800 connected?
Insert the AC in connector and the
SMPS CN800 connector
Is the Fuse (F801S) of the SMPS
Power Input Part blown?
Replace Fuse (F801S)
Replace the SMPS
SMPS CN801
Pin 3 : STB 5V
Pin 2 PS-ON : Check to see if it is 0V
Replace the Main Board
#
#
$
Yes
No
Yes
No
No
Yes
Loading...