Samsung HP-R5052, HP-R4252 Owner’s Manual

ImportantWarrantyInformation RegardingTelevisionFormatViewing

Wide screen format PDPDisplays (16:9, the aspect ratio of the screen width to height) are primarily

designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on nonexpanded standard format television video and programming, shou]d be limited to no more than 5% of the total television viewing per week.

Additionally, viewing other stationary images and text such as stock market reports, video game

displays, station Iogos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines

can cause uneven aging of PDP Displays that leave subtle, but permanent burned-in

ghost images in the PDP picture. To avoid this, vary the programming and images,

and primarily display full screen moving images, not stationary patterns or dark bars.

On PDP models that offer picture sizing features, use these controls to view different formats as a full

screen picture.

Be careful in the selection and duration of television formats used for viewing. Uneven PDP aging as a result of format selection and use, as well as burned-in images, are not covered by your Samsung limited warranty.

U.S.A Only

The product unit accompanying this user manual is licensed under certain intellectual property

rights of certain third parties. In particular, this product is licensed under the following US patents:

5,991,715, 5,740,317, 4,972,484, 5,214,678, 5,323,396, 5,539,829, 5,606,618, 5,530,655, 5,777,992, 6,289,308, 5,610,985, 5,481,643, 5,544,247, 5,960,037,

6,023,490, 5,878,080, and under US Published Patent Application No. 2001-44713-A1.

This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for commercial use. The license does not cover any product unit other than this product unit and the license does not extend to any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this

product unit. The license only covers the use of this product unit to encode and/or decode audio

files conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this

license for product features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.

Other countries

The product unit accompanying this user manual is licensed under certain intellectual property

rights of certain third parties. This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for commercial use. The license does not cover any product unit other than this product unit and the license does not extend to any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit. The license only covers the use of this product unit to encode and/or decode audio files conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not conform to the

ISO/IEC 11172-3 or ISO/IEC 13818-3.

UserInstructions

ScreenImageretention

Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, refer to page 53 of this manual to reduce the degree of brightness and contrast of the screen when displaying a still image.

Altitude

The PDP will not operate normally at altitudes above 6500 ft.

Heatonthetopof thePDPTV

The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the product. This is normal and does not indicate any defect or operation failure of the product. However, children should be prevented from touching the upper part of the product.

Theproductismakinga 'cracking'noise.

A 'cracking' noise may occur when the product contracts or expands due to a change of surrounding environment such as temperature or humidity. This is normal and not a defect of the

unit.

CellDefects

The PDP uses a panel consisting of 1,230,OOO(SD-level) to 3,150,OO0(HD-leve]) pixels which

require sophisticated technology to produce. However, there may be few bright or dark pixels on

the screen. These pixels will have no impact on the performance of the product.

AvoidoperatingtheTVattemperaturesbelow5°C(41°F)

AstillimagedisplayedtoolongmaycausepermanentdamagetothePDPPanel.

Watching the PDPTV in 4:3 format for a long period of time may leave traces of borders displayed on the ]eft, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.

AfterimageontheScreen.

Displaying still images from Video games and PC for longer than a certain period of time may

produce partial afterimages.

To prevent this effect, reduce the 'brightness' and 'contrast' when displaying still images for a

long time.

Warranty

Warranty does not cover any damage caused by image retention. Burn-in is not covered by the warranty.

Installation

Be sure to contact an authorized service center when installing your set in a location with heavy dust, high or low temperatures, high humidity, and chemical substances, or where it will be

operated for 24 hours continuously such as an airport, train station, etc. Failure to do so may cause serious damage to your set.

CableCARDandDigitalCableReadyTVs

CableCARD and Digital Cable Ready TVs are the products of a new digital cable standard. This new standard is called OpenCable and it is a concerted effort to standardize the digital cable

service network interface in North America. For more information, please refer to www.cablelabs.com.

Digital Cable Ready TVs are equipped with a proper digital cable tuner to receive digital cable signals from your local cable service provider. They are also designed to work with digital CableCARD modules (PCMCIA card modules called CabJeCARDs). These PCMCIA card modules or CableCARDs

will be provided by your local cable service provider after a proper subscription process.

