Samsung HMX-Q200 TN, HMX-QF20 BN, HMX-Q20 BN, HMX-Q20 TN, HMX-Q20 RN User Manual

...
R
ANUAL
HMX-Q20BN/HMX-Q20TN/HMX-Q20RN HMX-Q200BN/HMX-Q200TN/HMX-Q200RN
HMX-QF20BN
www.samsung.com/register
For video recording, use a memory card that supports faster write speeds.
- Recommended Memory Card: 6MB/s (Class 6) or above.
Important safety instructions
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
Warning
To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or Moisture.
Caution
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
DO NOT REMOVE COVER (OR BACK).
SERVICE PERSONNEL.
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Operate in accordance
with the manufacturer’s instructions.
8 Do not place near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched
particularly at the plug, at wall outlets, and at the point where the cord exits from the apparatus.
11 Only use attachment/accessories specified by the manufacturer.
12 Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tipover.
13 Unplug this apparatus during lightning storms or when you leave
it unused for long periods of time.
ii
Important safety instructions
14 Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such as when the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15 Do not expose this apparatus to dripping or splashing. Do not
put objects filled with liquid, such as a vase, on this apparatus.
16 VENTILATION:
Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the CAMCORDER and to protect it from overheating. These openings must not be blocked or covered. Never place your CAMCORDER on a bed, sofa, rug, or other similar surface or on or near a radiator or heat register. This CAMCORDER should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
17 POWER SOURCES:
Operate the CAMCORDER using only the types and sources of power indicated on the label. If you are not sure of the type of power supplied to your home, consult your local power company. This CAMCORDER is intended to be powered by a rechargeable battery or by its power supply. Refer to the operating instructions.
18 GROUNDING OR POLARIZATION:
This CAMCORDER may be equipped with either a polarized 2-wire AC line plug (a plug having one blade wider than the other) or a 3-wire grounding type plug (a plug having a third pin for grounding). If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your outlet. Do not defeat the safety purpose of the polarized plug.
19 POWER-CORD PROTECTION:
Route power supply cords so that they are not likely to be walked on or pinched by items placed on or against them. Pay particular attention to the plug, areas around wall outlets, and the point where the cord exits from the unit.
20 LIGHTNING:
To protect the CAMCORDER during a lightning storm or when you leave it unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the CAMCORDER due to lightning and powerline surges.
21 OVERLOADING:
Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
22 OBJECTS AND LIQUIDS:
Never push objects of any kind into the CAMCORDER through the openings in its case. The objects may touch dangerous voltage points or short out a part that could result in a fire or electric shock. Never spill liquids of any kind onto the CAMCORDER. Should spillage occur, unplug the unit and have it checked by a technician before use.
iii
Important safety instructions
23 SERVICING:
Do not attempt to service this CAMCORDER yourself. Opening or removing the covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
24 DAMAGE REQUIRING SERVICE:
Unplug this CAMCORDER from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If any liquid has been spilled onto or objects have fallen into
the CAMCORDER.
c. If the CAMCORDER has been exposed to rain or water.
d. If the CAMCORDER does not operate normally when you
follow the operating instructions. Do not continue to adjust the controls. Improper adjustment of the controls may result in severe damage. If this occurs, it will often require extensive work by a qualified technician to restore the CAMCORDER to its normal operation.
e. If the CAMCORDER has been dropped or the case has been
damaged.
f. When the CAMCORDER exhibits a distinct change in
performance.
25 REPLACEMENT PARTS:
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
26 SAFETY CHECK:
After the CAMCORDER has been serviced or repaired, ask the service technician to perform safety checks on the unit to confirm that the CAMCORDER is in safe operating order.
27 To prevent damage which may result in a fire or shock hazard,
do not expose this appliance to rain or moisture.
28 Before using the power supply with a 240V AC wall outlet,
attach a plug adaptor that matches the design of local wall outlets to the power supply’s plug.
iv
Important safety instructions
USER INSTALLER CAUTION:
Your authority to operate this FCC certified equipment could be voided if you make changes or modifications not expressly approved by this party responsible for compliance to part 15 FCC rules.
NOTE:
Hg
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST
BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. For details see lamprecycle.org, eiae.org, or call 1-800-Samsung (7267864)
CALIFORNIA USA ONLY This Perchlorate warning applies only to primary CR (Manganese Dioxide) Lithium coin cells in the product sold or distributed ONLY in California USA“Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help and for additional suggestions. The user may find the following booklet prepared by the Federal Communications Commission helpful: “How to Identify and Resolve Radio-TV Interference Problems.” This Booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402, Stock No. 004-000-00345-4.
