Samsung DW80F600UTB/AA-00, DW80F600UTW/AA-01, DW80F600UTW/AA-00, DW80F600UTS/AA-01, DW80F600UTS/AA-00 Owner’s Manual

...

the possibilities

Thank you for purchasing this Sannsung product

To receive more complete service. please register your product at

www.samsung.com/register

f¢a_tuF¢¢of }/ouF

NOW

ca_mcuncj

Your new Samsung Dishwasher will change the way you feel about doing

dishes. From its extra large capacity to its energy efficiency, your new Samsung dishwasher has the features you need to take the humdrum out of washing

dishes.

1, Elegant design with digital touch sensors

Your dishwasher features digital touch sensors in the control panel for simpler operation with a touch of elegance.

2. Increased convenience

The smart auto cycle determines the level of soil on the dishes and initiates the optimal cycle for cleaning. Use this feature to save water, energy, and time.

3, Extremely quiet operation

Efficient noise control technology gives you the quietest possible operation. Your new

Samsung dishwasher is quieter than ever.

4. Self-cleaning filter

Cleaning the filter yourself is a thing of the past! This product keeps food waste internally while operating, then drains it automatically with the water.

5. Twin fan condensing drying

Two fans connected to one motor make for better drying performance. Still better, your dishwasher emits no hot steam. Instead, it mixes external fresh air with the internal hot steam during drying to eliminate the steam, making your dishwasher safer and easier to use.

This manual contains important information regarding the use and care of your new Samsung

dishwasher. Refer to it for descriptions of the control panel, instructions on how to use the dishwasher, and tips for making the most of its state-of-the-art features and technologies. The cycle chart on page 22 offers an overview of the different cycles and the troubleshooting section on page 23 tells you what to do if something goes wrong.

2 featur'es of your ' new samsung dishwasher '

,s f ty information

Throughout this manual, you'll see Warning Z_ and Caution Z_ notes. These

important safety instructions do not cover all possible situations that might occur. It isyour responsibility to use caution when installing, maintaining, and operating

your dishwasher. Samsung will not be liable for any damage resulting from

improper use. IMPORTANT SAFETY INSTRUCTIONS

What the icons and signs in this user manual mean :

Z_ Hazards or unsafe practices that may result in severe personal injury or

WARNING

Z_ Hazards or unsafe practices that may result in personal injury or property

CAUTION damage.

CAUTION using your dishwasher, follow these basic safety precautions:

_] Do NOT touch.

{_ Follow directions explicity.

WARNING - When using the dishwasher, follow basic precautions, including the following:

[_ Read all instructions before the dishwasher.

As with any equipment using electricity, water, and moving parts, potential hazards exist. Use the dishwasher only for its intended function.

Use only detergents or wetting agents recommended for use in a dishwasher, and keep them out of the reach of children.

When loading items to be washed:

Do not wash plastic items unless they are marked "dishwasher safe" or the equivalent. For plastic items not so marked, check the manufacturer's recommendations.

_Do not during or immediately use.

death.

To reduce the risk of fire, explosion, electric shock, or personal injury when

Do NOT attempt.

Do NOT disassemble.

Unplug the power plug from the wall socket.

Make sure the machine is grounded to prevent electric shock.

Call the service center for help.

using

Locate sharp items so that they are not likely to damage the door seal, and Load sharp knives with the handles up to reduce the risk of cut-type injuries.

touch the HEATING ELEMENT after

SAVE THESE INSTRUCTIONS

safety info_'mation 3

,s fe,ty information

Do not operate the dishwasher unless all ENCLOSURE panels are properly in place. Do not tamper with the controls.

Do not abuse, sit on, or stand on the door, lid, or dish racks of the dishwasher. To reduce the risk of injury, do not allow children to play in or on the dishwasher.

To reduce the risk of fire or explosion:

Under certain conditions, hydrogen gas may be produced in a hot water system

that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If you have not used your hot water system for two weeks or more, before using the

dishwasher, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.

Remove the door to the washing compartment when removing an old dishwasher from service or discarding it.

After unpacking the dishwasher, keep the packaging out of the reach of children. The dishwasher is extremely heavy. Do not attempt to move or carry the dishwasher by

yourself. Two or more people are needed to move a dishwasher and avoid potential injuries. Do not install the dishwasher near electrical components. Keep the dishwasher away from

open flames. Install and level your dishwasher on an uncarpeted floor that can support its weight. Your dishwasher must be properly grounded. Never connect it to an ungrounded outlet.

See page 11 for more information on grounding your dishwasher. Connect the ground wire to the green ground connector in the terminal box. After the dishwasher is installed, check that the drain hose is properly connected and

that there is no leakage from the hose connectors. If the drain hose is loose, it may cause property damage.

The water supply line is susceptible to breakage. As time goes by, it becomes less flexible. Check the line periodically. If it is swollen, torn, cut, or there is a water leak, replace it immediately.

To safely operate this appliance, familiarize yourself with its operations and exercise care when using it.

