Samsung gt-p7510 Service Manual

GSM TELEPHONE
GT-P7510
GSM TELEPHONE
CONTENTS
Safety Precautions
1. Specification
2. Product Function
3. Exploded View and Parts list
4. MAIN Electrical Parts List
5. Level1Repair
6. Level2Repair
7. Level3Repair_Rev
8. Reference data
9.
Notice: All functionality, features, specifications, and other product information provided in this document, including but not limited to, benefits, design, pricing, components, performance, availability, and capabiliti
es of the product are subject to change without
­notice. Samsung reserves the right to alter this doc
ument or the product described herein at anytime,
­without obligation to provide notification of such changes.
1.3 / 11.05.13
This Service Manual isaproperty of Samsung Electronics Co.,Ltd. Any unauthorized use of Manual can be punished under applicable International and/or domestic law.
Samsung Electronics Co.,Ltd.
2011. 05.
Rev.1.0
7.
7-1.
Level
Repair
2
Disassembly and assembly Instructions
7-1-1.
1
Disassembly
Disengage the rear cover with the front
Carefully release the screws at2different locations
Torque
(
1.1 ± 0.1
Be careful not to scratch cover. Follow the numbered sequence when you disjoint
kgf.cm)(Size:1.4*2.0)
2
cover by using the hook
4
2
3
1
3
Separate the30PIN I/F connector, TSP connector, LCD connector from the PBA.
30 PIN I/F
Be careful not to damage the FPCBs Be careful not to damage the FPCBs
TSP
LCD
4
Release the screw at2points(Size:)(Torque:
1.1±0.1
kgf.cm)
blue:L2.5 (2Point)
7-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Level2Repair
Open the black thin bar and Separate the
5
LCD FPCB from the Front.
6
Carefully release the screws at13different locations from the Front.
Torque
(
1.1 ± 0.1
kgf.cm)
blue:L2.5 (10Point)
red:L2 (3Point)
Be careful not to damage the FPCBs Be careful not to scratch cover
7
Separate the Battery from PBA
Be careful not to damage the wires Be careful not to damage the FPCBs
8
Separate all connector(E/J,2M, Sensor) ribbons from the PBA.
3M
Camera,
7-2
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Level2Repair
Separate the SPK Module, GPS CABLE,
9
SIDE KEY from the PBA
GPS CABLE
SIDE KEY
Separate the PBA from Ass'y
10
SPK Module(left)
SPK Module(right)
Be careful not to damage the FPCBs Be careful not to scratch cover
7-3
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Level2Repair
7-1-2.
1
assemble
Insert the PBA in the hook
2
Attach the SPK Module, GPS CABLE,
SIDE KEY
GPS CABLE
SPK Module(left)
SIDE KEY
SPK Module(right)
Be careful not to scratch cover Be careful not to damage the FPCBs
3
Attach the E/J,2M,
Be careful not to damage the FPCBs Be careful not to damage the wires
Camera, Sensor.
3M
4
Attach the battery
7-4
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Level2Repair
screws at13points
6
Put the LCD FPCB and Close the black
5
thin bar
Be careful not to scratch cover
screw:1.4*2.0,
7
screws at2Points
blue:L2.5 (10Point)
red:L2 (3Point)
1.4*2.5 (
Torque
1.1 ± 0.1, '+'
blue:L2.5
type)
Be careful not to damage the FPCBs
Insert the30PIN I/F, TSP, LCD Connector
8
and Close the black thin bar
30 PIN I/F
TSP
LCD
Be careful not to damage the FPCBs Be careful not to damage the FPCBs
7-5
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Joint the Rear and the Front.
9
Level2Repair
Screws at2points
10
Attach screw sheet
1
2
Follow the order
3
Torque
(
1.1 ± 0.1, '+'
Be careful not to scratch rear cover
type)(Size:
1.4*2.0)
7-6
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Exploded View and Parts List
4.
Cellular phone Exploded View
4-1.
4-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Cellular phone Parts list
4-2.
Exploded View and Parts List
QCR47 QCR72
QCR104
QCB01 QBA01
QJK01 QME16 QVK05 QME02 QVK01 QSP01 QSP02 QME03
QMI03 QMP01 QCA01 QCA02
ㅤ ㅤ ㅤ ㅤ ㅤ ㅤ ㅤ ㅤ ㅤ ㅤ ㅤ ㅤ ㅤ ㅤ ㅤ ㅤ ㅤ
SCREW-MACHINE SCREW-MACHINE SCREW-MACHINE
CBF COAXIAL CABLE-30MM(GT-P7500) GH39-01485A
INNER BATTERY OPTION GH43-03562A
ASSY ETC-EARJACK FPCB(GT-P7500) GH59-11203A
ASSY ETC-CON TO CON FPCB(GT-P7500) GH59-11210A
KEY FPCB-FLASH LED FPCB(GT-P7500) GH59-11211A
ASSY ETC-SUB PCB(30PIN FPCB+MIC FPCB) GH59-11213A
KEY FPCB-POWER+VOL KEY ASSY(GT-P7500) GH59-11217A
MODULE-SPEAKER+MOT(LEFT) GH59-11219A
MODULE-SPEAKER+INT(RIGHT) GH59-11220A
TOUCH/PANEL-GT-P7500, LOGO_X(ITO FILM) GH59-11647A
RMO RUBBER-MIC HOLDER GH73-15090A
A/S ASSY-PBA MAIN(XAB)GT-P7510,64G,SVC GH82-06011A
ASSY CAMERA-MODULE GT-P7500,1/5"(3M) GH96-05184A ASSY CAMERA-MODULE GT-P7500,1/5"(2M) GH96-05185A
6001-001695 6001-002051 6001-002686
QFR01 QSC01 QRE01
ㅤ ㅤ
ㅤ ㅤ ㅤ
QVO01 PMO KEY-VOLUME GH72-64107B QCK02 PMO KEY-POWER GH72-64108B
MEA FRONT-LCD ASSY(P4),GT-P7510 GH97-12600A
ASSY COVER-SCREW CAP GH98-20396B
ASSY CASE-REAR(NORTH AMER_GRAY) GH98-20667C
4-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung
written authorization is?strictly prohibited.
