Samsung GH68-14774A, WEP430 User Manual

Quick Start Guide

Bluetooth Mono Headset

WEP430

Get connected in 4 quick steps

Charge your headset
Put your headset in pairing mode
Turn on Bluetooth on your phone and
pair with headset
Test and use

Start here

Before using your headset

Thank you for purchasing the Samsung Bluetooth
Mono Headset WEP430. We hope you will be
delighted with its operation.
Take a moment before you get started to
familiarize yourself with your new headset.

Multi-Function

button

Primary

microphone

Volume control

buttons

Ear-hook

Indicator light

Adapter jack

Secondary
microphone

Check the accessoriesCheck the accessories

Make sure you have the following items with your

Make sure you have the following items with your

headset:

headset:

Adapter, User’s GuideAdapter, User’s Guide

NOTE:
Your headset supports the Headset and/or Hands-Free
Profile(s).

Charge your headsetCharge your headset

Charge the headset's battery fully before using
the headset for the first time.

1

Put the adapter into the jack on the headset.

2

Plug the adapter into an electrical outlet.

• Charge the headset until the red light on the
headset turns to blue.

• The headset will be fully charged in
approximately 2 hours and 30 minutes.

3

Remove the adapter from the headset.

NOTE:
The headset is not able to operate while charging.
Try connecting after charging is completed.

Guide No.: GH68-14774A
10/2007. Rev. 1.0

Headquarters:

1301 East Lookout Drive Suite 150
Richardson, TX 75082

Internet Address:

http://www.samsungmobileusa.com/
accessories

Customer Care Center:

1-888-987-4357

Put your headset in
pairing mode

Before you can use your headset, you must pair it
with your phone.

• If you turn on the headset for the first time, it
proceeds into pairing mode immediately.

• If you have paired the headset with other Bluetooth
devices, make sure that the headset is off (see Turn
headset on or off on the reverse side of this guide).
Then press and hold the Multi-Function button until
the indicator light turns solid blue after blinking.

Turn on Bluetooth on your
phone and pair with headset

1

Set your Bluetooth phone to discover the

headset by following your phone's user guide.

Typically, the steps involve going to the Settings,
Connection, or Bluetooth menu on your
phone and then selecting the option to discover
Bluetooth devices.

Your phone will find the Samsung WEP430
headset.

2

Select Samsung WEP430.

3

When the phone asks if you want to pair with it,

confirm by selecting Yes or OK.

4

Enter the headset passkey or PIN, 0000.

Test and use

Your phone and headset are now paired and
ready to make and receive calls. To confirm
they are operating properly, make a call:

1

Place the headset over your ear.
See Wear the headset on the reverse
side of this guide.

2

On your phone, make a call to the number
you want.

3

If your phone and headset are successfully
paired, you will hear ringing on the headset.

After you have successfully paired your phone
and headset, you do not need to repeat these
initial setup steps each time you use the
headset.

Using your WEP430

See Features and Functions Guide
on the reverse side of this guide
for information on using your
WEP430.

Features and
Functions Guide

SAMSUNG
Bluetooth Mono Headset

WEP430

Important:

Be sure to first follow the
Quick Start Guide on
the reverse side of this guide
to complete initial setup
of your headset.

Turn headset on or off

To turn the headset on,

Press and hold the Multi-Function button for
4 seconds until you see 4 blue flashes on the
indicator light.
You will hear a tone and see the indicator light
flashes while the power is on
(see Meaning of the indicator light of this guide).

To turn the headset off,
Press and hold the Multi-Function button for

4 seconds until you see blue and red flashes on the
indicator light.
You will hear series of 2 tones and see the indicator
light stops flashing.

Wear the headset

Ensure some space between the ear-hook and the body
of the headset by pressing each side of the headset
and put the headset on your left or right ear.

In general, you will get better performance when there
are no obstructions (including parts of your body)
between the headset and the phone.

Adjust the volume

Press [+] on the headset to increase the volume
level and [-] to decrease the volume level.

At very high volumes, prolonged listening
to the headset can damage your hearing.

Troubleshooting

My phone does not find my headset.

Make sure the blue indicator light on your
headset turns on when your phone is
searching for devices.

My headsest worked before but now it is
not working.

Make sure your phone is on and the Bluetooth
feature is turned on in your phone.
If the Bluetooth feature has been turnned off
or was turned on only temporarily, you may
need to restart the Bluetooth feature.
If you have confirmed the Bluetooth feature is
on in your phone, pair your phone and
headset again.

Headquarters:

1301 East Lookout Drive Suite 150
Richardson, TX 75082

Internet Address:

http://www.samsungmobileusa.com/
accessories

Customer Care Center:

1-888-987-4357

Make calls

Making a voice activated call

If the phone’s voice recognition feature is on, you can
make a voice activated call.
Press and hold the Multi-Function button. You will hear
the voice-activation tone.
Say the name of the person you wish to call.
Depending on your phone, this feature may not be
supported.

Redialing the last number

Press the Multi-Function button. When you release the
button, the phone dials the last dialed or received
number.
Depending on your phone, how to redial the last number
may vary.

Ending a call

Press the Multi-Function button.

Answering a call

When a call comes in, the headset sounds the ring
tone and flashes the blue indicator twice. Press the
Multi-Function button.

Switching on or off the microphone (Mute)

Press and hold [+] or [-] to switch off the headset’s
microphone. To switch it back on, press and hold either one
of the buttons again.

Transferring a call from the phone to the headset

If you answer the call with your phone, you can transfer the
call to the headset by pressing the Multi-Function button.

Turning the indicator light on or off

You can deactivate the use of the indicator light in Standby
mode and in Active mode.
Press and hold [+] and [-] at the same time to turn the
indicator light on or off.

Use enhanced features

Enhanced features are available for phones that support the
Hands-free profile and enhanced features. Depending on
your phone, this feature may not be supported.

• Rejecting a call
When you receive a call, press and hold the Multi-Function

button. Depending on your phone's setting or type, you
may only be able to mute the ringer.

• Place a call on hold

While you are on a call, press and hold the Multi-Function

button. To retrieve the call, press and hold the button
again.

•

Answering a second call

When your phone notifies you of another incoming call

while you are on a call, press and hold the Multi-Function
button to answer the second call.
You can switch between calls by pressing and holding
the button.
Pressing the Multi-Function button quickly ends the
current call and answers the second call.

Meaning of the indicator light

Light

Flashes in
blue every
8 seconds.

Flashes in
blue every
3 seconds.

Flashes in
red.

*Depending on the phone type and usage, the actual time may vary.

Tone

Quick series
of 2 tones.
(Active mode
starts.)

Quick series
of 2 tones.
(Standby
mode starts.)

5 tones every
20 seconds.

• The headset is in Active mode.

• The headset has an active
call in progress.

• You can talk up to 5 hours.*

The headset is in Standby mode.

•

• The headset is waiting
for a call.

• The headset can be in
Standby mode up to 130
hours.*

• The battery of the headset
is low.

• There is less than 10% of
battery power left. Recharge
the battery.

Status