LED TV
Installation manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please
register your product at
www.samsung.com/register
Model Serial No.
[HC460-ZA]Install-Guide-X0ENG.indd 1 2014-06-05 10:39:04
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance. Product design and specifications may be changed without notice.
Introduction
This TV B2B (Business to Business) model is designed for hotels or the other hospitality businesses, supports a variety of
special functions, and lets you limit some user (guest) controls.
Operational Modes
This TV has one mode:Stand-alone mode.
• Stand-alone mode : In this mode, this TV works alone without an external SBB or the STB.
The TV has a Hotel (Hospitality) Menu that lets you easily set its various hospitality functions. Please see pages 17 to 21.
The Menu also lets you activate or de-activate some TV and hospitality functions so you can create your optimal hospitality
configuration.
Still image warning
Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama or 4:3
format images, stock or news bars or crawls) on the screen. Displaying still pictures continually can cause uneven screen
wear, which will affect image quality. To reduce the chance that this effect will occur, please follow the recommendations
below:
• Avoid displaying the same TV channel for long periods.
• Always try to display a full screen image.
• Reduce brightness and contrast to help to prevent the occurrence of after-images.
• Frequently use all TV features designed to reduce image retention and screen burn-in. Refer to the proper user
manual section for details.
Ensuring Proper Ventilation
When you install the TV, maintain a distances of at least 4 inches between the TV and other object (walls, cabinet sides, etc.)
to ensure proper ventilation.
Failing to maintain proper ventilation may result in a fire or problems with the product caused by an increase in its internal
temperature.
✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.
✎ Using parts provided by another manufacturer may cause difficulties with the product or result in injury caused by the
product falling.
Installation with a stand Installation with a wall-mount
4 inches4 inches
4 inches
4 inches4 inches
4 inches
4 inches
Additional Information
✎ The appearance of the TV and its accessories may differ from the illustrations in this manual, depending on the TV.
✎ Be careful when the you touch the TV. Some parts can be hot.
[HC460-ZA]Install-Guide-X0ENG.indd 2 2014-06-05 10:39:04
3
Contents
ENGLISH
English
y Introduction ................................................................................................................................................. 2
y Operational Modes ...................................................................................................................................... 2
y Still image warning ....................................................................................................................................... 2
y Ensuring Proper Ventilation .......................................................................................................................... 2
y Additional Information .................................................................................................................................. 2
y Accessories ................................................................................................................................................. 4
y Installing the LED TV Stand.......................................................................................................................... 5
y Using the TV's Controller ............................................................................................................................. 6
y The Connection Panel ................................................................................................................................. 7
y Using the TV's Controller ............................................................................................................................. 8
y Connecting the RJP (Remote Jack Pack) .................................................................................................. 10
y Setting the Hotel Option Data .................................................................................................................... 12
y Installing the Wall Mount ............................................................................................................................ 31
y Securing the TV to the Wall ........................................................................................................................ 32
y Anti-theft Kensington Lock ........................................................................................................................ 33
y Specifications ............................................................................................................................................ 34
y Dimensions ................................................................................................................................................ 35
[HC460-ZA]Install-Guide-X0ENG.indd 3 2014-06-05 10:39:04
4
English
Accessories
✎ Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
✎ The items’ color and shape may vary, depending on the model.
✎ The parts for the stand are listed under Stand Components on the following page.
✎ The provided accessories may vary depending on the model.
List of Parts
Remote Control (AA59-00817A) & Batteries (AAA x 2) Power Cord
Safety Guide / Quick Setup Guide (Not available in all locations) Holder-Wire stand 1(EA)
[HC460-ZA]Install-Guide-X0ENG.indd 4 2014-06-05 10:39:04
5
English
Installing the LED TV Stand
Components
When installing the stand, use the provided components and parts.
A
1 EA
B
1 EA
C
x 4 (M4x12)
x 4 (M4x14)
Stand
(differs, depending on the model)
Guide Stand Screws
✎ Place a soft cloth over the table to protect
the TV, and then place the TV on the cloth
screen-side down.
✎ Insert the Stand Guide into the slot on the
bottom of the TV.
1
3
2
B
A
Front
TOP View
DO NOT USE
OIL
DO NOT USE
GREASE
DO NOT USE
CHEMICALS
ATTENTION
C
(M4 x 14)
x4
C
(M4 x 12)
x4
✎ NOTE
• Make sure to distinguish between the front and back of the Stand and Stand Guide when connecting them.
• Make sure that at least two people lift and move the LED TV.
• The number of screws may differ depending on the model.
[HC460-ZA]Install-Guide-X0ENG.indd 5 2014-06-05 10:39:06
6
English
Using the TV's Controller
The TV’s Controller, a small joy stick like button on the rear right side of the TV, lets you control the TV without the remote
control.
TV Controller
The image is drawn
as if you are facing the
front side of the TV.
Power off
Function menu
Remote control sensor
Return
Selecting the
Media Play
Selecting the
Menu
Select a source.
✎ The product color and shape may vary depending on the model.
✎ To exit the menu, press the Controller for more than 1 second.
✎ When selecting a function by moving the controller backwards/forwards/left/right, be sure not to press up on the
controller. If you press up first, it will not operate correctly.
Standby mode
Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe
and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on
vacation, for example). It is best to unplug the power cord.
[HC460-ZA]Install-Guide-X0ENG.indd 6 2014-06-05 10:39:06
7
English
The Connection Panel
HC460 Model
- SIDE -
1
(5V 0.5A)
/ CLONING
ANT IN
5
4
HDMI IN
(DVI)
7 6
EX-LINK
AV IN
AUDIO
VIDEO
2
3
PC / DVI
AUDIO IN
PC IN
✎ Whenever you connect an external device to your TV, make sure that the TV and the device are turned off.
✎ When connecting an external device, match the color of the connection terminal to the cable.
1 USB (5V 0.5A) / CLONING
– Connector for software upgrades and Media Play, etc.
– Service connection.
2 PC/ DVI AUDIO IN: Connects to the audio input jacks on an Amplifier/Home Theater.
3 PC IN: Connect to the video output jack on your computer.
4 ANT IN, (AIR/CABLE)
– To view television channels correctly, the TV must receive a signal from one of the following sources:
– An outdoor antenna / A cable television system
5 HDMI IN: Connects to the HDMI jack of a device with an HDMI output.
✎ No sound connection is needed for an HDMI-HDMI connection. HDMI connections carry both audio and video.
✎ Use the HDMI IN (DVI) jack for a DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI
adapter (DVI to HDMI) for the video connection and the PC/DVI AUDIO IN jacks for audio.
6 AV IN
– Connect the RCA audio cables (optional) to [R - AUDIO - L] at the back of the TV set and the other ends to the
corresponding audio out jacks on the DVD Player.
7 EX-LINK: Connect this jack to the jack on the optional RJP (Remote Jack Pack). The RJP allows you to connect
external devices (Camcoders, PCs, DVD players, etc) easily.
[HC460-ZA]Install-Guide-X0ENG.indd 7 2014-06-05 10:39:06
8
English
Using the TV's Controller
HOME
CONTENT
CH
LIST
ALARM
SLEEP CC
CHVOL
¢
Turns the TV on and off.
Display and select the available video
sources.
Return to the previous channel.
Change channels.
Use these buttons in Contents Home.
Exit the menu.
Press to display channel and TV
information on the TV screen.
SLEEP: Sets the Sleep Timer.
X: Turns the 3D image on or off.
(Not available)
CC: Controls the caption decoder.
Cut off the sound temporarily.
Press to access channels directly.
Adjust the volume.
Display the channel list on the screen.
Display the main on-screen menu.
HOME: Display the REACH menu if
REACH has been downloaded to the TV.
(HC678 none)
Quickly select frequently used functions.