FCC Warning
The user is cautioned that changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions;
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference
that may cause undesired operation.
v
Before reading this user manual
Before reading this user manual, review the following.
Safety warnings
Icon Definition Meaning
Warning
Caution
There is a potential risk of death or serious injury.
There is a potential risk of personal injury or damage to the product.
Icons used in this manual
Icon Definition Meaning
To reduce the risk of fire, explosion, electric
Caution
Note
Definition
These warning icons are here to prevent injury to you and others or to help you operate your camcorder better. Please follow them explicitly. After reading this section, keep it in a safe place for future reference.
shock, or personal injury when using your camcorder, follow these basic safety precautions.
Here are hints or page number references you will find helpful when you operate the camcorder.
Here are additional definitions or information you will find helpful when you operate the camcorder.
Precautions
Warning!
When using the AC power adaptor with your camcorder, connect
• the adaptor to an outlet with protective grounding. Do not expose the camcorder battery to direct sunlight, heaters,
• radiators, fire, or any other source of excessive heat.
Caution
If you replace the battery with the wrong battery, you can cause an explosion. Replace only with the same battery or an equivalent type.
If you plug the AC adaptor into a 240V AC outlet, be sure to use a suitable plug adaptor that matches the design of local wall outlets.
Proper recording etiquette
Do not record videos and photos of people without their authorization or consent. Do not record videos and photos in forbidden recording places.
• Do not record videos and photos in private places.
2
Before reading this user manual
Important information on use
About this user manual
Thank you for purchasing this Samsung Camcorder. Please read this user manual carefully before you use the camcorder and keep it handy for future reference. Should your camcorder fail to operate correctly, refer to Troubleshooting. ¬pages 108~120
This User Manual covers HMX-Q20, HMX-Q200, and HMX-QF20 models.
Illustrations of model HMX-Q20 are used in this user manual.
The HMX-QF20 has the wireless networking function. ¬pages 72~80 Although some features of HMX-Q20, HMX-Q200, and HMX-QF20 are different, they operate in the same way.
The displays in this user manual may not be exactly the same as those you see on the LCD screen.
The design and specifications of the camcorder and other accessories are subject to change without notice.
Before use, read the ‘Safety information’ carefully and then operate the product properly.
In this manual, a ‘memory card (card)’ means an SD, SDHC, or SDXC.
In this user manual’s function description tables, the icon shown in a description of a submenu item indicates it will appear on the screen when you set the corresponding function. Ex) Tele Macro Submenu item ¬page 97
- On (
): Set to record close-up images of very small objects.
If set to On, the corresponding icon (
Samsung is not responsible for any injury or damage caused by not following the user manual.
) will appear on the screen.
Before using this camcorder
This camcorder records video in H.264 (MPEG4/AVC) format.
You can play back and edit the video recorded by the camcorder on a personal computer using the internal software of this camcorder.
Please note that this camcorder is not compatible with other digital video formats.
Before recording an important video, make a trial recording.
Play back your trial recording to make sure the video and audio have been recorded properly.
Recorded contents may be lost due to errors in handling the camcorder or memory card, etc.
Samsung will not provide compensation for damages caused by the loss of recorded contents.
Make a backup of important recorded data.
Protect your important recorded data by copying the files to a PC. We also recommend you copy them from your PC to other recording media for storage. Refer to the software installation and USB connection guide.
Copyrights: Please note that this camcorder is intended for individual use only.
Data recorded on the storage media in this camcorder using other digital/analog media or devices is protected by the Copyright Act and cannot be used without permission of the owner of the copyright, except for personal enjoyment. Even if you record an event such as a show, performance, or exhibition for personal enjoyment, we strongly recommend that you obtain permission beforehand.
3
Before reading this user manual
The wireless version of this camcorder may emit radio interference. Avoid using it near pacemakers and similar medical equipment.
Always use caution when transfering files via Wi-Fi. There is a danger that your data could be intercepted.
Take the appropriate security precautions when using wireless network products. Samsung is not responsible for
any damages that may arise from security problems caused by the failure to implement security measures or from unavoidable circumstances associated with the use of a wireless network.
For Open Source licenses information, refer to the
• ‘Opensource-Q20.pdf’ in the provided CD-ROM.
Notes regarding trademarks
All the trade names and registered trademarks mentioned in this manual or other documentation provided with your Samsung product are trademarks or registered trademarks of their respective holders. Furthermore, ‘™’ and ‘ this manual.
The SD, SDHC and SDXC logos are trademarks of SD-3C, LLC.
®
Microsoft
, Windows®, Windows Vista®, Windows® 7, and
®
DirectX
are either registered trademarks or trademarks of the
Microsoft Corporation in the United States and/or other countries.
