Take the time to read through this user manual before using WEP470 Bluetooth
Headset.
Bluetooth® is a registered trademark of the Bluetooth SIG, Inc. worldwide—
Bluetooth QD ID: B015141
More information about Bluetooth is available at www.bluetooth.com.
Safety precautions
Never disassemble or modify your headset for any reason. Doing this may
•
cause the headset to malfunction or become combustible. Bring the headset
to an authorized service center to repair it or replace the battery.
When using your headset while driving, follow local regulations in the country
•
or region you are in.
Avoid storage at high temperatures (above 50 °C/122 °F), such as in a hot vehicle
•
or in direct sunlight, as this can damage performance and reduce battery life.
Do not expose the headset or any of its supplied parts to rain or other liquids.
•
At very high volumes, prolonged listening to the headset can damage your hearing.
2
Getting started
This section explains the proper use of your Bluetooth headset.
Your headset overview
English
Ear hook
Earpiece
Volume up
button
Volume down
button
Make sure you have the following items with your headset:
Travel adapter, User manual.
The items supplied with your headset may vary depending on your region.
Charger jack
Talk button
Power switch
Indicator light
Microphone
3
Button functions
Talk button
Press to make or answer a call.
•
Press to end a call.
•
/ Volume up/down buttons
Press to adjust the volume.
•
Power switch
Slide the switch to turn the headset on or off.
•
Charging the headset
This headset has a rechargeable internal battery which is non-removable. Ensure
that you fully charge the battery before using the headset for the rst time.
1 Plug the small end of the travel adapter into the charger jack.
4
2 Plug the large end of the travel adapter into a power outlet.
During charging, the indicator light will turn red. If charging does not begin,
unplug the travel adapter and plug it in again.
3 When the headset is fully charged, the indicator light changes to blue.
Unplug the travel adapter from the power outlet and the headset.
Use only a Samsung-approved travel adapter. Unauthorized travel adapters may
•
cause an explosion or damage to the headset.
The battery will gradually wear out while charging or discharging because it is a
•
consumable part.
The headset is not able to operate while charging. Try connecting after charging
•
is completed.
English
5
Checking the battery level
At the same time, press and hold the Volume down button and the Talk button.
Depending on the battery level, the indicator light ashes 5 times in one of the
following colors:
Battery levelIndicator light color
Above 80%Blue
80 ~20% Violet
Below 20%Red
When the battery power is low
The headset beeps and the indicator light ashes red. Recharge the battery. If the
headset powers off during a call, the call will be automatically transferred to the phone.
6
Wearing the headset
Place the headset on your ear.
Depending on what ear you are going to wear the headset, simply adjust the ear
hook accordingly.
English
Left
Right
7
Using your headset
This section explains how to turn the headset on, pair and connect to the phone,
and use various functions.
Activated functions and features may differ depending on the types of your phone.
•
Some devices, especially those that are not tested or approved by Bluetooth SIG,
•
may be incompatible with your headset.
Turning the headset on or off
Slide the power switch to turn the headset on. The blue indicator light ashes
•
4 times.
Slide the power switch to turn the headset off. Both blue and red indicator
•
lights ash.
8
Pairing and connecting the headset
Pairing will create a unique and encrypted wireless link between two Bluetooth-enabled
devices, such as a Bluetooth phone and your Bluetooth headset.
To use the headset with other Bluetooth devices, the devices must be paired. When
trying to pair the two devices, keep the headset and the phone reasonably close
together. After pairing, you can connect the two devices.
Pairing and connecting the headset with a phone
1 Enter Pairing mode.
With the headset turned on, press and hold the Talk button until the indicator
•
light turns blue and stays lit after blinking.
When you turn on the headset for the rst time, it automatically enters
•
Pairing mode.
2 Activate the Bluetooth feature on your phone and search for the headset (see
your phone’s user manual).
3 Select the headset (WEP470) from the list of devices found by your phone.
English
9
Loading...
+ 27 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.