Samsung DW60M5040BB Operating Instructions

Download

Page 1

Dishwasher

user manual

DW60M5060BB

DW60M5060FS DW60M5060FW

DW60M5040BB

DW60M5040FS

DW60M5040FW

DW60M5030FS

DW60M5030FW

DW60M5010FS

DW60M5010FW

imagine the possibilities

Thank you for purchasing this Samsung product.

DW4000KM-00000A-00_EN (Basic)_160323.indd 1

Page 2

Contents

SAFETY INFORMATION

OPERATION INSTRUCTION

PRIOR USING FOR THE FIRST TIME

LOADING THE DISHWASHER RACKS

STARTING A WASHING PROGRAMME

MAINTENANCE AND CLEANING

5 Hydrogen gas is explosive 5 Proper use 6 Disposal 6 Instruction about the WEEE mark

7 Control panel 13 Displays 18 Dishwasher features

20 Set the water softener 21 Loading the salt into the softener 22 Fill the rinse aid dispenser 22 Rinse aid dispenser 23 Function of detergent

26 Loading the upper basket 27 Loading the lower basket 29 Cutlery basket and fork shelf 30 For washing in the dishwasher the following

cutlery/dishes

32 Wash cycle table 36 Turning on the appliance 37 Change the programme 37 Forget to add dish 37 Unloading the dishwasher

38 Filtering system 38 Filter assembly 39 Cleaning the spray arms 39 Caring for the dishwasher 39 Protect against freezing 39 Cleaning the door 40 How to keep your dishwasher in shape

INSTALLATION INSTRUCTION

TROUBLESHOOTING TIPS

2_ Contents

DW4000KM-00000A-00_EN (Basic)_160323.indd 2

APPENDIX

41 Positioning and leveling 42 Connecting the water and electricity supplies 44 Built-in dishwasher 49 Start of dishwasher

50 Information codes 51 Before calling for service

53 Speciﬁcations 53 Product dimension

Page 3

Safety information

Please read this User Information carefully and keep it to refer to at a later date. Pass it on to any subsequent owner of the appliance.

This manual contains sections of Safety Instructions, Part and Features, Installation your dishwasher and Troubleshooting etc.

Carefully reading it before using the dishwasher will help you to use and maintain the dishwasher properly.

The manufacturer, following a policy of constant development and up-dating of the product, may make modiﬁcations without giving prior notice.

WARNING: When using your dishwasher, follow the below basic precautions including the following:

1. This appliance is not to be used by persons (including

children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

2. For use in Europe: This appliance can be used by

children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

01 SAFETY INFORMATION

3. Children should be supervised to ensure that they do not

play with the appliance.

4. If the supply cord is damaged, it must be replaced by

the manufacturer, its service agent or similarly qualiﬁ ed persons in order to avoid a hazard.

READ AND FOLLOW THIS SAFETY INFORMATION

CAREFULLY SAVE THESE INSTRUCTIONS

DW4000KM-00000A-00_EN (Basic)_160323.indd 3

Safety information _3

Page 4

Safety information

5. The new hose-sets supplied with the appliance are to be

used and that old hose-sets should not be reused.

6. For appliances with ventilation openings in the base, that

a carpet must not obstruct the openings.

7. For use in Europe: Children of less than 3 years should

be kept away unless continuously supervised.

8. CAUTION: In order to avoid a hazard due to inadvertent

resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly

by the utility.

9. This appliance is intended to be used in household and

similar applications such as:

ces and other working

environments;

– farm houses; – by clients in hotels, motels and other residential type

environments;

– bed and breakfast type environments.

10. The door should not be left in the open position since

this could present a tripping hazard.

11. WARNING: Knives and other utensils with sharp points

must be loaded in the basket with their points down or placed in a horizontal position.

12. Please do not overload your dishwasher. There is only

space for 13／14 standard dishes. Do not use dish that is not suitable for dishwashers. This is important for good results and for reasonable energy consumption.

READ AND FOLLOW THIS SAFETY INFORMATION

CAREFULLY SAVE THESE INSTRUCTIONS

4_ Safety information

DW4000KM-00000A-00_EN (Basic)_160323.indd 4

Page 5

Hydrogen gas is explosive

Under certain conditions, Hydrogen gas may be produced in a hot-water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot-water system has not been used for such a period, before using the dishwasher turn on all hot-water faucets and let the water ﬂow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is ﬂammable, do not smoke or use an open ﬂame during this time.

Proper use

• Do not abuse, sit on, or stand on the door or dish rack of the dishwasher.

• Do not operate your dishwasher unless all enclosure panels are properly in place. Open the door very

carefully if the dishwasher is operating. There is a risk of water squirting out.

• Do not place any heavy objects of stand on the door when it is open. The appliance could tip forward.

• When loading items to be washed:

- Locate sharp items so that they are not likely to damage the door seal;

- Load sharp knives with the handles up to reduce the risk of cut-type injuries;

• Warning : knives and other utensils with sharp points must be loaded in the basket with their points down or placed in a horizontal position.

• Check that the detergent receptacle is empty after completion of the wash cycle.

• Do not wash plastic items unless they are marked dishwasher safe or the equivalent. For plastic items

not so marked, check the manufacturer’s recommendations.

• Use only detergent and rinse additives designed for an automatic dishwasher. Never use soap, laundry detergent, or hand washing detergent in your dishwasher.

• Other means for disconnection from the supply must be incorporated in the ﬁxed wiring with at least 3 mm contact separation in all poles.

• Keep children away from detergent and rinse aid, keep children away from the open door of the dishwasher, there could still be some detergent left inside.

• Young children should be supervised to ensure that they do not play with the appliance.

• The appliance is not intended for use by young children or inﬁrm persons without supervision.

• Dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid

contact with skin and eyes and keep children away from the dishwasher when the door is open.

• The door should not be left in the open position since this could present a tripping hazard.

• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly

qualiﬁed person in order to avoid a hazard.

• Please dispose of packing materials properly.

• Use the dishwasher only for its intended function.

• During installation, the power supply must not be excessively or dangerously bent or ﬂattened.

• Do not tamper with controls.

• The appliance is to be connected to the water mains using new hose sets and the old hose-sets should

not be reused.

01 SAFETY INFORMATION

READ AND FOLLOW THIS SAFETY INFORMATION

CAREFULLY SAVE THESE INSTRUCTIONS

DW4000KM-00000A-00_EN (Basic)_160323.indd 5

Safety information _5

Page 6

Safety information

Disposal

Dispose of the dishwasher packaging material correctly. All packaging materials can be recycled. Plastic parts are marked with the standard international abbreviations:

PE for polyethylene, e.g. sheet wrapping material PS for polystyrene, e.g. padding material POM polyoxymethylene, e.g. plastic clips PP polypropylene, e.g. Salt ﬁller ABS Acrylonitrile Butadiene Styrene, e.g. Control Panel.

WARNING: Packaging material could be dangerous for children!

power supply cable and make the door closing device unusable. Cardboard packaging is manufactured from recycled paper and should be disposed in the waste paper collection for recycling. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.

your household waste disposal service.

Instruction about the WEEE mark

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or

environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

For information on Samsung’s environmental commitments and product speciﬁc regulatory obligations e.g. REACH visit: samsung.com/uk/aboutsamsung/samsungelectronics/corporatecitizenship/data_corner.html

READ AND FOLLOW THIS SAFETY INFORMATION

CAREFULLY SAVE THESE INSTRUCTIONS

6_ Safety information

DW4000KM-00000A-00_EN (Basic)_160323.indd 6

Page 7

Operation instruction

Control panel

DW60M5060FS/DW60M5060FW

02 OPERATION INSTRUCTION

1 Press this button to turn on your dishwasher : the screen lights up.

2 Program To select washing program press this button.

To select Half load function. With this Half load function you can only use it

3 Half load

4 Delay start

5 Display Running indicator, delay time, information codes and etc.

6 Rinse Add

7 Hygiene

Multi tab

(Control lock)

• When the door is open only the

• You can select options (Multi in 1, Delay start, Half load, Hygiene and Rinse Add) before

starting a cycle.

to wash either basket, and you will see less water and energy consumption. It can only be used with all program expect Pre Wash．

Press this button to set the delayed hours for washing. You can delay the start of washing up to 24 hours. One press on this button delays the start of washing by one hours.

To select Rinse Add function, you can use it when you want to add once rinse after the program. It can be used with all program expect Pre Wash.

Push the Hygiene button for the best possible hygiene in your dishwasher. At the ﬁnal rinse it heat up to 70 °C and hold this temperature for a several minutes. This function is available with all program except Pre Wash.

To select Multi in 1 option which needs salt and rinse aid but a Multi in 1 tablet. This option can be used with other programme ( Intensive、Eco ） Another option allows you to lock the buttons on the control panel so children cannot accidentally start the dishwasher by pressing the buttons on the panel. To lock and unlock the buttons on the control panel, hold down the button for 3 seconds.

Multi in 1

In power on condition, close the dishwasher door and select the cycle and desired options. Press the button to begin the cycle.

When you want to pause the dishwasher while running, press the button and make sure to open the door slowly and carefully.

You can reset the machine by pressing the button for 3 seconds during washing. After reset, the dishwasher goes to the initial state except salt consumption setting of water softener.

5 94 8

button will operate.

DW4000KM-00000A-00_EN (Basic)_160323.indd 7

Operation Instruction _7

Page 8

Operation instruction

Control panel

DW60M5040FS／DW60M5040FW

1 Press this button to turn on your dishwasher : the screen lights up.

2 Program To select washing program press this button.

To select Half load function. With this Half load function you can only use it

3 Half load

4 Delay start

5 Display Running indicator, delay time, information codes and etc.

6 Hygiene

7 Multi tab

Control lock

• When the door is open only the

• You can select options (Multi in 1, Delay start, Half load, Hygiene and Rinse Add) before

starting a cycle.

to wash either basket, and you will see less water and energy consumption. It can only be used with all program except Pre Wash．

Press this button to set the delayed hours for washing. You can delay the start of washing up to 24 hours. One press on this button delays the start of washing by one hours.

To select Multi in 1 option which needs salt and rinse aid but a Multi in 1 tablet. This option can be used with other programme ( Intensive, Eco and normal).

Control lock option allows you to lock the buttons on the control panel so children cannot accidentally start the dishwasher by pressing the buttons on the panel.

