Samsung HG55ED690 User Manual

LED TV

Installation manual

Thank you for purchasing Samsung product. To receive more service, please register your product at

www.samsung.com/register

Model Serial No.

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and speciﬁcations may be changed without notice.

Instruction

This TV is provided with interactive functionality through a set-back box (SBB/STB) connected to the TV, and with other TVs in a computercontrolled system for hotels and other hospitality businesses.

Interactive: When the TV is powered-up initially, it sends a command to identify the SBB/STB; if identiﬁed, theTV switches to ONLINE mode and full control is through the SBB/STB.

If the TV is in ONLINE mode, it stops receiving IR(Samsung remote) commands and acts according to interface protocol. Stand-Alone: If SBB/STB is not identiﬁed, the TV should be switched to STAND-ALONE mode with restricted operation.

Operational Modes

When this TV (in Hotel mode) is operated with a SBB/STB, it is in one of two states :

•ONLINE or STAND-ALONE. In the STAND-ALONE state, the TV will act as a Hotel TV, but without active communication. This is to prevent guests from trying to cheat the system by disconnecting the SBB/STB.

Hotel TV

Hotel Mode On

Power

To set the details for Stand-alone or interactive mode, refer to pages 25-28(Setting the hotel option data : Stand-alone mode and Interactive mode)

•Some operations may be restricted to prevents guests from "cheating" the TV system.

•No main menu(Interactive mode) or Channel Menu, Plug & Play in Main Menu (Stand-Alone mode)

•Limited Volume and Panel key lock or unlock

SBB/STB Online if

one success within

10 attempts

Stand-alone Mode

SBB/STB Online-10

consecutive

fails

Poll Rate 20/sec

SBB/STB StatusAttempt every 2secs

Online Mode

Still image warning

Avoid displaying still images (like jpeg picture ﬁles) or still image element (like TV Program logo, panorama or 4:3 image format, stock or news bar at screen bottom etc.) on the screen. Constant displaying of still picture can cause uneven wear of screen phosphor, which will affect image quality. To reduce risk of this effect, please follow below recommendations:

•Avoid displaying the same TV channel for long periods.

•Always try do display any image on full screen, use TV set picture format menu for best possible match.

•Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout

process.

•Frequently use all TV features designed to reduce image retention and screen burnout. Refer to the relevant user manual section for details.

Securing the Installation Space

Keep required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in ﬁre or a problem with the product due to an increase in the internal temperature.

•When using a stand or wall-mount, use parts provided by Samsung Electronics only.

– Using parts provided by another manufacturer may result in a problem with the product or injuries due to the product falling.

•The appearance may differ, depending on the product.

Installation with a stand. Installation with a wall-mount.

10 cm

10 cm10 cm

10 cm

10 cm10 cm

Contents

y Instruction ................................................................................................................................................ 2

y Operational Modes .................................................................................................................................. 2

y Still image warning ................................................................................................................................... 2

y Securing the Installation Space ................................................................................................................ 2

y Accessories ............................................................................................................................................. 4

y Installing the LED TV Stand ...................................................................................................................... 5

y Assembling the swivel (32 inch TVs or larger) ........................................................................................... 7

y Viewing the Connection Panel .................................................................................................................. 9

y TV Controller ............................................................................................................................................ 12

y Viewing the Remote Control ..................................................................................................................... 13

y Samsung Smart Control (sold separately) ................................................................................................. 15

y Connecting the TV with SBB .................................................................................................................... 18

y Connecting the Bathroom Speakers ........................................................................................................ 19

y Connecting the MediaHub HD ................................................................................................................. 21

y Connecting the RJP (Remote Jack Pack) ................................................................................................. 22

y Connecting to a COMMON INTERFACE slot (Your TV viewing Card Slot) ................................................. 24

y Setting the Hotel Option Data .................................................................................................................. 25

y Installing the Wall Mount .......................................................................................................................... 67

y Securing the TV to the Wall ...................................................................................................................... 68

y Anti-theft Kensington Lock ....................................................................................................................... 68

y Speciﬁcations .......................................................................................................................................... 69

y Dimensions .............................................................................................................................................. 70

ENGLISH

English

Accessories

✎ Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer. ✎ The items’ colour and shapes may vary depending on the model.

