Samsung DVD-1080P9-XAA User Manual

DVD Player

user manual

DVD-1080P9 DVD-1080PR

AK68-01750A(02)

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/global/register

getting started

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with a dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus

(including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has

two blades with one wider than the other. A grounding type plug has two blades and a third

grounding prong.

The wide blade or the third prong are provided for your safety. If the provided plug does not fit

into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched: particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long peroids of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been

damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

2_ getting started

Precautions

● GETTING STARTED

This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.

Do not install this equipment in a confined space such as a bookcase or similar unit.

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPARATUS TO RAIN OR MOISTURE.

Note to CATV system installer : This reminder is provided to call CATV system installer’s attention to Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I) that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. Caution : FCC regulations state that any unauthorized changes or modifications to this equipment may void the user’s authority to operate it.

• Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

• If this power supply is used at 240V ac, a suitable plug adapter should be used.

FCC NOTE (for U.S.A):

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help. This class B digital apparatus meets all requirements of the Canadian Interference --

Causing Equipment Regulations.

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

CALIFORNIA USA ONLY :

This Perchlorate warning applies only to primary CR (Maganese Dioxide) Lithium coin cells in the product sold or distributed ONLY in California USA “Perchlorate Material - special handling may apply”, See www.dtsc. ca.gov/hazardouswaste/perchlorate.

CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LÁSER CLASE 1

English _3

getting started

CAUTION

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

Note:

•

This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere.

•

This DVD player is designed and manufactured to respond to the Region Management Information. If the Region number of a DVD disc does not correspond to the Region number of this DVD player, the DVD player cannot play the disc.

Handling Cautions

• Before connecting other components to this player, be sure to turn them all off.

• Do not move the player while a disc is being played, or the disc may be scratched or broken, and the player’s internal parts may be damaged.

• Do not put a flower vase filled with water or any small metal objects on the player.

• Be careful not to put your hand into the disc tray.

• Do not place anything other than the disc in the disc tray.

• Exterior interference such as lightning and static electricity can affect normal operation of this player. If this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the AC power cord to the AC power outlet. The player will operate normally.

• Be sure to remove the disc and turn off the player after use.

• Disconnect the AC power cord from the AC outlet when you don’t intend to use the player for long periods of time.

• Clean the disc by wiping in a straight line from the inside to the outside of the disc.

• The Main plug is used as a disconnect device and shall stay readily operable at any time.

Disc Storage

Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.

• Do not keep under direct sunlight.

• Keep in a cool ventilated area.

• Store vertically.

• Keep in a clean protection jacket.

Maintenance of Cabinet

For safety reasons, be sure to disconnect the AC power cord from the AC outlet.

• Do not use benzene, thinner, or other solvents for cleaning.

• Wipe the cabinet with a soft cloth.

4_ getting started

Before you start

Accessories

Remote Control (AK59-00084Q)

Batteries for

Remote Control

(AAA Size)

(AC43-12002H)

Install Batteries in the Remote control

Open the battery cover on the back of the remote control.

Insert two AAA batteries. Make sure that the polarities (+ and -) are aligned correctly.

User’s Manual

(AK68-01750A)

Video/Audio

Cable

(AC39-42001U &

AC39-22017Z)

● GETTING STARTED

Replace the battery cover.

If the remote control doesn’t operate properly:

- Check the polarity + - of the batteries.

- Check if the batteries are drained.

- Check if the remote control sensor is blocked by obstacles.

- Check if there is any fluorescent lighting nearby.

English _5

getting started

GETTING STARTED

CONNECTIONS

BASIC FUNCTIONS

ADVANCED FUNCTIONS

3 Precautions 5 Before you Start 7 General features 8 Disc Type and Characteristics 9 Description 11 Tour of the Remote Control

12 Choosing a Connection 12 Connecting to a TV with HDMI Jack 12 Connecting to a TV with DVI Jack 14 Connecting to a TV (Progressive) 15 Connecting to a TV (Interlace) 16 Connecting to a TV (Video) 17 Connecting to an Audio System (2 Channel

Ampliﬁ er)

18 Connecting to an Audio System (Dolby

digital, MPEG2 or DTS Ampliﬁ er)

Playing a Disc

Using the Search and Skip Functions

Using the Display Function

Using the Disc and Title Menu

Repeat Play

Slow Play

Adjusting the Aspect Ratio (EZ View)

