Page 1
SCH-U440 Series
PORTABLE DUAL-BAND
MOBILE PHONE
User Manual
Please read this manual before operating your
phone, and keep it for future reference.
Page 2
U440.05_CC10_CB_031709_F4
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to
the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to
Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited
to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation
and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you
agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or
otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All
applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA), LLC
Headquarters: Customer Care Center:
1301 E. Lookout Drive 1000 Klein Rd.
Richardson, TX 75082 Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Internet Address: http://www.samsungusa.com
©2009 Samsung Telecommunications America, LLC is a registered trademark of Samsung Electronics America, Inc. and its related
entities.
Do you have questions about your Samsung Mobile Phone?
For 24 hour information and assistance, we offer a new FAQ/ARS System (Automated Response System) at:
www.samsungtelecom.com/support
GH68-22565A
Page 3
Printed in Korea.
Nuance®, VSuite™, and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc. or its affiliates in the
United States and/or other countries.
Openwave® is a registered Trademark of Openwave, Inc.
The Bluetooth® word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered
trademarks and are wholly owned by the Bluetooth SIG.
microSD™ and the microSD logo are Trademarks of the SD Card Association.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT “AS IS”, AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Page 4
1
Table of Contents
Section 1: Getting Started .............................................. 4
Understanding this User Manual . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Removing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Activating Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Memory Card (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Section 2: Understanding Your Phone .........................10
Features of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Closed View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Open View (Front) of Your Phone . . . . . . . . . . . . . . . . . . . . . . . 12
Command Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Understanding the Display Screens . . . . . . . . . . . . . . . . . . . . . 16
Your Phone’s Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Section 3: Call Functions .............................................21
Making a Call — Number Entry Dialing . . . . . . . . . . . . . . . . . . 21
Making a Call — Contact Dialing . . . . . . . . . . . . . . . . . . . . . . 23
Making a Call — Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . 23
Making a Call — Quick Search Dialing . . . . . . . . . . . . . . . . . . 24
Making a Call — Voice Dialing . . . . . . . . . . . . . . . . . . . . . . . . 25
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Calls Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Section 4: Menu Navigation ......................................... 34
Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Navigation Key Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Navigate Using a Shortcut . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Navigate Using Quick Search . . . . . . . . . . . . . . . . . . . . . . . . . 35
Section 5: Understanding Your Contacts .................... 36
Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Finding a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Adding a New Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . 39
Editing a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Saving a Number After a Call . . . . . . . . . . . . . . . . . . . . . . . . . 43
Speed Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Contacts Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Deleting a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Memory Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Section 6: Messaging ................................................... 50
Types of Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Create and Send Text Messages . . . . . . . . . . . . . . . . . . . . . . 50
Receive Text Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Send Picture Messages in Camera Mode . . . . . . . . . . . . . . . . 53
Send Picture Messages in Standby Mode . . . . . . . . . . . . . . . . 54
Receive Picture Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Message Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Erase Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Page 5
2
Message Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Section 7: Music Player ................................................66
Using Your Music Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Launching the Music Player . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Using the Music Library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Music Player Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Loading Music Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Playlists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Section 8: Camera ........................................................73
Taking Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Camera Screen Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Picture Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Camera Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
My Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Point, Click, and Send Pictures . . . . . . . . . . . . . . . . . . . . . . . . 83
Section 9: easyedgeSM ..................................................84
Accessing
easy
edgeSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Launching an Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Finding and Downloading Applications . . . . . . . . . . . . . . . . . . 84
Section 10: Toneroom .................................................. 85
Accessing Toneroom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Managing Your Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Section 11: Multimedia ................................................ 86
Accessing Multimedia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
My Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
My Ringtones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
My Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Section 12: Bluetooth ................................................... 91
Turn Bluetooth On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Accessing Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Registered List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Bluetooth Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Section 13: Tools .......................................................... 94
Tools Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Voice Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Memo Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
World Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Stop Watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Tip Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Section 14: Changing Your Settings .......................... 110
Accessing Your Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Call Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Phone Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Page 6
3
Memory Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Phone Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Section 15: Health and Safety Information ...............129
Health and Safety Information . . . . . . . . . . . . . . . . . . . . . . . . 129
Samsung Mobile Products and Recycling . . . . . . . . . . . . . . . 130
UL Certified Travel Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Consumer Information on Wireless Phones . . . . . . . . . . . . . . 131
Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Responsible Listening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Using Your Phone Near Other Electronic Devices . . . . . . . . . 140
FCC Hearing-Aid Compatibility (HAC) Regulations for
Wireless Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Potentially Explosive Environments . . . . . . . . . . . . . . . . . . . . 142
Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
FCC Notice and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Other Important Safety Information . . . . . . . . . . . . . . . . . . . . 144
Product Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Availability of Various Features/Ring Tones . . . . . . . . . . . . . . 145
Battery Standby and Talk Time . . . . . . . . . . . . . . . . . . . . . . . 146
Battery Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Section 16: Warranty Information .............................149
Standard Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 149
End User License Agreement for Software . . . . . . . . . . . . . . 152
Index ............................................................................157
Page 7
Getting Started 4
Section 1: Getting Started
This section explains how to start using your Samsung U440
phone by activating your service and setting up your Voicemail,
and explains how this manual is put together.
Understanding this User Manual
The chapters of this manual generally follow the same order as
the menus and sub-menus in your phone. A robust index for
quick reference to most features begins on page 157.
Also included is important safety information that you should
know before using your phone. Most of this information is near
the back of the guide, beginning on page 129.
Notes and Tips
Throughout this manual some text is set apart from the rest. In
this way, important information, quick methods for activating
features, to define terms, and more are emphasized. The
definitions for these methods are as follows:
•
Notes
— Explain alternative options within the current feature, menu,
or sub-menu.
•
Tips
— Provide quick or innovative methods for performing functions
related to the subject at hand.
•
Important
— Points out important information about the current
feature that could affect performance, or even damage your phone.
Text Conventions
This manual provides condensed information about how to use
your phone. To make this possible, the following terms and icon
appear in place of repeatedly-used procedural steps:
Installing the Battery
Note:
Your phone comes packaged with a partially charged rechargeable standard
Li-Ion battery and travel adapter.
highlight
Use the Navigation key ( ) to move a highlighting
effect onto a menu item or screen item of interest.
select
After “highlighting” a menu item or screen item,
press the
MENU-OK
key ( ) to launch, access, or
save a highlighted menu item or screen field of
interest.
➔ Used in place of “select” in long “drill down”
procedure steps.
Example:
“...
Settings
➔
Call Settings
➔
Call Answer
...”
Page 8
5
Important!:
You must fully charge the battery the first time you use your
phone, otherwise you could damage the battery.
1. Insert the top end of the battery first, matching the gold
contacts on the top of the battery to those inside of the
phone battery compartment.
2. Lightly press the bottom end of the battery down into the
phone until it slips into place.
3. Place the battery cover over the battery (1) and press
lightly upward (2) until it clicks into place.
Removing the Battery
1. Press and hold to turn off the phone (if on).
Page 9
Getting Started 6
2.
Press up on the battery cover (1) and slide the cover
toward the top end of the phone. Lift the cover (2) up and
away from the phone, bottom end first.
3. Lift the bottom of the battery up (1) and away (2) from the
phone.
Charging the Battery
Your phone is powered by a rechargeable standard Li-Ion battery.
Only use Samsung-approved charging devices and batteries.
Samsung accessories are designed to maximize battery life. Use
of other accessories may invalidate your warranty and may cause
damage.
Use the Travel Adapter
The travel adapter included
with your phone is a
convenient, light-weight
charger that rapidly charges
your phone from any 120/220
VAC outlet.
1. Plug the large end of the Travel Adapter into a standard
120 VAC or 220 VAC wall outlet.
Important!:
For connection to an electrical supply not located in North
America, you must use an adaptor of the proper configuration for
the power outlet. Use of the wrong adapter could damage your
phone and void your warranty.
Page 10
7
2.
Insert the smaller end of the Travel Adapter into the
charger/accessory connector on the right side of your
phone.
Important!:
You must unplug the adapter before removing the battery from
the phone during charging to avoid damage.
Low Battery Indicator
The battery indicator ( ) in the upper-right corner of the
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
Five bars ( ) indicate a full charge.
An empty battery icon ( ) indicates a near empty battery.
A blinking empty battery icon ( ) and a tone sounding
indicate you have two to three minutes before the battery is too
low to operate the phone.
If you continue to use your phone without charging its battery, the
phone will shut down.
Activating Your Phone
Contact your Wireless Carrier and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
Turning Your Phone On
1. Open the flip on your phone, as
shown.
2. Press .
Note:
As with any other radio-transmitting
device, do not touch the antenna while
using your phone as this can affect call
quality and can cause the phone to
operate at a higher power level than is
necessary.
3. The phone begins searching for a network signal.
4. Once the phone finds a signal, the time, date, and day
appear at the top of the display.
+
Press
Internal
Antenna
Page 11
Getting Started 8
5.
You’re now ready to place and receive calls.
Note:
If you are outside of your carrier’s coverage or roaming area ( ), the No
Service icon ( ) appears at the top of the phone’s display. If you cannot
place or receive calls, try later when service is available, or at another
location.
Turning Your Phone Off
䊳
Press and hold for two or more seconds. Your
phone powers off.
Note:
If your phone is on and you press for less than one second, the phone
will not power off. This prevents your phone from being turned off
accidentally.
Setting Up Your Voicemail
Voicemail allows callers to leave voice messages, which can be
retrieved any time.
Note:
Once your Voicemail account has been set up, you can use the Voicemail
folder (under the Message menu) to view details of voice messages in your
Voicemail box.
1. In standby mode, press and hold or dial your own
mobile number to dial Voicemail.
2. Follow the prompts in the new user tutorial to setup your
mail box.
Listen to Voicemail
䊳
In standby mode, press and hold or dial your own
mobile number to dial Voicemail. After connecting, you will
hear your voice greeting. You are prompted to enter your
password.
Memory Card (Optional)
Your phone has a Memory Card slot on its left side, across from
the keypad. You can install a microSD™ card to provide
additional memory for storing files (such as, sound files and
photos) in your phone.
Install a Memory Card
1. Open the microSD cover on the left side of your phone. (For
more information, refer to “Closed View of Your Phone” on
page 10.)
Page 12
9
2.
Insert the memory card — contact side facing up and
smaller end pointing toward the phone — into the memory
card slot.
3. Press the memory card into the slot until the card locks
into place.
4. Replace the microSD cover.
Remove a Memor y Card
1. Open the microSD cover on the left of your phone. (For
more information, refer to “Closed View of Your Phone” on
page 10.)
2. Press the memory card inward until the card lock releases.
3. Remove the memory card from the memory card slot.
4. If desired, install another memory card. (For more
information, refer to “Install a Memory Card” on page 8.)
5. Replace the microSD cover.
Page 13
Understanding Your Phone 10
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also
describes the screen format and the icons that will be displayed
when the phone is in use.
Features of Your Phone
•
Domestic and international voice and text messaging service (available
on participating networks).
•
High speed data (CDMA 2000 1x Technology)
•
Bluetooth® Wireless Technology (see Note)
•
Global Positioning System (GPS) Technology
•
Digital Assistant Tools
•
QWERTY Keypad
•
Picture (MMS) Messaging
•
Text (SMS) Messaging
•
Built-in 1.3 Megapixel Digital Camera
•
Voice Dial
•
Music Player (MP3 — requires an optional Memory Card)
•
Memory Card Slot (microSD™ — up to 8 Gb)
Note:
The U440 phone supports the wireless headset, hands-free, dial-up
networking, A2DP, Phonebook Access, serial port, file transfer profiles
for Bluetooth® wireless technology. The U440 does not support all
Bluetooth OBEX profiles.
Closed View of Your Phone
Features
1.
Volume Key
— In standby mode, lets you adjust the
incoming call ringer volume. When receiving a call, lets
you temporarily mute the ringer. In Music Player mode, lets
you browse available music selections or adjust music
playback volume.
Page 14
11
2.
microSD (Memory Card) Slot
— Lets you install and remove
optional microSD Memory Card for additional image/photo
storage and for music storage.
3.
Camera Lens
— The lens of your built-in camera.
4.
Front Display
— In standby mode, indicates the status of
your phone, including status icons, message indicators,
signal strength, and so on. In Music Player mode, lists
available music selections, indicates music playback
progress, shows music playback volume. In Camera mode,
shows camera viewfinder screen without icons.
5.
Headset Connector
— Used to connect an optional headset
(for hands free operation and/or music playback) or an
optional TTY device.
6.
Camera Key
— In standby mode, lights the front display
backlight and launches the Camera feature of your phone.
In Camera mode, takes pictures.
7.
Power
/
Accessory Connector
— Used to connect charging
accessories or optional accessory cables to your phone.
Page 15
Understanding Your Phone 12
Open View (Front) of Your Phone
Features
1.
Main Display
— Indicates the status of your phone,
including numbers dialed, feature and function screens,
status icons, message indicators and contents, signal
strength, and so on.
2.
Left Soft Key
— Used to navigate through menus and
applications and to select the choice indicated at the
bottom left corner of the Main LCD.
3.
Speakerphone Key
— Press and hold to turn Speakerphone
mode On and Off.
4.
SEND/Voice Commands Key
— Lets you place or receive a
call. In standby mode, press the key once to access the
recent calls log. Press and hold this key to activate Voice
Commands.
5.
QWERTY Keypad
— Use these keys to enter numbers,
letters, and symbols.
6.
Fn Key
— Toggles the text input mode to let you use the
QWERTY keypad to enter numbers and symbols as well as
letters.
2
5
4
7
3
1
18
14
13
10
11
12
6
16
15
17
8
9
Page 16
13
7.
Shift Key
— Toggles capitalization for text input between
mixed case (Abc), uppercase (ABC), and lowercase (abc).
Capitalization remains as selected until you press the Shift
key again.
8.
Space Key
— Lets you enter spaces between words and
characters.
9.
Microphone
— Lets the other caller hear you clearly when
you are speaking to them.
10.
Hot Keys
— Launch the Calendar tool and the Messages
menu.
11.
Enter Key
— Press to accept a text entry or to enter spaces
between lines of text.
12.
Backspace Key
— In text entry mode, deletes characters
from the display.
13.
END Key
— Ends a call. If you press and hold the END key,
the power goes On or Off. When you receive an incoming
call, press to send the call to voicemail.
14.
BACK Key
— In text entry mode, deletes characters from
the display. In menu mode, returns you to the previous
menu or screen.
15.
Right Soft Key
— Used to navigate through menus and
applications and to select the choice indicated at the
bottom right corner of the Main Display.
16.
MENU-OK Key
— In standby mode, launches the Main
Menu. When navigating through a menu, accepts the
highlighted choice in a menu.
17.
Navigation Key
— In Menu mode, lets you scroll through
the phone menu options. In Standby mode, lets you access
preset functions and one user-defined function.
18.
Earpiece
— Lets you hear ringing and alert tones, alarm
tones, and the other parties to calls.
Command Keys
Soft Keys
Functions for the soft keys are indicated by labels that appear in
the display above each soft key. There are two soft keys, Left
( ) and Right ( ).
Left Soft Key
Some functions of the Left soft key ( ) are as follows:
•
In standby mode, press the
Msgs
soft key ( ) to open the
Messages
menu.
Page 17
Understanding Your Phone 14
•
When the Left soft key function is Edit, press the
Edit
soft key
( ) to edit a Contacts entry.
Right Soft Key
Some functions of the Right soft key ( ) are as follows:
•
In standby mode, press the
Contacts
soft key ( ) to launch the
Contacts
Find
screen.
•
When the Right soft key function is Options, press the
Options
soft key
( ) and a pop-up menu appears.
•
When the Right soft key function is Back, press the
Back
soft key
( ) to back up one menu level.
MENU-OK Key
•
In standby mode, press the
MENU-OK
key ( ) to launch the Main
Menu.
•
In a menu, press to accept the highlighted selection.
•
In camera mode, press to take a photo or to create a Picture
message.
•
When the
MENU-OK
key function is Edit, press the
Edit
key ( ) to
edit a Draft message.
Speakerphone Key
In standby mode or during a call, pressing and holding the
Speakerphone key ( ) places your phone in speakerphone
mode, allowing you to use your phone hands-free and/or to
include other nearby persons in a call. (For more information,
refer to “Responsible Listening” on page 138.)
In speakerphone mode, pressing and holding the Speakerphone
key ( ) disables speakerphone mode.
SEND Key
The
SEND
key ( ) is used to answer calls, dial calls, and to
recall the last number(s) dialed, received, or missed.
•
Press once to answer calls.
•
Enter a number and briefly press to make a call.
•
Briefly press in standby mode to display a list of recent calls to
and from your phone.
•
Press twice in standby mode to call the most recent number.
•
Press and hold in standby mode to launch Voice Signal.
•
Press to pick up a waiting call. Press again to switch
back to the other call.
BACK Key
The
BACK
key ( ) is used to erase or clear numbers, text, or
symbols from the display. You can also use the key to return to a
previous menu or to return to standby mode from any menu.
•
If you enter an incorrect character, briefly press to backspace
(and delete) the character.
•
To erase the entire sentence, press and hold .
•
To back up one menu level, briefly press .
Page 18
15
End Key
•
Press and hold the
End
key ( ) to turn your phone on or off.
•
Briefly press once to disconnect a call.
•
Press to return to standby mode from any menu, or to cancel
the last input.
Navigation Key
Use the directional keys on the Navigation key ( ) to browse
menus, sub-menus, and lists. Each directional key also acts as a
shortcut to launch applications. (For more information, refer to
“Navigation Key Shortcuts” on page 34.)