Control lock

In power on condition, close the dishwasher door and select the cycle and desired options. Press the button to begin the cycle.

When you want to pause the dishwasher while running, press the button and make sure to open the door slowly and carefully.

You can reset the machine by pressing the button for 3 seconds during washing. After reset, the dishwasher goes to the initial state except salt consumption setting of water softener.

To lock and unlock the buttons on the control panel, hold down the

button for 3 seconds.

8_ Operation Instruction

5 94 8

button will operate.

DW4000KM-00000A-00_EN (Basic)_160323.indd 8

Page 9

Operation instruction

Control panel

DW60M5030FS/DW60M5030FW

1 6

2 3 4 5

1 Press this button to turn on your dishwasher : the screen lights up.

2 Program To select washing program press this button.

To select Half load function. With this Half load function you can only use it

3 Half load

to wash either basket, and you will see less water and energy consumption. It can only be used with all program except Pre Wash．

02 OPERATION INSTRUCTION

4 Hygiene

Multi tab

(Control lock)

• When the door is open only the

• You can select options (Multi in 1, Delay start, Half load, Hygiene and Rinse Add) before

starting a cycle.

DW4000KM-00000A-00_EN (Basic)_160323.indd 7

To select Multi in 1 option which needs salt and rinse aid but a Multi in 1 tablet. This option can be used with other programme ( Intensive, Eco and normal ). Another option allows you to lock the buttons on the control panel so children cannot accidentally start the dishwasher by pressing the buttons on the panel. To lock and unlock the buttons on the control panel, hold down the button for (3) seconds.

In power on condition, close the dishwasher door and select the cycle and desired options. Press the button to begin the cycle.

When you want to pause the dishwasher while running, press the button and make sure to open the door slowly and carefully.

You can reset the machine by pressing the button for 3 seconds during washing. After reset, the dishwasher goes to the initial state except salt consumption setting of water softener.

Multi in 1

button will operate.

Operation Instruction _9

Page 10

Operation instruction

Control panel

DW60M5010FS/DW60M5010FW

1 6

2 3 4 5

1 Press this button to turn on your dishwasher : the screen lights up.

2 Program To select washing program press this button.

3 Half load

4 Hygiene

Multi tab

(Control lock)

• When the door is open only the

• You can select options (Multi in 1, Delay start, Half load, Hygiene and Rinse Add) before

starting a cycle.

To select Half load function. With this Half load function you can only use it to wash either basket, and you will see less water and energy consumption. It can only be used with all program except Pre Wash.

Multi in 1

In power on condition, close the dishwasher door and select the cycle and desired options. Press the button to begin the cycle.

When you want to pause the dishwasher while running, press the button and make sure to open the door slowly and carefully.

You can reset the machine by pressing the button for 3 seconds during washing. After reset, the dishwasher goes to the initial state except salt consumption setting of water softener.

button will operate.

10_ Operation Instruction

DW4000KM-00000A-00_EN (Basic)_160323.indd 7

Page 11

Operation instruction

Control panel

DW60M5060BB

3 4 5 10 116 8 971 2

DW60M5040BB

1 Press this button to turn on your dishwasher : the screen lights up.

2 Cycle To select washing program press this button.

When you select Upper, only the upper rack nozzle is activated. The lower nozzle will not operate.

Use this feature to wash a small load of dishes or glasses placed in the upper

3 Upper

4 Lower

5 Hygiene

6 Rinse Add

7 Multi tab

8 Control lock

rack.

When you select Upper, place dishes, glasses, etc. in the upper rack only. The dishwasher will not wash items placed in the lower rack.

Selecting Upper reduces both the cycle time and the amount of electricity consumed.

When you select Lower, only the lower rack nozzle is activated. The upper nozzle will not operate.

Use this feature to wash a small load of dishes or glasses placed in the lower rack.

When you select Lower, place items, glasses, etc. in the lower rack only. The dishwasher will not wash items placed in the upper rack.

Selecting Lower reduces both the cycle time and the amount of electricity consumed.

To select Rinse Add function, you can use it when you want to add once rinse after the program. It can be used with all program expect Pre Wash.

To select Multi in 1 option which needs salt and rinse aid but a Multi in 1 tablet. This option can be used with other programme ( Intensive, Eco and normal ).

Control lock option allows you to lock the buttons on the control panel so children cannot accidentally start the dishwasher by pressing the buttons on the panel.

02 OPERATION INSTRUCTION

DW4000KM-00000A-00_EN (Basic)_160323.indd 11

Operation Instruction _11

Page 12

If Rinse Reﬁll or Salt Reﬁll indicator is lit, it means rinse or salt is needed to reﬁll.

Salt Reﬁll Indicator

• If the “Salt Reﬁll” indicator is lit, it means the dishwasher is low on

dishwasher salt and needs to be reﬁlled.

9 Indicator

Rinse Reﬁll Indicator

• If the “Rinse Reﬁll” indicator is lit, it means the dishwasher is low on

dishwasher rinse aid and requires a reﬁll.

Control lock Indicator

• If the “Control lock” indicator id ﬁt, it means the dishwasher is

locked, you cannot do any operate.

Press this button to set the delayed hours for washing. You can delay the

10 Delay start

start of washing up to 24 hours. One press on this button delays the start of washing by one hours.

In power on condition, close the dishwasher door and select the cycle and desired options. Press the button to begin the cycle.

When you want to pause the dishwasher while running, press the

button and make sure to open the door slowly and carefully. You can reset the machine by pressing the button for 3 seconds

during washing. After reset, the dishwasher goes to the initial state except salt consumption setting of water softener.

• You can select options (Multi tab, Half load, Delay, Hygiene and Rinse Add) before starting a

cycle.

12_ Operation Instruction

DW4000KM-00000A-00_EN (Basic)_160323.indd 12

Page 13

Operation instruction

Displays

DW60M5060FS/DW60M5060FW/DW60M5040FS/DW60M5040FW

In below market, the Eco program is the one which is tested when getting the certification, same as Eco program:

02 OPERATION INSTRUCTION

1 PROGRAM ICONS When press the

（DW60M5060FS）（DW60M5060FW）

（DW60M5040FS）

Normal

（DW60M5040FW）

Eco

Intensive Heavily soiled items include pots and pans.

Quick Wash

（DW60M5060FS）（DW60M5060FW）

Delicate

Express Normally soiled daily using items, with short cycle time.

Pre Wash

（DW60M5060FS）（DW60M5060FW）

2 3*8 SEGMENT Display the remaining time, information code, or delay time.

Program button, each program is selected.

Is optimiz according to the soiled loads, such as pots, pans, utensils and cutlery, with the aid of sensors.

For normally soiled loads, such as pots, plates, glasses, and lightly soiled pans. Standard daily cycle.

Normally soiled daily using items, with reduced energy and water consumptions.

Lightly soiled with very short cycle time.

Lightly soiled delicate items.

Cold rinse for remove only dirt on dishes stored for a long time or soaking dishes which are dried up before other programme running.

DW4000KM-00000A-00_EN (Basic)_160323.indd 13

Operation Instruction _13

Page 14

3 OPTION ICONS

Rinse Add

（DW60M5060FS）（DW60M5060FW）

Hygiene

Multi tab (Control lock)

4 INDICATORS

SALT REFILL INDICATOR

RINSE REFILL INDICATOR

CONTROL LOCK INDICATOR

DELAY START INDICATOR

When pressing the option icons, the corresponding option function is selected.

To select Rinse Add function, you can use it when you want to add once rinse after the program. It can be used with all program expect Pre Wash.

When the indicator is on, it reminds of that client has chosen delay function, client need to add salt and etc.

If the “Salt Reﬁll” indicator is lit, it means the dishwasher is low on dishwasher salt and needs to be reﬁlled.

If the “Rinse Reﬁll” indicator is lit, it means the dishwasher is low on dishwasher rinse aid and requires a reﬁll.

If the “Control lock” indicator id ﬁt, it means the dishwasher is locked, you cannot do any operate.

If the “Delay Start” indicator is ﬁt, it means the dishwasher start will delay several hours which you setup.

14_ Operation Instruction

DW4000KM-00000A-00_EN (Basic)_160323.indd 12

Page 15

DW60M5030FS/DW60M5030FW/DW60M5010FS/DW60M5010FW

1 2 3

1 PROGRAM ICONS When press the Program button, each program is selected.

02 OPERATION INSTRUCTION

Normal

Eco

（DW60M5030FS）（DW60M5030FW）

For normally soiled loads, such as pots, plates, glasses, and lightly soiled pans. Standard daily cycle.

Normally soiled daily using items, with reduced energy and water consumptions.

Intensive Heavily soiled items include pots and pans.

Express Normally soiled daily using items, with short cycle time.

2 OPTION ICONS

When pressing the option icons, the corresponding option function is selected.

Push the Hygiene button for the best possible hygiene in your

Hygiene

dishwasher. At the ﬁnal rinse it heat up to 70 °C and hold this temperature for a several minutes. This function is available with all program except Pre Wash.

To select Multi in 1 option which needs salt and rinse aid but a Multi in 1 tablet. This option can be used with other programme ( Intensive, Eco

Multi tab (Control lock)

and normal ). Another option allows you to lock the buttons on the control panel so children cannot accidentally start the dishwasher by pressing the buttons on the panel. To lock and unlock the buttons on the control panel, hold down both the Multi in 1 button for (3) seconds.

3 INDICATORS

SALT REFILL INDICATOR

RINSE REFILL INDICATOR

CONTROL LOCK INDICATOR

When the indicator is on, it reminds of that client has chosen delay function, client need to add salt and etc.

If the “Salt Reﬁll” indicator is lit, it means the dishwasher is low on dishwasher salt and needs to be reﬁlled.

If the “Rinse Reﬁll” indicator is lit, it means the dishwasher is low on dishwasher rinse aid and requires a reﬁll.

If the “Control lock” indicator id ﬁt, it means the dishwasher is locked, you cannot do any operate.

DW4000KM-00000A-00_EN (Basic)_160323.indd 14

Operation Instruction _15

Page 16

DW60M5060BB

DW60M5040BB

1 PROGRAM ICONS When press the Program button, each program is selected.

（DW60M5060BB）

（DW60M5040BB）

Normal

Eco

Is optimiz according to the soiled loads, such as pots, pans, utensils and cutlery, with the aid of sensors.

