Samsung Exec User Manual

Download

Page 1

SCH-i225 Series

PORTABLE DUAL-BAND

MOBILE PHONE

User Manual

Please read this manual before operating your

phone, and keep it for future reference.

Page 2

i225.1_DB22_CB_022610_F4

Intellectual Property

All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.

Samsung Telecommunications America (STA), LLC

Headquarters: Customer Care Center: 1301 E. Lookout Drive 1000 Klein Rd. Richardson, TX 75082 Plano, TX 75074 Toll Free Tel: 1.888.987.HELP (4357)

Internet Address: http://www.samsungusa.com

Do you have questions about your Samsung Mobile Phone? For 24 hour information and assistance, we offer a new FAQ/ARS System (Automated Response System) at:

www.samsungtelecom.com/support

GH68-27736A

Page 3

Printed in Korea.

Microsoft, ActiveSync, Microsoft Voice Command, Microsoft Windows Mobile, Windows Media, Internet Explorer Mobile, Microsoft Office Mobile, the Microsoft Office logo (puzzle design), Microsoft Office Outlook Mobile, PowerPoint Mobile, Excel Mobile, and Word Mobile are trademarks of the Microsoft group of companies.

The Bluetooth® word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered trademarks and are wholly owned by the Bluetooth SIG.

microSD™ and the microSD logo are Trademarks of the SD Card Association. CityID® is a registered Trademark of Cequint, Inc.

Disclaimer of Warranties; Exclusion of Liability

EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE PRODUCT “AS IS”, AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.

Page 4

Table of Contents

Section 1: Getting Started .............................................. 4

Understanding this User Manual . . . . . . . . . . . . . . . . . . . . . . . . 4

Preparing Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Activating Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Setting Up Your Phone (Basic) . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Installing a microSD™ Storage Card . . . . . . . . . . . . . . . . . . . 14

Section 2: Understanding Your Phone .........................16

Your Phone’s Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Front View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Rear View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Command Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Understanding the Display Screens . . . . . . . . . . . . . . . . . . . . . 22

Your Phone’s Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Section 3: Call Functions .............................................28

Turning the Phone Functions On and Off . . . . . . . . . . . . . . . . . 28

Making Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Using the Speakerphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Displaying Your Phone Number . . . . . . . . . . . . . . . . . . . . . . . . 32

Reviewing Your Call History . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Roaming-Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Section 4: Menu Navigation .........................................34

Home Screen Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Start Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Numbered Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Section 5: Understanding Your Contacts .................... 36

Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Adding a Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Finding a Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Changing Contact Information . . . . . . . . . . . . . . . . . . . . . . . . 38

Deleting a Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Section 6: Messaging ................................................... 39

Types of Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Sending Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Using My Text Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Retrieving a Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Accessing Message Folders . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Configuring Message Parameters . . . . . . . . . . . . . . . . . . . . . . 45

Accessing E-mail Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Launching Windows Live

Instant Messaging . . . . . . . . . . . . 49

Section 7: Internet ........................................................ 50

Internet Explorer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Internet Sharing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Messenger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

RSS Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Windows Live . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Page 5

Section 8: Personal Assistant Tools ............................ 52

Organizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Office Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Section 9: Camera – Camcorder .................................. 68

Taking Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Camera Screen Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Camera Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Album — My Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Camcorder Screen Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Camcorder Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Album — My Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Camera-Camcorder Adjustments . . . . . . . . . . . . . . . . . . . . . . 83

Point, Click, and Send Pictures . . . . . . . . . . . . . . . . . . . . . . . . 84

Section 10: Multimedia ................................................ 85

Windows Media Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Camera and Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Section 11: Microsoft Windows Mobile ....................... 89

Application Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Task Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Rebooting your Phone after Lockup . . . . . . . . . . . . . . . . . . . . 91

Resetting your Phone to Factory Defaults . . . . . . . . . . . . . . . . 91

Performing a Manual Hard Reset . . . . . . . . . . . . . . . . . . . . . . 92

Section 12: Synchronization ........................................93

Active Sync (Windows XP or earlier) . . . . . . . . . . . . . . . . . . . . 93

Synchronizing Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Customizing Synchronization Settings . . . . . . . . . . . . . . . . . . 98

Windows Mobile Device Center (Windows Vista

and Windows 7) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Section 13: Personalizing Your Phone ...................... 101

Basic Personalization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Accessing the Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . 101

Changing the Phone Settings . . . . . . . . . . . . . . . . . . . . . . . . 102

Changing the Display Settings . . . . . . . . . . . . . . . . . . . . . . . 103

Changing the Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . 107

Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

Memory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

Text Input Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

Remove Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

Message Ticker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

Accessibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

Key Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

Regional Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

Other Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

Phone Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

Owner Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

About . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

Page 6

Error Reporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

Customer Feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

Managed Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

Setup E-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

Device Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

Section 14: Health and Safety Information ...............120

Health and Safety Information . . . . . . . . . . . . . . . . . . . . . . . . 120

Please Note the Following Information When Using

Your Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121

Samsung Mobile Products and Recycling . . . . . . . . . . . . . . . 121

UL Certified Travel Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . 122

Consumer Information on Wireless Phones . . . . . . . . . . . . . . 122

Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128

Responsible Listening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129

Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Using Your Phone Near Other Electronic Devices . . . . . . . . . 131

FCC Hearing-Aid Compatibility (HAC) Regulations

for Wireless Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132

Potentially Explosive Environments . . . . . . . . . . . . . . . . . . . . 134

Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134

FCC Notice and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 135

Other Important Safety Information . . . . . . . . . . . . . . . . . . . . 135

Product Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136

Availability of Various Features/Ring Tones . . . . . . . . . . . . . . 137

Battery Standby and Talk Time . . . . . . . . . . . . . . . . . . . . . . . 137

Battery Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138

Section 15: Warranty Information ............................. 140

Standard Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 140

End User License Agreement for Software . . . . . . . . . . . . . . 143

Index ............................................................................ 148

Page 7

Getting Started 4

Section 1: Getting Started

This section explains how to start using your Samsung i225 phone by activating your service, setting up your Voicemail, or getting an understanding of how this manual is put together.

Understanding this User Manual

The chapters of this manual generally follow the same order as the menus and sub-menus in your phone. A robust index for quick reference to most features begins on page 148.

Also included is important safety information that you should know before using your phone. Most of this information is near the back of the guide, beginning on page 120.

Notes and Tips

Throughout this manual some text is set apart from the rest. In this way, important information, quick methods for activating features, to define terms, and more are emphasized. The definitions for these methods are as follows:

•

Notes

— Explain alternative options within the current feature, menu,

or sub-menu.

•

Tips

— Provide quick or innovative methods for performing functions

related to the subject at hand.

•

Important

— Points out important information about the current

feature that could affect performance, or even damage your phone.

Text Conventions

This manual provides condensed information about how to use your phone. To make this possible, the following terms and icon appear in place of repeatedly-used procedural steps:

Preparing Your Phone

Before you can activate your new phone, you need to install and charge the phone battery.

highlight

Use the Navigation key/Jog Wheel ( ) to move a highlighting effect onto a menu item or screen item of interest.

select

After “highlighting” a menu item or screen item, press the Action key ( ) or the

Done

soft key to launch, access, or save a highlighted menu item or screen field of interest.

➔ Used in place of “select” in long “drill down”

procedure steps.

Example:

Select

Start

➔

Settings

➔

Phone

➔

Call Options

Page 8

Installing the Battery

Note:

Your phone comes packaged with a partially charged rechargeable standard Li-Ion battery and travel adapter.

Important!:

You must fully charge the battery the first time you use your phone, otherwise you could damage the battery. From fully discharged to fully charged, the battery requires up to 4 hours of charge time.

1. If in place, push down on the battery cover (1).

2. Slide the battery cover down.

3. Lift the battery cover off of the phone (2), bottom end first.

4. Place the battery (1) so that the plastic tabs are aligned

with the corresponding holes in the phone.

5. Gently push the battery down (2) until it clicks into place.

6. Place the battery cover onto the back of the phone (1) by

aligning the tabs with the corresponding slots in the phone.

7. Slide the battery cover up (2) until it clicks into place.

Page 9

Getting Started 6

Removing the Battery

1. Push down on the battery cover (1).

2. Slide the battery cover down.

3. Lift the battery cover off of the phone (2), bottom end first.

4. Lift the battery up (1) and away from the phone (2).

Charging the Battery

Your phone is powered by a rechargeable standard Li-Ion battery. Only use Samsung-approved charging devices and batteries. Samsung accessories are designed to maximize battery life. Use

of other accessories may invalidate your warranty and may cause damage.

Using the Travel Adapter

The travel adapter included with your phone is a convenient, lightweight charger that rapidly charges your phone from any 120/220 VAC outlet.

1. Plug the large end of the Travel Adapter into a standard

120 VAC or 220 VAC wall outlet.

Important!:

For connection to an electrical supply not located in North America, you must use an adaptor of the proper configuration for the power outlet. Use of the wrong adapter could damage your phone and void your warranty.

Page 10

Insert the smaller end of the Travel Adapter into the charger/accessory connector on the right side of your phone.

Important!:

You must unplug the adapter before removing the battery from the phone during charging to avoid damage.

Warning!:

The display on your handset is made of glass or acrylic and pressing on the screen using excessive force or a metallic object may damage the tempered glass surface and void the warranty. For more information, refer to “

WARNING REGARDING DISPLAY

” on

page 121 and to “Warranty Information” on page 140.

Low battery indicator

The battery indicator ( ) in the upper-right corner of the display indicates power level. Monitor the battery strength and ensure your battery is adequately charged.

•

Four bars ( ) indicate a full charge.

•

An empty battery icon ( ) indicates a near empty battery.

•

A blinking empty battery icon ( ) and a tone sounding indicate you have two to three minutes before the battery is too low to operate the phone.

If you continue to use your phone without charging its battery, the phone will shut down.

Activating Your Phone

Contact your Wireless Carrier and follow their instructions for obtaining service, if necessary. We suggest that you read this guide to fully understand the services your phone supports.

Important!:

You must fully charge the battery the first time you use your phone, otherwise you could damage the battery. From fully discharged to fully charged, the battery requires up to 4 hours of charge time.

Powering On the Phone

1. Press and hold .

The startup animation plays followed by the appearance of the Home screen in the display.

Incorrect

Correct

Press & Hold

Antenna

Page 11

Getting Started 8

Note:

As with any other radio-transmitting device, do not touch the antenna (at the bottom of the device) while using your phone as this can affect call quality and can cause the phone to operate at a higher power level than is necessary.

2. If the phone functions are disabled, the “

Phone off

” message and the No Service icon ( ) appear in the display. To enable the phone functions, do the following:

•

Press and hold the

Quick

/Lock key ( ) at the lower right side of

your phone’s keypad. The

Quick List

menu appears in the display.

•

Select the

Wireless Manager

option. The

Wireless Manager

screen appears in the display. (For more information, refer to

“Wireless Manager”

on page 110.)

•

Select the

Phone

option. The Phone option setting switches from

Off

to On.

•

Press the

Done

soft key.

•

Press .

3. The phone begins searching for a network signal.

4. Once the phone finds a signal, the time, date, and day

appear in the Home screen in the display.

5. You’re now ready to place and receive calls.

Note:

If you are outside of your carrier’s coverage or roaming area, the “

Service

” message appears in the center of the phone’s display. If you cannot place or receive calls, try later when service is available, or at another location.

Setting Up Your Phone (Basic)

This process details use of the

Getting Started

feature

on your phone. You can use

Getting Started

to personalize your phone’s appearance and ringtone, and to setup some functions of your i225 for immediate use.

䊳

With the Home screen showing, press the

Start

soft key,

then select

Getting Started

( ). The following sub-

sections describe uses of the Getting Started options.

Set date and time

Provided you have service from your Wireless Carrier’s network, this is done for you, automatically.

If the “

No Service

” message is showing in the Home screen, you can set the time and date manually by doing the following:

Page 12

From the

Getting

Started

menu, select

Set date and time

➔

change the date or time

. The

Date and

Time

screen appears

in the display.

2. Scroll to the bottom

of the screen and set the

Time setting

and

Time zone setting

options to

Manual

3. Select or enter values for the following options:

•Time Zone

•Date

•Time

4. Press the

Done

soft key to save your settings. You are

returned to the

Getting Started

menu.

Set up e-mail

You can set up your i225 to give you mobile access to your business and/or private e-mail account(s).

Tip:

You can setup your i225 to synchronize your e-mail.

To set up access to an e-mail account, do the following:

1. From the

Getting

Started

menu, select

Set up e-mail

➔

set

up an e-mail account

The

E-mail Setup

screen appears in the display listing email account types.

2. Select the desired e-mail account type.

3. Enter your e-mail

address and your email account password, then press the

soft key. You

are prompted to “

Try to get e-mail settings automatically from the Internet

”.

4. Press the

soft key. You are notified when settings are

found for your e-mail provider.

Page 13

Getting Started 10

Press the

soft key.

6. Enter your name and

your e-mail account name as you wish them to be displayed on your screen, then press the

soft

key.

7. You are notified that

e-mail setup is complete:

•

If you want, select a new

Automatic Send/

Receive

value.

•

Press the

Finish

soft

key.

8. Your account

information is verified and you are returned to the

Getting

Started

menu.

Set up a device password

You can setup your i225 to require a password every time it’s turned on.

1. From the

Getting

Started

menu, select

Set up a device password

➔

Setup a

password

The

Password

Settings

screen appears in the display.

2. If you want, enter or

select values for the following options:

• Prompt if device

unused for

(1 Minute, 5 Minutes, 15 Minutes, 30 Minutes, 1 Hour, 1.5 Hours, 2 Hours, 12 Hours, or 24 Hours).

Tip:

You must check the

Prompt if device unused for

option to activate the

other options.

• Password type

(Simple PIN or Strong alphanumeric).

Page 14

• Password

• Confirm password

3. Press the

Done

soft key to save your settings.

Set up a Bluetooth headset

This option lets you pair and connect (if desired) a Bluetooth headset to your phone.

1. From the

Getting

Started

menu, select

Set up a Bluetooth headset

➔

set up a

Bluetooth headset

The

Bluetooth

Devices

screen appears in the display.

2. Set your Bluetooth

headset to Visible, then select

Add new

device...

A list of visible Bluetooth devices appears in the display.

3. Highlight your

Bluetooth headset, then press the

soft key. You are notified that your i225 has connected with your Bluetooth headset.

Set up PC synchronization

This option lets you set up your phone to synchronize your Outlook e-mail, contacts, and tasks and your pictures and songs with the same contents on your personal computer. (For more information, refer to “Synchronization” on page 93.)

Tip:

To synchronize just your music files, refer to “Transfer music” on page 13.

Page 15

Getting Started 12

Set background

This option lets you select a new background image for your Home screen.

Tip:

For a list of thumbnail views of the available Background images included with your i225, see “Personalizing Your Phone” on page 101.

1. From the

Getting

Started

menu, select

Set background

➔

Change the background image

The

Home Screen

menu appears in the display.

2. Highlight the current

Background image

setting.

3. Select a Background

image using the Left and Right Navigation key, or do the following:

•

Press the Action key ( ) to list the available Background images.

•

Select the desired Background image.

4. Press the

Done

soft key to save your selection and return to

the

Getting Started

menu.

Set ring tone

This option lets you select a ringtone to play when you receive a call.

1. From the

Getting

Started

menu, select

Set ring tone

➔

Change your ring tone

➔

Ring Tone

. The

Ringtone

screen appears in the display.

2. Select a Ring tone

using the Left and Right Navigation key, or do the following:

•

Press the Action key () to list the available Ring tones.

•

Select the desired Ring tone.

Page 16

Press the

Done

soft key to save your selection and return to

the

Sounds

menu. Press to return to the Getting

Started menu.

Set location/GPS

This option lets you select whether your i225 will be constantly identifying its location to third-party location-based services, or only identifying itself to public safety and emergency services.

1. From the

Getting

Started

menu, select

Set location/GPS

➔

set location/GPS

The Set location/GPS

Location

screen appears in the display, alerting you to the affects of selecting the ON setting.

2. To read the Location information, press the Navigation key

Down or use it as a Jog Wheel.

3. At the bottom of the

Location

screen, select the desired setting for this option.

Transfer music

This option explains how you can use Windows Media Player on your personal computer to synchronize the music files on your personal computer and on your i225.

Add/remove Getting Started

This option lets you add a Getting Started icon to the Home screen or remove a Getting Started icon from the Home screen.

1. From the

Getting

Started

menu, select

Add/remove Getting Started

The

Add/remove

Getting Started

screen appears in the display.

