Samsung GT-I8190 Disassembly & Reassembly
Level
7.
Disassembly
7-1.
Repair
2
1 2
Unscrew the screw in Rear(10 points)
1.
SEC CODE
-
Disassemble Rear
2.
: 6001-002667 , 1.4
X4
Separate the connectors(2Points)
1.
3 4
Disassemble PBA(Right→Left)
1.
Separate the LCD connector(1Point)
2.
5
Separate the Camera connectors(2Points)
1.
Unscrew the screw in PBA(1 point)
2.
SEC CODE
-
: 6001-002051, 1.4
X2.5
Bracket+LCD module
1.
LCD,Bracket can not be separated in normal
(
condition)
7-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Level2Repair
7.
Assembly
7-2.
1 2
Place on Bracket+LCD Module
1.
LCD,Bracket can not be separated in normal
(
condition)
Aassemble Cameras(5Mega&VGA)
1.
Screw the speaker module screw(1POINT)
2.
SEC CODE
-
Torque
-
: 6001-002051 , 1.4
:1.1±0.1
Kgf·cm
X2.5
3 4
Aassemble LCD Connector(1POINT)
1.
Aassemble PBA(Left→Right)
2.
5
Aassemble Rear
1.
Screw10points in Rear
2.
SEC CODE
-
Torque
-
: 6001-002667 , 1.4
:1.1±0.1
Kgf·cm
X4
Aassemble the Connectors(2POINT)
1.
7-2
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Loading...