• Remote Control & Batteries (AAA x 2)

• Samsung Smart Control (sold separately)

• Quick Set up Guide

• CI Card Adapter

• Hotel Mount Kit

✎ The stand and stand screw may not be included, depending on the model. ✎ The Data Cable may not be included, depending on the SI Vendor.

• Power Cord / Data Cable

• Owner’s Instructions

Safety Guide (Not available in all locations)

• Cable Holder

Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government ofﬁce, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return

systems.)

This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.

English

Installing the LED TV Stand

The 32” and larger LED TVs have swivel stands. You can set these stands so that the TVs swivel 20 degrees left and right or 90 degrees left and right.

Stand Components

When installing the stand, use the provided components and parts.

1 EA

28"

HG28ED690

1 EA

32"

32" ~ 55"

28"

40" ~ 55"

Stand Guide Stand Screws

28" ~ 32"

x7 (M4 X L12)

40" ~ 55"

x8 (M4 X L12)

(M4 X L12)

1-1

1-2

1-3

Tight the bottom of the screw ﬁrst, and stow the upper side of

screw last.

(M4 X L12)

3-1 3-2

2-32-1 2-2

✎ Place a soft cloth over the table to protect the TV, and then place

the TV on the cloth screen-side down. ✎ Insert the Stand Guide into the slot on the bottom of the T V. ✎ Slide and assemble it to the end line in the direction of arrow.

When the declination happened, try reassemble it 2 category.

✎ Make sure to assembling stand guide attached on the TV.

✎ Progress the assembly of screw in the manual’s order.

English

HG32ED690 / HG40ED690 / HG48ED690 / HG55ED690

Tight the bottom screw ﬁrst, and upper screw last.

32"

x3 (M4 X L12)

(M4 X L12)

1-1

1-2

1-3

2-32-1 2-2

✎ Place a soft cloth over the table to protect the TV, and then

place the TV on the cloth sc reen-side down. ✎ Insert the Stand Guide into the slot on the bottom of the T V. ✎ Slide and assemble it to the end line in the direction of arrow.

3-1

3-2

40" ~ 55"

x4 (M4 X L12)

✎ Progress the assembly of screw

in the manual’s order.

When the declination happened, try reassemble it

✎ Make sure to assembling stand guide attached on the TV.

category.

✎ NOTE

• Make sure to distinguish between the front and back of each component when assembling them.

• Make sure that at least two persons lift and move the TV.

English

Assembling the swivel (32 inch TVs or larger)

] WARNING: If you conﬁgure the TV to swivel, you must attach it securely to the ﬂoor, a desk, a dresser top, etc. as

The 32” and larger LED TVs have swivel stands. You can conﬁgure these stands so that the TVs swivel 20 degrees left and right, 60 degrees left and right, or 90 degrees left and right using the BRACKET HOLDER SWIVEL.

described in the installation instructions.

¦ 20° Swivel

To conﬁgure the TV so that it swivels 20° left and right, insert the prong on the bottom of the stand through the curved hole in the Bracket Holder Swivel marked 20°. Then, ﬁx the Bracket Holder Swivel to the stand using the three supplied screws as shown below.

¦ 60° Swivel

To conﬁgure the TV so that it swivels 60° left and right, insert the prong on the bottom of the stand through the curved hole in the Bracket Holder Swivel marked 60°. Then, ﬁx the Bracket Holder Swivel to the stand using the three supplied screws as shown below.

¦ 90° Swivel

To conﬁgure the TV so that it swivels 90° left and right, remove the Bracket Holder Swivel, and then screw the three supplied screws into the stand as shown below.

English

¦ Hotel Mount Kit

Short Bolt (2EA) Long Bolt (2EA) Nut (2EA) Washer (2EA)

Top

Afﬁx the stand to a ﬂat surface such as a

Bottom

dresser top, desk top, or entertainment centre as shown.

Bolt + Nut

[

WARNING: To prevent injury, you must attach this TV securely to the ﬂoor, a table, a dresser top, etc. with the Hotel Mount Kit as described in these instructions.

English

HG28ED690**

HG32ED690** HG40ED690** HG48ED690** HG55ED690**

Viewing the Connection Panel

HDMI IN 3

HDMI IN 1

LAN

HDMI IN 2

(ARC)

(DVI)

DIGITAL

AUDIO OUT

(OPTICAL)

CLOCK

HDMI IN 3

HDMI IN 1

HDMI IN 2

(ARC)

(DVI)

DIGITAL

AUDIO OUT

(OPTICAL)

CLOCK

LAN

✎ Whenever you connect an external device to your TV, make sure that power on the unit is turned off. ✎ When connecting an external device, match the colour of the connection terminal to the cable.