Camera Key
In standby mode, press and hold the Camera key ( ) —
located on the right side of your phone — to activate the camera
built into your phone.
In camera mode, pressing the Camera key ( ) takes a picture
Note:
For more information, refer to “Camera” on page 73.
Entering Text
Your phone has a QWERTY ( ) keypad to
support quick and easy text input. You can enter text as you
would when using a computer keyboard.
The keys are labeled with a letter on the upper half and a number
or symbol on the lower half. Press the key corresponding to the
character you want to enter.
In addition, you can use the following special function keys:
Press to delete characters.
Tip:
You can also delete a character by pressing .
Press to start a new line.
Press once to enter a single upper case letter.
Press twice to select CAPS LOCK.
Press once more to remove CAPS LOCK.
Page 19
Understanding Your Phone 16
Understanding the Display Screens
Main Display
1. The top line of your phone’s display contains icons that
indicate network status, battery power, signal strength,
and more. (For more information, refer to “Display Screen
Icons” on page 17.)
2. Icon indicates the Auto Answer feature is enabled. (For
more information, refer to “Auto Answer” on page 116.)
3. The center portion of the display shows information such
as call progress information, messages, and photos.
4. The bottom line of the display shows current soft key
functions. The sample screen shows that pressing the Left
(
Msgs
) soft key will display the
Messages
menu, pressing
the
MENU-OK
key ( ) will display the Main
Menu
, and
pressing the Right (
Contacts
) soft key will show the
Contacts
Find
screen.
Front Display
1. The top line of the front display
contains icons that indicate
network status, battery power,
signal strength, and more. (For
more information, refer to “Display
Screen Icons” on page 17.)
2. The center portion of the display shows the clock and
calendar and shows information about such occurrences
as incoming calls, new messages, and charging status.
Press to pop-up the first of three pages of symbols. Select
a symbol by pressing the associated number key.
Press to toggle entry mode between Abc and 123.
Press to insert a space in a text entry.
1
2
3
4
Page 20
17
Display Screen Icons
Your U440 phone can show you definitions of the icons that
appear on the top line of the displays.
To access the Icon Glossary:
䊳
In standby mode, press
Menu
( ), then select
Settings
➔
Phone Info
➔
Icon Glossary
. A list appears showing the
icons that can appear on the top line of the displays.
Dialogue Boxes
Dialogue boxes prompt for action, inform you of status, or warn
of situations such as low battery. Dialogue boxes and their
definitions are outlined below.
•
Choice
–
Example:
“Save Message?”
•
Reconfirm
–
Example:
“Erase All Messages?”
•
Performing
–
Example:
“Sending...” “Connecting...”
•
Completed
–
Example:
“Message Saved”
•
Information
–
Example:
“New Message”
•
Error
–
Example:
“System Error!”
•
Warning
–
Example:
“Low Battery,” “Memory Full!”
Backlights
Backlights illuminate the display and the keypad. When you press
any key or open the phone, the backlights come on. They go off
when no keys are pressed within a period of time set in the
Backlight menu.
Note:
During a phone call, the display backlight dims and turns off after 7
seconds to conserve battery power, regardless of the Backlight setting.
(For more information, refer to “Backlight” on page 115.)
Your Phone’s Modes
Standby Mode
Standby mode is the state of the phone once it has found service
and is idle. The phone goes into standby mode:
•
After you power the phone on.
•
When you press after a call or from within a menu.
In standby mode, you will see the time, day, and date as well as
all phone status icons.
Place Calls in Standby Mode
1. While in standby mode, enter a phone number, and press
to place a call.
Page 21
Understanding Your Phone 18
2.
Press to return to standby mode.
Receive Messages in Standby Mode
You can receive messages in standby mode. An alert tone sounds
and a notification message appears in the display when a new
message arrives. The following call message options appear:
•
View Now
— This selection allows you to view the messages now.
•
View Later
— This selection allows you to view the messages at a
later date.
Highlight the desired viewing option and then press .
Adjust the Ringer
In standby mode, press the Volume key (on the left side of the
phone) up or down.
1. In standby mode, press the Volume key up or down to set
the call ringer volume as desired.
Options are:
When you are satisfied with the setting, press
SET
. Your phone
returns to standby mode.
Tip:
You can also enter the
Volume
>
Voice Calls
sub-menu by pressing
Menu
➔
Settings ➔ Sounds ➔ Volume ➔ Voice Calls
. Use the Volume key on
the left side of your phone to adjust the ringer volume setting.
Note:
The Vibrate icon ( ) appears in the display when the phone is in
Vibrate
mode. The Vibrate/Ring icon ( ) appears in the display when
the phone is in
Vibrate/High
mode.
Call Answer Mode
You can choose to answer a call by pressing any key except
or , by pressing only , or by opening the
phone’s flip. (For more information, refer to “Call Answer” on
page 116.)
Talk M o de
You can place and receive calls only when your phone is on.
While in a call, your phone is in talk mode. Press the
Options
soft
key to display a list of menu options. (For more information, refer
to “The In-Use Options Menu” on page 27.)
Enter/Exit Silent Mode
Silences the tones your keypad makes when you press a key.
To enter Silent Mode:
䊳
In standby mode, press and hold . “
Entering Silent
Mode
” briefly appears in the display, the current ringer icon
•Ringer Off •Medium
•Vibrate •Medium/High
•Low •High
• Low/Medium • Vibrate/High
Page 22
19
changes to the Silent Mode icon ( ), and your phone
returns to standby mode.
To exit Silent Mode:
䊳
While in Silent mode and standby mode, press and hold
. “
Exit Silent Mode
” briefly appears in the display, the
former ringer icon returns, and your phone returns to
standby mode.
Vibrate Mode
In standby mode, repeatedly press the Volume key ( ) down
until “
Vibrate
” appears in the display.
The Volume key is on the left side of phone.
Speakerphone Mode
Speakerphone mode lets you use your phone hands-free and/or
share calls with others.
•
Entering Speakerphone Mode
— In standby mode, press and hold
the Speakerphone key ( ) — on the right side of the phone.
•
Exiting Speakerphone Mode
— In Speakerphone mode, press and
hold the Speakerphone key ( ).
Hands-free Mode
Hands-free mode lets you operate your phone remotely, without
touching it other than to turn it on or off.
To place your phone in Hands-free mode, do one of the following:
•
Connect an optional wired headset.
– or –
•
Pair and connect an optional Bluetooth technology headset or handsfree car kit. (For more information, refer to
“Add New Device”
on
page 91.)
Camera Mode
Camera mode lets you take pictures with your phone’s camera.
In Camera mode, you can also adjust the resolution and
appearance of your pictures.
(For more information, refer to “Multimedia” on page 86.)
•
Entering Camera Mode
— In standby mode, press and hold the
Camera key ( ) — on the right side of the phone.
•
Exiting Camera Mode
— Press .
Note:
You can also enter Camera mode by pressing
Menu
( ) and selecting
Multimedia
➔
Camera
.
Page 23
Understanding Your Phone 20
Input Mode
Input mode determines how you enter text, numbers, and
symbols. While at any text entry screen, press the Left soft key,
then choose the input mode from the pop-up menu using the
Navigation key. Optional input modes are
Abc, ABC, 123
, and
Symbols
. (For more information, refer to “Entering Text” on
page 15.)
Tip:
You can toggle between
Abc
and
123
entry modes by pressing .
Lock Mode
When the phone is in Lock Mode, restrictions are placed on
phone use. You can receive calls and messages, but cannot place
outgoing calls (except for emergency numbers) until you unlock
the phone. Lock Mode also restricts access to menus and the
Volume key. Unlock your phone by entering the lock code when
prompted. (For more information, refer to “Change Lock” on
page 120.)
Page 24
21
Section 3: Call Functions
This section explains how to make and answer calls. This section
also includes the features and functionality associated with
making or answering calls.
Making a Call — Number Entry Dialing
1. With the phone on, enter the number you wish to call using
the keypad.
2. Press to place the call.
Dialing Emergency Numbers
To place an emergency call:
1. With the phone on, enter 911 using the keypad.
2. Press to place the call.
You can specify other numbers as emergency numbers using the
Emergency # settings. (For more information, refer to
“Emergency #” on page 121.)
Important!:
Emergency number 911 is preset into your phone. You can dial
this number almost any time, even when the phone is locked or
restricted.
If you call 911 an audible tone is heard and an Emergency
prompt appears in the display for the duration of the call.
Important!:
Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
Important!:
DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
Dialing International Numbers
Call Another Countr y —
Manual Method
1. In standby mode, enter
011 (the three-digit exit
code for the United
States).
2. Enter the country code
for the country that you are calling (in this example, 82 for
South Korea).
3. Enter the number that you wish to call, then press .
Page 25
Call Functions 22
Note:
Puerto Rico and Canada are on the North American dialing plan.
Making calls to Puerto Rico and Canada is similar to making calls
within the United States, no unique country codes are necessary.
Call Another Country —
Shortcut Method
1. In standby mode, press
and hold until a plus
sign (+) appears in the
display.
Note:
When you press , your
phone automatically replaces this + with 011, the three-digit exit code
for the United States.
2. Enter the country code
for the country that you
are calling, or press and
hold until a second
plus sign (+) appears in
the display.
Tip:
If you place most or all of your
international calls to numbers in
the same country, set-up the
International Dialing shortcut
to dial that country’s code for
you. (For more information,
refer to “International Dialing”
on page 118.)
Note:
When you press , your phone automatically replaces the second
+ with the two-digit country code you have selected for the
International Dialing shortcut.
3. Enter the number that you wish to call, then press .
Manual Pause Calling
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
To manually call a number with pause(s) without storing it to your
Contacts:
1. Enter the number you wish to call.
Page 26
23
2.
Press the Options soft key. A pop-up menu containing the
following options appears in the display:
•
2-Sec Pause
— P pause — A two-second pause stops the
calling sequence for two seconds and then automatically sends the
remaining digits.
•
Wait
— W pause — A hard pause stops the calling sequence until
you press .
3. Highlight the desired pause option.
4. To enter the highlighted pause into your number sequence,
press .
Note:
If you select 2-Sec Pause, P appears in the display. If you select Wait,
W appears in the display.
5. Press to call the number.
Making a Call — Contact Dialing
You can store phone numbers and contact names in your phone’s
Contacts list. To call one of your Contacts, do the following:
1. Press the
Contacts
soft key. The Contacts
Find
screen
appears in the display.
2. Enter the first few letters of a Contacts list entry name. (For
more information, refer to “Entering Text” on page 15.)
The Contacts list displays the first few entries with names
matching the letters you entered.
3. Highlight the Contact you wish to call and press .
(For more information, refer to “Understanding Your
Contacts” on page 36.)
Making a Call — Speed Dialing
Speed Dialing lets you quickly and easily dial any contact in your
Contacts list by using that contact’s location number in the list.
You can assign and change location (speed dial) numbers for
your contacts. (See “Assignment During Entry Creation” on
page 44.)
One-Touch Dialing
Speed Dial numbers 2 through 9 are special One-Touch dialing
numbers. You can call the phone numbers stored in your phone’s
Contacts list and assigned Speed Dial numbers 2 through 9 by
pressing and holding a single key.
Example:
For Speed Dial number 3, press and hold the key until the name
and number appear in the display and the number is dialed.
Page 27
Call Functions 24
Two-Touch Dialing
Memory locations 10 through 99 are special Two-Touch dialing
locations.
Example:
For location number 13, briefly press , then press and hold
until the name and number appear in the display and the number is
dialed.
Three-Touch Dialing
Memory locations 100 through 999 are special Three-Touch
dialing locations.
Example:
For location number 113, briefly press , briefly press again,
then press and hold until the name and number appear in the
display and the number is dialed.
Pause Dialing From a Contacts Entry
•
If you speed dial a contact that contains (two-second) P pause(s)
simply wait for the pauses to pass and the dialing to complete.
•
If you speed dial a contact that contains (hard) W pause(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
Making a Call — Quick Search Dialing
While in standby mode, you can use the Quick Search feature to
find and dial any of your Contacts entries by entering the first few
letters of a Contact name. (For more information, refer to “Quick
Search” on page 123.)
Quick Search Dialing a Contact
To find and dial a Contact, do the following:
1. In standby mode, enter
the first few letters of
the Contact name, as
shown. (For more
information, refer to
“Entering Text” on
page 15.)
2. Press the Up navigation
key. The Contacts
Find
screen appears
showing the desired
Contact name, as
shown.
Page 28
25
3.
If needed, use the Up and Down navigation keys to
highlight the Contact you wish to call.
4. Press to call the highlighted Contact. (For more
information, refer to “Understanding Your Contacts” on
page 36.)
Making a Call — Voice Dialing
Your U440 mobile phone includes state-of-the-art voice
recognition software that lets you dial numbers using your voice.
Using Voice Dial
Use the Voice Dial command to dial any number stored in your
Contacts list by saying the name of the contact (Name Dialing).
You can also use Voice Dial to dial any valid telephone number,
even numbers not stored in your Contacts list, by speaking the
individual digits in the number (Digit Dialing).
Voice Dialing Tips:
•
Wait for the beep before speaking.
•
Speak clearly at a normal volume, as if you were talking to someone
on the phone.
•
When saying a name, say the first name then the last name.
Dialing a Name
To dial a name, do the following:
1. In standby mode, press and hold .
“Say a Command” appears in the display and is
pronounced through the earpiece.
2. Say, “Call”.
You are prompted to “Say the name or #”.
3. Speak clearly and say the name of a person in your
Contacts list, first name followed by last name.
If the name is recognized, Voice Dial repeats the name and
dials the number.
If Voice Dial is not sure which name you said, it displays a
choice list of up to three names and prompts you with “Did
you say?” followed by the first name on the list.
4. Say “Yes ” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
the list. (For more information, refer to “Choice Lists” on
page 96.)
•
Press the
Repeat
soft key to say the name again.
Page 29
Call Functions 26
•
Press the
Settings
soft key, then press the
Exit
soft key to exit
Voice Dial without dialing.
If the recognized name has multiple numbers stored for it
(that is, Home, Work, Mobile, and so on), Voice Dial
displays the possible choices and prompts you with
“Which number?”
5. Say one of the following number types:
•“Home
”
•“Work
”
•“Mobile
”
Voice Dial dials the specified number.
Dialing a Number
To dial a number using Voice Dial, do the following:
1. In standby mode, press and hold .
“Say a Command” appears in the display and is
pronounced through the speaker.
2. Say “Call”.
VoiceSignal prompts you to “Say the name or #”.
3. Speak clearly and say the telephone number of the person
you want to call. For example, say “7 8 1 5 5 5 6 2 0 0."
If it recognizes the number, Voice Dial repeats and dials the
number. If Voice Dial is not sure it has recognized the
number, it displays a choice list of up to three numbers and
prompts you with “Did you say?” followed by the first
number on the list.
4. Say “Yes ” to confirm the number or “No” to hear the next
one, or use the keypad to select the correct number from
the list. (For more information, refer to “Choice Lists” on
page 96.)
•
To say the name again, press the
Repeat
soft key.
•
To exit Voice Dial without dialing, press .
Pause Dialing From a Contacts Entry
•
If you voice dial a contact that contains 2-Sec (P) pause(s) simply wait
for the pauses to pass and the dialing to complete.
•
If you voice dial a contact that contains Wait (W) pause(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
Answering a Call
Your phone notifies you of a call in the following ways:
•
A ringtone sounds and/or your phone vibrates (Your phone provides
seven ring volume settings including:
Ringer Off
,
Vibrate, Low, Low/
Page 30
27
Medium, Medium, Medium/High, High
, or
Vibrate/High
, and/or
different ring types to distinguish callers.)
•
A phone number (unless blocked by the caller) and a name appear in
the display (If the caller’s number and name are stored in your
Contacts list).
•
If the caller can’t be identified,
Call from unavailable#, Call from
restricted number
, or no number appears in the display.
•
Your phone continues to notify you of the call until one of the following
events occurs:
– You answer the call.
– You ignore the call.
– You mute the ringer.
– The calling party ends the call.
– The call is sent to voicemail.
Answering an Incoming Call
䊳
Open your phone, if closed, and press . The ringtone
and/or vibration stop and the caller’s voice can be heard in
the earpiece.
Tip:
You can set your phone to automatically answer calls or to answer calls
when you press any key but the key or automatically. (For more
information, refer to “Call Settings” on page 115.)
Note:
If you set the
Auto Answer
option to any value other than
Off
, the Auto
Answer icon ( ) displays.
Adjusting the Call Volume
During a call, press the Volume key ( ) Up or Down until the
you hear the other party to the call at the desired loudness. The
Volume key is on the left side of phone.
The In-Use Options Menu
You can access numerous menus and features while in a call.
Note:
If the call is disconnected while you are accessing the In-Use Option,
the In-Use Option disappears from the display and the phone
eventually returns to standby mode.
1. While in a call, press the Options soft key.
The following menu items appear in the display:
•
Message
— The
Messages
menu appears in the display. (For
more information, refer to
“Messaging”
on page 50.)
•
Contacts
— The Contacts Find
screen appears in the display.
• Recent Calls
— The recent calls list appears in the display.
•
Send DTMF
— Sends your phone number as DTMF tones.
•
Voice Privacy
— Select
Standard
or
Enhanced
voice privacy.
•
Location
— Lets you change your phone’s Location setting. (For
more information, refer to
“Location”
on page 110.)
Do one of the following:
Page 31
Call Functions 28
•
Select the desired sub-menu or feature.
•
Exit the menu by pressing .
Tip:
You can block/restore sound going to the other parties on this call by
pressing the Mute / Unmute soft key. This can reduce noise on
conference calls.
