Samsung HPM5027 User Manual

BN68-00327A-00(ENG)
Owner’s Instructions
HPM5027
Thank you for choosing Samsung! Your new Samsung product represents the latest in television technol­ogy. We designed it with easy-to-use on-screen menus and closed captioning capabilities, making it one of the best products in its class. We are proud to offer you a product that will provide convenient, dependable service and enjoyment for years to come.
Important Safety Information
Always be careful when using your Monitor. To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your machine.
• Read all safety and operating instructions before operating your Monitor.
• Keep the safety and operating instructions for future reference.
• Heed all warnings on the Monitor and in the operating instructions.
• Follow all operating and use instructions.
• Unplug the Monitor from the wall outlet before cleaning. Use a damp cloth; do not use liquid or aerosol cleaners.
• Never add any attachments and/or equipment without approval of the manufacturer. Such additions can increase the risk of fire, electric shock, or other personal injury.
• Do not use the Monitor where contact with or immersion in water is a possibility, such as near bath tubs, sinks, washing machines, swimming pools, etc.
• Do not place the Monitor on an unstable cart, stand, tripod, bracket, table, or floor where it can fall. A falling Monitor can cause serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the Monitor. Follow the manufacturer's instructions when mounting the unit, and use a mounting accessory recommended by the manufacturer. Move the Monitor and cart with care. Quick stops, excessive force, and uneven surfaces can make the unit and cart unsteady and likely to overturn.
• Provide ventilation for the Monitor. The unit is designed with slots in the cabinet for ventilation to pro­tect it from overheating. Do not block these openings with any object, and do not place the Monitor on a bed, sofa, rug, or other similar surface. Do not place it near a radiator or heat register. If you place the Monitor on a rack or bookcase, ensure that there is adequate ventilation and that you've followed the manufacturer's instructions for mounting.
• Operate your Monitor only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your appliance dealer or local power company.
• Use only a grounded or polarized outlet. For your safety, this Monitor is equipped with a polarized alternating current line plug having one blade wider than the other. This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still does not fit, contact your electrician to replace your outlet.
Warning! Important Safety Instructions
32
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product.
This symbol alerts you that important literature concerning operation and maintenance has been included with this product.
Note to CATV system installer: This reminder is provided to call CATV system installer's attention to Arti­cle 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I), that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.
Caution: FCC/CSA regulations state that any unauthorized changes or modifications to this equipment may void the user's authority to operate it.
Caution: To prevent electric shock, match the wide blade of plug to the wide slot, and fully insert the plug.
Attention: pour eviter les chocs electriques, introduire la lame le plus large de la fiche dans la borne corre-
spondante de la prise et pousser jusqu'au fond.
Important: One Federal Court has held that unauthorized recording of copyrighted TV programs is an infringement of U.S. copyright laws.
Certain Canadian programs may also be copyrighted and any unauthorized recording in whole or in part may be in violation of these rights.
TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Thank You for Choosing Samsung
User Instructions
The Federal Communications Commission Radio Frequency Interference Statement includes the fol­lowing warning: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resi­dential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica­tions. However, there is no guarantee that interfer­ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter­mined by turning the equipment off and on, the user is encouraged to try to correct the interfer­ence by one or more of the following measures.
User Information
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. If necessary, consult your dealer or an experi­enced radio/television technician for additional suggestions. You may find the booklet called How to Identify and Resolve Radio/TV Interference Problems helpful. This booklet was prepared by the Federal Communications Commission. It is available from the U.S. Government Printing Office, Washington, DC 20402, Stock Number 004-000-00345-4 .
Warning
This is a Class B product. In a domestic environ­ment this product may cause radio interference in which case the user may be required to take ade­quate measures. User must use shielded signal interface cables to maintain FCC compliance for the product. Declaration of conformity for products marked with FCC Logo. This device complies with Part 15 of the FCC Rules. Operation is subject to the fol­lowing two conditions: (1) this device may not cause harmful interference,
and
(2) this device must accept any interference
received, including interference that may cause undesired operation.
The party responsible for product compliance: SAMSUNG ELECTRONICS CO., LTD America QA Lab of Samsung 3351 Michelson Drive, Suite #290, Irvine, CA 92612, U.S.A Tel) 949-975-7310 Fax) 949-975-7328 Provided with this monitor is a detachable power supply cord with IEC320 style terminations. It may be suitable for connection to any UL Listed personal computer with similar configuration. Before making the connection, make sure the volt­age rating of the computer convenience outlet is the same as the monitor and that the ampere rat­ing of the computer convenience outlet is equal to or exceeds the monitor voltage rating. For 110 Volt applications, use only UL Listed detachable power cord with NEMA configuration 5-15P type (parallel blades) plug cap. For 230 Volt applications use only UL Listed Detachable power supply cord with NEMA configuration 6015P type (tandem blades) plug cap.
IC Compliance Notice
This Class B digital apparatus meets all require­ments of the Canadian Interference-Causing Equipment Regulations of ICES-003.
Notice de Conformité IC
Cet appareil numérique de Classe B respecte toutes les exigences du Règlement ICES-003 sur les équipements produisant des interférences au Canada.
5
• Protect the power cord. Power supply cords should be routed so that they won’t be walked on or pinched by objects placed on or against them. Pay particular attention to cords at plugs, convenience recepta­cles, and the point where they exit from the unit.
• Unplug the Monitor from the wall outlet and disconnect the antenna or cable system during a lightning storm or when left unattended and unused for long periods of time. This will prevent damage to the unit due to lightning and power-line surges.
• Avoid overhead power lines. An outside antenna system should not be placed in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits. When installing an outside antenna system, be extremely careful to keep from touching the power lines or circuits. Contact with such lines can be fatal.
• Do not overload the wall outlet or extension cords. Overloading can result in fire or electric shock.
• Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or damage parts. Never spill liquid of any kind on the Monitor.
• Ground outdoor antennas. If an outside antenna or cable system is connected to the Monitor, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built­up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No.70-1984, provides infor­mation about proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
• Do not attempt to service the Monitor yourself. Refer all servicing to qualified service personnel. Unplug the unit from the wall outlet and refer servicing to qualified service personnel under the following condi­tions:
- when the power-supply cord or plug is damaged
- if liquid has been spilled on the unit or if objects have fallen into the unit
- if the Monitor has been exposed to rain or water
- if the Monitor does not operate normally by following the operating instructions
- if the Monitor has been dropped or the cabinet has been damaged
- when the Monitor exhibits a distinct change in performance
• If you make adjustments yourself, adjust only those controls that are covered by the operating instruc­tions. Adjusting other controls may result in damage and will often require extensive work by a qualified technician to restore the Monitor to normal.
• When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitu­tions may result in additional damage to the unit.
• Upon completion of any service or repairs to this Monitor, ask the service technician to perform safety checks to determine that the Monitor is in a safe operating condition.
• The PDP can properly operate in less than temperature 0~40˚C and humidity 80%. Do not use in a hot and humid place.
4
FCC Information
Setup
Your New Plasma Display Panel........................10
Remote Control Buttons ....................................12
Installing a rack on the PDP ..............................14
Turning the PDP On and Off..............................16
Connection (Connecting Speakers / Receiver)
Connecting Speakers ......................................20
Connecting a VCR/Cable Box ..........................21
Connecting a DVD/Set-Top Box ........................22
Picture Control
Customizing the Picture ....................................24
Using Automatic Picture Settings........................25
Viewing the Picture-in-Picture ............................26
Changing the Screen Size ................................29
Freezing the Picture..........................................30
Sound Control
Customizing the Sound ....................................32
Using Automatic Sound Settings ........................33
Using the Surround ........................................34
Time Setting
Setting the Clock ............................................36
Setting the Sleep Timer ....................................37
Setting the Timers ............................................40
Connecting PC and Operation
Connecting to a PC..........................................42
Adjusting the PC Screen ..................................46
Changing the Position of the Image....................47
Changing the Size of the Image ........................48
Enlarge of the Image (Zoom) ............................49
Move Expanded Picture....................................50
Picture Quality Adjustment................................51
Information ....................................................54
Power Saver (PC mode only) ............................55
Function Description
Selecting a Menu Language..............................58
Setting the Multi Control ..................................59
Using the Key Lock ..........................................60
Setting up Your Remote Control ........................61
Appendix
Troubleshooting ..............................................64
Care and Maintenance ....................................65
Specifications..................................................66
7
Important Warranty Information Regarding Television Format Viewing
Wide screen format PDP Displays (16:9,the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video.The images displayed on them should primarily be in the wide screen 16:9 ratio format,or expanded to fill the screen if your model offers this feature,and con­stantly moving.Displaying stationary graphics and images on screen,such as the dark side-bars on non­expanded standard format television video and programming,should be limited to no more than 5%of the total television viewing per week.
Additionally,viewing other stationary images and text such as stock market reports, video game displays,station logos,web sites or computer graphics and patterns,should be limited as described above for all televisions. Displaying any stationary images that exceed the above guidelines can
cause uneven aging of PDP Displays that leave subtle,but permanent burned-in ghost images in the PDP picture.To avoid this,vary the programming and images,and primari­ly display full screen moving images,not stationary patterns or dark bars.
On PDP models that offer picture sizing features,use these controls to view the different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven PDP aging as a result of format selection and use,as well as other burned-in images,is not covered by your Samsung limited warranty.
6
Table of Contents
User Instructions
Screen Image retention
Do not display a still image (such as on a video game or when hooking up a PC to this Monitor) on the plasma monitor panel for more than several minutes as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, refer to page 24 of this manual to reduce the degree of brightness and contrast of this screen when displaying a still image.
Cell Defect
The plasma display panel consists of fine cells. Although the panels are produced with more than 99.9 percent active cells, there may be some cells that do not produce light or remain lit.
Atmospheric Pressure Condition : 0.8~1.1 atmospheric pressure
This condition is concerned with the height in which the PDP can normally operate. Be sure of this condition when you use the PDP.
Warranty
Warranty Period: One year starting from the purchase of your Monitor. Warranty does not cover any damage caused by image retention.
PLASMA DISPLAY PANEL

