Samsung DVD-P250K User Manual [fr]

DVD Player

ELECTRONICS

Lecteur DVD

Reproductor de DVD

DVD-P250K

AK68-00604P

ENG FRA SPA

STANDBY/ON

LOADINGPLAY

EZ VIEW

STANDBY/ON

LOADINGPLAY

EZ VIEW

STANDBY/ON

LOADINGPLAY

EZ VIEW

STANDBY/ON

LOADINGPLAY

EZ VIEW

Precautions

1. Setting up

- Refer to the identification label located on the rear of your player for its proper operating voltage.

- Install your player in a cabinet with adequate ventilation holes. (7~10cm) Do not block ventilation holes on any of the components for air circulation.

- Do not push the disc tray in by hand.

- Do not stack components.

- Be sure to turn all components off before moving the player.

- Before connecting other components to this player, be sure to turn them off.

- Be sure to remove the disc and turn off the player after use, especially if you don’t use it for a long time.

2. For your safety

- This product utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

- Do not open covers and do not repair yourself. Refer servicing to qualified personal.

3. Caution

5. Environmental info

- The battery used in this product contains chemicals that are harmful to the environment.

- So, dispose of batteries in the proper manner, according to federal, state, and local regulations.

The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for commercial use. The license does not cover any product unit other than this product unit and the license does not extend to any unlicensed product unit or process conforming to ISO/OUR 11172-3 or ISO/OUR 13818-3 used or sold in combination with this product unit. The license only covers the use of this product unit to encode and/or decode audio files conforming to the ISO/OUR 11172-3 or ISO/OUR 13818-3. No rights are granted under this license for product features or functions that do not conform to the ISO/OUR 11172-3 or ISO/OUR 13818-3.

CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

- Your player is not intended for industrial use but for domestic purposes. Use of this product is for personal use only.

- Do not put any container filled with liquid or any small metal objects on the player.

- Exterior influences such as lightning and static electricity can affect normal operation of this player. If this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the AC power cord to the AC power outlet. The player will operate normally.

- When condensation forms inside the player due to sharp changes in temperature, the player may not operate correctly. If this occurs, leave the player at room temperature until the inside of the player becomes dry and operational.

4. Disc

- Do not clean record-cleaning sprays, benzene, thinner, or other volatile solvents that may cause damage to the disc surface.

- Do not touch the disc’s signal surface. Hold by the edges or by one edge and the hole in the center.

- Wipe the dirt away gently; never wipe a cloth back and forth over the disc.

ENG-2 ENG-3

Before you start

TABLE OF C ONTENTS

Accessories

Remote

Control

Batteries for

Remote Control

User’s

Manual

(AAA Size)

Install Batteries in the Remote control

Open the battery cover on the back of the remote control.

Insert two AAA batteries. Make sure that the polarities (+ and -) are aligned correctly.

Replace the battery cover.

If the remote control doesn’t operate properly

- Check the polarity + - of the batteries (Dry-Cell)

- Check if the batteries are drained.

- Check if remote control sensor is blocked by obstacles.

- Check if there is any fluorescent lighting nearby.

Video/Audio

Cable

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Chapter 1:

Setup

General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Disc Type and Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Tour of the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Chapter 2: Connections

Choosing a Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Chapter 3: Basic Functions

Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Using the Search and Skip Functions . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Using the Display Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Using the Disc and Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Using the Function Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Slow Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Program Play & Random Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Chapter 4: Advanced Functions

Adjusting the Aspect Ratio (EZ View). . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Selecting the Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Selecting the Subtitle Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Changing the Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Using the Instant Replay/Skip Function . . . . . . . . . . . . . . . . . . . . . . . . . 31

Using the Bookmark Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Using the Zoom Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Clips Menu for MP3/WMA/JPEG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Folder Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

MP3/WMA Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Picture CD Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Chapter 5: Karaoke Functions

Karaoke Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Reserving a Song. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Vocal Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Chapter 6: Changing Setup Menu

Using the Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Setting Up the Language Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Setting Up the Audio Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Setting Up the Display Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Setting Up the Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Chapter 7: Reference

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

ENG-4

ENG-5

Chapter 1

SETUP

Setup

Disc Type and Characteristics

General Features

Excellent Sound

Dolby Digital, a technology developed by Dolby Laboratories, provides crystal clear sound reproduction.

Screen

Both regular and widescreen(16:9) pictures can be viewed.

Slow Motion

An important scene can be viewed in slow motion.

Program Play (CD)

You can program tracks to play in desired order.

Parental Control (DVD)

The parental control allows users to set the level necessary to prohibit children from viewing harmful movies such as those with violence, adult subject matter, etc.

Various On-Screen Menu Functions

You can select various languages (Audio/Subtitle) and screen angles while enjoying movies.

Progressive Scan

Progressive scanning creates an improved picture with double the scan lines of a conventional interlaced picture.

EZ VIEW (DVD)

Easy View enables picture adjustment to match your TV's screen size (16:9 or 4:3).

Digital Photo Viewer (JPEG)

You can view Digital Photos on your TV.

Repeat

You can repeat a song or movie simply by pressing the REPEAT button.

MP3/WMA

This unit can play discs created from MP3/WMA files.

Instant Replay (DVD)

This function is used to replay the previous 10 seconds of a movie from the current position.

Instant Skip (DVD)

This function skips playback ahead 10 seconds.

Note

- Discs which cannot be played with this player.

• DVD-ROM • DVD-RAM

• CD-ROM • CDV

• CDI • CVD

• Super Audio CD (except CD layer)

• CDGs play audio only, not graphics.

- Ability to play back may depend on recording conditions.

• DVD-R, +R

• CD-RW

• DVD+RW, -RW (V mode)

- The unit may not play certain CD-R, CD-RW and DVD-R due to the disc type or recording conditions.

COPY PROTECTION

Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs.

This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

PROGRESSIVE SCAN OUTPUTS (525p/625p)

“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE, IF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS OCCUR, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING YOUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD PLAYER, PLEASE CONTACT SAMSUNG'S CUSTOMER SERVICE CENTER.”

This DVD player is capable of playing the following types of discs with the corresponding logos:

Disc Types (Logos)

DVD

VIDEO-CD

AUDIO-CD

Disc Markings Region Number

Play Region Number

PAL

STEREO

DIGITAL

SOUND

PAL broadcast system in UK, France, Germany, etc.

Dolby Digital disc

Stereo disc

Digital Audio disc

DTS disc

MP3 disc

Recording Types Disc Size Max. Playing Time Characteristics

- DVD contains excellent sound and video due to Dolby Digital and MPEG-2 system.

- Various screen and audio functions can be easily selected through the on-screen menu.

- Video with CD sound, VHS quality & MPEG-1 compression technology.

- CD is recorded as a Digital Signal with better audio quality, less distortion and less deterioration of audio quality over time.

Audio

Video

Audio

Video

Audio

12 Cm

8 Cm

12 Cm

8 Cm

12 Cm

8 Cm

Single-sided 240 min.

Double-sided 480 min.

Single-sided 80 min.

Double-sided 160 min.

74 min.

20 min.

74 min.

20 min.

Both the DVD player and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play.

The Region Number for this player is described on the rear panel of the player.