®
Intel
, Core™, Core 2 Duo®, and Pentium® are the registered trademarks or trademarks of the Intel Corporation in the United States and other countries.
AMD and Athlon™ are either registered trademarks or trademarks of AMD in the United States and other countries.
Macintosh, Mac OS are either registered trademarks or trademarks of Apple Inc. in the United States and/or other countries.
YouTube is a trademark of Google Inc.
®
’ are not mentioned in each case in
Flickr is a trademark of Yahoo.
• Facebook is a trademark of Facebook Inc.
• Twitter is a trademark of twitter Inc.
• Picasa is a trademark of Google Inc.
• HDMI, the HDMI logo and High-Definition Multimedia Interface are
• trademarks or registered trademarks of HDMI Licensing LLC. Adobe, the Adobe logo, and Adobe Acrobat are either registered
• trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
®
Wi-Fi
, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are registered
trademarks of the Wi-Fi Alliance.
AllShare™ is a Samsung’s trademark.
4
Safety information
The safety precautions illustrated below are to prevent personal injury or material damages. Heed all instructions carefully.
WARNING There is a potential risk of death or serious injury.
Do not overload outlets or extension cords as this may result in abnormal heat or fire.
No sand or dust! Fine sand or dust entering the camcorder or AC power adaptor can damage both units and cause them to malfunction.
Do not bend the power cord or damage the AC power adaptor by pressing on it with a heavy object. A damaged power cord or power supply can cause a fire and poses a risk of electric shock.
Using the camcorder at temperatures over 140˚F (60˚C) may result in fire. Keeping the battery at a high temperature may cause an explosion.
No oil! Oil entering the camcorder or AC power adaptor can damage both units, cause them to malfunction, and poses a risk of electric shock.
Do not disconnect the AC adaptor by pulling on its power-cord. This can damage the power-cord.
5
Do not allow water, metal or inflammable matter to enter the camcorder or AC power adaptor. Doing so may pose a fire hazard.
Do not aim the camcorder directly into the sun. Doing so could cause eye injuries and cause internal parts of the product to malfunction.
Do not use the AC adaptor if it has damaged, split ,or broken cords or wires. A damaged power cord can cause a fire and poses a risk of electric shock.
Safety information
WARNING There is a potential risk of death or serious injury.
Do not plug in the AC adaptor unless the plug can be fully inserted into the wall outlet with no part of the blades exposed.
Keep the camcorder away from water when using it near the beach or pool or when it rains. Getting water inside the camcorder can cause it to malfunction and poses a risk of electric shock.
Keep the power supply’s power-cord unplugged when not using the power supply or during lightning storms. There is a risk of fire.
If the camcorder malfunctions, immediately detach the AC adaptor or battery from the camcorder. There is a risk of fire or injury.
Do not dispose of the battery in a fire. The heat from the fire could cause the battery to explode.
Do not plug in or unplug the power cord with wet hands. You could receive an electric shock.
When cleaning the AC adaptor, unplug the power-cord. Leaving the adaptor plugged in can cause it to malfunction and poses a risk electric shock.
To avoid a risk of fire or electric shock, do not attempt to disassemble, repair, or modify the camcorder or the AC adaptor.
6
Never use cleaning fluid or similar chemicals to clean the camcorder. Do not spray cleaners directly on the camcorder. Doing so may pose a fire hazard.
Keep the used lithium battery or memory card out of the reach of children. If the lithium battery or memory card is swallowed by a child, consult a physician immediately.
If the camcorder emits an abnormal sound or smell or smokes, unplug the power-cord immediately and request service from a Samsung service center. There is a risk of fire or personal injury.
Safety information
CAUTION There is a potential risk of personal injury or damage to the product.
Do not press the surface of the LCD with force, or hit it with a sharp object. If you press or strike the LCD surface, you can cause display unevenness or damage the display.
Do not use the camcorder in direct sunlight or near heating equipment. Excess heat can cause the camcorder to malfunction and lead to personal injury.
Do not use the camcorder near dense exhaust gas generated by gasoline or diesel engines, or near a corrosive gas such as hydrogen sulfide. Doing so may corrode the external or internal terminals, disabling normal operation.
Do not put the camcorder down with the LCD screen open.
Do not drop or expose the camcorder, battery, AC adaptor, or other accessories to severe vibrations or impact. Severe vibration or impact can cause these items to malfunction and lead to personal injury.
Do not leave the camcorder in a closed vehicle for a long time where the temperature is very high.
Do not expose the camcorder to insecticide. Insecticide entering the camcorder could cause the product to operate abnormally. Turn the camcorder off and cover it with vinyl sheet, etc. before using insecticide.
Do not wipe the camcorder body with benzene or thinner. The exterior coating could peel off or the surface could deteriorate.