AV IN

– Connect audio cables to "R-AUDIO-L" on your TV and the other ends to corresponding audio out jacks on an A/V

device.

– Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of the TV set and the other ends to

corresponding audio out jacks on the external device.

– When connecting to AV IN, the colour of the AV IN [Y/VIDEO] jack (Green) does not match the colour of the video

cable (Yellow).

English

USB (5V 0.5A), USB (HDD/1.0A) / CLONING

– Connector for software upgrades and Media Play, etc. – Service connection.

HDMI IN 1, 2(ARC), 3(DVI)

Connects to the HDMI jack of a device with an HDMI output.

✎ No sound connection is needed for an HDMI-HDMI connection. HDMI connections carry both audio and video. ✎ Use the HDMI IN 3(DVI) jack for a DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI

adapter (DVI to HDMI) for the video connection and the PC/DVI AUDIO IN jacks for audio.

LAN

Connect to a wired LAN using CAT 7 cable.

ANT IN (SATELLITE), (AIR/CABLE)

– To view television channels correctly, the TV must receive a signal from one of the following sources: – An outdoor antenna / A cable television system

HEADPHONE JACK

Headphones may be connected to the headphone jack on your TV. While the headphones are connected, the sound from the built-in speakers is disabled.

RJP

This port is an RJP (Remote Jack Pack) communication port that enables connecting different devices to additional modules to improve device use and convenience.

Display Modes

You can also select one of the standard resolutions listed in the Resolution column. The TV will automatically adjust to the resolution you choose.

After connecting a computer to the TV, set the screen resolution for the TV on the computer. The optimal resolution is 1920 x 1080 @ 60 Hz. If it is set to any other than in the table below, the TV may display nothing. Set the resolution properly, referring to the user guide of the computer or its graphic card.

The resolutions in the table are recommended.

✎ Optimal resolution is 1366 X 768 @ 60 Hz.

Mode Resolution

IBM

MAC

VESA CVT

VESA DMT

VESA GTF 1280 x 720 52.500 70.000 89.040 -/+

English

640 x 350 720 x 400 640 x 480 832 x 624 720 x 576

1280 x 720

640 x 480 640 x 480 640 x 480 800 x 600 800 x 600

800 x 600 1024 x 768 1024 x 768 1024 x 768 1280 x 720 1366 x 768

Horizontal Frequency

(KHz)

31.469

35.000

49.726

35.910

56.456

31.469

37.500

37.861

37.879

46.875

48.077

48.363

56.476

60.023

45.000

47.712

Vertical Frequency

(Hz)

70.086

70.087

66.667

74.551

59.950

74.777

59.940

75.000

72.809

60.317

75.000

72.188

60.004

70.069

75.029

60.000

60.015

Pixel Clock Frequency

(MHz)

25.175

28.322

30.240

57.284

32.750

95.750

25.175

31.500

40.000

49.500

50.000

65.000

75.000

78.750

74.250

85.500

Sync Polarity (H / V)

+/-

-/+

-/-

-/+

-/-

-/+/+ +/+ +/+

-/-

-/+/+ +/+ +/+

✎ Optimal resolution is 1920 X 1080 @ 60 Hz.

Mode Resolution

IBM 720 x 400 31.469 70.087 28.322 -/+

MAC

VESA DMT

640 x 480 832 x 624

1152 x 870

640 x 480 640 x 480 640 x 480 800 x 600 800 x 600

800 x 600 1024 x 768 1024 x 768 1024 x 768 1152 x 864

1280 x 1024 1280 x 1024

1280 x 720 1280 x 800 1280 x 960 1366 x 768 1440 x 900

1600 x 900RB

1680 x 1050 1920 x 1080

Horizontal Frequency

(KHz)

35.000

49.726

68.681

31.469

37.861

37.500

37.879

48.077

46.875

48.363

56.476

60.023

67.500

63.981

79.976

45.000

49.702

60.000

47.712

55.935

60.000

65.290

67.500

Vertical Frequency

(Hz)