You must only insert one DVD disc at a time. Inserting two or more discs will not allow playback and may cause damage to the DVD player.

ENG-6

ENG-7

EZ VIEW

STANDBY/ON

MIN

MIC

VOLUME

MAX

SETUP

Setup

Description

Front Panel Controls

23456

879

1. STANDBY/ON ( )

When STANDBY/ON is pressed on, the indicator goes out and the player is turned on.

2. STANDBY indicator

When the unit is first plugged in, this indicator lights.

3. STOP ( )

Stops disc play.

4. PLAY/PAUSE ( )

Begin or pause disc play.

5. EZ VIEW

The aspect ratio of a picture can easily be adjusted to your TV's screen size (16:9 or 4:3).

6. OPEN/CLOSE ( )

Press to open and close the disc tray.

7. MIC

Connect Microphone for karaoke functions.

8. MICROPHONE VOLUME

Use to adjust microphone volume level. Use the button by pressing it. Turn it to the left or right to control the volume.

9. SKIP ( / ) SEARCH

Allow you to search forward/backward through a disc. Use to skip the title, chapter or track.

10. DISPLAY

Operation indicators are displayed here.

11. DISC TRAY

Place the disc here.

Rear Panel

13 45

1. DIGITAL AUDIO OUT JACKS

- Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.

- Use either an optical or coaxial digital cable to connect to an A/V Amplifier that contains a Dolby Digital, MPEG2 or DTS decoder.

2. COMPONENT VIDEO OUT JACKS

- Use these jacks if you have a TV with Component Video in jacks. These jacks provide PR, PBand Y video.

- If Component(P-SCAN) Video Output is selected in Setup Menu, progressive scan mode will work.

- If Component(I-SCAN) Video Output is selected in Setup Menu, interlaced scan mode will work.

3. AUDIO OUT JACKS

Connect to the Audio input jacks of your television or audio/video receiver.

4. VIDEO OUT JACK

- Use a video cable to connect to the Video input jack on your television.

- The Video Output in Setup Menu must be set to S-Video.

5. S-VIDEO OUT JACK

- Use the S-Video cable to connect this jack to the S-Video jack on your television for higher picture quality.

- The Video Output in Setup Menu must be set to S-Video.

Front Panel Display

1. Chapter/Track number indicator

2. Total playing time/Displays various messages concerning operations such as PLAY, STOP, LOAD ...

no DISC: No disc loaded. OPEN: The disc tray is open. LOAD: Player is loading disc information.

ENG-8

Note

Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN). If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.

- If Component (P-SCAN) Video Output is selected in Setup Menu, Video and S-Video Outputs do not work.

- See pages 50 ~ 51 to get more information on how to use the setup menu.

ENG-9

SETUP

Tour of the Remote Control

Chapter 2

CONNECTIONS

5 6

7 8

12 13

15 16

19 20

21 22

1. DVD POWER Button

Turns the power on or off.

2. NUMBER Buttons

3. PROG Button

Allows you to program a specific order.

4. STEP Button

Advances play one frame at a time.

5. SEARCH/SKIP Buttons (

Allow you to search forward/backward through a disc. Use to skip the title, chapter or track.

6. STOP Button ( )

7. MENU Button

Brings up the DVD player’s menu.

8. RETURN Button

Returns to a previous menu.

9. KARAOKE Button

Use to begin Karaoke functions.

10. SUBTITLE Button

11. OPEN/CLOSE ( ) Button

To open and close the disc tray.

12. CLEAR Button

Use to remove menus or status displays from the screen.

13. INSTANT REPLAY Button

This function is used to replay the previous 10 seconds of a movie from the current position.

14. INSTANT SKIP Button

This function skips playback ahead 10 seconds.

15. PLAY/PAUSE Button ( )

Begin/Pause disc play.

16. INFO Button

Displays the current disc mode.

17. DISC MENU Button

Brings up the Disc menu.

18. ENTER/

This button functions as a toggle switch.

19. EZ VIEW Button

The aspect ratio of a picture can easily be adjusted according to the screen size of your TV (16:9 or 4:3).

20. REPEAT Button

Allows you to repeat play a title, chapter, track, or disc.

21. ANGLE Button

Use to access various camera angles on a DVD.

22. AUDIO Button

Use this button to access various audio functions on a disc.

""❷❷➛➛❿❿

Buttons

Choosing a Connection

Connections

The following shows examples of connections commonly used to connect the DVD player with a TV and other components.

Before Connecting the DVD Player

- Always turn off the DVD player, TV, and other components before you connect or disconnect any

)

cables.

- Refer to the user’s manual of the additional components (such as a TV) you are connecting for more information on those particular components.

Connection to a TV (Video)

Using video/audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT terminals on the rear of the DVD player to the SCART IN terminals of your TV.

Turn on the DVD player and TV.

Press the input selector on your TV remote control until the Video signal from the DVD player appears on the TV screen.

Note

- Noise may be generated if the audio cable placed too close to the power cable.

- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 15 to 16)

- The number and position of terminals may vary depending on your TV set. Please refer to the user's manual of your TV.

- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the DVD player.

ENG-10

ENG-11

CONNECTIONS

Connection to a TV (S-Video)

- Connecting to your TV using an S-Video cable.

- You will enjoy high quality images. S-Video separates the picture element into black and white(Y) and color(C) signals to present clearer images than regular video input mode. (Audio signals are delivered through the audio output.)

Using an S-Video cable (not included), connect the S-VIDEO OUT terminal on the rear of the DVD player to the S-VIDEO IN terminal of your TV.

Using the audio cables (not included), connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of your TV.

Turn on the DVD player and TV.

Press the input selector on your TV remote control until the S-Video signal from the DVD player appears on your TV screen.

(Not included)

Connection to a TV (Interlace)

- Connecting to your TV using Component video cables.

- You will enjoy high quality and accurate color reproduction images. Component video separates the picture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals are delivered through the audio output.)

Using component video cables (not included), connect the COMPONENT VIDEO OUT terminals on the rear of the DVD player to the COMPONENT IN terminals of your TV.

Using the audio cables (not included), connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of your TV.

Turn on the DVD player and TV.

Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV screen.

(Not included)

Connections

Set the Video Output to S-Video in the Display Setup menu. (See pages 50 to 51)

Note

- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 15 to 16)

- The number and position of terminals may vary depending on the TV set. Please refer to the user's manual of your TV.

ENG-12

Set the Video Output to Component (I-SCAN) in the Display Setup menu. (See pages 50 to 51)

Note

- If Video output is incorrectly set to S-Video with the Component cables connected, the screen will turn red.

- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 15 to 16)

- The component terminal of your TV may be marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “P depending on the manufacturer. The number and position of terminals may vary depending on the TV set. Please refer to the user's manual of your TV.

ENG-13

, PB, Y”

CONNECTIONS

Connection to a TV (Progressive)

Using component video cables (not included), connect the COMPONENT VIDEO OUT terminals on the rear of the DVD player to the COMPONENT IN terminals of your TV.

Using the audio cables (not included), connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of your TV.

Turn on the DVD player and TV.

Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV screen.