You can enable/disable Speakerphone mode by pressing and holding
. Speakerphone mode enables you to conduct a call hands-free
and to share a call with other people nearby. (For more information, refer
to “Responsible Listening” on page 138.)
Ignoring a Call
When you ignore an incoming call, the call is immediately
forwarded to your voice mail.
䊳
During an incoming call, press the Ignore soft key. The
caller is forwarded to your voice mail.
Muting the Ringer
To temporarily mute the Incoming Call ringer when receiving a
call, press the Volume key, on the left side of your phone, Up or
Down.
Note:
Muting the ringer does not forward an incoming call to your voice mail.
Calls Log
The Calls log retains information about Outgoing, Incoming, and
Missed calls. You can also view times for your last call and the
time totals for all calls.
Review the Calls Log
1. In standby mode, press Menu ( ), then select Calls.
The following Calls logs and options appear in the display:
• Outgoing Calls
• Incoming Calls
• Missed Calls
• All Calls
• Call Timer
• Data Counter
2. Select the Calls log that you wish to review or the function
you wish to access.
Note:
In cases where there is a Contacts match for a Calls log entry, the
name associated with the number appears in the display instead of the
number.
Page 32
29
Outgoing Calls
Your phone retains information about the last 90 outgoing calls
and stores them in the Outgoing calls log. You can review the
Outgoing calls log for the time and date of a call, as well as other
information.
Note:
To quickly view your most recent calls, briefly press in standby
mode. Up to 270 of your most recent outgoing, incoming, and missed
calls appear in the display.
1. At the Calls menu, select Outgoing Calls. A list of your
outgoing calls appears in the display.
2. Highlight a call, then press OPEN ( ) to view the Name
of the called party (if in the Contacts list), the number
dialed, the time and date the call was placed, and the
duration of the call (in minutes and seconds).
3. Press the Options soft key. A pop-up menu containing the
following options appears in the display:
•
Save
— Save the number to your Contacts.
•
Details
— Calls to Contacts Only — Shows the entry for the called
Contact.
•
Erase
— Erase the selected call from your Outgoing call log.
•
Lock/Unlock
— Protect the selected call from being erased.
•
Erase All
— Erase all calls from your Outgoing call log.
•
View Timer
— Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls.
4. Press the Msgs soft key to launch the Send Message
menu. The following options appear in the display:
•
Text Mess a ge
— Lets you send a text message to the selected
number called.
•
Picture Message
— Lets you send a picture message to the
selected number called.
Note:
For more information, refer to “Types of Messages” on page 50.
5. Select the desired message type to compose a message.
Incoming Calls
Your phone retains information about the last 90 Incoming calls
and stores them in the Incoming call log. You can review the
Incoming call log for the time and date of the call, as well as
other information.
1. At the Calls menu, select Incoming Calls. A list of your
Incoming calls appears in the display.
Page 33
Call Functions 30
2.
Highlight a call, then press OPEN ( ) to view the Name
of the caller (if in the Contacts list), the originating number,
the time and date the call was received, and the duration
of the call (in minutes and seconds).
3. Press the Options soft key. A pop-up menu containing the
following options appears in the display:
•
Save
— Save the number to your Contacts.
•
Details
— Calls from Contacts Only — Shows the entry for the
calling Contact.
•
Erase
— Erase the selected call from your Incoming calls log.
•
Lock/Unlock
— Protect the selected call from being erased.
•
Erase All
— Erase all calls from your Incoming calls log.
•
View Timer
— Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls.
4. Press the Msgs soft key. The following options appear in
the display:
•
Text Mess a ge
— Lets you send a text message to the selected
calling number.
•
Picture Message
— Lets you send a picture message to the
selected calling number.
Note:
For more information, refer to “Types of Messages” on page 50.
5. Select an option to perform its function.
Missed Calls
Your phone retains information about the last 90 missed calls
(calls that were never picked up) and stores them in the Missed
call log. You can review the Missed call log for the time and date
of the call, as well as other information.
1. At the Calls menu, select Missed Calls. A list of your
missed calls appears in the display.
2. Highlight a call, then press OPEN ( ) to view the Name
of the caller (if in the Contacts list), the originating number,
and the time and date the call was received.
3. Press the Options soft key. A pop-up menu containing the
following options appears in the display:
•
Save
— Save the number to your Contacts.
•
Details
— Calls from Contacts Only — Shows the entry for the
calling Contact.
•
Erase
— Erase the selected call from your Missed call log.
•
Lock/Unlock
— Protect the selected call from being erased.
•
Erase All
— Erase all calls from your Missed call log.
•
View Timer
— Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls.
Page 34
31
4.
Press the Msgs soft key. The following options appear in
the display:
•
Text Mess a ge
— Lets you send a text message to the selected
called number.
•
Picture Message
— Lets you send a picture message to the
selected called number.
Note:
For more information, refer to “Types of Messages” on page 50.
5. Select an option to perform its function.
All Calls
You can review all of the calls log entries (outgoing, incoming,
and missed calls) for the time and date of a call, as well as other
information.
1. At the Calls menu, select All Calls. A list of all logged calls
appears in the display.
2. Highlight a call, then press OPEN ( ) to view further
information about the call.
3. Press the Options soft key. A pop-up menu containing the
following options appears in the display:
•
Save
— Save the number to your Contacts.
•
Details
— Calls from Contacts Only — Shows the entry for the
calling/called Contact.
•
Erase
— Erase the selected call from your Calls log.
•
Lock/Unlock
— Protect the selected call from being erased.
•
Erase All
— Erase all calls from your Calls log.
•
View Timer
— Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls.
4. Press the Msgs soft key. The following options appear in
the display:
•
Text Mess a ge
— Lets you send a text message to the selected
calling/called number.
•
Picture Message
— Lets you send a picture message to the
selected calling/called number.
Note:
For more information, refer to “Types of Messages” on page 50.
5. Select an option to perform its function.
Call Timer
View the duration of your last call, total calls, and calls made
during the life cycle of you phone using the Call Timer feature.
Note:
Call Timer is not for billing purposes.
1. At the Calls menu, select Call Timer. The following timers
appear in the display:
•
Last Call
— View the duration of your last call.
Page 35
Call Functions 32
•
Outgoing Calls
— View the duration of the total outgoing calls
made on your phone since the last erasure.
•
Incoming Calls
— View the duration of the total incoming calls
received on your phone since the last erasure.
•
Roaming Calls
— View the total calls duration on your phone
while roaming since the last erasure.
•
All Calls
— View the duration of the total call, incoming, outgoing,
and data calls made on your phone since the last erasure.
•
Last Reset
— View the time and date all timers were last reset.
•
Lifetime Calls
— View the duration of all calls since your phone
was activated.
2. To reset a selected counter (except Last Reset and Lifetime
Calls), highlight the desired counter and press the Reset
soft key.
3. To reset all counters except Lifetime Calls, press the Reset
All soft key.
4. To exit the
Call Timer
list, press or .
Note:
Although most call timers can be erased, the Lifetime call timer can
never be erased.
Data Counter
View the amount of Transmit data, Receive data, and Total data
transmitted or received since the last time you reset the data
counters, and the Lifetime amount of data transmitted or
received.
Note:
Data Counter is not for billing purposes.
1. At the Calls menu, select Data Counter. The following
options appear in the display:
•
Tr an sm it
— View the total amount of data transmitted by your
phone since the last reset.
•
Received
— View the total amount of data received by your phone
since the last reset.
•
Tot al
— View the total amount of data sent or received by your
phone since the last reset.
•
Last Reset
— View the time and date all timers were last reset.
•
Lifetime Data Counter
— View the total amount of data sent or
received by your phone since activation (Lifetime Data Counter
cannot be reset).
2. To reset a selected counter (except Last Reset and Lifetime
Data Counter), highlight the desired counter and press the
Reset soft key.
3. To reset all counters except Lifetime Data Counter, press
the Reset All soft key.
4. To exit the
Call Timer
list, press or .
Page 36
33
Note:
Although most data counters can be erased, the Lifetime Data Counter
can never be erased.
Roaming
What is Roaming?
Roaming lets you use your U440 phone when you travel outside
of your Wireless Provider’s coverage area. The Roaming icon
( ) appears in the top line of the display when Roaming is
active, and extra charges may apply when making or receiving
calls.
Note:
Some features may be unavailable while roaming. Roaming also
consumes additional power from the battery requiring more frequent
recharging. Contact your Wireless Provider for more information about
Roaming.
How Roaming Works
Roam Option lets you set roaming preferences if you move in and
out of your home network. The following roaming options are
available:
•
Home Only
— Your phone is available for normal operation only in the
designated coverage area.
•
Automatic
— Your Wireless Provider’s Preferred Roaming List (PRL) of
networks is used to acquire service. If no preferred networks are
found, any digital system is acquired.
Note:
For more information, refer to “System Select” on page 122.
Page 37
Menu Navigation 34
Section 4: Menu Navigation
This section explains the menu navigation for your phone. It also
includes an outline of all the available menus associated with
your phone.
Menu Navigation
Access the menus and sub menus in your phone using the
navigation key ( ) and soft keys ( ), or use a
shortcut.
1. In standby mode, press Menu ( ). The first of several
menus appears in the display.
Note:
More than one menu may appear in your display. This setting can be
modified in the Display/Menu Style menu.
Tip:
You can launch any of the Main Menus by using a voice command — In
standby mode, press and hold until the phone prompts, “Say a
command.” Say “Go to” followed by a Main Menu name into the
microphone. For example, Say “Go to easyedge” to access the
easyedgeSM menu.
2. Use the navigation key to browse through the menus.
3. To enter the menu or sub menu that appears in the display,
press .
4. Press the Back soft key to return to the previous menu.
Return to the Previous Menu
•
Press the Right soft key
Back
to return to a previous menu.
•
When
Back
does not appear in the display, press to return to the
previous menu.
Navigation Key Shortcuts
In standby mode, press a navigation key to launch the key’s
corresponding application.
*Bluetooth, Messages
, and Music Player can be customized. Press
Menu
( ), then select
Settings
➔
Phone Settings
➔
Shortcut Key
.
Bluetooth*
Music Player*
Messages*
easyedge
SM
Page 38
35
Navigate Using a Shortcut
You can also access menus and sub menus using menu
numbers. After pressing Menu ( ), press the menu number to
go directly to the menu or sub menu of your choice. Before you
can navigate using a shortcut, you’ll need the menu or sub-menu
number that you wish to access.
1. In standby mode, press Menu ().
2. Press the number of the menu, sub menu, and so on for
the feature that you wish to access.
Example:
Press Menu ( ), then press , . This takes you to the Tools
menu (Menu 7), and then to the Alarm Clock (sub menu 4).
Navigate Using Quick Search
Use the Quick Search feature to find a menu or menu item by
entering the first few letters of menu name or menu item name.
(For more information, refer to “Quick Search” on page 123.)
Quick Search Accessing a Menu
To find and access a menu or menu item, do the following:
1. In standby mode, enter
the first few letters of
the menu name or
menu item name, as
shown. (For more
information, refer to
“Entering Text” on
page 15.)
2. Press the Down
navigation key. The
Menu List screen
appears showing the
matching menus and/or
menu items, as shown.
3. Select the desired
menu or menu item. The associated screen appears in the
display.
Page 39
Understanding Your Contacts 36
Section 5: Understanding Your Contacts
This section details how you can manage your daily contacts by
storing their names and numbers in your Contacts list. You can
have your Contacts entries sorted by name.
Contacts
Up to 500 entries can be stored in Contacts. Each entry can have
up to five associated phone numbers and one Email address.
Each phone number can be up to 32 digits in length, including
2-
Sec
or
Wait
pauses (see “Manual Pause Calling” on page 22 for
more information), and associated names can be up to 32
characters in length. You can assign the Speed Dial numbers of
your choice for each entry. You can also mark your Contacts list
as Restricted to prevent unauthorized viewing. (For more
information, refer to “Restriction” on page 122.)
Tip:
Speed Dial
One-Touch Dialing, Two-Touch Dialing
, and
Three-Touch
Dialing
allow you to call numbers stored in Contacts faster.
Open Contacts
1. In standby mode, press Menu ( ), then select
Contacts
.
The following options appear in the display:
•Find
— Find a Contacts entry by name.
Tip:
You can also access the
Find
option from standby mode, by pressing the
Contacts
soft key.
• Add New Contact
— Add a number or Email address to your
Contacts.
•Speed Dial
— Assign a Contacts entry to a Speed Dial number.
(For more information, refer to
“Speed Dial”
on page 44.)
•Group
— Review, send messages to, add Contacts to, or rename
four out of your five groups. (For more information, refer to
“Contacts Groups”
on page 46.)
•Memory Info
— Display used and available memory for Contacts
entries.
2. Select the option of your choice.
Note:
You can also press the keypad number key that corresponds to the
menu option number.
Finding a Contacts Entry
Shortcut Key Method
If you’ve stored a name entry in Contacts, Find allows you to find
it quickly by entering the first few letters of a Contact’s name.
1. In standby mode, press the
Contacts
soft key.
Page 40
37
The
Find
screen
appears in the display
with the
Go To
field
highlighted, followed by
the first few names in
your Contacts list.
Tip:
You can also access the
Find
screen from standby mode by pressing
Menu
( ), then selecting
Contacts
➔
Find
.
2. Enter the first few
characters of a name as
entered in Contacts. For
example, if you saved
the name as “Bill”,
begin the search by
pressing (for “B”).
As you enter letters, the names of the closest matches
appear in the display.
3. When the desired entry is listed in the display, use the Up/
Down navigation keys to highlight the entry.
•
Press to dial the number associated with the name.
•
Press the
Edit
soft key to add or change information for this entry.
•
Press
VIEW
( ) to show information about the entry.
•
Press the
Options
soft key. The following options appear in the
display:
–
New Contact
— Add a new entry to Contacts.
–
Erase
— Erase the name and associated information.
–
Send Txt Msg
— Create and send a text message to the selected
Contact.
–
Send Pic Msg
— Create and send a Picture message to the selected
Contact.
–
Call
— Dial the number associated with the name.
–
Send Name Card Via Bluetooth
— Send selected Contacts to
another Bluetooth device.
Select the desired option to access its sub-menu appears in the
display.
Voice Method
Use the VoiceSignal Lookup command to view contact
information for any named contact stored in your Contacts list by
saying the name.
Note:
The
Lookup
command shows the requested Contact information in the
display but does not dial a phone number for the contact.
Page 41
Understanding Your Contacts 38
To look up information for a
specific contact:
1. In standby mode, press
and hold to
launch VoiceSignal.
“
Say a Command
”
appears in the display
and is pronounced through the speaker.
2. Say “
Lookup
”.
VoiceSignal prompts
you to “
Say the name.
”
3. Speak clearly and say
the full name of the
person you want to call,
exactly as it is entered
in your Contacts list.
•
If VoiceSignal recognizes the name you said, the Contact entry
information for that name appears in the display.
•
If VoiceSignal does not recognize the name you said, a choice list of
up to three names appears in the display, and VoiceSignal prompts
you with “
Did you say?
” followed by the first name on the list.
4. Say “
Yes
” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
the list. (For more information, refer to “Choice Lists” on
page 96.)
•
To say the name again, press
Repeat
.
•
To exit VoiceSignal without dialing, press
Settings
and press
Exit
.
5. The contact information
for the name you
selected appears in the
display.
•
To dial the default number
associated with the name,
press .
•
To remove this entry from
your Contacts list, press the
Erase
soft key.
•
To add or change information for this entry, press
EDIT
().
•
To access the following options, press the
Options
soft key.
–
Send Txt Msg
— Create and send a text message to the selected
Contact.
–
Send Pic Msg
— Create and send a picture message to the selected
Contact.
–
Call
— Dial the number associated with the Contact name.
Page 42
39
–
Send Name Card Via Bluetooth
— Send the select Contact’s
information to another Bluetooth device.
Select the desired option.
Quick Search Method
Use the Quick Search feature to find and dial any number stored
in your Contacts list by entering the first few letters of a Contact
name. (For more information, refer to “Quick Search” on
page 123.)
1. In standby mode, enter
the first few letters of
the Contact name, as
shown. (For more
information, refer to
“Entering Text” on
page 15.)
2. Press the Up navigation
key. A list of Contact
names that begin with
letters you entered
appears in the display.
3. Highlight the searched for Contact.
•
To call the Contact, press .
•
To edit the Contact, press the
Edit
soft key.
•
To view the Contact, press .
Adding a New Contacts Entry
You can use either of two methods to add an entirely new entry to
Contacts.
Dial Method
1. Using the keypad, enter the number you wish to add to
your Contacts.
2. Press the
Save
soft key. The following options appear in
the display:
•Create New
— Lets you create a new Contacts entry.
• Update Existing
— Lets you add the number you entered to an
existing Contacts entry.
3. Select
Create New
.
The
Create New
screen appears in the display showing the
following icons:
Mobile
Home
Work
Pager
Fax
Page 43
Understanding Your Contacts 40
4.
Select the number type that matches your new entry.
5. Use the keypad to enter a name to associate with the
Contacts entry.
6. Press
SAVE
( ) to save the entry.
Menu Method
1. In standby mode, press
Menu
( ), then select
Contacts
➔
Add New Contact
.
The
Add New Entry
screen appears in the display with the
Name
field highlighted.
2. Enter the name of the new entry using the keypad. (For
more information, refer to “Entering Text” on page 15.)
3. Highlight one of the following fields:
• Mobile
•Home
•Work
•Pager
•Email
•Group
•Ringtone
•Fax
4. Enter a phone number or Email address in the highlighted
field.