Return to the previous menu.
Use these buttons in a specific feature.
Select on-screen menu items and
change menu values.
Press to select additional digital
channels being broadcast by the same
station. For example, to select channel
‘54-3’, press ‘54’, then press '-' and ‘3’.
Use these buttons according to the
directions on screen (to perform a
function, display a screen, etc.).
[HC460-ZA]Install-Guide-X0ENG.indd 8 2014-06-05 10:39:07
9
English
Installing the batteries (Battery size: AAA)
Rear of the Remote
✎ After you have installed the batteries, use a screwdriver to screw in the screw that holds the battery cover closed.
Installing Batteries into the Remote (battery size: AAA)
Match the polarity of the batteries to the symbol in the batter compartment.
✎ NOTE
• Use the remote control within 23~33 feet of the TV.
• Bright light may affect the performance of the remote control. Avoid using near fluorescent lights or neon signs.
• The color and shape of the remote may vary depending on the model.
[HC460-ZA]Install-Guide-X0ENG.indd 9 2014-06-05 10:39:07
10
English
Connecting the RJP (Remote Jack Pack)
Connect the input jacks on the TV to the RJP. The RJP lets guests connect audio and video sources to the TV.
HC460 Model
(5V 0.5A)
/ CLONING
ANT IN
PC / DVI
AUDIO IN
PC IN
(5V 0.5A
)
/
CLONIN
G
ANT IN
PC / DV
I
AUDIO IN
PC I
N
HDMI IN
(DVI)
EX-LINK
AV IN
AUDIO
VIDEO
USB HDMI S-VIDEO
RCA AUDIO/PC
RS/232
TV Rear Panel
1 Video / Audio Cable
RJP Rear
3
2 HDMI Cable
[HC460-ZA]Install-Guide-X0ENG.indd 10 2014-06-05 10:39:07
11
English
1. Connect the AV IN VIDEO/L-AUDIO-R ports of the TV to the RCA port of the RJP.
2. Connect one of the HDMI IN ports of the TV to the HDMI port of the RJP.
3. Connect the EX-LINK port of the TV to the RS/232 port of the RJP.
✎ This Samsung TV is compatible with the Tele Adapt TA-7610 RJP only.
• RJP (Remote Jack Pack): The RJP is a hardware module that has different Audio Video inputs (A/V, Audio, PC
and HDMI) and corresponding outputs. The corresponding outputs are connected from the RJP to the TV. The RJP
communicates with the TV via RS232. The RJP communicates with the TV by sending messages regarding Active/
Inactive sources.
– A group of hotel menu items let you assign numbered priorities to the jacks of the RJP. (See page 14). 1 is the highest
priority and 3 is the lowest. When a guest connects external sources to the RJP jacks, the TV will automatically
switch between sources based on the priority you have assigned them in the Menu. For example, lets say AV is set to
1 and HDMI to 2. If a guest has attached a device to the HDMI jack, and then plugs a device into the AV jack, the TV
automatically switches to the device plugged into the AV jack (the jack with the higher priority). Note that a guest can
also switch between devices manually by pushing a button on the RJP.
✎ When you set up the RJP, connect the RJP to HDMI or AV.
• To reset the RJP to its factory default state, press the AV and HDMI buttons simultaneously for 10 seconds. When all
button LEDs blink 5 times, the RJP reset is complete.
• The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room.
The LEDs that were turned off will turn on again if the guest touches any of the buttons and the 5 minute timer will
restart. If the guest then touches another source button, the TV will change to the selected source and the corresponding LED will be lit.
• After an RJP Reset or a TV Power OFF/ON, it takes approximately 10 seconds to establish communications between
the TV and the RJP.
• The following table shows the approximate time in seconds it takes to switch from the TV to an input source, based
on assigned or default priorities.
✎ Scenario 1 : When no inputs are connected.
Source To Connect
AV 2 Sec
PC 0.7 Sec
HDMI 3.9 Sec
✎ Scenario 2: When two or more inputs are connected to the RJP and one of the input sources is disconnected and
then reconnected.
Source Disconnect To Connect Total
AV 4.5 Sec 2 Sec 6.5 Sec
PC 0.7 Sec 0.7 Sec 1.4 Sec
HDMI 3.9 Sec 3.9 Sec 7.8 Sec
✎ An example: If the RJP has all its live sources (AV, PC, and HDMI) connected, AV has been assigned the high-
est priority, the RJP is in HDMI mode, and a guest removes and reconnects the AV source, the minimum time
required to switch to the AV source is 6.5 seconds.
• To play audio devices (Ipods, MP3 devices, etc.) through the RJP, you must turn Music Mode AV in the menu on.
(See page 14)
• Music mode in the TA-7610 RJP is supported by the AV jack only. HDMI Music mode is available for the Guestlink
RJP only.
[HC460-ZA]Install-Guide-X0ENG.indd 11 2014-06-05 10:39:07
12
English
Setting the Hotel Option Data
To let you control how the TV functions when in Hotel mode, the TV has two Hotel mode menus, the Stand-alone mode
menu and the Interactive mode menu. The menu items that differ between the menus are listed below.
Menu items in the Stand-alone mode only:
– SI Vendor : Smoovie
– REACH Server and its submenus.
Menu items in the Interactive mode only:
– SI Vendor: Samsung and other vendors.
All other items appear in both menus
To access the menus, press MUTE → 1 → 1 → 9 → ENTER E on your Samsung remote.
After a menu appears, follow these general directions to navigate and change values:
– Use the Up and Down arrow buttons on the Samsung remote to move from menu item to menu item.
– Press the ENTER or Left or Right arrow buttons to select a menu item. The screen displays that menu item only.
– Press the Left or Right arrow button to change a value. The Right arrow button increases numerical values. The Left
arrow button decreases numerical values.
– When the screen is displaying one menu item, you can press the Up or Down arrow button to display the next or
previous menu item.
– Press the RETURN or MENU button to exit the current menu item and go to a higher menu level or the Main menu.
– To exit a Hotel mode menu, turn off the TV, and then turn it on again. Any changes you made are saved except
changes to SI Vendor. For changes to SI Vendor, you must turn the TV off, wait until the Standby light glows steadily,
then unplug the TV, wait for the Standby light to go off, and then plug the TV in again.
Hospitality Mode Standalone System
SI Vendor OFF
Power On
Channel
Menu OSD
Clock
Music Mode
Remote Jack Pack
External Source
Eco Solution
Logo/Message
Cloning
REACH Solution
Security
DRM
Above: The Hotel mode menu
<Depending on model and region, some menu items may not exist.>
To change menus, follow these steps:
1. Highlight the Hospitality Mode menu item in the top left corner of the menu.
2. Press the left or right arrow button on the Samsung remote. Only the Hospitality Mode menu item is displayed.
3. Press the left or right arrow button to change the Hospitality Mode item from Standalone to Interactive or from Interactive
to Standalone.
4. Press the Return or Menu button on the remote. The entire menu re-appears with your selection displayed in the
Hospitality Mode field.
✎ After you have set the values in one TV, you can clone those values to multiple TVs. See USB Cloning on page 19.
[HC460-ZA]Install-Guide-X0ENG.indd 12 2014-06-05 10:39:08
13
English
¦ Menu Items
To Enter this menu: Press the MUTE → 1 → 1 → 9 → ENTERE buttons in order.
To exit from this menu : Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Any
changes you made are saved.
Menu Item initial Value
Description
Hospitality
Mode
Hospitality Mode Standalone
Select Hospitality mode.
•Stand-alone mode : TV works alone.
SI Vendor SI Vendor OFF Stand-alone mode : OFF / Smoovie
Power On
Power On Channel Last Saved
Set the default values that will be applied when the TV is turned on.
