Samsung HG46NB678FFXZA User Manual

LED TV

Installation manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Model Serial No.

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and speciﬁcations may be changed without notice.

Introduction

This TV B2B (Business to Business) model is designed for hotels or the other hospitality businesses, supports a variety of special functions, and lets you limit some user (guest) controls. If the LodgeNet system is already installed at your location, you do not need to install the LodgeNet Set-Top Box. (For more information about the LodgeNet system or the LodgeNet Set-Top Box, please contact your nearest dealer or LodgeNet.)

Operational Modes

This TV has two modes : Interactive and Stand-alone mode.

• Interactive mode : In this mode, the TV communicates with and is fully or partially controlled by a connected Set Back Box (SBB) or Set Top Box (STB) provided by a hospitality SI (System Integration) vendor. When the TV is initially plugged in, it sends a command that attempts to identify the SSB or STB connected to it. If the TV identiﬁes the SBB or STB and the SBB or STB identiﬁes the TV, the TV gives full control to the SBB or STB.

• Stand-alone mode : In this mode, this TV works alone without an external SBB or the STB.

The TV has a Hotel (Hospitality) Menu that lets you easily set its various hospitality functions. Please see pages 16 to 20. The Menu also lets you activate or de-activate some TV and hospitality functions so you can create your optimal hospitality conﬁguration.

Still image warning

Avoid displaying still images (such as jpeg picture ﬁles) or still image elements (such as TV channel logos, panorama or 4:3 format images, stock or news bars or crawls) on the screen. Displaying still pictures continually can cause uneven screen wear, which will affect image quality. To reduce the chance that this effect will occur, please follow the recommendations below:

• Avoid displaying the same TV channel for long periods.

• Always try to display a full screen image.

• Reduce brightness and contrast to help to prevent the occurrence of after-images.

• Frequently use all TV features designed to reduce image retention and screen burn-in. Refer to the proper user manual section for details.

Ensuring Proper Ventilation

When you install the TV, maintain a distances of at least 4 inches between the TV and other object (walls, cabinet sides, etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a ﬁre or problems with the product caused by an increase in its internal temperature.

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

✎

Using parts provided by another manufacturer may cause difﬁculties with the product or result in injury caused by the product falling.

✎

Installation with a stand. Installation with a wall-mount.

4 inches

4 inches4 inches

4 inches

4 inches4 inches

Additional Information

The appearance of the TV and its accessories may differ from the illustrations in this manual, depending on the TV.

✎

Be careful when the you touch the TV. Some parts can be hot.

✎

4 inches

Contents

y Introduction .............................................................................................................................................................. 2

y Operational Modes ...................................................................................................................................................2

y Still image warning .................................................................................................................................................... 2

y Ensuring Proper Ventilation .......................................................................................................................................2

y Additional Information ...............................................................................................................................................2

y Accessories .............................................................................................................................................................. 4

y Installing the LED TV Stand ....................................................................................................................................... 5

y Assembling the swivel stand (32 inch TVs or larger) ..................................................................................................6

y Using the TV's Controller .......................................................................................................................................... 8

y The Connection Panel ............................................................................................................................................... 9

y Using the TV's Controller ........................................................................................................................................ 10

y Connecting the TV to the Lodgenet game controller or a STB of a SI vendor .......................................................... 11

y Connecting the RJP (Remote Jack Pack) ................................................................................................................ 14

y Setting the Hotel Option Data .................................................................................................................................16

y Installing the Wall Mount ......................................................................................................................................... 34

y Securing the TV to the Wall ..................................................................................................................................... 35

y Caution of the cover-jack ........................................................................................................................................ 35

y Anti-theft Kensington Lock ...................................................................................................................................... 36

y Speciﬁcations .........................................................................................................................................................37

y Dimensions ............................................................................................................................................................. 38

English

Accessories

✎

Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.

✎

The items’ color and shape may var y, depending on the model.

✎

The parts for the stand are listed under Stand Components on the following page.

List of Parts

y Remote Control (AA59-00817A) &

Batteries (AAA x 2)

y Hotel Mount Kit y Holder Ring (2EA) (46" only)

y Holder-Wire stand

y Power Cord

y Safety Guide / Quick Setup Guide

(Not available in all locations)

y Assembling the Holder Wire Stand

English

Installing the LED TV Stand

The 32” and larger LED TVs have swivel stands. You can conﬁgure these stands so that the TVs swivel 20 degrees left and right, 60 degrees left and right, or 90 degrees left and right. See page 6.

Components

When installing the stand, use the provided components and parts.