The provided CableCARD from your local cable service provider needs to be inserted into the CableCARD slot of a Digital Cable Ready TV. Please refer to page 25 for how to insert the

CableCARD. A digital set-top box which used to be provided by the cable service provider is no longer needed

with Digital Cable Ready TVs and CableCARDs.

When the CableCARD is inserted into the slot, the TV screen will show a message that CableCARD

is inserted and necessary data such as channel information or subscription information will be downloaded from your digital cable service provider. When you insert CableCARD for the first time, this process may take few minutes depending on the amount of data your cable provider needs to send. During this process, the digital cable service provider or CableCARD may display messages

on the TV screen to help or give you further information.

Please contact your local cable provider for more information on service availability and how to acquire a CableCARD.

* This television receiver supports the copy protection system regulated by DTLA (Digital Transmission

Licensing Administrator). It should be noted that copy protected content may not be viewable depending on your particular connections.

* Some channels may be scrambled depending on your cable service provider.

When you tune to these channels, no screen or a still screen may appear. In order to view the

screen properly, you have to go through a subscription process after contacting your service provider. It will take several minutes to update the channel information depending on your cable service provider.

Q&A

1. _sthe antenna _use{er existin9 I"Vreceptiengeod eneughfer DI"V?

Over-the-air (OTA) digital TV broadcasting uses the same channels as analog TV and works well with

many existing TV antennas. However, DTV broadcast channel assignments are different than analog channels. You should find out whether your local DTV broadcasts are on VHF (channels 2-131 or UHF (channels 14-69 / to see if you need a different antenna.

If your DTV channels are on UHF and you already get good UHF reception, your present antenna may

work fine. The same holds true for VHF DTV reception. Note that in some markets, both VHF and UHF

channels are used for DTV broadcasts.

You can find out the latest DTV channel assignments for your area by browsing selected Internet web

sites such as wwv,,,.titantv.com, www. l O000wans.com, and www.fcc.gov.

2oHowdifJiceJtisit te receiveDTVsigeaJsindeers?

This depends on whether your local DTV stations are running full power or not and how dose your

location is to the transmission tower_ DTV receivers do not require as much signal as analog TV receivers to produce high-quality images and sound.

Once the DTV signal level exceeds a certain threshold at the receiver, the digital video and audio data

is decoded at the same quality it was originally encoded for broadcast. This is a big advantage for DTV over analog TV - there is no noise, ghosting, static, or scratchy audio.

The Federal Communications Commission's OTARD Rule (part of the Telecommunications Act of 19961

allows residents of condominiums, townhouse, or members of neighborhood associations to put up outside antennas for reception of broadcast TV signals as long as those antennas are not located in common areas and are no more than 12' in height.

Residents of rental units (apartments, etc.) are not covered by the OTARD rules and will have to use indoor antennas to receive DTV broadcasts. It is possible that the landlord of an apartment complex can provide broadcast DTV signals via a master TV antenna system to each apartment.

4o{anJcennectmy DTVset°tepreceiverte mycnbJeTVservice?

Cable TV systems use a different method for transmitting digital TV programs that is currently

incompatible with broadcast DTV set-top receivers. So you will still need to use an outdoor or indoor antenna to receive OTA broadcast DTV programs.

The good news is that you won't have to pay a monthly or per_program charge to watch OTA DTV and

HDTV programs. They're free, unlike subscription satellite TV or premium cable TV.AI! you need is an antenna and a DTV set-top receiver to enjoy clear, sharp widescreen images and high-quality audio.

