This user manual includes detailed usage
instructions for your camera. Please read
this manual thoroughly.
Click a topic
Basic troubleshooting
Quick reference
Contents
Basic functions
Extended functions
Shooting options
Playback/Editing
Wireless network
(ST200F/ST201F/ST205F only)
Settings
Appendixes
Index
Health and safety information
Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera.
Warning—situations that could cause injury to yourself or
others
Do not disassemble or attempt to repair your camera.
This may result in electric shock or damage to the camera.
Do not use your camera near flammable or explosive gases and
liquids.
This may cause a fire or explosion.
Do not insert flammable materials into the camera or store these
materials near the camera.
This may cause a fire or electric shock.
Do not handle your camera with wet hands.
This may result in electric shock.
1
Prevent damage to subjects’ eyesight.
Do not use the flash in close proximity (closer than 1 m/3 ft) to
people or animals. If you use the flash too close to your subject’s
eyes, this can cause temporary or permanent eyesight damage.
Keep your camera away from small children and pets.
Keep your camera and all accessories out of the reach of small
children and animals. Small parts may cause choking or serious
injury if swallowed. Moving parts and accessories may present
physical dangers as well.
Do not expose the camera to direct sunlight or high
temperatures for an extended period of time.
Prolonged exposure to sunlight or extreme temperatures can
cause permanent damage to your camera’s internal components.
Health and safety information
Avoid covering the camera or charger with blankets or clothes.
The camera may overheat, which may distort the camera or
cause a fire.
Do not handle the power supply cord or go near the charger
during a thunderstorm.
This may result in electric shock.
If liquid or foreign objects enter your camera, immediately
disconnect all power sources, such as the battery or charger,
and then contact a Samsung service center.
Comply with any regulations that restrict the use of a camera in
a certain area.
• Avoid interference with other electronic devices.
• Turn off the camera when in an aircraft. Your camera can cause
interference with aircraft equipment. Follow all airline regulations
and turn off your camera when directed by airline personnel.
• Turn off the camera near medical equipment. Your camera can
interfere with medical equipment in hospitals or health care
facilities. Follow all regulations, posted warnings, and directions
from medical personnel.
Avoid interference with pacemakers.
Maintain a minimum of 15 cm between this camera and all
pacemakers to avoid potential interference, as recommended by
the manufacturer and the independent research group, Wireless
Technology Research. If you have any reason to suspect that your
camera is interfering with a pacemaker or other medical device,
turn off the camera immediately and contact the manufacturer of
the pacemaker or medical device for guidance.
2
Health and safety information
Caution—situations that could cause damage to your camera
or other equipment
Remove the batteries from your camera when storing it for an
extended period of time.
Installed batteries may leak or corrode over time and cause
serious damage to your camera.
Use only authentic, manufacturer-recommended, Lithium-ion
replacement batteries. Do not damage or heat the battery.
Inauthentic, damaged, or heated batteries may cause a fire or
personal injury.
Use only Samsung-approved batteries, chargers, cables and
accessories.
• Using unauthorized batteries, chargers, cables or accessories
can cause batteries to explode, damage your camera, or cause
injury.
• Samsung is not responsible for damage or injuries caused by
unapproved batteries, chargers, cables or accessories.
Use the battery only for its intended purpose.
Misusing the battery may cause a fire or electric shock.
Do not touch the flash while it fires.
The flash is very hot when fired and may burn your skin.
When you use the AC charger, turn off the camera before you
disconnect the power to the AC charger.
Failing to do so may result in fire or electric shock.
Disconnect the charger from the wall socket when not in use.
Failing to do so may result in fire or electric shock.
Do not use a damaged power supply cord, plug, or loose outlet
when you charge batteries.
This may cause a fire or electric shock.
Do not allow the AC charger to come in contact with the +/terminals on the battery.
This may cause a fire or electric shock.
3
Health and safety information
Do not force the camera’s parts or apply pressure to the
camera.
This may cause your camera to malfunction.