Set the Video Output to Component (P-SCAN) in the Display Setup menu. (See pages 50 to 51)

(Not included)

Connection to an Audio System (2 Channel Amplifier)

Using the audio cables (not included), connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of the Amplifier.

Using the video signal cable(s), connect the VIDEO, S-VIDEO or COMPONENT OUT terminals on the rear of the DVD player to

the VIDEO, S-VIDEO or COMPONENT IN terminal of your TV as described on pages 11 to 14.

Turn on the DVD player, TV, and Amplifier.

Press the input select button of the Amplifier to select external input in order to hear sound from the DVD player.

Refer to your Amplifier's user manual to set the Amplifier's audio input.

Connections

(Not included)

To see the progressive video output,

- Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive

You need a TV set supporting the progressive scan input

Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s

function. And you have to set up the TV menu to the

menu system.

progressive scan input.

- Depending on your TV, the connection method may differ from the illustration above.

Note

- What is "Progressive Scan"? Progressive scan has twice as many scanning lines as the interlace output method. Progressive scanning method provides better and clearer picture quality.

ENG-14

Note

- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears.

- Please set the audio in the menu screen according to the Amplifier. (See pages 48 to 49)

- The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of the Amplifier.

ENG-15

CONNECTIONS

Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)

Chapter 3

BASIC FUNCTIONS

If using an optical cable (not included), connect the DIGITAL AUDIO OUT (OPTICAL) terminal on the rear of the DVD player

to the DIGITAL AUDIO IN (OPTICAL) terminal of the Amplifier. If using a coaxial cable (not included), connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.

Using the video signal cable(s), connect the VIDEO, S-VIDEO or COMPONENT OUT terminals on the rear of the DVD player to the VIDEO, S-VIDEO or COMPONENT IN terminal of your TV as described on pages 11 to 14.

Turn on the DVD player, TV, and Amplifier.

Press the input select button of the Amplifier to select external input in order to hear sound from the DVD player.

Refer to your Amplifier's user manual to set the Amplifier's audio input.

Playing a Disc

Before Play

- Turn on your TV and set it to the correct Video Input on the TV's remote control.

- If you connected an external Audio System, turn on your Audio System and set it to the correct

Audio Input.

After plugging in the player, the first time you press the DVD POWER button, this screen comes up: If you want to select a language, press a NUMBER button. (This screen will only appear when you plug in the player for the first time.) If the language for the startup screen is not set, the settings may change whenever you turn the power on or off. Therefore, make sure that you select the language you want to use. Once you select a menu language, you can change it by pressing the button on the front panel of the unit for more than 5 seconds with no disc in the unit. Then the SELECT

MENU LANGUAGE window appears again where you can reset your preferred language.

Playback

MacroVision V802

Press the OPEN/CLOSE ()button.

The STANDBY indicator light goes out and the tray opens.

Functions

Basic

Note

- When you connect the DVD player to DTS Amplifier and play a DTS disc, set the DTS to On in Audio Setup menu. If it is set to Off, sound will not be heard, or there will be a loud sound.

- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears.

- Please set the audio in the menu screen according to the Amplifier. (See pages 48 to 49)

- The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of the Amplifier.

- Please remove the dust cover before using the optical cable (not included) and put the cover on the cable again when it's not used.

ENG-16

Place a disc gently into the tray with the disc’s label facing up.

Press the PLAY/PAUSE ( ) button or OPEN/CLOSE ( ) button to close the disc tray.

ENG-17

▼

RESUME function

When you stop disc play, the player remembers where you stopped, so when you press PLAY/PAUSE ( ) button again, it will pick up where you left off. (unless the disc is removed or the player is unplugged, or if you press the STOP ( ) button twice.)

BASIC FUNCTIONS

Stopping Play

Press the STOP ( ) button during play.

Removing Disc Press the OPEN/CLOSE ()button.

Pausing Play Press the PLAY/PAUSE ()or STEP button on the

remote control during play.

Step Motion Play (Except CD)

Press the STEP button on the remote control during play.

Slow Motion Play (Except CD)

Press and hold the SEARCH ( ) button to choose the play speed between 1/8, 1/4 and 1/2 of normal during PAUSE or STEP mode.

Note

- If the player is left in the stop mode for more than one minute without any user interaction, a screen saver will be activated. Press the PLAY/PAUSE ( ) button to resume normal play.

- If the player is left in the stop mode for more than 30 minutes, the power will automatically turn off except when the MIC is connected. (Automatic Power-Off Function)

▼

Screen stops, no sound. To resume, press the PLAY/PAUSE ( ) button

once again.

Note

If the player is left for about 5 minutes in pause mode, it will stop.

▼

Each time the button is pressed, a new frame

will appear. No sound is heard during STEP mode. Press the PLAY/PAUSE ( ) button to resume

normal play. You can only perform step motion play in the

forward direction.

▼

No sound is heard during slow mode. Press the PLAY/PAUSE ( ) button to resume

normal play. Reverse slow motion play will not work.

Note

This ( ) icon indicates an invalid button press.

Using the Search and Skip Functions

During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection.

Searching through a Chapter or Track

▼

During play, press the SEARCH ( or ) button on the remote control for more than 1 second.

Skipping Tracks

During play, press the SKIP ( or ) button.

- When playing a DVD, if you press the SKIP ( ) button, it moves to the next chapter. If you press the SKIP ( ) button, it moves to the beginning of the chapter. One more press makes it move to the beginning of the previous chapter.

- When playing a VCD 2.0 in Menu Off mode, or a VCD 1.1 or a CD, if you press the SKIP ( ) button, it moves to the next track. If you press the SKIP ( ) button, it moves to the beginning of the track. One more press makes it move to the beginning of the previous track.

- If a track exceeds 15 minutes when playing a VCD and you press the button, it moves forward 5minutes. If you press the button, it moves backward 5 minutes.

If you want to search at a faster speed on the

DVD, VCD or CD, press and hold the button.

2X, 8X, 32X, 128X

DVD

4X, 8X

VCD

2X, 4X, 8X

Note

- The speed marked in this function may be different from the actual playback speed.

- No sound is hearing during search mode (Except CD).

Note

When VCD 2.0 is in Menu Off mode only, this function works. Select Menu Off by pressing the DISC MENU button.

Functions

Basic

ENG-18

ENG-19

Title

Chapter

Track

Time

Audio

Subtitle

BASIC FUNCTIONS

Using the Display Function

When Playing a DVD/VCD/CD

During play, press the INFO button on the remote control.

Press the "/❷ buttons to select the desired item.

DVD

VCD

DVD

Chapter

Subtitle

VCD

Title

Time

Audio

Track

Time

0:00:13

ENG 5.1CH

Off

0:00:48

▼

You can select Info in the function menu by

pressing the MENU button.

▼

When VCD 2.0 is in Menu Off mode only, this function works. Select Menu Off by pressing the DISC MENU button.

To make the screen disappear, press the INFO button again.

Note

To access the desired title when there is more than one in the disc. For example, if there is more than one movie on a DVD, each movie will be identified.

Most DVD discs are recorded in chapters so that you can quickly find a specific passage (similar to tracks on an audio CD).

Allows playback of the film from a desired time. You must enter the starting time as a reference. The time search function does not operate on some discs.