Setup

Your New Plasma Display Panel ....................................................10
Remote Control Buttons ................................................................12
Installing a rack on the PDP ..........................................................14
Turning the PDP On and Off..........................................................16
Remote Control Signal Receiver
Aim the remote control towards this spot on the Monitor.
• SOURCE button
Press to display all of the available video sources (ie., Video, S-Video, Component1, Component2, PC ).
• MENU button
Displays the main on-screen menu.
• VOL(+,-) button
Press to increase or decrease the volume. Also used to adjust items on the on-screen menu.
• SELECT(▲,▼) button
Used to adjust items on the on-screen menu.
• POWER button
Press to turn the PDP on and off.
Swivel Stand
This stand turns left, right up to 25 degrees respectively so that you can adjust the angle while viewing.
Front Panel
11

Your New Plasma Display Panel

10
Rear Panel
ŒExternal Speaker Out jacks
Connect external speakers.
´RGB Input 1 jack (15pin)
Connect to the video output jack on your PC.
ˇRGB Input 2/Component Video Input jacks
(H/V/R/G/B, Y/P
b/Pr
)
RGB input2/Component video input jacks are BNC connectors.
¨Video Input jack
Connect a video signal from external sources like VCRs or DVD players.
ˆS-Video Input jack
Connect a S-Video signal from an S-VHS VCRs or DVD players.
ØAudio Input (Video/Component/PC) jacks
Connect a audio signal from external sources like VCRs, PC or DVD players.
RS-232C Input jack
Connect the input jack on RS-232C to your PC.
Power Input jack
Connect the included power cord.
Speakers
Checking Parts
Remote Control/
AAA Batteries
Owner’s
Instructions
S-Video Cable PC Cable
Power Cord Ferrite Cores (7EA)
Video/Audio
Cable
ıVCR control buttons
Controls VCR tape functions: Stop, Rewind, Play/Pause, Fast Forward.
˜SET button
Use during setting up of this remote control, so that it will work compatibly with other devices (VCR, cable box, DVD, etc.)
¯Clock set button
Press to clock setting.
˘PIP control buttons
Source : Press to select one of the available signal
sources for the PIP window. S.Sel : Press to select the Audio (PIP or Main). Locate : Press to move the PIP window to any of the
screen.
¿PC control buttons
Auto Adjust Scaling Zoom/Pan
¸S.Mode button
Adjust the PDP sound by selecting one of the preset factory settings (or select your personal, customized sound settings.)
˛Sleep button
Press to select a preset time interval for automatic shutoff.
13