5. Repeat steps 3 and 4 as needed.
6. Press to save the new entry.
Editing a Contacts Entry
Editing Contacts Name and Numbers
1. Find the Contacts entry you wish to change. (For more
information, refer to “Finding a Contacts Entry” on
page 36.)
2. Use the Navigation key
to highlight the entry
and press
VIEW
( ).
The
View Contact
screen
appears in the display
showing the highlighted
entry’s information.
3. Use the Navigation key to review the information for the
entry that you wish to change, then press
EDIT
().
The
Edit Contact
screen appears in the display.
Page 44
41
4.
Use the Navigation key
to highlight the
particular information
you want to add or
change.
•
Press to backspace
and delete numbers or
letters.
•
Press and hold to clear all numbers or letters in the highlighted
field.
•
Press the
Options
soft key.
The following options pop-up in the display:
–
Set Speed Dial
/
Remove Speed Dial
— Assign/remove a speed dial
number. (For more information, refer to
“Speed Dial”
on page 44..)
–
Set as default
— Set the number the phone will dial when Contacts
dialing or speed dialing.
–
Wait
— A hard pause (waits for input from you).
–
2-Sec Pause
— A 2-second pause after which dialing resumes. (For
more information, refer to
“Adding Pauses to Contacts
Numbers”
on page 41.)
Select the desired option.
5. When you’re finished changing the Contacts entry:
•
To save your changes, press .
•
To discard your changes, press . You are prompted to confirm
exiting without saving your changes. Press the
Ye s
soft key to
discard your changes.
Adding Pauses to Contacts Numbers
Calls to automated systems such as banking services often
require a password or account number. Instead of manually
entering these numbers, you can store them in a Contacts entry
with the phone number and with special characters called
pauses, up to a maximum of 32 digits.
•
2-Sec Pause
— Stops the calling sequence for two seconds, then
sends the remaining digits.
•
Wait
— Stops the calling sequence until the phone receives further
input.
Note:
You can enter multiple 2-Sec Pauses to extend the length of a pause.
For example, two consecutive 2-Sec Pauses cause a total pause time
of four seconds. Keep in mind that pauses count as digits towards the
32-digit maximum.
To add pauses to a Contacts entry number, do the following:
1. Find the Contacts entry associated with the number you
want to include one or more pauses. (For more
information, refer to “Finding a Contacts Entry” on
page 36.)
Page 45
Understanding Your Contacts 42
2.
Select and edit the desired number. (For more information,
refer to “Editing a Contacts Entry” on page 40.)
3. Press
Options
. The following pause options appear in the
display:
•2-Sec Pause
— A 2-second pause after which dialing resumes.
•Wait
— A hard pause (waits for input from you).
4. Select the pause option of your choice to add it to the
number sequence.
5. When you’re finished entering information, press to
store the number to Contacts.
Pause Dialing from Contacts
1. If you stored the number using 2-second pause(s), simply
find the Contacts entry, highlight the number, and press
. (For more information, refer to “Finding a Contacts
Entry” on page 36.)
2. If you stored the number using Wait(s), find and dial the
number from Contacts and wait for the appropriate prompt
from the dialed number.
3. Enter the appropriate response to the prompt.
Editing an Existing Email Address
1. Find the Contacts entry you want to edit. (For more
information, refer to “Finding a Contacts Entry” on
page 36.)
2. Highlight the desired Contacts entry, then press the
Edit
soft key.
The
Edit Contact
screen appears in the display.
3. Highlight the
Email
field.
4. Use the keypad to edit the Email address. (For more
information, refer to “Entering Text” on page 15.)
5. Press to save your changes.
Assigning a Ringtone to a Contacts Entry
When you assign a ringtone to a Contacts entry, the phone plays
the ringtone that you assigned to the entry when you receive a
call from that Contact instead of the ringtone currently assigned
to Voice Calls.
1. Find the Contacts entry you want to edit. (For more
information, refer to “Finding a Contacts Entry” on
page 36.)
2. Highlight the desired Contact, then press the
Edit
soft key.
Page 46
43
The
Edit Contact
screen appears in the display.
3. Highlight the
Ringtone
field, then press the
Set
soft key.
The
Contact Tone
menu appears in the display showing the
following options:
• My Ringtones
• My Sounds
4. Select the desired option. The
My Ringtones
or the
My
Sounds
file list appears in the display.
5. Select the ringtone or sound that you wish to assign to the
Contacts entry.
The
Edit Contact
screen re-appears in the display with the
name of the selected file in the Ringtone field.
6. Press to save the ringer assignment to the selected
Contacts entry.
Saving a Number After a Call
Once you finish a call, you can store the caller’s number to your
Contacts list.
Note:
If the call was incoming and Caller ID information was unavailable,
then the
Save
option is also unavailable.
1. Press to end your call. The call time, length of call,
phone number, and name of the party (if available) appear
in the display.
2. Press the
Save
soft key. The
Save
menu appears in the
display showing the following options:
•Create New
— Lets you create a new Contacts entry.
• Update Existing
— Lets you add the number you entered to an
existing Contacts entry.
3. Follow the instructions in the upcoming sections
depending on whether the number is a new entry or you
wish to add it to an existing entry.
Create a New Entry
1. At the
Save
menu, select
Create New
.
The
Create New
screen appears in the display showing the
following number type options:
2. Select the number type that matches your new entry.
3. Enter a name for the new entry. (For more information,
refer to “Entering Text” on page 15.)
Mobile
Home
Work
Pager
Fax
Page 47
Understanding Your Contacts 44
4.
Press . The new entry is saved to your Contacts list.
Add to an Existing Entry
1. At the
Save
menu, select
Update Existing
. The
Update
Existing
screen appears in the display showing your
Contacts list with the
Go To
field and the first Contacts
entry highlighted.
2. Find the Contacts entry to which you want to add the new
number. (For more information, refer to “Finding a
Contacts Entry” on page 36.)
3. Select the desired Contacts entry. The following number
type options appear in the display:
Number types that are already assigned a number show
the number instead of the number type label.
4. Select the desired unassigned number type. The Contacts
entry information appears in the display with the new
number posted in the appropriate number type field.
5. Press again to save your changes to the existing entry.
Speed Dial
A Contacts entry’s Speed Dial number corresponds to the number
keys you press to speed dial one of that entry’s numbers.
Example:
To speed dial the Contacts entry assigned to Speed Dial 5, press
and hold , (1-touch dialing).
To speed dial the Contacts entry assigned to Speed Dial 35, press
then press and hold , (2-touch dialing).
To speed dial the Contacts entry assigned to Speed Dial 235, press
, press , then press and hold , (3-touch dialing).
You can assign one or more Speed Dial numbers to a Contacts
entry during new entry creation or by editing an existing entry.
Assignment During Entry Creation
To assign a Speed Call number to a new Contacts entry number,
do the following:
1. Follow either of the New Contacts entry procedures (see
“Adding a New Contacts Entry” on page 39.) until you
enter a name for the entry.
2. After entering the Contacts entry name,
do not press
.
Instead, highlight a number field.
Mobile
Home
Work
Pager
Fax
Page 48
45
3.
Press the
Options
soft key. The following options appear in
the display:
• Set Speed Dial
— Assign a speed dial number.
• Set as default
— Set the number the phone will dial when
Contacts dialing, speed dialing, or voice dialing.
•Wait
— A hard pause (waits for input from you).
• 2-Sec Pause
— A 2-second pause after which dialing resumes.
(For more information, refer to
“Adding Pauses to Contacts
Numbers”
on page 41.)
Select
Set Speed Dial
. The
Speed Dial
screen appears in the
display.
4. Select an Unassigned Speed Dial number or enter an
Unassigned Speed Dial number in the
Go To
field using the
keypad.
Important!:
Do not enter Speed Call numbers 1, 211, 311, 411, 611, or 911.
These numbers are already assigned to Voicemail (001), to
Information (411), to Customer Care (611), and to emergency use
(911).
5. Press
SET (
). You are prompted to confirm your Speed
Dial number assignment.
6. Press the
Yes
soft key to save your Speed Dial assignment
and return to the
Add New Entry
screen.
Note:
Press the No soft key to discard the assignment and return to the
Speed Dial
screen.
7. Press to save your changes.
Assignment to an Existing Entry
1. Find the Contacts entry you want to edit. (For more
information, refer to “Finding a Contacts Entry” on
page 36.)
2. Highlight the desired entry.
3. Press
Edit
. The
Edit Contact
screen appears in the display.
4. Highlight the number field you wish to assign a Speed Dial
number.
5. Do steps 3 through 7 of “Assignment During Entry
Creation” on page 44.
Changing a Speed Dial Location
1. Find the Contacts entry you want to edit. (For more
information, refer to “Finding a Contacts Entry” on
page 36.)
2. Highlight the desired entry.
3. Press
Edit
. The
Edit Contact
screen appears in the display.
Page 49
Understanding Your Contacts 46
4.
Highlight the number field marked by the Speed Dial icon
().
5. Press the
Options
soft key. The following options appear in
the display:
• Remove speed dial
— Unassign the current speed dial number.
•Set as default
— Set the number the phone will dial when
Contacts dialing, speed dialing, or voice dialing.
•Wait
— A hard pause (waits for input from you).
•2-Sec Pause
— A 2-second pause after which dialing resumes.
(For more information, refer to
“Adding Pauses to Contacts
Numbers”
on page 41.)
6. Select
Remove Speed Dial
. “
Remove speed dial?
” pops up
in the display to confirm your desire to remove the entry.
7. Press the
Yes
soft key to remove the Speed Dial
assignment. “
Speed Dial Removed
” pops up in the display,
and you are returned to the
Edit Contact
screen.
8. Do steps 4 through 7 of “Assignment During Entry
Creation” on page 44.
Contacts Groups
Contact Groups let you easily send messages to multiple,
selected Contacts. You can also use Groups to find Contact
entries and to add/remove Contacts names in a Group or to
create or rename a Group.
Add Contacts Entry to a Group
Using Add New/Edit Contact Option
To add a Contact to a Group using either the Add New Contact
option or the Edit Contact option, do the following:
1. Create a Contacts entry (see “Adding a New Contacts
Entry” on page 39) or find a Contacts entry (see “Finding a
Contacts Entry” on page 36) that you want to add to a
Group.
2. Highlight the
Group
field, then press the
Set
soft key.
The
Select Group
screen appears in the display showing
Groups similar to the following:
• No Groups
•Business
• Colleague
•Family
• Friends
3. Select the Group to which you want to assign the selected
Contact.
Page 50
47
You are returned to the
Add New Entry/Edit Contact
screen
and the selected Group name populates the
Group
field.
4. Press to save your changes.
Using Group Add Option
The Add option lets you add one or more existing Contacts to a
Group.
1. In standby mode, press
Menu
( ), then select
Contacts
➔
Group
.
The
Group List
screen appears in the display showing
Groups similar to the following:
• No Groups
•Business
• Colleague
• Family
• Friends
2. Highlight a Group, then press the
Options
soft key. The
following options popup in the display:
• Send Txt Msg
— Send a text message to the selected Group.
• Send Pic Msg
— Send a picture message to the selected Group.
•Rename
— Change the name of the selected Group.
•Erase
— Delete the selected Group, and send the member
Contacts back to No Groups.
•Add
— Add one or more Contacts to the selected Group.
3. Select
Add
. The
Add Contacts
screen appears in the display
showing a list of Contacts entries.
4. Do one of the following:
•
Use the Navigation key to highlight an entry you want to add to the
group, then press
MARK
( ). A check mark appears in the entry’s
check box.
Repeat as needed to check all the desired Contacts.
Note:
You are limited to a maximum of 10 Contacts per Group.
•
Press the
Mark All
soft key.
Note:
To unmark a marked Contact, highlight the Contact and press
MARK
to
clear the check mark.
5. When you have marked the Contacts you want to add to
the group, press
Done
. “
Contact added to group
” appears in
the display, followed by the selected Group list including
the added Contacts.
Remove Contacts Entry from a Group
1. In standby mode, press
Menu
( ), then select
Contacts
➔
Group
. The
Group List
screen appears in the display.
Page 51
Understanding Your Contacts 48
2.
Highlight the Group (other than No Groups) from which you
want to remove a Contact, then press
VIEW
( ).
A list of the Contacts assigned to the selected Group
appears in the display.
3. Highlight the Contact you wish to remove.
4. Press the
Remove
soft key. You are prompted to confirm
the removal of the selected Contact.
5. To remove the selected Contact from this Group and return
it to No Groups, press the
Yes
soft key.
To keep the selected Contact in this Group, press the No
soft key.
Rename a Group
The Rename option lets you change the name any of the Groups,
except No Groups.
1. In standby mode, press
Menu
( ), then select
Contacts
➔
Group
. The
Group List
screen appears in the display.
2. Highlight the Group name other than No Groups that you
wish to change, then press
Options
➔
Rename
.
The
Rename Group
screen appears in the display.
3. Enter changes to the group name using the keypad. (For
more information, refer to “Entering Text” on page 15.)
4. When you have completed your changes to the Group
name, press
SAVE
( ).
“
Group Renamed
” appears in the display followed by the
Group List
screen showing your renamed Group.
Add a New Group
The New option lets you add Groups.
1. In standby mode, press
Menu
( ), then select
Contacts
➔
Group
. The
Group List
screen appears in the display.
2. Press the
New
soft key. The
New Group
screen appears in
the display.
3. Enter a new group name using the keypad. (For more
information, refer to “Entering Text” on page 15.)
4. When you have completed entering the new Group name,
press
SAVE
( ). “
Group Saved
” appears in the display
followed by the
Group List
screen showing your new
Group.
Page 52
49
Erase a Group
The
Erase
option lets you delete a Group, thus freeing you to
reassign the Contacts formerly in the Group.
1. In standby mode, press
Menu
( ), then select
Contacts
➔
Group
. The
Group List
screen appears in the display.
2. Highlight the Group that you wish to delete, press the
Options
soft key, then select
Erase
.
You are prompted to confirm the Group erasure.
3. To confirm erasure of the Group, press the
Yes
soft key. To
retain the Group, press the No soft key.
Deleting a Contacts Entry
1. Find the Contacts entry you want to delete. (For more
information, refer to “Finding a Contacts Entry” on
page 36.)
2. Highlight the desired entry, press the
Options
soft key, then
select
Erase
. The phone prompts you to confirm the
erasure.
3. To confirm erasure of the selected Contact, press the
Yes
soft key. To retain the Contact, press the No soft key.
Deleting All Contacts Entries
When transferring or disposing of your phone, deleting all of your
Contacts will help protect your privacy. To delete all entries from
your Contacts, you select the Phone-Security option Erase All
Entries.
Note:
For more information, refer to “Erase All Entries” on page 121.
Memory Info
The Memory Info menu option lets you view the amount of
memory you have used to store Contacts entries, as well as the
memory remaining to store more Contacts entries.
䊳
In standby mode, press
Menu
( ), then select
Contacts
➔
Memory Info
.
The
Memory Info Contacts
screen appears in the display
showing the
Tot al
amount of memory in your phone, the
amount of memory
Used
to store Contacts entries, and the
remaining (
Free
) for Contacts entries.
Page 53
Messaging 50
Section 6: Messaging
This section explains how to send or receive different types of
messages. This section also describes the features and
functionality associated with messaging.
Types of Messages
Your phone is able to send and receive Text and Picture
messages to compatible phones and devices. Text messages can
be up to 160 characters in length.
Note:
Available memory is shared between all messages. You can store up to
100 messages. However, the exact number is dependent upon
message length.
Create and Send Text
Messages
1. In standby mode, press
the
Msgs
soft key, then
select
Send Message
➔
Tex t M e s s a ge
. The
Create Txt Msg
screen
appears in the display showing the
To:
list.
Tip:
To launch the
Create Txt Msg
screen using a voice command — In
standby mode, press and hold until the phone prompts, “
Say a
command.
” Say “
Send Text
” into the microphone. You are then prompted
to say a Contact name or a number for the first recipient of the
message.
2. Enter the phone number
or Email address of the
recipient, then press
. The
Text :
field
appears in the display.
3. Enter the text content of
your message using the
keypad. (For more information, refer to “Entering Text” on
page 15.)
4. Press the
Options
soft key to complete the message text
and set message send options. The following options
appear in the display:
• Edit Send To
— Edit the recipient’s number or email address.
• Add Quick Text
— Insert pre-composed text in your message.
Page 54
51
• Save As Draft
— Save the message to your Draft folder.
• Priority Level
— Choose
Urgent
or
Normal
.
•Validity Period
— Enter the Date when this message will cease to
be valid, then use the Left and Right navigation keys to choose the
Time.
• Deferred Delivery
— Select the Date and Time you want this
message to be delivered.
• Enh. Delivery Ack
— Choose On or
Off
— Requests confirmation
when your message is received.
• Add To Contacts
— Save the recipient’s number or Email address
as a Contacts list entry.
5. Once you’re finished entering your message, press
SEND
().
Receive Text Messages
When you receive a message
in standby mode, the ringer
sounds (unless turned off) and
New Message
appears in the
display along with the closed
envelope icon ( ). The date
and time of the message also
appear in the display along
with the following options:
•
View Now
— Opens the message, where you have the option to
Forward, Reply With Copy, Save Quick Text, Lock, Add To Contacts,
Message Info, or Extract.
•
View Later
— Saves the message to your Inbox, where you can view
it later, then returns your phone to standby mode.
Select your choice.