66.667

74.551

75.062

59.940

72.809

75.000

60.317

72.188

75.000

60.004

70.069

75.029

75.000

60.020

75.025

60.000

59.810

60.000

60.015

59.887

60.000

59.954

60.000

Pixel Clock Frequency

(MHz)

30.240

57.284

100.000

25.175

31.500

40.000

50.000

49.500

65.000

75.000

78.750

108.000

135.000

74.250

83.500

108.000

85.500

106.500

108.000

146.250

148.500

Sync Polarity

✎ When using an HDMI/DVI cable connection, you must use the HDMI IN 3(DVI) jack. ✎ The interlace mode is not supported. ✎ The set might operate abnormally if a non-standard video format is selected. ✎ Separate and Composite modes are supported. SOG is not supported.

PC/ DVI AUDIO IN

Connects to the audio input jacks on an Ampliﬁer/Home Theatre.

PC IN

Connect to the video output jack on your computer.

VOL-CTRL

Used to control the volume of the Bathroom speaker. Connect the Bathroom Wall Box and the VOLCTRL port.

VARIABLE AUDIO OUT

Used for the audio output to the Bathroom speaker. Connect the Bathroom Wall Box and the Variable port (RCA).

CLOCK

Set the time after connecting the cable of the External Clock to Clock jack. You can use the External Clock Display function.

DATA

– Used to support data communication between the TV and the SBB. – Connects using RJ-12 TV type plugs.

DIGITAL AUDIO OUT (OPTICAL)

Connects to a Digital Audio component.

HP-ID

Connect the cable to HP-ID and Headphone Jack simultaneously and connect it to separated Headphone Box. See page 20. When connecting Headphone to Headphone Box, it works same as Headphone function.

(H / V)

-/-

-/+/+ +/+ +/+

-/-

-/+/+ +/+ +/+ +/+ +/+

-/+ +/+ +/+

-/+ +/+

English

TV Controller

TV Controller is a multi directional button that helps navigate without using the remote control.

✎ Some functions which require a PIN code may not be available. ✎ The product colour and shape may vary, depending on the model. ✎ Exits the menu when pressing the controller for more than 1 second. ✎ When selecting the function by moving the controller to the up/down/left/right directions, do not press the controller. If

the controller is used first, you cannot operate it to move the up/down/left/right directions.

Function menu

TV Controller

The image is drawn by facing

the front side of the TV.

Remote control sensor

Power on Turn the TV on by pressing the controller in standby mode.

Adjusting the volume Adjust the volume by moving the controller from side to side when the power is on.

Selecting a channel Select a channel by moving the controller up and down when the power is on.

Using the function menu Press the controller when the power is on and the function menu appears. If you press

Using the Menu

Selecting the Source

Selecting the SMART HUB ( ™ )

Power Off

✎ To close the Menu, SMART HUB, or Source, press the Controller for more than 1 second.

it again, the function menu screen disappears.

Selects the MENU(m) by moving the controller in the function menu screen. The OSD(On Screen Display) of your TV’s feature appears.

Selects the Source(s) by moving the controller in the function menu screen. The Source list screen appears.

With the Function menu visible, select SMART HUB (™) by moving the Controller upwards. The SMART HUB main screen appears. Select an application by moving the Controller, and then pressing the Controller.

Selects the Power Off(P) to turn the TV off by moving the controller in the function menu screen.

Standby mode

Do not leave your TV in standby mode for long periods of time a small amount of electric power is still consumed even when the power button is such as when on holiday. off. It is best to unplug the power cord.

English

Viewing the Remote Control

✎ This remote control has Braille points on the

impaired persons.

Turns the TV on and off.

Have direct access to channels.

Alternately selects Teletext, Double

or Mix.

Adjust the volume.

Display channel list on the screen.

Display the main on-screen menu.

Quickly select frequently used

functions.

Select on-screen menu items and

change menu values.

Power, Channel

HOME

, and Volume buttons and can be used by visually

SOURCE

GUIDE

CONTENT

CLOCK

Display and select available video sources.

Electronic Programme Guide (EPG) display.

Cut off the sound temporarily.

Change channels.

Switch to the HOME Screen.

View the Contents Home.

Press to display information on the TV screen.

CLOCK: When you press INFO key

in standby mode, TV screen displays the time.

Return to the previous menu.

Buttons in the Channel list,

Contents Home menu, etc.