Selecting the Audio Language

Selecting the Subtitle Language

Changing the Camera Angle

Using the Bookmark Function

Using the Zoom Function

Clips Menu for MP3/WMA/JPEG/MPEG4/ CD Audio 32

Folder Selection 33

MP3/WMA/CD Audio Playback 35

MPEG4 Playback 37

Playing Media Files using the USB HOST

feature 39

CD Ripping 40

Picture CD Playback 41

Picture CD Playback for HD-JPEG

NAVIGATING THE SETUP MENU

REFERENCE

6_ getting started

Using the Setup Menu 44

Setting Up the Language Features 49

Setting Up the Audio Options 51

Setting Up the Display Options 53

Setting Up the Parental Control 55

Setting Up HDMI 56

Setting Up Anynet+(HDMI-CEC) 58

Setting Up the Picture Quality 59

Setting Up the BD Wise

Firmware Upgrade 62

Troubleshooting 63

Specifications

General Features

Excellent Sound

Dolby Digital, a technology developed by Dolby Laboratories, provides crystal clear sound reproduction.

Screen

Both regular and widescreen(16:9) pictures can be viewed.

Slow Motion

An important scene can be viewed in slow motion.

1080p Playback

This player upconverts regular DVDs for playback on 1080p TVs.

Parental Control (DVD)

The parental control allows users to set the level necessary to prohibit children from viewing harmful movies such as those with violence, adult subject matter, etc.

Various On-Screen Menu Functions

You can select various languages (Audio/Subtitle) and screen angles while enjoying movies.

Progressive Scan

Progressive scanning creates an improved picture with double the scan lines of a conventional interlaced picture.

EZ VIEW (DVD)

Easy View enables picture adjustment to match your TV's screen size (16:9 or 4:3).

Digital Photo Viewer (JPEG)

You can view Digital Photos on your TV.

Note

- Discs which cannot be played with this player.

• DVD-ROM • DVD-RAM

• CD-ROM • CDV

• CDI • CVD

• CDGs play audio only, not graphics.

- Ability to play back may depend on recording conditions.

• DVD-R, +R

• CD-RW

• DVD+RW, -RW (V mode)

- The unit may not play certain CD-R, CD RW and DVD-R due to the disc type or recording conditions.

COPY PROTECTION

Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs.

This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

● GETTING STARTED

Repeat

You can repeat a song or movie simply by pressing the REPEAT button.

MP3/WMA

This unit can play discs created from MP3/WMA files.

MPEG4

This unit can play MPEG4 formats within an avi file.

HDMI (High Definition Multimedia Interface)

HDMI reduces picture noise by allowing a pure digital video/audio signal path from the player to your TV.

CD Ripping

This feature lets you to copy audio files from a disc into MP3 format on a USB device. (Audio CD only (CD DA)).

PROGRESSIVE SCAN OUTPUTS (480p, 720p, 1080p)

“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE, IF PROGRESSIVE SCAN PICTURE PROBLEMS OCCUR, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ (VIDEO) OUTPUT. IF THERE ARE QUESTIONS REGARDING YOUR TV SET COMPATIBILITY WITH THIS DVD PLAYER, PLEASE CONTACT SAMSUNG'S CUSTOMER SERVICE CENTER.”

English _7

getting started

Disc Type and Characteristics

This DVD player is capable of playing the following types of discs with the corresponding logos:

Disc Types (Logos)

DVD

AUDIO-CD

Disc Markings

Play Region Number

NTSC

STEREO

DIGITAL SOUND

NTSC broadcast system in U.S.A, Canada, Korea, Japan, etc.

Dolby Digital disc

Stereo disc

Digital Audio disc

DTS disc

Recording Types Disc Size Max. Playing Time

Single-sided 240 min.

5”

Audio

Video

Audio

3 1/2”

Double-sided 480 min.

Single-sided 80 min.

Double-sided 160 min.

5”

74 min.

20 min.

Region Number

Both the DVD player and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play.

The Region Number for this player is described on the rear panel of the player.

Characteristics

- DVD contains excellent sound and video due to Dolby Digital and MPEG-2 system.

- Various screen and audio functions can be easily selected through the on-screen menu.

- CD contains Digital content with better audio quality, less distortion and less deterioration of audio quality over time.

MP3 disc

You must only insert one DVD disc at a time. Inserting two or more discs will not allow playback and may cause damage to the DVD player.