Do not put gasoline, solvents, or other flammable materials inside the dishwasher. Do not wash dishes exposed to these materials.

Keep your dishwasher detergent out of the reach of children. Detergent has an adverse effect on human organs. It contains elements for polishing and is corrosive. Avoid letting the detergent come into contact with your skin and eyes.

Do not push or place pressure on the door when it is open, as this may damage the dishwasher or cause harm.

Do not allow children to play in or on the dishwashen They may harm themselves or damage the dishwasher.

Disconnect the power cable (or set the circuit breaker to off) before servicing your

dishwasher.

4 safety info_'mation

SAVE THESE INSTRUCTIONS

Do not repair, replace, or service any part of your dishwasher yourself. Disassembly, repairs and modifications are permitted by authorized service technicians only. Work done by an unauthorized person may void your warranty.

Before disposing of your dishwasher, remove the door of the washing compartment or the door latch so that children or small animals do not get trapped inside.

If the dishwasher is left unused for an extended period of time, turn off the water supply. This dishwasher is intended for residential use only.

BEFORE USING YOUR DISHWASHER

Z_ WARNING

WARNING

Do not use the dishwasher until it is correctly installed.

_! _ Tip-Over Hazard

Do not push down on an open door. Do not place excessive weight on the open door.

Electric Shock Hazard Failure to follow these instructions can result in death, fire, or electric shock:

Electrically ground the dishwasher Connect the ground wire to the green ground connector in the junction box.

Do not use an extension cord.

State of California Proposition 65 Warnings:

WARNING

The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances known to the State of California to cause cancer,

birth defects, or other reproductive harm, and requires businesses to warn of potential exposure to such substances. This product contains a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm. This appliance can cause low-level exposure to some of the substances listed, including benzene, formaldehyde, and carbon monoxide.

SAVE THESE INSTRUCTIONS

safety information 5

c ont nt,

SETTING UP YOUR DISHWASHER 7 Unpacking your dishwasher

7 Checking parts

8 Control panel 10 Cycle selector 10 Progress lights

11 Meeting installation requirements

USING YOUR DISHWASHER

CLEANING AND MAiNTAiNiNG YOUR

DISHWASHER

CYCLES

TROUBLESHOOTING 23 Check these points if your dishwasher...

APPENDIX 27 Helping the environment

12 Basic guidelines for operation 14 Removing the plate support 15 Adjusting the height of the upper rack 15 Removing the upper rack 16 Loading the lower rack 16 Loading the upper rack 17 Using the cutlery basket 18 Using the dispenser

20 Cleaning the exterior 20 Cleaning the interior 20 Cleaning the nozzles 21 Storing your dishwasher

22 Cycle chart

26 Information codes

27 Specifications

6 Conter}ts

Be sure to have your installer follow these instructions closely so that your new dishwasher works properly and that you're not at risk of injury when washing

dishes. UNPACKING YOUR DISHWASHER

o Once your new dishwasher has been delivered to you, carefully unpack it and check for any damage.

If the dishwasher has been damaged, make note of it on the waybill and keep a copy. Do not install the dishwasher, and contact Samsung Customer Service at the number listed below.

o If there is no damage to the product, you can proceed with the installation. If you are going to install it

yourself, make sure to read through the installation guide and follow the directions inside. After unpacking your dishwasher, keep the packaging out of the reach of children to ensure their safety.

CHECKING PARTS

When your dishwasher has been unpacked, make sure you've received all the parts shown below.

If your dishwasher was damaged during shipping, or ifyou do not have all the parts, contact Samsung

Customer Service at 1-800-SAMSUNG (726-7864)

Lower nozzle

Air

Base

Door|_

Middle nozzle

Upper rack Lower rack

Accessory parts - manual,

User/installation Installation Kit.

)or vent cover

Control panel

Cutlery rack

setting up your dishwasher 7

CONTROL PANEL

DW80F600 Series

[ ........... -c_2 ............ option

II ,, .....,oo,.....

When you press the Power button, the entire display turns on and off, and then the light of the most recently finished cycle lights up.

When the cycle you selected has finished, all other indicator lights are turned off and the "Clean" light is illuminated for 10 minutes.

Then, the Power turns off automatically.

Select the appropriate wash cycle depending on the soil level of your dishes. After you select a cycle, the Cycle On light for that cycle lights up.

If you want to cancel the selected cycle, press the selected cycle button again.

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

The temperature rises to 162 °F (72 °C) in the final rinse cycle for high temperature sanitization.

If you select the Sanitize option, the "Sanitize" lamp blinks when the water temperature reaches the sanitary temperature (over 155 °F (68 °C)), and then remains illuminated until the Sanitze option ends. When you open the door

or press the Power button, the "Sanitize" lamp turns off.

_You cannot select the Delicate cycle if you select the Sanitize option.

The Sanitize feature operates in accordance with NSF/ANSI Standard

184 for Residential Dishwashers. Certified residential dishwashers are not intended for licensed food establishments. Your dishwasher is NSF Certified.

The cycle that is NSF certified is the Heavy Cycle with the sanitize option selected.