Page 17

Getting Started 14

Installing a microSD™ Storage Card

Note:

Using the Music Player requires that you first install a Storage Card.

Tip:

Storage Cards with a storage capacity of over 32 GB will not work with this phone.

1. Remove the battery cover and battery from your phone. For

more information, refer to “Removing the Battery” on page 6.

2. Locate the storage card slot at the top of the battery

compartment.

3. Make sure that the label side of the Storage Card is face

up, as shown.

4. Carefully slide the Storage Card into the storage card slot

until you feel it click into place.

5. Reinstall the battery and replace the battery cover on the

phone. For more information, refer to “Installing the Battery” on page 5.

Tip:

Storage Cards written to and/or formatted by other devices are likely to slow your phone’s response to commands and produce other unwanted results. To avoid such problems, format a used microSD Storage Card after inserting it in your handset. (For more information, refer to “Formatting a microSD Storage Card” on page 115.)

Removing a microSD Storage Card

1. Remove the battery cover and battery from your phone. For

more information, refer to “Removing the Battery” on page 6

2. Carefully press the Storage Card inward until you feel it

release.

3. Slowly release your pressure on the card. It will slide

outward a short distance.

4. Remove the storage card from the storage card slot.

Page 18

If desired, install another storage card in the slot.

6. Reinstall the battery and replace the battery cover on the

phone. For more information, refer to “Installing the Battery” on page 5.

Page 19

Understanding Your Phone 16

Section 2: Understanding Your Phone

This section outlines some key features of your phone. It also describes the screen format and the icons that will be displayed when the phone is in use.

Your Phone’s Features

•

Domestic and international voice and text messaging service (available on participating networks).

•

Large [2.4 inch (diagonally) color screen (320 x 240 pixel resolution)

•

High speed data (EVDO Revision 0 Technology)

•

Bluetooth® Wireless Technology (see Note)

•

Global Positioning System (GPS) Technology

•

Digital Assistant Tools

•

QWERTY Keypad

•

Text (SMS), Picture (MMS), and E-mail Messaging

•

Built-in 2.0 Megapixel Digital Camera - Camcorder

•

Voice Dial

•

Media Player (MP3 — requires an optional Storage Card)

•

Storage Card Slot (microSD™ — up to 32 GB)

Note:

The i225 phone supports the wireless headset, hands-free, dial-up networking, personal area network, A2DP, AVRCP, phonebook access, serial port, basic printing, file transfer, and object push profiles for Bluetooth® wireless technology.

Front View of Your Phone

Features

Earpiece

— Lets you hear ringing and alert tones, alarm tones, and the other parties to calls.

Charging Indicator

— Glows red when the battery is being charged. Glows green when the battery is completely charged.

Volume Key

— From the Home screen, lets you adjust the System Volume. When receiving a call, lets you temporarily mute the ringer.

Display

— Indicates the status of your phone, including numbers dialed, feature and function screens, status icons, message indicators and contents, signal strength, and so on.

5 6

Page 20

Navigation Key / Jog Wheel

— In Menu mode, lets you scroll through the phone menu options. From the Home screen, press the Navigation key Left or Right to browse the icons in the Icon Bar, or press the Navigation key Up or Down or rotate it as a Jog Wheel to browse or scroll through any menu panes/options or icons appearing in the display.

Left Soft Key

— Used to navigate through menus and applications and to select the choice indicated at the bottom left corner of the Main LCD.

Send Key

— Lets you place or receive a call. From the Home screen, press the key once to access the recent calls log.

Home Key

— Press to return to the Home screen.

QWERTY Keypad

— Use these keys to enter numbers, letters, and symbols.

10.

Fn Key

— Toggles the text input mode to let you use the QWERTY keypad to enter numbers and symbols as well as letters. In Standby mode,

11.

Shift Key

— Toggles capitalization for text input between initial capital letter (

ABC

), all capital letters (

ABC

), and all lower-case letters (abc).

12.

Calendar Key

— Launches the

Calendar tool.

13.

Sym Key

— When entering text, press to launch a Symbols screen for selecting symbols.

14.

Microphone

— Lets the other caller hear you clearly when

you are speaking to them.

15.

Space / Vibrate Mode Key

— Lets you enter spaces between words and characters. Press and hold this key to place the phone in Vibrate mode.

5 6

Page 21

Understanding Your Phone 18

16.

Voice Commands Key

— Press and hold this key to activate Voice Commands.

17.

Messaging Key

—Press to open the Messaging Inbox. Press and hold to launch the new Text message composer screen.

18.

Lock

Quick key

— Returns you to the Home screen and manually locks all keys except the

Unlock

soft key. Press and

hold to launch the

Quick List

menu. For more information, refer to “Quick List” on page 35.

19.

Enter Key

— Press to accept a

text entry or to enter spaces between lines of text.

20.

Del Key

— In text entry mode, deletes characters from the

display.

21.

Camera Key

— From the Home screen, press to launch the Content Manager screen, press and hold to launch the Camera feature of your phone. In Camera mode, press to take pictures. In Camcorder mode, press to start or pause

video recording.

22.

Back Key

— In text entry mode, deletes characters from the display. In menu mode, returns you to the previous menu or screen.

23.

End Key

— Ends a call. Returns you to the Home screen. If you press and hold the END key, the power goes On or Off. When you receive an incoming call, press to send the call to voicemail.

24.

Right Soft Key

— Used to navigate through menus and applications and to select the choice indicated at the bottom right corner of the Main Display.

25.

Action key

— When navigating through a menu, accepts the highlighted choice in a menu. When selecting settings in an option screen, displays a list of available settings.

26.

Power

USB Connector

— Used to connect charging

accessories or optional USB Data cable to your phone.

27.

Headset Connector

— Used to connect an optional headset (for hands free operation and/or music playback) or an optional TTY device.

Page 22

Rear View of Your Phone

Features

Mirror

— Helps you center the camera lens when taking

self portraits.

Camera Lens

— The lens of your built-in camera.

Speaker

— Reproduces music, video soundtracks, and

other sounds played by your phone.

Battery Cover

— Secures and protects the battery and the

optional microSD storage card.

microSD (Storage Card) Slot

— Inside the battery compartment — Lets you install and remove optional microSD card for added image/photo and music storage.

Command Keys

Soft Keys

Functions for the soft keys are indicated by labels that appear in the display above each soft key. There are two soft keys, Left ( ) and Right ( ).

Left Soft Key

Some functions of the Left soft key ( ) are as follows:

•

From the Home screen, press the

Start

soft key ( ) to open the

Start

menu.

•

When the Left soft key function is Done, press the

Done

soft key

( ) to exit the current screen or menu and save any changes.

Right Soft Key

Some functions of the Right soft key ( ) are as follows:

•

From the Home screen, press the

Contacts

soft key ( ) to launch

the

Contacts

screen.

•

When the Right soft key function is Menu, press the

soft key

( ) and a pop-up menu appears.

•

When the Right soft key function is Cancel, press the

Cancel

soft key

( ) to back up one menu level.

Action key

•

From the Home screen, press the

Action key

( ) to launch the

Date

and Time

screen.

2 3

Page 23

Understanding Your Phone 20

•

In a menu, press to accept the highlighted selection.

•

In camera mode, press to take a photo. For more information, refer to

“Camera – Camcorder”

on page 68.

•

In a list, press the

Action

key ( ) to view a highlighted item.

Send Key

The

Send

key ( ) is used to answer calls, dial calls, and to recall

the last number(s) dialed, received, or missed.

•

When receiving a call, press once to answer the call.

•

Enter a number and press to make a call.

•

From the Home screen, press to display a list of recent calls to and from your phone and of Contacts.

•

Press twice from the Home screen to call the most recent number.

•

Press to pick up a waiting call. Press again to switch back to the other call.

Back Key

The

BACK

key ( ) is used to return to a previous menu or to

return to Home screen from the

Start

menu. In some screens, you can also use the key to erase or clear numbers, text, or symbols from the display.

•

To back up one menu level, briefly press .

Del Key

The

Del

key ( ) is used to erase or clear numbers, text, or

symbols from the display.

•

If you enter an incorrect character, briefly press to backspace (and delete) the character.

•

To erase the entire entry, press and hold .

End Key

•

Press and hold the

End

key ( ) to turn your phone on or off.

•

Briefly press once to disconnect a call.

•

Press to return to standby mode from any menu, or to cancel the last input.

Navigation Key/Jog Wheel

Use the directional keys on the Navigation key ( ), or rotate it as a Jog Wheel, to browse menus, sub-menus, and lists.

Camera Key

From the Home screen, press and hold the Camera key ( ) — located on the right side of your phone — to activate the camera built into your phone.

In camera mode, pressing the Camera key ( ) takes a picture

Note:

For more information, refer to “Camera – Camcorder” on page 68.

Page 24

Fn Key

The Fn (Function) key ( ) changes the text input mode to 123 mode.

Entering Text

Your phone has a QWERTY ( ) keypad to support quick and easy text input. You can enter text as you would when using a computer keyboard.

The keys are labeled with a letter on the lower half and a number or symbol on the upper half. Press the key corresponding to the character you want to enter.

In addition, you can use the following special function keys:

Press to delete characters.

Tip:

You can also delete a character by pressing .

Press to start a new line.

Press once to enter a single capital letter (

ABC

mode).

Press twice to enter all capital letters (

ABC

mode).

Press once more to enter all lower-case letters (

abc

mode).

Press to pop-up the first of four pages of symbols in which you can select desired symbols.

Press to toggle entry mode between

abc

(all lower-case letters, Fn (a single number or symbol), and Fn (all numbers or symbols).

Press to insert a space in a text entry.

Page 25

Understanding Your Phone 22

Understanding the Display Screens

Main Display

1. The top line of your phone’s display contains icons that

indicate network status, battery power, signal strength, and more. (For more information, refer to “Display Screen Icons” on page 22.)

2. The center portion of the display shows information such

as menus, call progress information, messages, and photos.

3. The Shortcut bar is used to select which Home screen

menu appears in the Samsung WizPro

Home

screen. (For

more information, refer to “Home Screen” on page 103.)

4. The bottom line of the display shows current soft key

functions. The sample screen shows that pressing the Left (

Start

) soft key will display the

Start

menu and pressing the

Right (

Contacts

) soft key will show the

Contacts

screen, listing all contacts. (For more information, refer to “Understanding Your Contacts” on page 36.)

Display Screen Icons

The following icons can appear in the Status bar:

Shows the strength of the signal. You can also view the following service status:

• Wireless is turned off.

• No wireless coverage.

Appears when the ring type has been set to Vibrate in the current profile or the ring tone in Sounds has been set to Vibrate. Also, appears when the Silent profile is activated.

Appears when Bluetooth is activated. For details, see page 110.

Appears when a Bluetooth headset or handsfree kit connects with your device. Appears when EVDO data transfer speed is available.

Appears when 1X data speed is available.

Page 26

Dialogue Boxes

Dialogue boxes prompt for action, inform you of status, or warn of situations such as low battery. Dialogue boxes and their definitions are outlined below.

•

Choice

–

Example:

“Save Message?”

•

Reconfirm

–

Example:

“Erase All Messages?”

•

Performing

–

Example:

“Sending...” “Connecting...”

•

Completed

–

Example:

“Message Saved”

•

Information

–

Example:

“New Message”

•

Error

–

Example:

“System Error!”

•

Warning

–

Example:

“Low Battery,” “Memory Full!”

Backlights

Backlights illuminate the display and the keypad. When you press any key, the backlights come on. They go off when no keys are pressed within a period of time set in the Backlight menu.

Note:

During a phone call, the display backlight dims and turns off after 10 seconds to conserve battery power, regardless of the Backlight setting. For more information, refer to “Power Management” on page 109.

Your Phone’s Modes

Standby Mode

Standby mode is the state of the phone once it has found service and is idle. The phone goes into standby mode:

•

After you power the phone on.

•

When you press after a call or from within a menu.

From the Home screen, you will see the time, day, and date as well as all phone status icons.

Place Calls From the Home Screen

1. From the Home screen, enter a phone number, and press

to place a call.

GPS location is on.

GPS location is off unless you make an emergency (911) call. Appears when a text (SMS) message has been received.

Appears when an Email message or multimedia (MMS) message has been received. Appears when a new voicemail has been received.

Page 27

Understanding Your Phone 24

Press to return to standby mode.

Receive Messages From the Home Screen

You can receive text or MMS messages from the Home screen. An alert tone sounds and the message text or a notification message appears in the display when a new message arrives.

The following message options appear when you press the

soft key:

•

— Compose and send a message replying to this message.

•

Delete

— Delete this message from the Inbox folder.

•

Go to Inbox

— Lets you review this message and others and lets you

access additional message options.

Highlight the desired message option and then press .

Adjust the System volume

From the Home screen, you can adjust the System volume for your phone by pressing the Volume key (on the left side of the phone) Up or Down. The System volume controls the volume of all sounds played by your phone, such as ringers, alerts, alarms, and multimedia files.

1. From the Home screen, press the Volume key Up or Down

to set the System volume as desired.

When you are satisfied with the setting, press

Done

. Your phone

returns to standby mode.

Adjusting Individual Volume Settings

You can adjust individual volume settings by selecting a sound Profile and/or by changing individual sound Profile volume settings.

To select a sound Profile:

1. From the Home screen, press and hold the LOCK key. The

Quick List appears in the display showing the following Profiles:

•Normal

•Silent

2. For more profiles, select

More...

The following profiles

appear in the Quick List screen:

•Vibrate

Note:

The Vibrate icon ( ) appears in the display when the phone is in

Vibrate

mode.

• Outdoor

•Automatic

3. Select the desired Profile.

Page 28

Changing Profile sound settings:

1. From the Home screen, press

Start

, then select

Settings

➔

Profiles

. The following sound Profiles appear in the display:

•Normal

• Silent

•Vibrate

• Outdoor

•Automatic

2. Highlight the desired sound Profile, then press the

soft key and select

Edit

. The following sound settings for

the selected Profile appear in the display:

•Name

• Ring type

• Ring volume

• Reminder type

• Reminder volume

• Notification type

• Notification volume

• System sound volume

3. Highlight the desired setting and press the Navigation key

Left or Right to change the highlighted volume setting.

4. To save your setting(s), press

Done

Call Answer Mode

You can choose to answer a call by pressing any key except ,

, or by pressing only or the

Answer

soft key. For

more information, refer to “Call Options” on page 102.

Talk Mode

You can place and receive calls only when your phone is on. While in a call, your phone is in talk mode. Press the

soft key to display a list of menu options. For more information, refer to “The In-Use Options Menu” on page 31.

Enter/Exit Vibrate Mode

Silences the tones your keypad makes when you press a key and replaces all ringers with vibration.

To enter Vibrate Mode:

䊳

From the Home screen, press and hold . The phone vibrates and the Silent Mode icon ( ) appears in the display and your sound Profile automatically changes to

Vibrate

. For more information, refer to “Adjusting Individual

Volume Settings” on page 24

To exit Vibrate Mode:

䊳

While in Vibrate mode and standby mode, press and hold

. The Silent Mode icon ( ) disappears from the display and your phone automatically returns to your preset/preselected sound Profile. For more information,

Page 29

Understanding Your Phone 26

refer to “Adjusting Individual Volume Settings” on page 24.

Speakerphone Mode

Speakerphone mode lets you use your phone hands-free and/or share calls with others.

•

Entering Speakerphone Mode

— During a call, press the

soft

key, then select

Speakerphone On

•

Exiting Speakerphone Mode

— During a call, press the

soft

key, then select

Speakerphone Off

, or end the call.

Hands-free Mode

Hands-free mode lets you operate your phone remotely, without touching it other than to turn it on or off.

To place your phone in Hands-free mode, do one of the following:

•

Connect an optional wired headset. – or –

•

Pair and connect an optional Bluetooth technology headset or handsfree car kit. For more information, refer to

“Set up a Bluetooth

headset”

on page 11.

Camera Mode

Camera mode lets you take pictures with your phone’s cameracamcorder. In Camera mode, you can also adjust the resolution and appearance of your pictures.

For more information, refer to “Camera – Camcorder” on page 68.

•

Entering Camera Mode

— From the Home screen, press and hold the

Camera key ( ) — on the right side of the phone.

•

Exiting Camera Mode

— Press .

Note:

You can also enter Camera mode by pressing the

Start

soft key and

selecting

Camera

Camcorder Mode

Camcorder mode lets you record videos with your phone’s camera-camcorder. In Camcorder mode, you can also adjust the resolution and appearance of your videos.

For more information, refer to “Camera – Camcorder” on page 68.