8_ getting started

DivX Certification

DivX, DivX Certified,

and associated logos are

trademarks of DivXNetworks, Inc and

are used under license

Description

DVD

HDMI 1080iP720P

234

USB

Front Panel Controls

● GETTING STARTED

1. DISC TRAY

Place the disc here.

2. OPEN/CLOSE ( )

Press to open and close the disc tray.

3. DISPLAY

Operation indicators are displayed here.

4. PLAY/PAUSE ( )

Begin or pause disc play.

5. SKIP ( ) / SEARCH

Use to forward skip a scene or music.

Front Panel Display

6. STOP ( )

Stops disc play.

7. SKIP ( ) / SEARCH

Use to reverse skip a scene or music.

8. USB HOST

Connect a digital still camera, MP3 player, memory stick,

Card reader and other removable storage devices.

9. STANDBY/ON ( )

Turn On/Off the DVD Player.

1. Disc Indicator : DVD Video, Audio CD, CD-R/RW, DVD-R/RW/RAM, DVD+R/RW

2. DVD VIEW indicator

3. CD indicator

4. USB indicator

5. Disc Media indicator : DVD-R, DVDRW, DVD+R, DVD+RW

6. HDMI indicator : HDMI 480P ➔ “HDMI”, HDMI 720P ➔ “HDMI + 720P”, HDMI 1080i ➔ “HDMI + 1080i”, HDMI 1080P ➔ “HDMI + 1080P”

7. Displays the Total playing time and various messages concerning operations such as PLAY, STOP, LOAD ...

noDISC: No disc loaded.

OPEN: The disc tray is open.

LOAD: Player is loading disc information.

English _9

getting started

Rear Panel

1. AUDIO OUT JACKS

- Use audio cables to connect to the Audio input jacks of your television or audio/video receiver

2. DIGITAL AUDIO JACKS

- Use either an coaxial digital cable to connect to a

compatible Dolby Digital receiver.

- Use either an coaxial digital cable to connect to an A/V

Amplifier that contains a Dolby Digital, MPEG2 or DTS decoder.

3. VIDEO OUT JACK

- Use a video cable to connect to the Video input jack

on your television.

4. COMPONENT VIDEO OUT JACKS

- Use these jacks if you have a TV with Component Video in jacks. These jacks provide PR, PB and Y video.

- If

P-SCAN

Setup Menu, progressive scan mode will work.

- If

I-SCAN

Menu, interlaced scan mode will work.

5. HDMI OUT JACK

- Use an HDMI cable to connect this jack to the HDMI jack on your television for the best quality picture.

- If an HDMI cable is connected to an HDMI-compatible TV, HDMI will be output automatically from the player about 10 seconds later.

is set to “ON” in Video Output of the Setup

is set to “ON” in Video Output of the

Note

- Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN).

If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.

- The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conversion

adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI input.

- Refer to the TV's instruction manual for detailed information regarding the TV’s HDMI input jack.

- See pages 51~ 52 to get more information on how to use the setup menu.

10_ getting started

Tour of the Remote Control

3 4

19 20

21 22

5 6

7 8

23 24 25

10 11

26 27

13 14 15

1. DVD POWER Button

Turns the power on or off.

2. NUMBER Buttons

3. SUBTITLE (Number 4) Button

4. TITLE MENU (number 7) Button

Brings up the Title menu.

5. ZOOM/-/-- Button

Enlarges the DVD Picture.

Use this button to select additional channel broadcast

by the same TV network.(For example: 5-1).

6. TV VOL (+, -) Buttons

Control volume.

7. SEARCH Buttons (

Allow you to search forward/backward through a disc.

8. VIDEO SEL. Button

Changes video output mode

)

28 29

30 31

9. SKIP Buttons (

Use to skip the title, chapter or track.

10. STOP Button ( )

11. MENU Button

Brings up the DVD player’s menu.

12. ENTER/π/†,√/® Buttons

This button functions as a toggle switch.

13. INFO Button

Displays the current disc mode.

14. DISC MENU Button

Brings up the Disc menu.

15. OPEN/CLOSE ( ) Button

To open and close the disc tray.

16. HDMI SEL. Button

HDMI Output resolution setup.

17. DVD Button

Use to operate DVD.

18. TV Button

Use to operate a Samsung TV.