TableofContents

GeneralInformation

Your New Plasma Display Panel.................... 10

Remote Control Buttons ................................ 13

Wail Installation Instructions .......................... 15

How to assemble the Stand-Base .................. 19

Connections

Connecting Connecting Connecting Connecting Connecting Connecting Connecting Connecting

Multimedia

Connecting Connecting Connecting

Operation

Turning the TV On and Off .......................... 36

Viewing the Menus and Displays .................. 40

Memorizing the Channels ............................ 41

Adding and Erasing Channels ...................... 44

Setting Up Your Remote Control .................... 47

Viewing an External Signal Source ................ 49

VHF and UHF Antennas .............. 22

Cable TV .................................. 23

CabIeCARD .............................. 25

a VCR ...................................... 26

a Camcorder ............................ 27

a DVD Player ............................ 28

a DTV Receiver .......................... 29

to HDMI (High Definition

Interface) .................................. 30

a Digital TV Set-Top Box .............. 31

a Digital Audio System .............. 32

to an Analog Amplifier .............. 33

PictureControl

Changing the Picture Standard .................... 52

Customizing the Picture Settings .................... 53

Viewing the DNle Demonstration .................. 55

Changing the Screen Size ............................ 56

Viewing the Picture-in-Picture ......................... 58

Selecting the Sound Source ......................... 64

Setting the My Color Control Mode ............... 65

SoundControl

Custornizing the Sound .............................. 70

Using Automatic Sound Settings ................... 71

Setting the TruSurround XT............................ 72

Choosing a Multi-Channel Sound (MTS) track

- Digital ...................................................... 73

Choosing a Multi-Channel Sound (MTS) track

- Analog .................................................... 74

Using the Auto Volume ................................ 75

Choosing a Digital Sound Format .................. 76

Setting the On/OFF Melody .......................... 77

Selecting the Internal Mute .......................... 78

ChannelControl

Selecting the Antenna .................................. 80

Selecting Your Favorite Channels .................. 81

Labeling the Channels .................................. 82

Viewing the Channel Lists ............................ 83

Editing the Channel Lists.............................. 84

Fine Tuning Analog Channels ...................... 85

Checking the Digital-Signal Strength .............. 86

LNA (Low Noise Amplifier) .......................... 87

Connectinga PCandOperation

Connecting a PC ........................................ 90

Changing the Position of the Image .............. 94

Picture Quality Adjustment ............................ 95

Image Reset................................................ 98

TimeSetting

Setting the Clock ...................................... 1O0

Setting the On/Off Timer ............................ 102

Setting the Sleep Timer .............................. 103

FunctionDescription

Selecting a Menu Language ...................... 106

Digital Noise Reduction .............................. 107

Selecting the Film Mode ............................ 108

Setting the Blue Screen .............................. 109

Using the Color Weakness Enhancement

Option .................................................... 110

Viewing Closed Captions (On-Screen

Text Messages) - Analog ............................ 111

Viewing Closed Captions (On-Screen

Text Messages) - Digital .............................. 112

Menu Transparency Level .......................... 114

Using the Energy Saving feature ................ 115

Preventing Screen Burn-in .......................... 116

Reducing the Effects of Screen Burn ............ 117

Setting the Function Help ............................ 118

Using the V-Chip ...................................... 119

Electronic Program Guide .......................... 125

Reminder List ............................................ 129

Appendix

Troubleshooting ........................................ 136

Care and Maintenance .............................. 137

Specifications ............................................ 138

Dimensions (HP-R4252) .............................. 139

Dimensions (HP-R5052) .............................. 141

• The information contained in this User's Manual is subject to change without prior

notice for improvement, and may vary depending on the version of the TV's software and the regional conditions.

Using the CableCARD ................................ 131

Using the CableCARD Setup Function .......... 132

? L A M A D J P L AY P A N E L

GeneralInformation

Your New Plasma Display Panel .................................................... 10

Remote Control Buttons ................................................................ 13

Wall Installation Instructions .......................................................... 15

How to assemble the Stand-Base.................................................... 19

YourNewPlasmaDisplayPanel

]-o

O SOURCEbutton

Pressto display all of the available video sources(TV,AV, S-Video,Component1, Component2, PC,and HDMI).

0 MENUbutton

Displays themain on-screenmenu.

0 VOL+, - buttons

Pressto increaseor decreasethe volume. Also usedto select or adjust itemson the

on-screenmenu.

O CH(A,'V) buttons

PressCHA or CHV to change channels. Also usedto move up or down in the on-screen

menu.