This option allows you to lock the buttons on the control panel so children cannot accidently start the dishwasher by pressing the buttons on the panel.

To lock and unlock the buttons on the control panel, hold the Child Lock button down for three (3) seconds.

- When Power is On : Hold down the Child Lock button for three (3)

seconds.

- When Power is Off : Push the Power button first, and then hold down

the Child Lock button for three (3) seconds.

' _ 3hr. ', • e_r.

8 setting up your dishwasher

Delay a cycle for up to 24 hours in one-hour increments. The hour displayed indicates the time at which the wash will be started.

Displays wash information, Delay Start hours, and Error messages. If an error occurs during an operation, an error message is displayed with a

warning sound. Refer to the information codes page. (see page 26)

When Low rinse remains illuminated, there is no rinse agent in the dispenser.

Refill the rinse aid dispenser.

To start the cycle, press the Start/Drain button before closing the door. To cancel a cycle currently running and drain the dishwasher, hold down

both the Start/Drain buttons for three (3) seconds.

[_} ou can select Sanitize option before starting a cycle. If you change the cycle after selecting an option,

the original cycle is reset.

setting up your _dishwasher 9

CYCLE SELECTOR

DW80F600 Series

Cycle

mart Autol Normal I Heavy I Delicate

" " 1

This cycle detects the level of soil and automatically initiates the optimal cycle after a few minutes of operation.

Use this cycle for regular dinner dishes.

Use this cycle for heavily soiled dishes and dishes with heavy soil.

Use this cycle for normally soiled dishes or fragile items such as glasses.

PROGRESS LIGHTS

DW80F600 Series

When the dishwasher is in a wash or rinse portion of a cycle, the Wash light is illuminated.

When the dishwasher is in a drying portion of a cycle, the Dry light is illuminated.

After the dishwasher has completed all portions of a cycle, all other indicator

lights are turned off and the Clean light is illuminated for lO minutes. If you open the door when the Clean light is illuminated, it turns off

immediately.

When the dishwasher starts a cycle, the light corresponding to the current operation turns on to show the progress of the cycle. When that portion of the cycle is complete, the illuminating light turns off.

10 setting up your _dishwasher _

MEETING iNSTALLATiON REQUIREMENTS

Electrical supply and grounding

To prevent the risk of fire, electric shock, or personal injury, all wiring and grounding must be

done in accordance with the National Electrical Code ANSI/FNPA, No. 70 Latest Revision and local codes and ordinances. It is the personal responsibility of the appliance owner to provide adequate electrical service for this appliance.

/_k Never use an extension cord.

....... When preparing for installation, ensure that your power supply provides:

o An individual branch circuit serving only your dishwasher with a 120 Volt, 60Hz, 15 AMP fuse

or circuit breaker.

Your dishwasher must be grounded. If your dishwasher malfunctions or breaks down, grounding will reduce the risk of electric shock by providing a path of least resistance for the electric

current.

Z_ Never connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.

WARNINe

GROUNDING INSTRUCTIONS

For a permanently connected appliance:

This appliance must be connected to a grounded metal, permanent wiring system, or an

equipment-grounding conductor must be run with the circuit conductors and then connected to

the equipment-grounding terminal or lead on the appliance.

Water supply

The hot water supply line pressure must be between 20-120 psi (140-830 kPa). Adjust the water heater to deliver water between 120°F (49°C) - 149 °F (65 °C).

[_ ost plumbing supply stores sell water supply lines of various lengths up to 10 feet (305

cm) long. You can reduce the risk of leaks and water damage by:

o Making water faucets easily accessible.

Turning off faucets when the dishwasher is not in use. Periodically checking for leaks at water supply line fittings.

Before using your dishwasher for the first time, check all connections at the water supply valve

......._ and faucets for leaks.

Flooring

For safety, your dishwasher must be installed on a solidly constructed floor. Never install your dishwasher on a platform or poorly supported structure.

Your dishwasher must be properly installed in accordance with the Installation Guide before you use it. If you did not receive an Installation Guide with your dishwasher, you can obtain one by visiting our website at www.samsung.com.

setting up your dishwasher 11

BASIC GUIDELINES FOR OPERATION

t. Open the door and load your dishes (see page 16).

Place dishes into the upper and lower racks, unless you have selected half load. Remove any food remains from the dishes before placing them in the rack(s).

After placing the dishes into the racks, rotate the nozzles by hand to check whether any of the

dishes will interfere with them. Make sure the dishes will not prevent the detergent dispenser from opening.

2. Add detergent to the dispenser (see page 18). Make sure to use only automatic dishwasher detergent. Refer to "Using the dispenser" on how to add detergent.

3. Close the door. Push the racks back so that they are in place, and then close the door.

Make sure to close the door firmly. Ifthe door is slightly ajar, the selected cycle will not start automatically

4. Touch the Power button.

When you press the Power button, the entire display turns on and off, and then the cycle light of the

most recently finished cycle lights up. If "Low Rinse" is illuminated, you should refill the rinse aid dispenser to improve washing and drying

performance.