19. EZ VIEW (Number 6) Button

The aspect ratio of a picture can easily be adjusted

according to the screen size of your TV (16:9 or 4:3).

20. AUDIO (Number 5) Button

Use this button to access various audio functions on a disc.

21. BOOKMARK (Number 9) Button

22. REPEAT A-B (Number 8) Button

Allows you to repeat play a chosen section (A-B) on a disc.

23. STEP/TV SOURCE Button

Advances play one frame at a time.

24. TV CH ( , ) Buttons

Channel selection.

25. PAUSE Button ( )

Pause disc play.

26. PLAY Button ( )

Begins disc play.

27. RETURN Button

Returns to a previous menu.

28. EXIT Button

Exit the on-screen menu.

29. CANCEL Button

Use to remove menus or status displays from the screen.

30. USB Button

31. REPEAT Button

Allows you to repeat play a title, chapter, track, or disc.

)

● GETTING STARTED

English _11

connections

Choosing a Connection

The following shows examples of connections commonly used to connect the DVD player with a TV and other components.

Before Connecting the DVD Player

- Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.

- Refer to the user’s manual of the additional components (such as a TV) you are connecting for more information on those particular components.

Connecting to a TV with HDMI Jack

HDMI provides the best picture quality of all the connections.

Using an HDMI-HDMI cable (not included) connect the HDMI OUT jack on the rear of the DVD player to the HDMI IN jack of

your TV.

Press the input selector button on your TV remote control until the HDMI signal from the DVD player appears on your TV screen.

HDMI cable (Not Included)

Connecting to a TV with DVI Jack

Using an HDMI-DVI cable (not included), connect the HDMI OUT jack on the rear of the DVD player to the DVI IN jack of

your TV.

Using the audio cables, connect the AUDIO (red and white) OUT jacks on the rear of the DVD player to the AUDIO (red and white) IN jacks of your TV.

Turn on your DVD player and TV.

Press the input selector button on your TV remote control until the DVI signal from the DVD player appears on your TV screen.

12_ connections

WHITE

Audio Cable (Included)

RED

WHITE

HDMI-DVI cable (Not Included)

HDMI VIDEO Specifications

When you press the HDMI SEL. button, the 480p, 720p, 1080i and 1080p resolutions are selected in order. The first press of the HDMI SEL. button, brings up the current resolution.

The second press allows you to change the HDMI output resolution.

- Depending on your TV, certain HDMI output resolutions may not work.

- Please refer to the user's manual of your TV.

- If an HDMI or HDMI-DVI cable is plugged into TV, the DVD player’s output is set to HDMI automatically about 10 seconds later.

- For better picture quality, set the HDMI output resolution to 720p, 1080i or 1080p (see page 52)

- This player upconverts regular DVDs for playback on 1080p TVs. It does not play HD DVDs or Blu-Ray discs.

- If you connect an HDMI cable between a Samsung TV and this DVD player, you can operate this DVD

player using your TV remote control. This is only available with Samsung TVs that support Anynet+(HDMI-

CEC).(see page 56-57)

- If your TV has an

• HDMI (High Definition Multimedia Interface)

HDMI enables you to make a digital video and audio connection with a single cable. Using HDMI, the DVD player transmits a digital video and audio signal which displays a vivid picture on a TV having an HDMI input jack.

• HDMI connection description

HDMI connector - Video and audio are transferred digitally without compression (LPCM or Bit Stream

data).

- The player outputs a pure digital signal to the TV through an HDMI cable.

- If your TV does not support HDCP (High-bandwidth Digital content protection), snow noise appears on the screen.

• Why does Samsung use HDMI?

Analog TVs require an analog video/audio signal. However, when playing a DVD, the signal transmitted to a TV is digital. Therefore either a digital-to-analog converter (in the DVD player) or an analog-to-digital converter (in the TV) is required. During this conversion, the picture quality is degraded due to noise and signal loss. HDMI technology is superior because it requires no D/A conversion and is a pure digital signal from the player to your TV.

• What is HDCP?

HDCP (High-bandwidth Digital Content Protection) is a system for protecting DVD content output via HDMI/DVI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV, projector, etc). Content is encrypted at the source device to prevent unauthorized copies from being made.

logo, then it supports the Anynet+ function.

● CONNECTIONS

English _13

connections

Connecting to a TV (Progressive)

- Connecting to your TV using Component video cables. The 480p resolution is possible with this connection.

- What is "Progressive Scan"?