7
Do not use the camcorder on a tripod (not supplied) in a place where it is subject to severe vibrations or impact.
Do not expose the camcorder to soot or steam. Thick soot or steam could damage the camcorder case or cause a malfunction.
Do not expose the camcorder to sudden changes in temperature or high humidity. Use care when operating the camcorder outdoors during a lightning storm. Rapid temperature changes and high humidity can damage the camcorder and lightning storms pose the threat of electric shock .
Do not leave the LCD screen open when not using the camcorder.
Safety information
CAUTION There is a potential risk of personal injury or damage to the product.
Do not hold the camcorder by the LCD monitor when lifting it. The LCD screen could detach and the camcorder may fall.
Use Samsung-approved accessories only. Using products from other manufacturers may lead to overheating, fire, explosion, electric shock or personal injuries caused by abnormal operation.
Only plug the adaptor plug into a socket that is easily accessible. If any problem occurs with the product, you must pull the plug out of the socket to disconnect the power completely. Turning off the power button on the product does not completely disconnect the power.
Do not use the camcorder near a TV or radio: This could cause distortion on the TV screen or interference in the radio broadcasts.
Place the camcorder on a stable surface that is well ventilated.
Manufacturers of unauthorized accessories compatible with this camcorder are responsible for their own products. Use the optional accessories according to their safety instructions. Samsung is not responsible for any malfunctions, for fires or electric shocks, or for damage caused by unauthorized accessories.
8
Do not use the camcorder near sources of strong radio waves or magnetism such as speakers or large motors. Noise from these sources could distort the video or audio you are recording.
Store important data separately from the camcorder on a PC, DVD disc, CD disc, etc. Samsung is not responsible for data loss.
Contents
Getting Started .............................................. 11
Unpacking ........................................................................... 12
Camcorder layout ................................................................ 13
Inserting/Ejecting the battery and memory card ................. 15
Inserting/ejecting the battery .................................................... 15
Inserting/ejecting a memory card (not supplied) ........................ 16
Charging the battery ............................................................ 20
Checking the battery state ...................................................... 21
Turning your camcorder on/off............................................ 24
Using the touch screen ....................................................... 25
Performing the initial setup.................................................. 28
Selecting the language ........................................................ 29
Learning icons ..................................................................... 30
Using the Home screen ....................................................... 34
Accessing the Home screen ................................................... 34
Icons on the Home screen ...................................................... 34
Using the grip belt ............................................................... 35
Basic functions ..............................................36
Recording videos ................................................................ 37
Recording videos in portrait mode ........................................... 39
Tagging great moments while recording (My Clip function) ........ 40
Recording photos ................................................................ 41
Recording with ease for beginners (SMART AUTO) ............ 42
Zooming .............................................................................. 43
Extended functions ........................................44
Using the Manual modes .................................................... 45
White Balance ....................................................................... 45
EV (Exposure Value) ................................................................ 46
Back Light .............................................................................. 47
Focus .................................................................................... 48
Super C.Nite .......................................................................... 49
Self Timer ............................................................................... 50
Cont. Shot ............................................................................. 50
Using the Art Film modes .................................................... 51
Fader ..................................................................................... 51
Digital Effect ........................................................................... 52
Using the Art Time Lapse mode .......................................... 53
Playback/Editing ............................................ 55
Viewing videos or photos in playback mode....................... 56
Starting the playback mode ..................................................... 56
Playing back videos ................................................................ 57
Tagging great moments during playback .................................. 60
Viewing photos ....................................................................... 61
Editing videos or photos ..................................................... 63
Share (HMX-QF20 only) .......................................................... 63
Delete .................................................................................... 65
Delete My Clip ........................................................................ 66
My Clip Creation ..................................................................... 66
Protect ................................................................................... 67
Smart BGM ............................................................................ 67
Divide ..................................................................................... 68
9
Contents
Combine ................................................................................ 69
File Info................................................................................... 70
Wireless network (HMX-QF20 only) ................71
Connecting to a WLAN and configuring network settings .. 72
Connecting to a WLAN ........................................................... 72
Configuring the network settings .............................................. 73
Manually setting the IP address ............................................... 74
Network connection tips ......................................................... 75
Entering text ........................................................................... 75
Using video or photo sharing web sites .............................. 76
Accessing a web site .............................................................. 76
Uploading videos or photos..................................................... 76
Viewing videos or photos on a TV Link-enabled TV ............ 77
Using Auto Backup to send videos or photos .................... 78
Installing the program for Auto backup on your PC ................... 78
Sending photos or videos to a PC ........................................... 78
About the Wakeup on LAN (WOL) feature ................................ 79
Using with other devices ................................81
Connecting to a TV .............................................................. 82
Connecting to a high definition TV with HDMI ........................... 82
Connecting to a regular TV ...................................................... 83
Viewing on a TV screen ........................................................... 84
Dubbing videos to VCR or DVD/HDD recorders ................. 85
Printing photos with a PictBridge photo printer .................. 86
Transferring files to your Windows computer ..................... 88
Transferring files with Intelli-studio ............................................ 89
Transferring files by connecting the camcorder as a removable
disk ........................................................................................ 93
Settings ........................................................95
Settings menu ..................................................................... 96
Accessing the settings menu .................................................. 96
Shooting ................................................................................ 97
Playback ................................................................................ 98
Display ................................................................................. 101
Connectivity.......................................................................... 103
General ................................................................................ 104
Appendixes ................................................. 107
Troubleshooting ................................................................ 108
Warning icons and messages ............................................... 108
Symptoms and solutions ....................................................... 114
Maintenance ...................................................................... 121
Using your camcorder abroad .......................................... 123
Glossary ............................................................................ 124
Specifications .................................................................... 125
10
Getting Started
Learn about your camcorder’s layout, icons, and home screen.