Refers to the film's soundtrack language. In the example, the soundtrack is played in English

5.1CH. A DVD disc can have up to eight different soundtracks.

Refers to the subtitle languages available in the disc. You will be able to choose the subtitle languages or, if you prefer, turn them off from the screen. A DVD disc can have up to 32 different subtitles.

Functions

Basic

Press the ➛/❿ buttons to make the desired setup and then press the button.

ENTER

Track

0:00:48

Time

▼

You may use the number buttons of the remote

control to directly access a title, chapter or to start the playback from a desired time.

ENG-20

ENG-21

BASIC FUNCTIONS

Using the Disc and Title Menu

Using the Disc Menu (DVD/VCD)

During the playback of a DVD disc, press the MENU button on the remote control.

Press the "/❷ buttons to select Disc Menu, then press the ❿ or ENTER button.

Using the Title Menu (DVD)

During the playback of a DVD disc, press the MENU button on the remote control.

Note

- Depending on a disc, the Disc Menu may not work.

- You can also use the Disc Menu, using the DISC MENU button on the remote control.

- When VCD 2.0 is in Menu Off mode only, this function works. Select Menu Off by pressing the DISC MENU button.

Using the Function Menu

Using the Function Menu (DVD/VCD)

Press the MENU button during playback.

Press the "/❷ buttons to select Function, then press the ❿ or ENTER button.

- Info (See pages 20 to 21)

- Zoom (See page 34)

- Bookmark (See pages 32 to 33)

- Repeat (See pages 24 to 25)

- EZ View (See pages 27 to 28)

Press the "/❷ buttons to select one of the five functions. Then press the ❿ or ENTER button to access the function.

▼

You can also directly select these functions

using their respective buttons on the remote control.

- INFO

- EZ VIEW

- REPEAT

Functions

Basic

Press the "/❷ buttons to select Title Menu, then press the button.

❿ or ENTER

Note

- Depending on a disc, the Title Menu may not work.

- Title Menu will only be displayed if there are at least two titles in the disc.

ENG-22

ENG-23

BASIC FUNCTIONS

Repeat Play

Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.

When playing a DVD/VCD/CD

Press the REPEAT button on the remote control. Repeat screen appears.

▼

Press the ➛/❿ buttons to select Chapter, Title or A-B, then press the ENTER button.

DVD

Off 01 01 A - B

VCD/CD

Off 01 01 A - B

REPEAT

ENTER

Using the A-B Repeat function

1. Press the REPEAT button on the remote control.

2. Press the ➛/❿ buttons to Select A-B.

3. Press the ENTER button at the point where you want repeat play to start (A). B is automatically highlighted.

4. Press the ENTER button at the point where you want the repeat play to stop (B).

- To return to normal play, press the CLEAR button.

Note

A-B REPEAT does not allow you to set point (B) until at least 5 seconds of playback time has elapsed after point (A) has been set.

To return to normal play, press REPEAT button again, then press the ➛/❿ buttons to select Off and press ENTER button.

DVD

Off 01 01 A - B

VCD/CD

Off 01 01 A - B

REPEAT

ENTER

ENG-24

DVD repeats play by chapter or title, CD and

VCD repeat play by disc or track.

Chapter ( ): repeats the chapter that is

playing. Title ( ): repeats the title that is playing. Disc ( ): repeats the disc that is playing. Track ( ): repeats the track that is playing. A-B: repeats a segment of the disc that you

select.

Note

- Depending on a disc, the Repeat function may not work.

- When VCD 2.0 is in Menu Off mode only, this function works. Select Menu Off by pressing the DISC MENU button.

Slow Repeat Play

This feature allows you slowly to repeat scenes containing sports, dancing, musical instruments being played etc., so you can study them more closely.

When playing a DVD/VCD

During play, press the PLAY/PAUSE ( ) button.

Press and hold the SEARCH ( ) button to choose the play speed between 1/8, 1/4 and 1/2 of normal during PAUSE or STEP mode.

▼

Press the REPEAT button on the remote control. Press the ➛/❿ buttons to select A-B.

Press the ENTER button at the point where you want repeat play to start (A). B is automatically highlighted. Press the ENTER button at the point where you want the repeat play to stop (B).

The disc will play from A to B repeatedly at the speed you chose.

▼

To set A-B REPEAT, set (A) first, then set (B) after the following slow play time has elapsed: 1/8x: wait 40 seconds, then press B

1/4x: wait 20 seconds, then press B 1/2x: wait 10 seconds, then press B

To return to normal play, press the CLEAR button and then press the

PLAY/PAUSE ( ) button.

Note

When VCD 2.0 is in Menu Off mode only, this function works. Select Menu Off by pressing the DISC MENU button.

ENG-25

Functions

Basic

BASIC FUNCTIONS

Program Play & Random Play

Chapter 4

ADVANCED FUNCTIONS

Program Play (CD)

Program Play allows you to select the order in which you want tracks to play.

During play, press the PROG button.

Press the ➛/❿ buttons to select PROGRAM. Press the ENTER button.

Press the "/❷/➛/❿ buttons to select the first track to add to the program. Press the ENTER button. The selection numbers appear in the Program Order box.

PROGRAM

Trac k

01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16

RANDOM

Program Order

- - - - - -

- - - - - - - -

PROGRAM 01

▼

- To return to the previous menu screen, press the RETURN button.

- To cancel the selected program order, press the CLEAR button.

- This unit can support a maximum of 20 programmed tracks.

Press the PLAY/PAUSE ()button.

The disc will be played in programmed order.

Random Play (CD)

Random Play plays a disc's tracks in random order.

Press the PROG button.

PROGRAM

RANDOM

Adjusting the Aspect Ratio (EZ View)

To play back using aspect ratio (DVD)

Press the EZ VIEW button.

- The screen size changes when the button is pressed repeatedly.

- The screen zoom mode operates differently depending on the screen setting in the Display Setup menu.

- To ensure correct operation of the EZ VIEW button, you should set the correct aspect ratio in the Display Setup menu. (See pages 50 to 51).

WIDE SCREEN

EZ VIEW

If you are using a 16:9 TV

For 16:9 aspect ratio discs

- WIDE SCREEN Displays the content of the DVD title in 16:9 aspect ratio.

- SCREEN FIT

The top and bottom portions of the screen are cut off. When playing a 2.35:1 aspect ratio disc, the black bars at the top and bottom of the screen will disappear. The picture will look vertically stretched. (Depending on a type of disc, the black bars may not disappear completely.)

- ZOOM FIT

The top, bottom, left and right of the screen are cut off and the central portion of the screen is enlarged.

▼

To make the aspect ratio bar disappear, press the CLEAR button.

For 4:3 aspect ratio discs

- Normal Wide

Displays the content of the DVD title in 16:9 aspect ratio. The picture will look horizontally stretched.

- SCREEN FIT

The top and bottom portions of the screen are cut off and the full screen appears. The picture will look vertically stretched.

- ZOOM FIT

The top, bottom, left and right portions of the screen are cut off and the central portion of the screen is enlarged.

- Vertical Fit

When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at the left and right of the screen in order to prevent the picture from looking horizontally stretched.