Receive Messages While in a Call
When you receive a message while in a call, New Message
appears in the display along with the closed envelope icon
( ). The date and time of the message also appear in the
display along with the following options:
•
View Now
— Opens the message, where you have the option to
Forward, Reply With Copy, Save Quick Text, Lock, Add To Contacts,
Message Info, or Extract.
•
View Later
— Saves the message to your Inbox, where you can view
it later, and returns your phone to call mode.
Select the preferred option.
Page 55
Messaging 52
View a Text Message Now
1. After you select the
View Now
option, the
new text message
appears in the display
(shown in Chat View).
2. While viewing your
message press the
Options
soft key. The following options
appear in the display:
• View Last Message
— View the last message exchanged with
this number or Contact.
• Add To Contacts
— Save the sender’s number to your Contacts.
3. Select an option to perform its function.
Note:
For more information on received message options, see “Inbox” on
page 58.
View a Text Message Later
1. In standby mode, press
the
Msgs
soft key, then
select
Inbox
. The
Inbox
screen appears in the
display.
2. Select the new
message. The new text
message appears in the display (shown in Normal View).
3. While viewing your message press the
Options
soft key.
The following options appear in the display:
•Forward
— Send a copy of this message to another recipient.
•Reply With Copy
— Compose and send a reply message to the
originator of the received message and include a copy of the
original message.
•Save Quick Text
— Save the text in this message as a new Quick
Te xt .
•Lock
/
Unlock
— Block/permit erasure of the highlighted
message.
• Add To Contacts
— Save the sender’s number to your Contacts.
• Message Info
— Shows message delivery status, addressee, size,
and so on.
Page 56
53
•Extract
— Lets you call the originator of the highlighted message.
4. Select an option to perform its function.
Send Picture Messages in Camera Mode
Picture messages can be sent to recipients with compatible
phones or devices. You can even accompany a Picture message
with a voice memo or preloaded sound.
Tip:
You can send a Picture message to up to ten recipients. Enter each
recipient’s address or phone number in a separate
Send to
field of the
Picture message composer.
1. In standby mode, press and hold the Camera key ( ).
The camera viewfinder screen appears in the display.
2. Using the display as a viewfinder, when the image that you
wish to send appears in the display, press
TAKE
( ) to
take a picture.
Note:
For more information about using the camera feature in your phone,
see “Camera” on page 73.
3. Press
Send
( ) to save the picture and begin the picture
message delivery process.
The
Create Pic Msg
screen then appears in
the display with the
Send To:
list highlighted.
4. Enter the phone number
or Email address of the
recipient of the Picture
message, then press .
Tip:
Press the
Add
soft key to display a pop-up menu containing:
Contacts
,
Groups
, and
Recent Calls
, and
Online Album
. These options allow you to
find and add recipients to the
Send To:
list.
5. The
Subject:
field
appears in the display.
Enter a subject for the
Picture message using
the keypad. (For more
information, refer to
“Entering Text” on
page 15.)
Page 57
Messaging 54
6.
Press the Down navigation key until the
Tex t:
field is
highlighted, then enter the message text using the keypad.
(For more information, refer to “Entering Text” on
page 15.)
7. Your new picture appears in the
Picture
field.
8. If you wish to insert a sound into your Picture message,
highlight the
Sound:
field and do the following; otherwise,
proceed to step 10.
•
Press the
Sounds
soft key. The
My Sounds
screen appears in the
display showing the following options:
–
Record New
— Record a new memo to insert into the message.
Note:
You can record and insert a voice memo of up to 60 seconds in length,
if you record first before attaching a picture. If a picture is attached
before recording, the size of the voice memo is limited to the amount
of remaining memory.
–
Audio files list
— Select from the list of previously recorded voice
memos and preloaded audio files on your phone.
Select an option, a sound file, and insert the sound into your message.
To exit the pop-up menu without inserting a sound, press .
9. Press the
Options
soft key to complete the message text
and set message send options.
The following options appear in the display:
•
Preview
— View the picture as the recipient will see it.
•
Add Quick Text
— Add pre-composed text to your message.
•
Save As Draft
— Save the message to your Draft folder.
•
Priority Level
— Choose
Urgent, Normal
, or
Low
.
•
Validity Period
— Enter the
Date
when this message will cease to
be valid, then use the Left and Right navigation keys to choose the
Time
.
•Deferred Deliv.
— Lets you specify a Date and Time when the
message will be delivered.
•
Delivery Ack
— Choose On or
Off
— Requests confirmation when
your message is received.
•
Remove Pic
— Remove the picture from your message.
•
Remove Sound
— Remove the sound file from your message.
•
Add To Contacts
— Save the recipient’s number or Email address
as a Contacts list entry.
Select the desired option.
10. Press
SEND
( ) to send the message. “
Pic Msg Sending
”
appears in the display and a progress bar indicates the
send status.
Send Picture Messages in Standby Mode
Send Picture messages to recipients with a compatible phone or
other device, and accompany the Picture message with a voice
memo, ringtone, or downloaded melody.
Page 58
55
Tip:
You can send a Picture message to up to ten recipients. Enter each
recipient’s address or phone number in a separate
Send To
field of the
Picture message composer.
1. In standby mode, press
the
Msgs
soft key, then
select
Send Message
➔
Picture Message
.
The
Create Pic Msg
screen then appears in
the display showing the
To:
list.
Tip:
To launch the
Create Pic Msg
screen using a voice command — In
standby mode, press and hold until the phone prompts, “
Say a
command.
” Say “
Send Picture
” into the microphone. You are then
prompted to say a Contact name or a number for the first recipient of the
message.
2. Enter the phone number or Email address of the recipient
using the keypad, then press .
Tip:
Press the
Add
soft key to display a pop-up menu containing:
Contacts
,
Groups, Recent Calls
, and
Online Album
. These options allow you to find
and add recipients to the
Send To:
list.
3. The
Subject:
field
appears in the display.
Enter a subject for the
Picture message using
the keypad. (For more
information, refer to
“Entering Text” on
page 15.)
4. Press the Down navigation key until the
Text :
field is
highlighted, then enter the message text using the keypad.
(For more information, refer to “Entering Text” on
page 15.)
5. Press the Down navigation key until the
Picture:
field is
highlighted, then press the
Picture
soft key. A photo gallery
of thumbnail images appears in the display.
6. Highlight a picture to be added to your message, then do
the following:
•
If you want, press the
View
soft key to expand the highlighted
picture to full-screen size.
•
If you want to include a new picture, press the
Camera
soft key.
Page 59
Messaging 56
Note:
For more information about using the camera feature in your phone,
see “Camera” on page 73.
•
Press to add the highlighted picture to your message.
You are returned to the
Create Pic Msg
screen with the
selected picture in the
Picture:
field.
7. If you wish to insert a sound into your Picture message,
use the Down navigation key to highlight the Sound: field
and do the following; otherwise, proceed to step 8.
•
Press the
Sounds
soft key. The
My Sounds
screen appears in the
display showing the following options:
–
Record New
— Record a new memo to insert into the message.
Note:
You can record and insert a voice memo of up to 60 seconds in length,
if you record first before attaching a picture. If a picture is attached
before recording, the size of the voice memo is limited to the amount
of remaining memory.
–
Audio files list
— Select from the list of previously recorded voice
memos and preloaded audio files on your phone.
Select an option, a sound file, and insert the sound into your message.
To exit the pop-up menu without inserting a sound, press .
8. Press the Options soft key to complete the message text
and set message send options. The following options
appear in the display:
•Preview
— View the picture as the recipient will see it.
• Add Quick Text
— Add pre-composed text to your message.
•Save As Draft
— Save the message to your Draft folder.
•
Priority Level
— Choose
Urgent, Normal
, or
Low
.
• Validity Period
— Enter the
Date
when this message will cease to
be valid, then use the Left and Right navigation keys to choose the
Time
.
•Deferred Deliv.
— Lets you specify a Date and Time when the
message will be delivered.
• Delivery Ack
— Choose On or
Off
— Requests confirmation
when your message is received.
• Remove Pic
— Remove the picture from your message.
• Remove Sound
— Remove the sound file from your message.
• Add To Contacts
— Save the recipient’s number or Email address
as a Contacts list entry.
Select an option to invoke its function.
9. Press to send the message. “
Pic Msg Sending
”
appears in the display and a progress bar indicates the
send status.
Page 60
57
Receive Picture Messages
When you receive a Picture
Message in standby mode, the
ringer sounds (unless turned
off) and
New Message
appears
in the display along with the
closed envelope icon ( ).
The date and time of the
message also appear in the
display along with the following options:
•
View Now
— Retrieves and opens the message, where you have the
option to Play Again, Forward, Erase, Save Pic, Save Sound, Save
Quick Text, Lock, Add to Contacts, Message Info, or Extract.
•
View Later
— Saves the message to your inbox, where you can view
it later, then returns your phone to standby mode.
•
Reject
— Discards the message without viewing it.
Select the desired option.
View a Picture Message Later
1. In standby mode,
Msgs
soft key, then select
Inbox
. The
Inbox appears in the display.
2. If the new picture message is not highlighted, select the
new message. “
Connecting
” appears in the display
followed by “
Receiving Message
” and a progress bar
indicating that the message is downloading to your phone.
3. Once a Picture message has been downloaded to your
phone, the new Picture message appears in the display. If
the message includes a sound file, the phone begins
playing it.
Note:
For more information on viewing and managing received picture
messages, see “Inbox” on page 58.
View a Picture Message Now
1. After you select the
View Now
option, “
Connecting
”
appears in the display followed by “
Receiving Message
”
and a progress bar indicating that the message is
downloading to your phone.
Page 61
Messaging 58
2.
After the Picture
message has
downloaded, an alert
sounds, and the new
Picture message
appears in the display.
If the message includes
a sound file, the phone begins playing it.
3. While viewing your message press the
Options
soft key.
The following options appear in the display:
•Play Again
— Play the sound file included in the picture message
again.
•Forward
— Send a copy of this message to another recipient.
•Erase
— Delete this message from the Inbox folder.
•Save Pic
— Save the picture included in this message to the My
Images folder.
• Save Sound
— Save the sound file included in this message to the
My Sounds folder.
•Save Quick Text
— Save the text in this message as a new Quick
Te xt .
•Lock
/
Unlock
— Block/permit erasure of the highlighted
message.
• Add To Contacts
— Save the sender’s number to your Contacts.
• Message Info
— Shows message delivery status, addressee, size,
and so on.
•Extract
— Calls the sender of the received message.
4. Select an option to invoke its function.
Note:
For more information on received picture message options, see
“Inbox” on page 58.
Message Boxes
Your phone stores messages in any one of five message boxes.
The subsections that follow describe each message box in detail.
Inbox
Received messages of all types (except Voicemail) are stored in
the Inbox.
1. In standby mode, press the
Msgs
soft key, then select
Inbox
. A list of incoming messages appears in the display.
Tip:
While in a call, press
Options
, then select
Message
to open the
Messages
menu.
2. Select the message that you wish to view. The contents of
the highlighted message appear in the display.
Page 62
59
3.
While viewing your message press the
Options
soft key.
The following options appear in the display:
•Play Again
— Pic Msg — Replay the sound file included in this
message.
•Forward
— Send a copy of this message to another recipient.
• Reply With Copy
— Compose and send a reply message to the
originator of the received message and include a copy of the
original message.
•Erase
— Pic Msg — Delete the picture from this message.
•Save Quick Text
— Save the text in this message as a new Quick
Tex t.
•Save Pic
— Pic Msg — Save the picture in this message into the
My Images folder.
• Save Sound
— Pic Msg — Save the sound file included in this
message to the My Sounds folder.
•Lock
/
Unlock
— Block/permit erasure of the highlighted
message.
• Add To Contacts
— Save the sender’s number to your Contacts.
•Message Info
— Shows message delivery status, addressee, size,
and so on.
•Extract
— Lets you call the sender of a received text message,
send a message to the sender of a received e-mail message, or call
any number included in the message.
4. Select an option to invoke its function.
Managing Inbox Messages
1. In standby mode, press the
Msgs
soft key, then select
Inbox
. A list of incoming messages appears in the display.
2. Highlight a message in the list.
3. Press
Erase
to remove the highlighted message from the
Inbox.
4. To access other options, press the
Options
soft key. The
following options appear in the display:
•Reply
— Compose and send a reply message to the originator of
the received message.
• Reply With Copy
— Compose and send a reply message to the
originator of the received message and include a copy of the
original message.
•Forward
— Send a copy of this message to another recipient.
•Lock
/
Unlock
— Block/permit erasure of the highlighted
message.
• Add To Contacts
— Save the sender’s number to your Contacts.
• Erase Inbox
— Delete all unlocked messages from the Inbox.
•Message Info
— Shows message delivery status, addressee, size,
and so on.
5. Select an option to perform its function.
Page 63
Messaging 60
Outbox
Your phone stores messages in the Outbox, regardless of
whether the message was successfully transmitted. Verify if and
when a message or Email was successfully received by enabling
the Delivery Ack feature.
Review Messages in the Outbox
1. In standby mode, press the
Msgs
soft key, then select
Outbox
. Your list of sent messages appear in the display.
2. Highlight a message that you wish to review, then press
OPEN
( ).
3. While viewing your message, press the
Options
soft key.
The following options appear in the display:
•Play Again
— Picture message only — Plays the sound file
included with the message.
•Forward
— Send the highlighted message to another recipient.
•Erase
— Picture message only — Deletes this message from the
Outbox folder.
•Save Quick Text
— Save the message text as Quick Text for
insertion into other messages.
•Lock
/
Unlock
— Block/permit erasure of the highlighted
message.
• Add To Contacts
— Save the recipient’s number to your Contacts.
• Message Info
— Shows message delivery status, addressee, size,
and so on.
•Extract
— Calls recipient of this message.
4. Select an option to perform its function.
Messages and Lock Mode
Your phone can still receive messages while in Lock Mode. The
time and date of the message appear in the display, but you
cannot access the message until you enter the lock code.
Managing Outbox Messages
1. In standby mode, press the
Msgs
soft key, then select
Outbox
. Your list of sent messages appear in the display.
2. Highlight a message, then press
Erase
to remove the
highlighted message from the Outbox.
3. Press the
Options
soft key. The following options appear in
the display:
•Forward
— Send the highlighted message to another recipient.
• Resend
— Re-send the highlighted message to the original
recipient.
•Lock
/
Unlock
— Block/permit erasure of the highlighted
message.
• Add To Contacts
— Save the recipient’s number to your Contacts.
•Erase Outbox
— Delete all unlocked messages from the Outbox.
Page 64
61
•Message Info
— Shows message delivery status, addressee, size,
and so on.
4. Select an option to perform its function.
Draft Box
Messages in the Draft Box are those that have been composed
but never sent. You can return to the Draft Box at any time to
view, edit, or send a draft message.
Create a Draft Message
1. In standby mode, press the
Msgs
soft key, then select
Send
Message
➔
Text Me s sa ge
. The
Create Text Msg
screen
appears in the display showing the
To:
list.
2. Enter the phone Number or Email address of a recipient,
then press .
3. Compose your message using the keypad, then press the
Options
soft key and select
Save As Draft
. A confirmation
message appears in the display and your message is
saved to the Drafts box.
View and Edit Draft Text Messages
1. In standby mode, press the
Msgs
soft key, then select
Drafts
. A list of any draft messages that you’ve saved
appears in the display.
2. Highlight a text message that you wish to view or edit, then
press
EDIT
( ). The message text edit screen appears in
the display.
3. Enter or change the recipient’s number and/or Email
address and the message text using the keypad. (For more
information, refer to “Entering Text” on page 15.)
4. Press the
Options
soft key to complete the message text
and set message send options. The following options
appear in the display:
• Edit Send To
— Change, add, or remove recipients from this
message.
• Add Quick Text
— Insert pre-composed text into your message
text.
• Save As Draft
— Save the message to your Drafts box.
• Priority Level
— Choose
Urgent
or
Normal
.
• Validity Period
— Enter the Date when this message will cease to
be valid, then use the Left and Right navigation keys to choose the
Time.
• Deferred Deliv.
— Lets you specify a Date and Time when the
message will be delivered.
• Enh. Delivery Ack
— Choose On or
Off
— Requests confirmation
when your message is received.
Page 65
Messaging 62
• Add To Contacts
— Save the recipient’s number or Email address
to your Contacts.
5. Select an option to perform its function.
6. When you have completed composing your message,
press
SEND
( ).
Managing Draft Messages
1. In standby mode, press the
Msgs
soft key, then select
Drafts
. A list of any draft messages that you’ve composed
appears in the display.
2. Highlight a message.
3. To remove the highlighted message from the Drafts box,
press the
Erase
soft key. You are prompted to confirm
erasure of the highlighted draft message.
•
To erase this draft message, press the
Yes
soft key.
•
To keep this draft message in your Drafts box, press the No soft
key.
4. For other options, press the
Options
soft key. The following
options appear in the display:
•Send
— Send the highlighted message to the original recipient, if
the recipient’s number and/or Email address is included with the
draft message.
•Lock
/
Unlock
— Block/permit erasure of the highlighted
message.
• Add To Contacts
— Save the recipient’s number and/or Email
address to your Contacts.
•Save Quick Text
— Save the message text as Quick Text for
insertion into other messages.
• Erase Drafts
— Delete all unlocked draft messages.
5. Select an option to perform its function.
Voicemail
Messages in your voice mailbox are logged in the Voicemail box
of the Messages menu. Open the Voicemail box to view the
Callback # (if available), Urgency, and other details of the
Voicemail message.
Listen to Voicemail Now
Once you’ve received a new voicemail message, you have the
option to either:
•
Listen Now
— Calls your voice mailbox and allows you to listen to
your messages.