Unpacking ........................................................................... 12
Camcorder layout ................................................................ 13
Inserting/Ejecting the battery and memory card ................. 15
Inserting/ejecting the battery .................................................... 15
Inserting/ejecting a memory card (not supplied) ........................ 16
Charging the battery ............................................................ 20
Checking the battery state ...................................................... 21
Turning your camcorder on/off............................................ 24
Using the touch screen ....................................................... 25
Performing the initial setup.................................................. 28
Selecting the language ........................................................ 29
Learning icons ..................................................................... 30
Using the Home screen ....................................................... 34
Accessing the Home screen ................................................... 34
Icons on the Home screen ...................................................... 34
Using the grip belt ............................................................... 35
Unpacking
Your new camcorder comes with the following accessories. If any of these items is missing from your box, call Samsung’s Customer Care Center.
Checking your accessories
Model name Color Internal memory Lens
HMX-Q20BN
HMX-Q200BN
HMX-Q20TN
HMX-Q200TN
HMX-Q20RN
HMX-Q200RN
HMX-QF20BN Black Yes
Although some features of the models are different, they operate in the same way.
Black
Titan
Wine Red
No
X20 (Optical)
X40 (Digital)
WiFi
module
Getting Started
Battery
(BP125A)
(AD43-00197A)
User manual CD
(AD46-00423A)
AC power adaptor
(AA-MA9)
(AD44-00151A)
Quick start guide
(AD68-06831A)
USB cable
(AD39-00194A)
Optional accessories
No
Audio/Video
(AD39-00184A)
Micro HDMI cable
cable
(AD39-00179A)
The exact appearance of each item may vary by model.
The contents may vary depending on the sales region.
You can purchase parts and accessories. Consult your local Samsung dealer.
SAMSUNG is not responsible for reduced battery life time or malfunctions caused by any unauthorized use of accessories such as the AC power adaptor or the batteries.
A memory card is not included. See page 17 for memory cards compatible with your camcorder.
Your camcorder includes the user manual CD and printed quick start guide.
External battery
charger
(IA-BC9UA4)
Carrying case
(AD69-00929A)
Memory card
12
Camcorder layout
Top/Front/Left
1
Lens
2
Charging indicator
1
2 3 4
6 7 8 9
5
10
Getting Started
2
3
Home ( ) button
4
LCD screen (Touch screen)
5
Internal microphone
6
Internal speaker
7
Jack cover (AV/HDMI/micro USB)
8
AV (Audio/Video) jack
9
HDMI jack
10
micro USB jack
Be careful not to cover the internal microphone and lens during recording.
13
Camcorder layout
Rear/Right/Bottom
3
4
5
6
1
Lens open/close switch
2
Grip belt
1
2
11 12
7
8
10
9
3
Jack cover (DC IN)
4
DC IN jack
5
Zoom (T/W) button
6
7
8
9
10
11
12
/
My Clip (
Recording start/stop button
Battery slot
Memory card slot
Battery/Memory card cover
Battery release switch
Tripod receptacle
) button
Getting Started
14
Inserting/Ejecting the battery and memory card
Inserting/ejecting the battery
Battery release switch
To insert the battery
Slide, and then open the battery slot cover as shown in the
1
figure.
Insert the battery into the battery slot until it locks.
2
Make sure that the SAMSUNG logo is facing down and the battery is placed as shown in the figure.
Close the battery slot cover.