ALARM: Enter the hour you want the

TV to turn on.

X: Turns the 3D image on or off.

( Not available )

SUBT.: Displays digital subtitles.

ALARM

Exit the menu.

Use these buttons in the Contents Home.

English

Installing batteries (Battery size: AAA)

✎ NOTE

• Use the remote control within 7m of the TV.

• Bright light may affect the performance of the remote control. Avoid using nearby special ﬂuorescent light or neon

signs.

• The colour and shape may vary depending on the model.

• Remote control button 'HOME' & '3D' are not supported. When pressing these buttons, the TV unit does not

respond.

English

Samsung Smart Control (sold separately)

✎ Colours and shape may vary depending on the model.

¢: Turns the sound on/off.

AD: Press and hold this button

to bring up the Accessibility Shortcuts panel. Select the

options to turn them on or off.

MIC: Use the microphone with the Voice Control and Voice functions.

– The Voice Control function can be af fected by unclear pronuncia-

tion, voice level, or surrounding noise.

Turns the TV on/off.

SEARCH: Press this button to use the search window. (Not availabl) KEYPAD: With the virtual remote control on the screen, you can easily

enter digits, control content, and use functions.

SOURCE: Changes the source. VOICE: Starts voice recognition. When the microphone icon appears on

the screen, say a voice command into the microphone. Say "Help" to learn about basic usage and voice commands.

– Say a voice command 10cm to 15cm from the microphone and at

an appropriate volume.

Changes the channel.

Changes the volume.

– Touchpad: Place a finger on the touch pad and move the Samsung

Smart Control. The pointer on the screen moves in the direction and as much as the Samsung Smart Control is moved. Press the touchpad to run the focused item.

– < > ¡ £: Moves the pointer or focus.

RETURN: Returns to the previous menu. Additionally, when you press

this button while watching TV, you can return to the previous channel.

EXIT: Press and hold this button to exit all currently running applications.

SMART HUB: Launches Smart Hub. Pressing SMART HUB while an

application is running terminates the application.

GUIDE: Displays the digital channel broadcasting schedule.

Channel List: Press and hold to launch the Channel List.

Use these buttons with speciﬁc features. Use these buttons according to the directions on the TV screen.

¥:Enable Football Mode for an optimal sports viewing experience.

M.SCREEN: You can split the TV screen and use various functions such as watching TV, surﬁng the web, watching

video, and so on. For more information, refer to the e-Manual.

Colours button: Use these colour buttons to access additional options speciﬁc to the feature in use.

– MENU: Press and hold to display a menu on the screen. – REC: Press and hold to record the broadcast. – INFO: Press and hold to view information about the current digital channel or media file.

English

Inserting Batteries into Samsung Smart Control

To use Samsung Smart Control, ﬁrst refer to the ﬁgure below and insert batteries into the unit.

Gently pull on the battery cover's notch and then remove the cover completely once it comes loose. Insert 2 AA alkaline batteries, making sure to align the positive and negative polarities correctly.

¦ Using the Samsung Smart Control

Samsung Smart Control makes it even easier and more convenient to use the TV. Pressing the KEYPAD button displays a virtual remote control that allows you to easily enter digits, control content, and activate functions on the screen.

– We recommend using Samsung Smart Control at a distance of less than 6m. A usable distance may differ depending

on the wireless environmental conditions.

Pairing the Samsung Smart Control

To control the TV with Samsung Smart Control, you need to pair Samsung Smart Control to the TV via Bluetooth. Pair Samsung Smart Control to the TV.

– Samsung Smart Control can only be paired to a single TV.

Point Samsung Smart Control at the remote control sensor of the TV and press the TV button to turn the TV on.

– Remote control receiver’s location may vary depending on the model.

Reconnecting Samsung Smart Control

If the Samsung Smart Control stops operating or works abnormally, replace the batteries as this may be due to insufﬁcient battery power.

If the problem persists, the Samsung Smart Control restores pairing with the TV.

1. Press RETURN button and GUIDE button simultaneously for 3 seconds. – You must place the Samsung Smart Control approximately 30cm ~ 40cm away from the T V and ensure it is

pointing towards the remote control receiver.

2. Connection image is appeared on the screen. And then, Samsung Smart Control is connecting to TV automatically.

English

When you see this alarm icon on the screen...

