Samsung DVD-P241 User Manual

US
DVD Player

DVD-P241

AK68-00342A
HEADQUARTERS 105 Challenger Road Ridgefield Park, NJ 07660-0511 TEL: 1-800-SAMSUNG
SERVICE DIVISION 400 Valley Road, Suite 201 Mount Arlington, NJ 07856 1-800-SAMSUNG (1-800-726-7864) www.samsungusa.com
2 3

Precautions

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury.
This symbol indicates important instructions accompanying the product.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : DVD PLAYERS USE AN INVISIBLE LASER BEAM WHICH CAN
CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE PLAYER CORRECTLY AS INSTRUCTED.
Do not install this equipment in a confined space such as a bookcase or similar unit.
WARNING : To prevent damage which may result in fire or electric shock hazard, do not
expose this appliance to rain or moisture.
CAUTIONS
Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Attention: Pour éviter les chocs électriques, introduíre la lame la plus large de la fiche dans la borne
correspondante de la prise et pousser jusqu au fond. This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections.
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This class B digital apparatus meets all requirements of the Canadian Interference -­Causing Equipment Regulations.
CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LÁSER CLASE 1

Important Safety Instructions

1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus.
13) Unplug this apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
14) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
4 5
Precautions
Handling Cautions
Disc Storage
Maintenance of Cabinet
• Before connecting other components to this player, be sure to turn them all off.
• Do not move the player while a disc is being played, or the disc may be scratched or broken, and the player’s internal parts may be damaged.
• Do not put a flower vase filled with water or any small metal objects on the player.
• Be careful not to put your hand into the disc tray.
• Do not place anything other than the disc in the disc tray.
• Exterior interference such as lightning and static electricity can affect normal operation of this player. If this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the AC power cord to the AC power outlet. The player will operate normally.
• Be sure to remove the disc and turn off the player after use.
• Disconnect the AC power cord from the AC outlet when you don’t intend to use the player for long periods of time.
• Clean the disc by wiping in a straight line from the inside to the outside of the disc.
Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.
• Do not keep under direct sunlight.
• Keep in a cool ventilated area.
• Store vertically.
• Keep in a clean protection jacket.
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.

Before You Start

If remote doesn’t operate
properly:
Remote Control
(AK59-00011K)
Batteries for
Remote Control (AAA Size)
(AC43-12002H)
User’s Manual
(AK68-00342A)
Video/Audio Cable
(AC39-42001R)
Open the battery cover on the back of the remote.
Insert two AAA batteries. Make sure that the polarities (+ and -) are aligned correctly.
Replace the battery cover.
• Check the polarity + - of the batteries (Dry-Cell)
• Check if the batteries are drained.
• Check if remote sensor is blocked by obstacles.
• Check if there is any fluorescent lighting nearby.
Accessories
Install Batteries in the
Remote
1 2
3
CAUTION
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
Note:
• This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere.
• This DVD player is designed and manufactured to respond to the Region Management Information. If the Region number of a DVD disc does not correspond to the Region number of this DVD player, the DVD player cannot play the disc.
• This device is protected by U.S. patent numbers 4,631,603, 4,577,216, 4,819,098 and 4,907,093 and other intellectual property rights. The use of Macrovision’s copy protection technology in the device must be authorized by Macrovision and is intended for home and other limited pay-per-view uses only, unless otherwise authorized in writing by Macrovision. Reverse engineering or disassembly is prohibited.
Setup
Important Safety Instructions
........................................................................................
2
Precautions ..................................................................................................................3
Before you start ..........................................................................................................5
General Features ........................................................................................................8
Disc Type and Characteristics
......................................................................................
9 Description-Front Panel
..............................................................................................
10
Description-Rear Panel
..............................................................................................
11
Tour of the Remote Control
........................................................................................
12
Connections
Choosing a Connection
..............................................................................................
14
Basic Functions
Playing a Disc
............................................................................................................
16
Using the Search & Skip Functions
..........................................................................
18
Using the Display Function
........................................................................................
19
Using the Disc and Title Menu ..................................................................................20
Using the Function Menu ..........................................................................................21
Repeat Play
................................................................................................................
22 Program Play & Random Play
....................................................................................
23
Advanced Functions
Adjusting the Aspect Ratio (EZ View)
........................................................................
24 Slow Repeat play
........................................................................................................
26 Selecting the Audio Language
....................................................................................
27 Selecting the Subtitle Language
................................................................................
28 Changing the Camera Angle
......................................................................................
29 Using the Instant Replay/Skip Function
....................................................................
30 Using the Bookmark Function
....................................................................................
31 Using the Zoom Function
..............................................................................................
32
Clips Menu for MP3/JPEG ........................................................................................33
Folder Selection ........................................................................................................34
MP3 Play
....................................................................................................................
35 Picture CD Playback
..................................................................................................
37
Changing Setup menu
Using the Setup Menu
................................................................................................
39
Setting Up the Language Features
............................................................................
40
Setting Up the Audio Options
....................................................................................
42
Setting Up the Display Options
..................................................................................
43
Setting Up the Parental Control
..................................................................................
45
Reference
Troubleshooting
..........................................................................................................
47
Specifications
..............................................................................................................
48
Warranty
......................................................................................................................
49
6 7