For normally soiled loads, such as pots, plates, glasses, and lightly soiled pans. Standard daily cycle.

Normally soiled daily using items, with reduced energy and water consumptions.

Intensive Heavily soiled items include pots and pans.

Quick Wash

（DW60M5060BB）

Delicate

Lightly soiled with very short cycle time.

Lightly soiled delicate items.

43 2

Express Normally soiled daily using items, with short cycle time.

Pre Wash

（DW60M5060BB）

2 3*8 SEGMENT Display the remaining time, information code, or delay time.

16_ Operation Instruction

DW4000KM-00000A-00_EN (Basic)_160323.indd 15

Cold rinse for remove only dirt on dishes stored for a long time or soaking dishes which are dried up before other programme running.

Page 17

3 OPTION ICONS

Rinse Add

（DW60M5060BB）

Hygiene

Multi tab (Control lock)

4 INDICATORS

SALT REFILL INDICATOR

RINSE REFILL INDICATOR

CONTROL LOCK INDICATOR

DELAY START INDICATOR

When pressing the option icons, the corresponding option function is selected.

To select Rinse Add function, you can use it when you want to add once rinse after the program. It can be used with all program expect Pre Wash.

When the indicator is on, it reminds of that client has chosen delay function, client need to add salt and etc.

If the “Salt Reﬁll” indicator is lit, it means the dishwasher is low on dishwasher salt and needs to be reﬁlled.

If the “Rinse Reﬁll” indicator is lit, it means the dishwasher is low on dishwasher rinse aid and requires a reﬁll.

If the “Control lock” indicator id ﬁt, it means the dishwasher is locked, you cannot do any operate.

If the “Delay Start” indicator is ﬁt, it means the dishwasher start will delay several hours which you setup.

02 OPERATION INSTRUCTION

DW4000KM-00000A-00_EN (Basic)_160323.indd 12

Operation Instruction _17

Page 18

Operation instruction

Dishwasher features

Front & Rear View

1 Upper Basket

2 Spray Arms

3 Lower Basket

4 Water Softener

5 Filters

6 Detergent Dispenser

7 Rinse Aid Dispenser

Cutlery basket

Fork shelf

Free standing Dishwasher ( 13 place setting )

DW60M5040FS/DW60M5040FW/DW60M5030FS/DW60M5030FW DW60M5010FS/DW60M5010FW

1 Upper Basket

2 Spray Arms

3 Lower Basket

4 Water Softener

5 Filters

6 Detergent Dispenser

7 Rinse Aid Dispenser

Full built in Dishwasher ( 13 place setting )

DW60M5040BB

18_ Operation Instruction

DW4000KM-00000A-00_EN (Basic)_160323.indd 16

Cutlery basket

Fork shelf

Page 19

Operation instruction

Dishwasher features

Front & Rear View

Free standing Dishwasher ( 14 place setting )

DW60M5060FS/DW60M5060FW

1 Upper Basket

2 Spray Arms

3 Lower Basket

4 Water Softener

5 Filters

6 Detergent Dispenser

7 Rinse Aid Dispenser

Cup Holder

Cutlery Tray

Full built in Dishwasher ( 14 place setting )

DW60M5060BB

DW4000KM-00000A-00_EN (Basic)_160323.indd 16

1 Upper Basket

2 Spray Arms

3 Lower Basket

4 Water Softener

5 Filters

6 Detergent Dispenser

7 Rinse Aid Dispenser

Cup Holder

Cutlery Tray

Operation Instruction _19

Page 20

Prior using for the ﬁrst time

Before using your dishwasher for the ﬁrst time:

A. Set the water softener B. Loading the salt into the softener C. Fill the rinse aid dispenser

D. Fill in detergent

Set the water softener

The water softener is designed to remove minerals and salts from the water, which would have a detrimental

harder the water is. The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.

Setting

The amount of salt dispensed can be set from H0 to H7. Salt is not required at the set value H0.

1. Find out about the hardness value of your tap water. Your water utility company will help you

with this.

2. Set value can be found in the water hardness table.

3. Close the door.

4. Switch on "Power" switch.

5. Hold down "Delay" button and then press "Program" button (for freestanding dishwasher) or

"Start" button (for full built-in dishwasher) for 5 seconds. The buzzer rings one time and H. ﬂ ashes on the digital display. (factory setting is H4)

Water hardness adjusting scheme ( DW60M5060FS/DW60M5060FW/DW60M5060BB/

DW60M5040FS/DW60M5040FW/DW60M5040BB )

To change the setting:

1. Press "Delay" button.

Each time the button is pressed, the set value increases by one level; when the value of H7

2. Press "Program" or "Start" button. The chosen setting has now been stored.

Contact your local water board for information on the hardness of your water supply.

Water hardness table

WATER HARDNESS

°Clark Range

27~38 hard 3.8~5.4 H6

20_ Prior Using for the First Time

DW4000KM-00000A-00_EN (Basic)_160323.indd 17

mmol/l Value setting

0H1.1~0 tfos8~0

1H 4.1~2.1 tfos01~9

2H 8.1~5.1 muidem21~11

3H 1.2~9.1 muidem51~31

4H 9.2~2.2 muidem02~61

5H 7.3~0.3drah62~12

7H 9.8~5.5drah26~93

Page 21

Prior using for the ﬁrst time

Water hardness adjusting scheme ( DW60M5030FS/DW60M5030FW/

DW60M5010FS/DW60M5010FW )

water hardness adjusting scheme

When dishwasher is in standby mode, press the program button and the start button for 5s

(at the same time), then with a buzzle sound, the LED will show the water hardness spec setting, release the button.

Each time pressing the Delay button, the setting value will add "1" with a buzzle sound.

The value can be set from H0 to H7 repeatedly.

For the indicator of the water hardness value setting, please refer to below table:

WATER HARDNESS

°Clark Range

mmol/l Value setting

1.1~0 tfos8~0

4.1~2.1 tfos01~9

2H 8.1~5.1 muidem21~11

3H 1.2~9.1 muidem51~31

4H 9.2~2.2 muidem02~61

5H 7.3~0.3drah62~12

7H 9.8~5.5drah26~93

After setting, press the start button, the chosen value will be saved and the dishwasher will operate according to the setting.

Loading the salt into the softener

Always use salt intended for use with dishwasher.

If your model has no water softener, you may skip this section

WATER SOFTENER

The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits will form on the dishes and utensils. The appliance is equipped with a special softener that uses salts speciﬁcally designed to eliminate lime and minerals from the water.

The salt container is located beneath the lower basket and should be ﬁlled as follows:

Indicator

on on on

on on Flash

on Flash on

on Flash Flash

Flash on on

Flash on Flash

Flash Flash on

Flash Flash Flash

03 PRIOR USING FOR THE FIRST TIME

CAUTION: Only use salt speciﬁcally designed for use in dishwashers! All other types of salt not speciﬁcally designed for use in a dishwasher, especially table salt, will damage the water softener. In case of damages caused by the use of unsuitable salt the manufacturer does not give any warranty nor is liable for any caused damages. Only ﬁll with salt just before starting one of the complete washing programmes. This will prevent any grains of salt or salty water, which may have been split, remaining on the bottom of the machine for any period of time, which may cause corrosion. After the ﬁrst wash cycle the control panel light expires.

1. Remove the lower basket and then

unscrew and remove the cap from the salt container.

DW4000KM-00000A-00_EN (Basic)_160323.indd 18

Prior Using for the First Time _21

Page 22

2. If you are ﬁ lling the container for the ﬁ rst time, ﬁ ll 2/3 of its volume with water (around 500ml).

3. Place the end of the funnel (supplied) into the hole and introduce about 2kg of salt. It is normal for a

small amount of water to come out of the salt container.

4. Carefully screw the cap back on.

• The salt container must be reﬁlled when the salt warning light in the control panel comes on. Though the salt container is ﬁlled enough, the indicator light may not black out before the salt fully dissolve. If there is no salt warning light in the control panel (for some models), you can judge when to load the salt into the softener by the cycles that the dishwasher had run (see the following schema).

• If there are spills of the salt, a soak program could be run to wipe them out.

in 2-6 days after the salt container is ﬁ lled with salt.

Fill the rinse aid dispenser

Function of rinse aid

Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, spot and streak free drying.

CAUTION: Only use branded rinse aid for dishwasher. Never ﬁll the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.

When to Reﬁll the Rinse Aid Dispenser

If there is no rinse-aid warning light on the control panel, you can judge the amount of rinseaid by the color of the optical level indicator "D" located next to the cap. When the rinse-aid container is full, the whole indicator will be dark. As the rinse aid diminishes, the size of the dark dot decreases. You should never let the rinse aid get below 1/4 full.

As the rinse aid diminishes, the size of the black dot on the rinse aid level indicator changes, as illustrated below.

Full 3/4 full 1/2 full 1/4 full : Should reﬁll to eliminate spotting Empty

D (Rinse-Aid indicator)

Rinse aid dispenser

1. To open the dispenser, turn the cap to the "open" (left) arrow

and lift it out.

2. Pour the rinse aid into the dispenser, be careful not to overﬁ ll.

3. Replace the cap by inserting it aligned with "open" arrow

and turning it to the "closed" (right) arrow.

22_ Prior Using for the First Time

DW4000KM-00000A-00_EN (Basic)_160323.indd 19

Page 23

Prior using for the ﬁrst time

The rinse aid is released during the ﬁnal rinse to prevent water from forming droplets on your

the dishes. Your dishwashers are designed to use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser.

To ﬁll the dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely black. The volume of the rinse aid container is about 130ml.

Be careful not to overﬁll the dispenser, because this could cause over sudsing. Wipe away any spills with a damp cloth. Don't forget to replace the cap before you close dishwasher door.

CAUTION: Clean up any rinse aid split during ﬁlling with an absorbent cloth to avoid excess foaming during the next wash.

03 PRIOR USING FOR THE FIRST TIME

Adjusting Rinse Aid Dispenser

Adjust the amount of rinse aid released during the rinse operation.

You can choose one of six levels (1-6). The higher the number, the larger the amount of rinse aid released. The factory default is 5.

The use of a rinse aid greatly improves the drying performance after the ﬁnal rinse.

M AX

Adjust lever (Rinse)

Function of detergent

Detergents with its chemical ingredients are necessary to remove dirt, crush dirt and transport it out of the dishwasher. Most of commercial quality detergents are suitable for this purpose.