Exercise caution when you connect cables or adapters and
install batteries and memory cards.
If you force the connectors, improperly connect cables, or
improperly install batteries and memory cards, you can damage
ports, connectors, and accessories.
Keep cards with magnetic strips away from the camera case.
Information stored on the card may be damaged or erased.
Never use a damaged charger, battery, or memory card.
This may result in electric shock or camera malfunction or cause
a fire.
Check that the camera is operating properly before use.
The manufacturer takes no responsibility for any loss of files or
damage that may result from camera malfunction or improper
use.
You must plug the small end of the USB cable into your camera.
If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.
Avoid interference with other electronic devices.
Your camera emits radio frequency (RF) signals that may interfere
with unshielded or improperly shielded electronic equipment,
such as pacemakers, hearing aids, medical devices, and
other electronic devices in homes or vehicles. Consult the
manufacturers of your electronic devices to solve any interference
problems you experience. To prevent unwanted interference, use
only Samsung-approved devices or accessories.
Use your camera in the normal position.
Avoid contact with your camera’s internal antenna.
Data transference and your responsibilities
• Data transferred via WLAN could be leaked, so avoid
transferring sensitive data in public areas or on open networks.
• The camera manufacturer is not liable for any data transfers that
infringe on copyrights, trademarks, intellectual property laws, or
public decency ordnances.
4
Outline of the User Manual
Copyright information
• Microsoft Windows and the Windows logo are
registered trademarks of the Microsoft Corporation.
• Mac is a registered trademark of the Apple Corporation.
• microSD™, microSDHC™, and microSDXC™ are
registered trademarks of the SD Association.
• Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo
are registered trademarks of the Wi-Fi Alliance.
• Trademarks and trade names used in this manual are
the property of their respective owners.
• Camera specifications or contents of this manual may
be changed without prior notice due to upgrade of
camera functions.
• We recommend using your camera within the country
where you purchase it.
• Use this camera responsibly and adhere to all laws
and regulations concerning its use.
• You are not allowed to reuse or distribute any part of
this manual without prior permission.
• For Open Source License information, refer to the
‘OpenSourceInfo.pdf’ in the provided CD-ROM.
Basic functions 13
Learn about your camera’s layout, icons, and basic
functions for shooting.
Extended functions 36
Learn how to capture a photo and record a video by
selecting a mode.
Shooting options 55
Learn how to set the options in Shooting mode.
Playback/Editing 78
Learn how to play back photos or videos, and edit
photos or videos. Also, learn how to connect your
camera to your computer, photo printer, or TV.
Wireless network (ST200F/ST201F/ST205F only) 102
Learn to connect to wireless local area networks
(WLANs) and use functions.
Settings 123
Refer to options to configure your camera’s settings.
Appendixes 129
Get information about error messages, specifications,
and maintenance.
5
Icons used in this manual
IconFunction
Additional information
Safety warnings and precautions
Camera buttons. For example, [Shutter] represents the
[ ]
shutter button.
( )Page number of related information
The order of options or menus you must select to
perform a step; for example: Select Face Detection→
→
Normal (represents Select Face Detection, and then
select Normal).
*Annotation
Expressions used in this manual
Pressing the shutter
• Half-press [Shutter]: Press the shutter halfway down
• Press [Shutter]: Press the shutter all the way down
Subject, background, and composition
• Subject: The main object in a scene, such as a person,
animal, or still life
• Background: The objects around the subject
• Composition: The combination of a subject and background
Background
Composition
Subject
Exposure (Brightness)
The amount of light that enters your camera determines the
exposure. You can alter the exposure with shutter speed,
aperture value, and ISO sensitivity. By altering the exposure,
your photos will be darker or lighter.
Half-press [Shutter]Press [Shutter]
6
Normal exposure
Overexposure (too bright)
Basic troubleshooting
Learn to solve common problems by setting shooting options.
The subject’s eyes
appear red.
Photos have dust
spots.
Photos are blurred.