Advanced

Functions

Press the select RANDOM. Press the ENTER button.

➛/❿

buttons to

Note

- Depending on a disc, the Program and Random Play functions may not work.

- While in playback mode, press the CLEAR button on the remote control to cancel Program Play or Random Play.

ENG-26

ENG-27

ADVANCED

FUNCTIONS

ADVANCED FUNCTIONS

If you are using a 4:3 TV

For 16:9 aspect ratio discs

- 4:3 Letter Box

Displays the content of the DVD title in 16:9 aspect ratio. The black bars will appear at the top and bottom of the screen.

- 4:3 Pan Scan

The left and right portions of the screen are cut off and the central portion of the 16:9 screen is displayed.

- SCREEN FIT

The top and bottom portions of the screen are cut off and a full screen appears. The picture will look vertically stretched.

- ZOOM FIT

The top, bottom, left and right of the screen are cut off and the central portion of the screen is enlarged.

For 4:3 aspect ratio discs

- Normal Screen

Displays the content of the DVD title in 4:3 aspect ratio.

- SCREEN FIT

The top and bottom portions of the screen are cut off and the full screen appears. The picture will look vertically stretched.

- ZOOM FIT

The top, bottom, left and right portions of the screen are cut off and the central portion of the screen is enlarged.

Note

This function may behave differently depending on the type of disc.

Selecting the Audio Language

You can select a desired audio language quickly and easily with the AUDIO button.

Using the AUDIO button (DVD/VCD/CD)

Press the AUDIO button. The Audio changes when the button is pressed repeatedly.

- The audio languages are represented by abbreviations.

When playing a VCD or CD, you can select among Stereo, Right or Left.

DVD

ENG

VCD/CD

DOLBY DIGITAL 5.1CH

AUDIO

Stereo

AUDIO

Advanced

Functions

ENG-28

To remove the AUDIO icon, press the CLEAR or

RETURN button.

Note

- This function depends on audio languages are encoded on the disc and may not work.

- A DVD disc can contain up to 8 audio languages.

- To have the same audio language come up whenever you play a DVD; Refer to “Using the Audio Language” on page 46.

ENG-29

ADVANCED

FUNCTIONS

ADVANCED

FUNCTIONS

Selecting the Subtitle Language

You can select a desired subtitle quickly and easily with the SUBTITLE button.

Using the SUBTITLE button (DVD)

Press the SUBTITLE button. The subtitle changes when the button is pressed repeatedly. The subtitle languages are represented by abbreviations.

To remove the SUBTITLE icon, press the CLEAR or RETURN button.

DVD

SUBTITLE

Off

Note

- Depending on DVDs, you have to change the desired subtitle in the Disc Menu. Press the DISC MENU button.

- This function depends on what subtitles are encoded on the disc and may not work on all DVDs.

- A DVD disc can contain up to 32 subtitle languages.

- To have the same subtitle language come up whenever you play a DVD; Refer to “Using the Subtitle Language” on page 47.

Changing the Camera Angle

When a DVD contains multiple angles of a particular scene, you can use the ANGLE function.

Using the ANGLE button (DVD)

If the disc contains multiple angles, the ANGLE appears on the screen.

Press the ANGLE button, then the ANGLE icon will appear with the current angle number and the number of angles available.

ANGLE

Press the ANGLE button repeatedly to select the desired angle. To remove the ANGLE icon, press the CLEAR or RETURN button.

Using the Instant Replay/Skip Function

Using the Instant Replay function (DVD)

If you miss a scene, you can see it again using this function.

4/6

Note

If the disc has only one angle, this feature won’t work. Currently, very few discs have this feature.

Advanced

Functions

ENG-30

Press the INSTANT REPLAY button.

- The current scene moves backward about 10 seconds, and plays back.

Using the Instant Skip function (DVD)

Use this function to skip playback about 10 seconds ahead of the current scene.

Press the INSTANT SKIP button.

- Playback will skip ahead 10 seconds.

Note

Depending on the disc, these functions may not work.

ENG-31

ADVANCED

FUNCTIONS

ADVANCED

FUNCTIONS

Using the Bookmark Function

This feature lets you bookmark sections of a DVD or VCD (Menu Off mode) so you can quickly find them at a later time.

Using the Bookmark Function (DVD/VCD)

During play, press the MENU button on the remote control.

Press the $/❷buttons to select Function, then press the ❿or ENTER button.

Press the $/❷buttons to select Bookmark, then press the ❿or ENTER button.

Recalling a Marked Scene

1~3

The first 1~3 steps are the same as those for “Using the Bookmark Function” on page 32.

Press the ➛/❿ buttons to select a marked scene.

Press the PLAY/PAUSE ( ) button to skip to the marked scene.

Clearing a Bookmark

1 2 3

Advanced

Functions

When you reach the scene you want to mark, press the ENTER button. Up to three scenes may be marked at a time.

1 - -

ENG-32

1~3

The first 1~3 steps are the same as those for “Using the Bookmark Function” on page 32.

Press the ➛/❿ buttons to select the bookmark number you want to delete.

Press the CLEAR button to delete a bookmark number.

1 2 3

ENG-33

ADVANCED

FUNCTIONS

ADVANCED

FUNCTIONS

Using the Zoom Function

Using the Zoom Function (DVD/VCD)

During play or pause mode, press the MENU button on the remote control.

Press the $/❷ buttons to select Function, then press the ❿ or ENTER button.

Press the $/❷ buttons to select Zoom, then press the ❿ or ENTER button.

Press the $/❷ or ➛/❿ buttons to select the part of the screen you want to zoom in on. Press the ENTER button.

▼

- During DVD play, press ENTER to zoom in 2X/4X/2X/Normal in order.

- During VCD play, press ENTER to zoom in 2X/Normal in order.

Note

When VCD 2.0 is in Menu Off mode only, this function works. Select Menu Off by pressing the DISC MENU button.

Clips Menu for MP3/WMA/JPEG

Discs with MP3/WMA/JPEG contain individual songs and/or pictures that can be organized into folders as shown below. They are similar to how you use your computer to put files into different folders.

Open the disc tray. Place the disc on the tray. Close the tray. The tray closes and this screen displays.

Parent Folder, Current Folder

- : Name of currently playing file.

- : Current Playback Time.

- : Current Playback Mode : There are four modes. They can be selected in order by pressing the REPEAT button.

- Off: Normal Playback

- Track: Repeats the current track.

- Folder: Repeats the current folder.

- Random: Files in the disc will be played in

random order.

ROOT

and Peer Folders

Off

ROOT

WMA

JPEG

MP3

Folders and Files in

Current Folder

- : MP3 file icon.

- : WMA file icon.

- : JPEG file icon.

- : Folder icon.

- : Current Folder icon.

Folder Selection

The folder can only be selected in the Stop mode.

- To select the Parent Folder

Press the RETURN button to go to the parent folder, or press the $/❷ buttons to select “..” and press ENTER to go to the parent folder.

- To select the Peer Folder

Press the ➛/❿ buttons to highlight the left window. Press the $/❷ buttons to select the desired folder, then press ENTER.

- To select the Sub-Folder

Press the ➛/❿ buttons to highlight the right window. Press the $/❷ buttons to select the desired folder, then press ENTER.