5. Select an appropriate cleaning cycle depending on the soil level of the dishes. (see pages 10 and 22).

Touch the appropriate cycle button. When you touch a cycle button, the cycle indicator light is illuminated. If you touch the cycle button

again, the light turns off and the cycle is canceled. For information about selecting a cycle according to the soil level of the dishes, see "Cycle

Selector".

6. Touch the Start/Drain button.

The dishwasher will start draining after a few seconds, and then start the cycle you selected.

7. When the wash cycle is completed.

The Clean light illuminates and the dishwasher sounds a chime. The power is automatically turned off after 10 minutes.

If you want to load more dishes or pause the dishwasher while it is already running, make sure to open

CAUTION

the door slowly and carefully as there is a possibility of injury from the hot steam inside the dishwasher.

(If the door is opened while the dishwasher is running, a safety mechanism is activated and stops the cycle.)

You should use rinse aids for better drying performance. You can further improve drying performance

by also selecting the Sanitize option.

If the "Low rinse" lamp lights during a cycle, the dishwasher adds 30 more minutes to the Drying cycle automatically after the Clean light illuminates.

When the water temperature of the last rinse of the sanitize option reaches the sanitary temperature

(over 155 °F (68 °C)), the Sanitize lamp blinks, and then remains illuminated until the Sanitze option ends. When you open the door or press the Power button, the "Sanitize" lamp turns off.

12 using your_dishwasher

Touch controls

Touch controls allow you to operate the dishwasher easily.

o They are convenient to operate, requiring only a soft touch. o Have a simple and stylish design. o Are easyto clean. If you have children or you want to clean the Control interface, we recommend activating

the Child Lock feature to lock the control buttons.

Children will not be able to accidently start the dishwasher by touching the controls with this option selected.

If a cycle is running, the buttons will not respond. (except the Power button) If dishwasher is off, only the Power button responds.

Z_ Do not wash the following items

WARNINe

Acrylic of Aluminum items: Dishes with printed gold rim decoration may become discolored.

Dishes treated with adhesive: Treated plastics, wood, ivory, copper, and tin may come loose.

Plastics with a temperature tolerance less than 194 °F (90 °C) : Thin plastics wash and

dry poorly, and may be damaged due to elevated wash temperatures. Tin: Tin should be washed by hand and dried immediately as it may rust. Wooden utensils: Wooden items may crack.

Z_ When using the dishwasher, try to arrange the dishes properly as described on page 16.

WARNINe

You should remove food remains such as bones, fruit seeds, etc. and any other waste such as toothpicks, paper, etc. from the dishes as these may cause damage to the dishes, create

noise, or cause the dishwasher to malfunction.

Select the appropriate cycle depending on the level of soil and the type of dishes.

Use only the proper amount of detergent and rinsing agent.

using your dishwasher 13

REMOVING THE PLATE SUPPORT

You can adjust the angle of the tines in the upper rack to three different positions to match the size and shape of your dishes. To adjust the tines, grasp the handle at the back of the rack and push it left or right. See the illustration below.

In the lower rack, you can easily remove the plate support to make room for large items such as pots and pans. To remove the plate support, lift up the handles (A). To refit the plate support, align it so it is in place, and then push down on the handles (A). To fold down the fold-down tines on the lower rack, remove the rack from the dishwasher, turn the rack over, grasp the tine (B), and then adjust it backward. See the

illustration below.

Upper rack

Lower rack

14 using your' dishwasher

ADJUSTING THE HEIGHT OF THE UPPER RACK

You can adjust the height of the upper rack in your Samsung dishwasher so that the lower rack can accommodate larger sized dishes. Depending on where you set the upper rack height, the lower rack can accommodate plates up to 14 in. (36cm) in diameter and the upper rack can accommodated plates up to

12 in. (30cm)in diameter.

DW80F600 Series

To adjust the height of the upper rack, follow these steps:

1. Remove the upper rack following the directions in Removing the Upper Rack below.

2. If you want to lower the upper rack, re-install the rack as shown in ......

Figure A to the right.

3. If you want to raise the upper rack, re-install the rack as shown in Figure B to the right.

Z_ We recommend adjusting the height of the upper rack before loading

....... dishes into the rack. If you adjust the the rack after loading the

dishes, you may damage the dishes.

REMOVING THE UPPER RACK

Pull the upper rack towards the front and then remove it by lifting it up slightly and pulling it towards the

front. See the illustrations below.

Z_ While the upper rack is removable, it must be installed for the dishwasher to operate properly.

....... If you attempt to operate the dishwasher without the rack, noise will occur and the dishwasher will

perform poorly.

i ilili IS' !i

Step t.

Step 2.

using your dishwasher 15

LOADING THE LOWER RACK

Load cookware (pots, pans, etc.), up to 14 in. (36 cm) in diameter into the lower rack. The lower rack has

been especially designed for dinner dishes, soup bowls, plates, pots, lids, casserole dishes, and plates.