Photos are blurred
when shooting at
night.
Subjects come out
too dark because of
backlighting.
Red eye occurs when the subject's eyes reflect light from the camera flash.
•
Set the flash option to Red-eye or Red-eye Fix. (p. 59)
•
If the photo has already been captured, select Red-eye Fix in the edit menu. (p. 92)
If dust particles are present in the air, you may capture them in photos when you use the flash.
•
Turn off the flash or avoid capturing photos in a dusty place.
•
Set ISO sensitivity options. (p. 61)
Blurring can occur if you capture photos in low light conditions or hold the camera incorrectly.
Use the OIS function or half-press [Shutter] to ensure the subject is focused. (p. 34)
As the camera tries to let in more light, the shutter speed slows. This can make it difficult to hold the
camera steady long enough to capture a clear photo and may result in camera shake.
•
Select Night Shot mode. (p. 47)
•
Turn on the flash. (p. 59)
•
Set ISO sensitivity options. (p. 61)
•
Use a tripod to prevent your camera from shaking.
When the light source is behind the subject or when there is a high contrast between light and dark
areas, the subject may appear too dark.
•
Avoid shooting toward the sun.
•
Select Backlight in Scene mode. (p. 41)
•
Set the flash option to Fill in. (p. 59)
•
Adjust the exposure. (p. 69)
•
Set the Auto Contrast Balance (ACB) option. (p. 70)
•
Set the metering option to Spot if a subject is in the center of the frame. (p. 70)
7
Quick reference
Capturing photos of people
•
Picture in Picture mode 44
•
Beauty Shot mode 45
•
Intelligent Portrait mode 46
•
Red-eye/Red-eye Fix (to prevent or correct
59
red-eye)
•
Face Detection 65
•
Self-Portrait 66
Capturing photos at night or in
the dark
•
Scene mode > Sunset, Dawn 41
•
Night Shot mode 47
•
Flash options 59
•
ISO sensitivity (to adjust the sensitivity to light)
61
Capturing action photos
•
Continuous, Motion Capture 73
Capturing photos of text,
insects, or flowers
•
Scene mode > Text 41
•
Close-up Shot mode 47
•
Macro 62
Adjusting the exposure
(brightness)
•
ISO sensitivity (to adjust the sensitivity to light)
61
•
EV (to adjust exposure) 69
•
ACB (to compensate for subjects against bright
backgrounds)
•
Metering 70
•
AEB (to capture 3 photos of the same scene
with different exposures)
70
73
Capturing photos of scenery
•
Scene mode > Landscape 41
•
Live Panorama mode 42
Applying effects to photos
•
Magic Frame mode 48
•
Funny Face mode 48
•
Photo Filter mode 49
•
Split Shot mode 52
•
Artistic Brush mode 53
•
Motion Photo mode 54
•
Image Adjust (to adjust Sharpness, Contrast,
or Saturation)
91
Applying effects to videos
•
Movie Filter mode 51
8
Reducing camera shake
•
Optical Image Stabilization (OIS) 33
•
Viewing files by category in Smart Album 81
•
Viewing files as thumbnails 82
•
Deleting all files on the memory 83
•
Viewing files as a slide show 86
•
Viewing files on a TV 94
•
Connecting your camera to a computer 95
•
Using photo or video sharing websites
(ST200F/ST201F/ST205F only)
•
Sending photos or videos via email
(ST200F/ST201F/ST205F only)
Declaration sentence in official languages ................156
Index ...........................................................................158
12
Basic functions
Learn about your camera’s layout, icons, and basic functions for shooting.