Root

WMA

JPEG

MP3

SONG FILE 3

Parent Folder

MUSIC

1st

2nd

SONG FILE 1

SONG FILE 2

Current Folder

Sub-Folders

Peer Folders

Advanced

Functions

ENG-34

MPEG4 FILES

ENG-35

ADVANCED

FUNCTIONS

ADVANCED

FUNCTIONS

MP3/WMA Playback

Open the disc tray. Place the disc on the tray. Close the tray.

00:00:23 1_mp3

ROOT

Press the $/❷ or ➛/❿ buttons to select a song file. Press ENTER to begin playback of the song file.

00:00:23 1_mp3

00:00:23 Because You

ROOT

MP3

WMA

Repeat/Random playback

Off

ROOT

MP3

WMA

Because You

Cactus

Sad Day

Wonderful

Off

Because You

Cactus

Because You

Sad Dayu

Cactus

Wonderful

Sad Day

Wonderful

▼

Only one kind of file is played back when a disc or a folder contains both MP3 and WMA files.

CD-R MP3/WMA file

When you record MP3 or WMA files on CD-R, please refer to the following.

- Your MP3 or WMA files should be ISO 9660 or JOLIET format.

ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and Windows, and with Apple's Mac. This format is the most widely used.

- When naming your MP3 or WMA files, do not exceed 8 characters, and enter “.mp3, .wma” as the file extension.

General name format : Title.mp3. or Title.wma. When composing your title, make sure that you use 8 characters or less, have no spaces in the name, and avoid the use of special characters including: (.,/,\,=,+).

- Use a decompression transfer rate of at least 128 Kbps when recording MP3 files.

Sound quality with MP3 files basically depends on the rate of compression/decompression you choose. Getting CD audio sound requires an analog/digital sampling rate, that is conversion to MP3 format, of at least 128 Kbps and up to 160 Kbps. However, choosing higher rates, like 192 Kbps or more, only rarely give better sound quality. Conversely, files with decompression rates below 128 Kbps will not be played properly.

- Use a decompression transfer rate of at least 64Kbps when recording WMA files.

Sound quality with WMA files basically depends on the rate of compression/decompression you choose. Getting CD audio sound requires an analog/digital sampling rate, that is conversion to WMA format, of at least 64Kbps and up to 192Kbps. Conversely, files with decompression rates below 64Kbps or over 192Kbps will not be played properly.

- Do not try recording copyright protected MP3 files.

Certain "secured" files are encrypted and code protected to prevent illegal copying. These files are of the following types: Windows MediaTM(registered trade mark of Microsoft Inc) and SDMITM(registered trade mark of The SDMI Foundation). You cannot copy such files.

- Important:

The above recommendations cannot be taken as a guarantee that the DVD player will play MP3 recordings, or as an assurance of sound quality. You should note that certain technologies and methods for MP3 file recording on CD-Rs prevent optimal playback of these files on your DVD player (degraded sound quality and in some cases, inability of the player to read the files).

- This unit can play a maximum of 3000 files and 300 folders per disc.

Advanced

Functions

Press the REPEAT button to change the playback mode. There are four modes; Off, Track, Folder and Random.

- Off: Normal Playback

- Track: Repeats the current song file.

- Folder: Repeats the song files which have the same extension in the current folder.

- Random: Song files which have the same extension will be played in random order.

To resume normal play, press the CLEAR button.

ENG-36

ENG-37

ADVANCED

ENTER

TIMER:

RETURN

FUNCTIONS

ADVANCED

FUNCTIONS

Picture CD Playback

Select the desired folder.

Press the $/❷ buttons to select a Picture file in the clips menu and then press the ENTER button.

Press the INFO button to display the menu. Press the ➛/❿ buttons to select the menu you want to view, then press the ENTER button.

ROOT

WMA

JPEG

MP3

ROOT

WMA

JPEG

MP3

Off

ENTER RETURN

Note

- If no buttons on the remote control are pressed for 10 seconds, the menu will disappear.

- Press the STOP button to return to the clips menu.

- When playing a Kodak Picture CD, the unit displays the Photo directly, not the clips menu.

CD-R JPEG Discs

- Only files with the “.jpg” and “.JPG” extensions can be played.

- If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.

- Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.

- The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces or special characters (. / = +).

- Only a consecutively written multi-session disc can be played. If there is a blank segment in the multi-session disc, the disc can be played only up to the blank segment.

- A maximum of 3000 images can be stored on a single CD.

- Kodak Picture CDs are recommended.

- When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.

- Kodak Picture CD: The JPEG files in the pictures folder can be played automatically.

- Konica Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.

- Fuji Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.

- QSS Picture CD: The unit may not play QSS Picture CD.

- If the number of files in 1 Disc is over 3000, only 3000 JPEG files can be played.

- If the number of folders in 1 Disc is over 300, only JPEG files in 300 folders can be played

Advanced

Functions

Album Screen

Slide Show

• : Returns to the Album Screen.

• To see the next six pictures, press the button.

• To see the previous six pictures, press the button.

Rotation

: Each time the ENTER button is pressed, the

picture rotates 90 degrees clockwise.

Zoom

: Press the $/❷ or ➛/❿ buttons to select the part of the

screen you want to zoom in on. Press the ENTER button. Each time the ENTER button is pressed, the picture is enlarged up to 4X. (2X ➝ 4X ➝ 2X ➝ Normal)

• : The unit enters slide show mode.

• Before beginning the Slide Show, the picture interval must be

set. Press the ➛/❿ buttons to select a desired icon, then press the ENTER button.

• : The pictures change automatically with about a 6 second interval.

• : The pictures change automatically with about a 12 second interval.

• : The pictures change automatically with about a 18 second interval.

Note

- Depending on a file size, the amount of time between each picture may be different from the set interval time.

- If you don’t press any button, the slide show will start automatically in about 10 seconds by default.

ENG-38

ENG-39

EZ VIEW

STANDBY/ON

MIN

MIC

VOLUME

MAX

Chapter 5

KARAOKE FUNCTIONS

Karaoke Functions

Operation Sequence

KARAOKE

FUNCTIONS

Reserving a Song

It is the function to reserve the desired song in advance by use of Karaoke function.

Sequence of reservation

Connect the Mixed Audio Out terminals with the TV or Amplifier. (see page 11 to 15)

Connect Mic into Mic jack. When a MIC is connected, the karaoke functions can be used.

Pressing number buttons while playing back with the DISC MENU is set to Off will make the player to skip to the directed track.

Key Control

Playback the Karaoke Disc containing the wanted songs. Press the KARAOKE button.

Press the ➛/❿ buttons to select Request, then press the ENTER button.

▼

Input the number (Track or Chapter No.) of the desired song into the flickering part (--). You can reserve up to 10 songs.

Cancellation of reservation

When you want the next reserved song during playing a song, press the SKIP ( ) button.

When using SKIP ( ) button, it can not work at the last song.

Functions

Karaoke

Press the KARAOKE button.

Press the ➛/❿ buttons to select Keycon, then press the ENTER button.

Note

- If you hear feedback(squealing or howling) while using the karaoke feature, move the microphone away from the speakers or turn down the microphone volume or the speaker volume.