3
Samsung is not responsible for problems that are caused by using unapproved batteries. If you use batteries from other manufacturers, there is a danger of overheating, fire, or explosion. Purchase extra batteries to allow continuous use of your camcorder.
Getting Started
To eject the battery
Slide, and then open the battery slot cover as shown in the
1
figure.
Slide the Battery release switch in the direction shown in the
2
figure, and then pull out the battery.
Close the battery slot cover.
3
15
Inserting/Ejecting the battery and memory card
Inserting/ejecting a memory card (not supplied)
To insert a memory card
Slide, and then open the memory card cover as shown in
1
the figure.
Insert the memory card into the card slot until it softly clicks.
2
Make sure that the label portion of the card is facing up and the camcorder is placed as shown in the figure.
Close the memory card cover.
3
To avoid the data loss, turn off the camcorder by pressing and holding the [Home ( )] button before inserting or ejecting the memory card.
• Be careful not to push the memory card too hard. The memory card may suddenly pop out.
Getting Started
To eject a memory card
Slide, and then open the memory card cover as shown in
1
the figure.
Gently push the memory card to eject it.
2
Close the memory card cover.
3
16
Inserting/Ejecting the battery and memory card
Compatible memory cards
You can use SD, SDHC, and SDXC cards with this camcorder. We
• recommend you use an SDHC card. This camcorder supports SD cards up to 2GB. We cannot guarantee normal operation with SD cards bigger than 2GB.
MMC (Multi Media Card) and MMC Plus are not supported.
Compatible memory card capacity:
- SD: 1GB~2GB
- SDHC: 4GB~32GB
- SDXC: ~up to 64GB
When you use unauthorized memory cards, the camcorder cannot
• record videos correctly and your recordings may be lost.
The memory cards released after the release date of this camcorder
• may not be compatible with the camcorder.
To ensure stable operation, use 6MB/S (Class 6) or above memory
• cards.
SD/SDHC/SDXC memory cards have a mechanical write-protection
• switch. Setting the switch prevents accidental erasure of files recorded on the card. To enable writing, move the switch up in the direction of the terminals. To set write protection, move the switch down.
SDHC/SDXC cards are a higher version of SD memory cards and
• provide more memory capacity than SD memory cards.
SD cards can be used with current SD enabled host devices.
Usable memory card
Terminals
Protection tab
<SDHC>
<SDXC><SD>
Getting Started
17
Inserting/Ejecting the battery and memory card
Handling a memory card
Damaged data may not be recoverable. We recommend you make
• a back-up of important data separately on the hard disk of your PC. Turning the power off or removing a memory card during an
• operation such as formatting, deleting, recording, and playback may cause data loss. If you modify the name of a file or folder stored in the memory card
• with your PC, your camcorder may not recognize the modified file. The memory card does not support any data recovery mode.
• Therefore, care should be taken in case the memory card is damaged while recording. Make sure to format the memory card on this camcorder. If the
• memory card had been formatted by a PC or other device, using it on this camcorder without reformatting it on the camcorder may result in trouble with recording and/or playback. Samsung is not responsible for damage to recorded contents caused by a failure to format the memory card properly. You have to format newly-purchased memory cards and memory
• cards with data that your camcorder cannot recognize or with data saved by other devices. Note that formatting erases all data on the memory card and deleted data cannot be recovered. A memory card has a certain life span. If you cannot record new
• data, you have to purchase a new memory card. Do not bend, drop, or subject the card to strong impacts.
• Do not place foreign substances on the memory card terminals.
• Use a soft dry cloth to clean the terminals if required. Do not paste anything other than the label provided with the card
• on the label pasting area of the card. Do not use a damaged memory card.
• Be careful to keep the memory card out of the reach of children,
• who might swallow it.
The camcorder supports SD, SDHC, and SDXC memory cards, giving you a wider choice of cards!
The data storage speed of cards may differ, depending on the manufacturer and production system.
SLC (single level cell) system: faster write speed enabled.
MLC (multi level cell) system: only lower write speed is supported.
For best results, we recommend using a memory card that supports a faster write speed. Using a lower write speed memory card for recording video may cause difficulties when storing. You may even lose your video data during the recording. In an attempt to preserve every bit of the recorded video on a low speed card, the camcorder forcibly stores the video on the memory card and displays a warning:
Low speed card. Please record at a lower resolution.
If you are unavoidably using a low speed memory card, the resolution and quality of the recording may be lower than the value you set. ¬page 97 The higher the video resolution and quality, the more memory the camcorder uses.
Samsung is not responsible for data loss due to misuse, including loss caused by any PC virus. We recommend using a memory card case to avoid data loss that
• can be caused by moving the card or by static electricity. After a period of use, the memory card may get warm. This is normal
• and is not a malfunction.