Unpacking
Camera layout
Inserting the battery and memory card
Charging the battery and turning on
your camera
Performing the initial setup
Learning icons
Using the Home screen
………………………………… 14
……………………………… 15
………………………………… 18
Charging the battery
Turning on your camera
Accessing the Home screen
Icons on the Home screen
Setting Wallpaper
……………………… 18
………………… 18
……………… 19
……………………………… 21
…………………… 22
……………… 23
………………………… 25
……………… 22
… 17
Selecting options or menus
Setting the display and sound
Setting the display type
Setting the sound
Capturing photos
Zooming
………………………………… 31
Reducing camera shake (OIS)
Tips for getting a clearer photo
……………… 26
…………………… 28
………………………… 29
………………………… 30
…………… 28
…………… 33
…………… 34
Unpacking
The following items are included in your product box.
Optional accessories
CameraAC adapter/
USB cable
Rechargeable batteryStrap
User Manual CD-ROMQuick Start Guide
Basic functions
14
Camera caseA/V cable
Battery chargerMemory card/
•
The illustrations may differ slightly from the items shipped with
your product.
•
The items included in the box may differ depending on the model.
•
You can purchase optional accessories at a retailer or a Samsung
service center. Samsung is not responsible for any problems
caused by using unauthorized accessories.
Memory card adapter
Camera layout
Before you start, familiarize yourself with your camera’s parts and their functions.
Shutter button
Flash
AF-assist light/Timer lamp
Tripod mount
Microphone
Basic functions
POWER button
Speaker
Lens
Internal antenna*
* Avoid contact with the internal antenna
while using the wireless network.
(ST200F/ST201F/ST205F only)
USB and A/V port
Accepts USB cable and A/V cable
Battery chamber cover
Insert a memory card and battery
15
Camera layout
Status lamp
•
Blinking: When the camera is saving
a photo or video, being read by a
computer or printer, when the image
is out of focus, or there is a problem
charging the battery (On ST200F/
ST201F/ST205F, when the camera is
connecting to WLAN or sending a photo)
•
Steady: When the camera is connected
to a computer, charging the battery, or
when the image is in focus
ButtonDescription
Access the Home screen.
Access options or menus.
Enter Playback mode.
Delete files in Playback mode.
Display
Buttons
(See the table below)
ButtonDescription
Basic functionsOther functions
Change the display option.Move up
Change the macro option.Move down
Change the flash option.Move left
Change the timer option.Move right
Confirm the highlighted option or menu.
Zoom button
•
In Shooting mode: Zoom in or out
•
In Playback mode: Zoom in on part of
a photo or view files as thumbnails, or
adjust the volume
Attaching the strap
Basic functions
16
Inserting the battery and memory card
Learn how to insert the battery and an optional memory card into the camera.
Removing the battery and memory card
Memory card
Insert a memory card with the
gold-colored contacts facing
up.
Push the card gently until it
disengages from the camera,
and then pull it out of the slot.
Battery lock
Memory card
Rechargeable battery
Insert the battery with the
Samsung logo facing up.
Basic functions
Push the lock up to release
Rechargeable battery
You can use the internal memory for temporary storage if a memory card is
not inserted.
17
the battery.
Charging the battery and turning on your camera
Charging the battery
Before you use the camera for the first time, you must charge the
battery. Plug the small end of the USB cable into your camera,
and then plug the other end of the USB cable into the AC
adapter.
Status lamp
•
Red light on: Charging
•
Red light off: Fully charged
•
Red light blinking: Error
Use only the AC adapter and USB cable supplied with your camera. If you
use another AC adapter (such as SAC-48), the camera battery may not
charge or work properly.
Basic functions
Turning on your camera
Press [POWER] to turn your camera on or off.
• The initial setup screen appears when you turn on the camera
for the first time. (p. 19)
Turning on your camera in Playback mode
Press [ ]. The camera turns on and immediately accesses
Playback mode.
If you turn on your camera by pressing and holding [ ] until the status lamp
blinks, the camera does not emit any sounds.
18
Performing the initial setup
When you turn on your camera for the first time, the initial setup screen appears. Follow the steps below to configure the camera’s basic
settings.
Verify that Language is highlighted, and then press
1
[ ] or [].
Press [/ ] to select a language, and then
2
press [].
Press [ ] to select Time Zone, and then press
3
[ ] or [].