O _ (Enter)button

Pressto confirm a selection.

0 Power bull0n

Pressto turn the TV on and off. Power indicator

- Power Off : Blue

- Power On : Off

O RemoteControlSensor

Aim the remotecontrol towards this spot on the TV.

Q Speakers

Once you haveunpacked your TV,check to makesure that you have all the parts shown here. Ifany piece is missingor broken, call your dealer.

Owner's Instructions

Thefollowing parts are sold separately and are available at mostelectronicsstores.

S-VIDEOCable HDMI Cable

PCCable PCAudio Cable Optical Cable Coaxial Cable Antenna Cable

RemoteControl (BN59-00462A) / Power Cord Anynet Cable

AAA Batteries (3903-000144) (BN39-00518A)

HDMI/DVI cable

ComponentCables (RCA)

]]

0 POWERIN

Connect the supplied power cord.

0 SERVICEONLY

Connector for service only.

HDMI/DVIIN

Connect to the HDMI jack of a device with HDMI output. These inputs can also be used as a DVI connection with separate analog audio inputs. An optiona] HDMI/DVI cab]e will be necessary to make this connection. When using the optional HDMI/DVI adapter, the DVI analog audio inputs on your TV allow you to receive ]eft and right audio from your DVI device. (Not compatible with PC)

0 DVI AUDIO IN (L-AUDIO-R)

Connect to the DVI audio output jack of an external device.

PCIN

Connect to the video output jack on your PC.

PCAUDIOIN

Connect to the audio output jack on your PC.

OPTICALDIGITALAUDIOOUT

Connect to a Digital Audio component.

COAXIALDIGITALAUDIOOUT

Connect to a Digital Audio component.

Anynet

Please refer to the Anynet Owner's Instruction. This jack is for connecting to other Samsung Anynet-enabled devices.

COMPONENTIN 1, 2

Video (Y/PB/PR) and audio (L-AUDIO-R) component inputs.

CableCARDTM

Insertthe CableCARD into theslot.

ANT(75_)

75Q Coaxial connector for Antenna/Cable Network.

AVIN (L-AUDIO-R)

Audio inputs For external devices, such as a camcorder or VCR.

VIDEO

Video input for external devices, such as a camcorder or VCR.

S-VIDEO

Video input for external devices with an S-Video output, such as a camcorder or VCR.

AUDIOOUT

Audio outputs for external devices.

" Please be sure to match the color coded input terminals and cable jacks.

RemoteControlButtons

O POWERbutton

Turns the TV on and off.

0 GUIDEbutton

Press to display the on-screen Electronic Program Guide (EPG).

0 ANTENNAbutton

Press to select "Air" or "Cable".

O Numberbuttons O - button

Press to select additional channels (digital and analog) being broadcast by the same station. For example, to select channel

"54-3", press "54", then press "-" and "3".

Q MUTEbutton

Press to mute the TV sound.

O VOL(Volume)buttons

Use it to adjust volume.

Q Anynetbutton

Runs the Anynet view functions and sets up Anynet devices.

O MENUbutton

Displays the main on-screen menu.

@ ENTERbutton

Confirms a selection.

• FAV.CHbutton

Press to switch to your favorite channels.

_) CH LIST button

Displays the channel list.

_) MODEbutton

Selects a target device to be controlled by the Sarnsung remote control (i.e., TV, STB, VCR, CABLE, or DVD).

lid PRE-CHbutton

Tunes to the previous channel.

@ SOURCEbutton

Press to display all of the available video sources (TV,AV,S-VIDEO,

COMPONENT1, COMPONENT2, PC, and HDMI).

_) CH(Channel)buttons

Use it to switch channels.

_I INFObutton

Press to display information on the TV screen.

_) EXITbutton

Press to exit the menu.

@ Up/Down/Left/Rightbuttons

Control the cursor in the menu. Continued...

@ RJ_ODI:butt0.

Adjust the TV picture by selecting one of the preset factory settings (or select your personal, customized picture settings1.

@ S_MODEbutt0.

Select Sound effect.

@ E.SA?JNGbutt0.