Remote Control Buttons

ŒPower button
Turns the PDP on and off.
´Number buttons ˇDisplay button
Press to display information on the PDP screen.
¨Menu button
Displays the main on-screen menu.
ˆCH (Channel) and VOL (Volume) buttons
Channel and Volume buttons are used for selecting menu item in menu mode.
ØMute button
Press to mute the PDP sound.
P.Mode button
Adjust the PDP picture by selecting on of the preset fac­tory settings (or select your personal, customized pic­ture settings.)
Aspect button
Press to change the screen size.
Mode button
Selects a target device to be controlled by the samsung remote control (ie., VCR, Cable, or DVD players).
˝Clock Display button
Press to display clock on the PDP screen.
ÔSource button
Press to display all of the available video sources (ie., Video, S-Video, Component1, Component2, PC ).
Joystick button
Use to highlight on-screen menu items and change menu values.
ÒStill button
Press to pause the current screen.
ÚPIP button
Activates picture in picture.
ÆSource selection buttons
Press to directly select Video, S-Video, Component1, Component2 or PC.
12
Remote Control
Flip the cover open
in the arrow direction.
Installing the Batteries in Your Remote Control
1
Slide the back cover to open the battery compartment of the remote control
3
Slide the cover back into
place.
2
Install two AAA size batter­ies. Make sure to match the + and - ends of the bat­teries with the diagram inside the compartment.
Remote Control Operation Range.
You can use your remote control within a distance of 23 feet and an angle of 30 degrees from the left and right sides of the remote control receiver of the monitor.
S.Sel
15

Installing a rack on the PDP

14
1
Install the rack on the swivel stand using screws.
2
Fasten the cover of the rack using screws as shown in figure.
3
Use the screws to fix the groove of the stand pole and the groove on top of the rack.
4
After installing the PDP on the stand pole, fasten the
bottom using screws.
Displaying Status Information
Press the Display button on the remote control. The PDP will display the Screen size, Resolution, Current time, and screen mode.
Displaying Clock
Press the Clock Display button on the remote control. The Current time will be displayed on the screen.
17
Turning the Monitor(PDP) On and Off
T urning the Monitor(PDP) On and Off
Press the Power button on the remote control. The PDP will be turned on and you will be ready to use its features. You can also use the Power button on the front of the PDP.
Notes:
If your Monitor isnt turned on when the power button is pressed: Press the MODE button to check if the Monitor mode has been chosen ( ).
Viewing the Menus and Displays
Your PDP has a simple, easy-to-use menu system that appears on the PDP screen. This system makes it con­venient and fast to use features on the PDP. Your PDP also lets you display the status of many of your PDP’s features.
Viewing the Menus
1
With the power on, press the Menu button on the remote control. The main menu appears on the screen. The Video menu is selected.
2
Use the joystick (up, down) button to move items in the
menu. Use the joystick (left, right) button to display, change, or use the selected items. Use the joystick ( ) button to enter items in the menu. On screen menus disappear from the screen automatically after about thirty seconds, or you can press the Menu button on your remote control to exit the menu.
16
Select Contrast Brightness Sharpness Color Tint R 50
Move Enter Exit
VIDEO
Custom 100 50 50 50 G 50
DISPLAY
Main : Video SUB : Not Available P.MODE : Custom Scaling : Wide S.MODE : Custom Resolution : 720 X 480 60Hz
10 : 30 AM
PLASMA DISPLAY PANEL
Connection
(Connecting Speakers / Receiver)
Connecting Speakers....................................................................20
Connecting a VCR/Cable Box ......................................................21
Connecting a DVD/Set-Top Box ....................................................22
21

Connecting Speakers

20
Speaker Audio Cable
Connect the speaker audio cable to the external speaker output jack on the rear of the PDP matching the “+” and “-” ends of the cable with the diagram on the PDP.
You can attach the Ferrite Cores(supplied) to the both jacks of the Speaker audio cable.
How to Connect

Connecting a VCR/Cable Box

S-Video Cable
Audio Cable
Video Cable
Connect Video/S-Video cable between the Video/S-Video Output jack on the VCR/Cable box and the Video Input jack on the PDP.
• For better video, you can use a S-Video cable.
• You can attach the Ferrite Cores(supplied) to the both jacks of the Video cable. Simply set the Ferrite Cores right under the jacks.
Connect an Audio cable between the Audio Output jack on the VCR/Cable box and the Audio Input jack (Video) on the PDP.
Videotape Playback:
1. Turn on PDP and press the Video or S-Video(if S-Video jack is connected.) button on your remote control.
2. Turn on your VCR, insert a videotape and press the Play button.
• For an explanation of Component video, see your VCR/Cable Box owner’s instruction.
How to Connect
Power Plug
1
2
PLASMA DISPLAY PANEL

Picture Control

Customizing the Picture ................................................................24
Using Automatic Picture Settings ....................................................25
Viewing the Picture-in-Picture..........................................................26
Changing the Screen Size ............................................................29
Freezing the Picture ......................................................................30

Connecting a DVD/Set-Top Box

22
Audio Cable
Video (Y, P
b
, Pr) Cable
Power Plug
Connect a Video cable between the DVD/Set-Top Box (Y,Pb,Pr) Output jacks on the DVD/Set­Top Box and the Component1/2 Video Input (Y,Pb,Pr) Input jacks on the PDP.
• You can attach the Ferrite Cores (supplied) to the both jacks of the Video cable. Simply set the Ferrite Cores right under the jacks.
Connect an Audio cable between the Audio Output jack on the DVD/Set-Top Box and the Audio Input jack (Component) on the PDP.
To Play DVD:
1. Turn on PDP and press the Component button to select the Component1 mode.
2. Turn on your DVD, insert a Video CD and press the Play button.
To Watch DTV:
1. Turn on PDP and press the Component button to select the Component2 mode.
2. Turn on your DTV receiver.
• For an explanation of Component video, see your DVD/DTV receiver owner’s instructions.
How to Connect 1
2

Customizing the Picture

You can use the on-screen menus to change the Brightness, Contrast, Sharpness, Color, and Tint settings of your PDP.
25
1
Press the Menu button, then press the joystick to enter.
2
Move the joystick left or right to select the “Custom”, “Standard”, or “Mild” picture setting.
• You can select “High,” “Middle,” “Low,” or “Custom” in PC mode.
3
Press the Menu button to exit.