•User Defined : Lets you set Power On Channel and Channel Type manually. See
Power On Channel and Channel Type below.
•Last Saved : If you select this item, when the TV is turned on, it displays the
channel it was displaying when it was turned off.
Power On Channel
Num
… When the TV is turned on, it switches automatically to this channel.
Power On Channel
Type
…
•Select channel band : AIR (analog air band), DTV (digital air band), CATV (analog
cable band), CDTV (digital cable band)
Power On Volume Last Saved
•User Defined : Lets you set the Power On Volume manually. See Power On
Volume below.
•Last Saved : When the TV is turned on, it returns to the volume that had been
set when the power had been turned off.
Power On Volume
Num
…
The TV turns on with this Volume Level in Stand Alone Hospitality mode.
Min Volume 0 The minimum Volume Level the user can set in Stand Alone Hospitality mode.
Max Volume 100 The maximum Volume Level the user can set in Stand Alone Hospitality mode.
Power On Source TV Select the input source the TV displays when turns on.
Power On Option Last Option
Determines the TV's state when power returns after a power failure or after you have
unplugged the TV and then plugged it in again.
•LAST OPTION : Returns to its last Power state. If it was in Stand-by, it returns to
Stand-by. If it was on, it turns on.
•Power On : When the power returns, the TV turns on.
•Standby : When the power returns, the TV enters the Standby mode.
Channel
Channel Setup …
Gives you direct, immediate access to some of the Channel menu functions on the
user Channel menu such as Auto Program, Antenna selection, etc.
Channel Editor …
The Channel Editor lets you edit the channels stored in the TV's memory. Using
Channel Editor you can:
•Change the channel numbers and names, and sort the channels in your desired
channel number order.
•Apply the video mute to channels you select. The video mute blanks out the
video from a channel and outputs only the sound while displaying a speaker icon
on the screen. The Channel Editor also lets you view information about each
channel easily, without your having to display each channel directly.
Dynamic SI OFF
•On : Check the DTV Programme channel number. (the DTV channel editor is
inaccessible)
•Off: Do not check the DTV Programme channel number. (the DTV channel editor
is accessible, but additional channel Programme number update is not supported)
Menu OSD
Picture Menu Lock OFF Enable or disable the Picture Menu.
Menu Display ON
•On : The Main Menu is displayed.
•Off : The Main Menu is not displayed.
Panel Button Lock Unlock
Turning the front panel (local key) operations on/off.
•Unlock : Unlocks all panel keys.
•Lock : Locks all panel keys.
•OnlyPower : Locks all panel keys except the Power panel key.
•Menu/Source : Locks the Menu and Source panel keys.
Home Menu Display ON
OFF:The Home Menu is not displayed.
ON:The Home Menu is displayed.
Home Menu Editor Edit Home Menu .
Home Menu Auto
Start
ON
ON:The Home Menu is Auto Start.
OFF:The Home Menu is not Auto Start.
[HC460-ZA]Install-Guide-X0ENG.indd 13 2014-06-05 10:39:08
14
English
Menu Item initial Value
Description
Clock
Local Time Manual
Select the way to update clock data. Use clock data from a DTV channel to set the
clock automatically or set the clock manually when the TV is in stand-alone mode
Tiime Channel Type … Use clock data from which DTV channel to set the clock
Time Channel Num … DTV channel Number
Music
Mode
Music Mode AV OFF
To get music output from an mp3/audio player through an AV Input Source. When
on, you can hear sound from the player through the TV even there is no video signal.
The TV’s backlight, however, remains on. And add a video signal,it works normally.
Music Mode PC OFF
To get music output from an mp3/audio player through a PC Input Source. When on,
you can hear sound from the player through the TV even there is no video signal. The
TV’s backlight, however, remains on. And add a video signal,it works normally.
Music Mode
Backlight
OFF Backlight On/Off option in Music mode to save energy
Remote
Jack Pack
Priority AV 1
If the jack priority is set, the corresponding source is automatically set when a jack is
inserted according to the jack priority
Priority PC 2
If the jack priority is set, the corresponding source is automatically set when a jack is
inserted according to the jack priority.
Priority HDMI 3
If the jack priority is set, the corresponding source is automatically set when a jack is
inserted according to the jack priority.
AV Option AV Select RJP AV Source (Source selection depends on Model).
HDMI Option HDMI /DVI
Select which HDMI source of the TV is connected to the RJP jack. (HDMI1/HDMI2/
HDMI3)
HDMI Music Mode OFF
Allows music output from an mp3/audio player connected to an HDMI Input Source.
When on, you can hear sound from the player through an HDMI input of the RJP
whether there is a video signal or not. (This option is only compatible with the Guest
link RJP.)
External
Source
USB Pop-up Screen Default
When a USB device is connected to the TV :
•Default : A popup window appears.
•Automatic : Opens the USB contents menu automatically.
•Disable : Neither the popup window nor the menu appears.
External Source
Banner
ON
If set to On, the TV displays the External Source Banner (information) when you
change the TV source to another external input, press the Info key, or turn the TV on.
•On : The External Source information is displayed on the TV screen.
•Off : The External Source information is not displayed on the TV screen.
Auto source OFF
•On : When an external input source is connected to the TV, the TV identifies the
input source, and then automatically switches to that input source.
•Off : Auto Source function is Off.
Anynet+Return
Source
Power On
Src
Select the return TV source after stopping an Anynet+(HDMI-CEC) connection. (This
fuction is especially useful for the Guestlink RJP.)
Eco
Solution
Energy saving OFF
Adjusts the brightness of the TV to reduce power consumption.
•Off: Turns off the energy saving function.
•Low: Sets the TV to low energy saving mode.
•Medium: Sets the TV to medium energy saving mode.
•High: Sets the TV to high energy saving mode.
Logo/
Message
Welcome Message OFF Displays a the Welcome Message for 5 seconds when the TV turns On.
Edit Welcome
Message
Edits the Welcome Message.
Hospitality Logo OFF
Turns the Hospitality logo feature On or Off, If On, when the TV is turned on, the Logo
is displayed, before the signal from the initial source, for the amount of time set in
"Logo Display Time".
Hospitality Logo DL …
Downloads the Hospitality logo. Hospitality logo file requirements:
•BMP or AVI files only.
•Max file size : BMP - 960 X 540. AVI - 30MB.
•The file can only be named samsung.bmp or samsung.avi.
Logo Display Time … Hospitality Logo Display Time (3/5/7 seconds).
Cloning
Clone TV to USB - Clone the current TV options to a USB memory device.
Clone USB to TV - Clone the saved TV options on a USB memory device to the TV.
Setting Auto Intialize OFF
When Setting Auto Initialize is set to On, and the power is turned off and on or the
Master Power is turned off and on, the data is restored to the cloned values. If there
is no cloned value, even when the Setting Auto Initialize is set to On, it will be ignored
and the operation will be the same as that whenSetting Auto Initialize is set to Off
[HC460-ZA]Install-Guide-X0ENG.indd 14 2014-06-05 10:39:08
15
English
Menu Item initial Value
Description
REACH
Solution
REACH 3.0 OFF REACH 3.0 On and Off
REACH 2.0 OFF REACH 2.0 On and Off
REACH Channel …
87:Assign a DTV channel number to carry the update REACH data. This channel
number must be the same as the number set on the Reach server.
Group ID …
All:Select the group ID of the REACH server. (Refer to the REACH server manual for
more details)
IPG Room Type …
You can receive up to 3 EPG information headed to the Americas according to
Room Type from SI, and it displays the appropriate channel list and EPG information
according to the value set on TV.For IPG Room Type, there are Default / Public /
Roomtype3 within the hotel Factory Install menu, and its default value is Default.
Ticker OFF
•On : The TICKER content is displayed.
•Off : The TICKER content is not displayed.