Pressto adjust screen brightness according to surrounding environment. (Refer to page 115)

@ RSJZEbutta.

Select Picture size.

@ DNJebutt0.

Activates DNle (Digital Natural Image engine).

@ MI'Sbutt0.

Press to choose stereo, mono or Separate Audio Program (SAP broadcast).

@ SETbutt0.

Used during set up of this Samsung remote contrd, so that it will work compatibly with other devices (VCR, Cable Box and DVD).

@ PiPbutt0.

Activates picture in picture.

@ PiPcentrd Buttons

CH_},_D: Displays the available channels in sequence. (These buttons change channels in the PIP window only.)

@ @PTIONButt0.

Controls the caption decoder.

@ VCR,DVD€@.trdbutt0.s

Controls VCR tape or DVD disc functions: Stop, Rewind, Play/Pause, and Fast Forward.

@ RESETbutte.

If your remote control is not functioning properly, take out the batteries and press the reset button for about 2._3 seconds. Re-insert the batteries and try using the remote control again.

Slide the back cover to

open the battery

compartment of the remote

control.

Install two AAA size

batteries. Make sure to match the "+" and "-" ends

of the batteries with the diagram inside the

compartment.

Slide the cover back into

place.

RemoteControlOperationRange

You can use your remote control within a distance of 23 feet and an angle of 30 degrees from the left and right sides of the TV's remote control receiver.

WallInstallationInstructions

Refer to the correct installation guide according to your wall bracket.

InstallationNotes

Contact a technician for installing the wall bracket.

Samsung Electronics is not responsible for any damage to the product or injury to yourself

or others if you elect to perform the wall installation.

This product is for installing on cement walls. The product may not stay in place when

installed on plaster or wood.

Parts(Wallattachmentpanelissoldseparately.Checkwithyourdealer.)

Only use the components and accessories shipped with the panel.

WallBracket

Left: 1

Hinge

Right : 1

Accessories

Plastic Hanger : 4 Screw ® : 11

Screw _) : 4 Anchor : 11

HowtoassembletheWallMountBracket

Insert and tighten the Captive Screw in the direction of the arrow.

When done, mount the wall bracket on the wall.

Captive Screw

Hinge (Left)T!e __

(left and right). Use the

correct one.

I Hinge (Right)

Before drilling into the wall, check if the

length between the two locking holes at the back of the product is correct. If the length is too short or long, loosen all or

some of the 4 screws on the wall bracket to adjust the length.

Lengthbetweenthe twolockingholes

Check the installation diagram and

mark the drill points on the wall. Use the 5.0 mm bit to drill holes deeper

than 35 mm. Fix each anchor in the corresponding hole. Match each of the

brackets and hinge holes to the corresponding anchor holes and insert and tighten the 11 screws _).

FixingtheTVpaneltothewallattachmentpanelbracket

The shape of the product may vary depending on the model. (The assemblies of the plastic

hanger and the screw are the same)

Remove the 4 screws on the back of the product.

Insert the screw @ into the plastic hanger. (See the figure below)

• Mount the product on the wall bracket and make sure it is properly fixed to the left and right plastic hangers.

• Be careful when installing the product on the bracket as fingers can be caught in the holes.

• Make sure the wall bracket is securely fixed to the wall, or the product may nat stay in place after installation.

Tighten the 4 screws in step 2 (plastic

hanger + screw ®) to the rear holes of the product.

Remove safety pin (Q) and insert the 4

product holders into the corresponding

bracket holes (0). Then place the product (Q) so that it is firmly fixed to

the bracket. Make sure to reinsert and tighten the safety pin (Q) to securely

hold the product to the bracket.

PDP

Wall Bracket Wall

0 HowtoAdjustMountingAngle

Note : Adjust the bracket angle to -2° before installing it on the wall.

1. Fix the product to the wall bracket.

2. Hold the product at the top in the center and pull it forward (direction of the arrow) to adjust the angle.

(See the figure to the right)

3. You can adjust the bracket angle between -2° and 15°.

Make sure to use the top center, and not the left or the right side of

the product to adjust the angle.