Using Automatic Picture Settings

Your PDP has automatic picture settings that allow you to adjust the video display easily.
24
1
Press the Menu button, then press the joystick to enter.
2
Move the joystick left or right to select the “Custom”. You will also see the items “Contrast”, “Brightness”,
“Sharpness”, “Color” and “Tint”.
3
Move the joystick up or down to select the item you wish to change.
4
Move the joystick left or right to change the value of the item.
5
Press the Menu button to exit.
Note
• In the PC mode, you can’t adjust the sharpness, color and tint.
Quick way to access the picture setting: Just press “P.Mode” on the remote control.
!
Select Contrast Brightness Sharpness Color Tint R 50
Move Adjust Exit
Select Contrast Brightness Sharpness Color Tint R 50
Move Adjust Exit
Select
Contrast
Brightness Sharpness Color Tint R 50
Move Adjust Exit
VIDEO
Custom
100 50 50 50 G 50
VIDEO
Custom
100 50 50 50 G 50
VIDEO
Custom
100 50 50 50 G 50
Select Contrast Brightness Sharpness Color Tint R 50
Move Adjust Exit
Select Standard
select Exit
VIDEO
Custom
100 50 50 50 G 50
VIDEO
Contrast 60

Viewing the Picture-in-Picture

27
Selecting an External Signal
You can use PIP to view a signal from an external source, such as a VCR.
1
Press the Menu button. Move the joystick up or down to select the “PIP”, then press the joystick to enter.
2
Move the joystick up or down to select the “Source”, then move the joystick left or right to
enter.
3
Move the joystick up or down to select an external signal, then move the joystick left or right.
The signal from these inputs will not appear if you have not connected any equipment to the PDP’s input jacks.
4
Press the Menu button to exit.
26
Selecting the PIPScreen
1
Press the Menu button. Move the joystick up or down to select the “PIP”, then press the joystick to enter.
2
Move the joystick left or right to select the “On”. The PIP image will appear in the corner of the screen.
3
Press the Menu button to exit.
Note
• The PIP function operates in only PC mode or Component2 mode.
Quick way to access the PIP: Just press “PIP” on the remote control.
!
Quick way to access the PIP source: Just press “Source” in the cover on the remote control.
!
Locate Source
PIP
PIP
Select Off
Move Enter Exit
Select On
Move Adjust Exit
Locate Source
Locate
Source
VIDEO
S-VIDEO COMPONENT 1
PIP
PIP
PIP
Select On
Move Adjust Exit
Select On
Move Adjust Exit
Move Exit
29
Wide
Sets the picture to 16:9 wide mode.
Panorama
Use this mode for the wide aspect ratio of a panoramic picture.
Zoom1
Magnify the size of the picture vertically on screen.
Zoom2
Magnify the size of the picture more than Zoom1.
Stretch
Moves the Zoom2 picture up a little to fully show the bottom. Use this picture size if you want to view Zoom2 picture along with cap­tions when watching movies.
4:3
Sets the picture to 4:3 normal mode. This is a standard PDP screen size.

Changing the Screen Size

(When entering the Video mode)
Note
• In VIDEO, S-VIDEO, Component1 mode, all screen modes can be selected. (Wide Panorama Zoom1 Zoom2 Stretch 4:3).
When you press the Aspect button on the remote control, the PDP’s screen mode should appear in sequence. The screen displays in this order: Wide, Panorama, Zoom1, Zoom2, Stretch, 4:3.
Note
• If you watch a still image or the 4:3 mode for a long time, image may be burned onto the screen, view the monitor in wide mode or panorama mode as possible.
28
Changing the Location of the PIP Image
1
Press the Menu button. Move the joystick up or down to select the “PIP”, then press the joystick to enter.
2
Move the joystick up or down to select the “Locate”.
3
Move the joystick to move the PIP screen where you want.
4
Press the Menu button to exit.
Quick way to access the PIP location: Just press “Locate” on the remote control.
!
Locate Source
Locate
Source
PIP
PIP
PIP
Select On
Move Adjust Exit
Select On
Move Adjust Exit
Adjust Exit
Caption

Freezing the Picture

30
Still
Press the Still button on the remote control to freeze a mov­ing picture into a still one. Press again to cancel.
PLASMA DISPLAY PANEL

Sound Control

Customizing the Sound ................................................................32
Using Automatic Sound Settings ....................................................33
Using the Surround ......................................................................34
33

Customizing the Sound

32
1
Press the Menu button. Move the joystick up or down to select the AUDIO, then press the joystick to enter.
2
Move the joystick left or right to select the Custom”, Standard, Music, Movie or Speech sound
setting.
3
Press the Menu button to exit.
Note
The Automatic Sound Setting function doesnt operate in PC mode.

Using Automatic Sound Settings

1
Press the Menu button. Move the joystick up or down to select the AUDIO, then press the joystick to enter.
2
Move the joystick left or right to select the Custom”. You will also see the items Treble, Bass,
Balance and Surround.
3
Move the joystick up or down to select the item you wish to change.
4
Move the joystick left or right to change the value of the item.
5
Press the Menu button to exit.
Quick way to access the sound setting: Just press S.Mode on the remote control.
!
SOUND
Select Treble Bass Balance Surround Off
Move Adjust Exit
Select Treble Bass Balance Surround Off
Move Adjust Exit
Select
Treble
Bass Balance Surround Off
Move Adjust Exit
Custom
50 50 0
SOUND
Custom
50 50 0
SOUND
Custom
50 50 0
SOUND
Select Treble Bass Balance Surround Off
Move Adjust Exit
Select Balance Surround Off
Move Adjust Exit
Custom
50 50 0
SOUND
Standard
0
Treble 60
PLASMA DISPLAY PANEL

Time Setting

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Setting the Timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Using the Surround

34
1
Press the Menu button. Move the joystick up or down to select the AUDIO, then press the joystick to enter.
2
Move the joystick up or down to select the Surround, then move the joystick left or right
to select the Concert, Hall or Stadium.
3
Press the Menu button to exit.
SOUND
Select Treble Bass Balance Surround Off
Move Adjust Exit
Select Treble Bass Balance
Surround Concert
Move Adjust Exit
Custom
50 50 0
SOUND
Custom
50 50 0

Setting the Clock

37
You can set your PDP to automatically turn off after a preset interval.
1
Press the Menu button. Move the joystick up or down to select TIME, then press the joystick to enter.
2
Move the joystick up or down to select the Sleep”, then move the joystick left or right.
3
Move the joystick up or down to select the time inter­val for the PDP to stay on. The interval ranges from
10 to 360 minutes.
4
Press the Menu button to exit.