•
Listen Later
— Returns you to standby mode where you can later
choose to call your mailbox and review your messages.
Select an option to perform its function.
Page 66
63
Listen to Voicemail Later
If you choose to review your voicemail messages at a later time:
1. In standby mode, press the
Msgs
soft key, then select
Voicemail
. The
Voicemail
screen appears in the display,
showing the number of new voicemail messages received
and the date and time the latest message was received.
2. Press or to call your voice mailbox and listen to
the message.
Note:
You can also press and hold to dial your voice mailbox.
Erase Messages
Using Erase Messages, you can erase all of the messages in
each of your boxes from one convenient location.
Note:
This function erases all messages in a selected box. To delete a single
message, open the box from the
Messages
menu, highlight a message,
open the message if you want, then press
Erase
to delete it.
1. In standby mode, press the
Msgs
soft key, then select
Erase Messages
.
The following options appear in the display:
• Inbox
— Deletes all unlocked messages stored in the Inbox.
• Outbox
— Deletes all unlocked messages stored in the Outbox.
• Drafts
— Deletes all unlocked messages stored in the Drafts box.
• All Messages
— Deletes all unlocked messages stored in all of the
message boxes, except Voicemail.
2. Select the messages that you wish to delete. You’re
prompted to confirm the erasure of all messages in the
selected box or in all boxes.
3. To delete the messages, press the
Yes
soft key. To cancel
deleting the messages, press the No soft key.
Message Settings
Use the
Msg Settings
sub-menus to define general settings and
text message settings.
General Message Settings
1. In standby mode, press the
Msgs
soft key, then press
Msg
Settings
➔
General
.
The following options appear in the display:
•Auto Save
— Choose whether your messages are saved
automatically when you exit them (On,
Off, Prompt
).
• Auto Erase
— Choose to receive (On) or not receive (
Off
) a
warning message when you delete a message.
•Quick Text
— Edit your pre-composed messages, which can then
be inserted into new messages.
Page 67
Messaging 64
• Voicemail #
— Edit or view your Voicemail number.
• Entry Mode
— Choose the default method for entering text into
messages (
Abc, ABC, 123
).
• Callback #
— Choose whether to include a callback phone
number with your outgoing messages, and enter the number to be
included.
• Signature
— Choose whether to include a text signature in
outgoing message text, and enter the text to be included.
• Reminder
— Select whether and how often you will hear and/or
feel a reminder that you have received a message (
Once, Every 2
Minutes, Every 15 Minutes, Off
).
2. Select the desired option to enter the highlighted option’s
sub-menu.
Editing and Entering Quick Text
1. In standby mode, press the
Msgs
soft key, then select
Msg
Settings
➔
General
➔
Quick Text
. The
Quick Text
sub-menu
appears in the display.
2. To create a new Quick Text:
•
Press
New
.
Tip:
You can also create new Quick Text by viewing/editing an Outbox or
Drafts message and using the
Save Quick Text
option in the
Options
menu. (For more information, refer to “Review Messages in the Outbox”
on page 60.)
•
Enter/change the text content of your Quick Text using the keypad.
(For more information, refer to
“Entering Text”
on page 15.)
•
Once you’re finished entering your Quick Text, press OK. The Quick
Text menu appears in the display with your new Quick Text
highlighted.
3. To change a Quick Text:
•
Highlight a Quick Text you want to change, then press
EDIT
. (You
cannot change the pre-defined Quick Text included with your
phone.)
Note:
You cannot change or erase pre-loaded Quick Texts.
•
Enter/change the text content of your Quick Text using the keypad.
(For more information, refer to
“Entering Text”
on page 15.)
4. To erase a Quick Text:
•
Highlight a Quick Text you want to erase, then press
Erase
. You are
prompted to confirm erasure of the highlighted Quick Text.
•
To erase the highlighted Quick Text, press
Ye s
. To keep it, press No.
Text Message Settings
1. In standby mode, press the
Msgs
soft key, then select
Msg
Settings
➔
Text Message
. The following options appear in
the display:
•Auto View
— On/
Off
— With Auto View On, the full content of a
text message appears in the display as the messages is received.
Page 68
65
• Signature
— Create a signature, which can be included at the
bottom of outgoing message text.
•Auto Scroll
— On/
Off
— With Auto Scroll On, the full content of a
text message automatically rolls upward on the display, one screenfull at a time.
•Message View
— Set text messaging to display text messages
(outgoing and incoming) in a Chat-style view or to display incoming
text messages in a Normal, one at a time view.
2. Select the desired option to enter the highlighted option’s
sub-menu.
Picture Message Settings
1. In standby mode, press the
Msgs
soft key, then select
Msg
Settings
➔
Picture Message
. The following options appear
in the display.
• Auto Receive
— On/Off — With Auto Receive On, Picture
messages automatically download and display as they are
received. With Auto Receive
Off
, you are prompted to download
Picture messages.
• Signature
— Create a signature, which can be included at the
bottom of outgoing Picture message text.
2. Select the desired setting to enter the highlighted option’s
sub-menu.
Page 69
Music Player 66
Section 7: Music Player
This section explains how to use your Music Player to:
•
Play individual music files.
•
Create, play, and manage Playlists of music files.
This section also explains how to customize your Music Player to
suit your music playback preferences.
Finally, this section details how to load music files onto a
microSD™ Memory Card.
Using Your Music Player
You can use your Music Player to play music files that you have
transferred onto an optional microSD™ Memory Card using a
personal computer. (For information on loading music files on a
Memory Card, see “Loading Music Files” on page 69.)
You can launch the Music Player, then play music files with the
flip open or closed.
Your U440 Music Player can play music in the following Digital
Audio Formats:
Your Music Player can play music through the phone’s speaker,
through stereo headphones, through a stereo headset (such as
the optional Samsung AAEP404), or through a stereo Bluetooth
headset (such as the optional Samsung SBH700 or SBH500.) (For
information on available accessories, contact your Wireless
Carrier.)
Launching the Music Player
Note:
Before launching the Music Player, you must install a microSD™
Memory Card containing music files in your phone. (For more
information, refer to “Install a Memory Card” on page 8 and “Loading
Music Files” on page 69.)
1. In standby mode, press
Menu ( ), then select
Multimedia ➔ Music
Player. The Music
Player screen appears
in the display.
2. Press the
Library
soft
key. The Library menu appears in the display.
3. Select the
All
Library sub-menu. A list of music files saved
to your Memory Card appears in the display.
• Unprotected AAC and AAC+ • MP3 • WMA and WMA Pro
Page 70
67
Note:
For information on selecting and playing music files, refer to “Using the
Music Library” .
4. Select a music file and
press the
Play
soft key.
The Music Player screen
appears in the main
display.
Tip:
After launching the Music Player with the flip open, you can close the flip
without interrupting music playback.
Using the Music Library
1. In standby mode, press
Menu ( ), then select
Multimedia ➔ Music
Player. The Music
Player screen appears
in the display.
2. Press the
Library
soft key. The Library menu appears in the
display showing the following options:
Tip:
You can also access the
Library
menu from the Music Player screen by
pressing the
Library
soft key.
• Now Playing
— Music Player mode only — Indicates number of
music files currently playing. Select this option (or press the
Back
soft key) to return to the Music Player screen.
•All
— Lists all music files on the Memory Card and lets you play
individual music files or play multiple music files by creating a
temporary music playlist.
•Artists
— Lists artist names for music files on the Memory Card
and lets you play one or more music files by a selected artist.
• Albums
— Lists album titles for music files on the Memory Card
and lets you play one or more music files from a selected album.
• Playlists
— Lists any playlists you have saved and lets you create,
save, and manage playlists.
3. Select the preferred Library option. A list of music files,
artists, albums, or playlists appears in the display.
If a list of artists, albums, or playlists is showing, select the
preferred artist, album, or playlist. A list of music files
appears in the display.
Page 71
Music Player 68
4.
Highlight a music file, then:
•
To play the file, press the
Play
soft key.
•
To select the file for playing or other options, press
MARK
().
•
To select and apply any of the following options to the highlighted or
marked music file(s), depending the displayed music file list, press
the
Options
soft key:
–
Mark All
— Marks all listed music files for playing, removal, or
assignment of player settings.
–
Add Songs
— Lets you select music files in the All songs screen to
add to the
Now Playing
list.
–
Add to Playlist
— Adds this file to a selected Playlist.
–
Move to Another List
— Moves the selected song from the current
Playlist to another Playlist.
–
Remove From List
— Removes this file from the current list, but not
from the Memory Card.
–
Erase
— Removes this file from the Memory Card and from all lists.
–
Song Info
— Lists the title, artist, album, genres, copyright
information, time length, file size, and bit rate of the highlighted music
file.
Select the desired Option.
Music Player Controls
Flip Open
•
Volume key
:
–
To play a music file louder,
press the Volume key Up.
–
To play a music file softer,
press the Volume key Down.
•
Navigation key
:
–
To pause/resume playing a
music file, press .
–
To stop playing a music file, press the Down navigation key.
–
To skip play to an earlier music file in the selected list, press the Left
navigation key.
–
To skip play to a later music file in the selected list, press the Right
navigation key.
–
To return to the selected list and choose another music file to play,
press the Up navigation key.
•
Library
soft key — Returns you to the
Library
screen.
•
Options
soft key — Shows the following sub-menus and options:
–
Play Mode
— Lets you change the play mode from Normal, Shuffle,
Repeat One, Repeat All, or Shuffle Repeat All.
–
Add to Playlist
— Moves you to the
Playlists
menu to let you add a
selected music file to a playlist.
–
Remove From List
— Deletes a selected music file from the
Now
Playing
list or the current Playlist.
Page 72
69
–
Visual Supplements
— Lets you change the Music Player visualization
to Simple View, Equalizer, Lyrics, or Album Art.
–
Memory Info
— Displays the
Memory Usage
screen which lists
Memory Card usage and availability amounts.
–
Song Info
— Lists the title, artist, album, genre, copyright information,
time length, file size, and bit rate of the selected music file.
Select the desired option to launch the option or to access the submenu.
Loading Music Files
Using an Optional Card Reader
1. Before loading music files on a microSD™ Memory Card,
do the following:
•
With your phone powered off, insert the Memory Card into your
phone. (For more information, see
“Install a Memory Card”
on
page 8.)
•
Power your phone on.
•
When the Memory Card icon ( ) appears in the display, remove
the Memory Card from your phone. (For more information, see
“Remove a Memory Card”
on page 9.)
2. Insert the Memory Card into a compatible card reader.
Note:
Card readers vary. Follow the installation instructions included with
your card reader and personal computer.
3. Open the Memory Card reader drive and the “My_Music”
folder.
4. Drag or download music (MP3) files into the “My_Music”
folder.
5. Remove the Memory Card by following the removal
instructions for the Memory Card reader and for your
personal computer.
6. Insert the Memory Card into your phone. (For more
information, see “Listen to Voicemail” on page 8.)
Using an Optional Data Cable
To obtain a USB Data Cable compatible with your U440 phone,
contact your Wireless Carrier.
1. In standby mode,
connect the
smaller end of the
Data Cable to the
Power-Accessory
connector on your
U440 phone.
+
Page 73
Music Player 70
2.
Connect the larger (USB) end
of the Data Cable to your PC.
“
Connected To PC
” appears in
the U440 display. Your phone
appears as a removable disk
on your PC.
3. Copy or transfer your music
files to the
My_Music
folder on your phone.
4. Press the
Done
soft key on your phone. You are prompted
to confirm that you want to “
Exit USM mode?
”
5. Press the
Yes
soft key. Your phone returns to standby
mode.
6. Disconnect the Data Cable.
Playlists
Playing a Playlist
1. In standby mode, press
Menu ( ), then select
Multimedia ➔ Music
Player. The Music
Player screen appears
in the display.
2. Press the
Library
soft key, then select Playlists. The
Playlists
screen appears in the display.
3. Highlight the desired playlist and press the
Play
soft key.
The Music Player screen appears in the display and a
music file begins playing.
Adding a Playlist
To create a new playlist, do
the following:
1. In standby mode, press
Menu ( ), then select
Multimedia ➔ Music
Player. The Music
Page 74
71
Player screen appears in the display.
2. Press the
Library
soft key, then select Playlists. The
Playlists
screen appears in the display.
3. If there are no playlists,
press the
Add
soft key.
Otherwise, press the
Options
soft key and
select
Add New Playlist
.
The
Enter new name
field appears.
4. Enter a name for your new playlist. (For more information,
refer to “Entering Text” on page 15.) A list of your music
files appears in the display.
5. Highlight each file you
want to add to your new
playlist and press the
MARK
key ( ). A
check mark appears in
each selected file’s
check box.
6. When you have marked all the files you wish to add to your
playlist, press the
Done
soft key. The
Playlists
screen
appears in the display, showing your new playlist.
7. To play your new
playlist, press the
Play
soft key.
8. To see a list of the files
in your playlist, press
the
VIEW
key( ).
9. For the following
additional options, press the
Options
soft key:
• Add New Playlist
— Lets you create a new playlist.
• Rename Playlist
— Lets you change the name of this playlist.
• Erase Playlist
— Lets you remove this playlist from your phone.
Note:
Erasing a playlist does not erase the files listed in the playlist.
Page 75
Music Player 72
Managing Files in a Playlist
1. In standby mode, press
Menu ( ), then select
Multimedia ➔ Music
Player ➔ Playlists.
The
Playlists
screen
appears in the display.
2. Highlight the playlist
whose file list you wish to change, then press the
VIEW
key
( ). The selected Playlist's file list appears in the display.
3. To mark files for
change, highlight each
file and press the
MARK
key ( ). A check
mark appears in each
selected file’s check
box.
4. Press the
Options
soft key. The following options are
available:
•Mark All
— Marks all files in this playlist.
• Add Songs
— Lets you select songs and add them to this playlist.
• Move to Another List
— Lets you select move the marked files in
this list to another playlist.
• Remove From List
— Lets you erase marked files from this
playlist. (This option does not erase marked files from your Memory
Card.)
• Song Info
— Shows the Title, Artist name, Album name, Genre,
File Name, Encoding Format, Bit rate, File Size, and time and Date
for a marked or highlighted file in this playlist.
Page 76
73
Section 8: Camera
Use your U440 phone to take full color digital pictures, display
them on your phone’s vivid color display, and instantly share
them with family and friends. It’s fun, and as easy to use as a
traditional point-and-click camera. This section explains how you
can do the following:
•
Take pictures with your phone’s built-in digital camera.
•
Send your pictures to others in Picture messages.
•
Set the several options associated with the camera that help you take
crisp, clear pictures.
Taking Pictures
Taking pictures with the builtin camera is as simple as
launching the camera,
choosing a subject, pointing
the lens (located on the front
of your phone’s flip, near the
hinge), and pressing a button.
Taking Snap Shots (Single
Pictures)
To take a single picture using the current camera settings, do the
following:
1. In standby mode, press and hold the Camera key ( ) on
the right side of the phone. The message “
Please Wait...
”
appears in the display followed by a camera view finder
screen. (For more information, refer to “Camera Screen
Layout” on page 76.)
Note:
You can also activate the camera by pressing Menu ( ), then
selecting Multimedia ➔ Camera.
2. Using the display as a
viewfinder, point the
camera lens (on the
front of the flip, near the
hinge) at your subject.
3. When the image that
you wish to capture
appears in the display, press
TAKE
( ).
4. To save the picture to memory, press the
Save
soft key.
To erase the photo, press the
Erase
soft key.
Camera
Lens
Page 77
Camera 74
Tip:
You can change a number of the camera’s settings to suit particular
uses for your pictures. See “Camera Options” on page 77 for more
information.
Taking Multi Shot Pictures
When taking pictures of moving subjects or subjects you cannot
pose, such as children and pets, the camera’s Multi Shot mode
simplifies the process of taking multiple pictures in quick
succession. After taking Multi Shot pictures, the camera
automatically displays thumbnail views of the pictures you have
just taken so you can select the best picture(s) and discard the
rest.
1. In standby mode, press and hold the Camera key ( ) on
the right side of the phone. The message “
Please Wait...
”
appears in the display followed by a camera view finder
screen. Your phone is now in camera mode. (For more
information, refer to “Camera Screen Layout” on
page 76.)
Note:
You can also activate the camera by pressing Menu ( ), then
selecting Multimedia ➔ Camera.
2. Press the Options soft
key. The options menu
bar appears at the top
of the camera screen.
3. Highlight the Shot Type
icon ( , , ,
or ). The following
Shot Type options appear in the display:
•
Single Shot
— — Lets you take 1 photo at a time.
•
Series Shot
— — Lets you take a series of 3 or 5 photos.
•
Divided Shot
— — Lets you take a mosaic of 4 or 9
photos.
•
Frame Shot
— — Lets you select a colorful frame to
include around your photos.
4. Select
Series Shot
or
Divided Shot
.
•
When you select
Series Shot
, the following options appear in the
display:
–
Off
–
3 Auto
— Lets you take 3 photos automatically with one press of
TAK E
().
–
3 Manual
— Lets you take 3 photos in quick succession by pressing
TAK E
( ) for each photo.
Page 78
75
–
5 Auto
— Lets you take 5 photos automatically with one press of
TAK E
().
–
5 Manual
— Lets you take 5 photos in quick succession by pressing
TAK E
( ) for each photo.
•
When you select
Divided Shot
, the following options appear in the
display:
–
Off
–
4 Auto
— Lets you take 4 shots automatically that are combined into a
single, mosaic photo, all with one press of
TAK E
( ).
