Samsung GT-S5620, SGH-S5620 Disassembly & Reassembly
Disassembly and Assembly Instructions
11.
11-1.
1
Disassembly
Unscrew the6points.
1)
2
Seperate the REAR CASE.
1)
Hook11Points
Be careful to damage the SMD material.
Don't use DISASSEMBLE JIG deeply.
Caution
※
Be care of scratch and molding damage.
1)
3
Separate the motor from bracket.
1)
Widen the space between PBA and Front
2)
Ass'y.
After separating the LCD and Sub key
3)
connector from PBA, disassemble PBA from
Front Ass'y.
Caution
※
Be care of scratch and molding damage.
1)
Separate the Camera module from PBA.
1)
4
After separating the
2)
connector, disassemble the2hooks both
side of
Phi module.
3.5
Phi module
3.5
Caution
※
Be care of PBA and molding damage
1)
Be care of motor wire and each kind of
2)
FPCB damage.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
.
Caution
※
Be care of PBA and each module damage
1)
11-1
.
Disassembly and Assembly Instructions
5 6
Unlock the TSP and CIF Camera connector.
1)
Remove conductive tape asabelow picture.
2)
Separate the bracket from Front ass'y.
3)
Separate the CIF Camera form Front ass'y.
4)
Separate LCD, Sub Keypad and Sub Key
1)
Dome sheet from the Front Case.
Hook2Points
Caution
※
Be care of scratch and molding damage.
1)
Be care of each kind of FPCB damage.
2)
7
※
Be care of FPCB damage.
1)
Be care of TSP crack.
2)
Separate the TSP window form Front Case.
1)
Caution
Caution
※
Be care of scratch and molding damage.
1)
Be care of damage to the LCD.
2)
Caution
※
11-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Loading...