Table of contents Table of contents

SETUP
CONNECTIONS
BASIC
FUNCTIONS
ADVANCED
FUNCTIONS
CHANGING
SETUP MENU
REFERENCE
SETUP

General Features

This DVD player is capable of playing the following types of discs with the corresponding logos:
Both the DVD player and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
8 9
Play Region Number

Disc Type and Characteristics

5"
31/2"
Single-sided
240 min.
Double-sided
480 min.
Single-sided
80 min.
Double-sided
160 min.
Audio
+
Video
Audio
• CD is recorded as a Digital Signal with better audio quality, less distortion and less deterioration of audio quality over time.
• DVD contains excellent sound and video due to Dolby Digital and MPEG-2 system.
• Various screen and audio functions can be easily selected through the on­screen menu.
AUDIO-CD
5"
31/2"
74 min.
20 min.
Disc Types
(Logos)
Recording
Types
Disc Size
Max.
Playing Time
Characteristics
DVD
~
DIGITAL
SOUND
STEREO
NTSC
• Play Region Number • NTSC broadcast system in U.S.A, Canada, Korea, Japan, etc.
• Dolby Digital disc • Stereo disc
• Digital Audio disc
• DTS disc
• MP3 disc
Disc Markings
Excellent Sound
Dolby Digital, a technology developed by Dolby Laboratories, provides crystal clear sound reproduction.
Screen
Both regular and widescreen(16:9) pictures can be viewed.
Slow Motion
An important scene can be viewed in slow motion.
Programmed Play
You can program tracks to play in desired order. (CD)
Parental Control
The parental control allows users to set the level necessary to prohibit children from viewing harmful movies such as those with violence, adult subject matter, etc.
Various On-Screen Menu Functions
You can select various languages (Audio/Subtitle) and screen angles while enjoying movies.
Progressive Scan
Progressive scanning creates an improved picture with double the scan lines of a conventional interlaced picture.
EZ VIEW
Easy View can convert Letter Box images to full screen viewing on your conventional TV.
Digital Photo Viewer (JPEG)
You can view Digital Photos on your TV.
Repeat
You can repeat a song or movie simply by pressing the REPEAT button.
MP3
This unit can play discs created from MP3 files.
Instant Replay
This function is used to replay the previous 10 seconds of the movie from the current position.
Instant Skip
This function skips playback ahead 10 seconds.
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD
discs.
• This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
* Discs which cannot be played with this player.
DVD-ROM DVD-RAM
CD-ROM • CDV
CDI
HD layer of super Audio CD
CDGs play audio only, not graphics.
* Ability to play back may depend on recording
conditions.
DVD-R, +R CD-RW
DVD+RW, -RW
* It may not play CD-R, CD-RW and DVD-R in all
cases due to the type of disc or condition of the recording.
NOTE
COPY PROTECTION
SETUP

Description-Front Panel

10 11

Description-Rear Panel

COAXIAL
A U D I O
V I D E O
R - AUDIO - LTVVIDEO S-VIDEO
1. DIGITAL AUDIO OUT JACKS
• Use either a coaxial digital cable to connect to a compatible Dolby Digital receiver. Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
2. ANALOG AUDIO OUT JACKS
• Connect to the Audio input jacks of your television, audio/video receiver, or VCR.
3. VIDEO OUT JACK
• Use a video cable to connect to the Video input jack on your television.
• The Video Output in Setup Menu must be set to the 525i or S-Video.
4. S-VIDEO OUT JACK
Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher picture quality.
• The Video Output in Setup Menu must be set to the S-Video.
5. COMPONENT VIDEO OUT JACKS
• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y video. Along with S-Video, Component Video provides the best picture quality.
• If 525p Video Output is selected in Setup Menu, progressive scan mode will work.
• If 525i Video Output is selected in Setup Menu, interlaced scan mode will work.
12345
Rear Panel
• Consult your TV User’s Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User’s Manual’s instructions regarding Progressive Scan settings in the TV’s menu system.
• If 525P Video Output is selected in Setup Menu, Video and S-Video will not work.
• See page 44 to get more information on how to use the setup menu.
Important Note
1
2
34 56 7 8 9 10
1. STANDBY/ON ( )
• When the player is plugged in, the Power LED lights. If you press the STANDBY/ON button to turn on the player, the LED goes out.
2. SKIP ( )
• Use to skip a scene or music.
3. STOP ( )
• Stops disc play.
4. PLAY/PAUSE ( )
• Begin or pause disc play.
5. SKIP ( )
• Use to skip a scene or music.
6. EZ VIEW
• Easy View can convert Letter Box images to full screen viewing on your conventional TV.
7. OPEN/CLOSE ( )
• Press to open and close the disc tray.
8. PLAY
• When playing the disc, the Play LED lights.
9. LOADING
• When loading the disc, the Loading LED lights.
10. DISC TRAY
• Place the disc here.
Front Panel Controls
Power LED Play LED Loading LED
(Red) (Green) (Yellow)
Power off/Standby O X X
No disc X X O
Stop X X O
Loading X X Blinks
Play/Skip X O X
Search/Pause X Blinks X
Error Blinks Blinks Blinks
STANDBY/ON
EZ VIEW LOADINGPLAY
SETUP