REACH Update Time …
Lets you set when data such as updated SW, cloning files, and S-LYNC REACH
contents is downloaded from the REACH server to the TV :
•1hour : Every hour
•2hour : Every 2 hours
•12:00 am : every 12:00 a.m.
•12:00 pm : every 12:00 p.m.
•2:00 pm : every 2:00 p.m.
REACH Update
Immediate
…
•On : Whenever the TV enters standby mode (the power cord is plugged in and
the power is off), the REACH data is updated on the TV.
•Off : The REACH data is only updated on the TV at the REACH server update
time.
REACH
Solution
Room Number … Setting Room Number.
REACH 2.0 TV
Sound
…
OFF:Close REACH 2.0 TV Sound
ON:Open REACH 2.0 TV Sound
REACH 2.0 Server
Version
… 0000:Displays the current REACH data version.
Security
Password Input … Input Password 00000000.
Password Setting … Set new Password.
Password Reset … Reset Password to 00000000.
Security Mode … Security Mode ON or OFF.
USB … USB Disable or Enable.
HDMI … HDMI Disable or Enable.
DRM DRM Mode OFF
Configures CAS support.
OFF : Turns off CAS support.
LYNK DRM : Select to turn on S-LYNK DRM CAS support only.
System
Self Diagnosis for TV …
Enter Self Diagnosis Menu.
•Picture Test: Use to check for picture problems. If the problem appears in the
test picture, select Yes and follow the directions on the screen.
•Sound Test: Use the built-in melody sound to check for sound problems. If
the problem occurs during the test, select Yes and follow the directions on the
screen.
SW Update … SW USB Update function
Service Pattern OFF Same function with SVC Service Pattern
ATV Cable AGC Gain Default
Lets you control the AGC gain of the analog cable channels. Don't change the default
value unless problems occur.
DTV OpenCable AGC
Gain
Default
Lets you control the AGC gain of the digital cable channels. Don't change the default
value unless problems occur.
Contact Samsung … Samsung Contact information
TV reset … Factory reset
✎ REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets
you deliver TV firmware updates, cloning data, channel mapping changes, S-LYNK REACH contents, and TICKER
contents through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are available only
in stand-alone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the
REACH server product for more operating information.
[HC460-ZA]Install-Guide-X0ENG.indd 15 2014-06-05 10:39:08
16
English
¦ Welcome Message
The Welcome Message feature displays a custom message on the TV every time it is turned on.
– Welcome message settings are in the Hotel Option Menu.
– Set Welcome Message to ON to display the message when the TV is powered on.
Welcome Message OFF
Edit Welcome Message
Hospitality Logo OFF
Hospitality Logo DL
...
Logo Display Time
...
– You can make the Welcome Message up to 25 characters long and edit it in the Hotel Service menu.
– Welcome Message supports the following characters:
✎ Capital Letters from A to Z.
– You can edit the Welcome Message by using the remote's navigation, color, and Enter buttons in the “Edit Welcome
Message” OSD (See the illustration below.)
Move Enter Return
a
b
{
}
Move to Left
Move to Right
Leave Black
Done
A B C D E F G
H I J K L M N
O P Q R S T U
V W X Y Z
W E L C O M E T O O U
R H O T E L _
Edit Welcome Message
Below are the general directions for navigating and changing letters on the Edit Welcome Message screen:
– Press the a button on the remote to move to the left in the message.
– Press the
b
button to move to the right.
– After you have selected a position in the message, use the arrow buttons on your remote to select a letter in the
alphabet below the message.
– Press Enter to place a letter into the position you selected.
– Press the
{
button to erase a letter in a position or enter a blank.
– Press Return or the
}
button to exit.
[HC460-ZA]Install-Guide-X0ENG.indd 16 2014-06-05 10:39:08
17
English
¦ Hotel Logo
The Hospitality Logo function displays the Hotel's picture image when the TV is powered on.
– Hospitality Logo settings are the Hotel mode menus.
– The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on.
– If there is a logo image stored in memory and the Hospitality Logo option is on, the Hospitality logo is displayed when
the TV is turned on.
– The Hospitality logo is not displayed when the Hospitality found Logo option is off, even if the logo image has been
loaded into the TV.
Hospitality Mode Standalone System
SI Vendor OFF
Power On
Channel
Menu OSD
Clock
Music Mode
Remote Jack Pack
External Source
Eco Solution
Logo/Message
Cloning
REACH Solution
Security
DRM
r
Welcome Message ON
Edit Welcome Message
MessageHospitality Logo ON
Hospitality Logo DL -
Logo Display Time -
<Depending on model and region, some menu items may not exist.>
y Hospitality Logo
– This option lets you choose whether the Hospitality Logo image is displayed or not.
– Initial value is OFF.
– Can be set to OFF or ON.
– When set to ON, the Logo Download and Logo Time Display menu items become accessible.
y Logo Download
– This option lets you download the logo image to the TV’s memory from a USB device.
– A wait message appears while the image is being copied to the TV.
– A "completed" message appears when the copy operation finishes successfully.
– The word "failed" appears if the copy operation was unsuccessful.
– No USB appears if no USB device is connected.
– No File appears if there is no file to copy on the USB device or the file is in the wrong format (must be a BMP or AVI
file). If No File appears and there is a logo file on the USB device, check the file format.
y Logo File Format
– The TV supports only BMP and AVI format.
– The file name must be samsung.bmp or samsung.avi.
– The maximum resolution of the BMP format is 1280 x 720.
– The maximum file size for AVI format is 30MB.
– The TV does not change the size or scale of the image.
[HC460-ZA]Install-Guide-X0ENG.indd 17 2014-06-05 10:39:08
18
English
¦ USB Cloning
The USB Cloning function lets you download user-configured settings (Picture, Sound, Input, Channel, Setup, and Hotel
Setup) from one TV to a USB device, and then upload these settings from the USB device to other TV sets. This lets you
create a standard array of settings and distribute that standard array to all the TVs in your facility.
• Cloning from TV to USB: Copies stored menu settings from a TV to a USB device.
1. Insert a USB drive into the USB port on the rear of the TV
2. Enter the hotel option menu by pressing these buttons in order. MUTE
→ 1 → 1 → 9 → ENTER E
3. Press the u or d button to select Clone TV to USB, and then press
the ENTERE button.
4. The message Clone TV to USB is displayed. Press the ENTER E
button.
5. The TV displays one of the following messages:
• In Progress: Copying data to USB.
• Completed: Copy operation was successful.
• Failed: Copy operation was not successful.
• No USB: USB is not connected.
The clone folder will be labeled T-NT14LAKUCB.
✎ The cloned values include the values on the Guest side menu
(brightness, picture size, contrast, etc.) and the Hotel side menu.
(5V 0.5A)
/ CLONING
USB
Clone TV to USB
Clone USB to TV
Setting Auto Initialize OFF
• Cloning from USB to TV: Copies menu settings from a USB device to a TV.
✎ Shortcut: Turn the TV off, insert the USB device, turn the TV on, and then press the ENTER E button for 5
seconds.
To clone data to the TV using the Hotel menu, follow these steps:
1. Turn the TV off.
2. Insert the USB drive into the USB port on the rear of the TV.
3. Turn the TV on.
4. Enter the Interactive menu by pressing these buttons in order.
MUTE → 1 → 1 → 9 → ENTER E
5. Press the u or d button to select “Clone USB to TV”, and then press
the ENTER E button.
6. The message Clone: USB to TV is displayed. Press the ENTER E
button.
7. The TV displays one of the following messages:
Clone TV to USB
Clone USB to TV
Setting Auto Initialize OFF
• In Progress: Copying data to TV.
• Completed: Copy operation was successful.
• Failed: Copy operation was not successful.