Load your plates into the center column of the rack so their open sides face towards the right. Load large items such as pans and pots into the dishwasher so their open sides face downwards. We recommend loading cups, stemware, and small plates into the upper rack.

See the recommended loading patterns below.

8 place setting 10 place setting t2 place setting

LOADING THE UPPER RACK

The upper rack has been designed for small plates, mugs, glasses, and plastic items marked "dishwasher safe". Load your plates into the dishwasher so their open sides faced each other.

Make sure the loaded dishes do not interfere with the rotation of the nozzle which is located at the bottom of the upper rack. (Check this by rotating the nozzle by hand.) When loading dishes, pull the upper rack out sufficiently so you can load it without striking the counter

above.

8 place setting 10 place setting t2 place setting

Using the glass support

You can load cups or glasses onto the glass support. This is also very convenient for washing wine glasses. Hang your wine glasses

onto the pegs of the glass support.

You can fold the glass support back when it is not being used.

16 using your dishwasher

DW80F600 DDS1-01555A-01 EN.indd Sec4:16 2013-06-04 CC 11:26:54 I

Loading the large items

You can load large items such as pans and pots into the lower rack,

Make sure pot handles and other items do not interfere with rotation of

the nozzles.

USING THE CUTLERY BASKET

The cutlery basket consists of two compartments. You can place each knife, spoon, or fork separately into the spoon stands in the basket's covers to prevent

chipping and discoloration.

_DO NOT let item extend the bottom.

any

through

(_ Small forks (_ Spoons

(_ Knives

Large spoons and forks

(1_ Medium-sized forks

Remaining items

Suggested arrangement for a 12 place setting

The spoon stands as seen from above with the suggested placement of cutlery items. Match the numbers

in the diagram to the numbers in the list of cutlery items above.

_%q:Tt ._i __,

!!,Il,,1

)

', 2", (.2" (.21

1",,ri_"gI'"t"<

c-i".._i7t_,..7{.7; 7

You can use the cutlery basket with the cover open. Refer to the

illustration to the right.

};7;i

DW80F600 DDS1-01555A-01 l_N.indd Sec4:17

using your dishwasher 17

2013-06-04 CC 11:26:57 I

USING THE DISPENSER

Filling the detergent dispenser

t. Open the cover by pushing the cover latch downwards.

Add the recommended amount of detergent to the main wash dispenser. See the table below.

Close the dispenser cover. You will hear a 'click' when it is closed correctly.

4. When you select the Heavy cycle, add the recommended amount of detergent to the pre-wash dispenser. See the

table below.

The cover opens automatically to dispense the detergent during the wash.

Main wash dispenser Pre-wash dispenser

Normal, DeNcate,Smart Auto 0.5 oz (15g) No detergent

Heavy 0.7 oz 20 g 0.2 oz 5 g

[_The numbers inside the dispenser refer to grams.

18 using your dishwasher

DW80F600 DDS1-01555A-01 EN.indd Sec4:18 2013-06-04 CC 11:26:59 I

Filling the rinse aid dispenser

Your dishwasher has been designed to use liquid rinse aid.

use a

[_The of rinse aid the after the final rinse.

1. Turn the dispenser knob counterclockwise to open the cover.

greatly improves drying performance

2. Pour rinse aid into the opening until the indicator points to

"MAX." Avoid overfilling the dispenser.

3. Adjust the amount of rinse aid released during the rinse

operation. You can choose one of four levels (1-4). The higher the

number, the larger the amount of rinse aid released. The

factory default is 3. When the rinse dispenser is filled up, it is good for about 40

washes.

4. Close the cover. Turn the dispenser knob clockwise.

Z_ We strongly recommended using only liquid rinse aid.

CAUTION

overfilling the

DW80F600 DDS1-01555A-01 EN.indd Sec4:19

using your dishwasher 19

2013-06-04 CC 11:26:59 I

m int ning

©UF

Keeping your dishwasher clean improves its performance, reduces unnecessary repairs, and lengthens its life.

CLEANING THE EXTERIOR

It's best to clean spills on the outside of your dishwasher as they occur. Use a soft, damp cloth on the

control panel to gently wipe away spills and dust. Do not use benzene, wax, thinner, chlorine bleach, or alcohol. These materials may discolor the inner walls and cause stains. Do not clean the dishwasher by sprinkling water over it and avoid letting water come into contact with any of the electrical parts.

lf your dishwasher has a stainless steel door panel, you can clean it with a stainless steel cleaner for Home Appliances or similar product using a clean, soft cloth.

CLEANING THE iNTERiOR

Clean the interior of your dishwasher periodically to remove any dirt or food particles. Wipe the inside of the dishwasher and the inner part of the door with a wet dishcloth. We recommend filling the detergent dispenser with dish detergent, and then running the dishwasher empty periodically using either the Normal or Quick cycle with the sanitize option. This will keep your dishwasher clean.

If white spots and odor are still present in your dishwasher, run the Normal cycle with the dishwasher empty

and without detergent until it flushes. Then, interrupt the cycle and put an 8 ounce cup of white vinegar into the lower basket. Close the dishwasher and let the cycle finish.