Setting the Sleep Timer

36
This PDP has a built-in clock that will appear on screen when you press the Clock Display button on the remote control. Setting this clock also allows you to use it to automatically turn the PDP On or Off.
1
Press the Menu button. Move the joystick up or down to select the TIME, then press the joystick to enter.
2
Move the joystick left or right to select hour, then move the joystick up or down to select the correct
hour.
3
Move the joystick left or right to select minute, then move the joystick up or down to select the correct
minute.
4
Move the joystick left or right to select AM, then Move the joystick up or down to select AM or
PM”.
If you want to display the Clock on screen, move
the joystick down to select Clock Display, then move the joystick right.
5
Press the Menu button to exit.
Quick way to access the sleep timer: Just press Sleep on the remote control.
!
Quick way to access the clock display: Just press Clock Display on the remote control.
!
Clock
On time Off time On time volume Sleep Timer Clock Display
Move Adjust Exit
Clock On time Off time On time volume Sleep Timer Clock Display
Adjust Move Exit
Clock On time Off time On time volume Sleep Timer Clock Display
Adjust Move Exit
Clock On time Off time On time volume Sleep Timer Clock Display
Adjust Move Exit
TIME
12 : 00 AM 12 : 00 AM Off 12 : 00 AM Off 10 Off
TIME
10 : 00 AM
12 : 00 AM Off 12 : 00 AM Off 10 Off
TIME
10 : 30 AM 12 : 00 AM Off 12 : 00 AM Off 10 Off
TIME
10 : 30 AM 12 : 00 AM Off 12 : 00 AM Off 10 Off
Clock
On time Off time On time volume Sleep Timer Clock Display
Move Adjust Exit
Clock On time Off time On time volume
Sleep Timer
Clock Display
Move Adjust Exit
Clock On time Off time On time volume Sleep Timer Clock Display
Adjust Move Exit
TIME
12 : 00 AM 12 : 00 AM Off 12 : 00 AM Off 10 Off
TIME
10 : 30 AM 12 : 00 AM Off 12 : 00 AM Off 10 Off
TIME
10 : 30 AM 12 : 00 AM Off 12 : 00 AM Off 10 10 Min.

Setting the Timers

39
6
Move the joystick up or down to select Off, then move the joystick left or right to select On”.
7
If you want to set the Off Time, move the joystick down to select the Off Time”.
Set the Off Time just as you set the On Time”.
If you want to set the volume level when the PDP turns on, move the joystick down to select On time volume. Move the joystick right to set the volume level you want when the PDP turns on.
8
Press the Menu button to exit.
38
This PDP can be set to turn on or off automatically at specific times that you choose. Before using the timers, you must set the PDPs clock, as described previously.
Setting the On/Off Timer
1
Press the Menu button. Move the joystick up or down to select the TIME, then press the joystick to enter.
2
Move the joystick up or down to select the On time, then move the joystick left or right.
3
Move the joystick left or right to select hour, then move the joystick up or down to select the correct
hour.
4
Move the joystick left or right to select minute, then move the joystick up or down to select the correct
minute.
5
Move the joystick left or right to select AM, then move the joystick up or down to select AM or
PM.
Clock
On time Off time On time volume Sleep Timer Clock Display
Move Adjust Exit
Clock
On time
Off time On time volume Sleep Timer Clock Display
Move Adjust Exit
Clock On time Off time On time volume Sleep Timer Clock Display
Adjust Move Exit
TIME
12 : 00 AM 12 : 00 AM Off 12 : 00 AM Off 10 Off
TIME
10 : 30 AM 12 : 00 AM Off 12 : 00 AM Off 10 Off
TIME
10 : 30 AM 6 : 00 AM Off 12 : 00 AM Off 10 Off
Clock On time Off time On time volume Sleep Timer Clock Display
Adjust Move Exit
Clock On time
Off time
On time volume Sleep Timer Clock Display
Move Adjust Exit
TIME
10 : 30 AM 6 : 30 AM On 12 : 00 AM Off 10 Off
TIME
10 : 30 AM 12 : 00 AM Off 12 : 00 AM Off 10 Off
Clock On time Off time On time volume Sleep Timer Clock Display
Adjust Move Exit
Clock On time Off time On time volume Sleep Timer Clock Display
Adjust Move Exit
TIME
10 : 30 AM 6 : 30 AM Off 12 : 00 AM Off 10 Off
TIME
10 : 30 AM 6 : 30 AM Off 12 : 00 AM Off 10 Off
PLASMA DISPLAY PANEL

Connecting PC and Operation

Connecting to a PC ......................................................................42
Adjusting the PC Screen................................................................46
Changing the Position of the Image ................................................47
Changing the Size of the Image ....................................................48
Enlarge of the Image (Zoom)..........................................................49
Move Expanded Picture ................................................................50
Picture Quality Adjustment ............................................................51
Information..................................................................................54
Power Saver (PC mode only)..........................................................55
Pin Configuration
• 15Pin Signal Cable (based on protruded pin)
Setting up Your Monitor Plug and Play
Our adoption of the new VESAPlug and Play solution eliminates complicated and time consuming setup. It allows you to install your monitor in a Plug and Play compatible system without the usual hassles and confusion. Your PC system can easily identify and configure itself for use with your display. This monitor automatically tells the PC system its Extended Display Identification data (EDID) using Display Data Channel (DDC) protocols so the PC system can automatically configure itself to use the flat panel display.