Concentrated detergent

Based on their chemical composition, dishwasher can be split in two basic types:

• conventional, alkaline detergents with caustic components

• low alkaline concentrated detergents with natural enzymes

The use of “normal” washing programmes in conjunction with concentrated detergents reduces pollution and is good for your dishes; these wash programmes are specially matched to the dirt-dissolving properties of the enzymes of the concentrated detergent. For this reason “normal” wash programmes in which concentrated detergents are used can achieve the same results that can otherwise only be achieved using “intensive” programmes.

Detergent tablets

cannot dissolve and develop their full cleaning power during short programmes. Therefore please use long programmes when using detergent tablets, to ensure the complete removal of detergent residuals.

Detergent dispenser

The dispenser must be reﬁlled before the start of each washing cycle following the instructions provided in the Wash Cycle Table. Your dishwashers use less detergent and rinse aid than conventional dishwashers. Generally, only one tablespoon of detergent is needed fora normal wash load. Also, more heavily soiled items need more detergent. Always add the detergent just before starting dishwasher, otherwise it could get damp and will not dissolve properly.

DW4000KM-00000A-00_EN (Basic)_160323.indd 20

Prior Using for the First Time _23

Page 24

Amount of detergent to use

1. If the lid is closed: press release

button. The lid springs open.

2. Always add the detergent just

before starting each wash cycle. Only use branded detergent aid for dishwasher.

WARNING: When using your dishwasher, follow the basic precautions including the following:

Use only detergent speciﬁcally made for use in dishwashers. Keep your detergent fresh and dry. Don't put powder detergent into the dispenser until you're ready to wash dishes.

Fill in the detergent

Fill the detergent dispenser with detergent. The marking indicates the dosing levels, as illustrated on the right:

1. The place of main wash cycle detergent placed, which

has dosing level in the interior of it.

2. For the pre-wash cycle detergent, add it into the

dishwasher directly, approximately 5g of detergent.

Please observe the manufacturer's dosing and storage recommendations as stated on the detergent packaging. Close the lid and press until it locks in place. If the dishes are heavily soiled, place an additional detergent dose in the pre-wash detergent

You ﬁnd information about the amount of detergent for the single programme on the last page. Please be aware that according to the level soiling and the speciﬁc hardness of

detergent packaging.

24_ Prior Using for the First Time

DW4000KM-00000A-00_EN (Basic)_160323.indd 21

Page 25

Prior using for the ﬁrst time

Use of Multi in 1 Detergent Tablets

General Advice

1. Before using these products you should ﬁ rst check that the water hard-ness in your supply

is compatible with the use of these products as per the detergent manufacturers instructions (on the product packaging).

2. These products should be strictly used according to the detergent manufacturers

instructions.

contact the detergent manufacturers care line (the telephone number is given on the product packaging). These products are detergents with integrated and combined detergent/rinse aid and salt functions. Before using these products you should ﬁ rst check that the water hardness in your supply is compatible with the use of these products as per the detergent manufacturers (on the product packaging).

Special Advice

When using combination products, the rinse-aid and salt lights are no longer useful. It may be helpful to select the lowest possible setting for water hardness.

To select "Multi in 1" function:

To cancel "Multi in 1" function:

To cancel "Multi in 1" function by pressing the "Multi tab" button or follow the "Cancelling a programme in progress" instruction.

If you decide to switch to the use of a standard detergent system we advise that you:

1. Reﬁ ll both the salt and rinse aid compartments.

2. Switch the water hardness setting to the highest possible position and run for three normal

cycles without load.

3. Readjust the water hardness setting again according to the conditions for your region (For

more information please refer to your instruction manual).

Multi in 1 washing cycle is additional function, they must be used with other programme (Intensive, Eco and Normal).

03 PRIOR USING FOR THE FIRST TIME

DW4000KM-00000A-00_EN (Basic)_160323.indd 22

Prior Using for the First Time _25

Page 26

Loading the dishwasher racks

For best performance of the dishwasher, follow these loading guidelines. Features and appearance of baskets and silverware baskets may vary from your model.

Attention before or after Loading the Dishwasher Baskets

water. Place objects in the dishwasher in the following way:

1. Items such as cups, glasses, pots/pans, etc. are stood upside down.

3. They are stacked securely and can not tip over.

4. They do not prevent the spray arms from rotating while washing takes place.

Very small items should not be washed in the dishwasher as they could easily fall out of the baskets.

Removing the Dishes

To prevent water dripping from the upper basket into the lower basket, we recommend that you empty the lower basket ﬁrst and then the upper basket.

Loading the upper basket

tea cup and saucers, as well as plates, small bowls and shallow pans (as long as they are not too dirty). Position the dishes and cookware so that they do not get moved by the spray of water.

Upper basket

Type Item

C Saucer

D Serving bowl

E Serving bowl

( DW60M5040BB/DW60M5040FS/ DW60M5040FW/DW60M5030FS/ DW60M5030FW/DW60M5010FS/ DW60M5010FW )

Upper basket

Type Item

C Saucer

D Serving bowl

E Serving bowl

( DW60M5060BB/DW60M5060FS/DW60M5060FW )

(13 Place setting)

puCA

ssalGB

(14 Place setting)

puCA

ssalGB

26_ Loading the dishwasher racks

DW4000KM-00000A-00_EN (Basic)_160323.indd 23

Page 27

Loading the dishwasher racks

Adjusting the upper basket

If required, the height of the upper basket can be adjusted in order to create more space for large utensils either in the upper basket or lower basket. The upper basket can be adjusted

servers or knives should be placed on the shelf so that they do not obstruct the rotation of the spray arms. The shelf can be folded back or removed when not be required for use.

( DW60M5060BB/DW60M5060FS/DW60M5060FW/DW60M5040BB/DW60M5040FS/DW60M5060FW )

( DW60M5030FS/DW60M5030FW/DW60M5010FS/DW60M5010FW )

04 LOADING THE DISHWASHER RACKS

Loading the lower basket

pans, lids, serving dishes and bowls, as shown in the ﬁgure below. It is preferable to place serving dishes and lids on the side of the baskets in order to avoid blocking the

rotation of the top spray arm. Pots, serving bowls, etc. must always be placed top down. Deep pots should be slanted to allow water to ﬂow out. The bottom basket features fold down tine rows so that larger or more pots and pans can be loaded.

Loading the dishwasher racks _27

DW4000KM-00000A-00_EN (Basic)_160323.indd 24

Page 28

Lower basket (13 Place setting)

Type Item

F Serving bowl

G Soup plate

H Dinner plate

I Dessert plate

J Oval plate

( DW60M5040BB/DW60M5040FS

DW60M5040FW/DW60M5030FS

DW60M5030FW/DW60M5010FS

DW60M5010FW )

Lower basket (14 Place setting)

Type Item

F Serving bowl

G Soup plate

H Dinner plate

I Dessert plate

J Oval plate

( DW60M5060BB/DW60M5060FS

DW60M5060FW )

Upper and lower basket folding racks

Folding racks consisting of two parts that are located on the lower basket of your machine are designed in order to let you place big items easier as pots, pans, etc. If requested, each part can be folded separately, or all of them can be folded and larger can be obtained. You can use folding racks by raising then upwards, or by folding.

28_ Loading the dishwasher racks

DW4000KM-00000A-00_EN (Basic)_160323.indd 25

Page 29

04 LOADING THE DISHWASHER RACKS

Lower basket (13 Place setting)

( DW60M5040BB/DW60M5040FS

DW60M5040FW/DW60M5030FS

DW60M5030FW/DW60M5010FS DW60M5010FW )

Lower basket (14 Place setting)

( DW60M5060BB/DW60M5060FS

DW60M5060FW )

Upper basket (13／14 Place setting)

Cutlery basket and fork shelf

Cutlery should be placed in the cutlery basket with handles at the bottom: If the basket has side baskets, the spoon should be loaded individually into the appropriate slots, especially long utensils should be placed in the horizontal position at the front of the upper basket.

Fork shelf

( DW60M5040BB/DW60M5040FS/DW60M5040FW/DW60M5030FS

DW60M5030FW/DW60M5010FS/DW60M5010FW )

DW4000KM-00000A-00_EN (Basic)_160323.indd 26

1 2

Door side

Cutlery basket

(13 Place setting)

Type Item

1 Tea spoons

2 Dessert spoons

3 Soup spoons

7 8

6 Forks

Loading the dishwasher racks _29

Page 30

Cutlery tray

Arrange the cutlery in the tray as shown. Cutlery should be placed to ensure that water runs o freely.

( DW60M5060BB/DW60M5060FS/DW60M5060FW )

Cutlery basket

(14 Place setting)

For washing in the dishwasher the following cutlery/dishes

Cutlery with wooden, horn china or mother-of-pearl handles.

Plastic items that are not heat resistant Older cutlery with glued parts that is not

temperature resistant Bonded cutlery items or dishes Pewter or cooper items Lead crystal glass Steel items subject to rusting Wooden platters Items made from synthetic ﬁbres.

WARNING: Do not let any item extend through bottom

30_ Loading the dishwasher racks

DW4000KM-00000A-00_EN (Basic)_160323.indd 27

ytilibatius detimil fo erAelbatius ton erA

Some types of glasses can become dull after a large number of washes.

Silver and aluminium parts have a tendency to discolour during washing.

Glazed patterns may fade if machine washed frequently.

Page 31

Do not put in items that are dirty of cigarette ash, candle wax, lacquer or paint. If you buy new dishes please make sure that they are suitable for dishwashers.

Please do not overload your dishwasher. There is only space for 9 standard dishes. Do not use dish that is not suitable for dishwashers. This is important for good results and for reasonable energy consumption.

Loading cutlery and dishes

Before loading the dishes, you should: Remove large left-over Soften remnants of burnt food in pans.

When loading the dishes and cutlery, please note

Dishes and cutlery must not impede the rotation of the spray arms. Load hollow items such as cups, glasses, pans etc. with the opening downwards so that water cannot collect in the container or a deep base. Dishes and items of cutlery must not lie inside one another, or cover each other

Dishes and items of cutlery must not lie inside one another, or cover each other.

• To avoid damage to glasses, they must not touch.

• The upper basket is designed to hold more delicate and lighter dishware such as

ATTENTION

Long bladed knives stored in an upright position are a potential hazard! Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket.