Press the ➛/❿ buttons to change the desired tone.

- To let 7 scales down by half scale.

- Original scale.

- To let 7 scales up by half scale.

ENG-40

- When playing MP3, WMA, DTS and LPCM disc, the karaoke functions will not operate.

- When the MIC is connected, Digital Out does not work.

- If the MIC is connected in VCD 2.0, Playback is selected to Menu off mode automatically.

- The MIC sound outputs only from Analog Audio Out.

Press the ➛/❿ buttons to select Request, then press the ENTER button.

Press the CLEAR button to cancel the reserved song. The last reserved song will be erased first.

Note

- If the reservation is required again, input the song number in the flickering part.

- When using Request function, the “INFO” and “REPEAT” function does not work.

- Pressing the CLEAR button when the cursor is located on the number of the last song reserved will cancel all reservations.

ENG-41

KARAOKE

Vocal Function

FUNCTIONS

Chapter 6

CHANGING SETUP MENU

When pressing the KARAOKE button twice, this screen displays.

When pressing the

➛

button, this screen

displays.

Vocal Fader

- In VCD, SVCD or CD, you can

- CD, VCD Karaoke Disc

select only the R, L or Off.

VOCAL FADER Remark

↓ V1 CH1. Vocal Cancel ↓ V2 CH2. Vocal Cancel ↓ V1 + V2 CH1, CH2. Vocal Cancel ↓ OFF Vocal Fader Off

Guide Melody

VOCAL FADER Remark

↓ R Right stereo music ↓ L Left stereo music ↓ OFF Vocal Fader Off

- The guide melody through xylophone and piano helps you sing easily.

Using the Setup Menu

The Setup menu lets you customize your DVD player by allowing you to select various language preferences, set up a parental level, even adjust the player to the type of television screen you have.

With the unit in Stop mode, press the MENU button on the remote control. Press the $/❷ buttons to select Setup, then press the ❿ or ENTER button.

❶

Language Setup: Setup of the Language.

❷

Audio Setup : Setup of the Audio Options.

❸

Display Setup : Setup of the Display Options. Use to select which type of screen you want to

Setup

watch and several display options.

❹

Parental Setup : Setup of the Parental Level. Allows users to set the level necessary to prevent

children from viewing unsuitable movies such as those with violence, adult subject matter, etc.

Press the $/❷ buttons to access the different features. Press the ❿ or ENTER button to access the sub features.

Types of Karaoke disc

- DVD Karaoke Disc - CVD, VCD, CD Karaoke Disc

Karaoke

Channel

-Channel 1 CH L Left stereo music Left stereo music + Vocal 2 CH R Right stereo music Right stereo music + Vocal 3 CH M Guide melody 4 CH V1 Vocal track 5 CH V2 Vocal track -

5CH. DVD 2CH. DVD

Note

- This function works only on the DVD Karaoke disc on which the vocal fader or guide melody is recorded.

ENG-42

Karaoke

Channel

-Channel 1 CH CH1 LEFT Left stereo music + Vocal Left stereo music 1 CH CH1 RIGHT Right stereo music + Vocal Right stereo music

2 CH CH2 LEFT Left stereo music 2 CH CH2 RIGHT Right stereo music -

CVD VCD, CD

+ Vocal

To make the setup screen disappear after setting up, press the MENU button again.

ENG-43

Note

Depending on the disc, some Setup Menu selections may not work.

Setup Menu

Changing

CHANGING

SETUP MENU

CHANGING

SETUP MENU

Setting Up the Language Features

If you set the player menu, disc menu, audio and subtitle language in advance, they will come up automatically every time you watch a movie.

Using the Player Menu Language

With the unit in Stop mode, press the MENU button.

Press the $/❷ buttons to select Setup, then press the ❿or ENTER button.

Setup

Press the $/❷ buttons to select Language Setup, then press the ❿or ENTER button.

Press the $/❷ buttons to select Player Menu, then press the button.

❿

or ENTER

Press the $/❷ buttons to select the desired language, then press the

❿

or ENTER button.

Setup

LANGUAGE SETUP

PPllaayyeerr MMeennuu :: EEnn ggllii sshh ❿❿

Disc Menu : English Audio : English Subtitle : Automatic

Player Menu EEnngglliisshh

PLAYER MENU LANGUAGE

Français

Deutsch Español Italiano

Nederlands

❿❿ ❿❿ ❿❿

▼

- The language is selected and the screen returns to Language Setup menu.

- To make the setup menu disappear, press the MENU button.

Using the Disc Menu Language

This function changes the text language only on the disc menu screens.

With the unit in Stop mode, press the MENU button.

Press the $/❷ buttons to select Setup, then press the ❿or ENTER button.

Setup

Press the $/❷ buttons to select Language Setup, then press the ❿or ENTER button.

Press the $/❷ buttons to select Disc Menu, then press the ❿or ENTER button.

Press the $/❷ buttons to select the desired language, then press the

❿

or ENTER button.

Setup

LANGUAGE SETUP

Player Menu : English

DDiisscc MMeennuu :: EEnngg ll iisshh ❿❿

Audio : English Subtitle : Automatic

DISC MENU LANGUAGE

Disc Menu Français

EEnn gg ll ii sshh

Deutsch Español Italiano Nederlands Others

❿❿

❿❿ ❿❿

▼

- Select “Others” if the language you want is not listed.

- If the selected language is not recorded on the disc, the original pre-recorded language is selected.

- The language is selected and the screen returns to Language Setup menu.

- To make the setup menu disappear, press the MENU button.

Setup Menu

Changing

ENG-44

ENG-45

CHANGING

SETUP MENU

CHANGING

SETUP MENU

Using the Audio Language

With the unit in Stop mode, press the MENU button.

Press the $/❷ buttons to select Setup, then press the ❿or ENTER button.

Press the $/❷ buttons to select Language Setup, then press the ❿or

ENTER button.

Setup

Using the Subtitle Language

With the unit in Stop mode, press the MENU button.

Press the $/❷ buttons to select Setup, then press the ❿or ENTER button.

Press the $/❷ buttons to select Language Setup, then press the ❿or

ENTER button.

Setup

Press the $/❷ buttons to select Audio, then press the ❿or ENTER button.

Press the $/❷ buttons to select the desired language, then press the

❿

or ENTER button.

LANGUAGE SETUP

Player Menu : English Disc Menu : English

AAuu ddiioo :: EEnnggllii sshh ❿❿

Subtitle : Automatic

AUDIO LANGUAGE

EEnn gg ll ii sshh

Audio Deutsch

Français

Español Italiano Nederlands Original Others

❿❿ ❿❿

❿❿

▼

- Select “Original” if you want the default soundtrack language to be the original language the disc is recorded in.

- Select “Others” if the language you want is not listed.

- If the selected language is not recorded on

Press the $/❷ buttons to select Subtitle, then press the ❿or ENTER button.

Press the $/❷ buttons to select the desired language, then press the

❿

or ENTER button.

Player Menu : English Disc Menu : English Audio : English

SSuu bbttiittllee :: AAuu ttoommaattiicc ❿❿

Subtitle Deutsch

the disc, the original pre-recorded language is selected.

