Samsung Galaxy S9, SM-G960F Disassembly and Assembly
Confidential
Disassembly & Assembly Guide
[ Galaxy S9 ]
Rev1.0
HHP Global CS team
Rev1.0
This material is a property of Samsung Electronics Co., Ltd. Any unauthorized use of this material can be punished
under applicable International and/or domestic law.
- This document cannot be used without Samsung’s Authorization -
Confidential
-
Revision History
Date Rev Comments Pages
Rev1.0
2018.02.20 1.0
Initial version
- This document cannot be used without Samsung’s Authorization -
Confidential
Notice
This guide is intended solely for the Samsung Electronics internal training and may contain
trade secret, industrial technology or privileged and confidential information otherwise
protected under applicable law including the Unfair Competition Prevention and Trade Secret
Protection Act. Any unauthorized dissemination, distribution, copying of use of the information
contained in this guide is strictly prohibited and subject to legal action.
All functionality, features, specifications and other product information provided in this
document including, but not limited to, the benefits, design, pricing, components, performance,
availability, and capabilities of the product are subject to change without notice or obligation.
Rev1.0
Samsung reserves the right to make changes to this guide and the product described herein,
at anytime, without obligation on Samsung Electronics to provide notification of such change.
- This document cannot be used without Samsung’s Authorization -
Confidential
Contents
1. Structure comparison of S8 edge and S9
2. Disassembly
- Pre-requisite
- Parts for disassembly
3. Assembly
- Pre-requisite
Rev1.0
- Non-reusable parts for reassembly
- Parts for assembly
- This document cannot be used without Samsung’s Authorization -
Confidential
Structure comparison
of S8 and S9
Rev1.0
- This document cannot be used without Samsung’s Authorization -
Confidential
Display
Rev1.0
S8 S9
Front Ass'y(with battery & receiver)
- The S9 display also cannot be separated from the bracket as same as S8.
- In addition, the battery & receiver cannot be reused.
Front Ass'y(with battery & receiver)
- So, the front ass’y as SVC parts consist of the front module & battery & receiver.
※ It can be supplied the front assy without battery. In case of this, it needs to order battery separately.
- This document cannot be used without Samsung’s Authorization -
Confidential
-
-
-
-
-
-
Rear Case
Rev1.0
S8 S9
3-pieces of plastic cases
Speaker and main antenna in bottom piece
MST, NFC and W/C pad in middle piece
Graphite sheet is located in left side piece
- This document cannot be used without Samsung’s Authorization -
Speaker and main antenna in bottom piece
MST, NFC and W/C pad in middle piece
Graphite sheet is located in left side piece
3-pieces of plastic cases
Confidential
Sub PBA
Rev1.0
S8 S9
There are no touch-key. There are no touch-key.
The S9 Sub PBA can be replaced without OCTA disassembling.
- This document cannot be used without Samsung’s Authorization -
Confidential
Before re
the outside tape &
inside tape &
should be changed.
Before re
the outside tape &
inside tape &
should be changed.
Back glass
Rev1.0
S8 S9
-assembling,
finger print sensor tape
- This document cannot be used without Samsung’s Authorization -
-assembling,
finger print sensor tape
Confidential
Disassembly
Rev1.0
- This document cannot be used without Samsung’s Authorization -
Confidential
Pre-requisite (Common)
Rev1.0
Tweezers
Disassembly stick
(Rounded-Tip/Plastic)
GH81-11926A GH81-14437A
Glass Absorber Anti-static mat
Screw Driver Anti-static gloves
GH81-11902D
(Earth connection)
- This document cannot be used without Samsung’s Authorization -
Confidential
Pre-requisite (To disassemble)
Rev1.0
Automatic OCTA
Disassembler
TBD
Battery disassembly
vacuum
Disassembly Jigs (Manual type)
Hot plate
GH81-12712E (220V)
GH81-12712F (110V)
Cotton Swab Spuit
OCTA Disass'y Holder
GH81-12119A GH81-12833A
OCTA Disass'y Upper
Ethyl Alcohol
(about 95%)
GH81-12712S (33pi)
※ Ethyl Alcohol can be used only for battery detaching & swollen battery.
GH81-12712N
- This document cannot be used without Samsung’s Authorization -
IMK 1108948200 GH81-12712P
Confidential
Parts for Disassembly
1. Back Glass
2. Rear Case
3. Main PBA
4. Ear Jack & Sub PBA
5. Parts on the Main PBA
- Main Camera
6. Parts on the Bracket
Rev1.0
- Vibrator, Receiver and Sensor FPCB, IR Camera, Front Camera
7. Battery
8. Front Ass'y
- This document cannot be used without Samsung’s Authorization -
Confidential
Disassembly - Back Glass (1/9)
1) Check if the back glass/OCTA is swollen or not.
Back glass/OCTA status
Core process
for battery handling
Rev1.0
Normal Swollen or deformed
The device can be heated under standard. Never heat the device. Use ethyl alcohol only.
- This document cannot be used without Samsung’s Authorization -
Confidential
Disassembly - Back Glass (2/9)
2) Input the device into the hot plate or mobile dryer.
Condition of pre-heat the device
- Case1 (with battery; SOC 68%↓) : 70℃/10~20min(Hot plate and Mobile dryer)
- Case2 (with battery; SOC 68%↑) : 60℃/10~20min(Hot plate and Mobile dryer)
Rev1.0
※ Pre-heat under 60℃ for 10~20min in case cannot check SOC, such as No power or no display.
※ Keep the pre-heating condition to prevent quality issue during repair.
- This document cannot be used without Samsung’s Authorization -
Confidential
Disassembly - Back Glass (3/9)
Rev1.0
3) Fix the device on the OCTA disassembly holder.
4) Align 1 absorber(OCTA disassembly upper)along with the back glass edge.
※ Left side of the back glass must be detached firstly.
Please keep the direction of device on the disassembly holder.
[ Note ]
Using OCTA disassembly upper is mandatory to prevent window crack,
except for using the automatic OCTA disassembler.
- This document cannot be used without Samsung’s Authorization -
Confidential
Disassembly - Back Glass (4/9)
The position of absorbers
Close to camera window
(Do not cover camera window)
Absorber
Rev1.0
Absorber
Close to the bottom of back glass
(Do not go out of the back glass)
※ Left side of the back glass must be detached firstly.
Please keep the direction of device on the disassembly holder.
- This document cannot be used without Samsung’s Authorization -
Back glass
Confidential
Loading...