HowtoassembletheStand-Base

Using the 4 screws for securing the stand pegs and the monitor, firmly attach the monitor

to the stand pegs. (The exterior of the set may be different than the picture.)

Warning

Firmly secure the stand to

the TV before moving it, as the stand may fall and

could cause serious injury.

TwoormorepeopleshouldcarrylheIV.NeverlaylheTVonlhefloorbecauseofpossibledamageIolhescreen. AlwaysslorelheIVupright.

PLASMA DISPLAY PANEL

Connections

Connecting VHF and UHF Antennas .............................................. 22

Connecting Cable TV.................................................................... 23

Connecting Cab]eCARD ................................................................ 25

Connecting a VCR........................................................................ 26

Connecting a Camcorder .............................................................. 27

Connecting a DVD Player.............................................................. 28

Connecting a DTV Receiver .......................................................... 29

Connecting to HDMI (High Definition Multimedia Interface) .............. 30

Connecting a Digital TV Set-Top Box .............................................. 31

Connecting a Digital Audio System ................................................ 32

Connecting to an Analog Amplifier ................................................ 33

ConnectingVHFandUHFAntennas

Antennaswith75-ohmRoundLeads

If your antenna looks like this: it has 75-ohm round leads.

Plug the antenna lead into the ANT 2 IN (AIR IN)

on the TV. Use an antenna cable. (Sold Separately)

ConnectingCable'IV

You can connect different cable systems to your TV, including cable without a Cable box, and cable with a Cable box that descrambles some or all channels.

CablewithoutaCableBox

Plug the incoming cable into the ANT 1 IN (CABLE IN)on the TV. Use an antenna cable. (Sold Separately)

CablewithaCableBoxthatDescramblesAllChannels

Find the cable connected to the ANTENNA OUT

terminal on your Cable box. This terminal might be labeled "ANT OUT", "VHF OUT" or simply "OUT".

Connect the cable to the ANT 1 IN (CABLE IN) onthe TV. Use an antenna cable. (Sold Separately)

CablewithaCableBoxthatDescramblesSome(ButNotAll)Channels

To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxial

cables (which you can buy from your Samsung dealer or any electronics store).

Find and disconnect the cable that is connected to the ANTENNA IN terminal

of your Cable box. This terminal might be labeled "ANT IN", "VHF IN" or

simply, "IN". Connect this cable to a two-way splitter.

Connect a coaxial cable between an

OUT terminal of the splitter and the IN terminal of the Cable box.

Connect a coaxial cable between the

ANTENNA OUT terminal of the Cable box and the B-IN terminal of the RF

(A/B) switch.

Incoming

Cable

Splitter

Cable Box

Incoming

Cable

Splitter

Cable Box

RF (A/B)

Switch

Connect a coaxial cable between the

other OUT terminal of the Cable box and the A-IN terminal of the RF (A/B)

switch. Incoming

Connect the last coaxial cable between

the OUT terminal of the RF (A/B) switch and the ANT 1 IN (CABLE IN)

on the TV.

After you've made this connection, set the A/B switch to the "A" position for normal viewing.

Set the A/B switch to the "B" position to view scrambled channels. (When you set the A/B switch to "B", you will need to tune your Set-Top Box to the Cable box's output channel, which is usually channel 3 or 4.)

Incoming

Cable

Splitter

Splitter RF (A/B)

Cable Box SwRch

Cable Box

RF (A/B)

Switch

ConnectingCableCARD

You must obtain a CoBleCARD from a local cable service provider.

Please insert the card as shown.

Insert the CabbCARD into the "CabbCARD" slot and the message "CabJeCARD Inserted" is displayed on the screen. If the channel information does not exist, the message "Updating

Channel List" is displayed during channel information configuration.

It could take several minutes to update the channel information depending on your cable

service provider.

The pairing information containing a telephone number, CableCARD ID, Host ID, and other

information will be displayed in about 2~3 minutes. If an error message is displayed, please

contact your service provider.

When the channel information configuration has finished, the message "Updating Completed"

is displayed, indicating that the channel list is now updated.