Following alarm icon indicates Samsung Smart Control's batteries are low. If the alarm icon pops up, replace the batteries. Samsung recommends using alkaline batteries for a longer operating life.

Using the TV by Moving the Samsung Smart Control

The Samsung Smart Control has a motion sensor (gyro sensor) that allows you to easily control the TV by holding and moving the Samsung Smart Control.

After placing a ﬁnger on the touchpad, a pointer appears on the screen. Hold and move the Samsung Smart Control. The pointer moves the same way the Samsung Smart Control is moved. It's also possible to scroll up and down on scrollable screens.

– If you remove the finger from touchpad, the screen pointer disappears.

Using the TV with the Touchpad

Navigate to the Support menu and select the Smart Control Tutorial option to learn how to use the touchpad, following the on screen instructions.

Moving the Focus/Pointer

Press the directional buttons (up, down, left, and right) to move the pointer or focus in the direction.

Menu Access & Item Selection

Press the touchpad. This lets you access a TV menu or select an item.

Displaying the Context-sensitive Menu on Smart Hub

Press and hold on the touch pad from the Smart Hub screen. The Options menu available to the selected item appears.

– The Options menu depends on the context.

Moving to the Smart Hub panel

On the Smart Hub screen, drag left or right on the touchpad. This will move the Smart hub panels left or right.

Scrolling on the Web Browser

Drag up/down on the touchpad in the web browser screen. This scrolls through the web screen.

English

Connecting the TV with SBB

CLOCK

CON BCON A

STB SIDETV SIDE

CON A

6: NC 5: IR 4: GND 3: Rx 2: Tx 1: Nc

1: NC 2: GND 3: Rx 4: NC 5: Tx 6: IR

CON B

CON ACON B

TV Rear Panel

ETH MODEM

Data Cable

1. Connect the D ATA jack of the TV to the [ETH MODEM] jack of the STB (SBB) with the Data cable.

✎ Use data communication.

¦ List of Vendors and Compatible Data Cables Supplied with the TV

• Conﬁrm that you are using the correct data cable for your vendor. Refer to the code label on the data cables.

English

Connecting the Bathroom Speakers

You can connect the Bathroom Speakers using the following method.

¦ Connecting through the Variable Output (available without an external ampliﬁer)

TV Rear Panel

Speaker

VOL+

VOL

Volume Control Box

1. Connect the VARIABLE AUDIO OUT port of the TV to the Bathroom Wall Speakers of the hotel.

Speaker +

Speaker -

N/C

2. Connect the VOL-CTRL jack of the TV to the Volume Control Box Switch port on the Bathroom Wall of the hotel.

✎ The maximum speaker output is 4W, 8Ω. ✎ The VARIABLE AUDIO OUT port supports MONO sound out only.

• Installing the Volume Control – If you configure the Volume Control Box as shown in the figure, you can control the volume of the bathroom

speakers. – The jack that connects the Volume Control Box to the TV is a 3.5mm normal Phone jack. – Volume Control Box switch is a Tact switch. – Setting the Sub AMP Mode – 0: Turns the Sub AMP function off (PWM off). – 1: Determines the Sub volume according to the main volume control. the sub volume is determined according to

the Power On Volume, the Min Volume, and the Max Volume values of Hotel Mode. – 2: Determines the volume according to the bathroom control panel setting.

• Variable Output Port Speciﬁcations – Speaker Wire: Use speaker cable no more than 82 feet (25m) in length.

( Black /Red

VOL - DOWN

( White 1 )

VOL - UP

GND ( Shield Wire

)

Volume Control Box

VOL +

VOL

English

¦ Audio Loop In

An additional Headphone Box can be installed on a bed or business desk for added convenience. The installation procedures are given below.

• Detailed Drawing of the Headphone Box.

TV Rear Panel

HEADPHON BOX

Headphone Box

TV HP-ID jack

Shield wire

Red Wire (Audio-R)

Red wire + White wire

TV Headphones jack

Whitewire (Audio-L)

Shield Wire

English

Connecting the MediaHub HD

DIG

AUDIO OUT

(

LAN

Output to any external source connected to MediaHub HD on the hotel desk.