04 LOADING THE DISHWASHER RACKS

Damage to glassware and other dishes

• Type of glass or manufacturing process. Chemical composition of detergent.

• Water temperature and duration of dishwasher programme.

At the end of the wash

When the working cycle has ﬁnished, the buzzer of dishwasher will ring for 6 times, then stop.

of the dishwasher. Wait a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while they are still hot and more susceptible to breakage. They will also dry better.

DW4000KM-00000A-00_EN (Basic)_160323.indd 27

:ydemer detsegguS:sesuac elbissoP

• Use glassware or porcelain dishes that have been marked dishwasher-proof by the manufacturer.

• Use a mild detergent that is described as kind of dishes. If necessary, seek further information from detergent manufacturers.

• Select a programme with a low temperature.

• To prevent damage, take glass and cutlery out of the dishwasher as soon as possible after the programme has ended.

Loading the dishwasher racks _31

Page 32

Starting a washing programme

Wash cycle table（13 Place setting）

( DW60M5040BB/DW60M5040FS

Program Description of cycle

Intensive

Intensive + Hygiene

Intensive + Half load

Intensive + Rinse Add

Eco

Eco + Hygiene

Eco + Half load

Eco + Rinse Add

Normal

(DW60M5040BB/DW60M5040FS) (DW60M5040FW/DW60M5030FS) (DW60M5030FW)

/DW60M5040FW/DW60M5030FS/DW60M5030FW/DW60M5010FS/DW60M5010FW )

Pre Wash 40 °C

Main Wash 60 °C

Rinse

Hot Rinse 65 °C

Drying

Pre Wash 40 °C

Main Wash 60 °C

Rinse

Hot Rinse 70 °C

Drying

Pre Wash 40 °C

Main Wash 60 °C

Rinse

Hot Rinse 65 °C

Drying

Pre Wash 40 °C

Main Wash 60 °C

Rinse

Hot Rinse 65 °C

Drying

Pre Wash

Main Wash 45 °C

Rinse

Hot Rinse 63 °C

Drying

Pre Wash

Main Wash 45 °C

Rinse

Hot Rinse 70 °C

Drying

Pre Wash

Main Wash 45 °C

Rinse

Hot Rinse 63 °C

Drying

Pre Wash

Main Wash 45°C

Rinse

Hot Rinse 63 °C

Drying

Pre Wash

Main Wash 46 °C

Rinse

Hot Rinse 55 °C

Drying

Detergent (g)

(Pre wash / Main wash)

5/27.5 213 1.65 15.3

5/27.5 213 1.35 15.3

5/27.5 251 1.85 18.0

5/27.5 211 12

5/27.5 216 1.10

5/27.5 211 0.80

5/27.5 229 1.10 14.3

5/20 158 1.0

Running time

(min)

Energy

(KWh)

1.03

Water (L)

12.5

32_ Starting a Washing Programme

DW4000KM-00000A-00_EN (Basic)_160323.indd 24

Page 33

Program Description of cycle

Detergent (g)

(Pre wash / Main wash)

Running time

(min)

Energy

(KWh)

Pre Wash

Normal + Hygiene

(DW60M5040BB/DW60M5040FS) (DW60M5040FW/DW60M5030FS) (DW60M5030FW)

Main Wash 46 °C

Rinse

Hot Rinse 70 °C

5/20 164 1.20 12.5

Drying

Pre Wash

Normal + Half load

(DW60M5040BB/DW60M5040FS) (DW60M5040FW/DW60M5030FS) (DW60M5030FW)

Main Wash 46 °C

Rinse

Hot Rinse 55 °C

5/20 158 0.80 12.5

Drying

Pre Wash

Normal + Rinse Add

(DW60M5040BB/DW60M5040FS) (DW60M5040FW/DW60M5030FS) (DW60M5030FW)

Main Wash 46 °C

Rinse

Hot Rinse 55 °C

5/20 175 1.15 15.2

Drying

Delicate

(DW60M5040BB/DW60M5040FS) (DW60M5040FW)

Main Wash 46 °C

Rinse

Hot Rinse 55 °C

Drying

5/20 124 0.80 9.5

Main Wash 46 °C

Delicate + Hygiene

(DW60M5040BB/DW60M5040FS) (DW60M5040FW)

Rinse

Hot Rinse 70 °C

Drying

5/20 133 1.10 9.5

Main Wash 46 °C

Delicate + Half load

(DW60M5040BB/DW60M5040FS) (DW60M5040FW)

Rinse

Hot Rinse 55 °C

Drying

5/20 124 0.70 9.5

Main Wash 46 °C

Delicate + Rinse Add

(DW60M5040BB/DW60M5040FS) (DW60M5040FW)

Rinse

Hot Rinse 55 °C

Drying

5/20 139 1.0 12.2

Pre Wash 50 °C

Express

Main Wash 50 °C

Hot Rinse 60 °C

5/20 60 1.03 9.6

Drying

Pre Wash 50 °C

Express + Hygiene

Main Wash 50 °C

Hot Rinse 70 °C

5/20 66 1.20 9.6

Drying

Pre Wash 50 °C

Express + Half load

Main Wash 50 °C

Hot Rinse 60 °C

5/20 60 0.90 9.6

Drying

Pre Wash 50 °C

Express + Rinse Add

Main Wash 50 °C

Hot Rinse 60 °C

5/20 73 1.15 12.3

Drying

* EN 50242: The information for comparability test in accordance with EN50242,as follows:

• Capacity: 13 settings

• Position of upper basket: Lower position

• Rinse aid setting: 6

Water (L)

05 STARTING A WASHING PROGRAMME

DW4000KM-00000A-00_EN (Basic)_160323.indd 25

Starting a Washing Programme _33

Page 34

The wash time varies depending on the pressure and temperature of the supplied water.

Quick Wash, Express, Pre Wash: Continuous use of the Quick Wash, Express, Pre Wash cycles for an extended time is not recommended. This may reduce the performance of the water softener.

Wash cycle table（14 Place setting）

( DW60M5060BB/DW60M5060FS

Program Description of cycle

AUTO

AUTO+ Hygiene

AUTO+ Rinse Add

Intensive

Intensive + Hygiene

Intensive + Half load

Intensive + Rinse Add

Eco

Eco + Hygiene

34_ Starting a Washing Programme

/DW60M5060FW )

Pre Wash 40 °C

Main Wash 40°C-60 °C

Rinse

Hot Rinse 65 °C

Drying

Pre Wash 40 °C

Main Wash 40°C-60 °C

Rinse

Hot Rinse 70 °C

Drying

Pre Wash 40 °C

Main Wash 40°C-60 °C

Rinse

Hot Rinse 65 °C

Drying

Pre Wash 40 °C

Main Wash 60 °C

Rinse

Hot Rinse 65 °C

Drying

Pre Wash 40 °C

Main Wash 60 °C

Rinse

Hot Rinse 70 °C

Drying

Pre Wash 40 °C

Main Wash 60 °C

Rinse

Hot Rinse 65 °C

Drying

Pre Wash 40 °C

Main Wash 60 °C

Rinse

Hot Rinse 65 °C

Drying

Pre Wash

Main Wash 45 °C

Rinse

Hot Rinse 63 °C

Drying

Pre Wash

Main Wash 45 °C

Rinse

Hot Rinse 70 °C

Drying

Detergent (g)

(Pre wash / Main wash)

5/30

5/30 213 1.68 15.3

5/30 213 1.38 15.3

5/30 251 1.88 18.0

5/30 211

5/30 216 1.20

Running time

(min)

140-228 0.93-1.95 6.5-18

145-238 1.03-2.05 6.5-18

140-228 1.52-1.95 9.2-18

Energy

(KWh)

Water (L)

121.06

DW4000KM-00000A-00_EN (Basic)_160323.indd 24

Page 35

Program Description of cycle

Pre Wash

Eco + Half load

Eco + Rinse Add

Delicate

Delicate + Hygiene

Delicate + Half load

Delicate + Rinse Add

Express

Express + Hygiene

Express + Half load

Express + Rinse Add

Main Wash 45 °C

Hot Rinse 63 °C

Pre Wash

Main Wash 45°C

Hot Rinse 63 °C

Main Wash 46 °C

Hot Rinse 55 °C

Main Wash 46 °C

Hot Rinse 70 °C

Main Wash 46 °C

Hot Rinse 55 °C

Main Wash 46 °C

Hot Rinse 55 °C

Pre Wash 50 °C

Main Wash 50 °C

Hot Rinse 60 °C

Pre Wash 50 °C

Main Wash 50 °C

Hot Rinse 70 °C

Pre Wash 50 °C

Main Wash 50 °C

Hot Rinse 60 °C

Pre Wash 50 °C

Main Wash 50 °C

Hot Rinse 60 °C

Rinse

Drying

Rinse

Drying

Rinse

Drying

Rinse

Drying

Rinse

Drying

Rinse

Drying

Detergent (g)

(Pre wash / Main wash)

5/30 12

5/30 229 1.20 14.3

5/20 124 0.80 9.5

5/20 133 1.20 9.5

5/20 124 0.70 9.5

5/20 139 1.0

5/20 60 1.05 9.6

5/20 66 1.20 9.6

5/20 60 0.90 9.6

5/20 73 1.16 12.3

Running time

(min)

211 0.90

Energy

(KWh)

Water (L)

05 STARTING A WASHING PROGRAMME

12.2

DW4000KM-00000A-00_EN (Basic)_160323.indd 25

Starting a Washing Programme _35

Page 36

Starting a washing programme

Program Description of cycle

Quick Wash

Quick Wash + Hygiene

Quick Wash + Half load

Quick Wash + Rinse Add

hsaW erP

Main Wash 40 °C

Hot Rinse 50 °C

Hot Rinse 70 °C

Hot Rinse 50 °C

Detergent (g)

(Pre wash / Main wash)

5/15

Running time

(min)

40 0.60 6.6

49 0.95 6.6

40 0.50 6.6

53 0.78 9.3

Energy

(KWh)

Water (L)

9.310.021-hsaW erP

* EN 50242: The information for comparability test in accordance with EN50242,as follows:

• Capacity: 14 settings

• Position of upper basket: Lower position

• Rinse aid setting: 6

The wash time varies depending on the pressure and temperature of the supplied water.