Basic functions
Press [/ ] to select Home, and then press [].
4
•
When you travel to another country, select Visit, and then
select a new time zone.
Press [ / ] to select a time zone, and then press
5
[] → [].
Time Zone : Home
London
CancelSet
•
The screen may differ depending on the language selected.
19
Performing the initial setup
Press [ ] to select Date/Time Set, and then press
6
[ ] or [].
Date/Time Set
Year
Month Day
Hr MinDST
CancelSet
•
The screen may differ depending on the language selected.
Press [ / ] to select an item.
7
Press [/ ] to set the date, time, and daylight-
8
saving time, and then press [].
Basic functions
Press [ ] to select Date Type, and then press
9
[ ] or [].
Press [/ ] to select a date type, and then
10
press [].
Press [ ] to select Time Type, and then press
11
[ ] or [].
Press [/ ] to select a time type, and then
12
press [].
Press [] to finish the initial setup.
13
20
Learning icons
The icons the camera displays on the screen change according to the mode you select or the options you set.
1
Shooting options (left)
IconDescription
Shooting mode
Exposure value adjusted
ISO sensitivity
White balance
Face detection
Face tone
Burst option
1
2
Shooting options (right)
IconDescription
Intelli zoom on
2
Photo resolution
Video resolution
Metering
3
Frame rate
Flash
Sound Alive on
Optical Image Stabilization (OIS)
Auto focus option
Image adjustment (sharpness,
contrast, and saturation)
Timer
3
Shooting information
IconDescription
Current date
Current time
Available number of photos
Memory card inserted
•
: Fully charged
•
: Partially charged
•
: Empty (Recharge)
Aperture value
Shutter speed
Available recording time
Auto focus frame
Camera shake
Zoom indicator
Photo resolution when the
Intelli zoom is on
Zoom ratio
Basic functions
21
Using the Home screen
You can select a shooting mode or access the settings menu by selecting the icons on the Home screen.
Accessing the Home screen
In Shooting or Playback mode, press [ ]. Press [ ] again to
return to the previous mode.
Movie
1
2
AlbumWi-Fi
Smart Auto
Scene
Back
Program
Live
Panorama
Basic
Smart Movie
Settings
Page Move
Basic functions
No.Description
Current Home screen
•
Rotate [Zoom] to the left or right to switch to another
Home screen.
1
•
Press [] to scroll to the Home screen name, and
then press [
•
Press [ / ] repeatedly to switch to another Home
screen.
Mode icons
2
•
Press [/ / / ] to scroll to a desired mode, and
then press [
22
/ ] to switch to another Home screen.
] to access the mode.
Using the Home screen
Icons on the Home screen
<Basic>
IconDescription
Smart Auto: Combine a self shot with a background image
to make one photo. (p. 37)
Program: Capture a photo with settings you have adjusted
manually. (p. 38)
Smart Movie: Record a video with a scene mode selected
automatically by the camera. (p. 39)
Movie: Record a video. (p. 40)
Scene: Capture a photo with options that are preset for a
specific scene. (p. 41)
Live Panorama: Capture and combine a series of photos
to create a panoramic image. (p. 42)
Settings: Adjust settings to match your preferences.
(p. 124)
Basic functions
<Wi-Fi> (ST200F/ST201F/ST205F only)
IconDescription
MobileLink: Send photos or videos to a smart phone.
(p. 107)
Remote Viewfinder: Use a smart phone as a remote
shutter release and see a preview on your smart phone of
an image from your camera. (p. 108)
Social Sharing: Upload photos or videos to file sharing
websites. (p. 110)
Email: Send photos or videos stored on the camera via
email. (p. 112)
Cloud: Upload photos to a cloud server. (p. 115)
Auto Backup: Send photos or videos that you captured
with the camera to a PC wirelessly. (p. 116)
TV Link: View photos or videos that you captured with the
camera on a widescreen TV. (p. 118)
23
Using the Home screen
<Scene>
IconDescription
Picture in Picture: Capture a background photo and insert
a smaller photo or video into the foreground. (p. 44)
Beauty Shot: Capture a portrait with options to hide facial
imperfections. (p. 45)
Intelligent Portrait: Save 2 additional portraits
automatically using the face detection functions. (p. 46)
Night Shot: Capture a night scene by adjusting shutter
speed. (p. 47)
Close-up Shot: Capture close-up photos of subjects.