MediaHub HD Rear

USB RS/232

HDMI

HDMI cable

RS-232

Data Cable

HDMI IN 1

HDMI IN 3

(DVI)

DIGITAL

AUDIO OUT

OPTICAL)

(OPTICAL)

HDMI IN 2

(ARC)

LAN

ITA

TV Rear Panel

CK L

CLOCK

1. Connect the RJP port of the TV and the RS/232 port of the MediaHub HD.

2. Connect the HDMI IN 1, 2(ARC) or 3(DVI) port of the TV and the HDMI port of the MediaHub HD.

•MediaHub HD

– The MediaHub HD is a hardware module that has different Audio Video inputs (A/ V, Audio, PC, HDMI and USB)

and corresponding outputs. The corresponding output sources connect from MediaHub to the TV. MediaHub communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests to connect an external source to the MediaHub. MediaHub communicates with the TV by sending messages regarding Active/Inactive

sources. The TV switches to the Active external source. – You have to connect the HDMI of the MediaHub to the HDMI IN 3(DVI) port of the TV. – When the T V is on, connect the TV and the RJP within 10 seconds.

• Special features – PIP – Auto Detection

English

Connecting the RJP (Remote Jack Pack)

AUDIO OUT

(

)

LAN

Output to any exter nal source connected to RJP on the hotel desk.

RJP Rear

USB HDMI VIDEO

AUDIOAUDIO/PC

RS/232

Video Cable

Audio Cable

HDMI cable

HDMI IN 3

HDMI IN 2

(ARC)

TV Rear Panel

(DVI)

DIGITAL

AUDIO OUT

OPTICAL

(OPTICAL)

CLOCK

D-sub / PC Audio cable

HDMI IN 1

LAN

1. Connect the PC IN / PC/DVI AUDIO IN port of the TV to the PC/AUDIO port of the RJP.

2. Connect the AV IN [VIDEO]/[L-AUDIO-R] port of the TV to the VIDEO port of the RJP.

3. Connect the AV IN [VIDEO] port of the TV to the VIDEO port of the RJP.

4. Connect the HDMI IN 1, 2(ARC) or 3(DVI) port of the TV and the HDMI port of the RJP.

5. Connect the RJP port of the TV and the RS/232 port of the RJP.

✎ The RJP (Remote Jack Pack) compatible with this Samsung TV is TeleAdapt TA-7610, TA-7650 (HD) and TA-7660

(HD Plus).

• RJP (Remote Jack Pack): RJP stands for Remote Jack Pack. The RJP is a hardware module that has different Audio

Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding output sources are connected from RJP to TV. The RJP communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests to connect an external source to the RJP. The RJP communicates with the TV by sending messages regarding Active/ Inactive sources. The TV will switch to the Active external source according to the priority set by the User.

✎ You can select HDMI IN 1, 2(ARC) or 3(DVI) and AV IN for connecting RJP. ✎ When the T V is on, connect the TV and the RJP within 10 seconds.

English

• The RJP can be returned to the factory default settings by pressing the A/V and HDMI buttons simultaneously for 10

seconds. All LEDs blink 5 times to acknowledge that this has been ﬁnished.

• The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room. The

LEDs that were turned off will turn on again if the guest touches any of the buttons and the 5 minute timer will restart. If the guest then touches another source button, the TV will change to the selected source and the corresponding LED will be lit.

• After an RJP Reset or a TV Power OFF/ON, it takes approx. 10 seconds to establish communications between the TV

and the RJP.

• The following table shows the approximate time in seconds to switch from the TV to the input source, based on the

priority.

✎ Scenario 1: When no inputs are connected.

Source To Connect

AV 2 Sec

PC 0.7 Sec

HDMI 3.9 Sec

✎ Scenario 2: When two or more inputs are connected and an Input source is disconnected and then reconnected.

Source Disconnect To Connect Total

AV 4.5 Sec 2 Sec 6.5 Sec

PC 0.7 Sec 0.7 Sec 1.4 Sec

HDMI 3.9 Sec 3.9 Sec 7.8 Sec

✎ E.g. If the RJP has all its live sources AV, PC and HDMI connected, AV is viewed as the highest priority. If the RJP is

in HDMI mode, and a guest removes and reconnects the AV, the minimum time required to switch to the AV is 6.5 seconds.

• To connect audio (Ipod or Mp3), Music mode should be ON and Jack Ident detect should be OFF.

• A/V, PC and HDMI input sources are supported.

English

+ 51 hidden pages