Connecting to a PC

This PDP set is not compatible with Macintosh PC.
4342
Connect a PC (15pin) or BNC cable between the Video Output jack on the PC and the RGB1 (15p D-SUB) or RGB2 on the PDP.
• You can attach the Ferrite Cores to each jack of the BNC cable.
• For an explanation of Component video, see your PC owner’s instruction. Connect a Audio cable between the Audio Output jack on the PC and the Audio Input (PC) on the PDP.
To watch the PC screen:
1. Turn on PDP and press the RGB button to select the PC mode.
2. Turn on PC and check for PC system requirements. (Refer to pages 42 and 43 for PC system requirements.)
3. Adjust the PC screen. (Refer to page 44.)
Connecting a PC to the PDP
PC (15pin)
Cable
BNC
Cable
Audio Cable
Power Plug
1
2
4544
How to Set up Your Display Setting (Windows only)
Notes:
The plasma panel of this monitor is composed 1366 pixels & 768 lines. That is, the best resolution of this monitor is 1366 X 768.
Thus, select 1366 X 768 resolution in same way as below when you control the display setting, If your video card does not support 1366 X 768 resoution, the resolution of 1024 X 768 is recommended. If you select one of resolutions above, you can use this monitor in best condition.
The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.
On the windows screen, select in the following sequence : Start Settings ➝ Control Panel.
When the control panel screen appears, click on “Display” and a display dialog-box will appear.
Select the “Settings” tab in the display dialog-box.
The two key variables that apply the PDP-PC inter­face are “resolution” and “colors.” The correct set­tings for these two variables are:
• Size (sometimes called “resolution”): 1024 x 768 pixels.
• Color: “24-bit” color (might also be expressed as “16 million colors”)Shown at left is a typical screen for “Display” dialog box.
If a vertical-frequency option exists on your dis­play settings dialog box, the correct value is “60” or “60 Hz.” Otherwise, just click “OK” and exit the dialog box.
Continued...
Notes:
Both screen position and size will vary, depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported:
(N: Negative / P: Positive)
• The PDP might operate abnormally if a non-standard video format is selected.
• When this PDP is used as a PC display, 24-bit color is supported (over 16 million colors).
• Your PC display screen might appear different depending on the manufacturer (and your particular version of Windows).
Check your PC instruction book for information about connecting your PC to a PDP.
• If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5kHz (horizontal).
• In some cases, abnormal signals (such as stripes) might appear on the screen when the PC power is turned off (or if the PC is disconnected). If so, press the Source button to enter the VIDEO mode. Also, make sure that the PC is connected.
• Connect only a PC monitor to the monitor output port while viewing the PC screen. (Otherwise, random signals might appear).
* This mode is only supported by a particular video card(PIXEL PERFECT made by IMAGINE
GRAPHICS Ltd.).
Video signal Dot X Line
640 X 350
640 X 400 720 X 400
640 X 480
IBM PC / AT
Compatibler
848 X 480
800 X 600
1024 X 768
1152 X 864
1280 X 768
(W-XGA)
1280 X 1024
1366 X 768*
Vertical
Frequency (Hz)
70.086
85.080
85.080
70.087
85.039
59.940
72.809
75.000
85.008
60.000
72.000
75.000
85.000
56.250
60.317
72.188
75.000
85.061
60.004
70.069
75.029
84.997
75.000
60.000
75.000
60.020
75.025
60.000
Horizontal
Frequency (kHz)
31.469
37.861
37.861
31.469
37.927
31.469
37.861
37.500
43.269
29.838
35.156
36.072
37.650
42.925
37.879
48.077
46.875
53.674
48.363
56.476
60.023
68.677
67.500
47.700
60.150
63.981
79.976
48.200
Vertical polarity
N N
P P
P N N N N
P
P
P
P
N/P
P
P
P
P N N
P
P
P
P
P
P
P N
Horizontal
polarity
P
P N N N N N N N N N N N
N/P
P
P
P
P N N
P
P
P N N
P
P N
47
After connecting the PDP to your PC, adjust the position of screen if it is not well-aligned.
Preset:
Press the RGB button to select the PC mode.
1
Press the Menu button. Move the joystick up or down to select the SETUP, then press the joystick to enter.
2
Move the joystick left or right to select the Posi­tion, then adjust the position of screen by using the
joystick button.
3
Press the Menu button to exit.
46
Adjusting the R.G.B
Preset:
Press the RGB button to select the PC mode.
1
Press the Menu button, then press the joystick to enter.
2
Move the joystick up or down to select the Color Control, then move the joystick left or right to enter.
3
Move the joystick up or down to select the item you want to change.
4
Move the joystick right or left to change the value of the item, using the on-screen gauge as your guide.
5
Press the Menu button to exit.

Adjusting the PC Screen

Changing the Position of the Image

VIDEO
Select Contrast Brightness Color Control
Move Adjust Exit
Select Contrast Brightness
Color Control
Move Adjust Exit
R
G
B
Custom
100 50
VIDEO
Custom
100 50
VIDEO
Position
Language English Scaling Wide Zoom/Panning Image Lock Miscellaneous
Move Adjust Exit
Adjust Exit
50
50
50
Move Adjust Exit
VIDEO
R
G
B
Move Adjust Exit
70
50
50
49
Preset:
Press the RGB button to select the PC mode.
1
Press the Menu button. Move the joystick up or down to select the SETUP, then press the joystick to enter.
2
Move the joystick up or down to select the Zoom/Panning, then move the joystick left or right
to enter.
3
Move the joystick left or right to enlarge the image.
The picture can be expanded 1 to 10 in Zoom mode.
4
Press the Menu button to exit.
48
Preset:
Press the RGB button to select the PC mode.
1
Press the Menu button. Move the joystick up or down to select the SETUP, then press the joystick to enter.
2
Move the joystick up or down to select the Scal­ing, then move the joystick left or right to select the
Wide or 4:3.
3
Press the Menu button to exit.