• No USB: USB is not connected
• No File: There is no file to copy on the USB device. If you get a No File message, check the folder on your
USB device. The folder name should be T-NT14LAKUCB.
✎ Tables that list the settings that are cloned in the Interactive and Standalone Hotel Menus begin on the next
page.
[HC460-ZA]Install-Guide-X0ENG.indd 18 2014-06-05 10:39:09
19
English
• Settings Cloned in the Hotel Menu
Menu Item
Cloning Support Applicable Region
Hospitality Mode
Yes All
SI Vendor
Yes All except Brazil
Power On Channel
Yes All
Power On Channel Num
Yes All
Power On Channel Type
Yes All
Power On Volume
Yes All
Power On Volume Num
Yes All
Min Volume
Yes All
Max Volume
Yes All
Power On Source
Yes All
Power On Option
Yes All
Channel Setup
N/A All except Hospital
Channel Editor
N/A All
Dynamic SI
N/A Smooovie SI and Hospital
Picture Menu Lock
Yes Hospital Models Only
Menu Display
Yes EU
Panel Button Lock
Yes US and US Hospital
Home Menu Display
Yes EU and EU Hospital
Home Menu Editor
Yes EU and EU Hospital
Home Menu Auto Start
N/A Hospital Models Only
Clock Type
Yes EU and EU Hospital
Local Time
N/A EU and EU Hospital
Time Channel Type
Yes All
Time Channel Num
Yes All
Music Mode AV
Yes ALL
Music Mode PC
Yes ALL
Music Mode Backlight
Yes ALL
Priority AV
Yes ALL
Priority PC
Yes ALL
Priority HDMI
Yes ALL
AV Option
Yes EU and EU Hospital
HDMI Option
Yes EU and EU Hospital
HDMI Music Mode
Yes EU and EU Hospital
USB Pop-up Screen
Yes EU
External Source Banner
Yes EU
Auto source
Yes All
Anynet+Return Source
Yes All
Energy saving
Yes All
Welcome Message
Yes All
Edit Welcome Message
Yes All
Hospitality Logo
N/A All
[HC460-ZA]Install-Guide-X0ENG.indd 19 2014-06-05 10:39:09
20
English
Menu Item
Cloning Support Applicable Region
Hospitality Logo DL
Yes All
Logo Display Time
Yes All
Clone TV to USB
Yes All
Clone USB to TV
Yes US and US Hospital
Setting Auto Intialize
Yes All
REACH 3.0
Yes ASIA Models only
REACH 2.0
Yes US and EU
REACH Channel
Yes All
Group ID
Yes All
IPG Room Type
No All Models except Hospital
Ticker
No All except US
REACH Update Time
Yes Hospital Models Only
REACH Update Immediate
Yes Hospital Models Only
Room Number
Yes Hospital Models Only
REACH 2.0 TV Sound
Yes All
REACH 2.0 Server Version
Yes EU
Password Input
Yes All
Password Setting
N/A All
Password Reset
Yes All
Security Mode
N/A All
USB
Yes All
HDMI
N/A All
DRM Mode
N/A All
Self Diagnosis for TV
N/A All except Brazil/ASIA_READY
SW Update
N/A All except Brazil/ASIA_READY
Service Pattern
No US
ATV Cable AGC Gain
Yes All except Brazil/ASIA_READY
DTV OpenCable AGC Gain
No Guestek
Contact Samsung
N/A US and US Hospita
TV reset
N/A ALL
[HC460-ZA]Install-Guide-X0ENG.indd 20 2014-06-05 10:39:09
21
English
¦ Multi Code Remocon
A Multi Code Remocon is a special remote which is designed to control multiple TVs.
This function is useful where there is more than one TV in a location.
You can control up to 10 TVs with a different ID code of each remote with no conflicts between the TVs. ID numbers are
displayed on each TV's OSD.
The Initial ID code for each TV is “0”.
– You can set and reset the ID code in Analog TV mode or PC mode. (Not available in DTV mode.)
– You can set the ID code to any digit from 0 to 9.
– To set a TV's ID code, follow these steps:
1. Aim the remote at the TV, and then press the MUTE button and the RETURN button simultaneously for
more than 7 seconds. When you stop pressing the buttons, the TV displays the current ID in the middle
of the screen and the words, "Remote control code is set to x. If you want to change the Remote control
code, enter the digit you want to change."
2. Press the number on the remote you want to assign to the TV. The TV displays the following words:
"Remote control code is changed to x."
✎ The TV will display the OSD until you press the Exit button.
See the example below.
Remote control code is set to 0. If you want to change
Remote control code, enter the digit you want to
change.
Example: After you see the message above, if you press 1, the TV and Remote will be set to ID code 1. The TV then
displays the following message: “Remote control code is changed to 1”The TV can then only be controlled by a
remote which has the same ID code (1).
The TV can then only be controlled by a remote which has the same ID code (1).
– To reset the ID code, press the MUTE button and the EXIT button simultaneously for more than 7 seconds. When
you stop pressing the buttons, the ID codes of the TV and Remote are reset to “0”. “Remote control code is set to 0.”
appears on the TV.
[HC460-ZA]Install-Guide-X0ENG.indd 21 2014-06-05 10:39:09
22
English
¦ Setting Auto Initialize
When you clone settings from one TV to another, you clone both the guest side menu and hotel side menu settings: Picture,
Sound, Input, Channel, Setup, and Hotel Setup. This lets you set nearly all of the menu values on your hospitality TVs to
the same, standard settings. If you allow guests access to the guest side menus, for example the Picture menu, they can
change the settings in those menus so they are no longer standard. If you set the Setting Auto Initialize function to on the TV
automatically restores (initializes) any guest-side menu values to the cloned, standard values when the TV is turned off and
then turned on again. Note that Setting Auto Initialize works on cloned guest side menu values only. Settings which have not
been cloned are ignored.
The table below lists the settings that are restored to their cloned values when you set the Setting Auto Initialize function to
on.
Menu Menu Item
Picture Menu
Picture Mode
Backlight
Contrast
Brightness
Sharpness
Color
Tint (G/R)
Picture Size
Picture Size
Position
PIP
Advanced Settings
Dynamic Contrast
Black Tone
Flesh Tone
RGB Only Mode
Color Space
White Balance
Gamma
Motion Lighting
Picture Option
Color Tone
Digital Clean View
MPEG Noise Filter
HDMI Black Level
Film Mode
Picture Off
Reset Picture
Menu Menu Item
Sound Menu
Sound Mode
Sound Effect
DTS TruSurround
DTS TruDialog
Equalizer
Speaker Settings
Speaker Select
Auto Volume
Reset Sound
System Menu
System
Menu Language
Time
Clock
Sleep Timer
Wake-up Timer
Eco Solution
Energy Saving
Eco Sensor
No Signal Power Off
Auto Power Off
Auto Protection Time
Change PIN
General
Game Mode
Boot Logo
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)
Auto Turn Off
DivX® Video On Demand
[HC460-ZA]Install-Guide-X0ENG.indd 22 2014-06-05 10:39:09
23
English
¦ Hotel Plug & Play
The Hotel Plug & Play function, which automatically performs the Hotel mode selection, Country Setup, Clock Setup, and
Picture mode Setup, runs once when power is first turned ON. Setup also runs automatically after you have executed a
Service Reset.
Auto Program
Auto Program is incomplete.
0 channels are memorized
Change Settings Scan Again
DTV Air0
Air
DTV Cable
Cable
0
0
0
Self Diagnosis for TV
SW Update
Service Pattern
ATV cable AGC Gain
OFF
DTV OpenCable AGC Gain
Contact Samsung
Default
Default
TV Reset
If you select
Change
If you select
Standalone Only
TV will enter the RF mode.