Progressive scan has twice as many scanning lines as the interlace output method and provides

better and clearer picture quality.

Using Component video cables (not included), connect the COMPONENT VIDEO OUT jacks on the rear of the DVD player to the COMPONENT IN jacks of your TV.

Audio Cable (Included)

WHITE

GREEN

RED

GREEN

BLUE

Component cable (not included)

RED

WHITE

RED

BLUE

Using the audio cables, connect the AUDIO (red and white) OUT jacks on the rear of the DVD player to the AUDIO (red and white) IN jacks of your TV.

Turn on the DVD player and TV.

Set the Video Output to P-SCAN in the Display Setup menu. (See pages 51 to 52) You can also use the VIDEO SEL. button to change the Video Output mode. (See page 16)

Press the input selector button on your TV remote control until the Component signal from the DVD player appears on the TV screen.

To see the progressive video output,

- Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.

- Depending on your TV, the connection method may differ from the illustration above.

14_ connections

Connecting to a TV (Interlace)

- Connecting to your TV using Component video cables. The 480i resolution is possible with this connection.

- This is the best available connection if your TV is not capable of receiving a Progressive Scan signal.

- You will enjoy excellent quality and accurate color reproduction images. Component video separates the picture element into black and white(Y), blue(P

), red(PR) signals to present clear

and clean images. (Audio signals are delivered through the audio output.)

Using Component video cables (not included), connect the COMPONENT VIDEO OUT jacks on the rear of the DVD player to the COMPONENT IN jacks of your TV.

Using the audio cables, connect the AUDIO (red and white) OUT jacks on the rear of the DVD player to the AUDIO (red and white) IN jacks of your TV.

Turn on your DVD player and TV.

WHITE

RED

GREEN

BLUE

RED

● CONNECTIONS

Set the Video Output to I-SCAN in the Display Setup menu. (See pages 51 to 52) You can also use the VIDEO SEL. button to change the Video

Audio Cable (Included)

WHITE

RED

BLUE

GREEN

Component cable (not included)

Output mode. (See page 16)

Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV screen.

Note

- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 17 to 18)

- The Component jacks of your TV may be marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “P depending on the manufacturer. The number and position of the jacks may vary depending on the TV set. Please refer to the user's manual of your TV.

, PB, Y”

English _15

connections

Connecting to a TV (Video)

Using Video/Audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT jacks on the rear of the DVD player to the VIDEO (yellow)/AUDIO (red and white) IN jacks of your TV.

Turn on your DVD player and TV.

Set the Video Output to I-SCAN in the Display Setup menu. (See pages 51 to 52). You can also use the VIDEO SEL. button to change the Video Output mode.

WHITE

Audio Cable (Included)

RED

YELLOW

Video Cable (Included)

WHITE

RED

YELLOW

Press the input selector button on your TV remote control until the Video signal from the DVD player appears on the TV screen.

Note

- Noise may be generated if the audio cable placed too close to the power cable.

- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 17 to 18)

- The number and position of the jacks may vary depending on your TV set. Please refer to the user's

manual of your TV.

- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) jack of the DVD

player.

- If you press the VIDEO SEL. button when the DVD Player is in stop mode or no disc is inserted, the Video

Output mode changes in the following sequence: (I-SCAN ➝ P-SCAN).

16_ connections

Connecting to an Audio System (2 Channel Amplifier)

Using the audio cables, connect the AUDIO (red and white) OUT jacks on the rear of the DVD player to the AUDIO (red and white) IN jacks of the Amplifier.

Using the video signal cable(s), connect the HDMI, COMPONENT or VIDEO OUT jacks on the rear of the DVD

player to the HDMI/DVI, COMPONENT or VIDEO IN jack of your TV as described on pages 12 to 16.

Turn on your DVD player, TV, and Amplifier.

WHITE

RED

Audio Cable (Included)

2-Channel stereo amp

RED

WHITE

Press the input select button of the Amplifier to select the audio input your DVD player is connected to in order to hear sound. Refer to your Amplifier's user manual to set the Amplifier's audio input.

Note

- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears.

- Please set the audio in the menu screen according to the Amplifier.(See pages 49 to 50)

- The position of jacks may vary depending on the Amplifier. Please refer to your Amplifier’s user's manual.