•

Entering Camcorder Mode

— From the Home screen, press and hold

the Camera key ( ) — on the right side of the phone — then press

•

Exiting Camcorder Mode

— Press .

Note:

You can also enter Camcorder mode by pressing the

Start

soft key and

selecting

Camera

, then pressing the

soft key and selecting

Mode

() ➔

Camcorder

( ).

Page 30

Input Mode

Input mode determines how you enter text, numbers, and symbols. Optional text input modes are

abc, ABC, ABC, Fn

, and

. While at any text entry screen, press , , or to toggle between the optional modes. For more information, refer to “Entering Text” on page 21.

Tip:

You can toggle between

abc, ABC

and

ABC

entry modes by pressing .

You can toggle between

abc, Fn

and Fn entry modes by pressing .

Lock Modes

When the phone is in a Lock Mode, restrictions are placed on phone use. You can receive calls and messages, but cannot place outgoing calls (except for emergency numbers) until you unlock the phone. Lock Mode also restricts access to menus and the Volume key.

Manually Locking Your Phone

Press and hold the

Quick

/Lock key ( ).

Unlocking Manual Lock

Press the

Unlock

soft key, then press .

Unlocking Automatic Lock

Unlock your phone by entering the lock code when prompted. For more information, refer to “Device Lock” on page 114.

Page 31

Call Functions 28

Section 3: Call Functions

This section explains how to make and answer calls. This section also describes the features and functionality associated with making or answering calls.

Turning the Phone Functions On and Off

When set to Off, the Wireless Manager’s

Phone

option disables all radio functions of your phone. This prevents you from receiving or making calls (except emergency calls), but allows you to use other features (such as the camera and the Organizer) safely in sensitive environments, such as on board an aircraft.

1. At the Home screen,

press and hold the LOCK-

Quick

key

(). The

Quick List

appears in the display.

2. Select Wireless

Manager. The

Wireless Manager screen appears in the display showing the following options:

•

All

— Toggles both the Bluetooth and radio functions of your

phone to On /Off at the same time.

•

Bluetooth

— Enables/disables the Bluetooth functions of your

phone.

•

Phone

— On /

Off

— Enables/disables the radio functions of your

phone.

Tip:

At the Home screen, you can also launch Wireless Manager by pressing

Start

and selecting Settings ➔ Connections ➔ Wireless Manager.

3. If the

Phone

option is set to

Off

, select the

Phone

option to

set it to On.

4. To exit the Wireless Manager, press

Done

Making Calls

This section explains how to make and answer calls. This section also includes the features and functionality associated with making or answering calls.

Manual Dialing

1. With the phone on, enter the number you wish to call using

the keypad.

2. Press to place the call.

Dialing Emergency Numbers

To place an emergency call:

Page 32

With the phone on, enter 911 using the keypad.

2. Press to place the call.

You can specify other numbers as emergency numbers using the Emergency # settings. For more information, refer to “Emergency Numbers” on page 115.

Important!:

Emergency number 911 is preset into your phone. You can dial this number almost any time, even when the phone is locked or restricted.

If you call 911 an audible tone is heard and an Emergency prompt appears in the display for the duration of the call.

Important!:

Because of various transmission methods, network parameters, and user settings necessary to complete a call from your wireless phone, a connection cannot always be guaranteed. Therefore, emergency calling may not be available on all wireless networks at all times.

Important!:

DO NOT depend on this phone as a primary method of calling 911 or for any other essential or emergency communications.

Dialing International Numbers

Call Another Country — Manual Method:

1. From the Home

screen, enter

011

(the three-digit exit code for the United States).

2. Enter the country

code for the country that you are calling (in this example,

for South Korea).

3. Enter the number that you wish to call, then press .

Note:

Puerto Rico and Canada are on the North American dialing plan. Making calls to Puerto Rico and Canada is similar to making calls within the United States, no unique country codes are necessary.

Call Another Country — Shortcut Method:

1. From the Home

screen, press and hold until a plus sign (+) appears in the display.

Page 33

Call Functions 30

Note:

When you press , your phone automatically replaces this + with 011, the three-digit exit code for the United States.

2. Enter the number that you wish to call, then press .

Calling Contacts

You can store phone numbers and contact names in your phone’s Contacts list. To call one of your Contacts, do the following:

1. From the Home screen, press

Contacts

. The

Contacts

screen appears in the display.

2. Enter the first few letters of a Contacts list entry name. For

more information, refer to “Entering Text” on page 21. The Contacts list displays the first few entries with names matching the letters you entered.

3. Highlight the Contact you wish to call and press . For

more information, refer to “Understanding Your Contacts” on page 36.

Speed Dialing

Speed Dialing lets you quickly and easily dial any contact in your Contacts list by using that contact’s location number in the list. You can assign and change location (speed dial) numbers for your contacts. For more information, refer to “Speed Dial” on page 66.

One-Touch Dialing

Speed Dial numbers 2 through 9 are special One-Touch dialing numbers. You can call the phone numbers stored in your phone’s Contacts list and assigned Speed Dial numbers 2 through 9 by pressing and holding a single key.

Example:

For Speed Dial number 3, press and hold the key until the name and number appear in the display and the number is dialed.

Two-Touch Dialing

Memory locations 10 through 99 are special Two-Touch dialing locations.

Example:

For location number 13, briefly press , then press and hold until the name and number appear in the display and the number is dialed.

Pause Dialing From a Contacts Entry

•

If you speed dial a contact that contains (two-second) P pause(s) simply wait for the pauses to pass and the dialing to complete.

•

If you speed dial a contact that contains (hard) W pause(s), wait for the appropriate prompt(s) from the number you are calling (credit card number, bank account number, and so on) and enter the appropriate response(s).

Page 34

Calls Log Dialing

You can place a call to any number or Contact listed in the Calls Log.

1. From the Home screen, press . The combined recent

Calls and Contacts search screen appears in the display.

2. Highlight a call by browsing the list by pressing the

Navigation key Up or Down.

– or –

By entering a string of numbers or letters and searching the list.

3. Press to call the highlighted number or Contact.

Answering Calls

Your phone notifies you of a call in the following ways:

•

A ringtone sounds and/or your phone vibrates.

•

A phone number (unless blocked by the caller) and a name appear in

the display (If the caller’s number and name are stored in your Contacts list).

•

If the caller can’t be identified,

Call from unavailable#, Call from

restricted number

, or no number appears in the display.

•

Your phone continues to notify you of the call until one of the following

events occurs:

–

You answer the call.

–

You ignore the call.

–

You mute the ringer.

–

The calling party ends the call.

–

The call is sent to voicemail.

Answering an Incoming Call

䊳

To answer a call, press or press

Answer

. The ringtone and/or vibration stop and the caller’s voice can be heard in the earpiece.

Tip:

You can set your phone to automatically answer calls or to answer calls when you press any key but the key. For more information, refer to “Call Options” on page 102.

Adjusting the Call Volume

During a call, press the Volume key ( ) Up or Down until the you hear the other party to the call at the desired loudness. The Volume key is on the left side of phone.

The In-Use Options Menu

You can access numerous menus and features while in a call.

Note:

If the call is disconnected while you are accessing an In-Use Option, the In-Use Option disappears from the display and the phone eventually returns to standby mode.

1. While in a call, press Menu.

Page 35

Call Functions 32

The following menu items appear in the display:

•Mute

Unmute

— Blocks/restores sound going to the other

parties on this call.

• Speakerphone On

Off

— Enables/disables Speakerphone mode.

• Turn Hands-free On

Off

— Enables/disables Hands-Free mode.

(Requires a headset or optional Handsfree Kit.)

•Contacts

— The Contacts Find screen appears in the display.

• Save to Contacts

— Saves the number calling/called to the

Contacts list.

• View Calendar

— Launches the Calendar. For more information,

refer to

“Calendar”

on page 54.

• Call Log

— The calls list appears in the display.

2. Select the desired sub-menu or feature.

Ignoring a Call

When you ignore an incoming call, the call is immediately forwarded to your voice mail.

䊳

During an incoming call, press Ignore. The caller is forwarded to your voice mail.

Muting the Ringer

To temporarily mute the Incoming Call ringer when receiving a call, press the Volume key, on the left side of your phone, Up or Down.

Note:

Muting the ringer does not forward an incoming call to your voice mail.

Using the Speakerphone

During a call, you can place your phone in Speakerphone mode to free your hands or to share a call with others.

•

Entering Speakerphone Mode

— During a call, press

, then

select

Speakerphone On

•

Exiting Speakerphone Mode

— During a call, press

, then

select

Speakerphone Off

, or end the call.

Displaying Your Phone Number

To display the phone number your Wireless Provider has assigned to your phone:

䊳

From the Home screen, press

Start

, then select Settings

➔ More... ➔ More... ➔ Phone Information. The

Phone

Information

screen appears in the display showing the

phone number assigned to your phone.

Reviewing Your Call History

To review your recent calls, press .

To review all of your calls, press , then press

and select

View

➔

All Calls

Page 36

Roaming-Networks

What is Roaming?

Roaming lets you use your i225 phone when you travel outside of your Wireless Provider’s coverage area. Extra charges may apply when making or receiving calls.

Note:

Some features may be unavailable while roaming. Roaming also consumes additional power from the battery requiring more frequent recharging. Contact your Wireless Provider for more information about Roaming.

How Roaming Works

Roam Option lets you set roaming preferences if you move in and out of your home network.

The following roaming options are available:

•

Home Only

— Your phone is available for normal operation only in the

designated coverage area.

•

Automatic

—Your Wireless Provider’s Preferred Roaming List (PRL) of networks is used to acquire service. If no preferred networks are found, any digital system is acquired.

Note:

For more information, refer to “Roaming” on page 114

Page 37

Menu Navigation 34

Section 4: Menu Navigation

This section explains the menu navigation for your phone. It also includes an outline of all the available menus associated with your phone.

Home Screen Menus

The i225 Home screen has unique, selectable Home screen layouts. Some of these Home screen layouts include transparent menus, accessed with the Icon Bar (Samsung WizPro) and/or the Navigation key/Jog Wheel. For more information, refer to “Home Screen” on page 103.

Samsung WizPro Home Screen

The

Samsung WizPro

Home screen layout provides a set of transparent menus that give you shortcut access to frequentlyused features and functions of your i225, some of which you can setup.

䊳

To change the displayed menu, press the Navigation key ( ) Left or Right to select any of the available icons.

䊳

To browse a menu and display/highlight options, press the Navigation key Up or Down or rotate it as a Jog Wheel. To select a menu option, highlight it and press .

䊳

To return to the

Home

menu, highlight the Samsung WizPro

Home

icon ( ) or press .

Start Menu

The

Start

menu is a multipage group of icons that give you access to the functions, features, and settings for your phone.

䊳

To page through the

Start

menu, press

䊳

To scroll through the

Start

menu or to highlight a particular

icon, use as a Navigation key or as a Jog Wheel.

Shortcut Bar

Menu Area

Icon Bar

Page 38

Shortcuts

The i225 offers the following three sets of shortcuts to more easily and quickly access frequently-used sub-menus of the

Start

menu:

•

Samsung WizPro

Home

screen menus (See above.)

•

The

Quick List

menu.

•

Function keys. For more information, refer to

“Fn Key”

on page 21

Quick List

The

Quick List

menu gives you easy access to a set of frequently-

used options. To launch the Quick List, do the following:

䊳

From any screen, press and hold the

Quick

/Lock key

( ). The following options appear in the display:

•Power off

— Turns your phone off.

•Lock

— Locks all of your phone’s keys, except

Unlock

. All other

keys light the backlight.

• Task Manager

— Lets you review and manage the software tools and applications running in phone memory. For more information, refer to

“Task Manager”

on page 66

• Wireless Manager

— Launches the Wireless Manager screen which lets you enable/disable the Bluetooth and Phone (radio) functions. For more information, refer to

“Wireless Manager”

on page 110

•Normal

— Sound Profile. For more information, refer to

“Selecting a Profile”

on page 109.

• Silent

— Sound Profile. For more information, refer to

“Selecting

a Profile”

on page 109.

•More

— Lists the Vibrate, Outdoor, and Automatic sound Profiles.

For more information, refer to

“Selecting a Profile”

page 109.

Numbered Menus

The options in a number of the sub-menus and pop-up menus are numbered for quick access, such as the

Settings

sub-menu.

䊳

To select a menu option, press the respective number key.

Example:

To select

Power Management

, press .

To page through the

Settings

sub-menu, press .

Page 39

Understanding Your Contacts 36

Section 5: Understanding Your Contacts

This section details how you can manage your daily contacts by storing their names and numbers in your Contacts list. You can have your Contacts entries sorted by name.

Contact Information

You can be store hundreds of Contacts entries (depending upon available memory) in the Contacts list. Each entry can have up to five associated phone numbers and one Email address. Each phone number can be up to 32 digits in length, including 2second

Pauses

Waits

, and associated names can be up to 32 characters in length. You can also assign Speed Dial numbers of your choice for Contact entries. For more information, refer to “Speed Dial” on page 66.

Adding a Contact

You can use any of three methods to add an entirely new entry to the Contacts list.

Menu Method

1. From the Home

screen, press

Contacts

. The

Contacts

screen appears in the display.

2. Press

New

. The

Select a Type

screen appears in the display.

3. Select the desired

Contact type. The

Contact

screen appears in the display with fields unpopulated.

4. Enter or select values

for each field in turn.

•

Highlight each field by using the Jog Wheel or pressing the Navigation key Up or Down.

•

Enter values using the keypad.

•

Select values by pressing the Navigation key Left or Right.

Page 40

•

View a list of available values for a highlighted selection field by pressing

5. To save your settings, press

Done

Call Save Method

1. During a call, press

and select

Save to Contacts

. The

Select a Contact

screen appears in the display.

2. Select the

option. The

Save to Contact

screen appears in the display with the new number populating a

Number

field.

3. Enter or select values for other fields in turn.

•

Highlight each field by using the Jog Wheel or pressing the Navigation key Up or Down.

•

Enter values using the keypad.

•

Select values by pressing the Navigation key Left or Right.

•

View a list of available values for a highlighted selection field by pressing

4. To save your new Contact, press

Save

Adding Dialing Pauses

When you call automated systems (like banking services), you are often required to enter a password or account number. Instead of manually entering the numbers each time, you can store the password or account numbers in your Contacts along with special characters called pauses.

•

2-Sec Pause

— P pause — A two-second pause stops the calling sequence for two seconds and then automatically sends the remaining digits.

•

Wait

— W pause — A hard pause stops the calling sequence until you

press .

To add pause(s) to Contacts:

1. Create a new contact. For more information, refer to

“Menu Method” on page 36 or see “Call Save Method” on page 37.

2. Press Menu. A pop-up menu containing the following

options appears in the display:

•

Insert Pause

— a two-second pause — adds a “p” to the

number.

•

Insert Wait

— a hard pause (awaits input from you) — adds a

“w” to the number.

3. Select the desired pause option.

4. To save your new Contact, press

Save

Note:

If you select

Insert Pause, P

appears in the display. If you select

Insert

Wait, W

appears in the display.

Receiving Contacts from Other Phones

1. Pair with another phone using Bluetooth. For more

information, refer to “Bluetooth” on page 110.

Page 41

Understanding Your Contacts 38

When prompted, accept connection with the other Bluetooth device.

3. Verify the new Contact is in the

Contacts

Finding a Contact

1. From the Home screen, press

Contacts

. The

Contacts

screen appears in the display.

2. Enter the first few letters of the Contact name. For more

information, refer to “Entering Text” on page 21. A list of matching Contacts appears in the display.

3. Highlight the desired Contact by pressing the Navigation

key Up or Down.

Changing Contact Information

1. From the Home screen, press

Contacts

. The

Contacts

screen appears in the display.

2. Find and highlight the Contact you want to change. For

more information, refer to “Finding a Contact” on page 38.

3. Press

, then select

Edit

4. Enter or select new values for each field in turn.

•

Highlight each field by using the Jog Wheel or pressing the Navigation key Up or Down.

•

Enter/change values using the keypad.

•

Select values by pressing the Navigation key Left or Right.

•

View a list of available values for a highlighted selection field by pressing

5. To save your settings, press

Done

Deleting a Contact

1. From the Home screen, press

Contacts

. The

Contacts

screen appears in the display.

2. Find and highlight the Contact you want to change. For

more information, refer to “Finding a Contact” on page 38.

3. Press

, then select

Delete

. You are prompted to

confirm your deletion.

4. To confirm your deletion, press

Yes

Page 42

Section 6: Messaging

This section explains how to send or receive different types of messages. This section also describes the features and functionality associated with the various types of messaging.