If you don’t change the country of the Current Location
If you select Skip
If you select
Standalone Setup
Select your language
Press Power OFF to exit.
Select Picture mode
Select Clock Mode, DST, and your Time Zone
Select the channel
band to use for
Auto
Program
After Searching
channels.
If you select Factory Reset, the TV resets all values to their factory
defaults and then displays the Hotel Plug & Play menu. Go to the
first Hotel Plug & Play screen below.
The TV is automatically
turned off and on.
If you change the country
of the Current Location
Local Set
Change Locat Set if Located in North America, Latin America and Europe.
In other regions, Please press SKIP button move to the next step.
Current Localset : US
Change Skip
Local Set
Change Locat Set if Located in North America, Latin America and Europe.
In other regions, please press SKIP button move to the next step.
Current Localset : US
Change Skip
Easy Set up
Standalone Setup
(Continue Setup)
Standalone Only
(End Setup)
If you Select this, Easy
setup will be started.
There are Essential
Details, Channel Scan,
Clock and Terms in Easy
setup.
c
Next
Select your Language
Select your language to start the on screen setup.
The Language Setting will be applied to Main Menu and not Plug and Play.
Press the ▲▼◄►
buttons to move the
highlight.
Press the enter button to
select.
English
Español
Français
c
Configure your TV
Picture Mode Standard
Choose a picture mode
that best suits your
viewing enviroment.
Select your information in all of the categories
below.
TV Setup Complete!
Your TV is now ready to use
OK
Auto Program
Antenna Both
Digital Cable System STD
Analog Cable System STD
Select current connected
antenna.
To get channels, set the options below then select
Scan.
Scan
Auto Program
Auto Program is channels for you...
Air 21
6%
Stop
DTV Air0
Air
DTV Cable
Cable
0
0
0
Clock
-- : -- --
You can adjust your time to set DST, Time Zone and
clock mode
Set current date and time
Clock Mode Auto
Date
-- / -- / ----
Time
-- : -- --
DST Off
Time Zone Eastern
Local Set
Warning! TV might not function if Local Set is not correctly configured.
When Local Set is changed, TV will turn off automatically to apply it.
US
Countries List
USA
Standalone
Hospitality Option Menu
appears.
[HC460-ZA]Install-Guide-X0ENG.indd 23 2014-06-05 10:39:10
24
English
y Hotel Plug & Play OSD
– Initially highlighted: Standalone Setup
– If you select the Standalone Only button, Standalone mode is set by default and the “Standalone mode has been set”
OSD appears for 3 seconds.
– TV enters into RF mode automatically after displaying the “Standalone mode has been set” OSD for 3 seconds.
– If you select Standalone Setup mode, the “Select your Language” OSD appears.
y LocalSet
– Initially highlighted: US
– If you press the Enter key after selecting Change, you can change the country.
– If the country is changed, the TV automatically turns off and on.
– If you select the incorrect country, execute TV Reset again after entering the Service section of the Hotel Menu.
y Select Menu Language OSD
– If you select Standalone from the “Standalone Setup TV Mode” OSD, the “Select your Language” OSD appears.
– Initially highlighted: English
– If you press the Enter key, the “Picture Mode” OSD appears
y Picture Mode OSD
– Initially highlighted: Standard.
– The TV displays the Picture Mode OSD where you can choose Dynamic or Standard Picture mode.
y Auto Program OSD
– If you press the Enter key, the TV automatically searches for channels.
y Set Clock Mode, DST(Daylight saving time), and Time Zone OSD
– Initially highlighted: Clock Mode : Auto, DST : Off, Time Zone : Eastern
– If the TV will be tuned to digital broadcast channels, and these channels transmit date and time information, set the
Clock Mode to Auto. The TV will set the date and time automatically.
– If the TV will not be tuned to digital broadcast channels, set the Clock Mode to Manual, and then set the date and
time on the TV manually.
– Set DST On or Off to apply or not apply daylight saving time to the TV.
– Select your time zone on the map appears.
[HC460-ZA]Install-Guide-X0ENG.indd 24 2014-06-05 10:39:10
25
English
¦ USB Software Upgrade Method
Samsung may offer upgrades to the TV’s SW in the future. Please contact the Samsung Hospitality Hot line at 1-866-8940524 to receive information about downloading upgrades and using a USB drive to update the SW by connecting the USB
drive containing the upgrade to the USB port located on the TV.
When the software is upgraded, video and audio settings you have made will return to their default (factory) settings. We
recommend you clone the hotel settings so that you can easily reset them after the upgrade.
To upgrade the TV's software, follow these steps:
1. Insert a USB drive containing the SW upgrade into the USB port on the side of the
T V.
2. Press the MENU button to display the menu.
Press the u or d button to select Support, and then press the ENTER E button.
3. Press the u or d button to select SW Upgrade, and then press the ENTER E
button. The message "Scanning for USB. This may take more than 1min." is
displayed.
4. The message "Upgrade version XXXX to version XXXX? The system will be reset
after upgrade." is displayed.
Press the l or r to select the OK, and then press the ENTER E button.
(5V 0.5A)
/ CLONING
USB
Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will
turn off and turn on automatically after completing the SW upgrade. Please check the SW version after the upgrades are
complete.
[HC460-ZA]Install-Guide-X0ENG.indd 25 2014-06-05 10:39:10
26
English
¦ Channel Bank Editor (Smoovie TV Only)
The Channel Bank Editor in conjunction with the SMOOVIE remote lets you control the channels guests have access to.
The Channel Bank Editor provides three Banks of channels and lets you select which channels will be available from each
bank. SMOOVIE remotes have instalable Bank Cards which correspond to the channel banks in the Channel Bank Editor.
The remotes only allow access to channels in the channel bank that correspond to the installed card. Consequently, the
channels a guest can access depend on the Bank Card installed in their SMOOVIE remote.
Setting the Channel Bank Editor under Stand-alone Mode
1. Press MUTE + 1 + 1 + 9 + ENTER E on the remote to enter the Hotel Standalone menu.
2. Go to SI vendor, and then select : “Smoovie”
3. Find the new menu option, “Channel Bank Editor”.
4. Enter the “Channel Bank Editor”.
Hospitality Mode
Standalone
SIRCH
SI Vendor
OFF Service
d
SI Vendor
Smoovie
d
SI Vendor
Smoovie
d
SI Vendor
Smoovie
<Depending on model and region, some menu items may not exist.>
5. Edit the Channel Bank. An example is below.
a. Bank1 (Free channel): Select the channels that will be accessible when a remote doesn’t have a card.
b. Bank2 (Family Card - Green): Select the channels that will be accessible when a remote has a GREEN CARD.
c. Bank3 (Adult Card - Red): Select the channels that will be accessible when a remote has a RED CARD.
Information About SMOOVIE Remote Controls
Channel Bank Editor
Move Select/Deselect Return
All
1 ABC
2 CBS
3 FOX
4 NBC
5 CNN
6 CW
7 HBO
8 TNT
Bank1 (4) Bank2 (6)Bank3 (36)
• If you select SMOOVIE as the SI vendor, you should also use SMOOVIE remotes in your facility.
• Guests with remotes that do not have a card can only view channels from Bank 1.
• Guests using the Numeric keys on the remote to change channels can only view channels from Bank 1.
• Guests with remotes that have Green or Red cards must use the channel up/down keys to change channels.
• Guests can only see channels from the Bank1 channel list In the Channel Guide or the Channel List.
