4. Array course control
Test Jig (GH80-03307A)
Test Cable (GH39-00483A)
RF Test Cable (GH39-00397A)
4-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Array course control
Software Downloading
4-1. Downloading Binary Files
1) Three binary files for E570
-E570XXYY.s3
4-2. Pre-requsite for Downloading
●
Downloader Program (OptiFlash.exe)
●
E570 Mobile Phone
●
Data Cable
●
Binary files
4-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Array course control
4-3. S/W Downloader Program
1. Load the binary download program by executing the "
OptiFlash.exe"
2. Select the
Options -> Settings -> Generic -> Specify hardware platform
Choose hardware platform for the downloader file setting.
Set the everything else as the default values which are shown below
.
4-3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Array course control
3. Select the
COM port
when the download cable is connected
Up to twelve ports are supported. Additionally you can select the
maximum transfer speed OptiFlash will use to communicate with
the phone. However, OptiFlash will use a slower speed if either the
PC's or the phone's serial hardware is incapable of handling the
selected speed
4-4
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Array course control
4. Select the
Flash&Verify -> Browse
Set the directory path and choose the latest
s/w binary, for example
E570XXYY.s3 for the downloader binary setting.
Make sure that not to change the reserved memory
regions.
In case of E570 the reserved regions are :
-
0x23fe0000 - 0x23ffffff
4-5
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Array course control
5. Click "OK" button then press "
(Before pressing "Flash" button, push the button
. Then press "Flash".)
time
Flash"
"*" and "END" at the same
Downloader will upload the binary file as below for the downloading.
6. When downloading is finished successfully, there is a "All is well"
message.
7. After finishing downloading, Certain memory resets should be done to
guarantee the normal performance.
8. Confirm the downloaded version name and etc. :
*#1234#
Full Reset :
*2767*3855#
4-6
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Loading...