1 EA

y Stand (differs depending

on the model)

1 2

1 EA

y Guide Stand y Screws

(M4 X L12)

Front

Top View

ATTENTION

DO NOT USE

CHEMICALS

GREASE

DO NOT USE

OIL

Side

x7 (M4 X L12)

x8 (M4 X L12, for 40" and above models)

y Security Screws (3EA)

(4EA, for 40" and above

models)

✎

Place a soft cloth over a table to protect the TV, and then place the TV on the cloth screen side down.

✎

Insert the Stand Guide into the slot on the bottom of th e T V.

(M4 X L12)

or or or

(M4 X L12, for 40" and above models)

(Security Screw)

(Security Screw, for 40” and above models)

✎

NOTES

y Make sure to distinguish between the front and back of the Stand and Stand Guide when connecting them. y Make sure that at least two people lift and move the LED TV. y The number of screws may differ depending on the model.

English

Assembling the swivel stand (32 inch TVs or larger)

The 32” and larger LED TVs have swivel stands. You can conﬁgure these stands so that the TVs swivel 20 degrees left and right, 60 degrees left and right, or 90 degrees left and right using the BRACKET HOLDER SWIVEL.

¦ 20° swivel

To conﬁgure the TV so that it swivels 20° left and right, insert the prong on the bottom of the stand through the curved hole in the Bracket Holder Swivel marked 20°. Then, ﬁx the Bracket Holder Swivel to the stand using the three supplied screws as shown to the left.

¦ 60° swivel

To conﬁgure the TV so that it swivels 60° left and right, insert the prong on the bottom of the stand through the curved hole in the Bracket Holder Swivel marked 60°. Then, ﬁx the Bracket Holder Swivel to the stand using the three supplied screws as shown to the left.

¦ 90° swivel

To conﬁgure the TV so that it swivels 90° left and right, remove the Bracket Holder Swivel, and then screw the three supplied screws into the stand as shown to the left.

English

¦ Hotel Mount Kit

Short Bolt (2EA) Long Bolt (2EA) Nut (2EA) Washer (2EA)

Top

Afﬁx the stand to a ﬂat surface such as a

Bottom

dresser top, desk top, or entertainment center as shown.

Bolt + Nut

WARNING:

the Hotel Mount Kit as described in these instructions.

To prevent injury, you must attach this TV securely to the ﬂoor, a table, a dresser top, etc. with

English

Using the TV's Controller

The TV’s Controller, a small joy stick like button on the rear right side of the TV, lets you control the TV without the remote control.

Selecting the Media Play

Selecting the Menu

Return

Power off

✎

The product color and shape may vary depending on the model.

✎

To exit the menu, press the Controller for more than 1 second.

✎

When selecting a function by moving the controller backwards/forwards/left/right, be sure not to press up on the controller. If you press up first, it will not operate correctly.

Standby mode

Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on vacation, for example). It is best to unplug the power cord.

Selecting a Source

Function menu

Remote control sensor

TV Controller

The image is drawn as if you are facing the front side of the TV.

English

The Connection Panel

✎

Whenever you connect an external device to your TV, make sure that the T V and the device are turned off.

✎

When connecting an external device, match the color of the connection terminal to the cable.

HDMI IN 2

(DVI)

HDMI IN 1

USB (5V 0.5A) / CLONING

AV IN

AUDIOVIDEO

HDMI IN

EX-LINK

3 (ARC)

DIGITAL

AUDIO OUT

(OPTICAL)

GAME

CONTROL

DATA

DVI AUDIO IN

AUDIO

OUT

5 6 874

HOSPITALITY TV

ANT IN

AIR/CABLE

1 HDMI IN 1, 2 (DVI), 3 (ARC) : Connects to the HDMI jack of a device with an HDMI output.

✎

No separate sound connection is needed for an HDMI to HDMI connection. HDMI connections carry both audio and video.

✎

Use the HDMI IN 2 jack for a DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter (DVI to HDMI) for the video connection and the DVI AUDIO IN jack for audio. Some DVI or HDMI devices may not or should not need a DVI AUDIO IN connection for audio.

2 USB / CLONING

– Connector for software upgrades and Media Play, etc. – Service connection.

3 VIDEO / L-AUDIO-R

– Connect a VIDEO cable to an appropriate external A/V device such a VCR, DVD, or Camcorder. – Connect audio cables to L-AUDIO-R on your TV and the other ends to corresponding audio out jacks on the A/V

device.

4 DVI AUDIO IN: Connects to the audio out jack of an external DVI device using a 1/8th inch stereo phone jack cable.

Some DVI devices may not or should not need this connection audio.

5 AUDIO OUT: Connects to the audio input jacks on an Ampliﬁer/Home Theater. 6 EX-LINK : Connect this jack to the jack on the optional RJP (Remote Jack Pack). The RJP allows you to connect external

devices (Camcoders, PCs, DVD players, etc) easily.