Changing the Size of the Image

Enlarge of the Image (Zoom)

Quick way to access the Zoom: Just press Zoom/Pan on the remote control.
!
Quick way to access the Size: Just press Scaling on the remote control.
!
Position
Language English Scaling Wide Zoom/Panning Image Lock Miscellaneous
Move Adjust Exit
Position Language English
Scaling Wide
Zoom/Panning Image Lock Miscellaneous
Move Adjust Exit
Position
Language English Scaling Wide Zoom/Panning Image Lock Miscellaneous
Move Adjust Exit
Position Language English Scaling Wide
Zoom/Panning
Image Lock Miscellaneous
Move Adjust Exit
Zoom 5
Panning
Move Adjust Exit
51
Picture Automatic Adjustment On/Off
Preset:
Press the RGB button to select the PC mode.
1
Press the Menu button. Move the joystick up or down to select the SETUP, then press the joystick to enter.
2
Move the joystick up or down to select the Image Lock, then move the joystick left or right to enter.
3
Move the joystick up or down to select Auto
Adjust, then move the joystick left or right. The message Auto in progress shows on the screen and the picture adjustments are automatically activated.
4
Press the Menu button to exit.
50
Preset:
Press the RGB button to select the PC mode.
1
Press the Menu button. Move the joystick up or down to select the SETUP, then press the joystick to enter.
2
Move the joystick up or down to select the Zoom/Panning, then move the joystick left or right
to enter.
3
Move the joystick up or down to select the Pan-
ning, then move the joystick left or right to enter. Adjust the position of screen by using the joystick button.
The Panning feature operates only when the pic
ture is expanded.
4
Press the Menu button to exit.

Move Expanded Picture

Picture Quality Adjustment

Quick way to access the Zoom: Just press Zoom/Pan on the remote control.
!
Quick way to access the Auto Adjust: Just press Auto Adjust. on the remote control.
!
Position
Language English Scaling Wide Zoom/Panning Image Lock Miscellaneous
Move Adjust Exit
Position Language English Scaling Wide
Zoom/Panning
Image Lock Miscellaneous
Move Adjust Exit
Zoom 5
Panning
Move Adjust Exit
Position
Language English Scaling Wide Zoom/Panning Image Lock Miscellaneous
Move Adjust Exit
Position Language English Scaling Wide Zoom/Panning
Image Lock
Miscellaneous
Move Adjust Exit
Auto Adjustment
Frequency 0 Phase 0
Adjust Exit
Move Adjust Exit
53
Fine T uning (Phase)
Preset:
Press the RGB button to select the PC mode.
1
Press the Menu button. Move the joystick up or down to select the SETUP, then press the joystick to enter.
2
Move the joystick up or down to select the Image Lock, then move the joystick left or right to enter.
3
Move the joystick up or down to select the Phase”.
Remove picture noise (vertical stripes) on the screen by moving the joystick left or right. (If phase is not set properly, the picture may be blurry.)
4
Press the Menu button to exit.
52
Frequency Adjustment
Preset:
Press the RGB button to select the PC mode.
1
Press the Menu button. Move the joystick up or down to select the SETUP, then press the joystick to enter.
2
Move the joystick up or down to select the Image
Lock, then move the joystick left or right to enter.
3
Move the joystick up or down to select the Frequen-
cy”. Remove picture noise (vertical stripes) on the screen
by moving the joystick left or right. (If frequency is not set properly, the vertical stripes will appear on the screen.)
4
Press the Menu button to exit.
Position
Language English Scaling Wide Zoom/Panning Image Lock Miscellaneous
Move Adjust Exit
Position Language English Scaling Wide Zoom/Panning
Image Lock
Miscellaneous
Move Adjust Exit
Auto Adjustment
Frequency 0
Phase 0
Move Adjust Exit
Position
Language English Scaling Wide Zoom/Panning Image Lock Miscellaneous
Move Adjust Exit
Position Language English Scaling Wide Zoom/Panning
Image Lock
Miscellaneous
Move Adjust Exit
Auto Adjustment Frequency 0
Phase 0
Move Adjust Exit
Frequency 50
Phase 50
5554
Preset:
Press the RGB button to select the PC mode.
1
Press the Menu button. Move the joystick up or down to select the SETUP, then press the joystick to enter.
2
Move the joystick up or down to select the Miscel-
laneous, then move the joystick left or right to enter.
3
Move the joystick up or down to select the Informa-
tion, then move the joystick left or right to enter.
4
Press the Menu button to exit.

Information Power Saver (PC mode only)

This monitor has a built-in power management system called Power Saver. This power management system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. This power management system operates with a VESA DPMS compliant video card installed in your computer. You use a software utility installed on your computer to set up this fea­ture. See the table below for details.
Table 1. Power-saving modes
Notes:
This monitor automatically returns to normal operation when horizontal and vertical sync return.
This occurs when moving the computers mouse or pressing a key on the keyboard.
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattend-
ed for long periods.
Position
Language English Scaling Wide Zoom/Panning Image Lock Miscellaneous
Move Adjust Exit
Position Language English Scaling Wide Zoom/Panning Image Lock
Miscellaneous
Move Adjust Exit

Information

Multi Control Key Lock Off
Move Adjust Exit
Power-saving Function Mode
Suspend Mode
Position A1
Active Inactive Blanked Amber Blinking (1 sec Interval)
Power-off Mode
Position A2
Inactive Inactive Blanked Amber Blinking (1 sec Interval)
State
Horizontal Sync Vertical Sync Video Power Indicator
Normal
Operation
Active Active Active Green
Standby Mode
Inactive Active Blanked Amber Blinking (1 sec Interval)
Resolution Frequency
Horizontal Vertical 1024 768
48.3KHz 60Hz
Exit
Selecting a Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Setting the Multi Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Using the Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Setting up Your Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . .61
PLASMA DISPLAY PANEL