Quick Wash, Express, Pre Wash: Continuous use of the Quick Wash, Express, Pre Wash cycles for an extended time is not recommended. This may reduce the performance of the water softener.

Turning on the appliance

Starting a wash cycle...

1. Draw out the lower and upper basket, load the dishes and push them back.

It is recommended to load the lower basket ﬁ rst, then the upper one (see the section entitled "Loading the dishwasher racks").

2. Pour in the detergent (see the section entitled "Loading the Salt into the Softener").

3. Insert the plug into the socket. The power supply is 220-240 V AC 50 Hz, the speciﬁ cation of the socket

is 10 A 250 VAC. 50 Hz.

4. Make sure that the water supply is turned on to full pressure. Close the door, press the "Power" button,

Press the "Program” button to select a desired "Wash cycle". (See the section entitled "Wash Cycle Table"). With a little force to ensure the door is properly closed.

A click could be heard when the door is closed perfectly.

36_ Starting a Washing Programme

DW4000KM-00000A-00_EN (Basic)_160323.indd 26

Page 37

Change the programme

Premise:

1. A cycle that is underway can only be modiﬁ ed if it has only been running for a short time. Otherwise,

the detergent may have already been released, and the appliance may have already drained the wash water. If this is the case, the detergent dispenser must be reﬁ lled (see the section entitled "Fill in the Detergent").

2. Press ”Power” button or "reset" button 3 seconds to cancel the programme, and turn on it again, then

you can change the programme to the desired cycle setting (see the section entitled "Starting a wash cycle...") or press programme button while you press "reset" button.

If you open the door when washing, the machine pauses and warning alarm rings, the display appears E1. When you close the door, the machine will keep on working after 10 seconds.

These programme lights show the state of the dishwasher:

a) One of the programme lights on --> cycle running b) One of the programme lights blinking --> pause

power and water supply before calling a service.

Forget to add dish

A forgotten dish can be added any time before the detergent cup opens

1. Open the door a little to stop the washing.

2. After the spray arms stop working, you can open the door completely.

3. Add forgotten dishes.

4. Close the door, the dishwasher will work after ten seconds.

WARNING: It is dangerous to open the door when washing, because the hot water may scald you.

Switch o the Dishwasher

The digital display appears "---" and the buzzer rings 6 times, only in this case the programme has ended.

the dishwasher by pressing the "Power" button.

the water tap!

Open the door carefully. Hot steam may escape when the door is opened!

• Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down around 15 minutes before removing from the appliance.

• Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way they will be cooler and the drying will be improved.

05 STARTING A WASHING PROGRAMME

Unloading the dishwasher

It is normal that the dishwasher is wet inside. Empty the lower basket ﬁrst and then the upper one. This will avoid water dripping from the upper basket onto the dishes in the lower one.

DW4000KM-00000A-00_EN (Basic)_160323.indd 27

Starting a Washing Programme _37

Page 38

Maintenance and cleaning

Filtering system

The ﬁlter is used to avoid the big remnants and other sundries getting inside the pump. The residue can obstruct the ﬁlter in sometime.

The ﬁlter system consists of a coarse ﬁlter, a ﬂat (Main ﬁlter) and a micro ﬁlter (ﬁne ﬁlter).

1. Fine ﬁ lter: Food and debris will be trapped by a special jet on the

lower spray arm.

2. Coarse ﬁ lter: Big debris, such as bone and glass that could clog the

drain will be trapped in the coarse ﬁ lter. To remove an item caught in this ﬁ lter, gently squeeze the taps on the top of this ﬁ lter and lift it out.

3. Micro ﬁ lter: This ﬁ lter holds soil and food residue in the sump area

and prevents it from being redeposit on the dishes during a cycle.

- Inspect the ﬁlters for obstructions every time the dishwasher has been used.

- By unscrewing the coarse ﬁlter, you can remove the ﬁlter system. Remove any food remnants and clean the ﬁlters under running water.

Step 1 Contrarotate the Coarse ﬁlter ,and then lift it up; Step 2 L ift the Flat ﬁlter up

If operate from step 1 to step 2, the ﬁlter system will be removed; while operate from step 2 to step 1, the ﬁlter system will be installed.

Filter assembly

particles from the wash water, allowing it to be recirculated during the cycle. For this reason, it is a good idea to remove the larger food particles trapped in the ﬁlter after each wash cycle by rinsing the semicircular ﬁlter and cup under running water. To remove the ﬁlter assembly, pull on the cup handle in the upward direction. The entire ﬁlter assembly should be cleaned once a week. To clean the coarse ﬁlter and the micro ﬁlter, use a cleaning brush. Then, reassemble the ﬁlter parts as shown in the ﬁgures above and reinsert the entire assembly in the dishwasher, positioning in its seat and pressing downward. The dishwasher must never be used without the ﬁlters. Improper replacement of the ﬁlter may reduce the performance level of the appliance and damage dishes and utensils.

WARNING: Never run the dishwasher without the ﬁlters in place. When cleaning the ﬁlters, don't knock on them. Otherwise, the ﬁlters could be contorted and the performance of dishwasher could be debased.

38 _ Maintenance and cleaning

DW4000KM-00000A-00_EN (Basic)_160323.indd

Page 39

Cleaning the spray arms

It is necessary to clean the spray arms regularly for hard water chemicals will clog the spray arm jets and bearings. To remove the spray arms, screw

remove the arm. Wash the arms in soapy and warm water and use a soft brush to clean the jets. Replace them after rinsing thoroughly.

Caring for the dishwasher

To clean the control panel, use a lightly dampened cloth then dry thoroughly. To clean the exterior, use a good appliance polish wax. Never use sharp objects, scouring pads or harsh

cleaners on any part of the dishwasher.

Protect against freezing

If your dishwasher is left in an unheated place during the winter, ask a service technical to:

3. Drain water from the inlet pipe and water valve. (Use a pan to catch the water)

4. Reconnect the water inlet pipe to the water valve.

5. Remove the ﬁ lter in the tub and the bottom and use a sponge to use up water in sump.

electrical power to the dishwasher.

the water supply and disconnect the water inlet pipe from the water valve.

06 MAINTENANCE AND CLEANING

Cleaning the door

To clean the edge around the door, you should use only a soft warm, damp rag. To prevent penetration of water into the door lock and electrical components, do not use a spray cleaner of any kind.

Also, never use abrasive cleaners or scouring pads on the outer surfaces because they will scratch the ﬁnish. Some papers towels can also scratch or leave marks on the surface.

WARNING: Never use a spray cleaner to clean the door panel for it could damage the door lock and electrical components. It is not allowed to use the abrasive agent or some paper towel because of the risk of scratching or leaving spots on the stainless steel surface.

Maintenance and cleaning _39

DW4000KM-00000A-00_EN (Basic)_160323.indd 29

Page 40

Maintenance and cleaning

How to keep your dishwasher in shape

• After Every Wash

moisture and odors are not trapped inside.

• Remove the Plug

Before cleaning or performing maintenance, always remove the plug from the socket. Do not run risks.

• No Solvents or Abrasive Cleaning

To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning products. Use only a cloth and warm soapy water. To remove spots or stains from the surface of the interior, use a cloth dampened with water and a little white vinegar, or a cleaning product made speciﬁcally for dishwashers.

• When You Go on holiday

When you go on holiday, it is recommended that you run a wash cycle with the dishwasher empty and

slightly ajar. This will help the seals last longer and prevent odors from forming in the appliance.

• Moving the Appliance

If the appliance must be moved, try to keep it in the vertical position. If absolutely necessary, it can be positioned on its back.

• Seals

One of the factors that cause odors to form in the dishwasher is food that remains trapped in the seals. Periodic cleaning with a damp sponge will prevent this.

40_ Maintenance and cleaning

DW4000KM-00000A-00_EN (Basic)_160323.indd 30

Page 41

Installation instruction

WARNING : Electrical Shock Hazard!

Disconnect electrical power before installing dishwasher. Failure to do so can result in death or electrical shock.

CAUTION: The installation of the pipes and electrical equipment should be done by professionals.

• Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away

or moved, please ensure the manual is kept with the machine, so that the new owner may beneﬁt from the advice contained within it.

• Please read this instruction manual carefully: it contains important information regarding the safe

installation, use and maintenance of the appliance.

• If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it

may be tilted onto its back.

Positioning and leveling

1. Remove the appliance from all packaging and check that it has not been damaged during

transportation. If it has been damaged, contact the retailer and do not proceed and further with the installation process.

2. Check the dishwasher by placing it so that its sides or back panel are in contact with the adjacent

cabinets or even with the wall. This appliance can also be recessed under a single worktop (see the Assembly instruction sheet).

3. Position the dishwasher on a level and sturdy ﬂ oor. If the ﬂ oor is uneven, the front feet of the appliance

may be adjusted until it reaches a horizontal position (the angle of inclination must not exceed 2 degrees). If the appliance is levelled correctly, it will be more stable and much less likely to move or cause vibrations and noise while it is operation.

Connecting the water and electricity supplies

• Connection to the water and electricity supplies should only be performed by a qualiﬁed technician.

• The dishwasher should not stand on top of the water hoses or the electricity supply cable.

• The appliance must be connected to the water supply network using new piping. Do not use old

piping.

Connecting the water inlet hose

Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure that it is fastened tightly in place. If the water pipes are new or have not been used for an extended period of time, let the water run to make sure that the water is clear and free of impurities. If this precaution is not taken, there is a risk that the water inlet can get blocked and the appliance could be damaged.

07 INSTALLATION INSTRUCTION

DW4000KM-00000A-00_EN (Basic)_160323.indd 31

Installation Instruction _41

Page 42

Installation instruction

Connecting the water outlet hose

Fit the drainage hose of your machine to the drainage pipe without bending.

authorized service for an extension made from the same material as the original. Remember that the length of the hose should not exceed 4meters even when with an extension. If the drainage hose is longer the 4 m. the dishes will not be cleaned properly secure your hose ﬁrmly to the drainage pipe

Electrical connection

Before inserting the plug into the electrical socket, make sure that:

• the socket is earthed and complies with current regulations;

• the socket can withstand the maximum load of the appliance, which is indicated on the data

plate located on the inside of the door(see description of the appliance);

• the power supply voltage falls within the values indicated on the data plate on the inside of the door;

• the socket is compatible with the plug of the appliance. If this is not the case, ask an authorized technician to replace the plug (see assistance); do not use extension cables or multiple sockets.