7 DIGITAL AUDIO OUT (OPTICAL): Connects to a Digital Audio component. 8 ANT IN or AIR/CABLE

– To view television channels correctly, the TV must receive a signal from one of the following sources: – An outdoor antenna / A cable television system / A satellite receiver.

9 GAME CONTROL/DATA

– Used to connect the Lodgenet game controller in the Lodgenet system or support data communication between the TV

and the external SBB or STB.

– Connects using an RJ-12 type of plug.

English

Turns the TV on and off.

Press to access channels directly.

Press to select additional digital channels

being broadcast by the same station. For

example, to select channel ‘54-3’, press

‘54’, then press '-' and ‘3’.

Using the TV's Controller

POWER

Display and select the available video sources.

Return to the previous channel.

Cut off the sound temporarily.

Adjust the volume.

Display the channel list on the screen.

Display the main on-screen menu.

Quickly select frequently used functions.

Select on-screen menu items and change

Return to the previous menu.

SLEEP: Sets the Sleep Timer.

: Turns the 3D image on or off. (Not

CC: Controls the caption decoder.

menu values.

available)

Installing the batteries (Battery size: AAA)

Rear of the Remote

✎

After you have installed the batteries, use a screwdriver to screw in the screw that holds the battery cover closed.

Change channels.

HOME: Display the REACH menu if REACH

has been downloaded to the TV.

SLEEP

HOME

CONTENT

Use these buttons in Contents Home.

Press to display channel and TV information on the TV screen.

Exit the menu.

Use these buttons according to the directions on screen (to perform a function, display a screen, etc.).

Use these buttons in a speciﬁc feature.

Installing Batteries into the Remote (battery size: AAA)

Match the polarity of the batteries to the symbol in the batter compartment.

✎

Note

Use the remote control within 23~33 feet of the TV.

Bright light may affect the performance of the remote

control. Avoid using near fluorescent lights or neon signs. The color and shape of the remote may vary depending on

the model.

English

Connecting the TV to the Lodgenet game controller or a STB of a SI vendor

GAME

CONTROL

DATA

GAME

CONTROL

DATA

TV Rear Panel

ETH MODEM

Data Cable

Game Controller

Data Cable

1. Connect the LodgeNet game controller to the TV’s GAME CONTROLLER/DATA jack.

2. Connect the GAME CONTROLLER/DATA jack of the TV to the ETH MODEM jack of the STB (SBB) with the Data cable.

✎

The "ETH MODEM" jack name that you connect the Data Cable to may differ depending on the SBB or STB type.

TV Rear Panel

English

¦ List of SI Vendors and Compatible Data Cables Supplied with the TV

y Conﬁrm you are using the correct data cable for your SI vendor. Refer to the code label on the data cables. y Contact your nearest dealer or your SI Vendor to buy the data cable not included in the TV.

Conﬁrm the code on the

Note the labeled end. Note the labeled end.

SI Vendor Cable code Pin assign Remark

Samsung

OCC

Enseo

Guest-Tek

NXTV BN39-01011B

nStreams BN39-01110A

BN39-00865B Provided

Code Label

MTI BN39-01011C

English

LodgeNet MTI

Provided

¦ Connecting the Audio Output to an Audio Ampliﬁer

EX-LINK

AUDIO

OUT

AUDIO IN

TV Rear Panel

Audio Ampliﬁer

1 Stereo cable

1. Connect the AUDIO OUT port of the TV to the Audio In port of an audio ampliﬁer with a stereo cable.

English

Connecting the RJP (Remote Jack Pack)

DIGITAL

AUDIO OUT

(OPTICAL)

EX-LINK

AUDIO

OUT

DVI AUDIO IN

HDMI IN

3 (ARC)

(5V 0.5A) / CLONING

USB

HDMI IN 2

(DVI)

HDMI IN 1

AV IN

AUDIOVIDEO

DIG

AUDIO OUT

(

)

OUT

(

)

USB

Connect the input jacks on the TV to the RJP. The RJP lets guests connect audio and video sources to the TV.

3 HDMI cable

TV Rear Panel

USB HDMI S-VIDEO

RCA AUDIO/PC

RS/232

RJP Rear

1 PC Audio cable

2 Video / Audio Cable

1. Connect the DVI AUDIO IN port of the TV to the PC/AUDIO port of the RJP.

2. Connect the AV IN VIDEO/L-AUDIO-R ports of the TV to the RCA port of the RJP.

3. Connect one of the HDMI IN ports of the TV to the HDMI port of the RJP.

4. Connect the EX-LINK port of the TV to the RS/232 port of the RJP.

✎

This Samsung TV is compatible with the Tele Adapt TA-7610 RJP only.

5V 0.5A CLONING

ITA

OPTICAL

AUDIO

English

+ 30 hidden pages