Samsung GT-S7262 Repair Guide

Level

7.

Disassembly

7-1.

1

Repair

2

Temperature :

2

50± 5 ˚C

1) Unscrew the 1 points of the REAR.

2) Remove the LCD cap

3

AIR pressure

5~7 kgf/cm

1) Disassemble the LCD connector

2) Detach the TSP/LCD Assay using Vaccum Jig

1) Displace the temperature chamber for 10
minute

4

1) Unscrew the 4 points of the REAR.

7-1

Confidential and proprietary-the contents in this service guide subject to change without prior notice.

Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.

Level2Repair

5

6

1) Remove the Top and Bottom Dummy 1) Detach the PBA from Rear using rear hooker

7-2

Confidential and proprietary-the contents in this service guide subject to change without prior notice.

Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.