● CONNECTIONS

English _17

connections

Connecting to an Audio System (Dolby Digital, MPEG2 or DTS Amplifier)

If using a Coaxial cable (not included), connect the DIGITAL AUDIO (COAXIAL) jack on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) jack of the Amplifier.

Using the video signal cable(s), connect the HDMI, COMPONENT or VIDEO OUT jacks on the rear of the DVD

player to the HDMI/DVI, COMPONENT or VIDEO IN jack of your TV as described on pages 12 to 16.

Turn on your DVD player, TV, and Amplifier.

Coaxial Cable (not included)

Dolby Digital or

DTS amp

Note

- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears.

- Please set the audio in the menu screen according to the Amplifier you have connected. (See pages 49 to 50)

- The position of jacks may vary depending on the Amplifier. Please refer to the user's manual of the Amplifier.

18_ connections

basic functions

Playing a Disc

Before Play

- Turn on your TV and set it to the Video Input your DVD player is connected to with your TV’s

remote control.

- If you connected the DVD player to an external Audio System, turn on your Audio System and

set it to the correct Audio Input.

● BASIC FUNCTIONS

After plugging in the player, the first time you press the DVD POWER button, the screen to the right appears: If you want to select a language, press a NUMBER button. (This screen will only appear when you plug in the player for the first time.) If the language for the startup screen is not set, the settings may change whenever you turn the power on or off. Therefore, make sure that you select the language you want to use. Once you select a menu language, you can change it by pressing the button on the front panel of the unit for more than 5 seconds with no disc in the unit. Then the SELECT MENU LANGUAGE window appears again where you can reset your preferred language.

Playback

Press the OPEN/CLOSE ( ) button and the tray

opens.

Place a disc gently into the tray with the disc’s label facing up.

Select Menu Language

Press 1 for English

Touche 2 pour Français

Drücken Sie 3 für Deutsch

Pulsar 4 para Español

Premere 5 per Italiano

Druk op 6 voor Nederlands

▼

Press the PLAY ( ) button or OPEN/CLOSE ( to close the disc tray.

) button

RESUME function

When you stop disc play, the player

remembers where you stopped, so when you press the PLAY (

) button again, it will pick up

where you left off.

English _19

basic functions

Stopping Play

Press the STOP ( ) button during play.

Removing the Disc Press the OPEN/CLOSE ( ) button.

Pausing Play Press the PAUSE ( STEP button on the remote

control during play.

Step Motion Play (Except CD)

Press the STEP button on the remote control during play.

) or

Note

- If the player is left in the stop mode for more than one minute without pressing any buttons, a screen saver will be activated. Press the PLAY (

) button to resume normal play.

- If the player is left in the stop mode for more than 30 minutes, the power will automatically turn off.

▼

Screen stops, no sound. To resume, press the PLAY (

again.

Note

If the player is left for about 5 minutes in pause mode, it will stop.

▼

Each time the button is pressed, a new frame

will appear. No sound is heard during STEP mode. Press the PLAY (

play. You can only perform step motion play in the

forward direction.

) button to resume normal

) button once

▼

No sound is heard during slow mode.

Slow Motion Play

Press the SEARCH ( button to choose the play speed between 1/2, 1/4, 1/8 and 1/16 of normal speed during PAUSE mode.

20_ basic functions

)

Press the PLAY (

play.

Note

- The (

- This player does not play HD DVDs or Blu-Ray discs.

) icon indicates an invalid button press.

) button to resume normal

Using the Search and Skip Functions

During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection.

Searching through a Chapter or Track

▼

During play, press the SEARCH ( or ) button on the remote control for more than 1 second.

Skipping Tracks

During play, press the SKIP ( or ) button.

If you want to search at a faster speed on the

DVD or CD, press and hold the button.

DVDCD2X, 4X, 64X, 128X

2X, 4X, 8X

Note

The speed marked in this function may be

different from the actual playback speed.

- No sound is heard during search mode (Except CD).

● BASIC FUNCTIONS

- When playing a DVD, if you press the SKIP ( ) button, it moves to the next chapter. If you press the SKIP ( ) button, it moves to the beginning of the chapter. Pressing the Skip button twice makes the DVD move to the beginning of the previous chapter.

- When playing a CD, if you press the SKIP ( ) button, it moves to the next track. If you press the SKIP ( ) button, it moves to the beginning of the track. Pressing the Skip button twice makes the CD move to the beginning of the previous track.

English _21

+ 47 hidden pages