Samsung EV-OCA 90W NEO User Manual

ENGLISH

• This camera will not function without a battery.

• Use one 3V lithium battery(CR-123A or DL-123A).

• The lens cap automatically opens when the Power button is turned on.

• Do not open the lens cap with your fingers.

The shutter does not operate in the following circumstances:

• When the camera has no battery or when the battery is almost drained.

• When the Power is turned off.(When the lens cap is closed.)

• When the zoom button is operating or when the film is winding or rewinding. (Rewinding will stop when the power button is pressed during rewinding.)

• When the film remains in the camera after rewinding.

• When the flash is being charged.

This camera is controlled electronically by a built-in microcomputer. Although unlikely, it may fail to operate under certain circumstances in which there is a strong electromagnetic field (near a TV, microwave etc.). If this occurs, please remove the lithium battery and replace after 2~3 minutes.

NOTE

CONTENTS

Part names

.................................................................................

LCD panel

...................................................................................

Viewfinder and Indicators

...........................................................

Loading the battery

.....................................................................

Checking the battery

.................................................................

Loading the film

.........................................................................

Attaching the strap

....................................................................

Using the camera

.......................................................................

Holding the camera

..................................................................

Taking pictures

..........................................................................

Adjusting the diopter

.................................................................

Buzzer operation

.......................................................................

Rewinding the film

....................................................................

Date and caption (Q.D. model only)

........................................

Using the flash mode

................................................................

Using the shooting mode

.........................................................

Using the self mode

..................................................................

Auto red-eye reduction

.............................................................

Auto flash

..................................................................................

Fill-in flash

.................................................................................

Fill-in flash and red-eye reduction

............................................

Flash off

.....................................................................................

Spot shooting

............................................................................

Continuous shooting

.................................................................

Landscape shooting

.................................................................

Bulb shooting(B Shutter)

..........................................................

Snap shooting

...........................................................................

Step zoom

.................................................................................

Portrait zoom

.............................................................................

Using the focus lock

..................................................................

Self-timer

...................................................................................

Double self-timer

.......................................................................

2 second delayed shutter release

............................................

Remote control shooting(Optional)

..........................................

Replacing the battery of the remote control(Optional)

..................

Panorama photography

............................................................

Care and storage

......................................................................

Trouble shooting

.......................................................................

Checking the camera

...............................................................

PREPARATION

TAKING PHOTOS

IMPORTANT NOTES

SPECIFICATIONS

Thank you for purchasing the SAMSUNG camera. Please read this manual before using your camera.

TABLE OF CONTENTS

PART NAMES

Front / Top

Lens

Viewfinder

Power button

Autofocus window

Flash Self-timer lamp

PREPARATION

Remote control sensor

(Q.D. Model only)

Exposure sensor

Shutter button

Rear / Bottom

Autofocus indicator(Green LED)

Flash indicator(Red LED)

Viewfinder

Diopter adjustment dial

Tripod socket

Mid-roll rewind button

LCD panel

Mode dial

Buzzer ON/OFF button

Film check window Strap eyelet

Back cover release button

Self mode button

DATE or TIME button

(Date and Caption selection button)

Flash button (Flash mode selection button)

Normal/Panorama switch

Zoom Button(WIDE) Zoom Button(TELE)

Interior

Film sensor

DX contacts

Back cover Film pressure plate

Film pressure roller Spool

LCD PANEL

Flash mode

Caption Letter indicator

Month Year

Exposure unit(EX) Film rewinding indicator

Film present indicator Film loading indicator

Film loading failure warning indicator(E)

Back-cover open indicator

Battery condition indicator

Buzzer indicator

Remote control shooting Date or caption print mark

Focal length unit(mm)

Seconds(s) when Bulb mode

Self-timer( )

Double self-timer( )

2 sec. delayed shutter release( )

Focal length

Exposure counter

Date(Year, Month, Date, Time)

VIEWFINDER AND INDICATORS

Close range picture area mark

- WIDE : Optimum picture area when shoot within 0.6m~1.5 m

- TELE : Optimum picture area when shoot within 0.7m ~ 2m Picture area frame

- WIDE : Optimum picture area when shoot over 1.5 m

- TELE : Optimum picture area when shoot over 2m Autofocus frame (Focus on the subject with this frame)

Indicators

1. Autofocus Indicator (Green LED) When illuminated this confirms that conditions are suitable for picture taking. When the subject is too close, (within 0.6m (1.97ft), the LED will blink rapidly and the shutter will lock. (Refer to page 17 for information of buzzer operation)

2. Flash Indicator (Red LED) Illuminates when the flash is fully charged. (In low light conditions) Blinks rapidly when the flash is being charged. (Shutter will be locked) It blinks quickly if you are out of the range. Blinks slowly to indicate that the camera requires steady support (preferably a tripod) to avoid camera shake.