Types of Messages

Your i225 can send Text (SMS) messages, Multimedia [picture or video (MMS)] messages, E-mail messages, and Instant Messages (IM).

Text and Multimedia Messages

You send Text and Multimedia messages by simply entering the phone number of the recipient in the

To:

field when creating a new message. Text messages can be up to 160 characters in length.

E-mail Messages

With the i225 you can send E-mail in two ways:

•

Directly, through an Internet Protocol (IP) account, or

•

Indirectly, by using Microsoft ActiveSync™ to exchange E-mail

through your PC

Instant Messages

The i225 includes Windows Live® for Mobile and Windows Live® Messenger instant messaging.

Sending Messages

Creating and Sending Text Messages

1. From the Home screen, press

Start

, then select

Messaging

() ➔

Tex t M e s s a ge s

. The

Text Messages

screen displays showing the contents of a Text Messages folder (in this case, the

Inbox

folder).

2. Press

, then

select

New

. The

Tex t

Messages

composition screen displays.

3. Enter multiple phone

number or E-mail addresses of recipient(s) in the To field.

•

Use the keypad to place a semicolon between numbers, if there is more than one recipient.

4. Select the message text input field and use the keypad to

enter the text content of your message. For more information, refer to “Entering Text” on page 21.

Page 43

Messaging 40

Note:

There is a 160-character limit for text messages. If you send a text message with more than 160 characters, the message is truncated after the first 160 characters and the remaining characters are then sent in consecutive messages until the entire message text has been sent. Charges may apply in accordance with the sender's and the recipient's calling plans.

5. For additional message options, press

. The following

options are available:

• Add Recipient

— Add Contacts entries.

• Check Names

— Check contacts for the name of the recipient.

•Insert

— Insert a Picture, Sound, Video, or Voice Notes file into your message. This automatically changes a Text message to a Multimedia (MMS) message.

•My Text

— Add pre-composed text to this message.

• Save to Drafts

— Saves the message to the draft folder.

• Copy/Paste

— Lets you select some or all text in this message, cut or copy the selected text, and paste the cut or copied text at a new place in the message.

• Cancel Message

— Cancels the new message.

• Message Options

— Launches the

Message Options

screen, which lets you select whether to receive notification when this message is delivered, change the delivery Priority, and change the Callback number to be included with this message.

6. Press

Send

to transmit your message to the selected

recipients.

Checking Names Within a Text Message

䊳

While creating a Text message, press

and select

Check Names

. For more information, refer to “Creating and

Sending Text Messages” on page 39.

Recipient names currently used within the To filed are verified against the current Contacts list and e-mail addresses are reviewed to verify they conform with the standard E-mail formats.

Creating and Sending Multimedia Messages

1. From the Home screen, press

Start

, then select

Messaging

() ➔

MMS

. The

MMS

screen appears in the display

showing the contents of a Messages folder.

2. Press

, then

select

New

. The Multimedia Message composition screen displays.

3. Enter the phone

number or E-mail addresses of up to ten recipient(s) in the

To field.

•

Use the keypad to place a semicolon between numbers, if there is more than one recipient.

Page 44

Select the Subject field and use the keypad to enter a subject for your message.

5. Select the message

text input field and use the keypad to enter the text content of your message. For more information, refer to “Entering Text” on page 21.

6. To add existing

photos, music files, or video clips to your message or to launch the Camera or Sound Recorder to take or record new files and add them to your message, select the appropriate icon(s) on the bottom line of the Multimedia Message composition screen.

7. To access additional Multimedia message options, press

. The following options are available:

•Preview

— Allows you to preview the new MMS message prior to

delivery.

• Add Recipients

— Add Contacts entries or numbers from the

recent Calls log.

•Edit Item

— Lets you Copy, Cut, Paste, Remove, or Replace a

picture, video, or sound file.

•Add

— Lets you attach both pre-existing or new files to the new MMS message: Picture, Sound, Voice Notes, Video, New Picture, New Sound, New Video, Text and MMS Template.

• Attach

— Attach your vCard, vCalendar, or a File.

•Edit Slide

— Add Slide, Delete Slide, Order Slide, Text Style, Background Color, Duration, Move Slide Up, Move Slide Down in a multi-page message.

•Save to

— Lets you save the current Multimedia message as a

Draft or an MMS Template.

• Cancel Message

— Lets you save the current message as a draft

and exit the message composer.

• MMS Options

— For more information, refer to

“Configuring

Multimedia Message Parameters”

on page 46

8. Press

Send

to transmit your message to the selected

recipients.

Note:

Charges may apply in accordance with the sender's and the recipient's calling plans.

Page 45

Messaging 42

Using My Text Messages

My Text Messages consist of 9 pre-composed text message phrases you can quickly insert into the body of a new message or as a response to a received message without having to type a message. These default messages are:

•

What are you up to?

•

Just checking in...

•

Where are you?

•

Check this out!

•

I’ll be right there.

•

I’m running late.

•

I’ll get back to you.

•

Urgent! Please reply ASAP.

•

Let’s catch up soon.

Inserting My Text in a Message

1. Create a new message. For more information, refer to

“Sending Messages” on page 39

2. Press

and select

My Text

3. Select a desired message from the list. The selected

message is then inserted into the body of the message.

4. Complete your message. For more information, refer to

“Sending Messages” on page 39

5. Press

Send

to transmit your message to the selected

recipients.

Editing My Text

1. Create a new message. For more information, refer to

“Sending Messages” on page 39

2. Press

and select

My Text

3. Select a pre-existing Text Message entry.

4. Press

and select

Edit My Text

. The highlighted Text

Message is opened for editing.

5. Use the keypad to edit the text. For more information, refer

to “Entering Text” on page 21.

6. Press

Done

to save your changes.

7. Press

Insert

return to the message and include your

changed text.

Retrieving a Message

When you receive a new text, picture, or video message, the message ringer sounds (unless turned off) and the message displays in a preview pane.

Note:

The Text Message Notification icon displays on the top of the screen.

1. To remove the preview pane from the Home screen,

Page 46

press any key.

2. To re-open and display the message in the Home screen,

press the Up or Down Navigation key to highlight your new message and press .

Read Text Messages Options

Several message features are available when reading a text message.

䊳

While reading a received text message, press

. The

following options are available:

• Delete

— Deletes the message.

•Forward

— Send a copy of this message to another recipient.

•Insert

— Add

Picture, Sound, Video

, or

Voice Notes

files to any

reply to this message.

•My Text

— Add pre-composed text to any reply to this message.

• Save to Drafts

— Saves a copy of any reply to this message in the

Drafts folder.

• Copy/Paste

— Lets you select some or all text in this message, cut or copy the selected text, and paste the cut or copied text at a new place in the message.

•Close

— Returns you to the

Inbox

folder contents screen.

•Message Options

— Lets you Request delivery notification, set

delivery Priority, and send a Callback number.

Read Multimedia Message Options

Several message features are available when reading a Multimedia message.

䊳

While reading a received Multimedia message, press

. The following options are available:

•Mute

— Silence playback of attached audio file or audio from

attached video file.

•Stop

— Stop attached audio file or video playback.

• Delete

— Delete this message.

•Reply/Forward

— Send a Text or Multimedia message reply to the sender or to all recipients of the message or forward the message to another number or email address.

• Mark as Unread

— Lets you mark the message as unread.

Unread messages are boldfaced on the message list.

• Resend

— Inactive.

•Message Info

— Displays send Date. Size, Priority, Expiration date,

and Read Report information.

• From Address

— Call the sender or save sender’s number to your

Contact list.

• Save as Template

— Save this message as a pre-composed,

Multimedia message template for later reuse.

• Attached Files...

— View and/or save attached picture file and/or

sound file, or video file.

Page 47

Messaging 44

Accessing Message Folders

Although this procedure shows Text Messages folders, the basic process and folder types are the same for all message types.

1. From the Home

screen, press

Start

then select

Messaging

() ➔

Tex t M e s s a ge s

. The

Tex t M e s s a ge s

screen displays showing the contents of a Messages folder (in this case, the

Inbox

folder).

2. Press

and

select

Folders

. A menu tree that lists Text Messages folders appears. The available Text Messages folders are:

• Deleted Items

— Stores messages that you delete from the other folders. This lets you recover messages that were erased accidentally.

• Drafts

— Lets you store messages for later completion and/or

reuse.

• Inbox

— Stores your incoming (received) messages.

• Outbox

— Stores your outgoing messages until they are sent.

•Sent Items

— Stores your outgoing messages that have been

sent.

(For information about

Outlook E-mail

folders, refer to the

Microsoft Outlook user manual.)

3. To display the contents of a folder, select it.

Received Text Message Options

Several message features are available for received text messages.

1. From the

Messages Inbox

folder screen, highlight a text

message and press

. The following options are

available:

•New

— Lets you create a new Text or Multimedia message.

• Delete

— Removes this message from the Inbox folder and places it in the Deleted Items folder. To delete more than one message, use the

Select Messages

option.

• Mark as Unread

— Changes the status of this message from

Read to Unread.

•Move

— Lets you move this message to other folders.

Page 48

•Folders

— Lets you display the contents of the Text Messages

folders: Deleted Items, Drafts, Inbox, Outbox, and Sent Items.

• Tools

– Switch Accounts

— Returns you to the

Messaging

menu to select another Messaging account: Text Messages, MMS, or an Outlook E-mail account.

– Empty Deleted Items

— Allows you to permanently erase all

messages from the Deleted Items folder.

– Options

— Allows you to change the Messaging options.

• Select Messages

— Select All messages, All Below this message,

or Several messages to which other functions will be applied.

•Reply/Forward

— Lets you Reply to the sender of this message,

Reply to the sender and All receivers of this message.

Received Multimedia Messages Options

Several message features are available for received Multimedia messages.

1. From the

Messages Inbox

folder screen, highlight a

Multimedia message and press

. The following

options are available:

•New

— Lets you create a new Text or Multimedia message.

•Reply/Forward

— Sends a reply to the sender and/or all other

recipients, or forwards this message to other people.

• Mark as Unread

— Changes the status of this message from

Read to Unread.

•Move

— Lets you move this message to any of the other MMS

folders.

•Folders

— Lets you display the contents of the MMS folders:

Deleted Items, Drafts, Inbox, Outbox, and Sent Items.

•Message Info

— Shows the Subject, Sent Date, Size, Priority, and

Expiration time limit for this message.

• Tools

– Switch Accounts

— Returns you to the

Messaging

menu to select another Messaging account: Text Messages, MMS, or an Outlook E-mail account.

– Empty Deleted Items

— Allows you to permanently erase all

messages from the Deleted Items folder.

– Options

— Allows you to change the Messaging options.

• Select Messages

— Select All messages, All Below this message,

or Several messages to which other functions will be applied.

• Send/Receive

— Inactive.

• MMS Options

— For more information, refer to

“Configuring

Multimedia Message Parameters”

on page 46.

Configuring Message Parameters

1. From the Home screen, press

Start

, then select

Messaging

() ➔

Text Me s sa ge s

MMS

. The

Text Messages

screen

or the

MMS

screen appears in the display showing the

contents of a Messaging folder.

Page 49

Messaging 46

Press

, then select

Tools

➔

Options

. The following

options appear in the display:

•Display

— Lets you select whether to show message dates and times in the message list, how the message list will sort messages, and what screen will appear in the display after you delete or move a message.

• Sending

— Lets you specify whether to include a copy or an original message with any reply to that message and whether to save copies of sent items.

• Signatures

— Lets you compose and assign a text signature to a

specific Messaging account.

• Account Settings

— Lets you select whether to request delivery notifications for your outgoing messages or whether to always send your callback number with your outgoing messages.

• Setup E-mail

— Lets you setup a new Outlook E-mail account.

• Security Settings

— Lets you specify whether Messaging with pop-up a warning before navigating to a URL or file link not on your phone.

•Other

— Lets you specify whether Messaging will display the “account picker” screen when launched or whether Messaging will warn you to confirm deleting of messages.

3. Select the desired option to display and change its

settings.

4. To save your changes, press

Done

Configuring Multimedia Message Parameters

1. From the Home screen, press

Start

, then select

Messaging

() ➔

MMS

. The

MMS

screen appears in the display,

showing the contents of an MMS folder.

2. Press

, then select

MMS Options

. The following

options appear in the display:

• Sending Options

— Lets you set delivery options and delivery reporting options for Multimedia messages.

• Receiving Options

— Lets you specify how your phone reacts to incoming Multimedia messages.

Page 50

• Composer Options

— Lets you select Message Class and Creation Mode settings for composing Multimedia messages.

• About

— Displays version information for Samsung’s Multimedia Message software.

3. To save your new settings, press

Done

Accessing E-mail Setup

You can configure i225 Messaging to send and receive E-mail using Microsoft Outlook, ActiveSync, and a PC or using an IP account.

Setting Up an Internet Service Provider (ISP) Account

You can use your i225 to access the Internet for E-mail using a connection through your Wireless Carrier or using a Wi-Fi connection. For more information, refer to “Connections” on page 110.

1. From the Home

screen, press

Start

then select

Messaging

() ➔

Setup E-mail.The

E-

mail Setup

screen appears in the display listing e-mail account types.

2. Select the desired e-mail account type.

3. Enter your E-mail address and password into the

appropriate fields and press

4. You are prompted to

let your handset automatically obtain E-mail settings.

•

If this account is to access a public ISP E-mail server, press

•

If this account is to access a private E-mail server (such as your employer’s), disable this function by selecting the checkbox next to the prompt. The check mark disappears. Then, press

Page 51

Messaging 48

Note:

For private E-mail servers, you will be prompted for specific information about the server.

- Server URL or IP address

- Server access authentication (nearly always required and usually the same as your account ID and password)

- Whether the server requires SSL (Secure Sockets Layer)

- Type of connection used to access the server

Contact the server operators or your ISP for this information.

5. You are notified when setup is complete. (For ISP servers,

you are prompted to select an automatic contact interval.)

Using an ISP for E-mail

You can configure the i225 to use an Internet Service Provider (ISP) or your network at work to send E-mail directly from the i225 without connecting to your PC through ActiveSync.

1. From the Home screen, press

Start

, then select

Messaging

() ➔ your E-mail account.

2. Review your received E-mail as needed.

3. To create and send E-mail, press Menu, and select

New

The E-mail composition screen displays.

4. Enter the E-mail address in the To field.

5. Select the Subject field and enter a subject.

6. Select the message text field and enter the content of your

E-mail message.

7. When you’re finished, press Send.

Setting Up an Outlook E-mail Account

䊳

Install ActiveSync on your PC and set up a Standard Partnership, so you can send/receive E-mail. For more information, refer to “Setting Up and Configuring ActiveSync” on page 94.

Using Microsoft Outlook for E-mail

Using Microsoft Outlook, E-mail is composed off-line and is sent to the intended recipient(s) the next time you synchronize using ActiveSync.

Note:

For more information on how to wirelessly synchronize your e-mail, refer to the Wireless Sync documentation included within the ActiveSync Companion CD.

1. From the Home screen, press

Start

, then select

Messaging

() ➔ Outlook E-mail.

2. Review your received E-mail as needed.

3. To create an send E-mail, press Menu, and select

New

The E-mail composition screen displays.

4. Enter the E-mail address in the To field.

5. Select the Subject field and enter a subject.

6. Select the message text field and enter the content of your

E-mail message.

Page 52

When you’re finished, press Send.

Outlook E-mail Folders

There are five message folders in the Outlook Email directory (see adjacent image), and their functions are similar to the folders in the Text Messages directory, except for the Outbox folder.

•

Using ActiveSync, E-mail is

stored in the Outbox until you synchronize with your PC.

•

Using an ISP, E-mail is stored in the Outbox folder until message

sending is complete.

The following is a list of Outlook E-mail messaging folders and their functions.

•

Deleted Items —

sent to the Deleted Items folder. Once messages are

removed from the Deleted Items folder, they are permanently erased.

•

Drafts —

contains all messages that were not completed and saved to

send at a later date.

•

Inbox —

all incoming messages arrive and are stored in the Inbox until deleted. If memory is full, new messages are rejected. Delete older messages to free up space for incoming messages.

•

Outbox —

the Outbox stores unsent messages until they send.

•

Sent Items —

keeps a record of all sent messages from your device.

Configuring E-mail Parameters

1. From the Home screen, press

Start

, then select

Messaging

() ➔ <E-mail Account>. The selected E-mail account folder (usually Inbox) screen appears in the display.

2. Press

, then select

Settings

. The following options

appear in the display:

• Edit Account Setup

— Lets you change your E-mail account

access settings.