Z_ Do not remove the tub front seal (the long rubber seal enclosing the opening of the dishwasher).

CAUTION

CLEANING THE NOZZLES

If your dishwasher does not seem to be cleaning adequately or the nozzles seem clogged, you can clean

each of the nozzles. When removing the nozzles, take care as they may break.

Lower nozzle

t. Check whether the nozzle holes are

clogged by food particles.

2. If cleaning is needed, remove the nozzle by pulling it upwards.

3. Clean the nozzle, and then push it back into place.

4. Check whether the nozzle is engaged

correctly by rotating it by hand.

20 cleaning and maintaining

DW80F600 DDS1-01555A-01 £N.indd Sec5:20 2013-06-04 cC 11:27:00 I

Middle nozzle

1. Pull the upper rack towards the front and remove it.

2. Check whether the nozzle holes are

clogged by food particles.

3. If cleaning is needed, remove the nozzle.

4. To remove the nozzle, unfasten and remove the nut, and then remove the

nozzle.

5. Clean the nozzle, re-insert it, and fasten

the nut.

6. When fastening the nut, turn it firmly by hand.

7. Check whether the nozzle is engaged

correctly by rotating it by hand.

Upper nozzle

1. Check whether the nozzle holes are

clogged by food particles.

2. If cleaning is needed, remove the nozzle.

3. To remove the nozzle, pull out the upper rack first, unfasten the nozzle cap by

turning it counterclockwise, and then

remove the upper nozzle.

4. Clean the nozzle, re-insert it, and then

fasten the nozzle cap to the nozzle by turning the cap clockwise.

5. Check whether the nozzle is engaged

correctly by rotating it by hand.

STORING YOUR DISHWASHER

If you need to store your dishwasher for an extended period of time, first drain and disconnect it. If you leave water in the hoses and internal components, you can damage the dishwasher.

After draining and disconnecting the dishwasher, be sure to turn off the water supply valve and circuit

breaker.

DW80F600 DDS1-01555A-01 £N.indd Sec5:21

cleaning and maintaining 21

2013-06-04 _7 11:27:00 I

CYCLE CHART

( ÷: Basic, O: Flexible step)

Norma! @

Heavy

Delicate ÷ ÷

Smart @ 0 0 @ @

Auto 122 _, 138 _F 138 _F (59 °C) (13.7 25.2)

o The numbers in parentheses in the Last Rinse column represent the temperature when you select

Sanitize.

113 F (45_0)

@ @

118 145°F 0 @ 136- 149°F @ (11.7 27.2)

(48 - 63 "C) 162 °F (72 'C)

@ ÷

140 °F (60 "C) 158 °F (70 °C)

122 °F (50 "c)

@ @ 3.6 6.7

(50 59 "C) 162 °F (72 'C)

@ @ @ @ 8.6 (32.5) 152

@ @ 5.0(18.8) 117

(SS - 65 'C)

162 °F (72 'C)

140 °F (60 °C)

3.1 7.2 106 _ 143

107 _ 138

o When you select the Smart Auto or Normal cycle, you can eliminate the 0 (flexible) steps depending on

the soil level of the dishes. The wash time varies depending on the steps or options you add, and on the pressure and temperature

of the supplied water.

22 cycles

DW80F600 DDS1-01555A-01 EN.indd Sec6:22 2013-06-04 _C 11:27:00 I

tzo Abe,,shoot

CHECK THESE POINTS iF YOUR DISHWASHER...

ii i i iii

Will not starL The power cable is not connected.

_ r.! g Oo_a"n t V long Cold water is being supplied.

It,s

with an operation or

Cycle:

There are food used.

particles remaining on dishes.

(Not cleaning properly,)

il i_i _i i _ iiI ii ii ii ii ii ii ii i

The door is net closed completely. Check that the door is latched and closed

No cycle is selected.

The water supply does net work. The Control Panel is locked.

A circuit breaker is open.

You selected an inappropriate

cycle.

The water temperature is low.

Low water pressure.

The water is toe hard.

Dishwasher detergent was net

Detergent remains in the dispenser.

There is no rinse aid.

A nozzle is clogged. The dishes are improperly loaded.

Tee many dishes have been

loaded.

completely. Select a proper cycle. Connect the power cable properly. Check that the water supply valve is open.

Unlock the child lock, (See page 9.) Reset the circuit breaker.

Check that the water supply line is connected to a hot water supply.

(Additional time is required to heat cold water.)

Select a cycle according to the number and soil level of the dishes, as directed in this

manual. Connect the water supply line to a hot

water supply.

For best performance, the temperature of

the supplied water should be 120 °F(49 °C). The water pressure should be between 20

and 120 psi (140 - 830 kPa).

Use a commercial dishwasher cleaner. Use high-quality, fresh detergent with rinse

aid.

Use automatic dishwasher detergent.

We recommend a powder or gel type dishwasher detergent.