Function Description

Selecting a Menu Language

5958

Setting the Multi Control

1
Press the Menu button. Move the joystick up or down to select the “SETUP”, then press the joystick to enter.
2
Move the joystick left or right to select the appropri-
ate language: English, Spanish, or French.
3
Press the Menu button to exit.
1
Press the Menu button. Move the joystick up or down to select the “SETUP”, then press the joystick to enter.
2
Move the joystick up or down to select the “Multi Control”, then move the joystick left or right to enter.
3
Enter ID setup number. The ID Setup operates by using only the joystick or channel up/down buttons.
4
Move the joystick up or down to select the “ID Input”, The ID Input operates by using only the numeric buttons.
5
Enter ID Input and the screen with the set ID number will be switched to the Menu screen.
Note
• To operate the multi control function, PDP1 and PDP2 should be set in the ID Setup mode. When entering the ID Input number of PDP1 while the PDP is set in the ID Input mode, only PDP1 is switched to the Menu screen and you can operate the remocon. At this time, PDP2 doesn't operate with the remocon and displays the standby mode of ID Input. (See the figure of step 4.)
SETUP
Language English
Multi Control Key Lock Off
Move Adjust Exit
SETUP
Language English
Multi Control Key Lock Off
Move Adjust Exit
SETUP
Language English
Multi Control
Key Lock Off
Move Adjust Exit
SETUP
ID Setup 0 1
ID Input _ _
Move Adjust Exit
SETUP
ID Setup 0 1
ID Input 0 1
Move Adjust Exit
This PDP's remote control can operate almost any VCR, cable box, or DVD. After it has been set up properly, your remote control can operate in four different modes: VCR, Cable, or DVD. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose.
Note:The remote control might not be compatible with DVD Player, VCR, Cable box and others manu­factured by another company.
Setting Up the Remote to Operate Your VCR, Cable box, or DVD players
1
Turn off your VCR. (or Cable box, DVD players.)
2
Press the MODE button and make sure that the VCR (or Cable box, DVD) LED is illuminated.
3
Press the Set button on your PDP's remote control.
4
Using the number buttons on your remote control,
enter three digits of the VCR (or Cable box, DVD) code listed on page 64 of this manual for your brand of VCR (or Cable box, DVD players). Make sure you enter three digits of the code, even if the first digit is a "0". (If more than one code is listed, try the first one.)
5
Press the Power button on the remote control.
Your VCR (or Cable box, DVD players) should turn on if your remote is set up correctly. If your VCR (or Cable box, DVD players) does not turn on after set up, repeat steps 2, 3, and 4, but try one of the other codes listed for your brand of VCR (or Cable box, DVD players). If no other codes are listed, try each code, 000 through 089 (or Cable box: 0000 through 077, DVD players: 000 through 008).
Notes
• When your remote control is in “VCR” mode, the VCR control buttons (Stop, REW, Play/Pause, FF) still operate your VCR.
• When your remote control is in “Cable box” or “DVD” mode, the VCR control buttons (Stop, REW, Play/Pause, FF) still operate your VCR.
6160

Using the Key Lock

When setting Key Lock ON, the buttons (SOURCE, MENU, VOLUME, SELECT, MUTE, POWER) on the front of the PDP don’t operate. But those buttons will operate when setting Key Lock OFF.
1
Press the Menu button. Move the joystick up or down to select the “SETUP”, then press the joystick to enter.
2
Move the joystick up or down to select the “Key Lock”, then move the joystick left or right to select
“On” or “Off”.
3
Press the Menu button to exit.

Setting up Your Remote Control

Language English
Multi Control Key Lock Off
Move Adjust Exit
Language English Multi Control
Key Lock On
Move Adjust Exit
SETUP
SETUP
S.Sel
PLASMA DISPLAY PANEL

Appendix

Troubleshooting............................................................................64
Care and Maintenance ................................................................65
Specifications ..............................................................................66
62
Remote Control Codes
VCR Codes
Cable Box Codes
DVD Codes
6564

Troubleshooting

Problem
Poor picture.
The power indicator is amber blinking.
Your Remote control does not operate the monitor.
The monitor wont turn on.
There is no screen image.
The image is too light or too dark.
The image is too large or too small.
Only the message "Check Temp" blinks on the screen and then the picture switches OFF.
Only the message "Check Fan blinks on the screen and then the picture switches OFF.
Before you call a service technician, please scan this list of problems and possible solutions. It may save you time and money.
Possible Solution
Check all wire connections.
The monitor is using its power management system. Check the power management utility on your computer.
Press the Mode button to put your remote control in the Monitor mode.
Make sure the wall outlet is working.
Check to see that both the monitor and the source are plugged in and turned on.
Adjust the Brightness or Contrast settings.
Adjust the Size settings.
The PDP is overheated. Power off the PDP and cool it for a while.
The cooling fan of the PDP may have a problem. Contact an authorized service center.
With proper care, your PDP will give you many years of service. Please follow these guidelines to get the maximum performance from your PDP.
Identifying Problems
Do not put the PDP near extremely hot, cold, humid or dusty places.
Do not put the PDP near appliances that create magnetic fields.
Keep the ventilation openings clear.
Do not place the PDP on a rough and slanted surface, such as cloth or paper.
Liquids
Do not handle liquids near or on the PDP.
Cabinet
Never open the cabinet or touch the parts inside.
Wipe your PDP with a clean, dry cloth. Never use water, cleaning fluids, wax, or chemicals.
Do not put heavy objects on top of the cabinet.
Temperature
If your PDP is suddenly moved from a cold to a warm place, unplug the power cord for at least two hours so that moisture that may have formed inside the unit can dry completely.

Care and Maintenance

6766

Specifications

Exterior design and product specifications are subject to change without prior notice to improve the performance of this product.
This PDP applies to Class B digital device. (Note: Class B system is for home use.) This PDP has been accepted as a device with proper electrowave and you can use this PDP not only in a residential area but other areas.
HPM5027 (Type No. : SM50PN)
1300 (W) X 95 (D) X 837 (H) mm ; 51.18 (W) X 3.58 (D) X 32.95 (H) inches
1300 (W) X 160 (D) X 530.6 (H) mm ; 51.18 (W) X 6.30 (D) X 20.89 (H) inches
54 (W) X 31.5 (D) X 220 (H) mm ; 2.13 (W) X 1.24 (D) X 8.66 (H) inches
46kg ; 101.41lbs
32kg ; 70.55lbs
150g (including batteries) ; 0.33lbs
120V~, 60 Hz
540 Watts
1106.5(H) x 622(V) mm ; 43.56 x 24.49 RGB1 : MINI D-SUB 15P
RGB2 : BNC (R/G/B H(CS)/V)
VIDEO : ANALOG 0.714V
p-p
/ 75(T erminated)
SYNC(H,V)
VIDEO : 1.0V
p-p
/ 75(BNC)
S-VIDEO : Y 1.0V
p-p
/ 75
C 0.28V
p-p
/ 75
COMPONENT (Y/Pb/Pr) : Y → 1.0V
p-p
/ 75
P
b
0.7V
p-p
/ 75
P
r
0.7V
p-p
/ 75
Model Dimensions Display
Stand Remote Control
Weight Display
Stand
Remote Control Voltage Power Consumption Screen Size RGB input
VIDEO input
Memo
Loading...