• Send/Receive Schedule

— Lets you change the Automatic Send/ Receive interval, the age of the messages to be Downloaded to your phone, and Advanced Settings.

• Download Size Settings

— Lets you select the Message content format for your received E-mail messages and the Message download limit to specify how much of a message to initially download to your handset.

3. To save your changes, press

Done

Launching Windows Live® Instant Messaging

To launch Windows Live:

䊳

From the Home screen, press

Start

, then select

Internet

➔

Messenger

Windows Live

Page 53

Internet 50

Section 7: Internet

The i225 includes a number of applications to help you explore and enjoy the Internet.

Internet Explorer

You can use Internet Explorer to view web pages in two different ways:

•

By downloading pages and then performing an ActiveSync operation.

•

By connecting to the Internet Directly via your wireless data connection.

While browsing you can also download new files and programs.

Launch Internet Explorer

䊳

From the Home screen, press

Start

, then select

Internet

Explorer

().

Note:

Internet Explorer Mobile does not support all browser functions supported by Internet Explorer on a personal computer. Therefore, browser functions might not work properly with some Internet sites.

Save Favorites

When you find a web page that contains useful or interesting information, it can be saved as a favorite.

1. In standby mode, press

Start

, then select

Internet Explorer

().

2. Press

, then select

Go to Web Address

3. Enter the web address into the Address field and press

4. Press

and select

Add to Favorites

5. Select the

Name

field and use one of the text entry

methods to enter a bookmark name.

6. Select the

Folder

field and choose a bookmark storage

location (

Favorites

7. Press

Add

to store the bookmark and return to the web

page.

Internet Sharing

Internet Sharing lets you share i225 Internet connections with a single personal computer or with a network. (For more information, go to

http://www.microsoft.com/windowsmobile/en-us/ help/v6-0/connect-computer-internet-using-device-modemtouch.aspx

Note:

Please contact your Carrier before using your phone as a modem through Internet Sharing or Tethering. A tethering service plan is required due to high data usage.

Page 54

To launch Internet Sharing:

䊳

From the Home screen, press

Start

, then select

Internet

()

➔

Internet Sharing

().

Messenger

For more information, refer to “Launching Windows Live® Instant Messaging” on page 49.

RSS Reader

With RSS (Really Simple Syndication) Reader, you can have information sent to you from selected web sites, rather than having to visit these sites individually and repeatedly.

To setup RSS Reader, do the following:

1. From the Home screen, press

Start

, then select

Internet

()

➔

RSS Reader

. The

RSS Reader – Feeds

screen

appears in the display.

2. Follow the instructions on the screen to setup your folders

and subscribe to your feeds.

Windows Live

For more information, refer to “Launching Windows Live® Instant Messaging” on page 49.

Page 55

Personal Assistant Tools 52

Section 8: Personal Assistant Tools

This section explains how to use your phone’s digital assistant tools to schedule events, set reminders, perform calculations, and more.

Organizer

To access Organizer tools:

䊳

From the Home screen, press

Start

then select

Organizer

( ). The

Organizer

screen appears in the display.

Alarms

Your phone has an alarm clock that can be set to go off once, or daily at a specified time. Once set, the alarm clock is easy to change or turn off completely.

Note:

The alarm doesn’t function when the phone is turned off. If the time for an alarm that was set for Once has elapsed and the phone is off, the alarm occurs at the same time on the following day.

1. From the

Organizer

screen, select Alarms. The

following options appear in the display:

•

Wake up alarm

•

Alarm 1

•

Alarm 2

•

Alarm 3

•

Alarm 4

•

Alarm 5

•

Alarm 6

2. Select an Alarm. An

Alarm

screen appears in the display.

3. Enter or select values

for each setting in turn.

•

Highlight each setting.

Page 56

•

Select values by pressing the Navigation key Left or Right.

•

View a list of available values for a highlighted setting by pressing

4. To save your settings, press

Done

When an Alarm Sounds

An animated alarm clock appears in the display with the options Snooze or Dismiss, and an alert sounds when the specified time for the alarm arrives.

䊳

To silence the alarm, press Dismiss.

•

If the alarm was set as a Daily alarm, the alarm icon remains in the center portion of the display.

•

If the alarm was set as a Mon.-Fri., the alarm icon remains in the center portion of the display.

•

If the alarm was set as a Weekends only alarm, the alarm icon remains in the center portion of the display.

Turn Off the Alarm

Turning off an Alarm stops it from sounding when the set time is reached while retaining the Alarm settings for your reuse.

1. From the

Organizer

screen, select

Alarms ( ). A list of alarms appears in the display.

Highlight

the Alarm you wish to turn off.

3. Press

Edit

. The selected Alarm screen appears in the

display.

4. Highlight Activation and select

Off

. The highlighted Alarm is turned off, but the alarm settings are retained for later reuse.

Anniversary

Anniversary lets you set reminders of events important to you.

䊳

From the

Organizer

screen, select

Anniversary

( ). The

Anniversary

screen appears in the display, listing any

anniversaries.

•

If there are no anniversaries, press

New

to create one.

Creating a New Anniversary

1. In the

Anniversary

screen, press

New

The

New Anniversary

screen appears in the display.

2. Enter or select values

for each setting in turn.

•

Highlight each setting.

Page 57

Personal Assistant Tools 54

•

Select values by pressing the Navigation key Left or Right.

•

View a list of available values for a highlighted setting by pressing

3. To save your settings, press

Done

Changing an Anniversary

1. In the

Anniversary

screen, highlight the anniversary you

want to change.

2. Press , or press

and select

Edit

. The

Edit

Anniversary

screen appears in the display.

3. Enter or select values for each setting in turn.

•

Highlight each setting.

•

Select values by pressing the Navigation key Left or Right.

•

View a list of available values for a highlighted setting by pressing

4. To save your settings, press

Done

Deleting Anniversaries

1. In the

Anniversary

screen, highlight an anniversary you

want to delete.

2. To delete one anniversary, press

and select

Delete

You are prompted to confirm your deletion.

3. To delete more than one anniversary:

•

Press

and select

Select

. The following options are available:

–

Several

–

All

•

If you select

Several

–

Highlight each anniversary you want to delete, then press .

–

Press

, then select

Delete

You are prompted to confirm your deletion.

4. To delete your selection(s), press

Yes

Calendar

Calendar lets you view the current, past, or future month in a monthly calendar layout. While viewing the calendar, the current date is highlighted and days with scheduled appointments are surrounded by a box.

View an Appointment

1. From the Home

screen, press

Start

and select Calendar ( ). The day’s agenda appears in the display with the first appointment highlighted. The current date appears at the top of the screen.

2. Use the following keys to navigate your calendar:

Page 58

•

To move from one day to another, press the Navigation key Left or Right.

•

To move from one week to another, press

Week

, then the

Navigation key Left or Right.

•

To view previous months, press

, then select

Go to Date

and

enter the desired month.

•

To change the calendar view to monthly, press

Month

, when

available, or press

, then select

Month View

•

To access other options, press

while viewing the calendar.

Select the desired option to perform the related process.

3. In

Agenda

Week

view, select the desired appointment.

4. In

Month

view, select the desired day, then select the desired appointment. Information for the selected event appears in the display.

Add a New Appointment

1. From the Home

screen, press

Start

and select Calendar ( ). The day’s agenda appears in the display with the first appointment highlighted. The current date appears at the top of the screen.

2. Press Menu, then select New Appointment. The

New

screen appears in the display.

3. Enter or select values for each setting in turn.

•

Highlight each setting.

•

Select values by pressing the Navigation key Left or Right.

•

View a list of available values for a highlighted setting by pressing

4. To save your settings, press

Done

Deleting an Appointment

1. From the Home screen, press

Start

and select Calendar ( ). The day’s agenda appears in the display with the first appointment highlighted. The current date appears at the top of the screen.

2. Navigate to the appointment you want to delete.

3. Press

, then select

Delete Appointment

. You are

prompted to confirm your deletion.

4. To delete your selected appointment, press

Yes

Page 59

Personal Assistant Tools 56

Personalizing Your Calendar

1. From the Calendar

screen, press Menu, then select Tools ➔

Options. The

Options

screen appears in the display.

2. Enter or select values for each setting in turn.

•

Highlight each setting.

•

Select values by pressing the Navigation key Left or Right.

•

View a list of available values for a highlighted setting by pressing

3. To save your settings, press

Done

Tasks

䊳

From the

Organizer

screen, select Tas k s (). The

Tas ks

screen appears in the display listing any Tasks.

Adding a New Task

1. In the

Tasks

screen,

highlight the

Enter

new task here

field and enter the name of the new task.

2. Press . The new

Task appears in the list.

3. Press . The

Tas ks

screen changes to show the name of the new Task.

4. Press

Edit

. The

Edit

screen appears in the display.

5. Enter or select values

for each setting in turn.

•

Highlight each setting.

•

Select values by pressing the Navigation key Left or Right.

•

View a list of available values for a highlighted setting by pressing

6. To save your settings, press

Done

Page 60

Viewing a Task

1. In the

Tas ks

screen, highlight the task you want to view.

2. Press . The Task

information appears in the list.

3. To change the Task,

press

Edit

4. For other options, press

Deleting a Task

1. In the

Tas ks

screen, highlight the task you want to delete.

2. Press

, then select

Delete Task

. You are prompted to

confirm your deletion.

3. To complete the deletion, press

Yes

Voi ce Notes

䊳

From the

Organizer

screen, select Voice Notes ( ). The All Notes

screen appears in the display listing any voice notes.

Recording a New Voice Note

1. From the

Organizer

screen, select Voice Notes ( ). The All Notes

screen appears in the display listing any voice notes.

2. To begin recording,

press

Record

. A

Recording

screen appears in the display.

3. To stop recording,

press

Stop

. The new recording appears in the

All Notes

list.

4. To rename the new

Voice Note or access other options, press

Page 61

Personal Assistant Tools 58

Playing a Voice Note

1. In the

All Notes

screen, select the

Voice Note

you want to listen to. The selected Recording screen appears in the display and

Playing

begins.

2. To end playback, press

Stop

Deleting a Voice Note

1. In the

All Notes

screen, highlight the voice note you want to

delete.

2. Press

, then select

Delete

. You are prompted to

confirm your deletion.

3. To complete the deletion, press

Yes

World Clock

䊳

From the

Organizer

screen, select World Clock ( ). The World Clock

screen appears in the display showing the

current local time and any Clock assignments.

Assigning a Clock

1. In the

World Clock

screen, highlight

Clock 1

Clock 2

2. Press Assign. The

Assign

screen appears in the display.

3. Highlight the desired time zone by pressing the Navigation

key Left or Right.

4. Highlight the desired city by pressing the Navigation key

Up or Down.

5. To assign your settings, press

Done

Applying Daylight Saving Time

1. In the

World Clock

screen, highlight

Clock 1

Clock 2

2. Press

, then select

Apply DST

Home Screen Layout

䊳

To view your World Clock assignments on the Home screen, change the Home screen layout to

Samsung Multi

Clock

. For more information, refer to “Home Screen” on

page 103.

Page 62

Office Mobile

This section introduces Microsoft Office Mobile applications included with your phone. You can view different document formats with the document viewing tool, access word processing and spreadsheets documents, and even instant message others using the preloaded applications on your i225.

The i225 is an integrated communication device with the power of a mobile phone and the intelligence of a PC. The i225 is loaded with familiar Microsoft® Office Mobile applications, like Word Mobile and Excel, and several specialty applications.

To access Office Mobile:

䊳

From the Home screen, press

Start

then select

Office

Mobile

( ). The Office Mobile menu appears in the display.

Excel Mobile

Excel Mobile works with Microsoft Excel on your computer to give you easy access to copies of your workbooks. You can copy workbooks from your computer to your handset. Synchronize workbooks between your computer and your handset to ensure

that you have the most up-to-date content in both locations. Excel Mobile also provides fundamental spreadsheet tools, such as formulas, functions, sorting, and filtering.

Reviewing a Workbook

1. From the Office Mobile menu, select

Excel Mobile

( ). If there are existing workbooks on this device, the file access screen displays.

2. Select, review, and update your spreadsheet(s), as needed.

(For more information, refer to the Excel User Guide.)

3. When you are finished, press

and select Close file to

save your workbook and exit.

Note:

You can open only one workbook at a time. If you try to open a second, you are asked to save the first workbook.

Beaming a Workbook

1. From the Office Mobile menu, select

Excel Mobile

( ).

The file access screen displays.

2. Move the cursor over the workbook you want to beam,

then press

. A pop-up menu displays.

3. Select

Beam File...

4. Select the device to which you want to beam the

workbook.

5. When finished, press to exit the screen.

Page 63

Personal Assistant Tools 60

OneNote Mobile

OneNote Mobile is a digital notebook that allows you to gather, store, and manage information in a single location.

Create a Note

1. From the Office Mobile menu, select

OneNote Mobile

( ). The file access screen displays.

2. Press

New

3. Construct your note(s). For more information, refer to

“Entering Text” on page 21 and to the OneNote User Guide.

4. Press

to select formatting options.

5. When you are finished, press Done to save your

note and exit.

PowerPoint Mobile

PowerPoint Mobile works with Microsoft PowerPoint on your computer to give you easy access to copies of your presentations. You can copy presentations from your computer to your handset. Synchronize presentations between your computer and your handset to ensure that you have the most up-to-date content in both locations.

Show a Presentation

1. From the Office Mobile menu, select

PowerPoint Mobile

( ). The file access screen displays.

2. If needed, select the folder where the presentation you

wish to show resides.

3. Select the desired presentation to begin showing it.

•

To advance to the next slide, press the Navigation key Right.

•

To end the slide show, press , then press again.

Word Mobile

Word Mobile works with Microsoft Word on your computer to give you easy access to copies of your documents. You can copy documents from your computer to your handset. Synchronize the documents between your computer and your handset to ensure you have the most up-to-date content in both locations.

Use Word Mobile to create documents, such as letters, meeting minutes, and trip reports.

Viewing/Editing a Document

1. From the Office Mobile menu, select

Word Mobile

( ).

•

If there are no documents on this device, a new document automatically displays.

•

If there are existing documents on this device, the file access screen displays.

2. Enter text using the desired character input method. For

more information, refer to “Entering Text” on page 21..

Page 64

When finished, press Done to save and exit. – or – Press

, then select

File

➔

Save As...

➔

Save

to save your document with a specific name, folder, type, and location.

You can open one document at a time. If you try to open a second document, you are asked to save the first document.

You can save a document in any one of the following formats:

•

Word Document (*.docx)

•

Word Template (*.dotx)

•

Rich Text Format (*.rtf)

•

Plain Text (*.txt)

Accessing Word Mobile options

1. From the Office Mobile menu, select

Word Mobile

().

2. If there are existing documents on this device, you can

select your document from the display list.

3. Press

and the following options are available:

• Close File

— allows you to close your file.

•Edit

— allows you to edit your document.

•File

—

allows you to choose the Save As option and name your file

and to location to save to, or to Send your document in a message.

•Scroll Up/Down

— allows you to choose how you scroll through

your document, By Page or By Line.

• Find...

— allows you to search your document by entering a word

or phrase.

• About

— provides information about Microsoft Office Word

Mobile

4. When finished, press

View

to view your document.

Sideloading Microsoft Office Files

You can sideload Microsoft Office files directly onto your i225 phone for viewing or editing.

Note:

Sideloading files to your i225 requires that you connect it to a PC using an optional Data Cable, available from your Wireless Provider.

1. From the Home screen, press

Start

, then select

Settings

() ➔

Connections

➔

USB

. The

USB

screen appears in

the display with the current

Default USB Function

setting

highlighted.

2. Press the Navigation key Left or Right to change the

setting to

Mass Storage

3. Press

Done

4. Connect the i225 to your PC using an optional USB Data

Cable. The i225 will appear to your PC as a Removable Disk Drive.

5. Copy the desired Microsoft Office files to your i225.

Page 65

Personal Assistant Tools 62

Deleting a Microsoft Office File

1. From the Home screen, press

Start

, then select

Contents

Manager

() ➔

My Device

. An array of folders and files

appears in the display.

2. Highlight the cursor over the workbook you want to delete,

then press

, then select

Delete

. You are prompted to

confirm the deletion.

3. Select

Yes

to confirm the deletion.

Accessories

䊳

From the Home screen, press

Start

, then select Accessories (). The Accessories menu appears in the display.

Calculator

You can perform calculations, including addition, subtraction, multiplication, and division using your phone.

1. In the Accessories menu, select Calculator. The

Calculator screen appears in the display.