[HC460-ZA]Install-Guide-X0ENG.indd 26 2014-06-05 10:39:11
27
English
Smoovie Set Up Sequence
Step
Smoovie TV Setup (Air/ Cable )
Only Air or Cable used
Only Air or Cable used
If the TV starts with Hotel Plug&Play If Hotel Plug&Play already done
1 Do a complete P&P (including Air or Cable auto tune) Enter the Hotel menu
2 After P&P, the TV displays the Hotel menu
Select the channel type
- ATV or ADTV for Air
- CATV or CDTV for cable
3
Select the channel type
- ATV or ADTV for Air
- CATV or CDTV for cable
Select Smoovie TV in the Hotel menu
4 Select Smoovie TV in the Hotel menu Select Channel Setup
5
Select Channel Setup
(Can be skipped)
Select "Air" or "Cable" to auto tune
6 Select "Air" or "Cable" to auto tune. (Can be skipped,)
Set up channels in the CH Bank Editor
7 Set up channels in the CH Bank Editor
After power off & on, guests can use the TV
8 After power off & on, guests can use the TV
9
10
¦ Channel Editor
The Channel Editor lets you edit the channels stored in the TV's memory. Using Channel Editor you can:
– Change the channel numbers and names, and sort the channels in your desired channel number order.
– Apply the video mute to channels you select. The video mute blanks out the video from a channel and outputs only the
sound while displaying a speaker icon on the screen.
– The Channel Editor also lets you view information about each channel easily, without your having to display each channel
directly.
Hospitality Mode Standalone System
SI Vendor OFF
Power On
Channel
Menu OSD
Clock
Music Mode
Remote Jack Pack
External Source
Eco Solution
Logo/Message
Cloning
REACH Solution
Security
DRM
r
Channel Editor
<Depending on model and region, some menu items may not exist.>
General Steps for Using the Channel Editor in Stand-alone Mode
Step Broad Outline
1 Run ‘Channel Auto Store’ in the Hotel Option Menu.
2 Enter ‘Channel Editor’ in the Hotel Option Menu.
3 On a piece of paper, compile a list of channels you want to have, arranged in the order you want.
4 Rearrange channels and edit channel names with the TOOLS Button based on the list you compiled.
5 Press the EXIT or RETURN Button to exit.
<For a detailed explanation of how Channel Editor works, see pages 34 through 36.>
The picture below shows a sample Channel Editor screen.
[HC460-ZA]Install-Guide-X0ENG.indd 27 2014-06-05 10:39:11
28
English
• a Indicates an analog channel.
• Channels without an a are digital channels.
✎ If Dynamic SI in the Hospitality Option Menu is On, Channel Editor will display no digital channels. You must set
Dynamic SI to Off before you can edit digital channels in Channel Editor.
• The guide at the bottom of the Channel Editor menu displays the remote buttons you need to press to apply Channel
Editor functions.
1 Using the remote's up or down arrow key, highlight the channel that you want to edit.
– To edit more than one channel, move the highlight to a channel, and then press the ENTER E key. A check will
appear in the check box next to the channel. Repeat for each channel you want to edit.
2 To delete the channel or channels you selected from the channel list, press the red button on the remote.
– To delete two or more channels simultaneously, select multiple channels in Step 1, and then press the red button
on the remote.
3 Press the green button on the remote to select all channels.
4 To apply the video mute, press the yellow button on the remote.
– To apply the video mute to two or more channels simultaneously, select multiple channels in Step 1, and then
press the yellow button on the remote.
5 To view information about a channel, including video mute set up, press the INFO button on the remote.
6 Press the TOOLS button on the remote to rename a channel or change the channel number. See page 36.
Channel Editor Functions and Remote Button
a Red (Delete): Deletes a channel from the channel list.
b Green (Select All): Selects all channels at once.
{ Yellow (Deselect All): Deselects all channels at once.
} Blue (Video Mute On/Off): You can set the Video Mute On/Off.
U (Page): Moves to next or previous page.
` (Information): Display details of the selected channel.
T (Tools): Displays the option menu.
R (Return): Returns to the previous step or exits.
[HC460-ZA]Install-Guide-X0ENG.indd 28 2014-06-05 10:39:11
29
English
When you press the TOOLS button, the following menu is available.
• Edit Channel Number
Use Edit Channel Number to change the channel number of a channel
you select.
To change a channel number, follow these steps:
1. Select a channel on the Channel Edit screen.
2. Press the TOOLS button on your remote.
3. Select Edit Channel Number in the Tools menu.
4. Use the up or down arrow keys to change the channel number.
5. Select OK when done, and then press the ENTER E button.
✎ When you change the channel number, the channel information is
not updated automatically.
Edit Channel Number
ABC HD_
U
AdjustE SpaceR Return
Ok
Cancel
4
• Rename Channel
Use Rename Channel to change the name of a channel you select.
To change the name of a channel, follow these steps:
1. Select a channel on the Channel Edit screen.
2. Press the TOOLS button on your remote.
3. Select Rename Channel in the Tools menu.
4. Use the on-screen keyboard that appears to enter the new name
for the channel. Use the arrow buttons on your remote to select
a letter or number, and then press Enter. Repeat for each letter or
number you want to select.
5. When finished, select Done on the bottom of the screen, and then
press the ENTER E button.
Edit Channel Number
ABC HD_
U
AdjustE SpaceR Return
Ok
Cancel
4
Rename Channel
Enter new name for CH 4 (Max Length = 24)
ABC HD_
a
Delete{ SpaceR Return
Done Cancel
a b c d ef123
g h i j k l 456
m nopq r 789
s t u v w x yz0
A/a
Space ◄ ►
• Information
Use Information to view information about a channel you select.
To view information about a channel, follow these steps:
1. Select a channel on the Channel Edit screen.
2. Press the TOOLS button on your remote.
3. Select Information in the Tools menu.
4. Select OK, and then press the ENTER E button to close the
Information screen.
Edit Channel Number
ABC HD_
U
AdjustE SpaceR Return
Ok
Cancel
4
Rename Channel
Enter new name for CH 4 (Max Length = 24)
ABC HD_
a
Delete{ SpaceR Return
Done Cancel
a b c d ef123
g h i j k l 456
m nopq r 789
s t u v w x yz0
A/a
Space ◄ ►
[HC460-ZA]Install-Guide-X0ENG.indd 29 2014-06-05 10:39:12
30
English
The external sources of this TV are displayed in the last page of the Channel Editor menu as shown in the example below.
In the example, there are two external sources connected to the TV, HDMI2 (DVI) and AV.
– You can assign a new analog channel to an external source by selecting the source on the last page, pressing the
TOOLS button, selecting Edit Channel Number, and then using the up or down arrow button on the remote to select
the channel number of the analog channel.
– If you tune to a channel after assigning the channel to an external source, you can enter the external source without
opening the TV source menu.
Channel
b
Select AllU PageE SelectT ToolsR Return
a 628MLS Soccer a 629 CNN NEWS
a 812American Idol a 840 90210
a 841LOST a 998Euro Football
a
HDMI1
a
HDMI2/DVI
a
HDMI3
a
AV
All
Channel
a
Delete
b
Select AllU PageE SelectT ToolsR Return
a 628 MLS Soccer a 629 CNN NEWS
a 812 American Idol a 840 90210
a 841 LOST a 997AV
a
Euro Football
a
HDMI1
a
HDMI2/DVI
a
HDMI3
All
HDMI3AllAfter assigning channel
number 997 to the AV source.
[HC460-ZA]Install-Guide-X0ENG.indd 30 2014-06-05 10:39:12
31
English
Installing the Wall Mount
[
Wall or Ceiling Mounting
I
f you mount this product on a wall, it should be mounted only as recommended by the manufacturer. Unless it is correctly
mounted, the product may slide or fall, causing serious injury to a child or adult, and serious damage to the product.
Installing the Wall Mount Kit
The wall mount kit (sold separately) lets you mount the TV on the wall. For detailed information about installing the wall
mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount
bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to
install the wall mount on your own.
To order the wall mount, contact Samsung Customer Care at 1-800-SAMSUNG (1-800-726-7864).