s
Specification
2.
2-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Operation Instruction and Installation
3.
Main Function
Android OS: Honeycomb
• MP AF with LED Flash
•3
•11.1
-1
-
-
WSVGA TFT Full Touch(C-Type) A-GPS/BT v2.1 USB v2.0/WiFi Recording Sensors: Accelation, Magnetic, Gyro, Light Additional
GHz Dual Core CPU Application store/Voice&Motion UI Multi-touch, Multi-task manager
1080p /
:
Playback
(802.11
1080p
a/b/g/n)
3-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Reference Abbreviate
9.
Reference Abbreviate
Advanced Audio Coding.
AAC:
AVC :
BER :
BPSK:
CA :
CDM :
C/I :
DMB :
EN
ES
ETSI:
MPEG:
PN :
PS :
QPSK:
RS :
SI :
TDM :
TS
Advanced Video Coding. Bit Error Rate
Binary Phase Shift Keying
Conditional Access
Code Division Multiplexing
Carrier to Interference
Digital Multimedia Broadcasting
European Standard
:
Elementary Stream
:
European Telecommunications Standards Institute
Moving Picture Experts Group Pseudo-random Noise Pilot Symbol
Quadrature Phase Shift Keying
Reed-Solomon
Service Information
Time Division Multiplexing
Transport Stream
:
9-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Safety Precautions
1.
Repair Precaution
1-1.
Before attempting any repair or detailed tuning, shield the device from RF noise or static electricity discharges.
Use only demagnetized tools that are specifically designed for small electronic repairs, as most electronic parts are sensitive to electromagnetic forces.
Use only high quality screwdrivers when servicing products. Low quality screwdrivers can easily damage the heads of screws.
Use only conductor wire of the properly gauge and insulation for low resistance, because of the low margin of error of most testing equipment. We recommend
Hand-soldering is not recommended, because printed circuit boards(PCBs) can be easily
gauge twisted copper wire.
22-
damaged, even with relatively low heat. Never useasoldering iron withapower rating of more than 100 watts and use only lead-free solder with a melting point below 250°C (482°F).
Prior to disassembling the battery charger for repair, ensure that the AC power is disconnected.
Always use the replacement parts that are registered in the SEC system. Third-party replac ement parts may not function properly.
1-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Safety Precautions
ESD(Electrostatically Sensitive Devices) Precaution
1-2.
Many semiconductors and ESDs in electronic devices are particularly sensitive to static discha rge and can be easily damaged by it. We recommend protecting these components with cond uctive anti-static bags when you store or transport them.
Always use an anti-static strap or wristband and remove electrostatic buildup or dissipate static electricity from your body before repairing ESDs.
Ensure that soldering irons have AC adapter with ground wires and that the ground wires are properly connected.
Use only desoldering tools with plastic tips to prevent static discharge.
Properly shield the work environment from accidental electrostatic discharge before opening packages containing ESDs.
The potential for static electricity discharge may be increased in low humidity environments, such as air-conditioned rooms. Increase the airflow to the working area to decrease the chance of accidental static electricity discharges.
1-2
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Level
6.
S/W Download
6-1.
Repair
6
6-1-1.
Service Parts
-
Pre-requisite for S/W Downloading
Downloader Program
y
GT-P7510 Mobile Phone
y
Data Link Cable
y
Binary files
y
Anyway Jig Adaptor IF Cable RF Cable
GH99-36900B GH99-38251A GH81-09211A GH39-00985A
MEA FRONT-LCD
(Odin3 v1.83.exe)
GH97-12511A
Settings
Data Link Cable
6-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Level6Repair
6-1-2.
S/W Downloader Program
Load the binary download program by executing the
Odin3 v1.83.exe"
"
Run this file.
Å
Option Selection
.
1
Check Re-Partition, Auto Reboot and F. Reset Time, then select PIT File
-
6-2
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Enter Device into Download Mode
.
2
Press down on Volume Down button and power key at same time for
-
Level6Repair
seconds
10
Power key
Press down on Volume Up button to enter device into download mode
-
Volume Down Button
Volume Up Button
6-3
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Loading...
+ 40 hidden pages