Getting Started
18
Inserting/Ejecting the battery and memory card
Recording time available for video in minutes
Resolution
Full HD 1080/60i
HD 720/60p
Web/HD
1GB 2GB 4GB 8GB 16GB 32GB 64GB
7 14 30 61 123 247 497
10 21 42 86 174 349 702
9 19 40 81 167 336 665
Storage media (Capacity)
(Unit: Approximate minutes of recording)
Recordable number of photos
Resolution
5.3M 3072X1728
2M 1920X1080
1GB 2GB 4GB 8GB 16GB 32GB 64GB
878 1847 2832 5770 9999 9999 9999
1097 2309 4602 9352 9999 9999 9999
Storage media (Capacity)
(Unit: Approximate number of images)
1GB ⴊ 1,000,000,000 bytes : Actual formatted capacity may be less as the internal firmware uses a portion of the memory.
Actual recording times may differ depending on the recording conditions and the subject.
The higher the quality and resolution, the more memory the camcorder uses.
Lower resolution and quality increases the recording time, but the image quality may suffer.
The bit rate automatically adjusts to the image being recorded. Accordingly, the recording time may vary.
Memory cards bigger than 64GB may not operate normally.
The maximum video file size is 1.8GB. When a video file exceeds
1.8GB, a new video file is created automatically. When recording in Web/HD resolution, you can record a video up to
• 10 minutes. The maximum number of recordable photo and video files is 9999,
• respectively. The recording length of Art Time Lapse may vary depending on
• settings.
Getting Started
19
Charging the battery
Charge the battery using the AC power adaptor or the USB cable. The charging indicator lights up and charging starts. After the battery is fully charged, the charging indicator turns green.
Using the AC power adaptor
Connect the AC power adaptor to the camcorder properly, and then plug the AC Power adaptor in the wall outlet.
Using the USB cable
Connect the USB cable to the camcorder properly, and then connect the other end to a USB port of a PC.
Getting Started
20
Make sure that there are no foreign substances on the plug and in the socket when you connect the AC power supply to the camcorder.
Make sure to turn off the camcorder before disconnecting the AC power adaptor. Otherwise, you can damage the storage media or data.
Use a nearby wall outlet when using the AC power adaptor. Disconnect the AC power adaptor from the wall outlet immediately if any malfunction occurs while using your camcorder. Do not place the AC Adaptor in a confined space when you use it,
• such as between a wall and a piece of furniture.
When charging, if both the USB cable and AC power adaptor are connected, the AC power adaptor will override the USB.
You cannot operate the camcorder using USB power only. Use the AC power adaptor or battery to power the camcorder.
USB charging time may depend on the type of USB host on your PC.
If you use the camcorder while you are charging the battery, charging may take longer.
Be sure to use the included AC power adaptor to power the camcorder. Using other AC power adaptors could cause electric shock or result in fire. You can use the AC power adaptor around the world. However, you
• will need an AC plug adaptor that matches the design of local wall outlets in some foreign countries. If you need an adaptor, purchase it from your distributor.
Charging the battery
Checking the battery state
You can check the charging state and remaining battery capacity.
To check the charging state
The color of the LED indicates the power or charging state.
LED color Description
(Orange)
(Green)
(Orange Blink)
Charging
Fully charged
Error
Battery level display
The battery level display shows the amount of battery power remaining in the battery.
Battery level
icon
Exhausted (flickers): The camcorder will be
forced to turn off after 3 minutes. Change the
- After 3 seconds, the camcorder turns off.
The figures above are based on a fully charged battery at a normal temperature. Low ambient temperature may affect the use time.
State Message
Fully charged -
25~50% used -
50~75% used -
75~95% used -
95~98% used -
battery as soon as possible.
STBY 00:00:00 [253Min]
-
Low Battery
Getting Started
21
Charging the battery
Available charging and running time for the battery
Battery type BP125A
Charging time
Video resolution Full HD HD
Using the AC power adaptor: approx. 130 min.
Using the USB cable: approx. 270 min.
Continuous recording time
Playback time
Charging time: Approximate time in minutes required to fully charge a completely exhausted battery.
• Recording/Playback time: Approximate time available when you have fully charged the battery.
• Times shown above are measured under Samsung’s test conditions. Your times may differ, depending on your usage and conditions.
Continuous Recording (without zoom)
The continuous recording time above shows the available recording time when you record without using any other function after recording starts. The battery may discharge 2-3 times faster than this reference if you use the recording start/stop, the zoom, and the playback functions. Prepare additional batteries with the expectation that the actual recording time is about 1/3 to 1/2 of the times listed above.
Approx. 105 min. Approx. 120 min.
Approx. 140 min. Approx. 160 min.