2. Enter the first number in your calculation using the keypad.

3. Use the Navigation key to set the type of calculation that

you wish to perform. Your choices are as follows:

•Up Navigation key — [x] Multiplication

•

Left

Navigation key — [-] Subtraction

•Action

key ( ) — [=] Equals/Total

•

Right

Navigation key — [+] Addition

•

Down

Navigation key — [÷] Division

For nested operations [such as (1.81 + 9.34) / 5.22] and to calculate powers (such as 32), press Menu. The following options appear in the display:

•% — Calculate a percentage of the current entry.

•

— Calculate the square root of the current entry.

•Xn — Raise the current number to the power of your next entry.

4. Use the keypad to enter the next number in your

calculation.

5. Repeat steps 3 and 4 as needed.

6. To perform the calculation and view the result, press .

To clear your last operation or number entry, press . To clear all of your entries, press Clear.

Smart Converter

The conversion menu provides the following conversion features:

•

Currency

Page 66

•

Length

•

Weight

•

Volume

•

Area

•

Temperat ure

To convert a currency, length, weight, volume, area, or temperature, do the following:

1. In the Accessories menu, select Smart Converter.

2. Select the conversion

feature you wish to use. The selected conversion feature screen appears in the display with the From

Unit

field highlighted.

3. Use the Left and

Right navigation keys to select the

Unit

to be converted From.

4. Highlight the From

Unit

field.

5. Use the keypad to enter the Unit you want converted in the

From

Unit

field.

6. Highlight the To

Unit

field.

7. Use the Left and

Right navigation keys to select the units to be converted From and To. The converted quantity appears in the To quantity field.

Currency — Reviewing/Editing Exchange Rates

The Currency Converter includes long-term average exchange rates as default values. To review and/or change a default exchange rate to the current exchange rate, do the following:

1. In the Accessories menu, select Smart Converter ➔

Currency.

2. Press Menu, then

select

View rates

. The View rates list appears in the display with the

Base

currency field highlighted.

Page 67

Personal Assistant Tools 64

Press . A list of available currencies appears in the display.

4. Highlight the desired base currency, then press

Done

5. Highlight the

currency exchange rate you want to review or change.

6. Use the keypad to

change the current exchange rate. For more information, refer to “Currency — Reviewing/Editing Exchange Rates” on page 63.

•

To save the changed exchange rate, press

Done

•

To discard your changes and return to the Currency Converter screen, press

, then select

Cancel

Currency — Adding Exchange Rates

You can use the Currency Converter to convert from and to obscure currencies by adding exchange rates for these currencies.

To add a currency and its exchange rate to the Currency Converter, do the following:

1. In the Accessories menu, select Smart Converter ➔

Currency.

2. Press Menu, then select

View rates

. The View rates list

appears in the display with the

Base

currency field

highlighted.

3. Use the Left and Right navigation keys to select the Base

currency to be converted from.

4. Press Menu, then

select Add rate. The Add rate

screen appears in the display.

5. Highlight the Name

field.

6. Enter an identifier of

up to 3 characters for the new currency using the keypad. For more information, refer to “Entering Text” on page 21.

7. Highlight the Rate

field.

Page 68

Enter a decimal exchange rate for the new currency using the keypad. For more information, refer to “Entering Text” on page 21.

9. To save the new

exchange rate, press

Done

. The Exchange

Rate list appears in

the display with your new exchange rate at the bottom of the list.

Currency — Erasing Exchange Rates

You can erase the preloaded currencies from the Exchange Rate list, as well as a currency that you have added to the list, by doing the following:

1. In the Accessories screen, select Smart Converter ➔

Currency.

2. Press Menu, then select

View rates

. The View rates list

appears in the display with the

Base

currency field

highlighted.

3. Highlight the

currency exchange rate to be erased.

4. Press Menu, then

select

Delete

. You are prompted to confirm the erasure.

•

To erase the highlighted exchange rate, press

Ye s

•

To keep the highlighted exchange rate, press No.

SmartSearch

Lets you find information stored in your i225 phone, such as: Contacts, appointments, tasks, phone calls (in the Calls Log), messages (text and e-mail), and so on.

1. In the Accessories screen, select SmartSearch. The

SmartSearch screen appears in the display.

2. In the

Find:

field, enter the character string to be matched.

Page 69

Personal Assistant Tools 66

If desired, select

All Items

. A list of available item types appears in the display. Select the desired item type to be searched.

4. If desired, highlight

Match case

and/or

Match whole word

and press .

5. For further search

options, press

6. To initiate the search,

press Go. The

Find

results

screen appears in the display listing any items found.

Speed Dial

1. In the Accessories screen, select Speed Dial. The Speed

Dial screen appears in the display listing the available

Speed Dial numbers.

2. To dial a listed Speed Dial number, highlight the list entry

and press Go.

3. To edit a listed Speed Dial number, highlight the list entry

and press .

4. For more information, highlight the

<Help>

item and press

StopWatch

1. In the Accessories screen, select StopWatch. The Stop

Watch screen appears in the display.

2. To start the Stop Watch count, press

Start

3. To save individual lap times, press

Lap

4. To stop the elapsed time count, press

Stop

5. To res e t the

Stop Watch

display, press

Reset

Task M a nager

Task Manager lets you review the software tasks currently residing in processing memory and lets you free memory by removing tasks.

1. In the Accessories screen, select Task Manager. The Task

Manager screen appears in the display, listing the

software tasks currently in phone processing memory.

2. To remove a task from processing memory (but not from

phone “permanent” memory), press

End Task

3. For other options, press

Tip Calculator

Tip Calculator automatically calculates the following amounts:

•

Gratuity (tip)

•

Individual payment (for groups)

Page 70

Calculations are based on the total amount of the check, a selected percentage, and the number of people paying.

1. In the Accessories

screen, select

Tip

Calculator

. The

Tip

Calculator

screen appears in the display with the Bill Amount field highlighted.

2. Use the keypad to

enter the total amount of the bill.

3. If needed, highlight the

Tip

field and press to change

the tip percentage.

4. If needed, highlight

the

Split

field and use the keypad to change the number of persons paying.

5. Press

Calculate

. The amount of the Tip, the bill Total, and the amount each person should pay appear in the lower half of the screen.

CityID

CityID enhances your i225 phone’s Caller ID feature by automatically displaying the city and state below the calling phone number for received wireless calls.

Note:

Additional charges apply for CityID subscription. For more information, contact your Carrier.

To start the CityID program, do the following:

䊳

In the

Start

menu, select CityID. The CityID screen

appears in the display.

Page 71

Camera – Camcorder 68

Section 9: Camera – Camcorder

Use your i225 phone to take full-color digital pictures or record full-color digital videos, display them on your phone’s vivid color display, and instantly share them with family and friends. It’s fun, and as easy to use as a traditional point-and-click camera. This section explains how you can do the following:

•

Take pictures and record videos with your phone’s built-in digital camera-camcorder.

•

Send your pictures or videos to others in Multimedia messages.

•

Set the several options associated with the camera-camcorder that help you take crisp, clear pictures/videos.

Taking Pictures

Taking pictures with the built-in camera-camcorder is as simple as launching the camera, choosing a subject, pointing the lens (located on the top-rear of your phone), and pressing a key.

Taking Snap Shots (Single Pictures)

To take a single picture using the current camera settings, do the following:

1. In standby mode, press and hold the Camera key ( )

on the right side of the phone. The camera viewfinder screen appears in the display. For more information, refer to “Camera Screen Layout” on page 71.

Note:

You can also launch the camera by pressing

Start

, then selecting

Camera

( ).

2. Using the display as a viewfinder, point the camera lens (at

the top-rear of the phone) at your subject.

3. When the image that you wish to capture appears in the

display, press the Camera key ( ) or . Your new picture appears in the Review Screen.

145

Page 72

The following options are available:

•

To save the picture to memory, press

Save

•

To access the following options, press

–

To save the picture and send a copy of it to someone else, select

Send via MMS

. For more information, refer to

“Creating and Sending Multimedia Messages”

on page 40.

–

To set the picture as wallpaper for the Home screen, select

Set as

Homescreen

–

To discard the picture without saving it, select

Cancel

Tip:

You can change a number of the camera’s options and settings to suit particular uses for your pictures. See “Camera Options” on page 73 for more information.

Taking Multi Shot Pictures

When taking pictures of moving subjects or subjects you cannot pose, such as children and pets, the camera’s Multi Shot mode simplifies the process of taking multiple pictures in quick succession. After taking Multi Shot pictures, you can go to your

Album

(the My Pictures folder), review thumbnail or full screen

views of the pictures you have just taken, and can select the best picture(s) and discard the rest.

1. In standby mode,

press and hold the Camera key ( ) on the right side of the phone. The camera viewfinder screen appears in the display. For more information, refer to “Camera Screen Layout” on page 71.

Note:

You can also launch the camera by pressing

Start

, then selecting

Camera

( ).

2. Press Menu. The options menu bar appears at the top of

the camera screen.

3. Highlight the Shooting Mode icon ( , , ,

, or ). The following Shot Type options appear in

the display:

•

Single Shot

— — Lets you take 1 photo at a time.

•

Multi Shot

— — Lets you take a series of photos in quick

succession, automatically saving each photo.

145145145

Page 73

Camera – Camcorder 70

•

Mosaic Shot

— — Lets you take 4 shots that combine to

form a mosaic photo.

•

Funny Mask

— — Lets you select colorful masks to include around the subjects your photos (press the Navigation key Left and Right to preview available masks).

• Smile Detection

— — Takes the photo only when the

subject person smiles.

4. Select

Multi Shot

Mosaic Shot

•

When you select

Multi Shot

, the Multi Shot icon ( ) appears in

the display, and the

Size

setting automatically decreases to .

Each photo is automatically saved.

•

When you select

Mosaic Shot

, the Mosaic Shot icon ( ) appears in the display. When you take the first Mosaic Shot photo the progress array ( ) appears in the display.

5. Using the display as a viewfinder, point the camera lens at

your subject.

6. When the image that you wish to capture appears in the

display, press or the Camera key ( ). The camera takes one picture (Manual) or multiple pictures in quick succession (Auto).

Recording Videos

Recording videos with the built-in camera-camcorder is as simple as launching the camera, switching to camcorder mode, choosing a subject, pointing the lens (located on the top-rear of your phone), and pressing a key to start and stop video recording.

To record a video using the current camcorder settings, do the following:

1. In standby mode, press and hold the Camera key ( )

on the right side of the phone. The camera viewfinder screen appears in the display. For more information, refer to “Camera Screen Layout” on page 71

Note:

You can also launch the camera by pressing

Start

, then selecting

Camera

( ).

2. Launch the camcorder by pressing .

Tip:

Change to camcorder mode by pressing

, then highlighting the

Mode

icon ( ) and selecting

Camcorder

( ).

Page 74

Using the display as a viewfinder, point the camera lens (at the top-rear of the phone) at your subject.

4. When the image that you wish to capture appears in the

display, press the Camera key ( ) or to start video recording.

•

To pause the recording, press .

•

To resume the recording, press .

5. To end the recording, press .

6. Your new picture appears in the Review Screen.

The following options are available:

•

To save the video to memory, press

Save

•

To preview the video, press .

•

To discard the video without saving it, select

Cancel

Tip:

You can change a number of the camcorder’s options and settings to suit particular uses for your videos. See “Camcorder Options” on page 79.

Camera Screen Layout

When you activate your phone’s camera, the top two lines of the display are reserved for camera icons (when active). The center of the display shows a viewfinder image of the subject at which the camera is pointed.

Camera Screen Soft Keys

The soft key labels on the bottom line of the display change to the following:

•

Album

— Pressing the Left soft key opens the

My Pictures

folder on the Default Storage location so you can view or manage your stored pictures. See

“Album — My Pictures”

on page 76 for more

information.

•

Shortcuts

— Pressing

the Navigation key

takes a picture of the

subject currently appearing in the camera view finder screen.

•

— Pressing the Right soft key opens a menu bar of camera

options and settings.

145145145

Page 75

Camera – Camcorder 72

Camera Screen Icons

Mode

— Indicates the camera is active.

Tip:

To change the Mode setting to Camcorder, press .

Shooting Mode

— Indicates the type of photo the camera will take each time you press or the Camera key ( ). Available Shooting Modes are: Single Shot (shown), Multi Shot ( ), Mosaic Shot ( ), Funny Mask ( ), and Smile Detection ( ). For more information, refer to “Shooting Mode” on page 73.

Size

— Indicates camera’s current resolution setting.

Available Sizes are:

1600x1200

(shown),

1280x1024

(),

640x480

(), and

320x240

( ). See

“Camera Options” on page 73 for more information.

White Balance

— Indicates camera’s white balance setting. You can change the camera white balance setting. For more information, refer to “White Balance” on page 74.

Effect

— Lets you change the color content of the subject image to shades of a selected color. [Available color effects are:

No Effect

(shown),

Black & White

(),

Sepia

( ), and

Negative

().]

Night Shot

— Lets you take photos in low light.

(Available values are

Off

() or On ().

Settings

— Launches tabbed menus of options that retain your settings until you change or reset them. For more information, refer to “Settings” on page 75.

Default Memory

— Indicates where photos will be stored

[

My Device

(shown) or

SD Card

()].

Photo Limit

— Indicates the number of photos you can

take with the available memory. (Depending on the

Size

and

Default Memory

values.)

Zoom

— Enlarges the image from x00 to x05 before you take a picture. For more information, refer to “Zoom” on page 83.

Viewfinder Mode

— Indicates current viewfinder screen format setting [Available options are no icons ( ), all icons (shown), or crosshatch ( )].

Brightness

— Brightens ( ) or darkens ( ) the

image from

-2.0

+2.0

before you take a picture. For

more information, refer to “Brightness” on page 83.

Self Timer

— Delays the camera shutter

Off

(shown, 0 seconds) or for 2 (), 5 (), or 10 ( ) seconds after you press .

Page 76

Camera Options

The Camera Options let you temporarily adjust default camera settings to suit available lighting, the subject of the photo, or the purpose of the photo, for the current camera session. When you exit the camera, your Camera Options values revert to their default values.

To access Camera Options, do the following:

1. In camera mode, press Menu. The Camera Options menu

appears in the display.

2. Select a sub-menu, then select a preferred value.

The following sub-sections describe camera options and available values.

Shooting Mode

Shot Type lets you take multiple photos or shots in succession at the touch of a key and/or add colorful frames to your photos.

1. Highlight the Shooting Mode icon ( , , ,

, or ). The following Shot Type options appear in

the display:

•

Single Shot

— — Lets you take 1 photo at a time.

•

Multi Shot

— — Lets you take a series of photos in quick

succession, automatically saving each photo.

•

Mosaic Shot

— — Lets you take 4 shots that combine to

form a mosaic photo.

•

Funny Mask

— — Lets you select colorful masks to include around the subjects your photos (press the Navigation key Left and Right to preview available masks).

• Smile Detection

— — Takes the photo only when the

subject person smiles.

2. Select the desired Shot Type.

•

When you select

Multi Shot

, the Multi Shot icon ( ) appears in

the display, and the

Size

setting automatically decreases to .

Each photo is automatically saved.

•

When you select

Mosaic Shot

, the Mosaic Shot icon ( ) appears in the display. When you take the first Mosaic Shot photo the progress array ( ) appears in the display.

Size

lets you change the clarity (in pixels) and size (in bytes) of

your pictures.

1. In camera mode, press Menu, then highlight the

Resolution setting. The following values appear in the camera screen:

•

1600x1200

(pixels)

•

1280x1024

(pixels)

•

640x480

(pixels)

•

320x240

(pixels)

2. Select the desired Size value.

Page 77

Camera – Camcorder 74

Night Shot

Night Shot lets you take pictures in low light conditions.

1. In camera mode, press Menu, then highlight or .

The following options appear in the display:

•Off

•On

2. Select the Night Shot setting of your choice.

White Balance

White Balance allows you to adjust picture quality according to available light.

3. In camera mode, press Menu, then highlight / /

/ / .

The following values appear in the camera screen:

•

Auto

— The camera automatically adjusts picture quality

to available light.

•

Daylight

— Use this setting when taking pictures in full

sun.

•

Cloudy

— Use this setting when taking pictures in cloudy

conditions.

•

Incandescent

— Use this setting when taking pictures

under incandescent lights.

•

Fluorescent

— Use this setting when taking pictures under

fluorescent lights.

Each option, as you highlight it, shows the effects it has on a picture.

4. Select the desired White Balance value. The camera

viewfinder screen appears in the display with your selected White Balance value applied.