Tour of the Remote Control

12 13
Tour of the Remote Control
111
12 13
14
15 16
17
18
19
20 21
22
2
3
4
5
6 7
8
9
10
1. DVD POWER Button
• Turns the power on or off.
2. NUMBER Buttons
3. PROG Button
• Allows you to program a specific order.
4. STEP Button
• Advances play one frame at a time.
5. SEARCH/SKIP buttons ( / , / )
• Allows you to search forward/backward through a disc. Use to skip the title, chapter or track.
6. STOP Button ( )
7. MENU Button
• Brings up the DVD player’s setup menu.
8. RETURN Button
• Returns to a previous menu.
9. REPEAT A-B Button
• Use to mark a segment to repeat between A and B.
10. SUBTITLE Button
11. OPEN/CLOSE ( ) button
• To open and close the disc tray.
12. CLEAR Button
• Use to remove menus or status displays from the screen.
13. INSTANT REPLAY Button
• This function is used to replay the previous 10 seconds of the movie from the current position.
14. INSTANT SKIP Button
• This function skips playback ahead 10 seconds.
15. PLAY/PAUSE Button ( )
• Begin/Pause disc play.
16. INFO Button
• Displays the current disc mode.
17. DISC MENU Button
• Brings up the Disc menu.
18. ENTER/DIRECTION Button (UP/DOWN or LEFT/RIGHT Buttons)
• This button functions as a toggle switch.
19. EZ VIEW Button
• Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
20. REPEAT Button
• Allows you to repeat play a title, chapter, track, or
disc.
21. ANGLE Button
• Use to access various camera angles on a DVD.
22. AUDIO Button
• Use this button to access various audio functions on
a disc.
DVD Function Buttons
CONNECTIONS
14 15

Choosing a Connection Choosing a Connection

The following shows examples of connections commonly used to connect the DVD player with a TV and other components.
Before Connecting the DVD Player
Connection to an Audio System
• Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.
• Refer to the owner’s manual of the additional components you are connecting for more information on those particular components.
TV (Normal, Widescreen, Projection, etc..)
Good
picture
Basic Audio
Better
picture
Best
picture
Method 1
Method 2
Method 3
Optimum
picture
Method 4
R - AUDIO - L
VIDEO S-VIDEO
Audio Output Jacks
OR OR
AV Cable
S-Video
Cable
Video
Cables
Video Output Jack
S-Video Jack
Component Video Jacks Component Video Jacks
DVD Player + TV with Video Input Jack (The Video Output in Setup Menu must be set to the S-Video or 525i.)
DVD Player + TV with S-Video Input Jack (The Video Output in Setup Menu must be set to the S-Video.)
DVD Player + TV with Component Video Jacks (The Video Output in Setup Menu must be set to the 525i.)
DVD Player + TV with Progressive Scan Jacks. (The Video Output in Setup Menu must be set to the 525p.)
• If 525p Video Output is selected in Setup Menu, Video and S-Video will not work.
• Depending on your TV, your hookup for Method 4 may differ from the illustration.
• If you want to convert Video Output to the Progressive Scan, you have to first connect Video or S-Video on your TV. Then select 525p(480p) out of Video Output in Setup Menu. Within 10 seconds, change the TV’s external input to 525p(480p or Component) and select "Yes" (See Page 44)
Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive Scan is supported, follow the TV User’s Manual’s instructions regarding Progressive Scan settings in the TV’s menu system.
Important Note
Connection to a TV (For Video)
TV
DVD
Player
Method 1
Method 2
Method 3
Method 4
Method 1 Method 2
R - AUDIO - L
COAXIAL
Analog Audio Out Digital Audio Out
2ch Amplifier
Audio Input Jacks
Dolby Digital Decoder
Digital Audio Input Jack
AUDIO
SYSTEM
DVD
Player
Loading...
+ 17 hidden pages