(p. 47)
Basic functions
<Magic>
IconDescription
Magic Frame: Capture a photo with various frame effects.
(p. 48)
Funny Face: Capture a photo with funny face effects.
(p. 48)
Photo Filter: Capture a photo with various filter effects.
(p. 49)
Movie Filter: Record a video with various filter effects.
(p. 51)
Split Shot: Capture several photos and arrange them with
preset layouts. (p. 52)
Artistic Brush: Capture a photo and save a video that
shows how to apply the filter effect. (p. 53)
Motion Photo: Capture and combine a series of photos,
and then select an area to be animated to create a
GIF animation. (p. 54)
<Album>
IconDescription
Album: View files by category in Smart album. (p. 81)
Photo Editor: Edit photos with various effects. (p. 91)
24
Using the Home screen
Setting Wallpaper
Set wallpaper for the Home screen with the desired image.
On the Home screen, scroll to <Basic>.
1
Select .
2
Select Display→Wallpapers.
3
Select an option.
4
OptionDescription
Wallpaper Gallery
Album
Select the desired wallpaper from the default
gallery.
Set a photo you have captured as wallpaper.
Scroll to the desired wallpaper, and then press [].
5
•
If you select a photo you have captured, you can set a
specified area as wallpaper. Rotate [Zoom] to the left or right
to reduce or enlarge the area. Press [
move the area.
Press [] to save.
6
You can also set the photo you are viewing as wallpaper by pressing
[
], and then selecting Set Wallpaper in Playback mode.
/ / / ] to
Basic functions
25
Selecting options or menus
To select an option or a menu, press [], and then press [/ / / ] or [].
In Shooting mode, press [].
1
Select an option or a menu.
2
•
To move up or down, press [] or [ ].
•
To move left or right, press [ ] or [ ].
Press [] to confirm the highlighted option or menu.
3
Basic functions
Going back to the previous menu
Press [] to go back to the previous menu.
Half-press [Shutter] to return to Shooting mode.
26
Selecting options or menus
For example, to select a White Balance option in
Program mode:
On the Home screen, scroll to <Basic>.
1
Select .
2
Press [].
3
EV
White Balance
ISO
Flash
Focus
Focus Area
ExitSelect
Basic functions
Press [/ ] to select White Balance, and then
4
press [ ] or [].
EV
White Balance
ISO
Flash
Focus
Focus Area
ExitSelect
Press [ / ] to select a White Balance option.
5
White Balance : Daylight
BackSelect
Press [] to save your settings.
6
27
Setting the display and sound
Learn how to change the basic display information and sound settings.
Setting the display type
You can select a display type for the Shooting or Playback mode.
Each type displays different shooting or playback information.
See the table below.
Press [] repeatedly to change the display type.
Mode
Shooting
Playback
Display type
•
Hide all information about shooting options.
•
Show all information about shooting options.
•
Hide all information about the current file.
•
Hide all information about the current file except
basic information.
•
Show all information about the current file.
Basic functions
Setting the option display view
You can hide or show the option display appearing in some
modes.
Press [] repeatedly.
• Hide the option display.
• Show the option display.
Landscape
Option display
Paneloff
▲ For example, in Scene mode
28
Setting the display and sound
Setting the sound
Turn on or off the sound your camera emits when you perform
functions.
On the Home screen, scroll to <Basic>.
1
Select .
2
Select Sound→Beep Sound.
3
Select an option.
4
Option
Off
On
Description
The camera does not emit any sounds.
The camera emits sounds.
Basic functions
29
Loading...
+ 133 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.