Make sure large items such as cookie sheets, cutting boards, or contaners, etc. are not blocking the detergent dispenser and preventing it from opening properly.

Rearrange the dishes so they do net interfere with detergent dispenser operation.

Check the dispenser and add the rinse aid.

Use liquid type rinse aid. Clean the nozzle. See page 20.

Rearrange the dishes so they do net interfere with nozzle rotation and detergent dispenser operation.

Load only an appropriate number of dishes.

Load your dishes as recommended. (See page 16.)

DW80F600 DDS1-01555A-01 £N.indd Sec7:23

troubleshooting 23

2013-06-04 CC 11:27:01 I

tZ LAb , hootiN

Leaves glasses with much detergent was used.

a dim polish: Aluminum dishes were included in

Leaves a yellow This is caused by coffee and tea

or brown film on soils. the inside of the

dishwasher.

Does not dry dishes

Has a bad odor.

Is too noisY. Foreign material (a screw, a plastic

The water supplied is soft and too

the wash load.

There is no rinse aid in the

dispenser.

The temperature of the water

is low when the dishwasher is running.

Too many dishes have been

loaded.

Glasses and cups with concave bottoms hold water. This water

may spill onto other items when unloading.

Water was left over from an

incomplete cycle.

The Drain Hose is obstructed.

The dishwasher is not used daily

or soiled dishes are left in unit too long.

Soundisgeneratedwhenthe

dispenser cover is open and the drain pump is operating in an early

stage.

The dishwasher is not level.

piece) is in the pump chamber.

There is a 'chopping' sound

because a nozzle is bumping against the dishes.

Underload the dishwasher and use a rinse aid to minimize this.

Remove the marks on the dishes using a low sensitivity cleaner.

Remove the soils using a spot cleaner.

Check the dispenser and add the rinse aid. Use a liquid type rinse aid.

Connect the water supply line to a hot water supply.

Use rinse aid with the Sanitize option. Proper loading of items can affect drying.

Load your dishes as recommended. (See page 16.)

After finishing the cycle, empty the lower rack first and then the upper rack. This will

_revent water dripping from the upper rack

onto the dishes in the lower rack. Insert detergent without loading dishes,

and run the Normal cycle to clean the dishwasher.

Contact a qualified service technician to remove any obstruction from the drain

hose. With the dishwasher empty and no

detergent, place a glass with 8 ounces of vinegar upright into the lower

rack, and then run a Normal cycle.

This is normal operation.

Ensure the dishwasher is level. Contact a qualified service technician to

remove foreign material from the pump chamber.

Rearrange the dishes.

24 troubleshooting

DW80F600 DDS1-01555A-01 EN.indd Sec7:24 2013-06-04 ZC 11:27:01 I

The nozzle hole is clogged with

Does not have a smoothly rotating

nozzle;

Water won!t

food particles. The nozzle is blocked by a dish or

pot and cannot rotate.

The drain is clogged.

pump ou t of the dishwasher.

Has a bent upper The dishes are not loaded rack after loading properly.

dishes;

Clean the nozzle hole. See page 20.

After placing the dishes into the racks, rotate the nozzles by hand to check whether any of the dishes interfere with

them. Contact a qualified service technician to

remove any obstruction from the drain hose and check the drain pump operation.

Load your dishes as recommended. (See page 16.)

DW80F600 DDS1-01555A-01 EN.indd Sec7:25

troubleshooting 25

2013-06-04 _C 11:27:01 I

iNFORMATiON CODES

The Control Panel displays information codes to help you understand what is occurring with your dishwasher. If you see any of the codes listed below, you should select the Cancel and Drain option, and

then follow the instructions in the Solution column.

If your dishwasher have any problem, below CODE SYMBOL light(s) is(are) blinked.

÷ ;,-

SmartAuto Nom_a I Neavy _ D_lcate

5madAuto Norma _ Heaw Delcate

SmartAuto Norma I Heavy Delcate

Stoat[Auto ..... I .... I .......

SmamAuto Norma Neavy I De]care

SmartAuto Norma I Heavy I Delcate

9 @ @

Sma_Auto Norma _ lleaw Delcate

°.

SmartAuto Norma I ffeaw Delcate

@ @

SmartAuto Norma] Heavy Deicate

Temperature Sensor error

Heater error

Functional error. With the dishwasher empty, add

detergent, and then run a cycle.

Ifthe problem continues, go to your house circuit breaker

High temperature heating

erFor

panel, set the dishwasher's circuit breaker switch to off,

and then contact anauthorized Samsung service center.

Lowqevel water error

Oheck whether the water supply valve is closed, the water supply is suspended or the water inlet valve or line is

Water supply error

frozen or clogged by foreign particles.

Ifthe problem continues, dose the water supply valve, and

then contact an authorized Samsung service center.

High temperature water Oheck the temperature of the supplied water. If it is higher supply error dishwasher.

than 176 °F(80 °0), a functional error may occur with the

Oheck whether the drain hose is dogged or folded. If the

Drain error problem continues, dose the water supply valve, and then

contact an authorized Samsung service center.