–
4 Manual
— Lets you take 4 shots in quick succession by pressing
TAK E
( ) for each shot, with all 4 shots being combined into a single,
mosaic photo.
–
9 Auto
— Lets you take 9 shots automatically that are combined into a
single, mosaic photo, all with one press of
TAK E
( ).
–
9 Manual
— Lets you take 9 shots in quick succession by pressing
TAK E
( ) for each shot, with all 9 shots being combined into a single,
mosaic photo.
5. Select the desired setting.
A Series Shot progress bar ( ) or
a Divided Shot icon ( ) (which acts as a progress bar
while pictures are being taken) appears in the display.
6. Using the display as a viewfinder, point the camera lens at
your subject.
7. When the image that you wish to capture appears in the
display, press
TAKE
( ). The camera takes one picture
(Manual) or multiple pictures in quick succession (Auto),
then the Series Shot Select to Save screen or the Divided
Shot mosaic photo screen appears in the display.
•Series Shot:
–
To save the pictures to
memory, press the
Done
soft key.
–
To discard the pictures,
press .
•
Divided Shot:
–
To save the picture to
memory, press the
Save
soft key.
–
To send the picture in a
picture message, press
Send
( ).
–
To discard the picture,
press the
Erase
soft key.
Page 79
Camera 76
Camera Screen Layout
When you activate your
phone’s camera, the top two
lines of the display are
reserved for camera icons
(when active). The center of
the display shows a viewfinder
image of the subject at which
the camera is pointed.
Camera Screen Soft Keys
The soft key labels on the bottom line of the display change to
the following:
•
My Images
— Pressing the Left soft key opens the
My Images
multimedia folder so you can view or manage your stored pictures.
(See
“My Images”
on page 82 for more information.)
•
TAKE
— Pressing takes a picture of the subject currently
appearing in the camera view finder screen.
•
Options
— Pressing the Right soft key opens a menu bar of camera
options and settings.
Camera Screen Icons
Camera — Indicates the camera is active.
Single Shot in use — Takes one photo each time you
press
TAKE
().
Series Shot in use — Takes a series
( ) of photos automatically or
manually when you press
TAKE
( ). The number of
photos taken depends upon the Series Shot setting.
Divided Shot in use — Takes multiple shots
automatically ( ) or manually ( ) when you press
TAKE
( ). The number of shots taken depends upon the
Divided Shot setting. All shots are combined into a single,
mosaic photo.
Frame Shot in use — Takes one photo each time you
press
TAKE
( ). Each photo is surrounded by a selected,
colorful frame.
Camera Resolution — Indicates camera’s current
resolution setting. (You can change the camera resolution
setting. See “Camera Options” on page 77 for more
information.)
Night Shot — Lets you take photos in low light.
Self Timer in use — Delays the camera shutter for 2,
5, or 10 seconds after you press .
171
171
Page 80
77
Quality — Indicates camera’s picture quality setting. (You
can change the picture quality setting. For more
information, refer to “Quality” on page 79.)
White Balance — Indicates camera’s white balance
setting. (You can change the camera white balance
setting. For more information, refer to “White Balance”
on page 80.)
Photo Limit — Indicates the available number of photos
you can take. (Depending on the camera resolution
setting.)
Phone Memory
— Indicates photos will be stored in the
phone’s memory.
Card Memory
— Indicates photos will be stored on a
microSD Memory Card.
Zoom — Enlarges the image from X0 to X8 before you
take a picture. (Depending on the camera resolution
setting. For more information, refer to “Zoom” on
page 82.)
Brightness — Brightens or darkens the image from -4
to +4 before you take a picture. (For more information,
refer to “Brightness” on page 82.)
Picture Options
After you take a picture, the following options are available (if
Auto Save
is set to
Off
):
•
Save the picture
by pressing the
Save
soft key.
Pictures are stored in the
My Images
folder, which is part of the
phone’s memory and/or card memory devoted to storing, browsing,
and viewing saved pictures. (See
“My Images”
on page 82 for more
information.)
•
Send the picture
to someone else by pressing
Send
( ).
For a detailed procedure, see
“Send Picture Messages in Camera
Mode”
on page 53.
•
Discard the picture
by pressing the
Erase
soft key.
If
Auto Save
is set to On, these options are not available. After
pressing
TAKE
( ), the picture(s) is (are) automatically saved,
and you are returned to the camera screen.
Camera Options
The Camera Options let you temporarily adjust default camera
settings to suit available lighting, the subject of the photo, or the
purpose of the photo, for the current camera session. When you
exit the camera, your Camera Options values revert to their
default values.
To access Camera Options, do the following:
1. In camera mode, press the Options soft key. The Camera
Page 81
Camera 78
Options menu appears in the display, containing the
following sub-menus:
2. Select a sub-menu, then select a preferred value.
The following sub-sections describe camera options and
available values.
Shot Type
Shot Type lets you take multiple photos or shots in succession at
the touch of a key and/or add colorful frames to your photos.
1. In camera mode, press the Options soft key, then highlight
the Shot Type icon ( / / / ). The
following values appear in the camera screen:
•
Single Shot
— Lets you take 1 photo at a time.
•
Series Shot
— Lets you take a series of 3 or 5 photos (
3 Auto
/
3 Manual / 5 Auto
/
5 Manual
).
•
Divided Shot
— Lets you take a mosaic photo of 4 or 9 shots
(
4Auto
/
4 Manual
/
9 Auto
/
9 Manual
).
•
Frame Shot
— Lets you select a colorful frame to include around
your photos (use the Left and Right navigation keys to preview
available frames).
Note:
The
None
frame is a blank frame.
2. Select the desired Shot Type.
Resolution
Resolution lets you change the clarity (in pixels) and size (in
bytes) of your pictures.
1. In camera mode, press the Options soft key, then highlight
the Resolution setting. The following values appear in the
camera screen:
•
1280 X 960
(pixels)
•
640 X 480
(pixels)
Shot Type (also , , or )
Resolution
Night Shot (also )
Self Timer (also , , or )
Quality (also , or )
White Balance (also , , , or )
Color Effect
Settings
Page 82
79
•
320 X 240
(pixels)
•
176 X 144
(pixels)
2. Select the desired Resolution value.
Note:
The Resolution setting affects zoom capabilities. When Resolution is
set to 1280 X 960, zoom is not available. When Resolution is set to any
value lower than 1280 X 960, zoom settings 1 – 9 are available.
Night Shot
Night Shot lets you take pictures in low light conditions.
1. In camera mode, press the Options soft key, then highlight
or . The following options appear in the display:
•Off
•On
2. Select the Night Shot setting of your choice.
Self Timer
Self Timer lets you delay taking a picture long enough to let you
join others in a picture.
1. In camera mode, press the Options soft key, then highlight
/ / / .
The following values appear in the camera screen:
•
Off
•
2 Sec.
•
5 Sec.
•
10 Sec.
2. Select a Self Timer value.
Note:
If you select 2 Sec., 5 sec., or 10 sec., a Self Timer icon (such as,
) appears in the camera screen in the display.
The next time you press , the countdown Self Timer
indicates the time remaining before the camera takes the
picture. The phone reads the countdown timer value to you
beginning with two or three and continuing to zero, when
the picture is taken.
Tip:
To stop the countdown timer without resetting it, press .
Quality
You can affect how much your photo is compressed, thereby
reducing it’s overall size (not to be confused with resolution).
1. In camera mode, press the Options soft key, then highlight
the current Quality indicator (F, N, E). The following values
appear in the camera screen: Fine, Normal, or Economy.
2. Select the desired Quality value.
Page 83
Camera 80
White Balance
White Balance allows you to adjust picture quality according to
available light.
1. In camera mode, press the Options soft key, then highlight
/ / / / . The following values
appear in the camera screen:
•
Auto
— The camera automatically adjusts picture quality to
available light.
•
Sunny
— Use this setting when taking pictures in full sun.
•
Cloudy
— Use this setting when taking pictures in cloudy
conditions.
•
Tungsten
— Use this setting when taking pictures under
incandescent lights.
•
Fluorescent
— Use this setting when taking pictures under
fluorescent lights.
Each option, as you highlight it, shows the effects it has on
a picture.
2. Select the desired White Balance value. The camera
viewfinder screen appears in the display with your
selected White Balance value applied.
The next time you press , the camera applies your
selected White Balance value to your picture.
Color Effect
Change the look of your pictures with Color Effect. Choose from
five available settings such as Gray, Negative, and Sepia. The
selected color effect previews in the display before you take the
picture.
1. In camera mode, press the Options soft key, then highlight
. The following values appear in the display:
•
Normal
— Subjects and pictures appear with a normal hue.
•
Black&White
— Subjects and pictures appear in black and white.
•
Sepia
— Subjects and pictures appear in a brownish-gray hue.
•
Negative
— Subjects and pictures appear in inverted colors.
•
Green
— Subjects and pictures appear in a greenish hue.
Note:
Choose
Normal
to disable Color Effects.
2. Select the Color Effects value of your choice. The camera
viewfinder screen appears in the display with your
selected Color Effects value applied.
When you take your next picture, the camera applies your
selected Color Effects value to your picture.
Settings
When you change Camera Settings values, your changes are
saved for future camera sessions, unlike changes to Camera
Page 84
81
Options. To restore Camera Settings to their default values, select
Reset Settings
. (For more information, refer to “Reset Settings”
on page 82.)
Memory
1. In camera mode, press the Options soft key, highlight
, then select
Memory
. The following storage options
appear in the display:
• Phone
— Stores your photos in phone memory.
•Card
— Stores your photos on an optional microSD Memory Card.
2. Select the memory location setting of your choice. An icon
( or ) appears in the lower left corner of the
camera screen to indicate where photos will be stored.
Auto Save
1. In camera mode, press the Options soft key, highlight
, then select Auto Save. The following values appear
in the display:
•
Off
•On
2. Select the automatic save value of your choice. You’re
returned to the camera viewfinder screen.
Icon Display
1. In camera mode, press the Options soft key, highlight
, then select Icon Display. The following values
appear in the display:
•
Display All
— Shows camera icons as seen in
“Camera
Screen Icons”
on page 76.
•
Guideline
— Shows a cross hatch pattern in the view finder
screen.
•
No Icons
— Shows a nearly full-display subject image and without
icons.
2. Select the viewfinder screen setting of your choice. You’re
returned to the camera viewfinder screen.
Shutter Sound
Choose from four different sounds whenever you take a picture.
Aside from being a cool sound effect, Shutter Sounds acts as an
audible reminder that your camera has taken a picture.
1. In camera mode, press the Options soft key, highlight
, then select Shutter Sound. The following shutter
sounds appear in the display:
•
Off
•
Shutter
•OK
•
DingDong
Page 85
Camera 82
2.
Select the shutter sound value of your choice. You’re
returned to the camera viewfinder screen. The next time
you press , you’ll hear your selected shutter sound.
Reset Settings
3. In camera mode, press the Options soft key, highlight
, then select Reset Settings. You are prompted to
confirm reset of all camera settings.
•
Select the
Ye s
option to reset the camera settings to default values.
•
Select the No option to keep the current camera settings.
Zoom
Zoom lets you temporarily enlarge the pictures you take.
Increasing the Zoom (1 – 8) enlarges your pictures (0 is normal).
䊳
In camera mode, press the Navigation key Up or Down to
adjust the Zoom (the screen image enlarges to show the
affects of your changes).
The next time you press , the camera takes an
enlarged picture according to your selected Zoom setting.
Brightness
Brightness lets you temporarily lighten the pictures you take.
Increasing the Brightness (-4 – +4) lightens your pictures (0 is
normal).
䊳
In camera mode, press the Navigation key Left or Right to
adjust the Brightness (the screen image lightens or
darkens to show the affects of your changes).
The next time you press , the camera takes a lighter or
darker picture according to your selected Brightness
setting.
My Images
Saved pictures are stored in the My Images folder. You can
browse the pictures one at a time (expanded mode), or view
several pictures at once in thumbnail format.
1. In camera mode, press the My Images soft key. Any
pictures that you’ve saved appear in the display.
Tip:
You can also access the My Images folder by pressing
Menu
( ) and
selecting
Multimedia
➔
My Images
. (For more information, refer to “My
Images” on page 86.)
2. Use the Navigation key to browse pictures in the gallery.
3. Press the Options soft key while viewing pictures in the
Gallery. The following options appear in the display:
•
Send
— Send the currently displayed or highlighted picture as a
Picture message.
Page 86
83
• Online Album
— Send a copy of the highlighted picture to your
Album on your Wireless Carrier’s server (using a Picture message).
•
Set As
— Assign the currently displayed or highlighted picture to
be standby screen Main Wallpaper, Front Wallpaper, or as a Picture
ID for someone in your Contacts list.
•
Rename
— Rename the currently displayed or highlighted picture.
•Move
— Move the currently displayed or highlighted picture
between phone memory and an optional Memory Card.
•Copy
— Save a copy of the currently displayed or highlighted
picture to phone memory or an optional Memory Card.
•
Lock
/
Unlock
— Lock the currently displayed or highlighted
picture so that it cannot be deleted, or unlock the picture so that it
can be deleted.
•
Erase Files
— Erase selected unlocked pictures in the Picture
Gallery. Locked pictures must be unlocked before you can erase
them.
•
Picture Info
— View the Title, time and date created, size, and
resolution of the currently highlighted or displayed picture.
4. Select the desired option to perform the function for the
option or enter its sub-menu.
Switch From Expanded to Thumbnail Mode
1. Highlight a picture that you wish to view full size, then
press
VIEW
().
2. To return to the thumbnail view of your photos, press
VIEW
().
Point, Click, and Send Pictures
Take a picture and send it to anyone with a compatible device in
a few easy steps.
1. In camera mode, take a desired picture by pressing .
2. Press Send ( ). The Create Pic Msg screen appears in
the display.
3. Enter or
Add
the recipient’s phone number or Email
address using the keypad.
4. Press
OK
( ). The address(es) are saved and the Subject
field appears in the
Create Pic Msg
screen. Use the
Navigation key to move to the other message fields. (For
more information, refer to “Messaging” on page 50.)
5. When you are finished composing your message, press
SEND ( ) to send the Picture message to the intended
recipients.
Page 87
easyedgeSM 84
Section 9:
easy
edge
SM
With easyedgeSM, you can download multimedia, applications,
games, and check news and sports.
Note: easy
edgeSM from U.S. Cellular is only available on approved phones
and requires an
easy
edgeSM data plan. Visit www.uscellular.com/
easyedge or call U.S. Cellular customer service (by dialing 611 on your
phone) and ask about
easy
edgeSM.
Accessing
easy
edge
SM
With
easy
edgeSM, you can download
full featured applications over the air
including games, personalized
ringtones, pictures, and more.
䊳
In standby mode, tap the
Menu
soft key, then select
easyedge
. The
easy
edgeSM screen
appears in the display.
Tip:
You can also access
easy
edgeSM from standby mode by pressing the
Right navigation key.
Launching an Application
1. In standby mode, tap the
Menu
soft key, then select
easyedge
.
The
easy
edgeSM screen appears
in the display with icons
showing for any applications
you have downloaded.
2. Highlight the application you wish to run, then press .
Finding and Downloading Applications
1. In standby mode, tap the
Menu
soft key, then select
easyedge
. The
easy
edgeSM screen appears in the display.
2. Select . The
easy
edgeSM catalog
screen appears in the
display.
3. Follow the prompts to locate, purchase (when required),
and download an application, ringtone, or other
multimedia files.
Page 88
85
Section 10: Toneroom
Toneroom is a pre-loaded application that lets you access your
Wireless Carrier’s on-line source for real music ringtones.
Accessing Toneroom
䊳
In standby mode, press Menu
( ), then select Toneroom.
The
Ton e R o om
home page
appears in the display.
Follow the links on the
Tone Room
home page to find,
purchase (if needed), and download ringtone files.
Managing Your Tones
䊳
In the
Tone Room
home page,
select the
My Tones
tab. The My
Tones page appears in the
display.
For more information about Tone Room, contact your Wireless
Provider.
Page 89
Multimedia 86
Section 11: Multimedia
This section outlines your phone’s multimedia functions and key
features associated with multimedia.
Accessing Multimedia
1. In standby mode, press Menu ( ), then select
Multimedia. The following sub-menus appear in the
display:
•
Camera
— Lets you launch and set up your phone’s camera. (For
more information, refer to
“Camera”
on page 73.)
•
My Images
— Lets you choose the pictures that appear in your
phone’s display or in picture messages.
•Music Player
— Lets you play music files stored on an optional
microSD Memory Card. (For more information, refer to
“Music
Player”
on page 66.)
•
My Ringtones
— Lets you assign ringtones for Ringtone (calls),
Contact ID, and Alert Tone.
•
My Sounds
— Lets you assign sound files as ringers for Ringtone
(calls), Contact ID, and Alert Tone.
Tip:
To launch the Multimedia menu using a voice command — In standby
mode, press and hold until the phone prompts, “Say a
command.” Say “Go to Multimedia” into the microphone.
2. Select the desired sub-menu. The following sections
describe the above listed sub-menus in greater detail.
My Images
My Images lets you choose the pictures that appear in your
phone’s display while in standby mode (Wallpaper) and as picture
IDs for your contacts.
1. At the Multimedia menu, select My Images. A 3-by-2
matrix of thumbnail images of your pictures appears in the
display.
Tip:
You can also access My Images from:
– The Camera screen by pressing the My Images soft key
– The Edit Contact screen by selecting the picture ID field and pressing
the Set soft key.
2. Highlight a picture, then press to expand the
highlighted picture to fill the screen.
3. Press the Options soft key.
Page 90
87
4.