Wall Mount Kit Specifications (VESA)
✎ The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. When attaching to building materials other than plaster
board, please contact your nearest dealer. If you install the wall mount on a ceiling or slanted wall, TV may fall and cause
severe personal injury.
✎ NOTE
• Standard dimensions for wall mount kits are shown in the table below.
• Samsung wall mount kits contain a detailed installation manual. All parts necessary for assembly are provided.
• Do not use screws that do not comply with the VESA standard screw specifications.
• Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the TV set.
• For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may
differ depending on the wall mount specifications.
• Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to
personal injury. Samsung is not liable for these kinds of accidents.
• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is
used or the consumer fails to follow the product installation instructions.
• Do not mount the TV at more than a 15 degree tilt.
• Always have two people mount the TV onto a wall.
Product
Family
TV
size in
inches
VESA screw hole specs
(A * B) in millimeters
Standard Screw
(Length* Pitch in mm)
Quantity
LED-TV
40 200 X 200
M8 4
48 200 x 200
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric
shock.
[HC460-ZA]Install-Guide-X0ENG.indd 31 2014-06-05 10:39:12
32
English
Securing the TV to the Wall
[
Caution
Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children
do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries
or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install
the anti-fall device for safety purposes, as follows.
To Avoid the TV from Falling
1. Put the screws into the clamps and firmly fasten them onto the wall.
Confirm that the screws have been firmly installed onto the wall.
✎ You may need additional material such as an anchor depending on
the type of wall.
✎ Since the necessary clamps, screws, and string are not supplied,
please purchase these additionally.
2. Remove the screws from the back center of the TV, put the screws into
the clamps, and then fasten the screws onto the TV again.
✎ Screws may not be supplied with the product. In this case, please
purchase the screws.
3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall
with a strong string and then tie the string tightly.
✎ NOTE
• Install the TV near to the wall so that it does not fall backwards.
• It is safe to connect the string so that the clamps fixed on the
wall are equal to or lower than the clamps fixed on the TV.
• Untie the string before moving the TV.
4. Verify all connections are properly secured. Periodically check
connections for any sign of fatigue for failure. If you have any doubt about
the security of your connections, contact a professional installer.
Wall
[HC460-ZA]Install-Guide-X0ENG.indd 32 2014-06-05 10:39:12
33
English
Anti-theft Kensington Lock
The Kensington Lock is a device you can use to physically fix a TV
to a location when you use it in a public place. The appearance and
locking method may differ from the illustration at right, depending on the
manufacturer. Refer to the manual provided with the Kensington Lock for
additional information on proper use.
The Kensington Lock is not supplied by Samsung.
✎ Please find a “K” icon on the rear of the TV. A Kensington slot is
beside the “K” icon.
1
<Optional>
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object such as desk or chair.
2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product 1.
4. Lock the lock.
✎ These are general instructions. For exact instructions, see the User manual supplied with the locking device.
✎ The locking device has to be purchased separately.
✎ The location of the Kensington slot may be different depending on the TV model.
[HC460-ZA]Install-Guide-X0ENG.indd 33 2014-06-05 10:39:13
34
English
Specifications
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
50°F to 104°F(10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F(-20°C to 45°C)
5% to 95%, non-condensing
Model Name HG40NC460 HG48NC460
Display Resolution 1366 x 768
Screen Size
(Diagonal)
40" Class
(40.0" measured diagonally)
48" Class
(47.6" measured diagonally)
Sound (Output) 10 W x 2
Dimensions (WxHxD)
Body
With stand
36 x 21.6 x 3.6 inches
(914.2 x 547.9 x 90.9 mm)
36 x 23.1 x 7.7 inches
(914.2 x 586.4 x 196.4 mm)
42.6 x 25.1 x 3.6 inches
(1083.2 × 637.8 × 90.9 mm)
42.6 x 26.7 x 8.0 inches
(1083.2 × 677.0 × 203.9 mm)
Weight
Without Stand
With Stand
15.4 lbs (7.0 kg)
16.8 lbs (7.6 kg)
20.1 lbs (9.1 kg)
21.8 lbs (9.9 kg)
✎ Design and specifications are subject to change without prior notice.
✎ This device is a Class B digital apparatus.
[HC460-ZA]Install-Guide-X0ENG.indd 34 2014-06-05 10:39:13
35
English
Dimensions
HC460
• Front view / Side view
1
2
4
3 5
7
6
(Unit: inches)
1 2 3 4 5 6 7
HG40NC460 36 35 19.7 21.6 23.1 7.7 3.6
HG48NC460 42.6 41.6 23.4 25.1 26.7 8.0 3.6
• Jack panel detail / Rear view
1
4
3
2
5
6
(Unit: inches)
1 2 3 4 5 6
HG40NC460 7.9 7.9 22.9 7.9 6.3 10.7
HG48NC460 7.9 7.9 26.3 11.2 8.2 12.6
[HC460-ZA]Install-Guide-X0ENG.indd 35 2014-06-05 10:39:13
36
English
• Base Stand detail
HG40NC460
(Unit: inches)
7.7
6
15.1
8
6
18.5
HG48NC460
(Unit: inches)
8
6
18.5
[HC460-ZA]Install-Guide-X0ENG.indd 36 2014-06-05 10:39:13
37
English
✎ NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer
to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors.
© 2014 Samsung Electronics America, Inc
¦ Important Warranty Information Regarding Television Format Viewing
✎ See the warranty card for more information on warranty terms.
Wide screen format LED Displays (with aspect ratios of 16:9, the ratio of the screen width to height) are primarily designed to display wide
screen format full-motion video. The images displayed on them should primarily be in the wide screen, 16:9 ratio format, or expanded to fill
the screen if your model offers this feature, and the images are constantly moving. Displaying stationary graphics and images on screen, such
as the dark sidebars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total
television viewing per week.
Additionally, viewing other stationary images and text such as stock market crawls, video game displays, station logos, web sites or computer
graphics
and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can
cause uneven aging of LED displays that leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the
programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer
picture sizing features, use these controls to view different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven LED aging as a result of format selection and use, as
well as burnedin images, are not covered by your Samsung limited warranty.
• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics
(SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide
Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products
purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the
Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation
to and from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in
material or workmanship, and only those encountered in normal use of the product.
Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times,
exchanges or replacements, accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free:
– In the Unit
ed States : 1-866-894-0524
– In Canada : 1-800-213-8513
Disconnecting Device Instructions
Worded: "To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be
readily operable" or equivalent.
Outdoor Use Marking - UL
Worded: "WARNING - To Prevent damage which may result in fire or elctric shock hazard, do not expose this appliance to rain or moisture" or
equivalent.
Wet Location Marking - c-UL
Worded: "Apparatus shall not be exposed to dripping or splashing" and "Do not place a vessel containing water on this apparatus as this can
result in a risk of fire or electric shock" or equivalent.
[HC460-ZA]Install-Guide-X0ENG.indd 37 2014-06-05 10:39:13
This page is intentionally
left blank.
[HC460-ZA]Install-Guide-X0ENG.indd 38 2014-06-05 10:39:13
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care
center.
Country Customer Care
Center
Web Site Address
CANADA 1-800-SAMSUNG
(726-7864)
www.samsung.com/ca/support (English)
www.samsung.com/ca_fr/support (French)
Samsung Electronics Canada Inc. 2050 Derry
Road West, Mississauga, Ontario L5N 0B9
Canada
U.S.A 1-800-SAMSUNG
(726-7864)
www.samsung.com/us/support Samsung Electronics America, Inc. 85 Challenger
Road Ridgefield Park, NJ 07660
[HC460-ZA]Install-Guide-X0ENG.indd 39 2014-06-05 10:39:13
Loading...