Using an AC power source
We recommend that you use the AC power adaptor to power the camcorder from a household AC outlet when recording and playing the camcorder indoors. The connection is the same as that for battery charging. ¬page 20
The charging time will vary depending on the charge remaining in the battery.
Depending on your PC specifications, the charging time can be prolonged.
The battery is charged over 95% after about 2 hours, and the indicator color changes to green. It takes about 2 hours and 40 minutes for the battery to charge 100%. The recording and playback times will be shorter when you use your
• camcorder in low temperatures. We recommend using the AC power adaptor when using the Art
• Time Lapse function.
Getting Started
22
Charging the battery
About the battery
Battery properties
A lithium-ion battery is small-sized and has a high capacity. Low
ambient temperature (below 50ºF (10ºC)) may shorten its usage time and affect its function. Before recording in low temperatures, put the battery into your pocket to warm it, then install it in the camcorder.
Make sure to store the battery separately after use.
- A small amount of battery power is consumed when the battery is stored in the camcorder even if the camcorder power is off.
- The battery may be completely discharged, if it has been installed and left in the camcorder for a long period of time. If this occurs, the battery may not fully operate even if you charge it.
- If the battery is not used for a long time, fully charge the battery and then, using your camcorder, drain the charge completely once every 3 months to keep the battery functioning properly. To store the battery, remove it from your camcorder and put it in a cool, dry place.
Charge an extra battery before using the camcorder
• outdoors in cold temperatures.
- The cold temperature may shorten the available recording time.
- Carry the supplied AC power adaptor to charge the battery while
travelling.
Check whether the battery terminal is damaged if the battery falls or is dropped.
- If you install a battery with the damaged terminal into the camcorder, you can damage the camcorder.
Remove the battery and the memory card from the camcorder and disconnect the power adaptor after use.
- Store the battery in a stable, cool and dry place. (Recommended temperature : 59ºF~77ºF (15ºC~25ºC), recommended humidity: 40%~60%)
- Temperatures that are too high or too low shorten the battery lifetime.
- The battery terminals can become rusty or malfunction if the battery is stored in a smoky or dusty location.
Recycle or dispose of your dead batteries properly.
The battery lifetime is limited.
- Battery capacity decreases over time and through repeated use. If decreased usage time between charges becomes significant, it is probably time to replace the battery with a new one.
- Each battery’s life is affected by storage, operating, and environmental conditions.
Getting Started
23
Turning your camcorder on/off
[Home ( )] button
LCD screen
Turn on the camcorder by opening the LCD screen.
1
Your camcorder turns on automatically when you open the LCD screen.
To turn the camcorder on when the LCD screen is already open, press and hold the [Home (
To turn off the camcorder, press and hold the [Home ( )]
2
button.
Your camcorder turns off even when you close the LCD screen.
)] button.
The camcorder operates the self-diagnosis function when you turn it
• on. ¬pages 108~113 If the Quick On STBY function is set to 5 Min and you close the LCD
• screen when the power is on, the power saving mode activates.
page 105
¬
The camcorder turns on automatically if you connect the AC power
• adaptor or insert the battery into the camcorder with the LCD screen open.
When using this camcorder for the first time
When you use your camcorder for the first time or reset it, the time zone screen appears at start-up. Select your geographical location and then set the date and time. ¬page 28 If you do not set the date and time, the time zone screen appears every time you turn on the camcorder.
Getting Started
24
u
u
1
Using the touch screen
The touch screen lets you playback and recording with a simple touch of your finger. Place your hand on the rear side of the LCD screen to support it. Then, touch the items displayed on the screen.
Drag
Drag the touch screen up, down, left, or right to select the desired items or files.
Manual Art Film
Vertical HD
Recording
Social Sharing
Album Settings
1
Auto Backup
Getting Started
Touch
Lightly touch items with your finger to select or execute.
STBY 00:00:00 [253Min]
Do not place any protective film on the LCD screen.
If you leave a film attached for a long time, strong adhesion between the film and the surface of the screen may cause a malfunction of the touch screen.
Be careful not to accidentally press the button near the LCD screen
• while using the touch screen. The tabs and icons that appear on the LCD screen depend on the
• current recording/playback status of your camcorder. The camcorder does not recognize touches if you touch more than two
• points on the screen at the same time. Touch one point at a time.
25
Using the touch screen
Switching the information display mode
You can switch the on-screen information display mode. Each time you touch the LCD screen, the full and minimum display modes alternate.
Full display mode
STBY 00:00:00 [253Min]
Minimum display mode
STBY
Warning icons and messages may appear, depending on the recording conditions. ¬pages 108~113
Getting Started
26
Loading...
+ 103 hidden pages