- The language is selected and the screen returns to Language Setup menu.

- To make the setup menu disappear, press the MENU button.

LANGUAGE SETUP

❿❿ ❿❿ ❿❿

SUBTITLE LANGUAGE

AA uu ttoo mmaa ttii cc

English Français

Español Italiano Nederlands Others

▼

- Select “Automatic” if you want the subtitle language to be the same as the language selected as the audio language.

- Select “Others” if the language you want is not listed. Some discs may not contain the language you select as your initial language; in that case the disc will use its original language setting.

- The language is selected and the screen returns to setup menu.

- To make the setup menu disappear, press the MENU button.

Setup Menu

Changing

ENG-46

ENG-47

CHANGING

Setup

Dolby Digital OutDolby Digital Out

SETUP MENU

Setting Up the Audio Options

Audio Options allows you to setup the audio device and sound status settings depending on the audio system in use.

CHANGING

❶

Dolby Digital Out

SETUP MENU

- PCM : Converts to PCM(2CH) audio.

- Bitstream : Outputs Dolby Digital via the digital output. Select Bitstream when connecting to a Dolby Digital Decoder.

With the unit in Stop mode, press the MENU button.

Press the $/❷ buttons to select Setup, then press the ❿or ENTER button.

Press the $/❷ buttons to select Audio Setup, then press the ❿or ENTER button.

Press the $/❷ buttons to select the desired item, then press the ❿or

ENTER button.

Setup

▼

To make the setup menu disappear, press the MENU button.

❷

MPEG-2 Digital Out

- PCM : Converts to PCM(2CH) audio.

- Bitstream : Converts to MPEG-2 Digital Bitstream (5.1CH or 8CH). Select Bitstream when using the Digital Audio Output.

❸

DTS

Select On when connecting to a DTS Decoder.

- Off : Doesn’t output digital signal.

- On : Outputs DTS Bitstream via digital output.

Note

• There is no analog audio output when you play a DTS sound disc.

❹

Dynamic Compression

- On : To select dynamic compression.

- Off : To select the standard range.

❺

PCM Down Sampling

- On : Select this when the Amplifier connected to the player is not 96KHz compatible. In this

case, the 96KHz signals will be down converted to 48KHZ.

- Off : Select this when the Amplifier connected to the player is 96KHz compatible. In this case,

all signals will be output without any changes.

Note

Even when PCM Down sampling is Off

• Some discs will only output down sampled audio through the digital outputs.

ENG-48

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

ENG-49

Setup Menu

Changing

TV ASPECT

4:3 Pan Scan

16:9 Wide

4:3 Letter Box4:3 Letter Box

DISPLAY SETUP

Still Mode : Auto Screen Messages : On

Video Output : S-Video

TV Aspect : 4:3 L-Box

TV SystemTV System : PALAL

Black Level : Off

DISPLAY SETUP

Still Mode : Auto Screen Messages : On

TV Aspect : 4:3 L-Box

TV System : PAL

Black Level : Off

Video Outputideo Output

: S-Videoideo

CHANGING

Setup

DISPLAY SETUP

Still Mode : Auto Screen Messages : On

Video Output : S-Video

TV TV AspectAspect : 4:3 L-Box: 4:3 L-Box

TV System : PAL

Black Level : Off

SETUP MENU

Setting Up the Display Options

Display options enable you to set various video functions of the player.

With the unit in Stop mode, press the MENU button.

Press the $/❷ buttons to select Setup, then press the ❿or ENTER button.

Setup

Press the $/❷ buttons to select Display Setup, then press the ❿or ENTER button.

▼

To make the setup menu disappear, press the

Press the $/❷ buttons to select the desired item, then press the ❿or ENTER button.

MENU button.

❶

TV Aspect

CHANGING

SETUP MENU

Depending on a type of television you have, you may want to adjust the screen setting (aspect ratio).

- 4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.

- 4:3 Pan Scan : Select this for conventional size TVs when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)

- 16:9 Wide : You can view the full 16:9 picture on your wide screen TV.

❷

Still Mode

These options will help prevent picture shake in still mode and display small text clearer.

- Auto : When selecting Auto, Field/Frame mode will be automatically converted.

- Field : Select this feature when the screen shakes in the Auto mode.

- Frame : Select this feature when you want to see small letters more clearly in the Auto mode.

❸

Screen Messages

Use to turn on-screen messages On or Off.

❹

Black Level

Adjusts the brightness of the screen.(On or Off) It does not function in Progressive mode.

- PAL : In case of using PAL disc

• If your TV system only has NTSC-Video input, you must choose “NTSC”.

• If your TV system only has PAL input, you must choose “PAL ”.

❻

Video Output

Select Video Output.

- S-Video : Select when you want to use Video and S-Video Out.

- Component (I-SCAN) : Select when you want to use Component Interlace (525i) Out.

- Component (P-SCAN) : Select when you want to use Component Progressive (525p) Out.

• If the Yes/No selection in the Display Setup sub Menu is not made within 10 seconds, the screen returns to the previous menu.

Setup Menu

Changing

ENG-50

❺

TV System

- NTSC : In case of using NTSC disc

• If your TV system only has PAL-Video input, you must choose “PAL”. When you choose “PAL”, Interlace output format is PAL 60 Hz output.

• If your TV system only has NTSC, input you must choose “NTSC ”.

• Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.

• If Video Output is set incorrectly, the screen may be blocked.

ENG-51

Setup

PASSWORD CHECK

Enter Password

- - - -

0 ~ 9

RATING LEVEL

Level 8 Adult Level 7 Level 6 Level 5 Level 4 Level 3 Level 2 Level 1 Kids Safe

CHANGING

Setup

PARENTAL SETUP

Use Password : No

CREATE PASSWORD

Enter Password

- - - -

0 ~ 9

CREATE PASSWORD

Re-enter Password

- - - -

0 ~ 9

SETUP MENU

CHANGING

SETUP MENU

Setting Up the Parental Control

The Parental Control function works in conjunction with DVDs that have been assigned a rating, which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc.

With the unit in Stop mode, press the MENU button.

Press the $/❷ buttons to select Setup, then press the ❿or ENTER button.

Setup

Press the $/❷ buttons to select Parental Setup, then press the ❿or

ENTER button.

Setting Up the Rating Level

With the unit in Stop mode, press the MENU button.

Press the $/❷ buttons to select Setup, then press the ❿or ENTER button.

Setup

Press the $/❷ buttons to select Parental Setup, then press the ❿or ENTER button.

Enter your password.

Press the ❿or ENTER button to select Yes if you want to use a password. The Enter Password screen appears.

Enter your password. The Re-enter Password screen appears to confirm the password. Enter your password again. The player is locked ( ).

ENG-52

▼

To make the setup menu disappear, press the MENU button.

Press the $/❷ buttons to select Rating Level, then press the ❿or ENTER button.

Press the $/❷ buttons to select the Rating Level you want, then press the

❿

or ENTER button.

e.g) Setting up in Level 6.

ENG-53

▼

To make the setup menu disappear, press the MENU button.

For example, if you select up to Level 6, discs that contain Level 7,8 will not play.

Setup Menu

Changing

+ 61 hidden pages