The next time you press , the camera applies your selected White Balance value to your picture.

Color Effect

Change the look of your pictures with Color Effect. Choose from eight available settings such as Black&White, Negative, and Sepia. The selected color effect previews in the display before you take the picture.

1. In camera mode, press Menu, then highlight / /

/ . The following values appear in the display:

•

No Effect

— Subjects and pictures appear with a normal

hue.

•Black&White

— Subjects and pictures appear in black and

white.

•Sepia

— Subjects and pictures appear in a brownish-gray

hue.

•Negative

— Subjects and pictures appear in inverted colors.

2. Select the Effects value of your choice. The camera

viewfinder screen appears in the display with your selected Effects value applied.

Page 78

When you take your next picture, the camera applies your selected Effects value to your picture.

Settings

When you change Camera Settings values, your changes are saved for future camera sessions, unlike changes to Camera options.

䊳

In camera mode, press Menu, then select

Settings

().

The Settings menu appears in the display with the

Camera

tab and

Quality

setting highlighted.

Quality

You can affect how much your photo is compressed, thereby reducing it’s overall size (not to be confused with resolution).

1. In the Settings menu, highlight the

Camera

tab, then

highlight

Quality

and press the Navigation key to the Right.

The following values appear in the camera screen: Super

Fine, Fine, Normal, or Economy.

2. Select the desired Quality value.

Shutter Sound

Choose from four different sounds whenever you take a picture. Aside from being a cool sound effect, Shutter Sounds acts as an audible reminder that your camera has taken a picture.

1. In the Settings menu, highlight the

Camera

tab, then

highlight Shutter Sound and press the Navigation key to

the Right. The following values appear in the camera screen:

•

Shutter 1

•

Shutter 2

•

Shutter 3

•

Off

2. Select the Shutter Sound value of your choice. You’re

returned to the camera viewfinder screen. The next time you press , you’ll hear your selected shutter sound.

Sound Zoom

Choose enable or disable a sound to play when you adjust the camera Zoom ( ) using the Jog Wheel or Volume key.

1. In the Settings menu, highlight the

Camera

tab, then highlight Sound Zoom and press the Navigation key to the Right. The following values appear in the camera screen:

•On

•

Off

2. Select the Sound Zoom value of your choice. You’re

returned to the camera viewfinder screen.

Sound Brightness

Choose enable or disable a sound to play when you adjust the camera Brightness ( ) using the Navigation key.

Page 79

Camera – Camcorder 76

In the

Settings

menu, highlight the

Camera

tab, then highlight Sound Brightness and press the Navigation key to the Right. The following values appear in the camera screen:

•On

•

Off

2. Select the Sound Brightness value of your choice. You’re

returned to the camera viewfinder screen.

Viewfinder Mode

Choose the format for the Camera viewfinder screen.

1. In the

Settings

menu, highlight the

Setup

tab, then highlight Viewfinder Mode and press the Navigation key to the Right. The following values appear in the camera screen:

•

No Icon

— No icons appear in the viewfinder screen.

•

Icon

— All icons appear in the viewfinder screen.

•

Guideline

— All icons appear along with a crosshatch pattern.

Default Storage

1. In the

Settings

menu, highlight the

Setup

tab, then highlight Default Storage and press the Navigation key to the Right. The following storage options appear in the display:

• My Device

— Stores your photos in phone memory.

•SD Card

— Stores your photos on an optional microSD Storage

Card.

2. Select the memory location setting of your choice. An icon

( or ) appears in the camera screen to indicate where photos will be stored.

Review Screen

1. In the

Settings

menu, highlight the

Setup

tab, then highlight the Review screen and press the Navigation key to the Right. The On/Off options appear.

2. Make your selection to turn the review screen on or off and

press to save your selection.

3. Press to return to the camera viewfinder screen.

Shortcuts

This setting lists the keys you can press to directly access some Camera functions.

䊳

In the

Settings

menu, highlight the

Shortcuts

tab. A

scrollable list of keypad shortcuts appears in the display.

Album — My Pictures

Saved pictures are stored in the My Pictures folder(s) [on your phone and on any optional microSD Storage Card(s)]. You can browse the pictures one at a time (expanded mode), or view several pictures at once in thumbnail format.

1. In camera mode, press Album. Any pictures that you’ve

saved appear in the display.

Page 80

Tip:

You can also access the My Pictures folder from the Home screen, by pressing

Start

, then

, then selecting

Contents Manager

()

Pictures

Storage Card

➔

My Pictures

; or you can use the Jog Wheel to

browse the

Start

menu and select

Contents Manager

()

My Pictures

Storage Card

➔

My Pictures

2. Use the Navigation key to browse pictures in the Album.

3. Press Menu while browsing pictures in the Album. The

following options appear in the display:

•

Send via

— Send a copy of the currently highlighted picture in an

MMS

message, in an

message, or over a

Bluetooth

connection.

•

Set as

— Assign the currently highlighted picture to be wallpaper on the Home Screen or as a Caller ID image for someone in your Contacts list.

•

Delete

— Remove this picture from your Album.

•Edit

— Lets you change this picture with an Editor, Copy/Move this picture to another folder, Rename this picture, create a new pictures folder, compress (Zip) this picture, Select this picture for copy/move/delete, Select All pictures for copy/move/delete.

• Take picture

— Launches the Camera in your phone so that you

can take a new picture.

• Play Slide Show

— Show all of your pictures in this folder, in

series and full-screen.

•Search

— Search for files by name, file Type, and/or Location.

•Sort by

— Re-list the files in this folder in order of their Names,

Dates, Sizes, or Types.

•

Properties

— View the file Name, file Type, Size, Resolution, Folder name, Date and time created, and Protected status of the currently highlighted picture.

• Options

— Select the Album View format, the Zoom Mode, or Slide Show settings. Also, view the keypad Shortcuts list, and version information about the Contents Manager.

4. Select the desired option to perform the function for the

option or enter its sub-menu.

Switch From Expanded to Thumbnail Mode

1. Highlight a picture that you wish to view full size, then

press .

2. To return to the thumbnail view of your photos, press

Camcorder Screen Layout

When you activate your phone’s camcorder, the top line of the display is reserved for camcorder icons (when active). The center of the display shows

Page 81

Camera – Camcorder 78

a viewfinder image of the subject at which the camera lens is pointed.

Camcorder Screen Soft Keys

The soft key labels on the bottom line of the display change to the following:

•

Album

— Pressing the Left soft key opens the

My Videos

folder on the Default Storage location so you can view or manage your stored pictures. See

“Album — My Videos”

on page 82 for more

information.

•

Shortcuts

— Pressing

the Navigation key Up lets you change the

Viewfinder Mode

. Pressssing the Navigation key Down lets you select a self Timer setting. Pressing the Navigation key Left/Right lets you adjust video brightness.

•

— Pressing the Right soft key opens a menu bar of camera

options and settings.

Camcorder Screen Icons

Mode

— Indicates the camcorder is active.

Tip:

To change the Mode setting to Camcorder, press .

Recording Mode

— Video recording duration is limited to

available memory [

Normal

(shown)] or is limited to

1021 KB [

Limit for MMS

()].

Size

— Indicates camcorder’s current resolution value. Available values are 320x240 or 176x144. You can change the camcorder resolution by changing the value of either the

Recording Mode

or the

Size

option. For more

information, refer to “Camcorder Options” on page 79

Default Memory

— Indicates where photos will be stored

[

My Device

(shown) or

SD Card

()].

Recording Time Counter

— Indicates the available

recording time. (Depending on the camera

Size

value.)

Recording Memory Limit

— Indicates the maximum size (in KBytes) for videos to be included in MMS messages. [Shows when

Recording Mode

is set to

Limit for MMS

( ).]

Viewfinder Mode

— Indicates current viewfinder screen format setting [Available options are no icons ( ), all icons (shown), or crosshatch ( )].

Brightness

— Brightens ( ) or darkens ( ) the

image from

-2.0

+2.0

before you take a picture. For

more information, refer to “Brightness” on page 83

Self Timer

— Delays the camera shutter

Off

(shown, 0 seconds) or for 2 (), 5 (), or 10 ( ) seconds after you press .

Page 82

Camcorder Options

The camcorder options let you temporarily adjust default camcorder settings to suit available lighting, the subject of the video, or the purpose of the video, for the current camcorder session. When you exit the camcorder, your camcorder options values revert to their default values.

To access the Camcorder Options menu, do the following:

1. In camera mode, press . The Camcorder viewfinder

screen appears in the display.

2. Press Menu. The Camcorder Options menu appears in the

display.

3. Select a sub-menu, then select a preferred value.

The following sub-sections describe camera options and available values.

Recording Mode

Recording Mode lets you take multiple photos or shots in succession at the touch of a key and/or add colorful frames to your photos.

1. In camcorder mode, press Menu, then highlight /

. The following values appear in the camera screen:

•

Limit for MMS

— Limits your video recordings to a

resolution of 176x144 and a maximum physical size of 1021 KB.

•

Normal

— Lets you record videos only limited by your

Size

value and available memory.

2. Select the desired Recording Mode.

Size

lets you change the clarity (in pixels) of your videos.

1. In camera mode, press Menu, then highlight the

Resolution setting. The following values appear in the camera screen:

•

320x240

(pixels)

•

176x144

(pixels)

2. Select the desired Size value.

White Balance

White Balance allows you to adjust video quality according to available light.

1. In camcorder mode, press Menu, then highlight /

/ / / .

The following values appear in the camcorder screen:

•

Auto

— The camcorder automatically adjusts video quality

to available light.

Page 83

Camera – Camcorder 80

•

Daylight

— Use this setting when recording videos in full

sun.

•

Cloudy

— Use this setting when recording videos in

cloudy conditions.

•

Incandescent

— Use this setting when recording videos

under incandescent lights.

•

Fluorescent

— Use this setting when recording videos

under fluorescent lights.

2. Select the desired White Balance value. The camcorder

viewfinder screen appears in the display with your selected White Balance value applied.

The next time you press , the camcorder applies your selected White Balance value to your video.

Effect

Change the look of your videos with Effect. Choose from eight available settings such as Black&White, Negative, and Sepia. The selected color effect previews in the display before you record the video.

1. In camera mode, press Menu, then highlight / /

/ . The following values appear in the display:

•

No Effect

— Subjects and pictures appear with a normal

hue.

•

Black&White

— Subjects and videos appear in black and

white.

• Sepia

— Subjects and pictures videos in a brownish-gray

hue.

• Negative

— Subjects and videos appear in inverted colors.

2. Select the Effects value of your choice. The camcorder

viewfinder screen appears in the display with your selected Effects value applied.

When you record your next video, the camcorder applies your selected Effects value to your video.

Settings

When you change Camcorder Settings values, your changes are saved for future camcorder sessions, unlike changes to Camcorder Options.

Quality

You can affect how much your video is compressed, thereby reducing it’s overall size (not to be confused with resolution).

1. In the

Settings

menu, highlight the

Camcorder

tab, then

highlight

Quality

and press the Navigation key to the Right.

The following values appear in the camcorder screen:

Fine, Normal, or Economy.

2. Select the desired Quality value.

Audio

1. In the

Settings

menu, highlight the

Camcorder

tab, then

highlight

Audio

and press the Navigation key to the Right.

Page 84

The following values are available: On, or Off.

2. Select the desired Audio value.

Sound Start

Choose enable or disable a sound to play when you begin recording a video.

1. In the

Settings

menu, highlight the

Camcorder

tab, then highlight Sound Start and press the Navigation key to the Right. The following values are available:

•On

•

Off

2. Select the Sound Start value of your choice. You’re

returned to the camcorder viewfinder screen.

Sound Stop

Choose enable or disable a sound to play when you stop recording a video.

1. In the

Settings

menu, highlight the

Camcorder

tab, then highlight Sound Stop and press the Navigation key to the Right. The following values are available:

•On

•

Off

2. Select the Sound Stop value of your choice. You’re

returned to the camcorder viewfinder screen.

Viewfinder Mode

Choose the format for the Camcorder viewfinder screen.

1. In the

Settings

menu, highlight the

Setup

tab, then highlight Viewfinder Mode and press the Navigation key to the Right. The following values appear in the Camcorder screen:

•

No Icon

— No icons appear in the viewfinder screen.

•

Icon

— All icons appear in the viewfinder screen.

•

Guideline

— All icons appear along with a crosshatch pattern.

Default Storage

1. In the

Settings

menu, highlight the

Setup

tab, then highlight Default Storage and press the Navigation key to the Right. The following storage options appear in the display:

• My Device

— Stores your videos in phone memory.

•SD Card

— Stores your videos on an optional microSD Storage

Card.

2. Select the memory location setting of your choice. An icon

( or ) appears in the camcorder screen to indicate where videos will be stored.

Review Screen

1. In the

Settings

menu, highlight the

Setup

tab, then highlight Review Screen. The following values appear in the display:

Page 85

Camera – Camcorder 82

•On — When you record a video, the video appears in the Review

Screen.

–

To save the video, press

Save

–

To discard the photo, press

Cancel

•

Off

— New videos are saved to the My Videos folder automatically.

2. Select the automatic save value of your choice. You’re

returned to the camcorder viewfinder screen.

Shortcuts

This setting lists the keys you can press to directly access some Camcorder functions.

䊳

In the

Settings

menu, highlight the

Shortcuts

tab. A

scrollable list of keypad shortcuts appears in the display.

Album — My Videos

Saved videos are stored in the My Videos folder. You can browse the pictures one at a time (expanded mode), or view several pictures at once in thumbnail format.

1. In Camcorder mode, press Album. Thumbnail images of

any videos that you’ve saved appear in the display.

Tip:

You can also access the My Videos folder from the Home screen, by pressing

Start

, then

, then selecting

Contents Manager

()

Videos

Storage Card

➔

My Videos

or using the Jog Wheel to browse the

Start

menu and select

Contents Manager

()

My Videos

Storage Card

➔

My Videos

2. Use the Navigation key or the Jog Wheel to browse videos

in the Album.

3. Press Menu while browsing videos in the Album. The

following options appear in the display:

•

Send via

— Send a copy of this video in an

MMS

message, in an

message, or over a

Bluetooth

connection.

•

Delete

— Remove this video from your Album.

•Edit

— Lets you Copy/Move this video to another folder, Rename this video, create a new videos folder, compress (Zip) this video, Select this video for copy/move/delete, Select All videos for copy/ move/delete.

•Record video

— Launches the Camcorder in your phone so that

you can record a new video.

• Add to Now Playing List

— Adds this video to the Windows Media

player Now Playing List.

•Search

— Search for files by name, file Type, and/or Location.

•Sort by

— Re-list the files in this folder in order of their Names,

Dates, Sizes, or Types.

•

Properties

— View the file Name, file Type, Size, Resolution, Duration, Date and time created, and Protected status of the currently highlighted video.

• Options

— Select the Album View format, the Zoom Mode, or Slide Show settings. Also, view the keypad Shortcuts list, and version information about the Contents Manager.

Page 86

Select the desired option to perform the function for the option or enter its sub-menu.

Switch From Expanded to Thumbnail Mode

1. Highlight the thumbnail of the video that you wish to view,

then press ( ) to play the video.

2. To return to the thumbnail view of your photos, press

Camera-Camcorder Adjustments

Zoom

Zoom lets you temporarily enlarge the pictures you take. Increasing the Zoom (1 – 5) enlarges your pictures (0 is normal).

䊳

In camera mode, use the Jog Wheel or press the Volume key Up or Down to adjust the Zoom (the screen image enlarges to show the affects of your changes).

The next time you press , the camera takes an enlarged picture according to your selected Zoom setting.

Viewfinder Mode

Choose the format for the Camera/Camcorder viewfinder screen.

1. In camera mode, press the Navigation key Up. The

following values appear in the Camera/Camcorder screen:

•

No Icon

— No icons appear in the viewfinder screen.

•

Icon

— All icons appear in the viewfinder screen.

•

Guideline

— All icons appear along with a crosshatch pattern.

2. Select the desired Viewfinder Mode.

Brightness

Brightness lets you temporarily lighten the pictures you take. Increasing the Brightness (-2.0 – +2.0) lightens your pictures (0 is normal).

䊳

In camera mode, press the Navigation key Left or Right to adjust the Brightness (the screen image lightens or darkens to show the affects of your changes).

The next time you press , the camera takes a lighter or darker picture according to your selected Brightness setting.

Timer

The Timer lets you delay taking a picture long enough to let you join others in a picture.

1. In camera mode, press the Navigator key Down. The

following values appear in the camera screen:

•

— Off.

•

— 2-second delay.