The Channel list can now be displayed by pressing CH LISTbutton.

/C0tes

• Once the channel list has been updated, only the channels on the channel list can be

selected.

• Remove the CabIeCARD by carefully pul]ing it out with your hands since dropping the CableCARD may cause damage to it.

ConnectingaVCR

ConnectingaVCRtotheVideoorS-Video/Audiojack

€

Power cord

Connect the Video/Audio cables between the VIDEO or S-VIDEO/AUDIO input jacks on the TV and VIDEO or S-VIDEO/AUDIO output jacks on the VCR.

(Note: For better video, use an S-Video cable.)

VCR

Audio cable

i Video cable

S-Video cable

• Please be sure to match the color coded input terminals and cable jacks.

VideotapePlayback:

1. Turn on your TV.

2. Press the SOURCE button to select "AV" or "S-Video".

3. Turn on your VCR, insert a videotape and press the Play button.

Connectinga Camcorder

Viewingcamc0rdertapes

€

Power cord

Connect a Video/Audio cable between the VIDEO or S-VIDEO/AUDIO input jacks on the TV and the VIDEO or S-VIDEO/AUDIO output jacks on the camcorder. (Note: For better video, use an S-VIDEO cable.)

Camcorder

or Video cable

S-Video cable

Note

• Please be sure to match the color coded input terminals and cable jacks.

ViewingTapes

1. Turn on your TV.

2. Pressthe SOURCE button to select "AV" or "S-Video".

3. Turn on your camcorder and set it to video mode. (For details, refer to your camcorder

owner's instructions.)

4. Insert the tape into the camcorder and press the Play button.

ConnectingaDVDPlayer(480i,480p)

PlayingDVD

Power cord

Component cable

Audio cable

Connect the Y, PB,PR(COMPONENT1, 2) input jacks on the TV to the Y, PB,PRoutput jacks on the DVD player using a component cable.

Connect the AUDIO L/R (COMPONENT1, 2) input jacks on the TV to the AUDIO output

jacks on the DVD player using a audio cable.

DVD Player

Note

• Please be sure to match the color coded input terminals and cable jacks.

ToPlayDVD:

1. Turn on your TV.

2. Pressthe SOURCE button to select "Component 1" or "Component 2".

3. Turn on your DVD player, insert a DVD disc and press the Play button.

• For an explanation of component video, see your DVD player's owner's instructions.

ConnectingaDTVReceiver(480p,720p,1080i)

This TV displays the optimum picture in 720p mode.

WatchingDTV

Power cord

Component cable

Audio cable

Connect the cable or antenna to the antenna input jack on the DTV.

DTV Receiver

HDMI/DVI cable

Connect the Y, PB,PR(COMPONENT1, 2) or HDMI input jack on the TV to the Y, PB,PRor

DVI output jacks on the DTV receiver using a component or HDMI/DVI cable.

Connect the AUDIO L/R (COMPONENT1, 2 or DVI AUDIO IN) input jacks on the TV with the AUDIO output jacks on the DTV receiver using an audio cable.

Note

• Please be sure to match the color coded input terminals and cable jacks.

ToWatchDTV:

1. Turn on your TV.

2. Turn on your DTV receiver.

• Far an explanation of component video, see your DTV receiver owner's instructions.

3. Pressthe SOURCE button to select "Component1", "Component2" or "HDMI'.

ConnectingtoHDMI(HighDefinition

MultimediaInterface)(480p,720p,1080i)

WatchingDTV

Power cord

HDMI cable

DTV Set-Top Box

0_ _ _ P:÷........I_ov'_

Connect the cable or antenna to the antenna input jack on the DTV.

Connect the HDMI input jack on the TV with the HDMI output jack on the DTV Set-Top Box using an HDMI cab]e.

Note

• Please make sure the HDMI source's power is on before selecting HDMI from the "Source List"

on the TV.

ToWatchDTV:

1. Turn on your TV.

2. Turn on your DTV receiver.

• For an explanation of HDMI video, see your DTV receiver owner's instructions.

3. Pressthe SOURCE button to select "HDMI".

+ 116 hidden pages