A pop-up menu containing the following options appears in
the display:
•
Send
— Lets you send the selected image to a specified recipient
in a Picture message.
• Online Album
— Lets you send the selected image to your online
album in a Picture message. (For more information, contact your
Wireless Provider.)
•
Set As
— Lets you assign the selected picture as the
Main
Wallpaper
, the
Picture ID
for a Contact, or
Front Wallpaper
.
•
Rename
— Lets you rename the picture.
•Move
— Move the currently displayed or highlighted picture
between phone memory and an optional Memory Card.
•Copy
— Save a copy of the currently displayed or highlighted
picture to phone memory or an optional Memory Card.
•
Lock
/
Unlock
— Lets you prevent/permit picture deletion.
•
Erase Files
— Erases one or more selected pictures.
•
Picture Info
— Displays information about the picture, such as
the picture
Name
, creation
Date
and
Time, Resolution
, and the
data
Size
.
5. Select the desired option.
6. To return to the previous menu, press . To return to
standby mode, press .
My Ringtones
My Ringtones lets you assign ringtones (preloaded and
downloaded) for Ringtone, Contact Id, and as Alert Tone.
1. At the Multimedia menu, select My Ringtones. A list of
ringtones appears in the display.
Tip:
You can also access My Ringtones from:
–A Set Alarm screen by selecting the Ringer option, highlighting the
second (file name) field, pressing the Left or Right navigation key, and
selecting My Ringtones.
(For more information, refer to “Alarm Clock” on page 101.)
–The Edit Contact screen by selecting the Ringtone field, pressing the
Set soft key, and selecting My Ringtones.
(For more information, refer to “Editing a Contacts Entry” on page 40.)
2. Use the Navigation key to highlight a particular ringtone.
•
Press to
PLAY
the ringtone.
•
Press the
Info
soft key to show the Title and File Type.
3. Press the Set As soft key to assign the highlighted
ringtone. The following options appear in the display:
•
Ringtone
— Lets you assign the selected ringtone to incoming
voice calls.
•
Contact ID
— Lets you assign the selected ringtone as the
distinctive ringer for a Contact.
Page 91
Multimedia 88
•
Alert Tone
— Lets you assign the selected ringtone to
All Msg
,
Text Msg, Picture Msg
, or
Voicemail Msg
.
4. Select the desired option.
5. When using a downloaded ringtone, press the Options soft
key and the following options appear in the display:
•
Lock
/
Unlock
— Lets you prevent/permit file deletion
•
Erase
— Erases the selected file
•
Rename
— Lets you rename the selected file
•
Ringtone Info
— Displays information about the selected file,
such as the file name, the file type, and the data size
6. Select the desired option.
7. To return to the previous menu, press . To return to
standby mode, press .
My Sounds
My Sounds lets you record voice memos and lets you assign
preloaded and downloaded sound files as Ringtones, Contact IDs,
or Alert Tones.
1. At the Multimedia menu, select My Sounds. Record New
and a list of sound files appears in the display.
Tip:
You can also access My Sounds from:
–A Set Alarm screen by selecting the Ringer option, highlighting the
second (file name) field, pressing the Left or Right navigation key, and
selecting My Sounds
–The Edit Contact screen by selecting the Ringtone field, pressing the
Set soft key, and selecting My Sounds.
2. Use the navigation keys to highlight the Record New
option, then press to record a voice memo. (See
“Record New Voice Memo” on page 89 for more
information.)
3. Press the Options soft key.
•
For a preloaded sound file, a pop-up menu containing the following
options appears in the display:
–
Send
— Lets you send the selected sound file to a specified recipient in
a Picture message.
–
Set As
— Lets you assign the selected sound file as the
Ringtone
or
as the
Contact ID
for a Contact or an
Alert Tone
for Text, Picture, or
Voicemail messages.
–
Erase All
— Erases all sound files.
–
Sound Info
— Displays information about the sound file, such as the
Title, File Size, and File Type.
•
For a recorded sound file, a pop-up menu containing the following
options appears in the display:
–
Send
— Lets you send the selected sound file to a specified recipient in
a Picture message.
Page 92
89
–
Set As
— Lets you assign the selected sound file as the
Ringtone
or
as the
Contact ID
for a Contact or an
Alert Tone
for Text, Picture, or
Voicemail messages.
–
Rename
— Lets you rename the sound file.
–
Lock
/
Unlock
— Lets you protect the sound file from being deleted.
–
Erase All
— Erases all sound files.
–
Sound Info
— Displays information about the sound file, such as the
Title, File Size, File Type, and Date.
•
For a downloaded sound file, the following options appear in the
display:
–
Send
— Lets you send the selected sound file to a specified recipient in
a Picture message.
–
Set As
— Lets you assign the selected sound file as the
Ringtone
or
as the
Contact ID
for a Contact or an
Alert Tone
for Text, Picture, or
Voicemail messages.
–
Rename
— Lets you rename the sound file.
–
Lock
/
Unlock
— Lets you protect the sound file from being deleted.
–
Erase All
— Erases all sound files.
–
Sound Info
— Displays information about the sound file, such as the
file name, file type, and the data size.
4. Select the desired option.
5. To return to the previous menu, press . To return to
standby mode, press .
Record New Voice Memo
You can use your phone to record voice memos for later
playback. You can also record the caller on the other end of the
line during a phone conversation.
Note:
There is limited space for the length of recordings.
•
The maximum length for a single voice memo is 60 seconds.
Record a Voice Memo
1.
At the Multimedia menu, select My Sounds ➔ Record
New. The Record New screen appears in the display.
Tip:
You can also set your phone to record a Voice Memo while in a call. This
lets you record the phone call. (For more information, refer to “The In-
Use Options Menu” on page 27..)
2. Press , then start speaking. As it is recording the phone
displays a countdown timer that shows the seconds
remaining for the recording.
•
To pause the memo, press the
Pause
soft key. When a memo is
paused, select
Resume
to continue recording.
3. Press once you’re finished recording. The new
recording is automatically saved.
Page 93
Multimedia 90
Review Voice Memos
If you’ve saved any voice memos, you can review them anytime.
1. At the Multimedia menu, select My Sounds. A list of
sound files appears in the display.
2. Use the navigation keys to highlight the voice memo you
wish to review.
3. Press to play the voice memo.
•
To stop the memo, press . Press again to restart playing the
memo.
When the voice memo finishes playing, the selected voice
memo remains highlighted in the list of sound files.
Erase a Voice Memo
1.
At the Multimedia menu, select My Sounds. A list of
sound files appears in the display.
2. Use the navigation keys to highlight the voice memo you
wish to erase.
3. Press the Erase soft key. “Erase Sound?” appears in the
display.
4. Press the Yes soft key to erase the selected voice memo or
press the No soft key to return to the list of sound files.
Page 94
91
Section 12: Bluetooth
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30
feet without requiring a physical connection.
Unlike infrared, you don't need to line up the devices to beam
information with Bluetooth. If the devices are within a range of
one another, you can exchange information between them, even
if they are located in different rooms.
The Bluetooth wireless technology settings menu provides the
ability to view and change the device name, show the visibility,
and set the security for the device.
Turn Bluetooth On/Off
When the Bluetooth is turned on, you can use the Bluetooth
features available. When the Bluetooth is turned off, you cannot
send or receive information via Bluetooth. To save battery life or
in situations where Bluetooth use is prohibited, such as airline
traveling, you can turn off the Bluetooth wireless technology
headset. (For more information, refer to “Bluetooth Settings” on
page 92.)
Accessing Bluetooth
1. In standby mode, press Menu ( ), then select
Bluetooth. The following sub-menus appear in the
display:
• Registered List
• Bluetooth Settings
2. Select the desired Bluetooth sub-menu.
Registered List
Registered List
provides a list
of Bluetooth wireless
technology devices previously
connected to your handset.
䊳
At the Bluetooth menu,
select Registered List.
The
Bluetooth
screen
appears in the display
showing a list of devices previously connected to your
device.
Add New Device
1. At the Bluetooth menu, select Registered List ➔ Add
New Device.
Page 95
Bluetooth 92
If Bluetooth is off, you are prompted to “
Turn Bluetooth
on?
”.
•
To turn Bluetooth on, press the
Ye s
soft key.
•
To leave Bluetooth off, press the No soft key.
“
Place device you are connecting to in discoverable mode
”
appears in the display.
2. Place the Bluetooth device in discoverable mode. (For
more information, refer to the device user manual.)
3. Press . Names of the available devices appears in the
display.
4. Highlight the device you want to pair with your phone.
5. Press PAIR ( ) to pair the selected device with the
phone. You are prompted to enter the passkey or PIN for
the selected device. (For more information, refer to the
device user manual.)
6. Enter the device passkey or PIN and press .
Note:
When pairing with another Bluetooth phone, enter whatever passkey
you wish. You must, however, enter the same passkey into the other
phone when prompted.
You are prompted to verify that you want to connect with
the device.
7. To connect with the device, press the
Yes
soft key.
To bypass connecting with the device, press the No soft
key.
Connecting to a Registered Bluetooth Device
1. Power on the registered device and/or move to within 30
feet of it. Your phone should automatically reconnect with
the device or prompt you to accept such a connection.
2. If the registered device does not connect automatically,
from the Registered List, select the desired device.
Note:
If you are unable to connect with the device a pop-up appears in the
display. To retry, press the Yes soft key.
Bluetooth Settings
1. At the Bluetooth menu, select Bluetooth Settings. The
following options appear in the display:
• Enable
/
Disable
— Turns Bluetooth on or off.
•Discovery Mode
— Lets other devices “see” (access) your device.
Select On for other devices to see your device, or
Off
for no visibility.
Page 96
93
• Device Name
— Shows the handset name. You may change this
name. Enter text changes and press to save them.
• Supported Profiles
— Lists and explains the Bluetooth profiles
supported by your phone.
–
Headset
–
Handsfree
–
Object Push
–
File Transfer
–
A2DP
–
Phonebook Access
• Device Info
— Shows the Bluetooth Type, Status, and Address of
your phone.
2. Select the desired option to perform the related process.
Page 97
Tools 94
Section 13: Tools
This section explains how to use your phone’s digital assistant
tools to schedule events, set reminders, perform calculations,
and more.
Tools Menu
Tools is a suite of Personal Information Manager (PIM)
applications such as a Calendar, and Memo Pad that run on your
phone. You can use your phone to schedule events, set
reminders, perform calculations, and more with the functions
provided by this useful feature.
Opening Tools Menu
1. In standby mode, press Menu ( ), then select Tools. The
following sub-menus appear in the display:
•
Voice SVC
— Lets you access voice recognition functions.
• Calendar
— Lets you schedule events and set reminders.
•
Memo Pad
— Lets you store and review useful information.
•
Alarm Clock
— Lets you set an alarm to go off once, or daily, at a
specified time.
•
World Time
— Lets you view the current time of day or night in
another part of the world.
•
Calculator
— Lets you perform calculations, including addition,
subtraction, multiplication, and division.
•
Stop Watch
— Lets you view the amount of time.
•
Converter
— Lets you convert currencies (according to the latest
rates) and weights, measures, and temperatures from one system
or increment to another.
•
Tip Calculator
— Lets you quickly calculate service gratuities with
a minimum of key presses.
Tip:
To launch the Too ls menu using a voice command — In standby mode,
press and hold until the phone prompts, “Say a command.” Say
“Go to Tools” into the microphone.
2. Select the desired Tool sub-menu.
The following sections provide detailed descriptions of the
Tools and how to use their functions.
Voice Service
VoiceSignal is state-of-the-art voice recognition software for your
mobile phone that lets you dial numbers, lookup contact
information, and open applications using your voice. To access
your phone’s voice settings, do the following:
1. At the Tools menu, select Voice SVC.
Page 98
95
The following options appear in the display:
•
Voice Commands
— Lets you place calls, access your Contacts
List, review your appointments, and more by speaking commands
into your phone. (Also see
“Making a Call — Voice Dialing”
on page 25 and
“Voice Method”
on page 37 for more
information.)
•
Voice Settings
— Lets you adjust VoiceSignal to better suit your
needs.
2. Select the desired sub-menu.
Voice Commands
To start VoiceSignal, do one of the following:
•
In standby mode, press and hold .
“
Say a Command
” appears in the display and is pronounced through
the earpiece, followed by a list of available commands.
•
At the
Tools
menu, select
Voice SVC
➔
Voice Command
.
Note:
You can set your phone to start VoiceSignal when you open the phone.
(For more information, refer to “Voice Launch” on page 98.)
VoiceSignal includes the following commands:
–
Call
— Lets you dial the phone by saying any name stored in your
contact list, without ever having to record, or “train” that name.
VoiceSignal automatically voice-activates all your contacts, even if you
have hundreds of them stored on your phone. You can also dial any
telephone number, even if it is not stored in your contact list, by saying
the digits in the number. (For more information, refer to
“Making a
Call — Voice Dialing”
on page 25..)
–
Send Text
— Lets you launch the
Create Txt Msg
screen. (For more
information, refer to
“Create and Send Text Messages”
on
page 50.)
–
Send Picture
— Lets you launch the
Create Pic Msg
screen. (For
more information, refer to
“Send Picture Messages in Standby
Mode”
on page 54.)
–
Lookup
— Lets you look up and display contact information for any
name stored in your Contacts list by saying the name. (For more
information, refer to
“Finding a Contacts Entry”
on page 36.)
–
Go to
— Lets you access all of the Main Menus on your phone.
–
Check
— Lets you check your phone's status (that is, network
coverage, signal strength, and battery in the same report), signal
strength, network coverage, battery, and phone number.
Note:
Speaking clearly, say the command that you want to use.
If, after a few seconds, the device has not recognized a command, it
prompts you to repeat the command.
If, after a few more seconds, it still has not recognized a command, it
tells you “
Sorry, no match found
,” and cancels voice recognition.
Voice Command Tips:
•
Make sure you wait for the beep before speaking.
•
Speak clearly at a normal volume, as if you were talking on the phone.
Page 99
Tools 96
Voice-Activating Your Contacts List
When you first start VoiceSignal, it reads your Contacts list and
voice-activates all the names stored there. When you have add or
change contacts, VoiceSignal automatically reloads and voiceactivates the entire list.
Ending Calls Before Restarting the VoiceSignal Software
When you use VoiceSignal to make a call, you must end that call
before you can use VoiceSignal again.
Voice Settings
Choice Lists
VoiceSignal uses choice lists when it is not confident it has
correctly recognized a name or number. In this case, it can
display a list of up to three possible choices, and prompt you to
confirm the correct one.
You can change the way that VoiceSignal uses choice lists with
name dialing, digit dialing, and contacts. For each feature, you
can choose to always see a choice list (even if there is only one
choice), or never see a choice list (even if there are multiple
choices). If you leave the setting at “Automatic,” VoiceSignal
displays a choice list only when it is not confident it has correctly
recognized the name or number.
To change the way VoiceSignal uses choice lists:
䊳
At the Voice SVC sub-menu, select Voice Settings ➔
Choice Lists the following options appear in the display:
•
Automatic
—VoiceSignal displays a choice list only when it is not
sure if it has correctly recognized the name or number.
•
Always On
—VoiceSignal always displays a choice list, even when
there is only one choice.
•
Always Off
—VoiceSignal never displays a choice list.
Select the preferred Choice List behavior.
Sensitivity
1. At the Voice SVC sub-menu, select Voice Settings ➔
Sensitivity. The Sensitivity screen appears in the display.
2. Use the Navigation key to adjust the selected Sensitivity
setting toward Reject More spoken commands or names
or toward Reject Less spoken commands or names.
3. To accept the new setting, press .
Digit Dialing
If you regularly have trouble with VoiceSignal not recognize the
numbers you say, try adapting digit dialing to your voice.
Adapting can improve the accuracy of digit recognition,
especially for people with strong regional accents.
Page 100
97
Note:
After you adapt Digit Dial, your phone is customized to your voice, and
your voice only. Others will not be able to use it unless they reset the
Digit Dialing to factory defaults. (For more information, refer to “Reset
Digits” on page 98..)
Adaptation involves recording several sequences of four digits
each. The recording process takes about a minute.
Tips for Adapting Digit Dialing
•
Use Adapt Digits in a quiet place.
•
Make sure you wait for the beep before starting to speak.
•
Speak clearly, and say each digit distinctly.
•
If you make a mistake while recording a sequence of digits, or if there
is an unexpected noise that spoils the recording, re-record that
sequence.
•
Only adapt digits if you are regularly having problems with digit dialing.
Once you adapt, digit dialing will not work as well for other people
using your phone. (You can always reset digit adaptation to its original
state, as described below.)
Adapt Digits
To adapt digit dialing, do the following:
1. At the Voice SVC sub-menu, select Voice Settings ➔
Digit Dialing ➔ Adapt Digits.
Your phone displays the first digit sequence and “Please
say” plays through the speaker followed by the four digits
appearing in the display.
2. Wait for the beep and say the digits using your normal tone
of voice. After a moment, the phone plays back the
recording and prompts “Did the recording sound ok?”
•
If the recording was good, say “
Ye s
.”
•
If you need to re-record, say “No.”
If you say “No,” the phone prompts you to pronounce the
digits again. Wait for the beep and then say the digits.
Repeat this step until you’re satisfied with the recording.
3. After confirming that the recording sounds “ok”, continue
the recording process with the next set of digits.
4. After six sets of digits, the phone asks whether you want to
do more adaptation. Answer “Ye s.”
5. Repeat steps 4 and 5 for another six sets of digits. After
the second group of six sets of digits, “Adaptation
complete” plays through the speaker and you are returned
to the Adapt Digits menu.
Loading...