Viewfinder

Green

Red

LOADING THE BATTER Y

1. Open the chamber cover by sliding the battery chamber cover.

2. Insert a new battery and ensure it is placed in the correct position.

3. Close the chamber cover.

NOTE

Use one CR-123A or DL-123A battery. The camera will automatically turn the power off when not used after 3 minutes.

Remove the battery from the camera when the camera is not used for an extended period.

Be sure to check the date and shooting mode when you load a new battery. If the date or time is incorrect, please refer to page 19 and adjust accordingly.

2 1

CHECKING THE BATTER Y

NOTE

Do not remove the battery while the camera is operating, because it may cause the camera to malfunction. Battery performance is reduced in low temperatures (under -10 (14 ));Try to keep the camera warm between shots. (The battery will operate normally again when the temperature returns to normal). Please dispose of the exhausted battery with care. Some local authorities may require batteries to be disposed of separately from other refuse.

1. Normal operation

- The battery condition indicator does not appear.

2. The indicator appears half way.

- The battery life is low and you should ensure that a replacement battery is available.

3. The indicator blinks.

- The battery is exhausted. Load a new battery.

You can check the battery life on the LCD panel

LOADING THE FILM

1. Open the back cover by sliding the release knob as shown above.

2. Insert a roll of film in the chamber. Do not force the film into position.

3. The film should lie flat.

4. Close the back cover. It will close with a “click”.

5. The film will automatically advance until the film counter reads “1”.

6. If a film is loaded incorrectly, the LCD panel will display an “E” warning signal. (Refer to page 17 for information of buzzer operation) Reload the film following the steps shown above.

NOTE

The camera automatically adjusts for ISO 50-3200 DX film. When you use non-DX film, the camera will set the film speed at ISO 100. Load the film in subdued lighting.

2 1

ATTACHING THE STRAP

Refer to the illustrations above.

USING THE CAMERA

Press the Power button to turn the power on. The indicators will appear on the LCD panel.

If the camera is not used for 3 minutes, the power will be turned off automatically.

While looking through the viewfinder, aim the camera at the subject and operate the zoom buttons. Press the (Tele) button to move the lens out and press the (Wide) button to move the lens in . During this operation, the LCD panel shows the focal lengths in the following sequence : 28, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90 mm.

HOLDING THE CAMERA

In order to avoid camera shake, hold the camera steady, especially when using longer focal lengths (Tele).

Place the camera strap over your wrist. Both elbows (horizontal picture) or one elbow (vertical picture) should be held close to your body. Keep your eye close to the viewfinder when using the camera. This ensures correct framing. Ensure you can see all four sides of the viewing frame when composing your shot.

NOTE

Avoid obstructing the lens when you take a picture. Pictures can be spoiled when a finger, hair or camera strap falls in front of the Lens, Exposure Sensor or Auto-focus Windows. When you take vertical pictures with flash, the flash should be above the lens.

Aim the Autofocus frame at a subject.(Refer to page 8)

Press the Shutter button half way down. The lens is focused when the green lamp turns on. Press the Shutter button all the way down to take a picture. The film will automatically advance after shooting and the frame counter will advance. Exposure range (WIDE) : 0.6m ~ (TELE) : 0.7m ~

NOTE

When the flash is being charged, the flash indicator ( ) on the LCD panel blinks and the shutter will not operate. When the Red LED blinks slowly, use a tripod or support the camera to avoid camera shake. In order to avoid camera shake, hold the camera steadily and press the Shutter button gently, particularly when using longer focal lengths.(Tele) After taking pictures, turn off the camera. This will protect the lens and prevent unintended shots. (If not used for 3 minutes, the camera will turn off automatically). Should a subject be closer than 0.6m, the LED will blink rapidly to indicate that the subject is too close and the shutter will lock. Under certain circumstances, the autofocus system will be over-ridden. The camera will then function, even though the subject is too close. Some examples of this are :

- A low contrast and bright subject

- Strong light directed towards the camera

- The subject is closer than 0.3m

TAKING PICTURES

+ 33 hidden pages