Over-level water error

Functional error. Close the water supply valve and go to

/our house circuit breaker panel, set the dishwasher's

circuit breaker switch to off, and then contact an

Leakage error

authorized Samsung service center.

SmartAuto Norma [ heavy De,care

Button error

Oommunication Error

SmartAuto I Norma I Heavy ! DeJca_

Functional error. Turn off the dishwasher and try to start it

again.

Ifthe problem continues, contact an authorized Samsung

service center.

For any codes not listed above, call 1-800-SAMSUNG (726-7864)

26 troub@shooting

DW80F600 DDSl-01555A-01 EN.indd Sec7:2d 2013-06-04 EC 11:27:01 I

appendix

HELPING THE ENVIRONMENT

Your dishwasher is manufactured from recyclable materials. If you decide to dispose of it, please observe local waste disposal regulations. Cut off the power cable so that the appliance cannot be

connected to a power source. Remove the door so that animals and small children cannot get trapped inside the appliance. Do not exceed the detergent quantities recommended in the detergent manufacturers' instructions.

SPECI FICATIONS

Type Built-in Dishwasher Wash capacity 15 place setting

Power 15 A circuit breaker used Water 20 - 120 psi

Bated power uasge

Dimensions 237/s x 24% x 337/sin. (605 x 627 x 860 mm) (WlidthxDepthxHeight)

Weight Unpacked 98.31b (44.6Kg)

................120v/60HzAconly, preSSUre1/140- 8S0kPa/

Wash Motor : 150 _ 190 W

Heater : 1100 W

DW80F600 DDS1-01555A-01 EN.indd Sec8:27

appendix 27

2013-06-04 CC 11:27:04 I

SAMSUNG DISHWASHER

LiMiTED WARRANTY TO ORiGiNAL PURCHASER

This SAMSUNG brand product, as supplied and distributed by USA: SAMSUNG ELECTRONICS AMERICA,

INC./CANADA: SAMSUNG ELECTRONICS CANADA, INC. (SAMSUNG) and delivered new, inthe original

carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of:

One (1) Year All Parts and Labor, Five (5) Years Printed Circuit Board, Racking (Labor Charges for in-home service starting from the 2nd year is customer's responsibility), and Lifetime Stainless Door Liner & Tub for leakage. Samsung will replace your unit with same or current model (that is better or equivalent in functionality) (Labor related to replacement is customer's responsibility).

This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States/Canada. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. SAMSUNG will provide in-home service during the warranty period at no charge, subject to availability within the contiguous United States/Canada.

In home service is not available in all areas.

To receive in-home service, product must be unobstructed and accessible to the service agent. If service is not available, SAMSUNG may elect to provide transportation of the product to and from an authorized

service center.

SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period

specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90)

days, whichever is longer.

This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use of this product and shall not apply to the following: damage that occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning, or other acts of nature or God; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied or authorized by SAMSUNG that damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal and reinstallation; problems caused by pest infestations. This limited warranty does not cover problems resulting from

incorrect electric current, voltage or supply, light bulbs, house fuses, house wiring, cost of a service call for instructions, or fixing installation errors. SAMSUNG does not warrant uninterrupted or error-free operation of the product.

28 warranty

DW80F600 DDS1-01555A-01 EN.indd Sec10:28 2013-06-04 q7 11:27:04 I

EXCEPT AS SET FORTH HEREIN, THERE ARE NO WARRANTIES ON THIS PRODUCT EITHER EXPRESS

OR IMPLIED, AND SAMSUNG DISCLAIMS ALL WARRANTIES iNCLUDiNG, BUT NOT LiMiTED TO, ANY

iMPLIED WARRANTIES OF MERCHANTABILITY, INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE. NO WARRANTY OR GUARANTEE GIVEN BY ANY PERSON, FIRM, OR CORPORATION WiTH

RESPECT TO THiS PRODUCT SHALL BE BiNDiNG QN SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY

OTHER SPECIAL, INCIDENTAL QR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE, QR

iNABILiTY TO USE THiS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IFSAMSUNG HAS BEEN ADVISED OF THE POSSIBiLiTY OF SUCH DAMAGES.

NORSHALL RECOVERY OF ANY KINDAGAINST SAMSUNG BE GREATERIN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE.

WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS,

DAMAGE, OR INJURY TO PURCHASER AND PURCHASER'S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT. THIS LIMITED

WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS

PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific rights, and you may also have other rights, which vary from state to state.

1"o obtain warranty service, please contact SAMSUNG at:

in USA

Samsung Electronics America, Inc. 85 Challenger Road Ridgefield Park, NJ 07660

1-800-SAMSUNG (726-7864)

www.samsung.com

In CANADA Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada

1-800-SAMSUNG (726-7864) www.samsung.com/ca (English) www.samsung.com/cafr (French)

DW80F600 DDS1-01555A-01 EN.indd Sec10:29

warranty 29

2013-06-04 _7 11:27:04 I

+ 67 hidden pages