• Once the appliance has been installed, the power supply cable and the electrical socket should be easily accessible.

• The cable should not be bent or compressed.

• If the power supply cable is damaged, it must be replaced by the manufacturer or its

Technical Assistance Service in order to prevent all potential hazards.(See Assistance)

• The company shall not be held responsible for any incidents that occur if these regulations are not observed.

Max 1000 mm

Min 400 mm

Min 120 mm

Min ø40 mm

42_ Installation Instruction

DW4000KM-00000A-00_EN (Basic)_160323.indd 32

Page 43

Advice regarding the ﬁrst wash cycle

After the appliance has been installed, immediately before running the ﬁrst wash cycle, completely ﬁll the salt dispenser with and add approximately 1.2 Kg of salt (see Rinse aid and reﬁned salt). The water may overﬂow: this is normal and is not a cause for concern. It is also normal that the LOW SALT indicator light continues to ﬂash for a few cycles after the salt has been loaded.

Positioning the appliance

Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to facilitate proper installation.

Leveling the appliance

Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the height of the dishwasher, making it level. In any case, the appliance should not be inclined more than 2.

The maximum adjustment height of the feet is 20 mm.

How to drain excess water from hoses

If the sink is 1000mm higher from the ﬂoor, the excess water in hoses cannot be drained directly into the sink. It will be necessary to drain excess water from hoses into a bowl or a suitable container that is held outside and lower than the sink.

Water outlet

Connect the water drain hose. The drain hose must be correctly ﬁtted to avoid water leaks. Ensure that the water inlet hose is not kinked or squashed.

Extension hose

If you need a drain hose extension, observe to use a similar drain hose.

reduced.

07 INSTALLATION INSTRUCTION

Syphon connection

The waste connection must be at a height of between 50cm (minimum) and 100cm (maximum) from the bottom of the dish. The water drain hose should be ﬁxed by a hose clip.

DW4000KM-00000A-00_EN (Basic)_160323.indd 33

Installation Instruction _43

Page 44

Installation instruction

Built-in dishwasher

WARNING : Electrical Shock Hazard!

Disconnect electrical power before installing dishwasher. Failure to do so can result in death or electrical shock.

CAUTION: Water pipe and electric device should be installed by professionals

Step 1. Before installation

• Dishwasher place requirement. The back of dishwasher should face to the wall, and the dishwasher has inlet and outlet pipe, which can be connected on the right or left side conveniently.

• To protect the cabinet from steam, attach the protective ﬁlm under the cabinet as shown.

• The dimensions of installation Cabinet.

44_ Installation Instruction

DW4000KM-00000A-00_EN (Basic)_160323.indd 34

The co nne ctors for po wer c ord and in let /outl et

810-880mm

hose

580mm(Min.)

Install the di shw ash er in to the cabinet

600mm(Min.)

Page 45

596

07 INSTALLATION INSTRUCTION

654

805

594

558

5 4 1

Step 2. The dimension of the front ornamental plate

4-4 x44wo oden scr ews

the hole w ith 10m m depth

2- 2

540

594

658min

708max

Step 3. Fix the ornamental plate

The pl ug with T sh ape

2-4×26 woode n screw

4-4×44 woode n screw

DW4000KM-00000A-00_EN (Basic)_160323.indd 35

enta l plate ( 3~7KG )

① remo ve 2-ST 4X10

② ST 4-4×44 woode n screw

the do or of dis hwash er

Installation Instruction _45

Page 46

Installation instruction

Step 4. Tension adjustment of the door spring

After placed the panel on the dishwasher, please try open and close the door to test the balance to check out whether the door can remain a same place. If not, please adjusting the screw in the direction of clockwise or counter-clockwise to adjust the balance of the door. Or it has been adjusted.

Hexn ut tool s CR-V 4 mm

30°~90°b alanc e

3~7K G

Step 5. Connecting the water inlet hose (for cold water)

Connection the cold water supply hose to a threaded 3/4(inch) connector and make sure that it is fastened tightly in place.

If the water hoses are new or have not been used for an extended period of time, let the water run to make sure that the water is clear and free of impurities, If this precaution is not taken, there is a risk that the water inlet can get blocked and the appliance could be damaged.

Step 5-1. Electrical connection

Make sure the socket is compatible with the plug of the appliance, The socket must have ground wire and can hold 250V/10A, otherwise damage or accidence may occur,Other electric appliance with big power can not use the same socket with the dishwasher.

46_ Installation Instruction

DW4000KM-00000A-00_EN (Basic)_160323.indd 36

Page 47

Step 6. Connecting the water outlet hose

Put the hose into drainage hose which diameter is more than 40 mm or into the sink, both should make sure the outlet pipe is straight ,and the height of the end of pipe should be less than 1000 mm.

Note: The connector of the outlet pipe should be tight.

Dra in hose h ook

sin k

Max :1000 mm

out let hos e

Min :40mm

Min :400m m

Step 7. Level adjustment

Allowable slope under entire dishwasher is 2 degree. Adjust the height by turning the feet to make sure the dishwasher is level.

07 INSTALLATION INSTRUCTION

+ - + -

Adju st t he f ro nt f ee t

DW4000KM-00000A-00_EN (Basic)_160323.indd 37

Adju st t he b ac k fe et

Installation Instruction _47

Page 48

Installation instruction

Step 8. Installation of skirting board

658 min

708 max

Serial

number

1 mm 57mm 807

Note: The required height of the skirting board is as per the principle of aesthetic and opening closing

the door smoothly, Please check the suggested chart for the reference.

ornamental plate Plate to ornament the skirting board

ornamental plate

75 min

125 max

plate the skirting board

Referenced dimension(Fully built in)

mm 58mm 896

mm 59mm 886

mm 501mm 876

mm 511mm 866

mm 521mm 856

48_ Installation Instruction

DW4000KM-00000A-00_EN (Basic)_160323.indd 38

Page 49

Step 9. Fixation of dishwasher

1. Fixing the dishwasher with the cabinet by turning the screws.

2. Plug the four hole plugs into the holes in the sketch map.

ST 4 * 2 6

hole plug

Dishwasher liner right and left side and the top 4 holes, use wood screws ST4*26 dishwasher ﬁxed on the cabinet. (Self-tapping screws were matching.)

07 INSTALLATION INSTRUCTION

Start of dishwasher

1. The followings should be checked before starting the dishwasher:

2. Whether the dishwasher is level and ﬁ xed

3. Whether the inlet valve is opened

4. Whether there is leakage at the connections of the conducts

5. Whether the wires are tightly connected

6. Whether the power is switched on

7. Whether the inlet and drain hoses are knotted

8. All packing materials and printings should be taken out from the dishwasher

CAUTION: After installation, please put this manual into the bags of printings. The content of this manual is very helpful to the user

DW4000KM-00000A-00_EN (Basic)_160323.indd 39

Installation Instruction _49

Page 50

Troubleshooting tips

Information codes

( DW60M5060BB DW60M5060FS/W DW60M5040BB DW60M5040FS/W )

When some malfunctions happen, the appliance will display information codes to warn you.

sesuaC elbissoPsgninaeMsedoC

dC Door open The door is opened when the dishwasher is operating

4C Water inlet

5C Water drainage

Water inlet malfunction

Water drainage malfunction

Temperature sensor malfunction

oC Overﬂow/leakage

LC Water leakage

HC Heating element

Information codes

( DW60M5030FS/W DW60M5010FS/W )

Overﬂow occurs/Water leakage occurs

Water leakage occurs

Abnormal heating

When some malfunctions happen, the appliance will display information codes to warn you.

sesuaC elbissoPsgninaeMsedoC

LED1+LED2 ﬂashing

LED1+LED20 ﬂashing

LED2+LED20 ﬂashing

LED25+ LED18 ﬂashing

LED25+ LED19 ﬂashing

LED1+LED2+LED18 ﬂashing

LED1+LED2+LED19 ﬂashing

Door open The door is opened when the dishwasher is operating

Water inlet

Water drainage

Water inlet malfunction

Water drainage malfunction

Temperature sensor malfunction

Overﬂow/leakage

Water leakage

Heating element

Overﬂow occurs/Water leakage occurs

Water leakage occurs

Abnormal heating

LED3 LED20 LED18

LED1 LED2

WARNING

in the base pan because of an overﬁll or small leak, the water should be removed before restarting the dishwasher.

50_ Troubleshooting Tips

DW4000KM-00000A-00_EN (Basic)_160323.indd 40

LED7 LED8 LED17

LED19 LED21 LED14LED25

Page 51

Before calling for service

Reviewing the charts on the following pages may make you be free of calling for service.

Dishwasher doesn’t run

Drain pump doesn’t stop

Noise • Some audible sounds are

Suds in the tub • Improper detergent. • Use only the special dishwasher detergent

Stained tub interior • Detergent with colorant

Dishes and ﬂatware not clean

• Fuse blown or the circuit breaker acted.

• Power supply is not turned on.

• Water pressure is low. • Check that the water supply is connected

• Overﬂow. • The system is designed to detect an

normal.

• Utensils are not secure in the baskets or something small has dropped into the basket.

• Motor hums. • Dishwasher has not been used regularly. If

• Spilled rinse agent. • Always wipe up rinse agent spills

was used.

• Improper program. • Select a more intensive wash program.

• Improper rack loading. • Make sure that the action of the detergent

• Replace fuse or reset circuit breaker.

Remove any other appliances sharing the same circuit with the dishwasher.

• Make sure the dishwasher is turned on and the door is closed securely. Make sure the power cord is properly plugged into the wall socket.

properly and the water is turned on.

circulation pump and turns on the drain pump.

• Sound from soft food shredding action and detergent cup opening.

• To ensure everything is secured in the dishwasher.

you do not use it often, remember to set it to ﬁll and pump out every week, which will help keep the seal moist.

to avoid suds.

• If this occurs, open the dishwasher and let suds evaporate.

• Add 1 gallon of cold water to the tub. Close and latch the dishwasher, then start the “soak” wash cycle to drain out the water. Repeat if necessary.

immediately.