•

— 5-second delay.

•

— 10-second delay.

2. Select a Timer value.

Page 87

Camera – Camcorder 84

The next time you press , the countdown Self Timer indicates the time remaining before the camera takes the picture. The phone reads the countdown timer value to you beginning with two or three and continuing to zero, when the picture is taken.

Tip:

To stop the countdown timer without resetting it, press .

Point, Click, and Send Pictures

Take a picture and send it to anyone with a compatible device in a few easy steps.

1. In camera mode, take a desired picture by pressing or

2. Press Menu, then select

Send via MMS

. The MMS screen

appears in the display with the new photo already inserted.

3. Enter the recipient’s phone number or Email address using

the keypad, or press Menu, then select

Add Recipients

select a recipient. After you select the desired recipients, press

Select

. The

address(es) are added to your message in the

MMS

screen. Use the Jog Wheel or Navigation key to move to the other message fields. For more information, refer to “Messaging” on page 39.

4. When you are finished composing your message, press

Send to send the Picture message to the intended

recipients.

Page 88

Section 10: Multimedia

You can use your i225 phone to take and display pictures, to record and playback videos and sound files (voice memos), and to play compatible video games. This section details how to access your multimedia files and applications.

Windows Media Player

Use Microsoft Windows Media Player® to play digital audio and video files you create and store on your device or download from the Internet. You can play files in either Windows Media (.wma and .wmv) MP3, MP4, or 3GPP2 (.3g2) format.

Loading Media Files

You can load media files to the handset using any of the following methods:

•

Over the air

— Download media files from Internet sites using Internet

Explorer. (For more information, refer to

“Internet Explorer”

page 50.)

•

Via ActiveSync

— Download media files from your PC using the ActiveSync application’s Explore Device Tool. The files are stored in the Local Content folder on the handset after the ActiveSync operation. (For more information, refer to

“Synchronization”

on page 93.)

•

Sideloading

— Copy media files directly from your personal computer

to a microSD Storage Card, then install the card in your i225 phone.

(For more information, refer to

“Installing a microSD™ Storage

Card”

on page 14.)

Updating the Media Library

After you load media files into your i225 phone, you must update the Media Library to access the files, especially “sideloaded” files.

1. From the Home

screen, press

Start

, then select

Windows Media

( ).

•

If the

Library

screen appears, go to Step 2.

•

If the

Windows Media

screen appears, press

, then select

Library

and go to Step 2.

2. Press Menu, then

select

Update Library

. The Update Library screen appears in the display and the search for media files begins.

Page 89

Multimedia 86

When the library has been updated, press

Done

to return to the Library screen. Your media files are now available for playing.

Launch Media Player

1. From the Home

screen, press

Start

then select

Windows

Media

( ).

•

If the

Library

screen

appears, go to Step 2.

•

If the

Windows Media

screen appears, press

, then select

Library

and go to Step 2.

2. Select the desired

folder and media file. The Windows Media player screen appears in the display and the selected media file begins playing.

Media Player Controls

The following settings are available in the media player:

•

To playback to a media file, press the Play (

) key (). The Play icon turns into the Pause icon ( ) once the media file begins playing.

•

During playback:

–

Press the Navigation key Left ( ) to skip back to the beginning of the current file. Press and hold the Navigation key Left to skip backward.

–

Press the Navigation key Right ( ) to skip ahead to the end of the current file. Press and hold the Navigation key Right to skip forward.

Page 90

–

Press the Navigation key Up or Down to adjust playback volume.

•

While paused:

–

Press the Navigation key Left ( ) to play the previous media file in the current folder or Playlist.

–

Press the Navigation key Right ( ) to play the next media file in the current folder or Playlist.

Camera and Video

Your i225 phone includes a camera-camcorder that you can use to take pictures or to record videos. You can also view saved pictures and videos, send them to others as part of MMS messages, and set pictures as Home screen wallpaper.

Launching the Camera

䊳

From the Home screen, press and hold the Camera key ( ) on the lower right side of your phone. The Camera viewfinder screen appears in the display.

For more information, refer to “Taking Pictures” on page 68.

Launching the Camcorder

1. From the Home screen, press and hold the Camera key

( ) on the lower right side of your phone. The Camera viewfinder screen appears in the display.

2. Press . The Camcorder viewfinder screen appears in

the display.

For more information, refer to “Recording Videos” on page 70.

Accessing Pictures and Videos

䊳

From the Home screen, press

Start

, press

, then

select

Contents Manager

() ➔

My Pictures

My Videos

Storage Card

➔

My Pictures

My Videos

•

To view a picture / video, highlight the desired picture / video, then press .

Selecting a video launches the Windows Media player to play the video. For more information, refer to

“Windows Media Player”

page 85.

For more information, refer to “Album — My Pictures” on page 76 or to “Album — My Videos” on page 82.

Games

There are two games included with your i225. These games are listed in the

Games

folder on the

Start

menu. You can download

other games and add these to your

Games

folder by using either

of the following options:

Note:

Games can be downloaded from the Internet and stored on your phone. Instructions from the game download site should inform you of the location (folder) in which to store the application on your phone.

•

Games & Themes

— From the Home screen, highlight

Shortcuts

then select

Buy Games & Themes

•

Internet Explorer

— From the Home screen, highlight

Shortcuts

then

select

Internet Explorer

Page 91

Multimedia 88

Bubble Breaker

1. From the Home screen, press

Start

then select

Games

() ➔

Bubble Breaker

().

2. To begin play, press

New

3. Select

Yes

to confirm the commencement of a new game.

4. Press

and then select

Options

to display the options

screen for the current game.

• Choose from

: Play Sounds, Guest Mode, game Style, and

Breakers.

5. Update your selected options then press or press

Done

to return to the game.

6. Select to exit the current game and return to the

previous screen.

Solitaire

1. From the Home screen, press

Start

then select

Games

() ➔

Solitaire

().

2. Press

and select

New Game

to commence a new

game.

3. Begin play.

4. Select to exit the current game and return to the

previous screen.

Page 92

Section 11: Microsoft Windows Mobile

Microsoft Windows Mobile offers a number of features and functions for using and managing the software on your i225 handset.

Application Management

Your i225 is powered by Windows MobileTM 6.5 Software for i225 Phone Edition, which allows installation and removal of any i225compatible application on your device. i225 applications can be downloaded from the web, or purchased at retail outlets.

Install New Applications (Apps)

You can install any program created for Windows Mobile 6.5, as long as the phone has enough memory. The most popular place to find Apps for your phone is on the Windows phone Marketplace web site (

http://marketplace.windowsphone.com/

Default.aspx

You can also obtain games and themes from your Wireless Provider. Just press

Start

and select

Buy Games & Themes

().

The first application you should install is Microsoft ActiveSync 4.5 or later. You will need this application to install others. You can download the latest version of Microsoft ActiveSync from the

Microsoft site at:

http://www.microsoft.com/windowsmobile/en-us/

help/synchronize/device-synch.mspx

When a new application is downloaded from the web or installed using a CD, the files are transferred to the mobile device via ActiveSync. ActiveSync checks if enough memory is available before installing a program. To free up memory, simply remove old programs or delete unused files. For more information, refer to “Delete an Application” on page 90.

Install Linked Applications

Your i225 phone includes a number of links to application installation packages, including the following:

•

Windows Marketplace

— Lets you find and download Microsoft-

certified applications (apps) for your Windows Mobile phone.

•

Microsoft My Phone

— Lets you back up your phone automatically, easily share photos on social networking sites, access information on your phone online, and locate your phone if it is lost.

•

MSN Money

— Lets you access MSN Money online services web site.

•

MSN Weather

— Lets you view current weather conditions and three-

day forecasts for major cities in your area and elsewhere in the world.

•

bing Search Widget

— Lets you search maps, answers, and local

information.

Page 93

Microsoft Windows Mobile 90

•

Tone Room Deluxe

— Lets you browse, purchase, and download

ringtones.

To install one of these applications:

䊳

From the Home screen, press

Start

and select the desired application, then follow the prompts to complete the installation.

Delete an Application

Some applications are large and take up space on your handset. To help manage space and memory requirements for other software that may need to be installed, you can delete any application not required for your device to operate correctly. To delete an application:

1. From the Home screen, press

Start

, then select

Settings

() ➔

More... ➔ Remove Programs

2. Select the program from the list and press

, then select Remove. For more information, refer to “Remove Programs” on page 116.

3. Select Yes to confirm.

4. Press

Done

to save your changes and return to the

previous screen.

Task Manager

Windows MobileTM 6.5 includes a mobile version of Task Manager that lets you review the applications running on your handset and, if needed, stop them running.

1. From the Home

screen, press

Start

then select

Accessories

()

➔

Task Manager

( ). The

Task

Manager

screen

displays.

2. To end a task,

highlight the task and press

End Task

3. Press

to access the following options:

•Switch To

: switches to and displays the selected application.

• End All Tasks

: ends all the tasks that are running.

•View

: Allows you to view Applications or Processes.

•Sort By

: Allows you to sort how applications are viewed, by

Memory, CPU, or Name.

•Refresh

: Refreshes the screen display.

•Exit

: Exits the Task Manager screen.

Page 94

Rebooting your Phone after Lockup

The End key ( ) lets you quickly turn off the phone in the event of a program or application error. In this case your phone would appear to “freeze” and become unresponsive.

1. Press and hold until the power off animation appears

in the display.

2. Press and hold until the power on animation appears

in the display.

Note:

This restart action is similar to that of a “cold reboot” action on a computer. Your phone’s temporary memory is cleared, but information in permanent storage remains unchanged.

Resetting your Phone to Factory Defaults

Note:

To completely remove any personal information stored on your device, see “Precautions for Transfer and Disposal” on page 146.

You can reset your phone’s settings and clear all data/ applications from phone’s internal memory by using the

Hard

Reset

option. This option resets your phone to its factory default settings, ends all applications currently running, and wipes all data (pictures/video/contacts) from your phone.

Note:

Although this action wipes all information and settings from your i225, you can circumvent the deletion of important data by storing it on a removable microSD storage card.

1. From the Home

screen, press

Start

then select

Settings

() ➔ More ➔

Security ➔

Phone

Reset

. The

Phone

Reset

screen

displays.

2. To reset your phone’s

settings, enter the Password and press

Done

. A

confirmation screen displays.

3. Press

to remove all settings and data stored in your

device.

4. Cycle power to the phone, that is, turn the power off and

then on again.

5. Follow the on screen tutorials and complete the setup

process.

Page 95

Microsoft Windows Mobile 92

Performing a Manual Hard Reset

Caution!:

When performing a manual Hard Reset, the storage and settings initialize.

1. With the device powered off, press and hold to begin

the power on sequence.

2. Press and hold the

Left soft key ( ) and . The

User

Storage Format

screen appears in the display.

3. Select

Format and

Reboot

[SCH-i225 User Storage Format]

--Warning-All data will be erased.

Please press key within 5 secs

1. Format and Reboot

2. Exit

Page 96

Section 12: Synchronization

This section describes how to synchronize the data on your phone with data on one of the following:

•

Your Microsoft Windows desktop computer, using Microsoft®

ActiveSync® or Windows Mobile® Device Center® (depending on your personal computer operating system).

•

A server running Microsoft Exchange Server® with Exchange

ActiveSync®.

Synchronization compares the data on your phone with your desktop computer or server and updates both your phone and computer or server with the latest data.

Note:

Access the Microsoft web site (http://www.microsoft.com/

windowsmobile/en-us/help/synchronize/default.mspx) to download Active

Sync 4.5 or later, or Windows Mobile Device Center 6.1 or later.

Active Sync (Windows XP or earlier)

With ActiveSync, you can:

•

Keep Contacts, Calendar, Tasks, and/or Inbox data up-to-date by

synchronizing your phone with Microsoft Outlook® data on your desktop computer and/or a server running Microsoft Exchange Server® with Exchange ActiveSync®.

•

Copy (rather than synchronize) files between your phone and desktop

computer.

•

Control the moment when synchronization occurs by selecting a

synchronization mode.

•

Select data types to be synchronized and control the amount of

synchronized data.

ActiveSync – System Requirements

To use ActiveSync 4.5 your computer must meet the following hardware and software requirements:

•

Vista, Microsoft Windows XP, Windows 2000, Windows Millennium

Edition, or Windows NT Workstation 4.0 with SP6 or later.

•

Microsoft Internet Explorer 6.0 or later.

•

Hard-disk drive with 12 to 65 MB of available hard-disk space (actual

requirements will vary based on selection of features and user's current system configuration).

•

USB port (1.0 or higher).

•

A CD-ROM drive.

•

VGA or compatible video graphics adapter at 256 colors or more.

Installing Microsoft ActiveSync® on your computer

Before beginning synchronization, you must install Microsoft ActiveSync on your computer.

1. Insert the Getting Started CD into the computer’s CD drive.

Page 97

Synchronization 94

Click the Setup and Installation link from the on-screen disc menu.

3. Click the Install button to begin installation.

Tip:

You can also download the latest version of ActiveSync from the Microsoft web site,

http://www.microsoft.com/windowsmobile/en-us/help/

synchronize/default.mspx.

Important!:

If the ActiveSync option is grayed out, the application is already installed. Un-install any previously installed version before completing this installation.

4. Launch the setup program and follow the instructions on

the screen. When installation completes, the Synchronization Setup Wizard connects your phone to the computer, to set up a partnership.

Note:

When installation completes, the ActiveSync icon displays on the task bar.

Note:

Synchronization automatically begins the first time your device is connected to your computer. All the selected synchronization items are copied from your computer to your device, and Windows Explorer creates a shortcut to the Mobile drive

Connecting Your Phone to a Computer

To connect the phone to your computer, you can choose one of the following ways:

•

Using a USB data cable

•

Using a Bluetooth connection

Using a USB data cable

Connect one end of the USB data cable to the jack on the bottom of the phone and the other end to the USB port on your computer.

Note:

Your phone must be set for Microsoft® ActiveSync® to use a USB connection. Select

Start

➔

ActiveSync

➔

Connections...

then select

Synchronize all PCs using this connection

and set

USB

The connection is established and the Microsoft® ActiveSync® window displays. The synchronization automatically begins.

Setting Up and Configuring ActiveSync

1. After you’ve installed ActiveSync, connect one end of the

USB data cable to the jack on the upper right side of your

Page 98

phone and the other end to a USB port on your computer.

Your computer assigns a different profile to each device that is connected to it through the ActiveSync application.

2. Select

to setup the sync partnership between the PC

and your device.

3. Enter a unique name for your device and click

4. Select or deselect the desired applications that you wish to

synchronize, then click

Incorrect

Correct

Page 99

Synchronization 96

Click the square to allow wireless data connections on your device while connected to your computer. If selected a checkmark will display in the box.

6. Click

Finish

7. The i225 and the PC should perform the first ActiveSync.

This may take some time, depending on the amount of information that needs to be synchronized.

Connecting using Bluetooth Wireless Technology

To use ActiveSync® via Bluetooth wireless technology, you need to configure the settings for both your PC and your handset.

PC Configuration

1. Add a COM port in the Bluetooth application you use on

your PC.

2. In ActiveSync, select

File

➔

Connection Settings

. The

Connection Settings

window pops-up.

3. Check

Allow connections to one of the following:

, then

choose the COM port added in Step 1.

Page 100

PDA Configuration

1. Establish a Bluetooth connection between your device and

your PC.

2. If your PC has Bluetooth ActiveSync functionality, select

ActiveSync

Partnership Settings

3. On your phone, from the Home screen, select

Start

➔

ActiveSync

4. Press

, then select “

Connect via Bluetooth

.”

Customizing Connection Settings

To establish a connection between your computer and the phone, you must enable the connections you want to use in the ActiveSync® program. By default, all connections are enabled.

1. From the ActiveSync

window on your computer, select

File

➔

Connection Settings

...

2. Change the connection settings.

Note:

If your phone is not connected to the computer, click this button to establish a connection.

3. Click on

Synchronizing Information

Synchronizing Your Phone With Your PC

To begin synchronization, connect your phone to your computer using a USB data cable or via Bluetooth. The

Microsoft ActiveSync

window on your computer automatically displays and synchronization starts.

Once the synchronization is completed, the phone stays connected to the computer. If any change is made, Microsoft ActiveSync automatically will begin synchronization.

To begin synchronization manually on your phone.

䊳

From the Home screen, select

Start

➔

ActiveSync

, then

press

Sync

You can open the phone’s file directory from your PC by clicking

Explore

in the

Microsoft ActiveSync

window. You can then copy

If your phone is not connected to the computer, click this button to establish a connection.