• Make sure that the detergent is the one without colorant.

dispenser and spray arms are not blocked by large dishware.

oD oT tahWsesuaC elbissoPmelborP

08 TROUBLESHOOTING TIPS

DW4000KM-00000A-00_EN (Basic)_160323.indd 41

Troubleshooting Tips _51

Page 52

Troubleshooting tips

Spots and ﬁlming on glasses and ﬂatware

Cloudiness on glassware

Yellow or brown ﬁlm on inside surfaces

White ﬁlm on inside surface

The Detergent dispenser lid cannot be closed properly

Detergent left in dispenser cups

Steam • Normal phenomenon. • There is some steam coming through the

Black or gray marks on dishes

Water standing in the bottom of the tub

Dishwasher leaks • Overﬁll dispenser or rinse

1. Extremely hard water.

2. Low inlet temperature.

3. Overloading the

dishwasher.

4. Improper loading.

5. Old or damp powder

detergent.

6. Empty rinse agent

dispenser.

7. Incorrect dosage of

detergent.

• Combination of soft water and too much detergent.

• Iron deposits in water can cause an overall ﬁlm.

• Hard water minerals. • To clean the interior, use a damp sponge

• Clogged detergent re

-sidue is blocking the catch

• Dishes block detergent cups.

• Aluminum utensils have rubbed against dishes.

• This is normal. • A small amount of clean water around the

aid spills.

• Dishwasher isn't level. • Make sure the dishwasher is level.

To remove spots from glassware:

1. Take out all metal utensils out of the

dishwasher.

2. Do not add detergent.

3. Choose the longest cycle.

4. Start the dishwasher and allow it to run for

about 18 to 22 minutes, then it will be in the main wash.

5. Open the door to pour 2 cups of white

vinegar into the bottom of the dishwasher.

6. Close the door and let the dishwasher

complete the cycle. If the vinegar does not work: Repeat as above, except use 1/4 cup (60 ml) of citric acid crystals instead of vinegar.

• Use less detergent if you have soft water and select a shortest cycle to wash the glassware and to get them clean.

3 cups warm water to remove the stains by hand.

WARNING: You have to wait for 20 minutes after a cycle to let the heating elements cool down before cleaning interior; Failing to follow this instruct may result in the risk of burns.

• You have to call a water softener company for a special ﬁlter.

with dishwasher detergent and wear rubber gloves. Never use any other cleaner than dishwasher detergent for the risk of foaming or suds.

• Clean the detergent from the catch.

• Re-loading the dishes properly.

vent by the door latch during drying and water draining.

• Use a mild abrasive cleaner to eliminate those marks.

outlet on the tub bottom keeps the water seal lubricated.

• Be careful not to overﬁll the rinse aid dispenser. Spilled rinse aid could cause overusing and lead to overﬂowing. Wipe away any spills with a damp cloth.

oD oT tahWsesuaC elbissoPmelborP

52_ Troubleshooting Tips

DW4000KM-00000A-00_EN (Basic)_160323.indd 42

Page 53

Appendix

Speciﬁcations

Model

Type Built-in Dishwasher

Power

Water pressure 0.04-1.0 Mpa 0.04-1.0 Mpa Rated power usage 1750-2000 W 1750-2000 W Hot water connection Max 60 °C Max 60 °C Dry type Condensed dry system Condensed dry system

Wash type Rotating nozzle spray Rotating nozzle spray Dimensions (mm)

(Width x Depth x Height)

Wash capacity

Weight (Unpacked)

Weight (Packed)

DW60M5060BB DW60M5040BB

220-240 V /

50 Hz AC only

596 x 558 x 805 596 x 600 x 835

13 place setting

(DW60M5040BB)

14 place setting

(DW60M5060BB)

37.5Kg

(DW60M5040BB)

40Kg

(DW60M5060BB)

43Kg

(DW60M5040BB)

44.5Kg

(DW60M5060BB)

DW60M5060 DW60M5040 DW60M5030 DW60M5010

(DW60M5010FS/DW60M5010FW/DW60M5030FS

DW60M5030FW/DW60M5040FS/DW60M5040FW)

(DW60M5010FS/DW60M5010FW/DW60M5030FS DW60M5030FW/DW60M5040FS/DW60M5040FW)

(DW60M5060FS/DW60M5060FW)

(DW60M5010FS/DW60M5010FW/DW60M5030FS DW60M5030FW/DW60M5040FS/DW60M5040FW)

(DW60M5060FS/DW60M5060FW)

DW60M5060

DW60M5040

DW60M5030

DW60M5010

Free standing

50 Hz AC only

13 place setting

14 place setting

(DW60M5060FS/DW60M5060FW)

Dishwasher

220-240 V /

44.5Kg

47Kg

50Kg

52.5Kg

FW FW FW FW

09 APPENDIX

Product dimension

DW60M5060BB DW60M5040BB

DW4000KM-00000A-00_EN (Basic)_160323.indd 43

1150

558

805

596

600

1175

DW60M5060 DW60M5040 DW60M5030 DW60M5010

FS FS FS FS

DW60M5060 DW60M5040 DW60M5030 DW60M5010

596

835

FW FW FW FW

Appendix _53

Page 54

Product ﬁche

REGULATION (EU) No 1059/2010

Supplier

Model name

Rated Capacity (place setting)

Annual energy consumption,

(AE c) (kWh/year)

DW60M5060BB DW60M5060FS DW60M5060FW

299

G SAMSUNG SAMSUNG

SAMSUNSAMSUN

DW60M5040BB DW60M5040FS DW60M5040FW

13 13 13

A++ A+ A+

295 295 295

DW60M5030FS DW60M5030FW

DW60M5010FS DW60M5010FW

Standard cycle energy consumption,

(E t) (kWh)

Power consumption in left-on

mode, P l (W)

Annual water consumption, (AW c) (L/year)

Standard programme

Programme time for the standard cycle, (min)

Duration of the left-on mode, (T l) (min)

Airborne acoustical noise emissions

re 1pW)

(dBA

Supplier

Model name

Installation

Built-in Built-under Free standing

SAMSUNG

DW60M5060BB DW60M5040BB

Yes

1.06

0.49

0.9

3360

Eco

211

Unlimited

SAMSUNG SAMSUNG SAMSUNG SAMSUNG SAMSUNG

DW60M5060FS

DW60M5060FW

Yes

1.03 1.03 1.03

0.49 0.40 0.40

0.9 0.49 0.49

3360 3360 3920

A A A

Eco Eco Eco

211 211 211

Unlimited Unlimited Unlimited

4846 48 52

Yes

DW60M5030FS

DW60M5030FW

Yes

DW60M5040FS

DW60M5040FW

DW60M5010FS

DW60M5010FW

Yes

1) based on 280 standard cleaning cycles using cold water ﬁll and the consumption of the low power modes. Actual energy consumption will depend on how the appliance is used.

2) based on 280 standard cleaning cycles. Actual water consumption will depend on how the appliance is used.

3) ‘Standard programme’ is the standard cleaning cycle which is suitable to clean normally soiled

consumption.

4) The wash time varies depending on the pressure and temperature of the supplied water.

54_ Product ﬁche

DW4000KM-00000A-00_EN (Basic)_160323.indd 44

Page 55

Terminology for dishwasher

1. Circulation Motor

2. Drain Pump

3. Heater

4. Flow Meter

5. Distributor

6. Dispenser

7. Tub Assy

8. Sump Assy

9. Tub Front Assy

10. Base Assy A plastic part that makes up the basic bottom framework.

11. Basket Assy The upper and lower racks where dishes can be loaded.

12.

Top/Middle/Lower Nozzles

13. Case Brake

14. Door Lock Switch

A motor that sucks the water remaining on the ﬂoor of the dishwater and infects water using high pressure through the internal water passages to the top Middle and lower nozzles.

The pump that drains the polluted water from the dishwater generated while the dishwater is running.

The healer is located on the water passages inside the dishwasher. It heats

Measure the amount of supplied water by counting the pulses of the hall IC located at the next of the inlet valve.

Located at the output end of the sump inside the dishwasher. It turns the

(This model does not have this part)

The location where the detergent and rinse aids are stored so they can be used by the dishwasher. The dispenser automatically supplies detergent and rinse aids to the inside of the dishwasher when they are needed.

An internal case mode of stainless steel that makes up the basic framework of the dishwasher.

The place inside the dishwasher where water is collected. The injected water gathers here after circulation. The sump Assy is connected to the circulation motor and drain pump.

An internal case made of stainless steel that makes up internal part of the front door.

Washes dishes by rotating and injecting the supplied water through the water passage at high pressure.

A passage that adjusts the air pressure by connecting the pressure of the inside air which is expanded at high temperature during wash and rinse cycles and the outside air pressure.

Detects whether the door of the dishwasher is open or closed if the door is open while the dishwasher is running the cycle is temporary stopped.

DW4000KM-00000A-00_EN (Basic)_160323.indd 45

Terminology for dishwasher _55

Page 56

Note

DW4000KM-00000A-00_EN (Basic)_160323.indd 46DW4000KM-00000A-00_EN (Basic)_160323.indd 46 2016-03-23  1:14:362016-03-23  1:14:36

Page 57

Note

DW4000KM-00000A-00_EN (Basic)_160323.indd 47DW4000KM-00000A-00_EN (Basic)_160323.indd 47 2016-03-23  1:14:362016-03-23  1:14:36

Page 58

Note

DW4000KM-00000A-00_EN (Basic)_160323.indd 46DW4000KM-00000A-00_EN (Basic)_160323.indd 46 2016-03-23  1:14:362016-03-23  1:14:36

Page 59

Note

DW4000KM-00000A-00_EN (Basic)_160323.indd 47DW4000KM-00000A-00_EN (Basic)_160323.indd 47 2016-03-23  1:14:362016-03-23  1:14:36

Page 60

QUESTIONS OR COMMENTS

COUNTRY CALL OR VISIT US ONLINE AT

SOUTH AFRICA

ZAMBIA

MAURITIUS

ANGOLA

MOZAMBIQUE

IRELAND (EIRE)

0860 SAMSUNG (726 7864)

0211 350 370

800 2550

917 267 864

847267864

0330 SAMSUNG (7267864)

0818 717100

www.samsung.com/support

www.samsung.com/uk/support www.samsung.com/ie/support

Code No.:

DW4000KM-00000A-00_EN (Basic)_160323.indd 48DW4000KM-00000A-00_EN (Basic)_160323.indd 48 2016-03-23  1:14:362016-03-23  1:14:36

DD81-02171E-00